Hi,
I have made a little tool to check if there's any new firmwares on the FUS servers. No more need of starting Kies to check for new firmware!
* Automatically checks for new firmware update! (Pro only)
* Notifies the user with signal and vibration if a new firmware is released. (Pro only)
* Finds your "Product Code" and "HIDSWVER"
* Use custom or presets of "Product Code" and "HIDSWVER"
* Send the output by email
* No ads (Pro Only)
* Check multiple regions automatically (Pro Only).
* Check multiple regions on one click (Pro Only).
* If you want me to add any presets to the list, just PM me and I'll add them.
If you have any suggestion on what to improve, just let me know!
You can find me on IRC in #project-voodoo on freenode if you want to chat.
You can find it on the market:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Direct market link: Check Fus Pro
Direct market link: Check Fus
Supported models:
Should work on any Samsung Device running Android
How to find correct Product Code, PDA, CSC and Phone.
From you device.
dial *#1234# and you will get pda, phone and csc.
Product code
*2767*4387264636#
Or
Product Code is connected to you region and/or carrier.
The easiest way is to take a look in the list on this page to find out which one you should have.
Let me then know your setup and I'll add it to the presets!
If you have the FUS-link the file looks like this
GT-I9000_I9000XXJPO_I9000OXAJPO_I9000XXJPP_I9000XXJPO_XX_XEU.zip.enc
Taken from SamsungFUSnews twitter
Model: GT-I9000 | Code: XEU | Version: I9000XXJPO/I9000OXAJPO/I9000XXJPP | Date: 29.10.2010 16:23 | Size: 168,81 MB | ID: 2695763114
ProductCode: GT-I9000HKDXEU
PDA: I9000XXJPO
PHONE: I9000XXJPP
CSC: I9000OXAJPO
Webbased checkFus
http://fus.nanzen.se/
Instruction on how to decrypt
.. can be found here
If you find this application useful, please consider a small donation at fus.nanzen.se to show you appreciation.
Many thanks! Super usefull!
Very usefull app but could you make it that it could read ProductCode, Phone, PDA, CSC from the phone (with ROOT permissions of course)?
yani2000 said:
Very usefull app but could you make it that it could read ProductCode, Phone, PDA, CSC from the phone (with ROOT permissions of course)?
Click to expand...
Click to collapse
Yes, I'm working on getting it to work, but I cant get the app to open the specified file. I get permission error. Any advice on how to read system files would help a lot! I have got SuperUser to grant root access.
Thank You for this. I must not anymore cheking new firmware with Kies or with login on Samfirmware. I was checking some product code with your apk , and i got really interesting result, but right.
Once more thanks
Best regards
yani2000 said:
Very usefull app but could you make it that it could read ProductCode, Phone, PDA, CSC from the phone (with ROOT permissions of course)?
Click to expand...
Click to collapse
Consider it done
Doesn't work on my i9000M (JH2). Just a black screen and that's all.
Doesn't work on SGS international with firmware jm9. Only black screen
Sent from my GT-I9000 using XDA App
at last now i don't have to fire up crappy kies to check for updates everytime... thanks a lot for the app..
and good support also, i just sent him my product code to be added to the list, and today it's there !!! thanks again !
sadly also doesn't work on my Sgs with JM8 and Voodoo, just got black screen...
greez
Samarkande said:
sadly also doesn't work on my Sgs with JM8 and Voodoo, just got black screen...
greez
Click to expand...
Click to collapse
The same...JM2+VOODOO...
Sorry for the problems!
I'll have a look at the black screen issue asap!
Just a question, have you rooted your device?
Can someone provide me with a logcat when starting the app?
LuffarJoh said:
Sorry for the problems!
I'll have a look at the black screen issue asap!
Just a question, have you rooted you device?
Click to expand...
Click to collapse
Yes and in the beggining it was asking for rooting permissions as usually..i said yes and after this..black screen..
Maybe app not working with strong modified FW (voodoo, etc.), only with stock FW ? Logical, fus server dont know what is voodoo modification, unknown FW. It is only my personal mind....
Regards
tonysac said:
Yes and in the beggining it was asking for rooting permissions as usually..i said yes and after this..black screen..
Click to expand...
Click to collapse
can you send me logcat when you are opening the application?
It's working on my JPA+hardcore kernel and also in a 1.6 emulator (not the auto-discover of product code though, because of not rooted).
LuffarJoh said:
can you send me logcat when you are opening the application?
It's working on my JPA+hardcore kernel and also in a 1.6 emulator (not the auto-discover of product code though, because of not rooted).
Click to expand...
Click to collapse
Explain pls what should i do....im too nube for this
miro666 said:
Maybe app not working with strong modified FW (voodoo, etc.), only with stock FW ? Logical, fus server dont know what is voodoo modification, unknown FW. It is only my personal mind....
