[ROM] CyanogenMod 7 for Nexus S - Running on Galaxy S [Unstable/Alpha]

[ROM] CyanogenMod 7 for Nexus S - Running on Galaxy S [Unstable/Alpha] - Galaxy S I9000 Android Development

I have got CM7 to boot on my Galaxy S using some of the same methods used to boot the stock Gingerbread ROM.
I take credit for nothing... All I did was switched around a couple files to boot CM7 instead of GB.
Requirements
You must be root on your phone
Your /data must be converted in Ext4 by Voodoo lagfix or another Ext4 lagfix.
You must have proceed to complete backups before
Some busybox installation is also useful for tar.
Another Important note
Be absolutely 100% sure you have access to the download mode using the 3 buttons combination.
If you don't, it will be extremely difficult (even if in theory not impossible) to to flash another kernel back.
This is the gingerbread Folder to push in /data/: h**p://dl.dropbox.com/u/17890197/gingerbread.tar
Steps:
1: Download CM7 dump to SDCARD:
h**p://dl.dropbox.com/u/17890197/CyanogenMod/CM7.tar
2: Run the following via ADB
adb shell
su
busybox mount -o remount,rw /data
cd /data
mkdir gingerbread
cd gingerbread
busybox tar zxvf /sdcard/CM7.tar
busybox cp -a /efs efs
sync
reboot recovery
3: Flash "nsonsgs-unsigned-cwm-update.zip" via CWM Recovery
Watch CyanogenMod 7 boot on your phone!
How do I get back?
This is a dual-boot setup... Everything is still intact that you were running before this.
All you have to do is download and flash your previous kernel via ODIN. Once you do this, the phone will reboot into Froyo. Simply reinstall the nsonsgs-unsigned-cwm-update.zip and your back on CM7 again, just like you left it. MAGIC!
What's about this port:
- It uses the Nexus S kernel compiled from sources by supercurio
- It runs the exact /system image release, that I pulled from a CM7 alpha .zip file posted in the NS forums.
Which filesystem?
This is simply a mod of supercurio's early gingerbread preview, so it runs on Ext4. no RFS at all, the kernel don't support RFS.
Does everything work ?
No; will update as I discover more of what does and doesn't work.
Camera is not working.
Wifi is not working.
This can fry the front camera.
Phone could not work . ( sometimes it works )
KEEP IN MIND
CyanogenMod ROMs do not come with any Gapps and using this method, you will not be able to access CWMrecovery to flash the Gapps files floating around. I hope to have an answer to getting Gapps installed with ease by late tonight.
Thanks for all the devs who did this hard work in such a short period of time... please donate to them.
DOWNLOADS:
Kernel : h**p://dl.project-voodoo.org/nexus-s-kernel-on-galaxy-s/nsonsgs-unsigned-cwm-update.zip
CM7 : h**p://dl.dropbox.com/u/17890197/CyanogenMod/CM7.tar
Gingerbread Folder: h**p://dl.dropbox.com/u/17890197/gingerbread.tar

Alberto96 said:
Kernel : http://dl.project-voodoo.org/nexus-s-kernel-on-galaxy-s/nsonsgs-unsigned-cwm-update.zip
CM7 : http://db.tt/TrRnYdm
Click to expand...
Click to collapse
Does this kernel fry front-facing camera?
Just a heads up.

Camera app is not working.

where did this CM7 come from?

from nexus s alpha build . http://forum.xda-developers.com/showthread.php?t=886903

sounds nice, thanks for sharing!
do phone/sms/data/wifi work?

jodue said:
sounds nice, thanks for sharing!
do phone/sms/data/wifi work?
Click to expand...
Click to collapse
Based on my experience from when running the GRH78 build, data etc will work (polling problems persist) Wifi will not work.

Just a heads up for people codeworkx and coolya said not to use this kernel as the voltages are wrong and can cause for you to fry your front facing camera.
They are working on a proper port. Be patient.
Plus its not really alpha because you are not really working in it so how can there be a beta?
This shouldn't really be in the development section.
Sent from my GT-I9000 using XDA App

