Related
Finally I got my DHD, the time where everything is rolling out, from perm root, to recovery...
The good thing, I'm very happy with my DHD, the bad thing, I'm not familiar yet with android system.
I revised a lot of android and DHD threads, and I faced many new terminologies that belong to android where I like to have explanation for each.
Please let me understand the following issues the beginner way, allowing me to maybe make a simple guide answers for most new android users coming from winmo.
I-General questions:
1-DHD should be multitouch. Then why games like Gameloft are not multitouch like on ipod or iphone?
2-What are the buttons combinations for the different operations like hard reset & boot loader?
3-I read that android can’t share internet via USB for those with no WIFI at home or office. As I knew it’s due to ad hoc issue so it's impossible to get internet via USB cable from desktop. When I plugged my DHD, I choose internet pass through and I got internet on my DHD, is it a new feature implemented in DHD only, or is it a 2.2 update that will work on other devices?
4-Winmo gives the choice to install applications on either the device or SD card. Android have nothing like this, so when I install applications, where do they go, and is there a workaround to put everything on SD card, or maybe give choice to where to install?
5-My DHD comes with an 8 GB mini SD card where there are some folders and files on it. Are they necessary to run the system, what if I replaced this card with another formatted one, what will happen, or what if I format this card?
II-System info:
1-Baseband version (is it like the radio in winmo?)
2-Kernel version (is it one kernel for the entire device? Does it updates like rom or like radio?) e.g. (kAmMa's OC&GOV&BFS Kernel - Performance and Stability. Is this a rom or just kernel that will update some parts of the rom without losing data on the device?)
3-Build number (is this the firmware?) e.g. (i have 1.32.405.3 CLxxxxxx release-keys, what does release keys means?)
4-Software number (or this is the firmware?)
III-OTA ACE with radio:
1-OTA (is it a rom, does it mean over the air, if yes what does that mean? Can we update OTA with no root?)
2-ACE
On winmo (HD2), I know HSPL will let me unlock ISPL so I can install any custom or cooked rom, languages and applications...
For android, as far as I know there is no one click solution. From what I understand to do everything in android with no restrictions u need to do the followings:
IV-How to root Desire HD install h-boot (S-Off) and Clockwork recovery?
Please identify which one is just a process that we do it once in order to unlock it, which is a boot loader run application and which one is an android application:
1-Root (is it what gives access to the root folders of the system that maybe are hidden by default or encrypted?)
2-Hboot
3-S-off (is it security off? if yes, it is security off for what? installing applications, or read write to some encrypted partitions?)
4-Clockwork (is it something necessary to do in order to install custom rom, no adds, backup and so on, or is it something totally independent and related only to unlock the speed of the CPU where you can leave it intact if you won’t play with the CPU speed?)
5-Recovery (from what I understand it seems that recovery is a system shell command like dos or more like bios for android but named as recovery, what can we do with the recovery other than recovering the device?)
6-Recovery image (is it a rom backed on the form of image and provided by developers, so we can install it directly on the device using only the recovery shell?)
V-More things to know about:
1-What is adb?
2-What is busybox?
2-What is fast boot?
3-What is eMMC write?
4-What is ext2 or ext4 (is it like the partition type of the SD card based on UNIX system? if yes, why should we change or modify this ext)
5-Rom manager (is it a desktop pc application or android device application? is it something like I can put the RUU file of the rom on my SD card and using the rom manager I can install the rom from there, nothing more nothing less?)
vuedesprit said:
Finally I got my DHD, the time where everything is rolling out, from perm root, to recovery...
The good thing, I'm very happy with my DHD, the bad thing, I'm not familiar yet with android system.
I revised a lot of android and DHD threads, and I faced many new terminologies that belong to android where I like to have explanation for each.
Please let me understand the following issues the beginner way, allowing me to maybe make a simple guide answers for most new android users coming from winmo.
I-General questions:
1-DHD should be multitouch. Then why games like Gameloft are not multitouch like on ipod or iphone?
2-What are the buttons combinations for the different operations like hard reset & boot loader?
3-I read that android can’t share internet via USB for those with no WIFI at home or office. As I knew it’s due to ad hoc issue so it's impossible to get internet via USB cable from desktop. When I plugged my DHD, I choose internet pass through and I got internet on my DHD, is it a new feature implemented in DHD only, or is it a 2.2 update that will work on other devices?
4-Winmo gives the choice to install applications on either the device or SD card. Android have nothing like this, so when I install applications, where do they go, and is there a workaround to put everything on SD card, or maybe give choice to where to install?
5-My DHD comes with an 8 GB mini SD card where there are some folders and files on it. Are they necessary to run the system, what if I replaced this card with another formatted one, what will happen, or what if I format this card?
II-System info:
1-Baseband version (is it like the radio in winmo?)
2-Kernel version (is it one kernel for the entire device? Does it updates like rom or like radio?) e.g. (kAmMa's OC&GOV&BFS Kernel - Performance and Stability. Is this a rom or just kernel that will update some parts of the rom without losing data on the device?)
3-Build number (is this the firmware?) e.g. (i have 1.32.405.3 CLxxxxxx release-keys, what does release keys means?)
4-Software number (or this is the firmware?)
III-OTA ACE with radio:
1-OTA (is it a rom, does it mean over the air, if yes what does that mean? Can we update OTA with no root?)
2-ACE
On winmo (HD2), I know HSPL will let me unlock ISPL so I can install any custom or cooked rom, languages and applications...
For android, as far as I know there is no one click solution. From what I understand to do everything in android with no restrictions u need to do the followings:
IV-How to root Desire HD install h-boot (S-Off) and Clockwork recovery?
Please identify which one is just a process that we do it once in order to unlock it, which is a boot loader run application and which one is an android application:
1-Root (is it what gives access to the root folders of the system that maybe are hidden by default or encrypted?)
2-Hboot
3-S-off (is it security off? if yes, it is security off for what? installing applications, or read write to some encrypted partitions?)
4-Clockwork (is it something necessary to do in order to install custom rom, no adds, backup and so on, or is it something totally independent and related only to unlock the speed of the CPU where you can leave it intact if you won’t play with the CPU speed?)
5-Recovery (from what I understand it seems that recovery is a system shell command like dos or more like bios for android but named as recovery, what can we do with the recovery other than recovering the device?)
6-Recovery image (is it a rom backed on the form of image and provided by developers, so we can install it directly on the device using only the recovery shell?)
V-More things to know about:
1-What is adb?
2-What is busybox?
2-What is fast boot?
3-What is eMMC write?
4-What is ext2 or ext4 (is it like the partition type of the SD card based on UNIX system? if yes, why should we change or modify this ext)
5-Rom manager (is it a desktop pc application or android device application? is it something like I can put the RUU file of the rom on my SD card and using the rom manager I can install the rom from there, nothing more nothing less?)
Click to expand...
Click to collapse
Congratulations. You win the "most questions asked in a single post" award.
Sent from my Desire HD using XDA App
That is a ridiculous amount of questions, and the thread is in completely the wrong area of the forum. I'm sure you'd find the answer to pretty much all your questions if you looked hard enough, but to answer the one about multi-touch. It is multi touch and all the games I've played from your example 'Gameloft' are multi-touch, so I don't know what you're smoking buddy, but ease off.
1. Inb4 "search".
2. Wrong forum.
3. No really, try searching. At least 30% of that is googleable.
Sent from my Desire HD using XDA App
Ok guys, thank you all for your replies, and yes I knew that a war and flames will go on here, but seriously if you think this is ridiculous or newbie or most dumb questions, do not turn the way of the thread or flame me, my intentions are to make this as a one small guide for most new androids functions, it's not a bad thing to do, in fact I will learn as much as other new users here, no one is asked to answer all those ridiculous questions, just answer what you know about, guys please take it seriously and easy, saying look harder will not help the thread, it may help me personaly, but be sure that I did a lot of search, and it will not hurt to put everything in one place, and as you can see, I answered most of the questions up to what I gathered, you can correct me about my answers, put your thoughts or not answer at all, but please be constructive here, and if you all think that i'm in the wrong forum, or asking too much, or asking ridiculous questions, please moderator feel free to do what you think is better for the forum.
Sorry guys for bothering you. Thank you for your response.
N.B.: just to be more accurate, I tried the prince of persia pre installed on the phone by the dealer, and it was not multi touch, so you cant walk and use any of the right actions at same time.
@vuedesprit: Good thread, and thanks for taking all the criticism from the more experienced users.
@all chimers chiming the "use search, wrong forum" tune: c'mon guys, there's at least 2 of us reading this thread going, it's about time all this information got consolidated into one place! The easier it is to find this information, the easier it would be for more of us to get engaged in the process and thus further development, enhancement and adoption.
While our "friendly" mod is doing his best to keep the forums clean, they're as fragmented as ever and from time-to-time, it becomes necessary to consolidate the information into a single thread. I'm sure most of you started some place too and remember the time not so long ago when it was difficult to find even the most basic info? I think by sharing your knowledge, you will gain a much better following and the platform will gain much better adoption.
My 2 cents worth anyways...I've had my DHD for 3 days now and I too am struggling to perform even the most basic tasks.