Regards
Click to expand...
Click to collapse
It shouldnt be any difference, voodoo only modifies the kernel, and the app should start anyway, like any other application, its made to work on Android 1.6. Did it work prior the auto-discover of ProductCode and HIDSWVER?
tonysac said:
Explain pls what should i do....im too nube for this
Click to expand...
Click to collapse
The easiest way is to install SendLog from market, start Check Fus, when it have started and only shows black screen, exit the application and start SendLog and send the log to [email protected]
Thanks alot for your help!
ignore this post... wrong post.
LuffarJoh said:
It shouldnt be any difference, voodoo only modifies the kernel, and the app should start anyway, like any other application, its made to work on Android 1.6. Did it work prior the auto-discover of ProductCode and HIDSWVER?
The easiest way is to install SendLog from market, start Check Fus, when it have started and only shows black screen, exit the application and start SendLog and send the log to [email protected]
Thanks alot for your help!
Click to expand...
Click to collapse
Just send...hope it helps..
tonysac said:
Just send...hope it helps..
Click to expand...
Click to collapse
Thank you.
Unfortunately I cant see any error msg. Pls try this version instead. I have disabled root.
Related
I've written PHP script that pretends Kies application and asks Samsung's server about updates for given device. Reason for that was simple: I wanted to know about official Froyo release without manually checking it with Kies with registers hacks.
Download:
http://files.zajec.net/kies.updates.php.txt
Usage:
php kies.updates.php.txt
Requirements:
php with curl extension
Checking for other countries and devices:
Check last 4 lines in script and modify them. Syntax is simple:
getUpdateInfo('ANY-NAME', 'ProductCode', 'HIDSWVER');
Example:
Code:
Europe Countries / GT-I9000HKDXEU / I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3
---------------------------------------------------------------------------------
LATEST_FW_VERSION I9000XXJM1/I9000OXAJF3/I9000XXJM1/I9000XXJM1
BINARY_URI http://fus.samsungmobile.com/Phone_Binary/9/GT-I9000_I9000XXJM1_I9000OXAJM1_I9000XXJM1_I9000XXJM1_XX_XEU.zip.enc
LAST_MODIFIED 10/08/21
CURRENT_DISPLAYVERSION I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3
LATEST_DISPLAYVERSION I9000XXJM1/I9000OXAJM1/I9000XXJM1/I9000XXJM1
great, congrat. at last something useful appears here
woooooohoooooooo!!!!! thank you!
no more connecting the phone to the computer just to see if there is any new legit ROM release
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
moving topic to correct section
I inserted one row into line 126:
echo "<pre>";
for correct browser viewing
Nice app,
I someone doesn't have a php interpreter near at hand try using this http://www.coderun.com/ide/
Can someone help a complete noob on how to run this script? What tools/app do I need to get going?
Thanks!
Uploaded to my server but I am not sure what to change for unbranded UK XEU ?
Never mind. I think I got it.
Just a thought. Is there any way to add an RSS feed or something to this so it notifies me if anything changes. Instant notice of FROYO Yeah baby.
almaalma74 said:
I inserted one row into line 126:
echo "<pre>";
for correct browser viewing
Click to expand...
Click to collapse
Good idea, I've fixed script to generate nice HTML when not run from command line. Updated version can be found at the same place.
Tehpriest said:
Just a thought. Is there any way to add an RSS feed or something to this so it notifies me if anything changes. Instant notice of FROYO Yeah baby.
Click to expand...
Click to collapse
Should be possible, maybe will do that if I find some free time
jpaik said:
Can someone help a complete noob on how to run this script? What tools/app do I need to get going?
Thanks!
Click to expand...
Click to collapse
Sure enough.
1. Click on the link provided by Zajec, copy the php code ( CTRL+A manner).
2. Open the following link http://www.coderun.com/ide/
3. Click 'New'
4. Click 'PHP WebSite'
5. Click 'OK'
6. Click 'Run'
7. Wait some time for the window to load
8 Voila
Cheers
kapollo said:
Sure enough.
1. Click on the link provided by Zajec, copy the php code ( CTRL+A manner).
2. Open the following link http://www.coderun.com/ide/
3. Click 'New'
4. Click 'PHP WebSite'
5. Click 'OK'
6. Click 'Run'
7. Wait some time for the window to load
8 Voila
Cheers
Click to expand...
Click to collapse
A nother noob here, When you create a new PHP Website where do you copy the script into and do you have to remove the Hello World! script first?
chrisjwild said:
A nother noob here, When you create a new PHP Website where do you copy the script into and do you have to remove the Hello World! script first?
Click to expand...