I was thinking of doing this, never mind
Sent from my GT-I9000 using XDA App

@Alberto96, your CM7.tar.gz file is corrupted !
I've just tried your tutorial in the first post all went well until I typed the line "busybox tar zxvf /sdcard/CM7.tar.gz" then it gived an error :
tar: invalid tar magic
# tar: write: Broken pipe
Click to expand...
Click to collapse
I've tried re-downloading it three times, wipe dalvik cache, update busybox, activate USB debugging but it always gived me this error
tried with supercurios dump and all went well so it can only come from your dump
help will be much apreciated

i will upload a new CM7.tar soon . now i can't because is too late . tomorrow you will have the working one . However, it worked on my Galaxy. Maybe the upload is unsuccessful.
Edit : I did a test and found intact , not corrupted.
7-Zip [64] 9.20 Copyright (c) 1999-2010 Igor Pavlov 2010-11-18
Processing archive: C:\Users\Utente\Downloads\.ptmp573137\system.tar
Testing system
Testing system\app
Testing ..............
Testing system\xbin\vim
Everything is Ok
Folders: 63
Files: 1267
Size: 114894721
Compressed: 115906048

Will check that another time then...
Maybe that's because I tried to download it within the phone, I'm downloading now from my PC but... it is now a CM7.tar.tar file ??
will report back after few minutes...

still the same problem here
I've made a screenshot if it can help...
When you said u tested it what are you meanig ? did you try to flash or do you just clicked on the properties thing on the file ?
@Rawat, you are really boring if you don't want to test it on your GS just go get a life and leave this thread alone ! you are ridiculous...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Just bumping this.
This Rom/Port whatever will most likely fry your front camera

skyworxx said:
Just bumping this.
This Rom/Port whatever will most likely fry your front camera
Click to expand...
Click to collapse
Not correct if you don't use it at all

thanks for soft.
but loop boot, not work
device nexus, device android ... device nexus, device android ....

Everyone, we (the mods) have gone over this thread and the ROM posted here, and while it certainly will have a limited appeal and use, it is still within the guidelines for what is allowed...the proper credits, etc are included, and it doesn't violate GPL or any other regulations. Therefore the thread will remain, and I will ask everyone here to keep the discussions related to troubleshooting of the ROM itself.

I firmly believe that we should wait until an official alpha is posted by the CMSGS team.
After hearing of the front camera overvoltage, who knows what else could happen? The devs do, and they are working hard to bring us a great experience.
Excitement is great, but so is patience I'm sure it will be available very soon, so just hold on.

If you have a boot loop you must convert your data in EXT4 . I'm uploading the new file . And you must have mounted has R/W the data folder

i uploaded the new CM7.tar . Please test it on your phones .

Related

[DEV] CyanogenMod 6 (Froyo) on Galaxy Tab Public Beta

Hi guys,
Compiled Cyanogen 6 from sources:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All right folks, everything is now part of CMSGS project. See http://cmsgs.com and http://github.com/cmsgs
Use build instructions from http://cmsgs.com/mediawiki/index.php?title=Building_from_Source
Before building apply local patches from device/samsung/galaxytab/patches
After building use tools from device/samsung/galaxytab/tools to build kernel and build factoryfs.ext4 from system.img, read the readme files
Thanks to Deodexed, who provided his hosting, we now have public beta
Only for people with GSM tabs who know how to use adb and heimdall
If you dont know how to backup and restore your tab don't try it!
Grab: http://files.deodexed.com/ModADroid-Galaxy-Tablet/Technomancer/cm6beta.zip
Read the readme file and have fun ;-)
The Tab should be partitioned with P1_add_hidden like for JJ4 or later ROMs.
If anyone wants to use Odin, rename factoryfs.ext4 to factoryfs.rfs and tar all rfs files and zImage and Odin should be able to flash it too.
Status:
What works
Phone calls, data
Wifi
Bluetooth Keyboard
GPS
Buttons backlight - linked to LCD backlight
Sensors:
- BMA020/BMA150 Accelerometer
- AK8973B
What doesn't
Camera
Sensors:
- BH1721FVC light sensor
- L3G4200D gyro
- Some are probably screwed up because of hwrotation = 90
Bluetooth Audio
Issues and workarounds
* Stuck on CM boot ani after flash
Probably / data is not mounted.
run "adb shell mount"
it will show list of mounted partitions, if /data is not mounted to /dev/block/mmcblk0p2 as rfs, format the /data partiton.
To do that "adb reboot recovery". "adb shell" when in recovery, "parted /dev/block/mmcblk0", initialize/format partition 2 to fat32 using "mkfs 2 fat32"
* BT doesnt start
Try again
Try rebooting
If that doesnt help try "adb shell stop hciattach" Sometimes hciattach service gets stuck when starting. I have added code to stop it automatically.
Latest fixes:
2011-01-20
Replaced lights with my own built from source
The linking of backlight and button light is now done in lights module instead of java LightsService
Replace copybit and s3cjpeg modules with ones from noobnl's samsung/common
2011-01-19
Switch to Nexus S libaudio. Much simpler, doesn't crash and Bluetooth headset shows some signs of life.
2011-01-17
Fix p1_keyboard.kl, remove key codes unsupported in CM. add left and right alt.
Fixed exec flags on recovery executables
2011-01-16
Moved everything to http://github.com/cmsgs
This build should be functionally the same as previous one
2011-01-15
Fix vold configuration so usb mount/unmount works
Add code to bt_enable to stop hciattach service if it is stuck.
older
Switched back to binary vold which is better and enables UMS
Force Phone app to start with speaker on
Switch to su built from sources
Big thanks to
noobnl, coolya and codeworkx for advice and CMSGS work
Current testers:
lilstevie
A_Snowman
JeffR714
Landroid
clmntch
ayman07
You can catch me on Freenode as TCMAN-dmg

