Develop Bugs

Successful Bliss OS Installation does not finish booting

I have installed the latest Bliss OS 10.0 beta to my computer using the android-x86 installer from the developers. After it finished it said that the installation was successful. When I try to boot into Bliss OS though it stops after
"detecting Android_x86 . . . found on /dev/sda4
Android-x86_64:/# "
it allows me to type some minimal commands but will not boot to Bliss OS. I have no idea what to do. Here are some specs of my laptop.
Machine name: DESKTOP-T1R6H4T
Machine Id: {CB81229F-8457-413F-A7A3-679CEB484FCF}
Operating System: Windows 10 Home 64-bit (10.0, Build 16299) (16299.rs3_release.170928-1534)
System Manufacturer: SAMSUNG ELECTRONICS CO., LTD.
System Model: 305E4A/305E5A/305E7A
BIOS: 00TL.MI22.20120511.SKK
Processor: AMD A6-3420M APU with Radeon(tm) HD Graphics (4 CPUs), ~1.5GHz
Memory: 4096MB RAM
Available OS Memory: 3564MB RAM
Page File: 2317MB used, 2590MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 12
DX Setup Parameters: Not found
User DPI Setting: 96 DPI (100 percent)
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
Miracast: Not Available
Microsoft Graphics Hybrid: Not Supported
DxDiag Version: 10.00.16299.0015 64bit Unicode
Card name: AMD Radeon HD 6520G
Manufacturer: Advanced Micro Devices, Inc.
Chip type: AMD Radeon Graphics Processor (0x9647)
DAC type: Internal DAC(400MHz)
Device Type: Full Device
Device Key: Enum\PCI\VEN_1002&DEV_9647&SUBSYS_C624144D&REV_00
Device Status: 0180200A [DN_DRIVER_LOADED|DN_STARTED|DN_DISABLEABLE|DN_NT_ENUMERATOR|DN_NT_DRIVER]
Device Problem Code: No Problem
Driver Problem Code: Unknown
Display Memory: 2035 MB
Dedicated Memory: 499 MB
Shared Memory: 1536 MB
Current Mode: 1366 x 768 (32 bit) (60Hz)
HDR Support: Not Supported

I'm having the same problem. Did you ever get it to work?

Same problem
I have some problem.
My laptop is Lenovo 110-14ast AMD A9 wtih 4gb ram.
I was installed android x86, remix os, and now Bliss os but all os cant boot to android , stuck on logo (remix) or terminal before logo. ~androidx86#
Also i was installed on virtual machine gnu/linux but cant boot..
Very2 sadly with this..:crying::crying:

these are usually issues related to the kernel. try a build with a different kernel

Android x86 installer error "not all system requirement are met"

================Installer Info================
Installer Directory:C:\Users\Peñanueva\AppData\Local\Temp\RarSFX2
Installer Version:2.6.0.0
Secure Boot ... Not Supported
Manufacturer: Gigabyte Technology Co., Ltd.
Model: To be filled by O.E.M.
Product: H61M-DS2
BIOS info:
DELL - 1072009
BIOS Date: 04/17/13 12:03:18 Ver: 04.06.05
BIOS Date: 04/17/13 12:03:18 Ver: 04.06.05
Available GPU(s):
GPU: NVIDIA GeForce GT 730
=============[REQUIREMENTS CHECK]============
Administrator privilege ... ok
CPU Architecture: 9
CPU Name: Intel(R) Pentium(R) CPU G620 @ 2.60GHz
OSVer: Microsoft Windows NT 6.1.7601 Service Pack 1
Windows Security: Access NVRAM Privilege ... Not All Set
System Firmware: Other
==========================================
my BIOS support both legacy and UEFI

Secure Boot ... Not Supported
must disable secure boot

same problem here, been fiddling with the BIOS and managed to update it to the latest version. on the BIOS Secure boot is set to disabled but the installer still reads it as "Secure Boot ... Not Supported"
EDIT: Solved

Wondering how you solved this?
I have secure boot disabled and it still reads "Secure Boot ... Not Supported"
Thanks!