Click to collapse
Sure you do.
kapollo, thank you!!
I'm not understanding one thing: where do I paste the php code?
Thanks.
Kies has been updated in order for the script to work you need to change the version of the Kies in the query inside the php code:
line 59: from 1.5.3.10093.82 to 1.5.3.10103.100
still no Froyo....
jpaik said:
kapollo, thank you!!
I'm not understanding one thing: where do I paste the php code?
Thanks.
Click to expand...
Click to collapse
When you click on the PHP Website, a new project will be created, and it will contain hello world, delete everything from that window, and paste Zajecs code.
Note this is a web app you do everything inside the web browser.
hope this helps.
cheers
Hello,
this morning I got the message that there is "No firmware info with the given data". Yesterday it worked perfektly. The data I'm using:
getUpdateInfo('Europe Countries', 'GT-I9000HKDDBT', 'I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3');
What could be the reason?
Maybe a fimware update?
memamu said:
Hello,
this morning I got the message that there is "No firmware info with the given data". Yesterday it worked perfektly. The data I'm using:
getUpdateInfo('Europe Countries', 'GT-I9000HKDDBT', 'I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3');
What could be the reason?
Click to expand...
Click to collapse
You haven't updated Kies version number, perhaps?
memamu said:
this morning I got the message that there is "No firmware info with the given data". Yesterday it worked perfektly. The data I'm using:
getUpdateInfo('Europe Countries', 'GT-I9000HKDDBT', 'I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3');
What could be the reason?
Click to expand...
Click to collapse
Kies was updated and Samsung changed protocol which Kies uses to check for firmware. That way my PHP script uses outdated protocol which does not work anymore. Will have to update it when I get my hands on new Kies.
Similar issue can be noticed when using old Kies. It was reported in: http://forum.xda-developers.com/showthread.php?p=9013623
OK, so there was not any real change in protocol. Samsung just banned old Kies versions. File available under http://files.zajec.net/kies.updates.php.txt works again.
It shows "I9000XXJPO/I9000OXAJPO/I9000XXJPP/I9000XXJPO" for Europe Countries,
"I9000XWJM2/I9000OXXJM1/I9000XXJM1/I9000XWJM2" for Poland (no branding).
Not sure what do to do now... Wait for Polish release or use version for Europe Countires?
Great work!
Do you think fus site is publishing the .enc files passkey too, somewhere within its webservice ?
I guess it should be reasonable, as Kies shouldn't know anyone at first...
Zajec5 said:
It shows "I9000XXJPO/I9000OXAJPO/I9000XXJPP/I9000XXJPO" for Europe Countries,
"I9000XWJM2/I9000OXXJM1/I9000XXJM1/I9000XWJM2" for Poland (no branding).
Not sure what do to do now... Wait for Polish release or use version for Europe Countires?
Click to expand...
Click to collapse
Does anyone know a working sequence for any eclair update for ITV (Italy - no branding) ?? Froyo not yet, but I can't manage to get either a 2.1 upgrade for such csc code.
Many thanks for any hint
In case you are interested a new Euro firmware has appeared :
P1000XXJK5 ## P1.PIT Version 2.2 2010 November DOWNLOAD
it is in the usual place < not sure if we are able to post links to it yet....>
Alex
Please note this is NOT a full flash so do NOT select repartition when flashing otherwise it won't boot.
Anyone try this yet? Any benefits or features of note?
Is Kies picking any updates up yet?
So far, so good.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-P1000 using Tapatalk
Interesting. Here's a reminder of the build details for JK1 (dial *#*#44336#*#*):
PDA: P1000XXJK1
PHONE: P1000XXJK1
CSC: P1000OXAJK1
BUILD TIME: 01/11/2010 20:10:05 KST
Change List: 589527
Should I go through the pain of re-installing all my apps, settings and root-tweaks just for the sake of a build 9 days more recent than JK1 ?
Going from JJK1 to JJK5:
If you select only "PDA", no PIT file/repartition, no Modem, no CSC and this file the update will not delete your user applications/data/...
Only thing I needed to do after was to re-root it.
PS: But better be safe than sorry and make a backup anyway
FredBE said:
Going from JJK1 to JJK5:
If you select only "PDA", no PIT file/repartition, no Modem, no CSC and this file the update will not delete your user applications/data/...
Only thing I needed to do after was to re-root it.
PS: But better be safe than sorry and make a backup anyway
Click to expand...
Click to collapse
I did the same, but from JID, same outcome. Was rather happy (I had made a full backup myself)
So, hooray I guess Now to test this bad boy out.
hey there,i got one question will Asia firmware P1000DXJJ1 direct flash to the JK5?or i need to flash to P1000XWJJ4 euro firmware??Thanks
FredBE said:
Going from JJK1 to JJK5:
If you select only "PDA", no PIT file/repartition, no Modem, no CSC and this file the update will not delete your user applications/data/...