This is quite amazing. Great job. Do you really think you need to build it all from source? Can't you just modify the current build instead of starting from scratch? Wouldn't it be faster. Please people don't bug the dev about doing testing or helping if you have NO dev experience. I'm sure he will release it if it's stable enough. This thread is gonna get raped in sure of it

ayman07 said:
This is quite amazing. Great job. Do you really think you need to build it all from source? Can't you just modify the current build instead of starting from scratch? Wouldn't it be faster. Please people don't bug the dev about doing testing or helping if you have NO dev experience. I'm sure he will release it if it's stable enough. This thread is gonna get raped in sure of it
Click to expand...
Click to collapse
I have already built it (CM6 for Galaxy S) from source once, its not that bad.
I will need to create my own initramfs and proprietary samsung device files extracted from Tab ROM to get camera,wifi,bt and other stuff working.
Now where is my jar of vaseline ;-)

This is exactly what I've been waiting for!

Nice one
Sent from my GT-P1000 using XDA App

What about the Sprint Galaxy Tab?

This is awesome. I have the sprint tab and I always feel like my n1 running cm performs so much better than the tab even though the tab has more powerful hardware. Can't wait for this and certainly willing to help whether that be through testing or donations.
Sent from my Nexus One using XDA App

I only have ATT Tab so I can only do GSM development. But if any devs with Sprint or Verizon Tabs wanna join we can set up some git repositories ans cooperate.

So galaxy tab friendly our no?
Sent from my unlocked and rooted SGH-I987 using XDA App

Wow, this is awesome

Super Awsome buddy! All the best.

This is awesome work, but note it is really really unstable at the moment.
Last night when I was helping test it really did hose things, had to repartition and reformat the entire internal MMC to get any default firmwares to even boot again
But this is a good sign for the future

i cant wait for this

bumpity bumpy bump
CM 6 compiled from sources now! Looking for testers , see first post

Now to pull from the CM7 source for some Gingerbread goodness
I can test if you want, running JME at the moment on a GSM Tab.

knightnz said:
Now to pull from the CM7 source for some Gingerbread goodness
I can test if you want, running JME at the moment on a GSM Tab.
Click to expand...
Click to collapse
Gingerbread goodness most likely requires newer kernel (2.6.35) so its not that easy ;-(

Will a cdma version be worked on or no?
Sent from my ADR6300 using XDA App

I would test but im not very good at android. I can flash my N1 like the best of them thou.
Sent from my AT&T TAB using XDA App

papi92 said:
Will a cdma version be worked on or no?
Click to expand...
Click to collapse
No
You are welcome to start working on it yourself

coming along well, hope its read by the time i get my tab. keep up the good work

[DISCONTINUED][NAND][RAM] darkstone SuperNAND FroYo RC1 [kernel: Hastarin Custom]

