EZ-DZ GODSPEED OVERCLOCKING kernel Update ver 03 for the HTC Desire Z
WHAT'S THIS ??
- This is a flashable Update.zip containing the stock HTC Desire Z with HTC Sense Kernel 2.6.32.21-gd2764ed.
- NOTICE this is kernel-specific. This overclocking update won't work if you have a different kernel (T-Mobile firmware, some asian versions, etc). This is intended for the current stock european generic Desire Z, the Bell-NAM Desire Z, and any custom ROM based on this Kernel version.
- It will overclock your phone's CPU to 1017 MHz, 1206 MHz or 1420 MHz Godspeed.
- The stock Kernel has not been modified. Instead of that, the Overclocking module is automatically loaded on boot.
- It also includes embedded root priviledges, disabled security, the latest Busybox (Nov 2010) and Superuser, so your root will stay even if you ever have to factory reset.
- Flashing one of this Kernel Update zips will NOT erase your personal info and configurations; it will not wipe your phone because only the kernel will be updated.
HOW TO FLASH ??
- I assume you are an experienced user, if not, please refer to the "EASY rooting/flashing TUTORIAL and FAQs for dummies" thread, read the FAQ, and them come back.
TIP: Hey, please remember: it's always clever to make a NANDroid backup before flashing anything.
- I have prepared 3 sets: a conservative 1 GHz overclocking update, an intermediate 1.2 GHz option and a more aggressive 1.4 GHz version. Pick your Downlaod from this post's footer, and copy it to your phone's SD card.
- Flash it via ClockworkMod: Open ROM Manager, tap "Install ROM from SD card", scroll to select your EZ Godspeed update zip, tap OK. Phone will reboot with the updated kernel.
TIP: DON'T check "Wipe Data and Cache" unless you wanna delete all your personal info, installed apps and configurations.
- Enjoy your new godspeed EZ overclocked DZ
WANT TO FINE TUNE OR TRY OTHER SPEEDS ??
- I strongly recommend getting SetCPU from the Market. It will let you control your max/min CPU speeds, fine tune, and many advanced options, but be aware SetCPU can't override the max speed specified by the Godspeed kernel update you choose.
- To change the max overclocking speed, You can flash from any Godspeed update to another as many times as you wish, because the only diference between each is the overclocking module autoload script 03gtrabOC, which specifies the oc-dz.ko overclocking module max value (check post 5 if you want to learn how it works or how to make your own update zips).
HOW TO DISABLE / UNINSTALL ??
Do you really wanna go back ?? OK then, manually uninstalling is EZ-DZ too:
1.- Delete the file /system/etc/init.d/03gtrabOC and reboot. The overclocking module won't be auto-loaded anymore; you're back to 806MHz.
2.- Delete /system/lib/modules/oc-dz.ko (the overclocking module). This is optional since the module won't be loaded without the script.
Everything else in this Update zips is stock (the Kernel, radio module bcm4329.ko, etc) except for a couple of ramdisk optimizations (embedded root and enabled busybox run parts capabilities) and the latest Busybox and Superuser apps (which you already had).
OR you can simply restore your NANDroid backup and forget you ever flashed this OC thing.
ACKNOWLEDGEMENTS:
THANKS to tkirton (update script guru and patient teacher), coolbho3000 (original overclocking module for the HTC Vision), stridger (recompiled module for the Desire Z), dsixda (learned a lot by reading the scripts from his kitchen) and many others.
If I owe acknowledgements please let me know and I will update this post.
DOWNLOADS:
- For 1.4 GHz overclocking download EZDZ_Godspeed_update03.zip
MD5 checksum: b28261f48b2fe437075d64bf4cd727c5
- For 1.0 GHz overclocking download EZDZ_Godspeed1GHz_update03.zip
MD5 checksum: 7e1ac82406bcf818ed33d4e886bba99c
- For 1.2 GHz overclocking download EZDZ_Godspeed1.2_update03.zip
MD5 checksum: dfc699802cae2744b22ce32f10380df6
Good work
Awesome work!
Is there a way to set speed at 1Ghz? I am using SetCPU. Slider gives me only 245, 368, 768 and 1420MHz speed. Any ideas?
Oh! And is there easy way defuse this nice kernel? Root and S-Off I already had.
Still waiting for this f$*kin' phone in France, need it !
In setCPU, impossible to set speed at stock Mhz ? (806Mhz, correct ?)
As always, feel free to modify/edit/tweak/improve etc anything I share
How are the max frequencies/clockspeeds set ??
The overclocking script file /system/etc/init.d/03gtrabOC loads the overclocking module oc-dz.ko at boot, and sets its max speed.
The last line in the script sets the maximum overclocking value:
The only change between all versions is the final number at "pll2_l_val=x" (the MHz value multiplier is 19.2). Examples:
For stock 806.4 MHz
pll2_l_val=42
For 1017.6 MHz
pll2_l_val=53
For 1209 Mhz
pll2_l_val=63
For 1420 Mhz
pll2_l_val=74
How to delete the script 03gtrabOC to stop auto-loading the overclocking module ??
Using ADB commands from a PC:
adb remount (remounts r/w for that session if phone has unsecured kernel, like this one)
adb shell rm /system/etc/init.d/03gtrabOC
How is the overclocking module auto-loaded ??
The stock boot.img was unpacked, and inside ramdisk, bootcomplete.rc was edited to include a line which enables Busybox run parts at boot, then, with Notepad++ a line was added to the updater-script of the Update zip which gives running atributes to any script dropped into /system/etc/init.d. There's where the module-loading script 03gtrabOC was placed.
Was else was included or modified ??
- The overclocking module compiled by stridger was added to /system/lib/modules/
- Superuser APK was added to /system/app/ just in case it's missing or wrong.
- Su and the latest version of Busybox were added to /system/xbin/
- A full set of Busybox symlinks was added to the Update zip updater-script with Notepad++
- Inside the boot.img's ramdisk, defaul.prop was edited to ro.secure=0 (unsecured Kernel, "root")
- The Kernel itself was not touched, to avoid conflicts / problems (anyway the source is still not available).
How were these Update zips packed and signed ??
Using Daneshm90's Update zip tool.
How was the boot.img unpacked and repacked ??
Using scripts from dsixda's kitchen on Cygwin, a Unix emulator for Windows.
Thanks AGAIN mate. Is 1.4 GHz safe choice for everyday usage?
I'll try play with values, I just want that 1GHz too.
EDIT: And I want that 1.4 GHz value too. lol
03gtrabOC has only one value, is that some kind divider? I am sorry but I can not figure those tables out.
This works great. I assume that this now sticks between reboots?
ludow said:
03gtrabOC has only one value, is that some kind divider? I am sorry but I can not figure those tables out.
Click to expand...
Click to collapse
Updated post 1 (new 1GHz version) and post 5 (how to manually change overclocking speed / multiplier value)
sonofabit said:
This works great. I assume that this now sticks between reboots?
Click to expand...