Only thing I needed to do after was to re-root it.
PS: But better be safe than sorry and make a backup anyway
Click to expand...
Click to collapse
Success !
Dial *#*#44336#*#*:
PDA: P1000XXJK5
PHONE: P1000XXJK5
CSC: P1000OXAJK5
BUILD TIME: 10/11/2010 14:22:22 KST
Change List: 688590
Had to re-root, used the z4-Mod app this time (last time I did it entirely manually, via the shell). Reboot...all fine (so far)
EDIT: the system apps remained with their latest updates, but my XDA-sourced Gallery3D apk (in /system/app/) was replaced with the JK5 flash...not a big deal, I'll just overwrite it again, if the sensor bug comes back ! UPDATE: yep, Gallery sensor bug still here...app replaced !
EDIT: AdFree had to be re-activated (no big deal, just something to think about after flashing).
Upgraded from JK1 to JK5 too, without issue.
Regards,
Dave
daniel.weck said:
Success !
Dial *#*#44336#*#*:
PDA: P1000XXJK5
PHONE: P1000XXJK5
CSC: P1000OXAJK5
BUILD TIME: 10/11/2010 14:22:22 KST
Change List: 688590
Had to re-root, used the z4-Mod app this time (last time I did it entirely manually, via the shell). Reboot...all fine (so far)
EDIT: the system apps remained with their latest updates, but my XDA-sourced Gallery3D apk (in /system/app/) was replaced with the JK5 flash...not a big deal, I'll just overwrite it again, if the sensor bug comes back ! UPDATE: yep, Gallery sensor bug still here...app replaced !
EDIT: AdFree had to be re-activated (no big deal, just something to think about after flashing).
Click to expand...
Click to collapse
Have you noticed any signicant differences between the two versions? Any noticeable improvements? Worth doing it? I always like having the latest but with this being setup just the way I want it, I don't wanna risk not being to do it again. Thanks
Sent from my GT-P1000 using Tapatalk
ayman07 said:
Have you noticed any signicant differences between the two versions? Any noticeable improvements?
Click to expand...
Click to collapse
I don't notice any difference at all.
ayman07 said:
Worth doing it?
I always like having the latest but
Click to expand...
Click to collapse
Grabbing ROMs from unknown sources, without any change-log whatsoever is a little risky...the only reason for doing it is intellectual curiosity, and the confidence to restore the system if anything fails.
ayman07 said:
with this being setup just the way I want it, I don't wanna risk not being to do it again. Thanks
Click to expand...
Click to collapse
I was quite worried about flashing the PDA component over my nicely-configured Android machine (which took me some time to get how I wanted it to be)...so I made a full Titanium backup just in case (apps+data), and I took notes of the few changes I made to the core system. As it turned out, the transition to JK5 was very smooth, everything that's visible on the surface remained the same...I guess the real changes are buried under the hood...god knows exactly what changed !
How is the browser???? Still lagging????
cezarc1 said:
How is the browser???? Still lagging????
Click to expand...
Click to collapse
I don't know, I use Dolphin HD, xScope, Opera Mobile, Firefox Mobile, MIUI, ... anything but the stock browser (and no, there's no lag)
cezarc1 said:
How is the browser???? Still lagging????
Click to expand...
Click to collapse
Browser is the same.
I can't believe this is not the first thing they will be fixing!
daniel.weck said:
I don't notice any difference at all.
Grabbing ROMs from unknown sources, without any change-log whatsoever is a little risky...the only reason for doing it is intellectual curiosity, and the confidence to restore the system if anything fails.
I was quite worried about flashing the PDA component over my nicely-configured Android machine (which took me some time to get how I wanted it to be)...so I made a full Titanium backup just in case (apps+data), and I took notes of the few changes I made to the core system. As it turned out, the transition to JK5 was very smooth, everything that's visible on the surface remained the same...I guess the real changes are buried under the hood...god knows exactly what changed !
Click to expand...
Click to collapse
i appreciate the thorough response. ill hold off for the next release.
hi all !
where is link for the firmware please ?
Thank's
Sorry fo my english
edit: resolved
FYI, I've started a new thread to discuss the issue of compiled ROM versus open-source code from Samsung:
http://forum.xda-developers.com/showthread.php?p=9300252#post9300252
Hi flashed this rom using GT-P1000-CSC-SERJJ2 and Moded_P1000XXJID but the language was russian i think even though english language is selected. Which phone and CSC do I use?thanks
Hi I am attempting to return my SGH-i927 to stock UCLJ3 downloaded from www.sammobile.com
Phone looks like this
+--------------------------------------------------+
| |
| ODIN3 download Mode |
| (Protocol v2.1) |
+--------------------------------------------------+
Reason: Force Key
Secure Mode: Secure
Check signature: Check
Custom Binary Download: Yes (2 counts)
Current Binary: Samsung Official
Waiting USB Cable...