Bliss OS fail to install right at the beginning

================Installer Info================
Installer Directory:C:\Users\Khoa Dang\AppData\Local\Temp\droidinst_efi
Installer Version:2.4.5800.0
Secure Boot ... Disabled
Manufacturer: ASUSTeK COMPUTER INC.
Model: GL552JX
Product: GL552JX
BIOS info:
_ASUS_ - 1072009
GL552JX.202
American Megatrends - 4028E
Available GPU(s):
GPU: NVIDIA GeForce GTX 950M
GPU: Intel(R) HD Graphics 4600
=============[REQUIREMENTS CHECK]============
Administrator privilege ... ok
CPU Architecture: 9
CPU Name: Intel(R) Core(TM) i5-4200H CPU @ 2.80GHz
OSVer: Microsoft Windows NT 10.0.17134.0
OperatingSystem Version ... ok
Windows Security: Access NVRAM Privilege ... Not All Set
System Firmware: UEFI
==========================================
====Install Started on 12/25/2018 11:25:40 PM====
-ISO File: C:\Users\Khoa Dang\Downloads\Bliss-v11.4-Stable--OFFICIAL-20181223-2005_x86_64_k-kernel-4.19_m-18.3.1_pie-x86_f-dev-kernel.org.iso
-TargetDrive: F
-UserData: 3984589
-Setup Directories...
-Folder Created: F:\AndroidOS
-Extract ISO
#Launch:C:\Users\Khoa Dang\AppData\Local\Temp\droidinst_efi\7z.exe x "C:\Users\Khoa Dang\Downloads\Bliss-v11.4-Stable--OFFICIAL-20181223-2005_x86_64_k-kernel-4.19_m-18.3.1_pie-x86_f-dev-kernel.org.iso" "kernel" "ramdisk.img" "initrd.img" "system.*" -oF:\AndroidOS
Error Executing C:\Users\Khoa Dang\AppData\Local\Temp\droidinst_efi\7z.exe with Args: x "C:\Users\Khoa Dang\Downloads\Bliss-v11.4-Stable--OFFICIAL-20181223-2005_x86_64_k-kernel-4.19_m-18.3.1_pie-x86_f-dev-kernel.org.iso" "kernel" "ramdisk.img" "initrd.img" "system.*" -oF:\AndroidOS
Error output:
7-Zip 9.28 alpha Copyright (c) 1999-2012 Igor Pavlov 2012-06-20
Processing archive: C:\Users\Khoa Dang\Downloads\Bliss-v11.4-Stable--OFFICIAL-20181223-2005_x86_64_k-kernel-4.19_m-18.3.1_pie-x86_f-dev-kernel.org.iso
Extracting initrd.img
Extracting kernel
Extracting ramdisk.img
Extracting system.sfs Data Error
Sub items Errors: 1
==============Revert Installation==============
-Cleaning up Android Directory ... F:\AndroidOS
===Removing Boot Objects===
-Mounting EFI Partition...
#Launch:C:\Windows\System32\mountvol.exe Z: /S
Error Executing C:\Windows\System32\mountvol.exe with Args: Z: /S
Error output:
The parameter is incorrect.
-Remove Android UEFI Entry
-UEFI: -1
-Cleaning up Android Directory ... Z:\EFI\Android\
-UnMounting EFI Partition...
#Launch:C:\Windows\System32\mountvol.exe Z: /D
Error Executing C:\Windows\System32\mountvol.exe with Args: Z: /D
Error output:
The system cannot find the file specified.
==========================================
====Install Started on 12/25/2018 11:48:46 PM====
-ISO File: C:\Users\Khoa Dang\Downloads\Bliss-v11.4-Stable--OFFICIAL-20181223-2005_x86_64_k-kernel-4.19_m-18.3.1_pie-x86_f-dev-kernel.org.iso
-TargetDrive: F
-UserData: 39845888
-Setup Directories...
-Folder Created: F:\AndroidOS
-Extract ISO
#Launch:C:\Users\Khoa Dang\AppData\Local\Temp\droidinst_efi\7z.exe x "C:\Users\Khoa Dang\Downloads\Bliss-v11.4-Stable--OFFICIAL-20181223-2005_x86_64_k-kernel-4.19_m-18.3.1_pie-x86_f-dev-kernel.org.iso" "kernel" "ramdisk.img" "initrd.img" "system.*" -oF:\AndroidOS
Error Executing C:\Users\Khoa Dang\AppData\Local\Temp\droidinst_efi\7z.exe with Args: x "C:\Users\Khoa Dang\Downloads\Bliss-v11.4-Stable--OFFICIAL-20181223-2005_x86_64_k-kernel-4.19_m-18.3.1_pie-x86_f-dev-kernel.org.iso" "kernel" "ramdisk.img" "initrd.img" "system.*" -oF:\AndroidOS
Error output:
7-Zip 9.28 alpha Copyright (c) 1999-2012 Igor Pavlov 2012-06-20
Processing archive: C:\Users\Khoa Dang\Downloads\Bliss-v11.4-Stable--OFFICIAL-20181223-2005_x86_64_k-kernel-4.19_m-18.3.1_pie-x86_f-dev-kernel.org.iso
Extracting initrd.img
Extracting kernel
Extracting ramdisk.img
Extracting system.sfs Data Error
Sub items Errors: 1
==============Revert Installation==============
-Cleaning up Android Directory ... F:\AndroidOS
===Removing Boot Objects===
-Mounting EFI Partition...
#Launch:C:\Windows\System32\mountvol.exe Z: /S
Error Executing C:\Windows\System32\mountvol.exe with Args: Z: /S
Error output:
The parameter is incorrect.
-Remove Android UEFI Entry
-UEFI: -1
-Cleaning up Android Directory ... Z:\EFI\Android\
-UnMounting EFI Partition...
#Launch:C:\Windows\System32\mountvol.exe Z: /D
Error Executing C:\Windows\System32\mountvol.exe with Args: Z: /D
Error output:
The system cannot find the file specified.
==========================================
Any help guys ? Looking for an OS to increase game performance. Tried RemixOS , PhoenixOS ( works well but rooted ) . Finally i found BlissOS which is not pre-rooted. Tried with other android OS but still didnt work. Thank you