Click to collapse
Yes it should
gtrab, quick question. As this update has root built in do i have to root my device first or can i simply install clockwork and apply this update?
huetson2 said:
gtrab, quick question. As this update has root built in do i have to root my device first or can i simply install clockwork and apply this update?
Click to expand...
Click to collapse
yes of course you need root and S-OFF to flahs this or anything non-official
check the easy tutorial FAQ linked on the post, you'll become a flashing master in 8 minutes
Is 1.4GHz the fastest we can go on the Z / without a custom kernel?
Seeing as the G2 can go up to 1.9GHz.
gtrab said:
yes of course you need root and S-OFF to flahs this or anything non-official
check the easy tutorial FAQ linked on the post, you'll become a flashing master in 8 minutes
Click to expand...
Click to collapse
been a while since flashing an htc (magic), been flashing a galaxy s for the last 6 months.
Have read the tutorial now thanks and all is clear again
DanWilson said:
Is 1.4GHz the fastest we can go on the Z / without a custom kernel?
Seeing as the G2 can go up to 1.9GHz.
Click to expand...
Click to collapse
I'm on 1.4Ghz, that's enough for me, but other users dare to go up and up. Check the other overclocking threads in this forum to see what other users are reporting.
This update zip won't change the voltage, just the speed, so we will have to find out
huetson2 said:
been a while since flashing an htc (magic), been flashing a galaxy s for the last 6 months.
Have read the tutorial now thanks and all is clear again
Click to expand...
Click to collapse
you're welcome
gtrab said:
I'm on 1.4Ghz, that's enough for me, but other users dare to go up and up. Check the other overclocking threads in this forum to see what other users are reporting.
This update zip won't change the voltage, just the speed, so we will have to find out
Click to expand...
Click to collapse
Come Christmas (well, a couple days after) my Z shall be pimped. -ish.
And I'll try an overclock of epic proportions. For five minutes, or until I crap myself. Which ever is first
this works well! Tnx man! finaly a way to overclock that stays after reboot!
all nice and stable @ 1.42GHZ
Great work! Might be a good idea to add a file with stock kernel and bcm4329.ko for the people who already flashed with a oc kernel.
JCreations said:
Great work! Might be a good idea to add a file with stock kernel and bcm4329.ko for the people who already flashed with a oc kernel.
Click to expand...
Click to collapse
The stock kernel and bcm4329.ko are already included
Just delete system/etc/init.d/03gtrabOC and you are back to stock
It stangely doesn't work for me.
I already have root and s-off. But when I apply the update my DZ freezes on boot-up.
I'm doing a nandroid recovery now. Hope it wil boot-up again.
gtrab said:
The stock kernel and bcm4329.ko are already included
Just delete system/etc/init.d/03gtrabOC and you are back to stock
Click to expand...
Click to collapse
hey gtrab i have kernel version 2.6.32.21-gd2764ed
will this still work on my desire z?
maus010 said:
It stangely doesn't work for me.
I already have root and s-off. But when I apply the update my DZ freezes on boot-up.
I'm doing a nandroid recovery now. Hope it wil boot-up again.
Click to expand...
Click to collapse
1.- Maybe you have a different ROM, o this is not "stock" for you
2.- Maybe yoou have a corrupt download. Did you check the MD5 checksums ??
Related
Beta testing of a new kernel that allows over clocking up to 660mhz. I have no time to do a lot of testing. So far MCR rom 3.2 is stable and fast with it. So I am calling for testers. The kernels are using ramzswap.
Download
Note: It will not work on 2.x rom as it is a 2.6.27 kernel.
This is great news. I would try it, but I have a CDMA Hero.
I think this also works for 2.1 ROM; I'm using Vanillain 1.0 and I went from 145 CPU benchmark to 154...
how to apply?
and does setcpu support this setting yet?
thanks for the work
1) Download the SetCPU in the link
2) Drag the SetCPU file into your SD card
3) Open and install using any file manager (I use Astro)
4) Download the setcpu.txt file into your SD card (not into a folder)
5) Open SetCPU and press Menu > Device Selection > Scroll all the way down to "Custom Frequency Config" (last on the list)
6) Then set up the frequency as you desire
is this based on teknologist's kernel? this shall be included in MCR once stable enough.
Is root needed?
Yes you need root for this to work, and just on a side notice using the overclock widget seems to work to.
worked on my hero i guess.. but how stupid m i, i tried edit the txt file and push into my nexus and try the settings... damm.. f*ck, it did not work at all... damm...
doesn't do anything for me according to linpack. Same amount of Mflops/s
edit: and screen went black and never got out of it.... :S
660 MHz ?? Bye bye batery...
Myriad Group is developing a new virtual machine for android that increases 3x the speed of the system running aplications, with the same hardware, and a optimized use of the batery and will allow richer grafics... The name of the project is Dalvik turbo and it will be show on the Mobile World Congress of Barcelona...
You can read it here: www(dot)mobileburn.com/news.jsp?Id=8684
I hope we can use it to our Hero's ...
Dalvik Turbo looks extremely promising. If 3x performance can actually be achieved, then we have to ask Google... what were you thinking with Dalvik's original design?
Please, read this:
http://android.modaco.com/index.php?s=&showtopic=302182&view=findpost&p=1185063
What do these numbers mean?
Sergio PC said:
Seems to be working fine, you can tell in various instances such as scrolling in menus etc...
Lox_Dev you the man! thanks.
Click to expand...
Click to collapse
BogoMips is not the clock!
It's the efficiency of running a bootonly calibration loop.
This doesn't mean that Lox_Dev work isn't a great thing, though.
so in a nutshell, whith this mod does hero run faster or not?
ermacwins said:
so in a nutshell, whith this mod does hero run faster or not?
Click to expand...
Click to collapse
I don't think so.
Just because your car shows 200mph in the speedometer doesn't mean it can go that fast.
Really, read here: http://android.modaco.com/index.php?s=&showtopic=302182&view=findpost&p=1185063
Uqbar said:
BogoMips is not the clock!
It's the efficiency of running a bootonly calibration loop.
This doesn't mean that Lox_Dev work isn't a great thing, though.
Click to expand...
Click to collapse
Alright i understand ill edit that post to find some explanations.
Thanks man.
Hello I'm flash that kernel and after reboob i see circle showing droid logo => htc =>droid and that replay again and again some clue ?
After a backup I usually wipe everything out before installing a new rom.
Try this.
Thanks to Leshak , AndSecTest, mimocan, Unhelpful, xan, Supercurio and husq510 for the help.
This project started based on information found here:
http://forum.xda-developers.com/showthread.php?t=740514
But is has soon revolved into more fixes, patches and hacks. Thanks to all the developers involved and do buy them beers so they can continue to work on the fixes.