==> Connected Press the [Start] of Odin3!!
Andy Pic
Downloading...
Do not turn off target!!
{Blue Progress Bar to about 50%}
Connected via Odin and it fails flashing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your help and guidance on how I go about recovering my phone and install the stock firmware would be gratefully received
Kind Regards
UPDATE - I Successfully recovered my Phone to a working state by using TWRP and restoring a backup.
I would still like to revert the phone to UCLJ3 stock from
CyanogenMod Version 11-20140725-UNOFFICIAL-i927
Here is a stock version you can download:
requiem_mortis said:
Hi I am attempting to return my SGH-i927 to stock UCLJ3 downloaded from
UPDATE - I Successfully recovered my Phone to a working state by using TWRP and restoring a backup.
I would still like to revert the phone to UCLJ3 stock from
CyanogenMod Version 11-20140725-UNOFFICIAL-i927
Click to expand...
Click to collapse
Have you tried the Development form? This thread has a stock version you can download also, as well as the rooted, deodexed, zipaligned version:
[ROM] Stock UCLJ3 Rooted, Deodexed, Zipaligned( 2 Versions)
(Sorry, I am too new to post links, so you will just have to go to the development form, page 1, about half way down, above is the name of the thread.)
Thank you for taking the time to reply. Iam aware of the links in the Dev thread, but wanted to return the phone to an unrooted stock firmware so that Barclay's banking apps work and there are no VoIP issues for things like Skype and what's app. I want to pass the phone on to my son.
http://forum.xda-developers.com/showthread.php?t=1994902
The first link is for the pure stock UCLJ3 Rom. The Dev-Host website will redirect you to an advertisement if you are not a member when you click download. So if you go to the site, become a free member, and download the file. I downloaded it just now to ensure that it still works.
Be sure to slap dman3285 's thanks button!
Thank you once again
The Link to which your refer describes the firmware as....
"Here is the Stock UCLJ3 Firmware for ICS
It is:
Rooted
Deodexed
Zipaligned
Batch Optimized
NOT debloated"
Using 'rooted' firmware does not allow the use of Barclays banking app's.
Kind Regards
Phill Beckman
Give sediROM a try!
While installing sediROM you can decide if you want to have it rooted or not!!
Would be nice to know if that fixes your problem.
-----
Sent from my SGH-I927 using XDA Android mobile app
xdajog said:
Give sediROM a try!
While installing sediROM you can decide if you want to have it rooted or not!!
Would be nice to know if that fixes your problem.
-----
Sent from my SGH-I927 using XDA Android mobile app
Click to expand...
Click to collapse
Thankyou for your response.
I installed sediROM - using TWRP without issue - (chose un-rooted option) - Skype and WhatsApp voice call work correctly and my son is busy customising his 'new' phone -
I note that Bluetooth file transfer does not work but this appears to be a known issue - I'm trusting that the headset profiles work as this was a stated aim for this ROM fork, and his pending birthday present is to be a set of Bluetooth headphones.
requiem_mortis said:
Thankyou for your response.
I installed sediROM - using TWRP without issue - (chose un-rooted option) - Skype and WhatsApp voice call work correctly and my son is busy customising his 'new' phone -
I note that Bluetooth file transfer does not work but this appears to be a known issue - I'm trusting that the headset profiles work as this was a stated aim for this ROM fork, and his pending birthday present is to be a set of Bluetooth headphones.
Click to expand...
Click to collapse
really glad to hear that. Do not hesitate to click thanks here and in the sediROM posts
That keeps me motivated
yes bluetooth file transfer is an issue but I thought it is for the latest beta only (v2.0)? You use v1.7 right?
You're totally right the reason for sediROM was to be able to use bluetooth headset profiles
plus fixing a bug in ICS which removes all existing bluetooth pairings after a reboot. Both (and many more) fine in sediROM
All the best
xdajog
Yes using 1.7 able to pair with my oneplus one but BT transfers fail.
requiem_mortis said:
Yes using 1.7 able to pair with my oneplus one but BT transfers fail.
Click to expand...
Click to collapse
Thanks for your reply! That helps me finding the root cause.
all the best
xdajog
.
xdajog said:
Thanks for your reply! That helps me finding the root cause.
all the best
xdajog
.
Click to expand...
Click to collapse
Tried again was able to transfer files via BT from cap to oneplus but not the other way round. Just got a file not sent on the oneplus and nothing on the cap
requiem_mortis said:
Tried again was able to transfer files via BT from cap to oneplus but not the other way round. Just got a file not sent on the oneplus and nothing on the cap
Click to expand...