Discontinued as of 21/12/2011. Will be working on SD card builds IN MY SPARE TIME from now on instead.
I'm back at university, I don't have free time like a lot of the other chefs here do.
THIS IS A HIGHLY EXPERIMENTAL ROM, I CAN'T GUARANTEE THIS WILL BE COMPLETELY STABLE. DO NOT USE THIS IF YOU NEED 100% STABILITY.
THIS IS NOT A SENSE ROM. DO NOT ASK FOR ONE.
Continuation of this rom: http://forum.xda-developers.com/showthread.php?t=870518
Original credits are in this thread
darkstone's SuperNAND Froyo NAND ROM (RC1) for HTC HD2
===========================
Based on AdamG's Oxygen v1.2 ROM for the HTC Desire.
This is a continuation of the SD Card RAM build that I was making for earlier SuperRam builds.
Information:
This build uses RMNET.
I have implemented my own version of APPS to SD. You can use this if desired.
You must make two folders on the root of your SD Card. One must be named .android_secure and the other should be named app.
Look at post #2 down this thread for more information on how to use this.
Google maps and wifi tether is missing at the moment since this is a beta.
Provided seperately in post #2
Robot voice issue may occur when in a call. If this happens, during the call press the LOUDSPEAKER button then END THE CALL. Do this exactly and every call after will no longer have this issue.
Use Multi Mount SD Card from market to transfer files using USB if using APPS to SD.
To make changes to the build permenantly, you need to push / delete / rename / etc the files that are supposed to go in:
/system/lib or /system/app or /system/framework
to
/ramfiles/lib or /ramfiles/app or /ramfiles/framework
Other folders in /system work as normal and can be modified permenantly.
Click to expand...
Click to collapse
1. Installation
===============
MAGLDR 1.10 or newer is required on the device.
Before starting the installation process, enter "USB Flasher" mode on the device by using the Volume rocker switch to select items and the green "Call" button as the Enter key.
3. Post installation notes
==============
You can change the kernel to a newer/custom version by doing the following:
Connect via USB to your HD2 while Android is running.
Spawn an ADB shell
Do the following commands as superuser:
mkdir /tmp/boot
mount -t yaffs2 /dev/block/mtdblock0 -o rw,noatime,nodiratime /tmp/boot
After that, you can replace the zImage that's located in /tmp/boot
When you're done, you have to unmount the boot partition, like so:
umount /tmp/boot
Restart your device to use the new kernel.
==============
ReadMe originally by Rajko
Kernel is based on hastarin eb with my own customizations. Enabled EXT4/3, btrfs, yaffs support. Enabled framebuffer console. Updated LED driver with one by dan1j3l. Kernel source: http://www.multiupload.com/BBKXXMIO7C
Click to expand...
Click to collapse
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
^ Home screen - Keyboard ^
^You^
http://www.multiupload.com/CLFNW0OZ25
Click to expand...
Click to collapse

I've made a custom method to store Apps to SD Card without the need for data.img or an EXT partition on your SD card.
Your apps will be moved to /SDCARD/app
Here's how to move your apps:
Download Gscript from market or from HERE and install then open the app.
^Add a new script^ ^Fill the blank spaces with exactly what you see here^ ^Run the script everytime you want to move your apps to the SD Card^
Note: this is not reversable yet.
Note: this is still an experimental feature, however beta tests have indicated that this method is fine!
Click to expand...
Click to collapse
If you have issues with battery usage being high in standby, then uncheck "Use wireless networks" in the Location and security settings menu:
Click to expand...
Click to collapse
For Google Maps, install it from market.
For wifi tether, install this: http://code.google.com/p/android-wifi-tether/downloads/list (Version 2.0.6)

First! Ahahah :d
Good Job my friend.. This is another step in the htc hd2 android innovation! Thanks for all your efforts!

Fiiirrst :d
edit: DAMN! ;D

Thank YOU Darkstone downloading now !

Wow... Welcome back darkstone ... waiting for links to test...
P.S First one
EDIT: Ohoo come on ....

Was going to sleep... But now that i saw this...
Thanks!

Would love to get a Gingerbread of this!

darkstone i freaking love you! thanks!!!!
now downloading ------> super-ultra-extra-mega-magical-rainbow-****ting-nandrambuild

Thanks Darkstone...back on Scene!

Definitely trying this out!

come oooooooon!!!

nice, can't wait!!!!!
You've kept your promise, 11:59 GMT

saintsmmx said:
Would love to get a Gingerbread of this!
Click to expand...
Click to collapse
Gingerbread must be released after fixing GPS issue... (where it drop gps/loose satellites during navigation)

wifi tether
If i download the wifi tether app will wifi tethering work then?

New version of app2sd? Is it... Data2sd??

hohoho! Some nand builds will get pwnd!!!!!!!!!
Darkstone rulez!