We really need a questions and answers sub forum
Fair enough, maybe my first comment was a bit rash, but I didn't mean to appear rude. I shall try to answer some questions here:
GENERAL.
1. From my own experience all games advertised as multitouch are exactly that. I don't know about the version of PoP that you have installed from carrier, but I do find that odd.
2. Hard reset is a little perverse with the new "fastboot" hibernation feature that HTC have implemented. You have to go to MENU>SETTINGS>APPLICATIONS and disable "fastboot" (this is where confusion may arise as this is not the bootloader fastboot that allows images to be flashed)!! Now when you hold down the power button and get the option to power off, you will properly power off the phone. Next if you hold "VOLUME DOWN" and "POWER" buttons you will reboot into HBoot, from here the VOLUME UP/DOWN keys navigate the menu and POWER selects menu options.
3. Not sure about this one.
4. Since the release of FROYO you can go to MENU>SETTINGS>APPLICATIONS>MANAGE APPLICATIONS then select any app and move to either SD or to phone memory.
5. The folders on the SD card are mostly generated by the phone when you first insert it. The user guide and HTC sync software are there to move onto your PC for safe keeping. If you insert a freshly formatted SD card, the phone will make fresh folders such as DCIM for pictures, etc...
SYSTEM INFO.
1. Baseband is radio software.
2. Kernel is the linux kernel that is running below Android, this can be updated separately from the main ROM, radio etc. HOWEVER CAUTION IS ADVISED AS CERTAIN KERNELS WILL NEED NEW MODULES FOR HARDWARE TO FUNCTION CORRECTLY as you will see from the wifi modules bundled with the OC kernels.
3. Build number pertains to HTC's internal software version classification (some are built specific for carriers) they are generally released via RUU (ROM Update Utility aimed at windows) or OTA (Over The Air update received on phone [again sometimes carrier specific]). Release keys pertains to the fact that the firmware has been signed by HTC (I think).
4. Software number, basically as above.
OTA ACE with Radio.
1. As Above.
2. ACE: internal HTC name for Desire HD (also reportedly known as "SPADE")
ROOT DESIRE HD ETC.
Most of what you have written is pretty much correct.
MORE THINGS TO KNOW ABOUT.
1. http://developer.android.com/guide/developing/tools/adb.html
2. http://www.busybox.net/about.html
3. http://android-dls.com/wiki/index.php?title=Fastboot
4. eMMC write basically means that you can write to the internal phone (normally protected) memory such as /SYSTEM, this is what S-OFF allows you to do whenever you want. However, the modules that allow the ENG HBoot image to be flashed are what really accomplish this in the first place so theoretically you could just run that module every time you wanted to write to /SYSTEM but that would become very tedious very quickly. I can't really explain further, as I don't have the knowledge.
5. EXT2 or EXT4 are filesystem structures just like FAT, FAT16, FAT32, NTFS, HFS+ etc, EXT4 is newer and more advanced than EXT2 and therefore is more efficient. (kinda general but you get the idea. NEWER=BETTER)
6. ROM manager, find this in the android market, it is free, you install it on your phone and with the addition of clockworkmod it gives you the ability of flashing ROMs etc. USE WITH CAUTION.
I hope that this answers or clarifies most of what you have asked or said, please feel free to cut and paste any of this info into your first post so that we can actually consolidate this.
P.S. I too am a complete android noob and this is my first android phone, I have picked this info up mainly from this forum so all credit for information goes to XDA-DEVELOPERS.COM and not me.
Cheers,
Dok
berek9999 said:
congratulations. You win the "most questions asked in a single post" award.
Sent from my desire hd using xda app
Click to expand...
Click to collapse
+1111111111^2
1-DHD should be multitouch. Then why games like Gameloft are not multitouch like on ipod or iphone?
Click to expand...
Click to collapse
an application must support multitouch and other gestures. eg, opera doesnt support multitouch (ie you cant zoom in and out) but the browser that comes with the DHD does.
2-What are the buttons combinations for the different operations like hard reset & boot loader?
Click to expand...
Click to collapse
boot loader = turn phone off. then, volume down + power on.
4-Winmo gives the choice to install applications on either the device or SD card. Android have nothing like this, so when I install applications, where do they go, and is there a workaround to put everything on SD card, or maybe give choice to where to install?
Click to expand...
Click to collapse
application must support running from /sdcard. When you install an app go to settings -> Applications -> manage applications. From here you can uninstall or move apps to the sdcard. Bear in mind if you have not rooted your phone you may not be able to uninstall some apps (eg amazon reader).
5-My DHD comes with an 8 GB mini SD card where there are some folders and files on it. Are they necessary to run the system, what if I replaced this card with another formatted one, what will happen, or what if I format this card?
Click to expand...
Click to collapse
some application data is stored on your sdcard, and apps are stored here if you have moved them by using the steps above. if you change sd cards this info is unavailable to the app but the app should still work. any settings you had need to be redone.
2-Kernel version (is it one kernel for the entire device? Does it updates like rom or like radio?) e.g. (kAmMa's OC&GOV&BFS Kernel - Performance and Stability. Is this a rom or just kernel that will update some parts of the rom without losing data on the device?)
Click to expand...
Click to collapse
the kernel is not part of a rom or the radio. It is stored in the boot partition in the emmc (where fastboot(aka hboot)/splash images/boot(kernel)/recovery/ are all stored). It is generally included with but not required by a custom rom. ie, a custom rom builder may choose to include a specific kernel with his rom but it is not mandatory.
1-OTA (is it a rom, does it mean over the air, if yes what does that mean? Can we update OTA with no root?)
Click to expand...
Click to collapse
yes, you can do OTA HTC updates. but, there are no custom (non signed) updates delivered OTA. An unrooted rom will not be able to flash non signed updates (or roms).
How to root Desire HD install h-boot (S-Off) and Clockwork recovery?[/U][/B]
Click to expand...
Click to collapse
there is a good thread here - http://forum.xda-developers.com/showthread.php?t=841076.
Please identify which one is just a process that we do it once in order to unlock it, which is a boot loader run application and which one is an android application:
1-Root (is it what gives access to the root folders of the system that maybe are hidden by default or encrypted?)
Click to expand...
Click to collapse
android application. eg, visionary+.
2-Hboot
Click to expand...
Click to collapse
hboot is also known as bootloader. it is the white screen with the skating androids when you do the volume-down + power combination when switching on your phone.
3-S-off (is it security off? if yes, it is security off for what? installing applications, or read write to some encrypted partitions?)
Click to expand...
Click to collapse
s-off stands for security off. you can check the status by doing the volume-down + power combo. At the top it will either say s-on or s-off. If you have s-on then your bootloader (hboot), boot (kernel) /system (android) and recovery (eg clockworkmod) partitions are all read only.
4-Clockwork (is it something necessary to do in order to install custom rom, no adds, backup and so on, or is it something totally independent and related only to unlock the speed of the CPU where you can leave it intact if you won’t play with the CPU speed?)
Click to expand...
Click to collapse
clock work is the recovery partition. you have 3 possible options before loading android when you do the volume-down + power on combo. hboot, then either fastboot or recovery. fastboot and recovery are both ways to flash images to your phone although through different ways (fastboot uses the fastboot command on your pc to send the image, recovery uses .zip's on your /sdcard). clockworkmod is a custom recovery image which you need to flash after achieving s-off. it's also where nandroid backups can be done. if you select recovery before doing this you will get the phone + red triangle icon. thats the stock recovery. the clockworkmod is the green menu selection one.
5-Recovery (from what I understand it seems that recovery is a system shell command like dos or more like bios for android but named as recovery, what can we do with the recovery other than recovering the device?)
Click to expand...
Click to collapse
see above.
6-Recovery image (is it a rom backed on the form of image and provided by developers, so we can install it directly on the device using only the recovery shell?)
Click to expand...
Click to collapse
clockwork mod can backup your phone's partitions (boot/userdata/system) so that if you mess up installing a rom you have a way to recover. this is known as a nandroid backup.
1-What is adb?
Click to expand...
Click to collapse
adb is android debug something. It is a way to send commands to the android operation system from your pc (either windows or linux). eg, you can run a single command, or run a shell (terminal session). it is part of the android sdk under tools.
2-What is busybox?
Click to expand...
Click to collapse
busybox is a single executable whihc runs under the android OS that provides standard linux commands (eg, ls, rm, cd) to any application. it is so that a script writer does not need to know the partiticular rom you have and then cater for it, but only that you have a certain version of busybox. eg, busybox 1.17.1 provides the same commands whether it is on a leedroid rom or a cyanogen rom.
2-What is fast boot?
Click to expand...
Click to collapse
fastboot is a way to flash images to your phone. it is accessed via hboot. you need the fastboot exe from the htc developer site. it can flash the boot (kernel), recovery (eg clockworkmod) and the radio (i think).
3-What is eMMC write?
Click to expand...
Click to collapse
the emmc is the storage device which holds hboot, fastboot, recovery, /system, /userdata and (not sure about this one) radio. when you switch on your phone the emmc is read-only due to the s-on flag being set by hboot. you need to flash the engineering hboot which does not set s-on when you switch your phone on.
4-What is ext2 or ext4 (is it like the partition type of the SD card based on UNIX system? if yes, why should we change or modify this ext)
Click to expand...