I've tested it to work on my phone but i cannot guarantee it will work on yours or if it will damage your phone so use it at your own risk. See known issues below if the problems have been resolved
Primary Features
- ext2/3/4
- Support I/O Scheduling for CFQ (stock), Noop, Deadline and Anticipatory
- Overclock and Undervolt support
- Overclocking for better performance. If you do not want to OC, use SetCPU to set Max at 1Ghz and enable checkbox Set on boot
- User defined Undervolt to save battery especially at lower frequencies. Use Xan's app for easy GUI control - here
- Also use Xan's app to change IO scheduling
- Rooted ADB shell for Android commander compatibility
Requirement
- i9000
- For Eclair 2.1 Only (Will not work on Froyo firmware)
My setup for cross compile without wakeup lag
- Use ct-ng crosstool
- Copy config file from arm-unknown-linux-gnueabi
Download
See attachment
Stock Kernels for reverting
Stock JM3 v3 kernel
Stock JM2 kernel
Stock XWJM5 kernel
Instructions:
- Extract the tar file from .7z
- Load tar file in PDA using ODIN and flash
- Do not check repartition and do not use pit file
- Use SetCPU to adjust frequencies
Reporting Problems
Please provide information below to help me understand:
kernel version: (eg oc120uv2-ctng)
UVLF setting (if kernel supports): (eg 50)
UVHF setting (if kernel supports): (eg 25)
descriptions:
Known Issues
- ondemand setting is unstable (need more verifications)
TO DO LIST
- BFS scheduling
- kernel modules (submit request)
Changelog
oc120_voodoo_b4.2
- enable CWM support even with voodoo ext4. Caveats: CWM will unmount /data after nandroid backup, you will not be able to remount /data in ext4 until you reboot back to recovery. Also, restore does not work when trying to restore /data.
- fixed check for debug_mode (it used to create logs in /sdcard/Voodoo/logs regardless if you enable*debug in /sdcard/Voodoo/)
oc120_voodoo_b4.1
- BLN patch v4 from neldar (http://forum.xda-developers.com/showthread.php?t=772672)
- All credit goes to author
- Signed update.zip format so rename file to update.zip and copy to /sdcard
- use recovery to flash
oc120_voodoo_b4
- updated to voodoo b4 (http://project-voodoo.org) - please read Documentation/FAQ, if you have previous installed Voodoo Beta1, please uninstall before upgrading
- Excludes color patch for later release
- All lagfix credit included in this build goes to Supercurio, please buy him a beer or two so he can continue on working on the project
oc120_voodoo_b3.1
- fixed init.d not working
oc120_voodoo_b3
- remove performance governor from startup cos i9000 dont need that
- added init.d support
oc120_voodoo_b2
- Use stock GPU ~200mhz table
- Voodoo2 lagfix (http://project-voodoo.org) - please read Documentation/FAQ, if you have previous installed Voodoo Beta1, please uninstall before upgrading
- Excludes color patch for later release
- All lagfix credit included in this build goes to Supercurio, please buy him a beer or two so he can continue on working on the project
oc120uv2
- Unhelpful patch for GPU table (http://github.com/Unhelpful/linux-galaxy/commit/5a729d3e2189159a20b00e0c331f0b112490e075)
- Interactive governor (http://github.com/Unhelpful/linux-galaxy/commit/aea72a98a2f261901d6f28f2d1deae3921d35948)
- user configurable UV settings (default value = 0 for UVLF and UVHF) for conservative governor only
- /sys/devices/system/cpu/cpu0/cpufreq/conservative/UVLF_mV (for 100-800mhz)
- /sys/devices/system/cpu/cpu0/cpufreq/conservative/UVHF_mV (above 800mhz)
- for example # echo 50 > /sys/devices/system/cpu/cpu0/cpufreq/conservative/UVLF_mV (will UV by 50mV for 100-800mhz)
- for example # echo 50 > /sys/devices/system/cpu/cpu0/cpufreq/conservative/UVHF_mV (will UV by 50mV for 1-1.2ghz)
- Setting increment of 25 (eg 25,50,75,100). Anything out range may hang
- Anything above 100 will be set to 100 (but I doubt you can get 100mV without crashing)
- After setting, do ur benchmarks and if everything is stable, you can add the command above into your init script depending which lagfix you have, add into your script.
Thanks!
Some questions:
1) the first thread about oc mentioned 1.2ghz, was this unstable for you?
2) Is this over-volted, under-volted, or no changes in voltage?
3) I'm guessing if I update to this kernal, I will loose any features of other kernals, like the lag-fix kernal?
I hope you can persuade the other devs to include this in their roms.
It this just for the unbranded SGS or does it work for TMO vibrant too?
Novek said:
It this just for the unbranded SGS or does it work for TMO vibrant too?
Click to expand...
Click to collapse
the kernel is just for the international version
it is just a test, i hv not test the limit yet.. this is a new phone so want to take it easy
i kept the voltage stock so just overclock a little and if its stable, will do more . More testing and reading is needed before i touch on the voltage.
it does not include mimocan's mod, i will work on it next release
Not Work
Hi GS S user,
not work in XXJP3 rooted Firmware!
Flash, Boot and go in Recovery menu!
Sir-ay said:
Hi GS S user,
not work in XXJP3 rooted Firmware!
Flash, Boot and go in Recovery menu!
Click to expand...
Click to collapse
XXJP3 is froyo.. android 2.2
he clearly states it works in eclair... android 2.1
Nice job cant wait to see how high the new hummingbird cpu can go. The galaxy s 2 has same cpu and is running at 2 ghz (if the leaked info is correct). I hope we can push it up to 2ghz with out to much voltage/heat increase.
[[ Cold ]] said:
XXJP3 is froyo.. android 2.2
he clearly states it works in eclair... android 2.1
Click to expand...
Click to collapse
upps
I will OC!!!!!!!!!!
Do you notice the postive effects of the overclock in any way? What does it do with benchmarks? Also do you test for (temperature) stability with some games as well, as they use the graphics card a lot which is on the same chip. Even when not overclocked the SGS can get prettty warm.
Installs nicely, oc ok to, but dont see that much increase in linpack.
Nice work tho.
Any chance to have ext 4 support in next update?
Thanks :
updated to v2
raspdeep said:
updated to v2
Click to expand...
Click to collapse
you're fast, lol. Thanks.
INeedYourHelp said:
your fast, lol. Thanks.
Click to expand...
Click to collapse
update before i go to bed
Guys, how do I use SetCpu?
Was 1.2ghz unstable?
Sent from my SGH-T959 using XDA App
interested in this... Allthough the phone does seem to get hot during heavy use, it doesn't get 'too' hot.
I have seen about 47 degrees celcius max read from battery temp (which seems to be cpu temp on our phones as my battery was stone cold)
Hi any possibility get v1 without mimocan.
Got samset including it nd sgs wnt boot cause of mimocan included.
thanks
I am using JM2. Does this make my phone any faster? Does it maked it lag free?
After tested this oc.. i am bit unsure: i get no performance increase... Is it confirmed that its functional?
First is an O/C kernel that I built from the HTC source. This kernel is stable and with the right profiles setup in setCPU has given me very good battery life. I'm giving coolbho3000 credit here as his post in the G2 forums is what helped me to do this. I am also acknowledging gr8gorilla who helped me several times through this process. Second is a kernel built from the latest CM kernel zource from zinx. It has proven to be very stable (after tweaking the voltages).
