hello guys, starting this trhead for a list of diagnostic codes. Samsung Omnia for 7 .. come forward and help all.
Enter always in diagnosis mode with: ##634# and hit the call button.
And now Try this code:
1) *#0*# for the LCD test
2) *#2*# for Debug Mode
3) *#3*# for TestBrigthnes
4) *#1234#* for Version
5) *#32489# for Test Mode - CIPHERING CONTROL
6) *#2263# for Test Mode - BAND PREFERENCE
7) *#0782# for RTC Time
8) *#0673# for MP3 Test
9) *#9090# for Test Mode - DIAG CONFIG
10) *#0842# for Vibrator Test
11) *#2580# for INTEGRITY CONTROL
12) *#0011# for Test Mode - WCDMA
13) *#7465625# for Personalize - Lock Status - Network Lock - Subset - SP Lock - Cp Lock
14) *#232337# for BT Mac Address
15) *#0002*28346# for INCREASE VOLUME !!!!!! - Sound Tuning: But i dont know use it - help me please
16) *#7284# for Micro USB Test (Zune Sync, Modem Tethered Call, Modem USB Diag)
17) *#1472365# for Location Service
18) *#05# for Simple Test
19) *#2470# for CameraFWUpdate
You can add :
Micro USB Test *#7284# (Zune Sync, Modem Tethered Call, Modem USB Diag)
Location Service *#1472365#
Simple Test *#05#
CameraFWUpdate *#2470#
PDAphoneAddict.com
Erwan960 said:
You can add :
Micro USB Test *#7284# (Zune Sync, Modem Tethered Call, Modem USB Diag)
Location Service *#1472365#
Simple Test *#05#
CameraFWUpdate *#2470#
PDAphoneAddict.com
Click to expand...
Click to collapse
Ok Many Tanks!!!
thank's but Not for Mozart maybe later ...
How do I input the codes once at the diagosntic screen?
What's with the beeping on the RTC Time screen?
The location service is actually pretty useful! It shows altitude and speed, as well as GPS co-ordinates.
more than 60 diagnosis codes
I've written 2 posts on my blog listing more than 60 diagnosis codes (tested on my Samsung Omnia 7), and how to use them:
post 1 : martani[dot]net/2010/12/windows-7-hacks-all-diagnosis-codes-you.html
post 2 : martani[dot]/2010/12/windows-7-hacks-all-diagnosis-codes-you_26.html (sorry can't post links yet!)
Enjoy
Related
I'm coming from the Samsung Captivate, and on those ROMs I could choose which baseband I wanted to use based on performance. I used to access that by entering #*#*2263*#*#
Is there any way to do something similar on the GS3?
Regards
Smith
*#2263# RF Band Selection - is where your answer lies I believe Also here is the list as per and thanks to anil84
SAMSUNG GALAXY S3 CODES SECRETS
*#06# Show IMEI number
*#0*# LCD Test Menu
*#*#4636#*#* user statistics and Phone Info
*#0011# Displays status information for the GSM
*#1234# View SW Version PDA, CSC, MODEM
*#12580*369# SW & HW Info
*#197328640# Service Mode
*#0228# ADC Reading
*#32489# (Ciphering Info)
*#232337# Bluetooth Address
*#232331# Bluetooth Test Mode
*#232338# WLAN MAC Address
*#232339# WLAN Test Mode
*#0842# Vibra Motor Test Mode
*#0782# Real Time Clock Test
*#0673# Audio Test Mode
*#0*# General Test Mode
*#2263# RF Band Selection
*#9090# Diagnostic ConfiguratioN
*#7284# USB I2C Mode Control
*#872564# USB Logging Control
*#4238378# GCF Configuration
*#0283# Audio Loopback Control
*#1575# GPS Control Menu
*#3214789650# LBS Test Mode
*#745# RIL Dump Menu
*#746# Debug Dump Menu
*#9900# System Dump Mode
*#44336# Sofware Version Info
*#7780# Factory Reset
*2767*3855# Full Factory Reset
*#0289# Melody Test Mode
*#2663# TSP / TSK firmware update
*#03# NAND Flash S/N
*#0589# Light Sensor Test Mode
*#0588# Proximity Sensor Test Mode
*#273283*255*3282*# Data Create Menu
*#273283*255*663282*# Data Create SD Card
*#3282*727336*# Data Usage Status
*#7594# Remap Shutdown to End Call TSK
*#34971539# Camera Firmware Update
*#526# WLAN Engineering Mode
*#528# WLAN Engineering Mode
*#7412365# Camera Firmware Menu