Click to collapse
ext2 and ext4 are linux file system types. eg, windows is ntfs, linux has ext2/3/4 and others.
5-Rom manager (is it a desktop pc application or android device application? is it something like I can put the RUU file of the rom on my SD card and using the rom manager I can install the rom from there, nothing more nothing less?)
Click to expand...
Click to collapse
rom manager is an android app available on the market place to help with the flashing process. it can flash recovery partitions (as long as your phone is s-off), make nandroid backups (as long as you have clockworkmod & s-off). it can also flash custom roms. it does not flash these from within the android OS (afaik) but it will reboot into (not sure on this one) the recovery partition and leaves it instructions to flash a particular rom.
This thread is amazing!!
We had a lot threads like this in the HTC Blackstone Board of pocketpc.ch....
Hope to get more threads like this in every device category....
Thumbs up
Perhaps Threadstarter can write the answers in the first post...??
50chickens said:
an application must support multitouch and other gestures. eg, opera doesnt support multitouch (ie you cant zoom in and out) but the browser that comes with the DHD does.
boot loader = turn phone off. then, volume down + power on.
application must support running from /sdcard. When you install an app go to settings -> Applications -> manage applications. From here you can uninstall or move apps to the sdcard. Bear in mind if you have not rooted your phone you may not be able to uninstall some apps (eg amazon reader).
some application data is stored on your sdcard, and apps are stored here if you have moved them by using the steps above. if you change sd cards this info is unavailable to the app but the app should still work. any settings you had need to be redone.
the kernel is not part of a rom or the radio. It is stored in the boot partition in the emmc (where fastboot(aka hboot)/splash images/boot(kernel)/recovery/ are all stored). It is generally included with but not required by a custom rom. ie, a custom rom builder may choose to include a specific kernel with his rom but it is not mandatory.
yes, you can do OTA HTC updates. but, there are no custom (non signed) updates delivered OTA. An unrooted rom will not be able to flash non signed updates (or roms).
there is a good thread here - http://forum.xda-developers.com/showthread.php?t=841076.
android application. eg, visionary+.
hboot is also known as bootloader. it is the white screen with the skating androids when you do the volume-down + power combination when switching on your phone.
s-off stands for security off. you can check the status by doing the volume-down + power combo. At the top it will either say s-on or s-off. If you have s-on then your bootloader (hboot), boot (kernel) /system (android) and recovery (eg clockworkmod) partitions are all read only.
clock work is the recovery partition. you have 3 possible options before loading android when you do the volume-down + power on combo. hboot, then either fastboot or recovery. fastboot and recovery are both ways to flash images to your phone although through different ways (fastboot uses the fastboot command on your pc to send the image, recovery uses .zip's on your /sdcard). clockworkmod is a custom recovery image which you need to flash after achieving s-off. it's also where nandroid backups can be done. if you select recovery before doing this you will get the phone + red triangle icon. thats the stock recovery. the clockworkmod is the green menu selection one.
see above.
clockwork mod can backup your phone's partitions (boot/userdata/system) so that if you mess up installing a rom you have a way to recover. this is known as a nandroid backup.
adb is android debug something. It is a way to send commands to the android operation system from your pc (either windows or linux). eg, you can run a single command, or run a shell (terminal session). it is part of the android sdk under tools.
busybox is a single executable whihc runs under the android OS that provides standard linux commands (eg, ls, rm, cd) to any application. it is so that a script writer does not need to know the partiticular rom you have and then cater for it, but only that you have a certain version of busybox. eg, busybox 1.17.1 provides the same commands whether it is on a leedroid rom or a cyanogen rom.
fastboot is a way to flash images to your phone. it is accessed via hboot. you need the fastboot exe from the htc developer site. it can flash the boot (kernel), recovery (eg clockworkmod) and the radio (i think).
the emmc is the storage device which holds hboot, fastboot, recovery, /system, /userdata and (not sure about this one) radio. when you switch on your phone the emmc is read-only due to the s-on flag being set by hboot. you need to flash the engineering hboot which does not set s-on when you switch your phone on.
ext2 and ext4 are linux file system types. eg, windows is ntfs, linux has ext2/3/4 and others.
rom manager is an android app available on the market place to help with the flashing process. it can flash recovery partitions (as long as your phone is s-off), make nandroid backups (as long as you have clockworkmod & s-off). it can also flash custom roms. it does not flash these from within the android OS (afaik) but it will reboot into (not sure on this one) the recovery partition and leaves it instructions to flash a particular rom.
Click to expand...
Click to collapse
Thank you very much.
Hello xda, in accordance with the signup video I have scoured the earth looking for an answer. However I'm not sure how much necro posting is frowned upon here so I thought it would be safer to just start a new thread.
I have an HTC Desire HD from Telus(for use on the Rogers network). I am in the process of rooting it but have encountered a problem. I can gain temporary root on the terminal emulator(Because the $ turns to #) however when attempting to run clockwork flash clockworkmod recovery I get the error "An error occurred while attempting to run privileged commands!"
I get the same error when attempting the "Fix Permissions" so I'm currently at a loss of what to do.
I have the ninja superuser icon in the apps menu however when I open it the screen is blank. I am unsure if this is how it is supposed to be or not. I have seen several references to a permission box that pops up during some of the steps but I haven't seen that at all.
I've tried four separate methods, the last of which coming from this thread http://forum.xda-developers.com/showthread.php?t=954997
I am currently at step B.d which involves running the S-OFF tool and Easy Radio OFF tool. But still clockwork will not flash a backup, and when I restart the phone I can not get super user to work on the terminal (ie by typing su) and must use the rage method to regain temporary root.
Also, I don't know if this is related or not, but when I restart the phone and attempt to boot in recovery mode, the volume buttons don't allow me to select other options, and instead the phone just forces me to reboot normally.
Some more facts:
model HTC Desire HD A9191
Build # 1.32.405.6
Android 2.2
Anymore info I'm probably forgetting just ask away!
So my question is: Can anyone identify what the issue is?
Thanks much for taking the time to read my question.
Does visionary not work for you?
I've seen that alot of success has been gained by doing temp root and perm root through it?
It does sound like the rage method might not be working for you from what I can tell..
I do want to check all the steps you followed before where fine?
Sent from outer space on my DHD running beatmod gingersense v1.3
Visionary was how I rooted mine. Worth a try if you havent tried it: http://android.modaco.com/content/software/320350/19-nov-r14-visionary-one-click-root/
Thanks for the visionary suggestion, but Visionary still isn't working :/
Has visionary been tested with the Telus Desire? I heard there was a difference. What happens when I attempt to temproot is it moves to a blank screen then goes back to the menu.
When I used visionary on 1.32 it did not always work first try ... generally always worked after 2 runs. then used it to perm root
It works. You do not have Telus software in your phone anymore.
Sent from my Desire HD using Tapatalk
Try my method (I made it because the methods I found for my Telus desire HD were flaky at best and only got temproots from it.)
Since you already flashed to 1.32 start at step 2
If you want to go gingerbread, dl the 2.36.405 ruu and use that and your pc to put 2.3.3 on it (dont worry, it works fine, i was using it since it came out and built a rom based off that, kingdom, and pyramid roms for my own sense 3 rom) and use the gingerbreak method.
http://driphter.com/index.php?topic=3867.0
Still haven't managed to get root. JSLEnterprises my antivirus won't let me download your file :/
I'm at a loss for what to do.
lemonpartyz said:
Still haven't managed to get root. JSLEnterprises my antivirus won't let me download your file :/
I'm at a loss for what to do.
Click to expand...
Click to collapse
Disable your Antivirus (Avast say's its malicious), Norton or F-Prot says its clean.
and Internet Explorer 9 says its not trustworthy (because there's .bat files in the zip), Firefox says its fine.
There is no malicious code in the zip, you can edit each individual batch file in the Resource folder to see the code. Its very simple and basic.
I disabled my antivirus, but when I run Install Visionary nothing happens. The CMD window opens and says it has been succesfuly installed but nothing has been installed, and nothing appeared in the app menu.
Edit: I went into the resource folder and then followed the steps from there and everything worked, except I still don't have the # symbol in terminal (even when entering "su") and ROM manager still gives me the same error.
lemonpartyz said:
I disabled my antivirus, but when I run Install Visionary nothing happens. The CMD window opens and says it has been succesfuly installed but nothing has been installed, and nothing appeared in the app menu.
Click to expand...
Click to collapse
go into the resource folder, edit the visionary install batch in notepad, delete the "cls" line, save and exit
rerun it with the phone attached. See if it truly installed successfully.
lemonpartyz said:
I disabled my antivirus, but when I run Install Visionary nothing happens. The CMD window opens and says it has been succesfuly installed but nothing has been installed, and nothing appeared in the app menu.
Edit: I went into the resource folder and then followed the steps from there and everything worked, except I still don't have the # symbol in terminal (even when entering "su") and ROM manager still gives me the same error.
Click to expand...
Click to collapse
you dont need to use the termial in my method.
Once visionary is installed, and you run it, and everything is done exactly whats described in my 9 easy steps thread (along with outcomes along the way), then you should be perm rooted, with s-off and eng-off with supercid.
