ha and aaa for frofile 1 and profile 0. after sending spc in qxdm and running "06:18:32.773 requestnvitemread ds_mip_ss_user_prof 0" i get all zeros in return for both secrets and both profiles. also need help with um tether nai and um user id in ppp config(see jpg attchment). will donate 10 or more for a working solution getting my 3g back
06:18:32.898 DIAG RX item:
06:18:32.898 index = 0
06:18:32.898 mn_ha_shared_secret_length = 0x00
06:18:32.898 mn_ha_shared_secret[0] = 0x00
06:18:32.898 mn_ha_shared_secret[1] = 0x00
06:18:32.898 mn_ha_shared_secret[2] = 0x00
06:18:32.898 mn_ha_shared_secret[3] = 0x00
06:18:32.898 mn_ha_shared_secret[4] = 0x00
06:18:32.898 mn_ha_shared_secret[5] = 0x00
06:18:32.898 mn_ha_shared_secret[6] = 0x00
06:18:32.898 mn_ha_shared_secret[7] = 0x00
06:18:32.898 mn_ha_shared_secret[8] = 0x00
06:18:32.898 mn_ha_shared_secret[9] = 0x00
06:18:32.898 mn_ha_shared_secret[10] = 0x00
06:18:32.898 mn_ha_shared_secret[11] = 0x00
06:18:32.898 mn_ha_shared_secret[12] = 0x00
06:18:32.898 mn_ha_shared_secret[13] = 0x00
06:18:32.898 mn_ha_shared_secret[14] = 0x00
06:18:32.898 mn_ha_shared_secret[15] = 0x00
06:18:32.898 mn_aaa_shared_secret_length = 0x00
06:18:32.898 mn_aaa_shared_secret[0] = 0x00
06:18:32.898 mn_aaa_shared_secret[1] = 0x00
06:18:32.898 mn_aaa_shared_secret[2] = 0x00
06:18:32.898 mn_aaa_shared_secret[3] = 0x00
06:18:32.898 mn_aaa_shared_secret[4] = 0x00
06:18:32.898 mn_aaa_shared_secret[5] = 0x00
06:18:32.898 mn_aaa_shared_secret[6] = 0x00
06:18:32.898 mn_aaa_shared_secret[7] = 0x00
06:18:32.898 mn_aaa_shared_secret[8] = 0x00
06:18:32.898 mn_aaa_shared_secret[9] = 0x00
06:18:32.898 mn_aaa_shared_secret[10] = 0x00
06:18:32.898 mn_aaa_shared_secret[11] = 0x00
06:18:32.898 mn_aaa_shared_secret[12] = 0x00
06:18:32.898 mn_aaa_shared_secret[13] = 0x00
06:18:32.898 mn_aaa_shared_secret[14] = 0x00
06:18:32.898 mn_aaa_shared_secret[15] = 0x00
ugggg. cant get my data working.
is the same problem i have
make sure your profile "0" is active/enable and open qxdm, connect your phone, type spc and msl, and then type requestnvitemread hdr_an_auth_passwd_long
Related
Nothing shows up, the phone will just boot to the Google logo with the pad unlocked. No matter what button combo I use it goes to the Google logo.
Does the MTP USB driver have anything to do with it? I have tried everything to get it recognized on my PC.
xrCore said:
Nothing shows up, the phone will just boot to the Google logo with the pad unlocked. No matter what button combo I use it goes to the Google logo.
Does the MTP USB driver have anything to do with it? I have tried everything to get it recognized on my PC.
Click to expand...
Click to collapse
what rom are you using?did you try to turn phone off and then first hold down in the middle of volume and power on?
Sent from my GT-N7000 using Tapatalk 2
afilopou said:
what rom are you using?did you try to turn phone off and then first hold down in the middle of volume and power on?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
I have no idea, I got the phone like this. Yes, volume down+power and up+down+power do nothing.