Darkstone is back babyy !!!!!
I'm following this topic and waiting for your updates

Downloading, and waiting for details

Sweet man, been looking forward to this Sent you an email about logo.rle

[KERNEL] 26/Jan r3: MoDaCo Custom Kernel for the Samsung Galaxy Tab

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you've been following my Twitter feed, you will have noticed i've finally started playing with (and enjoying) my Tab.
I've been playing with ROM updates, ClockworkMod recovery and other bits and bobs, and here is the first fruit of my labour - MoDaCo Custom Kernel r1 for the Samsung Galaxy Tab.
What? Why?
Koush has posted his EXT4 converting ClockworkMod release / kernel at XDA-Developers, however unfortunately it breaks a fair few things on the latest ROMs for international Tabs - keyboard backlights, rotation, camera and a few other bits. So, I set about compiling up my own kernel using Samsung's source, with the aim of including all of Koush's great additions plus the usual TUN and CIFS modules, as well as including things like IKCONFIG to make kernel development easy for others (particularly as I plan to upload the whole lot to github). As well as releasing for EXT4 / ClockworkMod, i've packaged it for standard RFS ROMs. The kernel / ramdisk is 'insecure' (for adb remount etc.).
This turned out to be somewhat traumatic due to the 'update1' Samsung source refusing to work on my device, but I got there in the end. So this is a prelude to the MoDaCo Custom ROM... my MoDaCo Custom Kernel.
Requirements
This kernel has been tested on a number of Tabs running a number of different ROMs with no issues. It comes in two versions - a simple 'RFS' version to use with a regular ROM, or the 'EXT4 ClockworkMod' version if you already have (or wish to) convert to EXT4.
In order to use either kernel you need to be familiar with flashing via Odin or Heimdall, although you could in theory extract the TAR file and flash using 'flash_image' I guess.
If you plan to do the EXT4 conversion, you MUST have a microSD inserted with enough space to do a backup of your system / data partitions (so this will depend on how much data is on your device).
YOU SHOULD BACKUP BEFORE INSTALLATION OR BE FAMILIAR USING ODIN / HEIMDALL FOR FULL SYSTEM RECOVERY IN CASE OF A SERIOUS ISSUE. YOU USE THESE DOWNLOADS AT YOUR OWN RISK!
This kernel is ONLY tested on a UK Galaxy Tab. It MAY work on other GSM Tabs, it almost certainly WON'T work on a CDMA Tab. If you have a non UK Tab and want to test (and know how to flash back to a regular version), then go ahead and report your results. At your own risk.
How to
RFS version
To use the RFS version (i.e. you have not converted to EXT4 yet and don't wish to)...
Download the RFS TAR file from below
Flash using ODIN (version 1.7, do not select the 'repartition' option)
Reboot, you're done!
Optionally download the kernel modules zip (for TUN/CIFS) and copy to a location of your choice
Simple huh?
EXT4 version
To use the EXT4 version (i.e. you are already running EXT4 or you wish to convert)...
Download the EXT4 TAR file from below
Flash using ODIN (version 1.7, do not select the 'repartition' option)
IF YOU NEED TO UPGRADE TO EXT4: Your device won't reboot normally - that's OK, just turn it off (hold down power button for 5 seconds)
IF YOU NEED TO UPGRADE TO EXT4: Load recovery - turn the device on with 'volume up' held
IF YOU NEED TO UPGRADE TO EXT4: Your device will now perform the EXT4 conversion - depending on the volume of your data, this can take a while, so be patient
Reboot, you're done!
Optionally download the kernel modules zip (for TUN/CIFS) and copy to a location of your choice
Downloads
DOWNLOAD
And finally
I hope this is usual for everyone - i've found this is a real performance boost (particularly with the newest ROMs) and I look forward to rolling MCR out for the Tab! I'll have the kernel in GitHub soon, after which i'll post the URL here.
Enjoy!
P

Changelog
r3 26/Jan
Additional governor / scheduler options
Battery icon fix for when device is powered off
Other minor tweaks
r2 24/Jan
Set default governor to 'on demand'
Added Fuse module (by request)
MCK version now shown in about
Updated compiler
EXT4 performance tweaks
r1 23/Jan
Initial release

Looks good!
Great too see you here!

Looking forward to the first MCR!
Does the RFS version include CWM?

On what versions will this work?
Thanks for the effort you put into this. Can you please tell on what version the base Tab must be, to make this kernel work? And also, if it will work with the protected bootloaders?
Thanks again!

Testing it now on Roger/AT&T GSM Tab i987.
It is backing up and converting to ext4 right now.

It would be helpful if you put GSM in the title, or Euro for that matter, if that's the case.

Cheers Paul,
Will give the EXT4 a whirl once I work out the pros/cons

Confirmed that it works for NA GSM Tabs. Converted everything over to ext4 and working.
No real increase in speed really. Quadrant scores are about the same...around 1000.
Gallery has some glitches were it does not show pictures the first time...have to exit and come back in.