Now for the boring part ... If you choose to flash this you do it at your own risk. I am in no way, shape, or form responsible if you flash this and your phone turns into a paperweight. Once again, flash this at your own risk.
There, now that that is out of the way we can get on to the good stuff.
Make sure you choose the right kernel. The stock kernel will break your CM install if you flash it.
Kernels for Stock and Stock based roms
Kernel 2.6.32.21grankin010OC0v0.05
http://t1mgmaps.com/file.php?id=24
Md5Sum: 72c3430177eeefc6ff4b2c658efa0949
Features:
adb root enabled by default
system set r/w at boot (no need to remount)
voltages tweaked
cacheflush hack from zodttd integrated
noatime for better FS performance
Kernel 2.6.32.21grankin01-OC-v0.04
http://t1mgmaps.com/file.php?id=20
Md5Sum: a8668bdb2c1c7ca6ef0d9fbdafbe6969
Features(+v0.03):
Same features as v03 but with different voltages
Kernel 2.6.32.21grankin-OC-v0.03
http://t1mgmaps.com/file.php?id=19
Md5Sum: a82111399a9a4d570def14dce563a073
Features(+v0.01):
Voltages tweaked - Hopefully this one is more stable for you guys.
Kernel 2.6.32.21grankin01-OC-v0.02
http://www.mediafire.com/?o216o3b6jea13f9
Md5Sum: 2fdcde29532339743f0c41daae32db7f
Features(+v0.01):
O/C'd to 1.8Ghz with several intermediate clock speeds
Voltages for 1.7Ghz have been turned up a little bit to address stability concerns
Kernel 2.6.32.21grankin01-OC-v0.01
http://www.mediafire.com/?bqbdgb38m15n789
Md5Sum: af73907d0f9d8fbc1b5dcc41ea6b9552
Features:
Ext4 support (if you want to play with it)
O/C'd to 1.7Ghz with several intermediate clock speeds
ADB has root privileges automatically
System is set R/W on boot (no need to mount anymore)
HTC Perflock is disabled (pre-requisite for over-clocking)
CPU Governors:
Performance
Conservative
OnDemand
UserSpace
PowerSave
Kernels for CyanogenMod and MIUI
Do not use these with CM7-GB. They will not boot properly.
Kernel_grankin01-CM-OC-v0.10
http://t1mgmaps.com/file.php?id=26
Md5Sum: 6c4f5b18ca5509cc83cf5eac0667b3e0
Features:
Same as v09 but video works
Kernel_grankin01-CM-OC-v0.09
http://t1mgmaps.com/file.php?id=25
Md5Sum: 63bcc734bf33cb30eb0dd335f807bf10
Features(+v0.08):
Wifi is fixed in this release
Kernel 2.6.32.27grankin01-CM-OC-v0.08
http://www.mediafire.com/?4hs3ix1b8rdmz36
Md5Sum: 7822eb4dcf547d712c455c72c83d4118
Features:
Noatime for better FS performance
Cacheflush hack by zodttd is integrated
Voltages have been tweaked (again )
Inludes all the standard features also
Kernel 2.6.32.27grankin01-CM-OC-v0.07
http://t1mgmaps.com/file.php?id=18
Md5Sum: 9273d9405e6bdb76f754c96916e36262
Features(+0.06):
System Permanent R/W Fix (edited code in v06 and left that out ... oops)
Video is fixed
Voltages changed (hopefully for better battery life)
Kernel 2.6.32.27grankin01-CM-OC-v0.06
http://t1mgmaps.com/file.php?id=17
Md5Sum: 55f04250126b6763db2f180b2829e4ac
Features(+0.05):
Newest Bluetooth fixes
Newest Video fixes - broken/missing code
System Permanent R/W - Broken (edited code and left that out ... oops)
Kernel 2.6.32.27grankin01-CM-OC-v0.05
http://t1mgmaps.com/file.php?id=16
Md5Sum: 026e5717311fa42da073ac8a9fc442d5
Features(+0.03):
Bluetooth fix
Charge issue fix
Kernel 2.6.32.27grankin01-CM-OC-v0.03
http://www.mediafire.com/?3g6yv8g9ypsu953
Md5Sum: 0424f5565387f86818c1e67ff636443e
Features(+v0.02):
New version of kernel includes fix for video
Kernel 2.6.32.27grankin01-CM-OC-v0.02
http://www.mediafire.com/?jsux5wtj7mgcvzo
Md5Sum: 8c243df7f53143a6a3be5292073f052b
Features:
Ext4 support (if you want to play with it)
O/C'd to 1.8Ghz with several intermediate clock speeds
ADB has root privileges automatically
System is set R/W on boot (no need to mount anymore)FIXED
HTC Perflock is disabled (pre-requisite for over-clocking)
CPU Governors:
Performance
Conservative
OnDemand
UserSpace
PowerSave
Interactive
CM7-Gingerbread Kernels
Do not use these with CM6-Froyo! They have different ramdisks and wifi options built in.
These kernels have no issue with video. If you are having trouble with youtube and such update your GB rom to one of the newest. There was a memory leak in the source for the rom itself that zinx has fixed. Thirty to Forty-Five minutes of straight youtube action and I had no problem at all.
Kernel_2.6.32.27grankin01-CM-GB-OC-v0.09
http://t1mgmaps.com/file.php?id=29
Md5Sum: 7565340ac31ff7560d45ab42e043acc0
Features(+v0.08):
Changed voltages a tad
I get great battery life with light to moderate usage on this kernel
Kernel 2.6.32.27grankin01-CM-OC-v0.08-GB
http://t1mgmaps.com/file.php?id=22
Md5Sum: b7b5fde8db99a01d827c3b7fc81a387e
Features:
Noatime for better FS performance
Cacheflush hack by zodttd is integrated
Ext4 support (if you want to play with it)
O/C'd to 1.8Ghz with several intermediate clock speeds
ADB has root privileges automatically
System is set R/W on boot (no need to mount anymore)
HTC Perflock is disabled (pre-requisite for over-clocking)
CPU Governors:
Performance
Conservative
OnDemand
UserSpace
PowerSave
Interactive
I have packaged this into an update.zip format that you can flash through your custom recovery. Simply choose to install a zip from the sdcard and pick the update package to install it. It will install the wifi driver at the same time so you don't need to worry about that. Everything works with this kernel so far for me if you have any problems please post them and I'll see what I can do to fix them.
Remember that you hardware is not the same as your neighbor's so while he may be able to max the settings out and run stable your device may need to be set to a lower clock speed to run stable.
Source code for both kernels has been added to github. If you want to play around with them download source from here: https://github.com/grankin01
Happy Modding/Devving!
wow, thank you sir
I was just about to start testing kernels with Zinx's CM6 anyway. Looks like yours is first.
hmmm... could not run update.zip through clockworkmod. I was looking to extract the files and push them manually, however, I don't see a zImage file to push.