Click to collapse
Thanks dude. I already find the cause for that problem and a first fix was successful. I will implement the fix in the ROM build and if all went well I can release v2 finally.
Sent from my SGH-I927 using XDA Free mobile app
Hello to everyone! I would like to mention that I can't return to roger's stock as well (2.3.5). I have cm11 and I try to flash via odin3 v3.04 the I927RUXKJ5_I927RUXKJ5_I927RRWCKJ5_HOME.tar.md5. Odin process seems to be successfull, but when the phone reboots, is freezes at roger's welcome screen . I 've tried different stock roms and ways but nothing.. I try to flash these roms via TWRP (not odin) but nothing again . When I flash any custom rom there is no problem at all. It seems strange to me that everyone can gurrantee a successfull custom rom upgrade and if someone wants to downgrade to original rom, there are a lot issues. Please, I would like to install my original rogers 2.3.5 rom. If someone could give me a successfull tutorial, i would appreciate that. Thanks in advance.
Hello guys,
well this is my first thread. Actually I tried installing the BP app on my Galaxy watch active 2 following every instruction from this thread.
I was able to connect to my using the Tizen Studio.
But while installing bp.tpk using the command line, I got this particular error.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can anyone please help me with the same. I'm from India if in any case that is required.
EDIT: Not able to upload the image. For reference I got the error saying "error message: :sideloading error".
abhsatvat said:
Hello guys,
well this is my first thread. Actually I tried installing the BP app on my Galaxy watch active 2 following every instruction from this thread.
I was able to connect to my using the Tizen Studio.
But while installing bp.tpk using the command line, I got this particular error.
Can anyone please help me with the same. I'm from India if in any case that is required.
EDIT: Not able to upload the image. For reference I got the error saying "error message: :sideloading error".
Click to expand...
Click to collapse
Refer the video link it will help u .....but remember dont miss any step..
amitdon said:
Refer the video link it will help u .....but remember dont miss any step..
Click to expand...
Click to collapse
What do you understand by when I say, I tried every instruction but still got the sideload error.
Please don't comment unless you actually know the solution.
Thanks
@abhsatvat
Please with sugar on the top...
Yes you are new here... Welcome.
But you are really REALLY sure you really tried all and understand all inside this Video?
Maybe lets start from Scratch.
A
Your Model Name...
Example:
Code:
SM-R820
B
Your Firmware Version...
Type for instance this Code:
Code:
*#1234#
Write all you see here...
Best Regards
adfree said:
@abhsatvat
Please with sugar on the top...
Yes you are new here... Welcome.
But you are really REALLY sure you really tried all and understand all inside this Video?
Maybe lets start from Scratch.
A
Your Model Name...
Example:
Code:
SM-R820
B
Your Firmware Version...
Type for instance this Code:
Code:
*#1234#
Write all you see here...
Best Regards
Click to expand...
Click to collapse
Hi adfree,
BIG FAN.
MODEL NUMBER: SM-R820
Firmware Version: R820XXUIBTC7
And yes i tried every step mentioned in the thread as well as the video. While I tried doing with the same with the listed sdb, tpk, and apk also the latest Tizen studio. It asked me update it. So later in the same thread, "index of sdb files" that were mentioned. I downloaded the latest version dated April 6(sdb_4.2.12_windows-64).
Now I tried with the updated version, it did execute but it gave the "sideload error".
So i think this sums up that I have followed every step on my watch. following are the same.
1. Turn the "debugging" on.
2. Select WiFi as "always on" and connected to the same WiFi network as of the Laptop.
3. Noted down the IP address.
4. Open Tizen and remote connect to the watch. (check the RSA key prompt on watch)
5. Unzip the downloaded folders and move the bp.tpk to tools "sub-folder" for sdb.
6. Now run the "aniscon".
7. In command line, type "sdb install bp.tpk".
These were the steps I followed. Kindly help me if I have missed any step.
R820XXUIBTC7
Click to expand...
Click to collapse
Tiny correction.
Code:
R820XXU1BTC7
IMHO the only known CSC / Salescode... is INU... India.
https://doc.samsungmobile.com/SM-R820/INU/doc.html
Maybe somebody from India could please confirm... BTC7 is working for this procedure...
Feel free also try the new "public" released TPK for BP... here:
https://forum.xda-developers.com/showpost.php?p=82859231&postcount=719
It is inside system.7z
Please try and confirm if still Sideload Error...
Best Regards
Is it possible to install this app on SM-R805F?
renton82 said:
Is it possible to install this app on SM-R805F?
Click to expand...