*#07# Test History
*#3214789# GCF Mode Status
*#272886# Auto Answer Selection
*#8736364# OTA Update Menu
*#301279# HSDPA/HSUPA Control Menu
*#7353# Quick Test Menu
*2767*4387264636# Sellout SMS / PCODE view
*#7465625# View Phone Lock Status
*7465625*638*# Configure Network Lock MCC/MNC
#7465625*638*# Insert Network Lock Keycode
*7465625*782*# Configure Network Lock NSP
#7465625*782*# Insert Partitial Network Lock Keycode
*7465625*77*# Insert Network Lock Keycode SP
#7465625*77*# Insert Operator Lock Keycode
*7465625*27*# Insert Network Lock Keycode NSP/CP
#7465625*27*# Insert Content Provider Keycode
*#272*IMEI# then we will get buyer code (For samsung galaxy sIII csc code)
*#*#7780#*#* Factory data reset - Clears Google-account data, system and program settings and installed programs. system will not be deleted, and OEM programs, as well as My Documents (pictures, music, videos)
Bah, wrong thread...ignore
T999 - pertinent replies are appreciated.
Dialed *#197328640# > UMTS > COMMON > DIAG CONFIG >
Code:
DIAG CONFIG
[1] USB ( )
[2] UART (*)
[3] DBG MSG ON (*)
[4] DBG MSG OFF ( )
Select the 1st option to switch it to USB and it comes back with:
Code:
USB_Diag Selected
Change Complete.
If You change Uart or USB diag
Please reboot the mobile.
Then, use Settings Key and select "Back" the USB is NOT selected.
Any ideas on how to get it switch to USB?
Tried the diag scripts but they don't enable it either. +those scripts are only for users not on TW (right?).
I've searched quite a bit for a while now with no luck. Need answer(s) specific to this phone as most solutions etc. including some of the USSD codes (eg. *#9090#) that work on other SGSIII don't necessarily work on T999.
The phone is still sim/network locked. Stock ICS 4.0.4 UVLH4 / Insecure Kernel / Rooted and busybox installed.
c'mon, someone's gotta have an answer to this...
I'm on the same boat now. I cant get it to switch to USB.
anyone ever figure this out???
Can you give a little more background ? What is the original problem that led you to try this solution ? Also what happens when you connect to a PC ? Does the MTP come on ?
After that second message about reboot, don't use back button do reboot.
try: menu >> key input >> 1
*#7284# ............ *#0808#
:fingers-crossed:
From http://mobilecon.info/htc-secret-code.html
Please Use the code wisely, some code have an effect that cannot to restored
HTC secret Code
Tested/Working Code:
##775# – EPST/PRL – PRL Settings
##786# – EPST – Status Menu
##3282# – EPST – Data Programming Menu (User Name, Advanced, Restore, Enable HFA, DSA Server, MMSC URL)
##2539# – EPST/A-Key – Data A key menu
##7738# – EPST/P_Rev – Protocol Revision
##8626337# – EPST/Vocoder – Unsure
##33284# – Debug – Debug Menu – (Debug Screen, Test Calls, RC Data, HDR/1X Selection, Voice Privacy, DTMF Set, Korea Mode Set)
##3424# – Diagnostic – Connect to phone in diag mode
##4772579# – Reset the GPS
##72786# – changes DSA back to Factory
##889# – enables TTY
*#*#34971539#*#* – update firmwire
*#*#7594#*#* – change the End Call / Power button action
*#*#273283*255*663282*#*#* – code opens a File copy screen where you can backup your media files
*#*#197328640#*#* – enter into Service mode
*#*#232339#*#* – WLAN test (Use “Menu” button to start various tests)
*#*#526#*#* – WLAN test (Use “Menu” button to start various tests)
*#*#528#*#* – WLAN test (Use “Menu” button to start various tests)
*#*#7780#*#* – Factory reset
*2767*3855# – Factory Format
*#*#232338#*#* – Shows WiFi MAC address
*#*#1472365#*#* – GPS test
*#*#1575#*#* – Another GPS test
*#*#232331#*#* – Bluetooth test
*#*#232337#*# – Shows Bluetooth device address
*#*#8255#*#* – launch GTalk Service Monitor.