I managed to install visionary with your method, however when running Eng-S I encountered the error "Bootloader corrupt, DO NOT REBOOT! Seek help from XDA!"
Help?
Edit: Followed the advice here http://forum.xda-developers.com/showthread.php?p=14936635 and s-off worked properly this time. Hopefully my DHD won't brick on reboot. Could super user be the problem? it never asks me for permissions or anything, all I have is an icon and a blank screen when i open the app.
Edit2: Rom manager took three attempts to install correctly. Still the same result "An error occurred while attempting to run privileged commands!"
FML
lemonpartyz said:
I managed to install visionary with your method, however when running Eng-S I encountered the error "Bootloader corrupt, DO NOT REBOOT! Seek help from XDA!"
Help?
Edit: Followed the advice here http://forum.xda-developers.com/showthread.php?p=14936635 and s-off worked properly this time. Hopefully my DHD won't brick on reboot. Could super user be the problem? it never asks me for permissions or anything, all I have is an icon and a blank screen when i open the app.
Edit2: Rom manager took three attempts to install correctly. Still the same result "An error occurred while attempting to run privileged commands!"
FML
Click to expand...
Click to collapse
looks like the superuser application isnt running properly.
I would use the 1.32 ruu (not the pd98img.zip off the sd) and then from a fresh install (without resoring any data other than google account to visit the market)
run through the visionary, s-off tool, eng-off tool, and then reboot again, then install rom manager from the market, run it, it should ask you for permission and may hang for a second, and then say you have about 5 seconds to allow root permissions.
Then install rom's away. if you're not into making seperate rom specific app folders on your sd card, google JSL Er3BuS. its a sense 3 rom without the extra scripts.
How do I install the 1.32 RUU if I can't install it from the SD card?
Thanks!
lemonpartyz said:
How do I install the 1.32 RUU if I can't install it from the SD card?
Thanks!
Click to expand...
Click to collapse
It is very easy mate,
1. Download the RUU of your choice from http://shipped-roms.com/index.php?category=android&model=Ace
2. Put your phone in charge mode only with USB debug on.
3. Make sure you have HTC Sync installed on your PC, and close HTC Sync application from your system bar in windows (make sure that HTC Sync is not running as all you need is the driver)
4. Right click on the RUU file and select "Run as Administrator"
5. Connect your DHD by the USB cable to your PC.
6. Click some boxed and "next"s.
7. Waiting!
8. Profit!
I tried following the steps here http://forum.xda-developers.com/showthread.php?t=841890
But got the error "ERROR [120]: Low MAIN BATTERY POWER. When the battery is above 30%.
This is getting ridiculous lol
I'm sorry I'm such a bother.
naailalzuhir said:
It is very easy mate,
1. Download the RUU of your choice from http://shipped-roms.com/index.php?category=android&model=Ace
2. Put your phone in charge mode only with USB debug on.
3. Make sure you have HTC Sync installed on your PC, and close HTC Sync application from your system bar in windows (make sure that HTC Sync is not running as all you need is the driver)
4. Right click on the RUU file and select "Run as Administrator"
5. Connect your DHD by the USB cable to your PC.
6. Click some boxed and "next"s.
7. Waiting!
8. Profit!
Click to expand...
Click to collapse
Tried this, now the update process has taken 45 minutes.
Well, it took 5 hours to finish, but finish it finally did. Rom manager installed no problem, flashed no problem and I am in the process of installing cryogen. Thanks everyone for their help and kind words.
Fingers crossed cryogen works.
I'm going away for the weekend, but when I come back I'll update this thread with the full details of what went down so hopefully someone will be helped by my many many hours spent raging.
-Lemonpartyz
lemonpartyz said:
Well, it took 5 hours to finish, but finish it finally did. Rom manager installed no problem, flashed no problem and I am in the process of installing cryogen. Thanks everyone for their help.
Click to expand...
Click to collapse
Glad its sorted for you , and hoping it status that way...enjoy your custom roms setting your phone free
Look forward to your post letting us know how its going.
Sent from outer space on my DHD running beatmod gingersense v1.3
Well after doing a tutorial pretty easy to understand for the Htc evo 3d, and after my one x rootear achieved, we will develop a very easy to understand tutorial with the necessary files to do so. I guess after the working day I'll get to work. I just ask a little patience. Embrace them all and continue to help in this glorious community.
Well what is debt prmetido so here I leave as rootear in simple steps your one x.
We have installed HTC sync.
For starters you have to make the release of the bootloader:
[COLOR=STEP 1[/COLOR]: Using HTCDev (http://htcdev.com/) on that page choose unlock boot loader, then we choose the device and select the last option (other). Then everything is simple and we will guide you to secure the release of bootloader. So far we have done the most complex, remember that throughout this process have made the folder called Android you should follow the path of the disk c, I've put in program files (this folder with the corresponding three files and the compressed my deputy in this tutorial under the name android).
[COLOR=STEP 2[/COLOR]: Open the folder repeat android that must be placed on disk c running as a result: computer / c / android. In this folder at this time put a file named: "r1-MoDaCo-recovery-clockwork-touch-endeavoru" (I'll attach the end so they can download as zip but must extract the file and put in the folder, repeat do not put the android zip but its content.)
[COLOR=STEP 3[/COLOR]: Now we should just turn off the phone and while the volume is kept down, enter it and click on bootloader on fastboot, which must be red, USB cable now connect our next one x fastboot also should appear in red USB. Open the system and put CMD cd \ android, android will thus \ after the bar we must copy the following "fastboot flash recovery-MoDaCo r1-recovery-clockwork-touch-endeavoru.img" without quotes and we enter. Our phone already has the recovery but now we must make the root
STEP 4: Within one x sd of our going to put a file attached to them also and that we should run from the recovery and is called "CWN-SuperSU-v0.87". Then turn off the switch on again the phone down with volume and power, the option selected this recovery and power to enter recovery and drive to install zip from sd card, power and will give you another option choose sd card and power. Here you see a series of folders must remember that we have the arhivo in question, remember? good as you remember them "CWN-SuperSU-v0.87", I have created a folder called android rom and then put all the files that run for recovery, only a recommendation, we must select the file and run it through Power. Once installed we have concluded and we have our terminal ROOTEADO AND RECOVERY.
A big thanks to the people of MoDaCo (http://android.modaco.com/topic/3530...tock-download/), I have simply tried to get a simple explanation and understandable even for a beginner like me!
Enjoy it, I've tried the roms Leedroid and revolution and everything is perfect, I am left with the revolution of performance.
Hug to everyone and ask them to stop criticism and doubts to polish them.
Attachments
I think you beleive that biggest text size can also help somebody
I don't think it's a good idea to attach Paul's recovery here because he's getting good traffic from XDA from Root and Recovery thread but if you attach it I think it will drop.
Also this recovery is now obsolete...
OK, but?
You could tell me an easier way. I tried Tadas roms and have not had any problems. I'd love to detail an easy and effective way. Thank you!
There are already a couple of tutorials on doing this in this form.
So, thread closed
So, I decided to write this guide here as I couldn't find a complete one and had to jump from thread to thread (and sometimes even the sub-forum) for finding the answer.
First I wrote it in my blog and I decided to post it here. Maybe some steps are vague in details but I'm planning to detail it even more (remember, I wrote it in my personal blog first). So, here it is:
AIO LG Optimus Me P350 Guide
Some Personal History
My experience with Android. UF! Where to start? So, I got my phone from the United States. You have no idea how wonderful it was to have the phone in my hands. Anxiety and curiosity. For some reason I always read that the first thing anyone does is root the phone and then continue doing everyday activities that do not require root, so I tried to live without rooting the phone, but I couldn’t wait for the week to go by. I had to get the best! Small problems, fixes and updates. And since I have my phone on sale, I publish this step by step guide to modify it and not die trying.
Tech Specs
Let’s start from the beginning, know the phone. Mid/low-range phone created by LG for those in a short budget but want to have a good Android experience. It has a 600 MHz processor, 256 MB RAM and ROM capacity of 512 (140 MB available for applications and data). 2.8 inch capacitive screen, 240 × 320 screen resolution. Wi-Fi b/g wireless connection, Bluetooth 2.1 with EDR, and USB 2.0 up to 480 Mbit/s. 3.1 MP camera (no flash) and FM Radio. Not bad for a basic device. Complete specifications can be found here. Enough for a casual user. But if you’re not a casual user (hence a XDA member), read on.
First of all, everything you do on the phone number is on your own. You yourself are responsible for what you do, not do, stop doing, fail, fail to read and/or shortcut you may have taken. These steps are the ones that worked for me. I am not responsible if the phone dies in the process, the cat bites the cable in the middle process, the heavens begins to fall, the 3rd world war starts or if the neighbor has a heart attack … You’ll be calling 911 afterwards… You’ve been warned!
USB Debugging
The first thing you have to learn is to turn on USB debugging. Here is a guide how to do it (If you wanna see a pictorial guide). But essentially you have to go to Settings > Application > Development and check where it says USB Debugging. Pretty easy. What is this good for? Well, for starters. modify the phone however we see fit. But most important USB Debugging allows the phone to communicate verbosely with PC with the Android SDK installed. More on this later.