Here is the log I get after running OMAP Flash:
» Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
» Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0x14770000AE3B // Product name
eMMC CID PRV = 0x25 // Product revision
eMMC CID PSN = 0x0000AE3B // Product serial numbe
r
eMMC CID MDT = 0xAE // Manufacturing date
eMMC CID CRC = 0x1D // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification
version
eMMC CSD TAAC = 0x27 // Data read access-tim
e 1
eMMC CSD NSAC = 0x01 // Data read access-tim
e 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequ
ency
eMMC CSD CCC = 0x00F5 // Card command classes
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block
length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for r
ead allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign
ment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm
ent
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @
VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @
VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @
VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @
VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli
er
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size mul
tiplier
eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group
size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group
enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default
ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc
k length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w
rite allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a
pplication
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot
ection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot
ection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x33 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Se
ts
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase
unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase
timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write secto
r count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write
protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)
eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Perfor
mance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Perform
ance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Perfor
mance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Perform
ance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Perfor
mance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Perform
ance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MH
z at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MH
z at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MH
z at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MH
z at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure versio
n
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revisio
n
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision
eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface
timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory conten
t
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase g
roup definition
EMMC eMMC DRIVER INIT COMPLETE
» Downloading complete
» Elapsed time: 0:00.472 (99915 bytes/s)
» End loading driver
» Downloading
» Downloading 'Targets\Projects\tuna\MLO_4460_HS_PRO'
» Sending data (131072 bytes) :::::::::::::::::::: [131072]
» Downloading complete
» Elapsed time: 0:00.328 (399609 bytes/s)
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpap
i_base 0x00030400
» Downloading driver
EMMC eMMC DRIVER DEINIT COMPLETE
» Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
» Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0x14770000AE3B // Product name
eMMC CID PRV = 0x25 // Product revision
eMMC CID PSN = 0x0000AE3B // Product serial numbe
r
eMMC CID MDT = 0xAE // Manufacturing date
eMMC CID CRC = 0x1D // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification
version
eMMC CSD TAAC = 0x27 // Data read access-tim
e 1
eMMC CSD NSAC = 0x01 // Data read access-tim
e 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequ
ency
eMMC CSD CCC = 0x00F5 // Card command classes
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block
length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for r
ead allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign
ment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm
ent
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @
VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @
VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @
VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @
VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli
er
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size mul
tiplier
eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group
size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group
enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default
ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc
k length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w
rite allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a
pplication
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot
ection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot
ection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x33 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Se
ts
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase
unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase
timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write secto
r count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write
protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)
eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Perfor
mance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Perform
ance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Perfor
mance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Perform
ance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Perfor
mance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Perform
ance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MH
z at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MH
z at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MH
z at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MH
z at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure versio
n
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revisio
n
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision
eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface
timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory conten
t
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase g
roup definition
EMMC eMMC DRIVER INIT COMPLETE
» Downloading complete
» Elapsed time: 0:00.432 (109166 bytes/s)
» End loading driver
» Downloading
» Downloading 'Targets\Projects\tuna\sbl.img'
» Sending data (1835008 bytes) :::::::::::::::::::: [1835008]
» Downloading complete
» Elapsed time: 0:01.577 (1223330 bytes/s)
» cold_sw_reset
» Elapsed time: 0:09.409
Press any key to continue . . .
Click to expand...
Click to collapse
Bump!
The phone will power up and everything, correct? You are HOLDING the combo of Vol up/down and power for a couple of seconds right? Is there a custom ROM installed?
The phone will power on but will not go past the Google logo with the pad unlocked. I have tried every volume and power combo with, without battery, plugged in or not, it won't go anywhere. I have no idea what is installed.
xrCore said:
The phone will power on but will not go past the Google logo with the pad unlocked. I have tried every volume and power combo with, without battery, plugged in or not, it won't go anywhere. I have no idea what is installed.
Click to expand...
Click to collapse
You don't know what's installed...? Mmkay... did you try a different (fully charged) battery? After that, idk. Maybe let it rest w/o its battery for a few hours and try again. If not, then last resort would be a usb jib.
Yeah I bought the phone like this cheap to see if I could fix it, but I'm not having any luck. I will try the USB jig next.
Have you tried the toolkit? It has an option that says my phone won't boot to restore back to stock.