*#*#4986*2650468#*#* – PDA, Phone, H/W, RFCallDate
*#*#1234#*#* – PDA and Phone
*#*#1111#*#* – FTA SW Version
*#*#2222#*#* – FTA HW Version
*#*#44336#*#* – PDA, Phone, CSC, Build Time, Changelist number
*#*#0283#*#* – Packet Loopback
*#*#0*#*#* – LCD test
*#*#0673#*#* OR *#*#0289#*#* – Melody test
*#*#0842#*#* – Device test (Vibration test and BackLight test)
*#*#2663#*#* – Touch screen version
*#*#2664#*#* – Touch screen test
*#*#0588#*#* – Proximity sensor test
*#*#3264#*#* – RAM version
—– Was only able to get the following working on CM6 Rom —–
*#*#4636#*#* – Phone Information – “Phone information, Battery information, Battery history, Useage statistics, Wifi information” (froyo only)
Confirmed not Working:
##UPST# – modem directory
##778# – EPST – Advanced Programming
Unverified code:
##37872# – Full Speed USB Mode – Enable/Disable
##3386# – DDTM – Enable/Disable
*#0011# Service menu
*#0228# Battery Status
*#2454# Low Battery Power Off
*#0283# Receiver Packet loopback
*#0782# RTCTimeRead displays time (and seconds)
*#147852# Allows you to access many screens including CDMA DATA Connections
*#369852# Allows you to access many screens including CDMA DATA Connections
*#1472365# GPS Setup
*#232331# Bluetooth RF Test Mode
*#1575# Service menu
*#197328640# Service menu
*#2767*2878# Service menu
*#32489# Service menu
*#4238378# Service menu
*#6984125*# Service menu
*#7284# Service menu
*#9090# Service menu
*#2580# Service menu
*#2664# Touchscreen Firmware Version
*#2664# Main Firmware Update
*#3264# RAM Version
*#3282*727336*# Current Data State
*#745# Sec_RIL_Dump allows you to copy to phone memory, clear ril log, (greyed out copy to SDcard and view RIL log), exit
*#7450# Phone Dump Mode Disable
*#7451# Phone Dump Mode Enable
*#7780# Factory Reset
*#9900# SysDump copy logcat/dumpstate/dumpsys, enable debug log, copy watchdogdumpstatelog)
*#0*# – Test Utility – SAFE TO PLAY WITH
*#0289# Melody Test again?
*#0673# Melody Test SAFE TO PLAY WITH
*#0842# Vibration test SAFE TO PLAY WITH
*#2263# ??
*#2663# Touchscreen Accuracy Test SAFE TO PLAY WITH
*#767*3855# Factory Format – CRAP!! WARNING!!!
Use the code wisely, some code have an effect that cannot to restore
- See more at: http://mobilecon.info/htc-secret-code.html#sthash.SQkVC8dW.dpuf
Does anyone know how to get to the network control via the service menu on the ATT note 4?
I know *#197328640#. will open the Debug Screen, Im not sure how to get to the Phone Control, then Network
Lock and then the options menu.
Is it not a option at all?