No luck with the miui rom. Cant get past the splash screen.
Sent from my HTC Glacier using XDA App
monnietron said:
No luck with the miui rom. Cant get past the splash screen.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Yeah, its based off of CM. I'm working on one built fromthe CM source right now.
Christopher3712 said:
I was just about to start testing kernels with Zinx's CM6 anyway. Looks like yours is first.
hmmm... could not run update.zip through clockworkmod. I was looking to extract the files and push them manually, however, I don't see a zImage file to push.
Click to expand...
Click to collapse
There isn't a zimage. I wrapped it all up in its own boot.img and then packaged it in the update.zip with the wifi module.
Does this break the nightly CM ROM? I know gorilla's kernel does.
I appreciate your work!
TmobileDash12 said:
Does this break the nightly CM ROM? I know gorilla's kernel does.
I appreciate your work!
Click to expand...
Click to collapse
Yes, it breaks it horribly. I'm working on it now.
grankin01 said:
Here is an O/C kernel that I built from the HTC source. This kernel is stable and with the right profiles setup in setCPU has given me very good battery life. I'm giving coolbho3000 credit here as his post in the G2 forums is what helped me to do this. I am also acknowledging gr8gorilla who helped me several times through this process.
Click to expand...
Click to collapse
Thanks for this grankin01. Great work to you and the others involved.
So no miui or cm6 on this kernel correct I just dont wanna break anything.
Sent from my icey cold glacier 4g freezing every phone in its path.
jriv said:
So no miui or cm6 on this kernel correct I just dont wanna break anything.
Sent from my icey cold glacier 4g freezing every phone in its path.
Click to expand...
Click to collapse
Not yet. It will work with the rom that you have installed right now though.
hey guys. im a noob to android. every other phone i have had has been winmo. i wanted to try this oc kernel because it seems easier to install than the gorilla one. however i ran into a problem when installing. i have a stock rom 2.2.1, perm rooted s=off, using clockwork recovery. i backed up my rom and flashed via rom manager. it then began to send me into a boot loop never getting past the first screen. just kept turning off and rebooting. soooooo i rebooted directly into clockwork and tried to do it from there and the same thing happened. so i restored my recovery and now everything is back to normal. can anyone point me in the right direction? i did notice that in clockwork it gave me two options to flash the kernel or to flash an update from the sd card. should i have flashed the update zip instead of the kernel or flash both.. sorry im a partial noob. i know how to use adb a lil and the emulator, this is the first thing i flashed on my phone and nearly had a heart attack from thinking i was bricked! any help is appreciated
Do you already have setCPU installed? Not everyone's phone will be able to reach the maximum speed without bootlooping or locking up. Just the nature of the beast. Try setting your speed down in setCPU (if you already have it installed) and turn set at boot off and then flashing and rebooting. Then you can test the speeds one by one to know what is working for you.
Edit: New kernel for CM and MIUI is nearly ready. 1.8Ghz with over 3200 on quadrant!!!
grankin01 said:
Not yet. It will work with the rom that you have installed right now though.
Click to expand...
Click to collapse
Oh I'm running miui now just haven't changed my sig lol
Sent from my icey cold glacier 4g freezing every phone in its path.
Can't wait for your kernel for CM! I wanna see my phone unleash its true power! Lol thanks dude.
Sent from my HTC Glacier using XDA App
grankin01 said:
Do you already have setCPU installed? Not everyone's phone will be able to reach the maximum speed without bootlooping or locking up. Just the nature of the beast. Try setting your speed down in setCPU (if you already have it installed) and turn set at boot off and then flashing and rebooting. Then you can test the speeds one by one to know what is working for you.
Edit: New kernel for CM and MIUI is nearly ready. 1.8Ghz with over 3200 on quadrant!!!
Click to expand...
Click to collapse
thanks.... stupid me... duuhhh.... i have setcpu installed already and it is set at "set on boot".... thanks for the help man... will give it a go and let you know how that works out!
Edit: turning off set on boot in setcpu didnt work. still boot looped. i will try uninstalling setcpu, then flashing, then reinstalling. i dont get it though because my highest on setcpu is the stock 1024.... hmm maybe its the profiles i have set up... either way, gonna give it another go in a few. im gonna get this working today if its the last thing i do. so thankful for backups to restore lol
grankin01 said:
Do you already have setCPU installed? Not everyone's phone will be able to reach the maximum speed without bootlooping or locking up. Just the nature of the beast. Try setting your speed down in setCPU (if you already have it installed) and turn set at boot off and then flashing and rebooting. Then you can test the speeds one by one to know what is working for you.
Edit: New kernel for CM and MIUI is nearly ready. 1.8Ghz with over 3200 on quadrant!!!
Click to expand...
Click to collapse
That's...retarded. I can't wait to see how that handles. lol! Are you incorporating U/V's on the lower frequencies as well?
UV / OC?
Is this a UV / OC kernel? Thanks for the help.
Christopher3712 said:
That's...retarded. I can't wait to see how that handles. lol! Are you incorporating U/V's on the lower frequencies as well?
Click to expand...
Click to collapse
Yes, and O/V's in the higher frequecies for stability. This one was picky.
InvisibleHero said:
Is this a UV / OC kernel? Thanks for the help.
Click to expand...
Click to collapse
Only in the lower frequencies. The higher frequencies weren't stable running lower voltages.
Thanks OP. When you say the lower ranges, at which MHz did you not UV? Just curious. I am thinking of not OC'ing more than 1.4MHz and didnt know if I would get the UV benefit.
*EDIT* Meant GHz
Presenting, my HD2 NAND Android kernel!
Summary
To provide, stable, fast and up to date kernels for our HD2s running either DFT or CWM nand android
Features
- 1190, 1190 Undervolt auto scaling versions available. listed is kernel MAX speed, it will scale to anything less depending on demand and ROM installed. Default max seepd is 998 without the use of an overclocking app
- Faster IO tweak taken from hastarins kernel tree
- Latest YAFFS driver
- Always built from latest source tree
- Very responsive kernel configuration
- Battery efficient
- Supports EXT 2 / 3 / 4, depending our your chosen ROM
- RMNET / PPP both supported, depending on your chosen ROM
- Bluetooth, WiFi, LED notifications all working correctly
- Smartass (default), Interactive and all standard CPU governors supported
- CIFS supported
- MAX defualt speed is 998, use setCPU or similar to overclock if you so wish
- cLK supported
- Automatic Extended Battery Support
Choosing your kernel
1190Mhz
This should work perfectly on nearly every HD2. It offers good speed at a slight cost to battery life. It will, depending on how your chosen ROM implements it, scale anywhere between 245-1190 Mhz depending on load
1190Mhz Undervolt
Same performance as 1190Mhz above, but with lower CPU voltage settings. It will work perfectly on most phones, but not all. If you experience FCs or random reboots then chose one of the aforementioned versions. This kernel offers significant battery life improvements if it works for you.