KDZ Updater
KDZ Updater is an application used by LG for flashing official operating systems themselves. How did this application saw daylight outside the company, I don’t know very well, but apparently a leak appeared on LG India, but not sure. In any case, this application is our last line of salvation and the main tool for our little friend.
To install official KDZs must follow these steps:
Install the updated drivers by following the steps listed on this page.
Connect the phone with USB Debugging activated
IMPORTANT: Disable the Virtual USB Modem device from Windows Device Manager. Omit this step and the device may brick in the upgrade process.
Run the application in Administrator mode (only required on Windows Vista / 7).
In the Type drop-down list select 3GQCT and in PhoneMode, DIAG. Where it says Version, will appear the version that is installed on the phone.
Select the KDZ file to install by clicking on the button with the folder icon. Preferably save the file KDZ in the root of the hard drive as there will be little chance for error when reading the file.
Press the button “Launch Software Update”. The phone will reboot into Emergency Mode. This is normal.
Pray all you know and go for a cup of tea. The process takes about 8 to 10 minutes.
If all went well, the phone will turn off and the program displays a line that says = FINISHED =.
To start, first go into recovery mode by pressing the following buttons: Vol- & Power. This will make any old or unnecessary information to be removed. The phone will reboot into the system normally.
Original Thread
Root (Gingerbreak and SuperOneClick)
Ok, what we came here for. Rooting the phone. How do I do? It’s scary! Says who?! Lets start with the choices we have. Ok, we have the phone, but we have not updated anything, How do I get root? Gingerbreak comes on the scene. Pretty simple process: download, Enable USB Debugging, run, press Root, wait for the restart, confirm. Simple, right? Also read the instructions and warning on the link above in case something I overlooked, but that basically is the process. By the way, install Busybox, very important for future processes.
Stop, stop, stop … And if I upgraded the phone? Gingerbreak seems not to work! What do I do?! Mainly, DO NOT PANIC! First things first. Go to “About phone” and see that version it says; something different than 2.2? Cool, no problem. SuperOneClick comes on scene. Download the application, unzip. I assume you already installed the drivers, right? Otherwise, do it and come back when you have done so. Ready? Continue. Turn on USB Debugging and connect the phone to the computer. Execute the application and press the button that says “Root”. Need more information? Here is a video explaining step by step (its in spanish, but graphics needs no language) and if the antivirus gets all paranoid, read the explanation here.
Recovery (Amon-RA and CWM)
Ok, moving on. Just as clarification: From this step on, the phone should already be rooted. Otherwise, you will mourn at the very end because the phone will brick and you’ll end with a very good and expensive paperweight. What is a Recovery? Here the answer.
This is essential before changing the insides of the phone and a step that I believe needs to be forever linked to rooting process. Why? Simple! Installing a Recovery allows full system backup and restore if something goes wrong. That linking to rooting process? Because if you install a root application, modify the system, and damage the system, it can be restored to a previous time and we’re all happy campers. See?
So this is where we get our hands dirty. Initially, I ask again, have you installed the drivers? (From this point on I shouldn’t ask) Have you rooted the phone? Responded twice yes? Perfect. Now, download the Android SDK or only the .zip attached here (unzip preferably in C:\ADB\) to continue this process. Also download the Recovery that you will install, we have Amon-RA and ClockworkMod (CWM) v5, v5 touch, and v6, extract the recovery.img file to the folder where adb.exe is (If you used the SDK installer, should be at C:\Program Files\Android\android-sdk\platform-tools\; if you used the .zip, and extracted as recommended, C:\ADB\). Which to choose? My recommendation, CWM v5 (either one). Connect the phone to the computer in with USB Debugging activated. By the way, how do you feel using command line in Windows? Moving on…
Open a command window, go to where adb.exe is and run the following commands:
Code:
adb push recovery.img /sdcard/
adb push flash_image /sdcard/
With this we have copied what we need into the phone’s SD card. Just to clarify: 1) the flash_image file can only be found in the recovery Amon-RA zip (not sure if it is generic or modified exclusively for the P350, then I’d rather play it safe) and 2) CWM recovery v5 and v5 touch files come in zip-installable, but you can open the file and use recovery.img in it. In CWM v6 there is an installable zip and another to follow this same process. Lets continue…
Code:
adb shell
$ su
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
# cat /sdcard/flash_image > /system/bin/flash_image
# chmod 755 /system/bin/flash_image
# sync
Up to this we have only prepared the area to install the Recovery. It it recommended to reboot the phone in this step, in case you run out of virtual memory but is not really so necessary (If you see an error message, then reboot). That’s yours decision. Continue…
Code:
adb shell
$ su
# flash_image recovery /sdcard/recovery.img
# sync
To confirm that everything is installed without issues it must happen one thing and do another thing. What must happen is when you execute the flash_image command, no errors should appear, if otherwise reboot and repeat the last block of commands. What must be done is execute the command reboot recovery and if everything is alright, you should go into Recovery menu, if not then all the information has been erased and back to square 1 (it happened to me the first time).
Kernel
Just for safety: are drivers installed? Root acquired? Recovery installed? Already made a backup of the ROM in use at the moment (so far should be the LG ROM)? Do it!!
So, what’s a kernel? Here’s the answer. What choices do we have? Well not too many, it depends. Are we still on the LG Stock ROM or a Froyo-based ROM (oh, getting ahead aren’t we?!)? Well, the truth, with this ROMs there are not many: Team Pecan Kernel would be my recommendation, RoQ Kernel which also works quite well. CM7 ROM or any other Gingerbread-based? Ron's RM CAF Kernel (updated weekly), pax0r kernel (discontinued), Vivek Kernel (also discontinued but higher than pax0r). Read how to use Recovery for the installation of installable zip files from Recovery. This is also applicable for the installation of ROMs.
ROM
Still with me? Still no cardiac arrest? Relax, breathe! As we reach the last modification process of the phone. After surviving this, you will have the full capacity to recover the phone from any eventuality. Dictionary, which is a ROM? Here the answer.
ROM, What options do we have? Well, although it may seems, there are many options to choose from! We have some created from source code, based-on and others that have been “ported” to work with the device. Among those created from the source we have: CyanogenMod 7.2, Pure CM Invasion and CyanogenMod 9 (Work in Progress, not quite stable), based-on: Androm x4.2 (CM7) Arc XP (CM7), Gingerbread Optimus UI (CM7) Gingerblur (CM7) and MIUI v4 (based on CM7, Arc XP with a theme very close to the real MIUI, Japanese ROM). Ports: JoyOS, ICS (Discontinued unstable), BeautySense (Decent and functional).
Further Development/Tweaks
At the moment a new tool has been released called LG P350 Pecan Toolkit, developed by antdking. Its in early development and so far it roots, unroots and installs recovery. Saves some the hassle of the command line but if we haven’t gone through all the problems and commands, what have we learned? Anyways, here’s the original thread where you can follow the development and post ideas or bugs.
If you wanna go all-in into ROM cracking and research, we have also the LGExtract tool, which unpacks the KDZ file into bits and pieces. DZ Extract Tool extracts the files within a DZ package very much into source code. I've used these tools but as my experience with coding and android development is very close to none all I've done is extract the files and read them. Antdking reminded me of a simple yet powerful tool to continue decompiling the LG filesystem called unyaffsmbn. I came across it when we were trying to decompile baseband (amss.mbn) for CM9 without success, just lo later know that the tool just decompiled system.mbn. Oh well. Antdking compiled unyaffsmbn into a nice little tool ready to work, here it is.
The volume on this phone, as many may know, is low. But there is a way to elevate it. Execute the phone app and press: 3845#*350#. This will bring up a Hidden Menu. Go to: Device Test > Sound Test > Audio CAL Tool > Subsystem Calibration. In the Gain Type dropdown list, select Speaker Gain. Set Data textbox gets focus, input the number 90 and press OK button. In Gain Type, select Input1 Gain, and we press Ok button again. Exit the Hidden Menu. This will elevate the speaker volume but just temporary, it will be restored to default values when rebooted. So either don't reboot or repeat this process everytime you reboot.
And that would be all. Happy hacking!
Great kudos to the real developers here:
drapalyuk: For the first ever recovery for P350, Amon-RA
pax0r: Started it all, Kernel, ROM
ron gokhle: ROMs, Kernel and Recovery builds
vivekkalady: Kernel, Touch Recovery, first ICS port, and some other fix work
nikhil4186: For the KDZ Guide (although written originally for LG P500
antdking: For a great-to-be toolkit
great guide good job
Nicely written.Its a really good guide for all those who are new to P-350 and I believe that it will help them to learn some of the basic stuff.Well done!
to go on the end of this guide, how to extract the files out of the system.mbn to get the system files
http://db.tt/7VruqEzr
it returns similar files to what you find in a rom
I did not make unyaffsmbn
I made the tool that uses unyaffsmbn
enjoy
antdking said:
to go on the end of this guide, how to extract the files out of the system.mbn to get the system files
http://db.tt/7VruqEzr
it returns similar files to what you find in a rom
I did not make unyaffsmbn
I made the tool that uses unyaffsmbn
enjoy
Click to expand...
Click to collapse
got the PM and you reminded me of that tool (I remembder I came across it when we were trying to crack amss.mbn for CM9)... I'll post the original thread and the tool you just mentioned...