Let's give it a shoot
Sent from my GT-P1000 using Tapatalk

rmanaudio said:
Confirmed that it works for NA GSM Tabs. Converted everything over to ext4 and working.
No real increase in speed really. Quadrant scores are about the same...around 1000.
Gallery has some glitches were it does not show pictures the first time...have to exit and come back in.
Click to expand...
Click to collapse
I get this on all my Android devices now and again if a media index is running (generally soon after a boot)...
P

paulobrien said:
I get this on all my Android devices now and again if a media index is running (generally soon after a boot)...
P
Click to expand...
Click to collapse
Really weird problem where browser (with google.com as homepage) starts to rotate itself once you open browser till it is upside down!

If you have any issues, please post your ROM version and whether you are on the latest release.
I am on XXJMF and don't experience the issues mentioned above.
P

Great work man thank you!!! Only 1 ( noob i think question ) : what exactly do the additionals zip TUN/CIFS?

Frustu said:
Great work man thank you!!! Only 1 ( noob i think question ) : what exactly do the additionals zip TUN/CIFS?
Click to expand...
Click to collapse
If you don't know what they are, you don't need them

Screenshot from r2 (coming tomorrow).
P

TheGrammarFreak said:
If you don't know what they are, you don't need them
Click to expand...
Click to collapse
Ah ok thank you ... But i m curious please tell me

Im on Roto JME v4...and only problem found is Web browser rotates itself 180 degrees when you start it up.

Frustu said:
Ah ok thank you ... But i m curious please tell me
Click to expand...
Click to collapse
http://lmgtfy.com/?q=What+is+CIFS
http://lmgtfy.com/?q=What+is+TUN

TheGrammarFreak said:
http://lmgtfy.com/?q=What+is+CIFS
http://lmgtfy.com/?q=What+is+TUN
Click to expand...
Click to collapse
Well i learn 2 new things thank you

ROM Factory v1.7.1[May/12/2012]

Oficial Support for Galaxy S2
Back Up mode = Further information is needed to enable back up mode for this device

Am I right to understand that this is an alternative to taking Nandroid backup?.

hacksome said:
Am I right to understand that this is an alternative to taking Nandroid backup?.
Click to expand...
Click to collapse
no 10 xchar

So it will create an update.zip which is CWM flashable? How about generating a .tar.md5 for Odin?
Anyways, great work! Looking forward to this!

hacksome said:
Am I right to understand that this is an alternative to taking Nandroid backup?.
Click to expand...
Click to collapse
Sounds like it, looks cool non the less.
Sent from my GT-I9100 using XDA App

Kingybear said:
Sounds like it, looks cool non the less.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Afaik a nandroid backup is everything including data folder. This one i think is a little less than that. As op said it copies the rom so devs can pass them to their beta testers etc. A nandoid backup is including ur personal settings like bookmarks or last viewed webpages and contacts etc. And a nandroid backup is recovery dependant. Afaik a nandroid from a cwm v4 base wont be suitable for a phone with a cwm v5 phone.
Sent from my GT-I9100 using Tapatalk

FCM RC3 v1.4.4
FCM RC3 v1.4.4(Current Release)
Release Notes
Added Reset Option Menu.
Re-write the engine that configures the phone install!
fixed a bug on photon 4g.
fixed the force close of doom bug.
fixed sgs2att issues
fixed sgs2att install script
fixes to various bugs
Added support for latest ics
GUI Touch Ups
Added Experimental Support:
triumph, WX435, fb0, p999, p990, p970, ace, pyramid, galaxys2, GT-I9100, GT-I9100M, GT-I9100T, SGH-I777, SGH-I727, hercules, crespo, crespo4g, toro, maguro

#FCM RC4 v1.5(Current Release)
-GUI Enhancements
Multiple Screen Size support
Tablet Support
A new themed layout
NO MORE ADS
-Script Engine Enhancements
Options, ie: Dev name, rom name, save rom preferences.
-Performance
Complete Re-write of the install and create methods (faster performance)
The reset button is bye bye! The app will now erase the workdir as it creates the rom!