Click to collapse
Hi @renton82
Many have tried sideloading and it succeeds but while you try to calibrate it, it is stuck at 0%.
So I don't think SM-R805F supports BP measurement.
Regards
adfree said:
Tiny correction.
Code:
R820XXU1BTC7
IMHO the only known CSC / Salescode... is INU... India.
https://doc.samsungmobile.com/SM-R820/INU/doc.html
Maybe somebody from India could please confirm... BTC7 is working for this procedure...
Feel free also try the new "public" released TPK for BP... here:
https://forum.xda-developers.com/showpost.php?p=82859231&postcount=719
It is inside system.7z
Please try and confirm if still Sideload Error...
Best Regards
Click to expand...
Click to collapse
Hi @adfree
I got it working. tried with the old sdb and voila, it worked.
Thanks for the support man. Cheers
Regards.
Always use OLD SDB, with the new one you have Sideload error.
Cheers
Erden said:
Always use OLD SDB, with the new one you have Sideload error.
Cheers
Click to expand...
Click to collapse
Hi @Erden
Yes I got it now. I was getting that error. Anyway thanks.
Regards.
From Tizen studio, I am unable to find my watch from scan. even entering the IP. how do i check the port no.?
sorry newbie here
stanleyj said:
From Tizen studio, I am unable to find my watch from scan. even entering the IP. how do i check the port no.?
sorry newbie here
Click to expand...
Click to collapse
Hello @stanleyj
No problem buddy, I'm a newbie too. Lemme help with that but before that can you please tell your watch's model number?
You can find that under Settings >> About.
Oh ok thanks a lot
SB-R820
stanleyj said:
Oh ok thanks a lot
SB-R820
Click to expand...
Click to collapse
Ok great, go to Tizen's Package Manager and follow the steps:
1. Under Main SDK tab, install the 5.5 wearable package.
2. Go to the Extension tab, install Samsung wearable extension.
Let it complete and then try the way you were trying earlier to scan for the device using remote device manager from the drop-down. Hopefully you will get it working this time.
Once it shows up, enable the Connect toggle.
Then run the "aniscon" command line and type "sdb install bp.tpk". (make sure you are using the old sdb only)
For better assistance, follow this video.
I hope it will work.
Brilliant thanks!! I will try that!! Much appreciated!!
abhsatvat said:
Ok great, go to Tizen's Package Manager and follow the steps:
1. Under Main SDK tab, install the 5.5 wearable package.
2. Go to the Extension tab, install Samsung wearable extension.
Let it complete and then try the way you were trying earlier to scan for the device using remote device manager from the drop-down. Hopefully you will get it working this time.
Once it shows up, enable the Connect toggle.
Then run the "aniscon" command line and type "sdb install bp.tpk". (make sure you are using the old sdb only)
For better assistance, follow this video.
I hope it will work.
Click to expand...
Click to collapse
Do i need a samsung phone for this as well or can i do this with any android phone? (Mate 20 Pro atm)
TeeKay35 said:
Do i need a samsung phone for this as well or can i do this with any android phone? (Mate 20 Pro atm)
Click to expand...
Click to collapse
Hi @TeeKay35
As per i know, using a Samsung smartphone will hardly make any difference, just download the apk on your phone and install it, later connect it with your watch. I think it should run as usual.
Please right back if any problem occurs.
Anyone be able to help me? I installed BP to my fathers active watch 2 and S20 with no problems. He was using it god awhile then accedently deleted it. Now try to re install same as the guide and it won’t install to the watch anymore. Can anyone help me please
grk747 said:
Anyone be able to help me? I installed BP to my fathers active watch 2 and S20 with no problems. He was using it god awhile then accedently deleted it. Now try to re install same as the guide and it won’t install to the watch anymore. Can anyone help me please
Click to expand...
Click to collapse
Are you sure you followed all the steps correctly?
Also, can you tell me are you based in USA, right now?
Code:
USE AT OWN RISK
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
* this was only tested on g930f and i don't guarantee that it will work on your model!