About the source and GPL compliance
The kernel is built direct from main GIT. You can access the commit logs and sources here on gitorious
The changes and modifications as mentioned in the changelog, and my build .config are all in my separate patch file, which you can download here
Download
All the kernels are supplied on one zip package. Contained within the package are the 2 kernel zImages and the associated modules. Chefs and advanced users will know what to do with these.
Download v11 (files only) --> http://htcfanboys.com/CleanEx/Kernel/DISTRIBUTION KERNELv11.zip
Download CWM ZIPs FOR NON TYPHOON ROMS (*series A*)
http://forum.xda-developers.com/showpost.php?p=11968195&postcount=408
Download CWM ZIPs FOR TYPHOON ROMS / ROMS SHIPPED WITH TYTUNG v6 (*series B*)
these include the wpa_supplicant fix for Wifi / bootlooping
http://forum.xda-developers.com/showpost.php?p=11974837&postcount=471
(the RAM named ones are for typhoon ram build)
Flash under cwm.
Wipe Cache and Dalvik Cache.
~~~~IMPORTANT~~~~
If you are not sure you need the WiFi patch, flash the *series A* kernel. If you find your phone bootlooping / wifi crashing, flash the *series B* kernels
As a backup, the wifi patch remains attached to this post
Changelogs
v11
- Pulled new updates from GIT
- Automatic Extended Battery support
- cLK patches and support built in
- some cleanups
- config changes, more responsive (quadrant wont improve thats IO bound)
v10
- Bug fixes, WiFi should work for everyone without the patch
- Imported the i2c, gsensor, GPU decoupling driver patches to new build tree
- Removed all debugging from kernel (99.9% people dont need it)
- Some build config changes, little more responsive
v9
- Fixed WiFi driver for non GB builds
- Fixed default CPU speed @ 998 max
- Fixed crashes / bootloops / random reboots
v8
- Switch to main branch, import speed mods from previous version
- Fix WiFi for GB / non-GB builds
- config changes for better response times
v7
- Switched to tytungs branch
- Swapped tytungs GB only WiFi driver for main one from primary GIT
- Added CIFS support
- Removed 998 / 1536 speeds
- 1190 Normal is not undervolted and will work for everyone
- 1190 uv is undervolted and might not work for everyone
- Reverted to SLAB, should fix bootlooping
- Other minor config changes
v6
-First public release
Disclaimer
I am not responsible for any damage, loss of data or earnings resulting from the use of my kernels. Users who wish to use an overclock kernel do so on the understanding that running any device outside its normal operating parameters may have damaging consequences
Credits:
Cotulla, Bepe, Hastarin, Tytung, Rafpigna, Markinus and all other kernel source contributors as mentioned on the GIT Commit logs.
Fadzy, JoPlayer, Dave and Jan-Willem for their never ending support, friendship, help and good laughs.
First! This is in a kleandroid 2.55?
yes....and no
its just been recompiled, and i added pure 998mhz for people who have phones that cant take the faster speeds!
Awesome! This is the best kernel, have been using it for like three days and it gives me the best battery life and performance. I loved it. I'll pack this one into cwm zip when I get home and flash it.
Edit: how much does battery life actually improve with the uv one? Now I'm torn between the uv and oc to 1.5ghz. Battery or performance?
Sent from my HD2 running Android on NAND
Can anyone test this on sergio's coredroid 1.4 and post results? I would but dont have my computer for a couple days.
g.lewarne
Please add 998Mhz kernel to next update CleanDroid!
Derek0228 said:
Awesome! This is the best kernel, have been using it for like three days and it gives me the best battery life and performance. I loved it. I'll pack this one into cwm zip when I get home and flash it.
Edit: how much does battery life actually improve with the uv one? Now I'm torn between the uv and oc to 1.5ghz. Battery or performance?
Sent from my HD2 running Android on NAND
Click to expand...
Click to collapse
you might get maybe possible 15% more battery time out of the UV kernel. in ideal circumstances in a perfect world of course
CWM
How to use that? :-(
Any zip to use on cwr?
felipemadox said:
How to use that? :-(
Any zip to use on cwr?
Click to expand...
Click to collapse
Not yet, it is still underway.
I made some cwm zips, before going to sleep. I wasn't able to test them because it's late, but they should work. If g.lewarne wants to post them in the OP, i have no problem. Inside the zip, after you download, there are 4 more zips, one for 998, 1190, 1536(this one doesn't work for me) and 1190 UV. Just flash the one you like and enjoy!
http://www.multiupload.com/DPR3F7TW7J
http://www.mediafire.com/?sqg55hze9evgchb
If you find this useful donate me a click on my thanks button.
Thanks derek.
g.lewarne said:
Thanks derek.
Click to expand...
Click to collapse
Once tested, please update, i will test a rom on it.
raviluke said:
Once tested, please update, i will test a rom on it.
Click to expand...
Click to collapse
I can't test anything now as im off to bed . Its 2am and I did a 14 hour day. Yawn!
report
Derek0228 said:
I made some cwm zips, before going to sleep. I wasn't able to test them because it's late, but they should work. If g.lewarne wants to post them in the OP, i have no problem. Inside the zip, after you download, there are 4 more zips, one for 998, 1190, 1536 and 1190 UV. Just flash the one you like and enjoy!
Please give feedback, again I say, they should work but haven't tested them. I've made all his previous kernel versions cwm zip, and flashed them successfully.
http://www.multiupload.com/DPR3F7TW7J
http://www.mediafire.com/?sqg55hze9evgchb
Click to expand...
Click to collapse
Thank you!
1190Mhz Undervolt its working here.
1536 does not work for ne! Causes random reboot on boot. If you want to test it, do so, but i'm pretty sure it's a problem with the kernel, not with the zip, because the one g.lewarne uses on his rom had 1536 and caused random reboots too, cant be a coincidence . Also, youre welcome!
I flashed the 1190 to test, now off to flash the UV one!
Sent from my HD2 running Android on NAND
raviluke said:
Once tested, please update, i will test a rom on it.
Click to expand...
Click to collapse
It works, but not the 1536 one, or at least not for me.
Sent from my HD2 running Android on NAND
Might I just point out that in real world situations the 1190 kernels are just as fast. 1536 is really just a gimmick but some people want it so there you to. Myself, I run my own personal 1305
Sorry for spamming this thread, but I must ask, is uv dangerous? If so, what are some steps I have to follow to prevent my phone from getting fu'd? Like for example,i know that for the 1536, we shouldn't have it always o/c'd to the 1.5ghz.
Sent from my HD2 running Android on NAND
Derek0228 said:
Sorry for spamming this thread, but I must ask, is uv dangerous? If so, what are some steps I have to follow to prevent my phone from getting fu'd? Like for example,i know that for the 1536, we shouldn't have it always o/c'd to the 1.5ghz.
Sent from my HD2 running Android on NAND
Click to expand...