Hello Guys
Is anyone experiencing issues, someone msg me about some installation issues, but did not really offer any info. If you are an user and you are suffering from install issues, let me know!

guys for latest info always check http://fcm.x10.mx/joomla/

1.6 - The update that took a month. Will be release today. This will be amazing. I'm just waiting on testers.
Advance Mode
Apps Mode
Back Up Mode
New look
Open Source components
New site, new forums, new devices.
The update will be made available late tonight or early tomorrow. Depends on how tire I am after i get off work.
We are alive and kicking. Since release, Fruit Cake Maker has been downloaded 1,956 times. We are 556 active developers. A total of 12 bugs have been crushed. We currently work on 20+ devices and devices variants.
Nightlys and experimental.
Starting Feb 1st or 2nd. My build bot will begin auto compiling nightlys for those who want to experiment with the latest changes. Nightlys will be compile each night and made available no later than midnight.
An experimental build will begin to be compile mid Feb. the build will be compile every friday at 6pm. The experimental build will feture a different preference screen, and will require the user to specify all the variables. ie: boot location, system location, storage, mode. so on. This build aims at enthusiast who wish to use the tool on a non supported device.
FCM now has requirements. Busybox must be installed to use the back up mode.
Thank guys for your support.

I think it's great personally, used it on DHD also with ease.
I'm surprised this project doesn't receive more attention.
It certainly deserves it.
Many thanks

Wow. If I get it well, it create a flashable zip image of your current installation, with apps etc?
Wow. That will be a lot easier to share beta ROMs in the future.
Many many thanks.
Envoyé depuis mon GT-I9100 avec Tapatalk

I'm currently waiting on Google.
I submitted the new version into the market, but somehow i ended up with an older version being available for download. hopefully this issue will be solved soon. I'm sorry for the inconvenience.

1.6 finally!
Some of the testers are reporting errors with the new modes, but changing storage location seem to be working quit good. I will be writing a tutorial on how to properly use all the new modes. Regardless, this new version requires Busybox for app mode, and back up mode. It must be installed on /system/xbin << same location used by cm7 and cm9. I will be releasing a new version tomorrow or Thursday, to fix some of the new mode woes.
Again, sorry for the inconvenience.

Very good work!

Awesome! keep the good work, I will try it tonight from home.

Sounds Great
Hello,
The ROM Factory sounds like a great Idea, im not a developer but i can see why its great for devs,
Question is, will it be useful for just a user like I am?
if i am to use it to back up, how does it differ from Titanium and CWM NAND backup?
Thanks

Go read post #7

Off topic Corner > All off topic chat here only

I created this thread to avoid chatting into other threads keeping them clean..
Please if you have questions about anything post them here, and keep an order.
Use quoting of maximum 3-4 lines, use
or use @ to mention someone without quoting.
Thanks! :good: :highfive:

hi @corsicanu
i have samsung i9070 s advance
cwm and root install method: flash directly through stock recovery
and it does not increase binary counter
and you know that to flash something through stock recovery,
package must be signed with original signature
now, why not it be for fame and for other packages like roms or themes
do you have any idea about signing with an original signature
regards

Naney said:
hi @corsicanu
i have samsung i9070 s advance
cwm and root install method: flash directly through stock recovery
and it does not increase binary counter
and you know that to flash something through stock recovery,
package must be signed with original signature
now, why not it be for fame and for other packages like roms or themes
do you have any idea about signing with an original signature
regards
Click to expand...
Click to collapse
i have no idea how to sign them but i think i have a solution to flash cwm without increasing custom bin.. from what i`ve seen vroot works good for Galaxy Fame without increasing the counter.. And if you succed rooting you can use Flashify to flash img of cwm directly from phone, getting rid of odin.. I didn`t tested this but i assume it works.. will search to see if it`s any chance to sign zip`s with original and also i`ll try the above method to root and install cwm without increasing counter..

Hi @corsicanu
I think, like you, the better idea for optimize our FAME is a new Kernel... I don´t know how to make a new one, but if you can recommend me some literature about it, maybe I can help you in any task.
Thanks for your work.

corsicanu said:
i have no idea how to sign them but i think i have a solution to flash cwm without increasing custom bin.. from what i`ve seen vroot works good for Galaxy Fame without increasing the counter.. And if you succed rooting you can use Flashify to flash img of cwm directly from phone, getting rid of odin.. I didn`t tested this but i assume it works.. will search to see if it`s any chance to sign zip`s with original and also i`ll try the above method to root and install cwm without increasing counter..
Click to expand...
Click to collapse
hey this method is fully working 101% working........as i flash recovery every time with this method on my S6812 !!!!!
it does not effect phone working, binary counter, and it is 100% safe !!!!!!!
cheers !!!!!!!!!!

Vkas Raj said:
hey this method is fully working.. as i flash recovery every time with this method on my S6812 !
it does not effect phone working, binary counter, and it is 100% safe !
Click to expand...
Click to collapse
Not so sure about it.. I need to test it on a fresh device because i have a feeling that the counter will get to 1 automatically when it will detect custom binary flashed.