Network Secret codes for Samsung galaxy- SOME WORK FOR THE NOTE 4 SOME DONT
*7465625*638*# This code gives you the ability to customize Network Lock MCC/MNC
#7465625*638*# Use this code to perform Network data locks and (Insert Network Lock)
*7465625*782*# Customize your Network Lock NSP
#7465625*782*# input any semi- Partiality Network Lock Keycode
*7465625*77*# Key code for Network lock SP
#7465625*77*# Secret key to insert network operator
*7465625*27*# Secret code for Network lock and operation for NSP/CP
#7465625*27*# Secret code for Samsung galaxy Content Provider network insertion
*#272*IMEI# Samsung galaxy s3 csc code -gives your the buyer code
*#2263# RF Band -select your network mode type
eyesofice said:
Does anyone know how to get to the network control via the service menu on the ATT note 4?
I know *#197328640#. will open the Debug Screen, Im not sure how to get to the Phone Control, then Network
Lock and then the options menu.
Is it not a option at all?
Click to expand...
Click to collapse
This is what ive seen online:
On the dialpad on your phone, type in *#197328640#.
Then select [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3] Perso SHA256 OFF.
Wait for 30 seconds or so before returning to your main menu by choosing back.
In the main menu, you should see a “Network Lock” message, now choose [4] NW Lock NV Data INITIALLIZ.
none of this is a option:
Then select [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3] Perso SHA256 OFF.
Wait for 30 seconds or so before returning to your main menu by choosing back.
In the main menu, you should see a “Network Lock” message, now choose [4] NW Lock NV Data INITIALLIZ.
Any suggestions?
Ive found: IM TRYING TO UPDATE THIS ASAP, IM CURRENTLY AT WORK AND NOT SUPPOSE TO HAVE MY PHONE OUT SO IM TRYING TO GO MENU BY MENU
A found the way to enable ServiceMneu on Galaxy Note 4
*#0011#
Menu>Back
Menu>Input>Q
Menu>Input>0000 wait some seconds and Hello service menu )
Then you get a screen that says:
1 Protocol State
2 UE SETTING AND INFO
3 ECT
4DEBUG SCREEN(OPEN)
5 HW TEST
WHEN ACCESSING THE DEBUG SCREEN YOU GETS
1 BASIC INFO
2 NAS INFO
3 AS INFO
4 SIM INFO
5 CDMA DEBUG INFO
when you clock on CDMA DEBUG INFO it takes you to a Debug Menu and cant click on it... not sure if there is a letter or a number that needs to be put in there to access that menu further
When you select SIM INFO
You get 2 options
1 GENERAL INFO
2 QMI UIM STATUS
When you select NAS INFO you get 6 options
1 MM INFO
2 GPRS INFO
3 REJECT INFO
4 BACKOFF FPLMN
5 SMC RESULT INFO
6 CALL END CAUSE
When you click on UE Settings:
UE SETTING
UE PROTOCALL MENU
1 AS
2 NAS
3 CDMA
4 GCF
5 SIM
6 GPS
7 IMS
8 TDSCDS
When you select 1 AS you get the following options:
AS CONFIG
1 FREQUENCY LOCK
2 RELEASE VERSION
3 DSDS INACTIVITY TMR
4 DRX CONTROL
5 SECURITY CONTROL
6 AMR CONTROL
7 LTE FGI FILE CONTROL
8 ACQ DB DELETE
9 NULL INTEGRITY MENU
When you select 5 Sim you get:
SELCET SIM
1 SIM CLASS CONTROL
2 UIM RESET CONTROL
3 IMSI REPLACEMENT CONTROL
4 SIM FPLMN CONTROL
5 EF_RAT CONTROL
When you select Protocal State
1 BASIC INFO
2 AS INFO
3 ECT ( PRESS ON THAT AND IT SAYS MENU DOES NOT EXIST- WONDER IF ITS A HIDDEN MENU THAT NEEDS A KEY SEQUENCE TO GET TO THE NETWORK LOCK
4 NAS INFO
5 SIM INFO