Click to collapse
Uv Isn't dangerous in the same way, the only problem is possible crash, cpu is safe
Derek0228 said:
I made some cwm zips, before going to sleep. I wasn't able to test them because it's late, but they should work. If g.lewarne wants to post them in the OP, i have no problem. Inside the zip, after you download, there are 4 more zips, one for 998, 1190, 1536(this one doesn't work for me) and 1190 UV. Just flash the one you like and enjoy!
http://www.multiupload.com/DPR3F7TW7J
http://www.mediafire.com/?sqg55hze9evgchb
If you find this useful donate me a click on my thanks button.
Click to expand...
Click to collapse
Installed the UV Kernel on Coredroid v1.4 TMOUS ver its getting stuck at GO GO GO
Hey Guys,
I thought while waiting for the first custom kernels that maybe i should have a look at the interactive values and try to tweak them based on this way:
http://forum.xda-developers.com/nexus-5x/general/guide-advanced-interactive-governor-t3269557
So i took a script from @Alcolawl and modified it to work with our device. Many thanks for his scripts.
I adjusted the values to our snapdragon 820 as the original scripts are for the nexus 6p which runs with a snapdragon 810. (octa on the 810 vs quad-core on the 820)
I´d highly recommend to try these values as it gave me a significant boost in battery life. here is a screenshot:
https://drive.google.com/file/d/0BxbxiBXaZVu-N1lsRTMyZ2hsY1k/view?usp=sharing
https://drive.google.com/file/d/0BxbxiBXaZVu-N1MzamRvM2FVZlk/view?usp=sharing
BIG UPDATE: with base 1.80 i´m not able to trick the touch/Input boost from htc´s pnpmgr with a chmod command like i did before. so all versions since Butterfly v11 will disable pnpmgr completely.
that means if you Play high end games and your device overheats like crazy please Report back. i had no Problem until now.
also there are now 2 versions. the oc one is for overclocked cpus with elementalx. without oc is for the default clock speeds.
here are explanations on what the 2 different stragies do:
Butterfly - A culmination of all strategies, provides smoothest performance of all currently published settings, though battery savings are a little more modest. Excellent for light and moderate users; heavy/marathon users might want to check out a different setting profile as it gets battery intense with heavy usage.
GhostPepper - Uses a quantized, frequency-aligned parametric curve to influence low core clock rates while providing extremely smooth transitions from each clock rate and exceptional battery life. Good for light to medium usage and multitasking.
So basically there will be two ways of applying this mod.
First one is via scripts. this allows to set parameters outside of the interactive governor controls like cpu boost, editing of pnpmgr, min/max frequencies etc. so basically there´s more control.
Second one is via EX Kernel Manager. I will upload the profiles and you can apply them directly into the app. This will however only affect the tunables of the interactive governor. Touchboost has to be set manually for the profile to work exactly as intended.
when the phrase "elex" is in the zips name it is for use with ex kernel manager app (loading profile in governor options screen.
so to try the script method follow these steps. (and before do a nandroid as always)
1. download the attched file.
2. unzip the file, choose the correct script (oc if you have overclocked)
3. with a root explorer or terminal copy the file to system/su.d
4. set the correct permissions (rwxr-xr-x)
now you may either choose to change the settings temporary (step 5A) until the next reboot or permanently upon each reboot (step 5B)
5A. rename the file to 50ghostpeppertenv3.sh
use any script manager and run the script from this location (system/su.d)
alternatively use any terminal emulator app with the following commands
su
cd system/su.d
sh 50ghostpeppertenv3.sh
Be advised that the script takes in its current state 60 seconds to be applied. So the changes need a minute to be applied.
now check if the script has applied
- to do this go to sys/devices/system/cpu/cpu0/cpufreq/interactive/target_loads
- if it looks like this: "25 480000:35 652800:45 844800:60 960000:75 1113600:85 1228800:90 1401600:95 1593600:100" the script was applied successfully
- the values changed with each update. what´s important to check is just the generel layout
5B. (-if you did the temporary approach beforehand remove the .sh)
- it should look like 50ghostpeppertenv3 (make sure there are now spaces at the end)
reboot and check if the script has applied
- to do this go to sys/devices/system/cpu/cpu0/cpufreq/interactive/target_loads
- if it looks like this : "25 480000:35 652800:45 844800:60 960000:75 1113600:85 1228800:90 1401600:95 1593600:100" the script was applied successfully.
-- the values changed with each update. what´s important to check is just the generel layout
Important!!!
if you run permissive and run into no signal issue due to this look here
if you should run into a no signal issue where your baseband shows as unknown under software status ( currently on custom roms eg leedroid) you have to put a script to system/su.d that sets selinux to permissive. attached is such a script.
unzip it. copy it to system/su.d
set the same permissions as the ghostpepper script and your good to go.
running in terminal the command "getenforce" should return permissive.
Second method via Elemental App:
1. Download the desired profile from the attachments
2.Extract the Profiles from the zip
3. Choose the Overclocked(oc) version if you overclocked
4.Copy the file to sdcard/ElementalX/gov_profiles
5. Open the app and apply the values
let me know if it brings a little battery boost for you. you may also let me know if you face performance issues.
Thank you and have fun testing it.
Changelog:
Ghostpepper:
v1: Initial Release
v2: Tweaking The Script so the values will get applied properly on all roms
adding a permissive script in case of getting enforced
v3: Removed touchboost so the profile may unleash its full potential <<--- results in overall slower device.
v4: Added back short input boost
v4withtb: Added back original touch boost from htc
v8: New try on getting the interface smooth and disabling touchboost (minimal stutter remains)
v8withtb: same as v8 touchboost is still active
v9: only one version with touchboost now. tweaked target loads (lower freqs are used more), short input boost
there are now two files inside the zip.
v10: try to further improve frequency usage, less aggressive scaling
v11: fix in case Little cores might get stuck at highest clock
Butterfly
v4: Initial Release
v4withtb: Initial Release with original touch boost from htc (extremely smooth)
v6withtb: tuned the values and kept touchboost from pnpmgr, kernel touch boost is disabled, extremely smooth for me
v7: less aggressive scaling, performance should be really good while reducing less power than v6
v9: basically scaling is tuned to respect the crossover effieciency point from big and little cluster
v11: updated to work on base 1.80
- disable pnpmgr completely because the chmod trick for disabling pnpmgr´s touchboost is no longer working
- enable msm_thermal and core_control
v12: tweak some values to work better with the new base
v13: hotfix as i made a mistake in the previous version
credits:
thanks to @Alcolawl for the script template
also thanks to @soniCron for the original thread
reserved
Thanks for this - about to try it out now.
Question, though - Instead of using init.d, which requires a modified ramdisk, why not just use su.d, which only requires SuperSU?
EDIT: It doesn't seem to be loading when using su.d either.
Thanks. I'm using it now. Will let you know if there are any performance problems.
Can you also make a script that makes the phone smoother?
Captain_Throwback said:
Thanks for this - about to try it out now.
Question, though - Instead of using init.d, which requires a modified ramdisk, why not just use su.d, which only requires SuperSU?
EDIT: It doesn't seem to be loading when using su.d either.