Hakets said:
I think, like you, the better idea for optimize our FAME is a new Kernel... I don´t know how to make a new one, but if you can recommend me some literature about it, maybe I can help you in any task.
Click to expand...
Click to collapse
First of all you will need a linux distro installed and configured. I followed this tutorial to make it happend. The only toolchain working for our kernel will be 4.6 as the source code needs an update for compiling with newer toolchains without errors. The source code for our devices is here. Download the proper pack for your device/region and unzip it. Inside will be 'how to' file. Looks like this:
Code:
################################################################################
1. How to Build
- get Toolchain
From android git server , codesourcery and etc ..
- arm-eabi-4.6
- edit Makefile
edit target architecture.
- ARCH ?= arm
edit "CROSS_COMPILE" to right toolchain path(You downloaded).
EX) CROSS_COMPILE= $(android platform directory you download)/android/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi-
Ex) CROSS_COMPILE=/usr/local/toolchain/arm-eabi-4.6/bin/arm-eabi- // check the location of toolchain
$ make bcm21654_rhea_ss_nevisp_rev00_defconfig
$ make
2. Output files
- Kernel : arch/arm/boot/zImage
- module : drivers/*/*.ko
3. How to Clean
$ make clean
################################################################################
Long story short:
Code:
mkdir ~/Desktop/kernel
cd ~/Desktop/kernel
mkdir nevis
mkdir toolchains
#Unzip source code for kernel into 'nevis' folder
#and toolchains into their folder.
cd ~/Desktop/kernel
export ARCH=arm
export CROSS_COMPILE=~/Desktop/kernel/toolchains/arm-linux-androideabi-4.6/bin/arm-linux-androideabi-
make bcm21654_rhea_ss_nevisp_rev00_defconfig
make -j16
The outputed file after succesfully compiling will be zImage. Using boot image tools, pack your new kernel with the new zImage and ramdisk.gz from old kernel. Congrats! Now you have a new kernel..
For changing govs, schedulers, freq`s and others see this and make changes in the source. After changing the source use 'make clean' before starting a new build of kernel. Hope i covered all.. Cheers!

Wow, nice answer, thanks so much.
Enviado desde mi GT-S6810 mediante Tapatalk

@corsicanu
buddy
i have problem with apktool
it does not work
i decompile package and even with no changes i can not recompile it
different faults each time
do you know anything about it
i have been using it for months, but i did not faced such a thing before
i updated sdk but no solution
very funny!
i searched xda but found nothing
i used it with no problem yesterday
and suddenly it created problems today
did not understand anything?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

install framework.apk and tw-framework.apk and set api level to 16 for 4.1.x roms.. and after that it should work.. i'm not at home and i can't give more instructions..

corsicanu said:
install framework.apk and tw-framework.apk and set api level to 16 for 4.1.x roms.. and after that it should work.. i'm not at home and i can't give more instructions..
Click to expand...
Click to collapse
buddy
i told, i have been using it for months
i already installed frameworks and worked on lots of apps
i know how to use it
but interesting, it suddenly gives errors!
regards

Naney said:
buddy
i told, i have been using it for months
i already installed frameworks and worked on lots of apps
i know how to use it
but interesting, it suddenly gives errors!
regards
Click to expand...
Click to collapse
sorry my bad.. i've read in rush.. try with a new working folder and re-setup apk tool.. i had those errors from second print when was a wrong api.. are you using the latest apktool? or try with other apk.. maybe its SecSettings guilty.. cheers!

corsicanu said:
sorry my bad.. i've read in rush.. try with a new working folder and re-setup apk tool.. i had those errors from second print when was a wrong api.. are you using the latest apktool? or try with other apk.. maybe its SecSettings guilty.. cheers!
Click to expand...
Click to collapse
it is not from tool version or working folder or apk.
i deleted apktool folder in personal folder and now it is ok again.
it contains 1 framework file at the moment.
what do you think, why is it?

Naney said:
it is not from tool version or working folder or apk.
i deleted apktool folder in personal folder and now it is ok again.
it contains 1 framework file at the moment.
what do you think, why is it?
Click to expand...
Click to collapse
dont know what to say.. when i decompiled i installed first framework-res and second was tw-framework.. and in personal were two zips.. 1.apk and 2.apk.. and from what i read in cmd from apktool output 1 was for framework and 2 was for tw-framework.. this method of setting up apktool i found it here on xda and was working for me.. but who knows.. if it's working i don't see any problem with that single zip.. btw test the outputted apk because it may compile without errors and could not work if there is anything wrong..

Develop Bugs

welcome