Yes, can't use the toolkit because it won't show up in adb or fastboot. In device manager it shows the driver as Samsung MTP device when on the Google logo, and as OMAP4460 when plugged in without battery (black screen).
In adb does it list your device? Can you verify you have correct drivers installed by plugging another gnex? I had issues with mine yesterday but it turned out to just be funky driver conflicts. I un installed all previous drivers and used the drivers from the toolkit and resorted to Odin to flash a stock build, then fast boot to flash cwm, and then cm9 Nightlies :beer:
Sent from my Galaxy Nexus using Tapatalk 2
Xoao
Form my SGS2 with 1ROM --VK-- 2ROM RootBox
z06mike said:
Have you tried the toolkit? It has an option that says my phone won't boot to restore back to stock.
Click to expand...
Click to collapse
This requires ODIN...
Sent from my Galaxy Nexus using xda app-developers app
bmg1001 said:
This requires ODIN...
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
OH! I was not aware of that. :good:
1 I'M NOT ENGLISH,sorry
hi,
yesterday and today i used my gnexus like always.
10 minutes ago,i wanted to play angry birds,but my phone didn't start
I removed battery but after it didn't start but when i put the battery in the phone,start camera flash.
Please help me,I could do a small donation if you help me
VIDEO
http://youtu.be/iEMzE-4JUJY
THANKS!:good:
musicmix96 said:
1 I'M NOT ENGLISH,sorry
hi,
yesterday and today i used my gnexus like always.
10 minutes ago,i wanted to play angry birds,but my phone didn't start
I removed battery but after it didn't start but when i put the battery in the phone,start camera flash.
Please help me,I could do a small donation if you help me
THANKS!:good:
Click to expand...
Click to collapse
long press VOL UP+VOL DOWN+POWER
do you see the bootloader screen (android on a rocket screen)?
if so, use http://forum.xda-developers.com/showthread.php?t=1626895 to go start fresh.
bk201doesntexist said:
long press VOL UP+VOL DOWN+POWER
do you see the bootloader screen (android on a rocket screen)?
if so, use http://forum.xda-developers.com/showthread.php?t=1626895 to go start fresh.
Click to expand...
Click to collapse
no,i see nothing,only camera flash.
I put it without battery in my pc and i see only omap4400(discontinued)(win 7 finds no drivers)
i have a jig for gs2 but the phone doesn't start.
what can i do?
thanks
edit: my phone is rooted with paranoid 2.21
edit: if i download and use rapidshare.com/files/1168981527/OMAPFlash_tuna.zip ?
i use http://forum.xda-developers.com/showthread.php?t=1640443
and it done the process.
now,what should i do?
thanks
What you mean by camera flash?
I suppose you disconnect your phone from your computer, then long press volume up, volume down + Power button, see if you have the bootloader screen.
Mach3.2 said:
What you mean by camera flash?
Click to expand...