Click to expand...
Click to collapse
Yeah it's strange. When flar will Releases his kernel, init.d will be hopefully working.
Seems like we have to apply it manually for now. When exkm gets updated we can switch profiles there so maybe we should just find good values now.
gusoldier said:
Thanks. I'm using it now. Will let you know if there are any performance problems.
Can you also make a script that makes the phone smoother?
Click to expand...
Click to collapse
Did you face a performance loss with these values? For me it's already pretty smooth.
But sure I may trim it more performance oriented yes.
Freak07 said:
Did you face a performance loss with these values? For me it's already pretty smooth.
But sure I may trim it more performance oriented yes.
Click to expand...
Click to collapse
Compared to stock I feel no performance loss, as smooth as stock. What I actually meant was a new script for buttery smooth nexus like experience.
Btw I will also check how hot it will get. On stock the phone gets sometimes hot watching youtube etc. Hopefully it'll better with this script
gusoldier said:
Compared to stock I feel no performance loss, as smooth as stock. What I actually meant was a new script for buttery smooth nexus like experience.
Btw I will also check how hot it will get. On stock the phone gets sometimes hot watching youtube etc. Hopefully it'll better with this script
Click to expand...
Click to collapse
yeah. I can try this later. But compared to my nexus 6 and my pixel c the 10 is about as smooth.
Freak07 said:
Yeah it's strange. When flar will Releases his kernel, init.d will be hopefully working.
Seems like we have to apply it manually for now. When exkm gets updated we can switch profiles there so maybe we should just find good values now.
Click to expand...
Click to collapse
Got it working with su.d. Just needed to add some sleep at the beginning of the script, otherwise it runs too early and the parameters can't be set .
P.S. You didn't answer my question about why you're not using su.d instead of init.d?
Captain_Throwback said:
Got it working with su.d. Just needed to add some sleep at the beginning of the script, otherwise it runs too early and the parameters can't be set .
Click to expand...
Click to collapse
Can you post it? I will add it to op thank you captain!
Edit: didn't think about it I'm not that knowledgeable.
Or is it just like "sleep 30"?
Edit2: it is indeed. thank you again.
Freak07 said:
Can you post it? I will add it to op thank you captain!
Edit: didn't think about it I'm not that knowledgeable.
Click to expand...
Click to collapse
Sure, right now I'm just trying to find the minimum sleep value that works, and once I do, I'll post it.
RE: su.d, see the 2nd paragraph here: http://su.chainfire.eu/#selinux-policies-supolicy
An additional advantage besides the ones listed there is that in a systemless root setup, su.d doesn't require modifying system at all, which is important for being able to take OTA updates in the future. On this device, I try to touch system as little as possible (if at all), so it might be a better alternative, and doesn't require a custom ramdisk.
Captain_Throwback said:
Sure, right now I'm just trying to find the minimum sleep value that works, and once I do, I'll post it.
RE: su.d, see the 2nd paragraph here: http://su.chainfire.eu/#selinux-policies-supolicy
An additional advantage besides the ones listed there is that in a systemless root setup, su.d doesn't require modifying system at all, which is important for being able to take OTA updates in the future. On this device, I try to touch system as little as possible (if at all), so it might be a better alternative, and doesn't require a custom ramdisk.
Click to expand...
Click to collapse
yeah you´re right. thanks for the reference and the hint. i knew about it but didn´t remember i could use this see my edited last post. with sleep 30 it´s working for me. i updated the op.
besides, do you had any luck in finding your pvs bin? i´m extremely intersted in this. i only found my voltage table so far. maybe you may post yours too. i opened a thread here:
http://forum.xda-developers.com/htc-10/how-to/post-voltage-table-chip-t3383494
if we had a way to check our pvs bin it would be even more helpful.
Freak07 said:
yeah you�´re right. thanks for the reference and the hint. i knew about it but didn�´t remember i could use this see my edited last post. with sleep 30 it�´s working for me. i updated the op.
besides, do you had any luck in finding your pvs bin? i�´m extremely intersted in this. i only found my voltage table so far. maybe you may post yours too. i opened a thread here:
http://forum.xda-developers.com/htc-10/how-to/post-voltage-table-chip-t3383494
if we had a way to check our pvs bin it would be even more helpful.
Click to expand...
Click to collapse
sleep 30 didn't work for me, as I have another script running before this one. It's probably safer to go with sleep 60 to make sure it loads for everyone (sleep 45 did work for me too, but 30 was too short - figured it's better to allow more time). Just a suggestion, or you could just tell people that if it doesn't load for them to increase the sleep value. Up to you, really.
EDIT: And I don't know anything about a pvs bin
Captain_Throwback said:
sleep 30 didn't work for me, as I have another script running before this one. It's probably safer to go with sleep 60 to make sure it loads for everyone (sleep 45 did work for me too, but 30 was too short - figured it's better to allow more time). Just a suggestion, or you could just tell people that if it doesn't load for them to increase the sleep value. Up to you, really.
EDIT: And I don't know anything about a pvs bin
Click to expand...
Click to collapse
Okay i'll edit it to 60.
This is what I'm talking about. Every Chip has a pvs bin. The higher the bin the lower the voltage for a certain cpu frequency.
And every bin has its own voltage table.
http://forum.xda-developers.com/htc-one-m8/general/guide-snapdragon-801-clocking-voltage-t2807173
Hey @Freak07,
Wondering if you can help.. Can't seem to get this working?? Please see attachment. I've set permissions and used terminal to get it working but no dice?
Edit: Nevermind.... I can't follow simple instructions to unzip a file (I was renaming the zip rather than unzipping and renaming that to .sh).... #Special
Edit 2: Went straight for option 5b (so it should have worked on reboot). When I rebooted I lost the radio and have had to clean flash my ROM? I was on Leedroid's Rom when it happened.
rav101 said:
Hey @Freak07,
Wondering if you can help.. Can't seem to get this working?? Please see attachment. I've set permissions and used terminal to get it working but no dice?
Edit: Nevermind.... I can't follow simple instructions to unzip a file (I was renaming the zip rather than unzipping and renaming that to .sh).... #Special
Edit 2: Went straight for option 5b (so it should have worked on reboot). When I rebooted I lost the radio and have had to clean flash my ROM? I was on Leedroid's Rom when it happened.
Click to expand...
Click to collapse
Which Kernel were you on?
This morning i had the same issue when flashing tbalden Kernel using leedroid and my Script.
Freak07 said:
Which Kernel were you on?
This morning i had the same issue when flashing tbalden Kernel using leedroid and my Script.
Click to expand...
Click to collapse
Hey buddy,
I was on the kernel built into Leedroid.
Hope that helps.
rav101 said:
Hey buddy,
I was on the kernel built into Leedroid.
Hope that helps.
Click to expand...
Click to collapse
How did you recover? Full Wipe?
Delete
Freak07 said:
How did you recover? Full Wipe?
Click to expand...
Click to collapse
Yeah, I tried a dirty wipe but that didn't work so had to do a full wipe.