How to install
1. Download all 2 zips
You should have this 2 zips
- S7 Nogaut Deodexed/Debloated/Deknoxed.zip
- no-verify-opt-encrypt.zip
2. Format system,data,dalvik cache,cache
3. Flash ROM
4. After rom installation untick Reboot and click net
5. Flash no-verify-opt-encrypt (from twrp)
6. (optional) Flash Magisk (not included)
7. Reboot
WORKING:
Wi-fi
Fingerprint
Mobile data
Calling
Screenshots
SMS
Known Issues:
first boot is very slow you must wait 10-20 min
stock keyboard has many bugs (in samsung, google account setup you letter that you type will replace letter that you typed before, if you want type one capital letter you can't because samsung will type instead normal letter) you can just use other keyboard like microsoft swiftkey (in next update i will replace stock keyboard)
MTP not working (you cannot copy/cut files, on trying to copy/cut you get error "device is busy")
Features
- Deodexed
- Deknoxed
- Debloated
- Aroma installer
CHECK IF YOUR MODEL IS TESTED
SM-G930F - TESTED
SM-G930AZ - NOT TESTED
SM-G930FD - NOT TESTED
SM-G930K - NOT TESTED
SM-G930L - NOT TESTED
SM-G930P - NOT TESTED
SM-G930R4 - NOT TESTED
SM-G930R6 - NOT TESTED
SM-G930R7 - NOT TESTED
SM-G930S - NOT TESTED
Code:
Note: if you have not tested model and rom is working for you and has no bugs please let me know
Rom Info
android version: 7.0(nougat)
CSC: XEO
Build number: NRD90M.G930FXXS2DRAA
Kernel Source: https://github.com/djb77/samsung-kernel/tree/G93XX-TW7
Credits:
@Zordon.xyz - For creating rom and testing G930F Model
SCREENSHOTS
Spoiler: Screen Shots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@Zordon.xyz Please check your PM inbox. Thank you.
Badger50 said:
@Zordon.xyz Please check your PM inbox. Thank you.
Click to expand...
Click to collapse
i was searching for kernel source now i'm adding it. thx for giving info
Zordon.xyz said:
i was searching for kernel source now i'm adding it. thx for giving info
Click to expand...
Click to collapse
done
Zordon.xyz said:
done
Click to expand...
Click to collapse
Very good, and thank you.
First of all, I would like to say, very nice work! I have been looking for this possibility for a really long time.
My S7 has the latest binary version 8. When I look at the screenshots, I also see a version 8.
I have two questions about this:
Is it possible to keep my own CSC or is it only possible to use XEO?
Do I flash everything via TWRP or do I also need Odin?
delta0700 said:
First of all, I would like to say, very nice work! I have been looking for this possibility for a really long time.
My S7 has the latest binary version 8. When I look at the screenshots, I also see a version 8.
I have two questions about this:
Is it possible to keep my own CSC or is it only possible to use XEO?
Do I flash everything via TWRP or do I also need Odin?
Click to expand...
Click to collapse
thanks. idk maybe there is way to change csc, if you want i can make special build for your CSC. if you have twrp you don't need odin
Zordon.xyz said:
thanks. idk maybe there is way to change csc, if you want i can make special build for your CSC. if you have twrp you don't need odin
Click to expand...
Click to collapse
Thanks for your quick reply. That would be very nice of you, if you could make it suitable for me with the CSC DBT. You do not believe how much you do me a favor with this.
delta0700 said:
Thanks for your quick reply. That would be very nice of you, if you could make it suitable for me with the CSC DBT. You do not believe how much you do me a favor with this.
Click to expand...
Click to collapse
You have g930f?
Zordon.xyz said:
You have g930f?
Click to expand...
Click to collapse
Yes. For safety here is the phone info:
i builded rom with DBT csc but it's not booting :c
Zordon.xyz said:
i builded rom with DBT csc but it's not booting :c
Click to expand...
Click to collapse
Maybe it will work on my S7. I could give it a try. Otherwise, I would try your version and attempt to flash the CSC with Odin afterwards. Or do you think that's not a good idea?
delta0700 said:
Maybe it will work on my S7. I could give it a try. Otherwise, I would try your version and attempt to flash the CSC with Odin afterwards. Or do you think that's not a good idea?
Click to expand...
Click to collapse
hmm. i don't know but you can try...
anyways here is the link for download: https://androidfilehost.com/?fid=14655340768118480530
and thanks for likes on my posts
Zordon.xyz said:
hmm. i don't know but you can try...
anyways here is the link for download: https://androidfilehost.com/?fid=14655340768118480530
and thanks for likes on my posts
Click to expand...
Click to collapse
So I tried the DBT version. It sadly didn't boot like you said it would. Now I have flashed your version. Still it boots, I think with the Samsung logo I have to wait just 10-20 minutes as you mentioned. After that I'll see if it worked for me. But thanks never less!
Unfortunately, that doesn't seem to work either. It is still at the Samsung logo. Too bad. Nevertheless, thank you. I just don't understand Samsung, why they forbid you to make a downgrade....
try format data
I always format data as well, since I don't like to flash dirty.
delta0700 said:
I always format data as well, since I don't like to flash dirty.
Click to expand...
Click to collapse
i don't have any idea to how fix this
No problem. Thanks for your time aniway.
Couldn't downgrade. Followed instructions and did it twice. First time Samsung logo with S G930 appeared and the LED was off, then repeated the steps and only SAMSUNG + LED on, but no result, stuck at it