Updated adding unyaffsmbn tool... Thanks antdking!
Added Volume tweak for speaker to sound harder.
Added P350 (and guide) to XDA wiki. http://forum.xda-developers.com/wiki/LG_Optimus_Me
dbarrera said:
Added P350 (and guide) to XDA wiki. http://forum.xda-developers.com/wiki/LG_Optimus_Me
Click to expand...
Click to collapse
thanks man :good::good::good::good::good::good::good::good:
Guys We have got Official Support From XDA Please Move This Thread To Our Device Section
Very good!!!
I placed some problem I am having, just in case you have time an patience for this case.
Tks
http://forum.xda-developers.com/showthread.php?t=2461183
Great Guide Man! Thanks a lot.
I have been true some web sites and have not found a solution for this problem. I have a HTC Desire HD, sow called HTC ACE, I got it from Orange UK, Android Version 2.3.5, HTC Sence Version 3.0 With Software 3.13.61.5, and I would be pleased to debrand this machine, but always come to the same decision I cannot duet yet, I would like to receive some suggestions on how to debrand it, I will try everything and after that right everything I have done until be successful, thank's
PauloMHAlmeida said:
I have been true some web sites and have not found a solution for this problem. I have a HTC Desire HD, sow called HTC ACE, I got it from Orange UK, Android Version 2.3.5, HTC Sence Version 3.0 With Software 3.13.61.5, and I would be pleased to debrand this machine, but always come to the same decision I cannot duet yet, I would like to receive some suggestions on how to debrand it, I will try everything and after that right everything I have done until be successful, thank's
Click to expand...
Click to collapse
Before you do anything — Make a backup
Don't forget to back up your data. If you have synced the device with a Google account, then the contacts, calendar, Gmail, & select other Google-related data will not be lost and will come back after the next sync. However, you should backup anything you want to keep that is not stored on the SD card:
SMS/MMS messages,
Call Log,
Bookmarks,
Applications; use Titanium Backup or the Astro File Manager, for example,
Any application data not on the SD card.
It would also be a good idea to backup everything stored on the SD card in the rare case the SD card must be formatted to resolve any major problems.
MyBackup Root, SMS Backup & Restore, and Call Backup & Restore are all free applications that can assist with backing up your data.
Downgrade to an exploitable Firmware
AT&T Inspire 4G: Firmware Downgrade: Froyo, Gingerbread
HTC Desire HD: Firmware Downgrade: Froyo, Gingerbread
Rooting the HTC Ace
WARNING: ROOTING THE HTC ACE WILL VOID THE WARRANTY.
Before you begin, if VISIONary is installed on the HTC Ace, uninstall it before continuing.
You will need ADB on the computer to root the HTC Ace and to flash the necessary files for radio S-OFF. Follow the Android SDK guide, to get the ADB shell on the computer.
Download busybox, the ClockworkMod Recovery, the Engineering HBoot, gfree 0.7, psneuter, root_psn, Superuser package:
busybox: Download
md5: 25c5db694c987995909cc3166d4f01b0
ClockworkMod Recovery: Download
md5: 072a643b0aba983a4b9994db0e113c5e
Engineering HBoot: Download
md5: b2c8834905bfa2349f5223077493140a
gfree 0.9: Download
md5: 2dd45594b1ecb084401d428432f87010
psneuter: Download
md5: 89c2dec8d72d87b4c669f44dd31c8d17
root_psn: Download
md5: c8fe38ef55eb8951def9ff17b2eb99c1
Superuser package: Download
md5: 43d9a40b63e916635d5ad7ca32433fab
Unzip the zip files and copy the contents to the same folder as adb (the /platform-tools folder within the Android SDK folder).
Connect the HTC Ace to the computer via USB.
Make sure USB debugging is enabled on the HTC Ace by checking Settings » Applications » Development » USB debugging.
On the computer, open terminal and run the following commands:
adb push busybox /data/local/tmp/
adb push gfree /data/local/tmp/
adb push hboot-eng.img /data/local/tmp/
adb push psneuter /data/local/tmp/
adb push recovery-clockwork-5.0.2.3-ace.img /data/local/tmp/recovery.img
adb push root_psn /data/local/tmp/
adb push su /sdcard/
adb push Superuser.apk /sdcard/
adb shell
chmod 755 /data/local/tmp/*
/data/local/tmp/psneuter
NOTE: You will drop out of the shell after this command. Restart the shell using:
adb shell
cd /data/local/tmp
./gfree -f -b hboot-eng.img -y recovery.img
As it is very important that the hboot was installed correctly gfree calculates md5sums of the partition. It will calculate the following 3 checksums
md5sum #1 - checksum of partition 18 before the installation
md5sum #2 - checksum of the hboot image that should be installed
md5sum #3 - checksum of partition 18 after the installation
The messages that you what to see are either/or
md5sum #1 == md5sum #2 - the hboot image is already installed -> skipping installation
md5sum #3 == md5sum #2 - the hboot image was successfully installed -> OK!
If you get a different error message you should run for help at then DO NOT REBOOT and join #G2Root on Freenode for further help.
If gfree worked correctly continue with:
./root_psn
sync
reboot
The HTC Ace is now rooted with S-OFF, the Engineering HBoot & the ClockworkMod Recovery. Continue to the next section.
Flashing CyanogenMod
If the {{{device}}} has been rooted, unlocked, etc. through steps other than the method described above or running a custom ROM other than CyanogenMod and you are having issues flashing or booting CyanogenMod, it is recommended the {{{device}}} be returned to stock & start over with the full instructions provided above.
Method via Recovery
Download the [[Devices Overview#{{{device}}}|latest version]] of CyanogenMod.
Optional: Download the Google Apps for the device.
Place the CyanogenMod update.zip file on the root of the SD card.
Optional: Place the Google Apps .zip on the root of the SD card also.
Boot into the ClockworkMod Recovery.
Once the device boots into the ClockworkMod Recovery, use the side volume buttons to move around, and either the power button or the trackball to select.
Optional: Select backup and restore to create a backup of current installation on the {{{device}}}.
Select the option to Wipe data/factory reset.
Then select the option to Wipe cache partition.
Select Install zip from sdcard.
Select Choose zip from sdcard.
Select the CyanogenMod update.zip.
Optional: Install the Google Apps by performing steps 7 - 9 again and choosing the Google Apps update.zip.
Once the installation has finished, select +++++Go Back+++++ to get back to the main menu, and select the Reboot system now option. The {{{device}}} should now boot into CyanogenMod.
Method via ROM Manager
Launch RomManager.
Optional: Choose the first option in the app, Flash ClockworkMod Recovery to update to the latest version.
Select the Download ROM option from the main menu in the ROM Manager.
Select the CyanogenMod option, and then choose the latest version of CyanogenMod from the menu.
Optional: When you select the latest version of CyanogenMod, check the Google Apps option.
Once the ROM is finished downloading, it asks if you would like to Backup Existing ROM and Wipe Data and Cache.
If Superuser prompts for root permissions check to Remember and then Allow.
The {{{device}}} will now reboot into the recovery, wipe data and cache, and then install CyanogenMod. When it's finished installing it will reboot into CyanogenMod.
:crying:
I have try that was another fail lol...
PauloMHAlmeida said:
I have been true some web sites and have not found a solution for this problem. I have a HTC Desire HD, sow called HTC ACE, I got it from Orange UK, Android Version 2.3.5, HTC Sence Version 3.0 With Software 3.13.61.5, and I would be pleased to debrand this machine, but always come to the same decision I cannot duet yet, I would like to receive some suggestions on how to debrand it, I will try everything and after that right everything I have done until be successful, thank's
Click to expand...
Click to collapse
GUIDE] Downgrade from 3.13 (Sense 3.0) roms
This guide is for phones shipped with froyo and updated to the 3.x firmware! For phones shipped with gingerbread (even the lower versions) please read attn1's posts in this thread!
With the Sense 3.0 upgrade HTC patched against fre3vo, so we can no longer temproot to use misc_version on that firmware. Lucky us, a new exploit was issued @rootzwiki. This exploit was tested at #g2root (freenode) and was able to temproot a 3.13.161.3 firmware version.
The usual disclaimer applies: Everything you do is your responsibility, no one can be held accountable for the state you put yourself and/or your phone into.
If you meet troubles search for help at IRC: freenode, #g2root
make sure your phone is in 'charge only' mode and the 'fast boot' feature is turned off.
What you need:
tacoroot
misc_version NOTE: you need THAT version of misc_version. Earlier versions would not work.
flashgc for a goldcard
1.32 PD98IMG.zip
put all files in your platform-tools directory (unzip misc_version and tacoroot.sh)
Code:
adb push tacoroot.sh /data/local/tmp/tacoroot
adb push misc_version /data/local/tmp/
adb push flashgc /data/local/tmp/
adb push PD98IMG.zip /sdcard/
NOTE: the last command will take a long time
After all files are pushed you have to run tacoroot:
Code:
adb shell
chmod 755 /data/local/tmp/*
/data/local/tmp/tacoroot --setup
This command will reboot the phone to recovery. Once it is done, use vol up/power then choose 'reboot' to reboot the phone. After it boots (it will bootloop, that's expected):
Code:
adb shell
/data/local/tmp/tacoroot --root
this command will kick you out of adb shell, so we need to return there and see the # sign of root access, after which we can change the main version and create a goldcard:
Code:
adb shell
cd /data/local/tmp
./misc_version -s 1.00.000.0
./flashgc
./tacoroot --undo
After these commands are done, the phone should get rebooted by tacoroot. After it boots, boot to bootloader to flash the 1.32 firmware:
Code:
adb reboot bootloader
Once in bootloader, use the vol buttons to go to 'bootloader' and the power button to execute. The rom will flash. Enjoy!