6 PROTOCOL SIMULATION
Others that I have found but not tested:
Samsung Galaxy Secret Code
*#06# (Display IMEI number)
*#1234# (Display current firmware)
*#*#4636#*#* (Diagnostic and general settings mode)
*#*#7780#*#* (Factory soft reset)
or *#7780#
*2767*3855# (Factory hard reset to ROM firmware default settings)
*2767*4387264636# (To display product code)
*#272*imei#* (Display/change CSC code)
or *#272*HHMM#*
*#*#1472365#*#* (GPS test settings)
*#*#197328640#*#* (Service mode main menu)
*#12580*369# (SW & HW Info)
*#232337# (Bluetooth Address)
*#232331# (Bluetooth Test Mode)
*#232338# (WLAN MAC Address)
*#0228# (ADC Reading)
*#32489# (Ciphering Info)
*#2263# (RF Band Selection)
*#9090# (Diagnostic ConfiguratioN)
*#7284# (USB I2C Mode Control)
*#232339# (WLAN Test Mode)
*#0842# (Vibra Motor Test Mode)
*#0782# (Real Time Clock Test)
*#0673# (Audio Test Mode)
*#0*# (General Test Mode)
*#872564# (USB Logging Control)
*#4238378# (GCF Configuration)
*#0283# (Audio Loopback Control)
*#1575# (GPS Control Menu)
*#3214789650# (LBS Test Mode)
*#745# (RIL Dump Menu)
*#03# (NAND Flash S/N)
*#0589# (Light Sensor Test Mode)
*#0588# (Proximity Sensor Test Mode)
*#273283*255*3282*# (Data Create Menu)
*#34971539# (Camera Firmware Update)
*#526# (WLAN Engineering Mode)
*#746# (Debug Dump Menu)
*#9900# (System Dump Mode)
*#44336# (Sofware Version Info)
*#273283*255*663282*# (Data Create SD Card)
*#3282*727336*# (Data Usage Status)
*#7594# (Remap Shutdown to End Call TSK)
*#0289# (Melody Test Mode)
*#2663# (TSP / TSK firmware update)
*#528# (WLAN Engineering Mode)
*#7412365# (Camera Firmware Menu)
or *#*#34971539#*#*
*#80# (Unknown)
*#07# (Test History)
*#3214789# (GCF Mode Status)
*#272886# (Auto Answer Selection)
*#8736364# (OTA Update Menu)
*#301279# (HSDPA/HSUPA Control Menu)
*#7353# (Quick Test Menu)
*2767*4387264636# (Sellout SMS / PCODE view)
*#7465625# (View Phone Lock Status)
*7465625*782*# (Configure Network Lock NSP)
*7465625*27*# (Insert Network Lock Keycode NSP/CP)
#7465625*27*# (Insert Content Provider Keycode)
#7465625*782*# (Insert Partitial Network Lock Keycode)
*7465625*77*# (Insert Network Lock Keycode SP)
#7465625*77*# (Insert Operator Lock Keycode)
*7465625*638*# (Configure Network Lock MCC/MNC)
#7465625*638*# (Insert Network Lock Keycode)
A found the way to enable ServiceMneu on Galaxy Note 4
*#0011# type this code "Q" than 0000 type don't see the service mode network band change
please help me how to do it this note 4 function .........
Use at your own risk:
1) *#800# - Enter Engineering
mode
2) *#801# - Enter switch test
mode
3) *#802# - Enter
automatically engineering
TTFF GPS test mode
4) *#803# - Enter Engineering
networks test mode
5) *#804# - automatic
disconnect test mode
6) *#805# - engineering
Bluetooth test mode
7) *#806# - engineering
aging test mode
8) *#807# - Enter Engineering
test mode
9) *#808# - Enter manual
engineering test mode
10) *#809# - Enter
Engineering echo test
mode
11) *#888# - view hardware
Pcb versions
12) *#900# - test
photographs RBG
13) *#99# - screen light long
bright
14) *#6776# - machine info
15) *#1234# - view software
details
16) *#36446337# - test
function introduction
17) *#06# - check IMEI
number
Knowledge is very meaningful, thank you for sharing