Click to collapse
flash,light of the camera
» Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
» Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0x75E100003F7F // Product name
eMMC CID PRV = 0x25 // Product revision
eMMC CID PSN = 0x00003F7F // Product serial numbe
r
eMMC CID MDT = 0x3F // Manufacturing date
eMMC CID CRC = 0x3F // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification
version
eMMC CSD TAAC = 0x27 // Data read access-tim
e 1
eMMC CSD NSAC = 0x01 // Data read access-tim
e 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequ
ency
eMMC CSD CCC = 0x00F5 // Card command classes
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block
length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for r
ead allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign
ment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm
ent
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @
VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @
VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @
VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @
VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli
er
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size mul
tiplier
eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group
size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group
enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default
ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc
k length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w
rite allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a
pplication
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot
ection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot
ection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x33 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Se
ts
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase
unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase
timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write secto
r count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write
protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)
eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Perfor
mance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Perform
ance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Perfor
mance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Perform
ance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Perfor
mance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Perform
ance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MH
z at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MH
z at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MH
z at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MH
z at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure versio
n
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revisio
n
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision
eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface
timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory conten
t
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase g
roup definition
EMMC eMMC DRIVER INIT COMPLETE
» Downloading complete
» Elapsed time: 0:00.457 (103194 bytes/s)
» End loading driver
» Downloading
» Downloading 'Targets\Projects\tuna\MLO_4460_HS_PRO'
» Sending data (131072 bytes) :::::::::::::::::::: [131072]
» Downloading complete
» Elapsed time: 0:00.424 (309132 bytes/s)
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpap
i_base 0x00030400
» Downloading driver
EMMC eMMC DRIVER DEINIT COMPLETE
» Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
» Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0x75E100003F7F // Product name
eMMC CID PRV = 0x25 // Product revision
eMMC CID PSN = 0x00003F7F // Product serial numbe
r
eMMC CID MDT = 0x3F // Manufacturing date
eMMC CID CRC = 0x3F // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification
version
eMMC CSD TAAC = 0x27 // Data read access-tim
e 1
eMMC CSD NSAC = 0x01 // Data read access-tim
e 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequ
ency
eMMC CSD CCC = 0x00F5 // Card command classes
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block
length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for r
ead allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign
ment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm
ent
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @
VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @
VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @
VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @
VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli
er
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size mul
tiplier
eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group
size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group
enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default
ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc
k length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w
rite allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a
pplication
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot
ection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot
ection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x33 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Se
ts
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase
unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase
timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write secto
r count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write
protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)
eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Perfor
mance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Perform
ance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Perfor
mance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Perform
ance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Perfor
mance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Perform
ance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MH
z at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MH
z at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MH
z at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MH
z at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure versio
n
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revisio
n
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision
eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface
timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory conten
t
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase g
roup definition
EMMC eMMC DRIVER INIT COMPLETE
» Downloading complete
» Elapsed time: 0:00.416 (113365 bytes/s)
» End loading driver
» Downloading
» Downloading 'Targets\Projects\tuna\sbl.img'
» Sending data (1835008 bytes) :::::::::::::::::::: [1835008]
» Downloading complete
» Elapsed time: 0:01.569 (1223330 bytes/s)
» cold_sw_reset
» Elapsed time: 0:05.821
Premere un tasto per continuare . . .
The phone is as before,dead.
what should i do?
Add video of problem
Then i guess the next reasonable thing to do is to send it in to Samsung
will they accept it, for you?
desire
it could be hardware fault. I have similar problem with my HTC desire. After inserting battery and attempt to turn it on desire just starts to vibrate. Problem is with memory (exactly with connection memory chip to motherboard)
darkchmatak said:
it could be hardware fault. I have similar problem with my HTC desire. After inserting battery and attempt to turn it on desire just starts to vibrate. Problem is with memory (exactly with connection memory chip to motherboard)
Click to expand...
Click to collapse
thanks
Theres no errors on omapflash, try to get to booloader or download mode now.
Sent from my i9250
It is still dead
musicmix96 said:
It is still dead
Click to expand...
Click to collapse
Im having the same problem ive tried all possibilities, tomorrow im going to try a usb jig hopefully that works,
i dont want to send it to samsung; have you? and if so, did they replace your phone without charge?