Credits:
the tacoroot team
skorgon for flashgc
Donate to RevSkills and EFF!
fail againnnnnn:crying:
PauloMHAlmeida said:
I have been true some web sites and have not found a solution for this problem. I have a HTC Desire HD, sow called HTC ACE, I got it from Orange UK, Android Version 2.3.5, HTC Sence Version 3.0 With Software 3.13.61.5, and I would be pleased to debrand this machine, but always come to the same decision I cannot duet yet, I would like to receive some suggestions on how to debrand it, I will try everything and after that right everything I have done until be successful, thank's
Click to expand...
Click to collapse
use this
http://forum.xda-developers.com/showthread.php?t=1377119
For the last few days I have try new software
Z4root No chance another fail...
for debrand use latest RUU, WWE version.. no branded
for rooting use advanced ace hack kit
The Advanced Ace Hack Kit – for HTC Desire HD and HTC Inspire
failed..........
new Advanced Ace Hack Kit system
I just found a new chance and I'm trying it
with new Advanced Ace Hack Kit system, I found it at http://tau.shadowchild.nl/attn1/?p=74
was Posted on July 26, 2012
The Advanced Ace Hack Kit – for HTC Desire HD and HTC Inspire
AAHK will work on Inspires on AT&T’s latest ROM, 3.20.502.52 only after following the steps outlined here: http://tau.shadowchild.nl/attn1/?p=88 .
Warnings:
If your PC environment is not ready to run this kit, there is a good chance your device will not boot properly until you fix your PC or switch to another and re-run the hack kit from the partial boot. READ THIS ENTIRE POST and READ THE EFFEN MANUAL! There is no substitute for READING for COMPREHENSION
Do NOT use earlier versions Ace Hack Kit (12.x and lower) on Inspire or DHD devices shipped with Gingerbread.
Do NOT attempt to downgrade a Inspire or DHD shipped with Gingerbread with a Froyo RUU.
Do NOT attempt to install earlier ENG HBOOTs on these models. AAHK now has Hboots that safely support fastboot image flashing.
Doing this WILL severely degrade bootloader performance on Inspires and DHDs and causes issues trying to install RUUs. In other words, it WILL jam you up. (Note: Issue confirmed on later DHDs – ignore at your own risk).
Sense 3, including those with RELOCKED HTC BOOTLOADERS (NOTE: NOT UNLOCKED – MUST BE LOCKED OR RELOCKED) is auto-detected in hack step. Option is given to download a GB RUU and downgrade or abort. This WILL wipe data.
#include <std_disclaimer.h>
/*
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because you can’t tether. Please
do some research if you have any concerns about features included in this
TOOL before running it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
*/
(Disclaimer borrowed heavily from cyanogenmod)
Features:
COMPLETELY INTEGRATED/INVISIBLE GOLD CARD PROCESS
Custom AAHK Bootloaders support popular ENG S-OFF functions for both Sense 2 and Sense 3 partition layouts
Only ONE menu step – HACK ACE
No ROM downgrade required (only radio/kernel) for devices not running sense 3
The original ROM is retained (except when downgrade from Sense3-GB is required)
No wiping data for devices not running sense 3
Rom is fully functional (yes, inc wifi)
Fully rooted with insecure boot image (supports adb remount for rw system)
Busybox manager app installed
Radio S-Off, superCid & carrier sim unlock
Correct Radio is automagically restored for HSPA+ operation
Clockworkmod Recovery included
All known Inspire/DHD builds supported
Easy return to stock for SOME builds (See the Effen Manual – not all carrier RUUs are available)
Notes:
Please do NOT run the hack step if you are already S-OFF AND are running a custom ROM. It’s pointless, and while it won’t brick you, you can get jammed up a bit. This is for stock devices only.
You MUST read the ENTIRE EFFEN MANUAL in order to run the hack kit.
Do NOT try to run this from a VM – particularly VirtualBox. You WILL get jammed up and may wind up flashing an RUU to recover, losing data in the process.
After kernel downgrade – video is lost on boot – this is okay as adb is working and can be used to finish the process. If the process fails, it can be restarted once the PC environment is corrected. When the process completes successfully, everything is restored and fully working.
Youtube videos are neat demos, but they make poor guides. READ THE EFFEN MANUAL. “There is no substitute for reading for comprehension.” – GenePoole
Make sure you extract the hack kit to your pc maintaining the directory structure in the archive you downloaded. The docs will be in the root directory of the unarchived kit, as will the scripts. READ THE EFFEN MANUAL.
I can’t believe that so many people are asking where the effen manual is. THE EFFEN MANUAL IS IN THE EFFEN HACK KIT.
This kit should work fine on HTC Inspire and HTC Desire HD Software versions below 3.06.405.1 which require the radio/kernel downgrade before a root exploit is available.
Windows Prep:
IMPORTANT – disable all malware (Antivirus detection etc) detection before unarchiving the hack kit. Keep it off thoughout the hack kit processes. Many Windows malware detection programs report false positives, deleting or binding critical files required by the process.
IMPORTANT – Remove or disable all services and daemons you can, particulary anything Apple, blackberry, PDAnet, Microsoft Mobile, anything USB not required for this task, any resource hogs. Also disconnect all un-needed USB devices and USB HUBs.
Remove HTC Sync and drivers.
Only after completing the above steps, install the drivers contained in the Hack Kit (see the Effen Manual) BEFORE plugging in the phone.
Connect the phone to the computer via a USB port connected to the system board – not a front panel port or a hub or extention port.
Verify successful android device driver installation in device manager.
Issues during downgrade:
IMPORTANT: BEFORE SWITCHING FROM DISK DRIVE TO CHARGE ONLY MODE, ALWAYS EJECT THE SDCARD WITH PC SOFTWARE TO FLUSH WRITE BUFFERS AND AVOID CORRUPTING THE SDCARD.
model ID incorrect update fail – this is because your goldcard is not working.
READ THE EFFEN MANUAL. Reading is fundamental.
Download:
Note: AAHK filename uses ddmmyyyy naming convention.
aahk-11092012.zip
md5: 5727960aa167b305b8f3561ffbbb1360
viperbjk is with Revskills, and his contribution is key to finally allowing one step processing where a goldcard is required. The entire process is now one menu step. A second step will be required to clear your conscience –
DONATE to:
Revskills.
and/or
Electronic Frontier Foundation
Note: No money has been accepted for the AAHK or support of the AAHK by myself or anyone working with me on it.
If you have read this post and the effen-manual and get stuck during processing,
help is available in IRC at http://webchat.freenode.net/?channels= – aahkSupport
Yes, there are stupid questions.
Questions that will get you immediately kickbanned from the IRC channel with no further explanation:
Q: Do I need to flash a ROM after the hack kit is finished?
A: Kickban. The hack kit is a complete, one step process. If it finishes correctly, you are finished. What part of “fully functional” is vague?
Q: Do I need to flash a radio after the hack kit is finished?
A: Kickban. The hack kit is a complete, one step process. If it finishes correctly, you are finished. What part of “fully functional” is vague?
Q: The options menu has options to flash radios. Do I need to flash a radio?
A: Kickban. What part of “optional” is vague? This option is to make it easy for people who may have flashed another radio and want to flash back to these particular radios.
Q: Do I need to plug in the phone?
A: Kickban. If you know how to enable usb debugging without a USB connection, then I’ll change this policy. In the meantime, asking such a question just makes me think you have not read anything and/or have dedicated yourself to being an idiot.
Q: What’s the best ROM?
A: Kickban. The whole point of this is to give YOU control and allow YOU to decide. Yes, we prefer CM7 and I think it’s the only real Android choice available, but don’t ask us to think for you. If you don’t see that pretty much everything else is either ripped off or HTC Non-Sense, then you haven’t done your homework and that’s okay. Just don’t ask, because in the end, it’s YOUR choice.
Q: Facebook doesn’t work.
A: Kickban. This has nothing to do with anything but Facebook. Go ask Facebook, not us.
Q: I can’t find the pass key.
A: Kickban. Really? Then you did not really read the Effen Manual. If you really did, then you would not ask. Really.
Q: My phone won’t boot – how do I fix my HBOOT?
A: Kickban. We’ve been warning people not to flash Froyo Hboots (Including HTC ENG ones) on devices shipped with GB for going on a year now. If you do this and screw up, it’s not our fault and you’re on your own.
This IRC channel is for people who read, attempt and get stuck because of PC issues or an occasional bug introduced with a new feature. It’s not for people to troll those who dedicate their time for support without any compensation by asking a series of mindless, inane questions and observations for attention. We’re too busy for that – even if we have nothing to do. It’s beyond annoying and you will be kickbanned without warning. Read, search, think, try, then ask.