run as admin

Failed installation as well... and : as administrator
Here the log:
I have installation error as well... still wondering what was wrong though...
Here's the log:
================Installer Info================
Installer Directory:C:\Users\abang\AppData\Local\Temp\RarSFX0
Installer Version:2.6.0.0
Secure Boot ... Not Supported
Manufacturer: FUJITSU
Model: SH760
Product: FJNB20B
BIOS info:
FUJ - 1070000
Version 1.07
VVVVVer 1.00PARTTBL8
Available GPU(s):
GPU: NVIDIA GeForce 310M
=============[REQUIREMENTS CHECK]============
Administrator privilege ... ok
CPU Architecture: 9
CPU Name: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz
OSVer: Microsoft Windows NT 10.0.17134.0
OperatingSystem Version ... ok
Windows Security: Access NVRAM Privilege ... Not All Set
System Firmware: Other
==========================================

set UAC to "Never" and try to install it
I manage to install it but when I boot it up, I got distorted boot animation and stuck on loading. Anyone knows how to fix that?

How to debug aosp emulator on Mac OS M1

Dear All,
I'm new to this forum, so apologies if this is not the right section for my question.
I'm entering the world of AOSP and I built the product target aosp_arm64-eng on a MacOS M1 (ARM64 processor).
Unfortunately when I launch the emulator I get a kernel panic with the below message and I would like to understand how I can debug it
Code:
RAMDISK: lz4 image found at block 0
RAMDISK: lz4 decompressor not configured!
Invalid ramdisk decompression routine. Select appropriate config option.
Kernel panic - not syncing: Could not decompress initial ramdisk image.
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.94+ #1
Hardware name: ranchu (DT)
Call trace:
[<ffffffc00008a590>] dump_backtrace+0x0/0x128
[<ffffffc00008a6cc>] show_stack+0x14/0x1c
[<ffffffc0005ca064>] dump_stack+0x80/0xa4
[<ffffffc0005c95a0>] panic+0xe8/0x228
[<ffffffc00074ba34>] rd_load_image+0x2fc/0x5e0
[<ffffffc00074be30>] initrd_load+0x50/0x2cc
[<ffffffc00074b47c>] prepare_namespace+0xd8/0x1ac
[<ffffffc00074ad04>] kernel_init_freeable+0x1bc/0x1dc
[<ffffffc0005c8150>] kernel_init+0x10/0xf4
Rebooting in 5 seconds..Reboot failed -- System halted
From the message it seems that the kernel is not configured correctly.
How can I check if the kernel I build contained the LZ4 support with which the Ramdisk image seems to be compressed?
Thanks.

I think it's not possible to run an emulator on a mac with an arm processor see here

Unpacking Device Tree Blob From rockchip boot.img secondfile

GitHub - Evsio0n/rsce-go: Rockchip resource image (RSCE) Pack/Unpack Tool written in Go
Rockchip resource image (RSCE) Pack/Unpack Tool written in Go - GitHub - Evsio0n/rsce-go: Rockchip resource image (RSCE) Pack/Unpack Tool written in Go
github.com
Rockchip resources image(RSCE) is a binary file which contains device tree blob and additional resources (like vendor splash screen) and appears as boot.img-second on unpacking.
Author: @evsio0n
Usage​-u: Unpack the RSCE file to the specified directory.
e.g. ./rsce_tool -u ./boot-second
-p: Pack the file to RSCE file.
e.g. ./rsce_tool -p ./rk-kernel.dtb -p ./logo.bmp -p ./logo-kernel.bmp
use it at your own risk.

Beautiful tool, beats manually doing it every single time.