¯ Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
¯ Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0x45FB0000CEFB // Product name
eMMC CID PRV = 0x25 // Product revision
eMMC CID PSN = 0x0000CEFB // Product serial numbe
r
eMMC CID MDT = 0xCE // Manufacturing date
eMMC CID CRC = 0x7D // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification
version
eMMC CSD TAAC = 0x27 // Data read access-tim
e 1
eMMC CSD NSAC = 0x01 // Data read access-tim
e 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequ
ency
eMMC CSD CCC = 0x00F5 // Card command classes
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block
length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for r
ead allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign
ment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm
ent
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @
VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @
VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @
VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @
VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli
er
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size mul
tiplier
eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group
size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group
enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default
ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc
k length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w
rite allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a
pplication
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot
ection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot
ection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x33 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Se
ts
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase
unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase
timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write secto
r count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write
protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)
eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Perfor
mance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Perform
ance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Perfor
mance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Perform
ance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Perfor
mance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Perform
ance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MH
z at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MH
z at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MH
z at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MH
z at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure versio
n
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revisio
n
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision
eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface
timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory conten
t
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase g
roup definition
EMMC eMMC DRIVER INIT COMPLETE
¯ Downloading complete
¯ Elapsed time: 0:02.031 (23580 bytes/s)
¯ End loading driver
¯ Downloading
¯ Downloading 'Targets\Projects\tuna\MLO_4460_HS_PRO'
¯ Sending data (131072 bytes) :::::::::::::::::::: [131072]
¯ Downloading complete
¯ Elapsed time: 0:00.297 (441319 bytes/s)
¯ Looking for a driver for 'EMMC'
¯ chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpap
i_base 0x00030400
¯ Downloading driver
EMMC eMMC DRIVER DEINIT COMPLETE
¯ Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
¯ Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0x45FB0000CEFB // Product name
eMMC CID PRV = 0x25 // Product revision
eMMC CID PSN = 0x0000CEFB // Product serial numbe
r
eMMC CID MDT = 0xCE // Manufacturing date
eMMC CID CRC = 0x7D // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification
version
eMMC CSD TAAC = 0x27 // Data read access-tim
e 1
eMMC CSD NSAC = 0x01 // Data read access-tim
e 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequ
ency
eMMC CSD CCC = 0x00F5 // Card command classes
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block
length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for r
ead allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign
ment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm
ent
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @
VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @
VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @
VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @
VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli
er
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size mul
tiplier
eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group
size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group
enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default
ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc
k length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w
rite allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a
pplication
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot
ection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot
ection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x33 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Se
ts
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase
unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase
timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write secto
r count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write
protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)
eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Perfor
mance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Perform
ance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Perfor
mance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Perform
ance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Perfor
mance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Perform
ance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MH
z at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MH
z at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MH
z at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MH
z at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure versio
n
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revisio
n
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision
eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface
timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory conten
t
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase g
roup definition
EMMC eMMC DRIVER INIT COMPLETE
¯ Downloading complete
¯ Elapsed time: 0:03.735 (12740 bytes/s)
¯ End loading driver
¯ Downloading
¯ Downloading 'Targets\Projects\tuna\sbl.img'
¯ Sending data (1835008 bytes) :::::::::::::::::::: [1835008]
¯ Downloading complete
¯ Elapsed time: 0:02.750 (679630 bytes/s)
¯ cold_sw_reset
¯ Elapsed time: 0:18.625
Pressione qualquer tecla para continuar. . .
But no power on, no flash mde, I connect usb cable, only driver connected omap4460 usb device
Cool story bro
Sent from my Galaxy Nexus using xda app-developers app
Cool! But what is the problem? If you give us some background we might be helpful and btw wrong thread this must be in general/q&a.
Sent from my Galaxy Nexus using xda premium
Actually I gave as a gift, but I returned it saying stopped calling, I can not tell if someone mecheu in software or noa. when I connect usb jig it, it turns into download mode, but does not flash.