The people in #aahkSupport have been helping noobs without compensation for over a year now, with generally very good results and a generally good nature, despite being abused by some on almost a daily basis.
Thanks to:
Revskills for their fantastic gold card algorithym
GenePoole for the kickass android goldcard binary based on above
agrabren for fre3vo, the Gingerbread temproot used
scotty2 for finding the vold exploit and the author of psneuter
Guhl for misc_version and gfree
hyuh for misc_version revisions and Hboots with ENG features
jcase for taco root
shad0wf0x for his windows scripting contributions
ktilcu for DOC contributions
anthony1s for his review and unique perpective
neolobster for his generous file hosting
The > 150,000 downloaders of the hack kit, most of whom seem to get though it without issue.
and they have amazing feedback's, lets try it now....
sow far as I see he dues everything you just need to site back and wait, look's amazing.........
new Advanced Ace Hack Kit system
thanks for the new development!
let's see in a hour time how he dues lol
PauloMHAlmeida said:
sow far as I see he dues everything you just need to site back and wait, look's amazing.........
new Advanced Ace Hack Kit system
thanks for the new development!
let's see in a hour time how he dues lol
Click to expand...
Click to collapse
Well, don't forget that you also need to read the "effen manual!"
I have not forget to read it but is a fail....
thanks for telling me that but I found the solution for all S-ON HTC...
and for the Hboot lol
is a big journey I made on the last months, and I have put some staff all together and got it made lol
just wait for my next post how to duet....
look for my next post
There's no need to make the phone S-OFF (like some people say).
PauloMHAlmeida said:
look for my next post
There's no need to make the phone S-OFF (like some people say).
Click to expand...
Click to collapse
With S-ON your bootloader is locked.
And without ENG S-OFF you can't change the radio.
S-OFF is necessary for me
And btw... i don't know what you do..
But with the Hack Kit i've rooted about 15 DHDs in my circle of friends.
Some devices with problems. But after manually downgrade with RUU no problems at all.
I'm finish here Just look for my next publication Thanks
fr34kde said:
With S-ON your bootloader is locked.
And without ENG S-OFF you can't change the radio.
S-OFF is necessary for me
And btw... i don't know what you do..
But with the Hack Kit i've rooted about 15 DHDs in my circle of friends.
Some devices with problems. But after manually downgrade with RUU no problems at all.
Click to expand...
Click to collapse
There's no need to make the phone S-OFF (like some people say).
Disable fast/quick reboot (Settings » Power » Fastboot)
Download all
Fastboot commander.zip http://www.mediafire.com/download.php?xsu7c3m981o9gb8
Google.zip http://www.mediafire.com/download.php?cm9pdoh2g9mkgvb
Superuser-3.1.3-arm-signed http://www.mediafire.com/download.php?kzpbhq13jb085s8
Android ultimate toolbox pro http://www.mediafire.com/download.php?6m5w39zmb6ph8gq
Recovery.img http://www.mediafire.com/download.php?grl8wsjzxihhfwf
Update http://www.mediafire.com/download.php?dzkww8zaq7sxhae
Fastboot.bin http://www.mediafire.com/download.php?bhzth13p4kvow4v
Copy in to the root of your sd card after been formatted
Google.zip + Update.zip + Superuser-3.1.3-arm-signed.zip
On your pc create a new folder on C: and name it HTC for easy access and copy in to the folder
Recovery.img + fastboot binary
Install on your PC
Fastboot commander.zip + Android ultimate toolbox pro
Start rooting
Unlock bootloader: http://htcdev.com/bootloader/
Put the phone in Fastboot USB mode (Turn off, hold Volume Down + Power)
fastboot oem get_identifier_token
fastboot flash unlocktoken Unlock_code.bin (file from email)
Install ClockWorkMod recovery the recovery.img from my link our use android ultimate box to flash recovery
fastboot flash recovery recovery.img
Make a backup
Start clockworkmod recovery (Fastboot mode, Recovery)
Select backup and restore
Select backup
Go to your mobile start it as Fastboot and go to recovery
You go in to Clockworkmod Recovery V5.0.2.7 from the Ace Hack Kit
On the top is the menu with + and – buttons just scrool in to advanced and press power
Select “Wipe Dalvik Cache”
Then select “Wipe Battery Stats”
Then select “And go back”
Then select “Wipe data/Factory reset”
Then select “Wipe cache Partition” (Now you have cleaned all the old staf from your mobile)
Now let’s start rebuild the HTC
Select "apply update from sdcard"
Then select "Yes - install update.zip" to confirm
Then select "install zip from sdcard"
Then select “google.zip”
Then select "Yes - install google.zip" to confirm
Then select "install zip from sdcard"
Then select "su-3.0-efgh-signed.zip"
Then select "Yes - install su-3.0-efgh-signed.zip" to confirm
Then go back to your pc for the files you have download and unzip update and copy Boot.bin to the file you created C:\HTC
o Flash boot.img trough fastboot:
o fastboot flash boot boot.img
o Reboot
• Done
• You should have now a white screan from HTC for at least 5 minutes and after will sart the new room, just let it on for a couple minutes and you will see the sucess….
All my files are at http://www.mediafire.com/?al6dsdcd6c02f
Enjoy it, next I will say how to sort google play problem I found it easy lol…
PauloMHAlmeida said:
[....]
Unlock bootloader: http://htcdev.com/bootloader/
[....]
Click to expand...
Click to collapse
And thats the point.
You do what S-OFF does through HTC-Tool.
Now u unlocked the bootloader and your warranty is gone because your device is registered now.
Why should anyone go the complicated way if there is an easy way?
Firts have 2 types of waranty, 1st the manufactors warranty. That runs off 3 years after your purchase, 2nd the software warranty... And HTC have take off that point on the warranty, now you can unlock our relock the bootloader from your HTC with out lost of your warranty... By the way that's the reason HTC created HTC devoluppers web page...
And if you want to understand that just read all my post's. Changing our due hboot s-off make you lost warranty lol....
Sent from my HTC Desire HD A9191 using xda app-developers app
Unlocking Your Bootloader
HTC is committed to listening to users and delivering customer satisfaction. We have heard your voice and starting now, we will allow our bootloader to be unlocked for 2011 models going forward. We plan on releasing the updates that will allow you to unlock your bootloader in the coming months, please keep an eye on this website for more details on which devices will be adding this feature. We are extremely pleased to see the energy and enthusiasm from our fans and loyal customers, and we are excited to see what you are capable of. HTC eagerly anticipates your innovations.
It is our responsibility to caution you that not all claims resulting or caused by or from the unlocking of the bootloader may be covered under warranty. Please note that unlocking your bootloader does not mean that you will be able to unlock the SIM lock. Unlocking your SIM lock is at the discretion of your operator/carrier and is not part of the bootloader unlocking scope.
Our devices have been designed with our hardware and software specifications in mind and unlocking the bootloader will change the software and may cause unexpected side effects. It is impossible for HTC to ensure the proper functioning of your device after this. In the worst case scenario, it is possible that your device may be physically damaged due to overheating or the behavior of your device might be altered including, but not limited to, hearing aid compatibility (HAC) and specific absorption rate (SAR) values.
Some content on your device may also be invalidated and cannot be accessed any more because of invalid DRM security keys. This includes content that you may have purchased through a 3rd party vendor and through HTC. Furthermore, although you will still be able to receive updates to your device via FOTA (“firmware over the air”), we do not guarantee that updating your device via FOTA will not render your device unusable. Please understand that you will not be able to return your device to the original state and going forward your device may not be held covered under the warranty for all claims resulting from the unlocking of the bootloader. HTC bears no responsibility if your device is no longer usable afterwards.
HTC is committed to assisting customers in unlocking bootloaders for HTC devices. However, due to some of our carrier customers concerns, certain models with specific restrictions may not be able to be unlocked. Please refer to our list of supported devices to see if your device is eligible for unlocking the bootloader.
We strongly suggest that you do not unlock the bootloader unless you are confident that you understand the risks involved. This is a technical procedure and the side effects could possibly necessitate repairs to your device not covered under warranty. If you are still interested in unlocking the bootloader, and you understand the consequences both to your device and to your warranty, then you may refer to the following pages where we have provided the unlocking instructions.
Un lo c k Bo o tlo ad er
Unl oc k th e pos s ib ilit i es wit h to ta l cu s t omi zat io n
Unlock Bootloader
Frequently Asked Questions Preview Unlock Process
Supported Devices
Select “All other supported models” if you cannot find your phone in this list. Devices launched after 9/2011 will be shipped with the unlock capability. Please check back often for updates on the unlock status of additional devices.
------- Select Your Device ------
Beg i n Unl o ck Bo ot l o ad er
* Indicates HBOOT update required.
HTC is committed to assisting customers in unlocking bootloaders for HTC devices. However, certain models may not be unlockable due to operator restrictions. We continue to work with our partners on this, check back often for ongoing updates about unlockable devices.
Copyright © 2012 HTC Corporation. All rights reserved. Terms of Use Privacy Policy About HTCdev HTCDev Affiliates Follow Us Comments - Tell HTCdev what YOU want.