turca said:
¯ Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
¯ Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0x45FB0000CEFB // Product name
eMMC CID PRV = 0x25 // Product revision
eMMC CID PSN = 0x0000CEFB // Product serial numbe
r
eMMC CID MDT = 0xCE // Manufacturing date
eMMC CID CRC = 0x7D // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification
version
eMMC CSD TAAC = 0x27 // Data read access-tim
e 1
eMMC CSD NSAC = 0x01 // Data read access-tim
e 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequ
ency
eMMC CSD CCC = 0x00F5 // Card command classes
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block
length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for r
ead allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign
ment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm
ent
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @
VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @
VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @
VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @
VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli
er
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size mul
tiplier
eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group
size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group
enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default
ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc
k length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w
rite allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a
pplication
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot
ection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot
ection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x33 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Se
ts
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase
unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase
timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write secto
r count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write
protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)
eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Perfor
mance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Perform
ance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Perfor
mance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Perform
ance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Perfor
mance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Perform
ance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MH
z at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MH
z at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MH
z at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MH
z at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure versio
n
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revisio
n
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision
eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface
timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory conten
t
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase g
roup definition
EMMC eMMC DRIVER INIT COMPLETE
¯ Downloading complete
¯ Elapsed time: 0:02.031 (23580 bytes/s)
¯ End loading driver
¯ Downloading
¯ Downloading 'Targets\Projects\tuna\MLO_4460_HS_PRO'
¯ Sending data (131072 bytes) :::::::::::::::::::: [131072]
¯ Downloading complete
¯ Elapsed time: 0:00.297 (441319 bytes/s)
¯ Looking for a driver for 'EMMC'
¯ chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpap
i_base 0x00030400
¯ Downloading driver
EMMC eMMC DRIVER DEINIT COMPLETE
¯ Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
¯ Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0x45FB0000CEFB // Product name
eMMC CID PRV = 0x25 // Product revision
eMMC CID PSN = 0x0000CEFB // Product serial numbe
r
eMMC CID MDT = 0xCE // Manufacturing date
eMMC CID CRC = 0x7D // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification
version
eMMC CSD TAAC = 0x27 // Data read access-tim
e 1
eMMC CSD NSAC = 0x01 // Data read access-tim
e 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequ
ency
eMMC CSD CCC = 0x00F5 // Card command classes
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block
length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for r
ead allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign
ment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm
ent
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @
VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @
VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @
VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @
VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli
er
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size mul
tiplier
eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group
size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group
enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default
ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc
k length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w
rite allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a
pplication
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot
ection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot
ection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x33 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Se
ts
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase
unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase
timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write secto
r count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write
protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)
eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Perfor
mance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Perform
ance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Perfor
mance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Perform
ance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Perfor
mance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Perform
ance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MH
z at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MH
z at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MH
z at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MH
z at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure versio
n
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revisio
n
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision
eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface
timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory conten
t
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase g
roup definition
EMMC eMMC DRIVER INIT COMPLETE
¯ Downloading complete
¯ Elapsed time: 0:03.735 (12740 bytes/s)
¯ End loading driver
¯ Downloading
¯ Downloading 'Targets\Projects\tuna\sbl.img'
¯ Sending data (1835008 bytes) :::::::::::::::::::: [1835008]
¯ Downloading complete
¯ Elapsed time: 0:02.750 (679630 bytes/s)
¯ cold_sw_reset
¯ Elapsed time: 0:18.625
Pressione qualquer tecla para continuar. . .
But no power on, no flash mde, I connect usb cable, only driver connected omap4460 usb device
Click to expand...
Click to collapse
Just use usB JIG AND PRESS POWER+VOL dOWN
Help me guys, any problem on my nexus 3, when i turn power on and booting end, on lock screen menu my phone has restart again, i try to flash make odin and succes,but when i reboot my phone restart again,i try again with recovery mode,wipe. Data,cache, but not fix my problem, somebody help me,
Hi guys,
Last night i was using my GNex with PA 4.0 BETA, when i was writing a message the phone has freezed (like any other times and i solved every times removing the battery and turn on) and from yesterday it won't turn up, i tried also to turn up in fastboot or to try another battery but nothing, so i thought it was an hard brick...
The only good solution that i find it's the OMAPFlash but while i'm doing this procedure i met some error...
The phone is recognized by pc, so i've installed the driver than i re-plugged the USB cable...
After that i hear the sound of deconnected hardware after many seconds, so it's impossibile to run the .bat file, the only way to make the .bat run is to launche it before i plug in the GNex. With this mode it start to compile the cmd and seems to works well
(here's the log:
» Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
» Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0x848300009F59 // Product name
eMMC CID PRV = 0x0D // Product revision
eMMC CID PSN = 0x00009F59 // Product serial numbe
r
eMMC CID MDT = 0x9F // Manufacturing date
eMMC CID CRC = 0x2C // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification
version
eMMC CSD TAAC = 0x27 // Data read access-tim
e 1
eMMC CSD NSAC = 0x01 // Data read access-tim
e 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequ
ency
eMMC CSD CCC = 0x00F5 // Card command classes
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block
length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for r
ead allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign
ment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm
ent
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @
VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @
VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @
VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @
VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli
er
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size mul
tiplier
eMMC CSD WP_GRP_SIZE = 0x1F // Write protect group
size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group
enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default
ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc
k length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w
rite allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a
pplication
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot
ection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot
ection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x03 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Se
ts
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x11 // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase
unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x10 // High-capacity erase
timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write secto
r count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write
protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)
eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Perfor
mance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Perform
ance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Perfor
mance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Perform
ance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Perfor
mance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Perform
ance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MH
z at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MH
z at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MH
z at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MH
z at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure versio
n
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revisio
n
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision
eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface
timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory conten
t
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase g
roup definition
EMMC eMMC DRIVER INIT COMPLETE
» Downloading complete
» Elapsed time: 0:00.537 (87821 bytes/s)
» End loading driver
» Downloading
» Downloading 'Targets\Projects\tuna\MLO_4460_HS_PRO'
» Sending data (131072 bytes) :::::::::::::::::::: [131072]
» Downloading complete
» Elapsed time: 0:00.197 (665340 bytes/s)
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpap
i_base 0x00030400
» Downloading driver
EMMC eMMC DRIVER DEINIT COMPLETE
» Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
» Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0x848300009F59 // Product name
eMMC CID PRV = 0x0D // Product revision
eMMC CID PSN = 0x00009F59 // Product serial numbe
r
eMMC CID MDT = 0x9F // Manufacturing date
eMMC CID CRC = 0x2C // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification
version
eMMC CSD TAAC = 0x27 // Data read access-tim
e 1
eMMC CSD NSAC = 0x01 // Data read access-tim
e 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequ
ency
eMMC CSD CCC = 0x00F5 // Card command classes
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block
length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for r
ead allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign
ment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm
ent
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @
VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @
VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @
VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @
VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli
er
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size mul
tiplier
eMMC CSD WP_GRP_SIZE = 0x1F // Write protect group
size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group
enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default
ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc
k length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w
rite allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a
pplication
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot
ection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot
ection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x03 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Se
ts
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x11 // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase
unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x10 // High-capacity erase
timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write secto
r count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write
protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)
eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Perfor
mance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Perform
ance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Perfor
mance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Perform
ance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Perfor
mance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Perform
ance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MH
z at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MH
z at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MH
z at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MH
z at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure versio
n
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revisio
n
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision
eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface
timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory conten
t
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase g
roup definition
EMMC eMMC DRIVER INIT COMPLETE
» Downloading complete
» Elapsed time: 0:00.416 (113365 bytes/s)
» End loading driver
» Downloading
» Downloading 'Targets\Projects\tuna\sbl.img'
» Sending data (1835008 bytes) :::::::::::::::::::: [1835008]
» Downloading complete
» Elapsed time: 0:01.533 (1223330 bytes/s)
» cold_sw_reset
» Elapsed time: 0:08.226
Premere un tasto per continuare . . .)
After that i do what the guide suggest, to put the battery inside and to launch it in odin or fastboot mode but neither works, so, any suggestion?
PS: Sorry for very very bad english, i hope you can find me a solution for this. Thanks
Please someone...
Email me [email protected] .
Sent from my Galaxy Nexus using Tapatalk 2
Check your inbox
Doing good on liquidsmooth rom for couple of months now. Kinda busy at work thus still stuck with quite a old version of JB Liquid smooth. Somehow, It managed to hardbrick itself without me screwing it up. Worked fine the night before, however when i woke up in the morning, booted it up and it crashed on itself. Now im stuck with a brick. Unable to boot, nor access bootloader for my recovery mode :c All my regular twrp backups wasted down the drain. Tried a power drain(remove battery and press power for 10+ secs), plug into usb power adapter then insert battery. Only landed me with a charging battery icon( with the lightning) and showing that the battery is fully charged. Was desperate and tried omap, no luck with it,seems to run sucessfully but nothing comes on the screen.Tried it with and without the battery. I understand the Gnex is a old phone but it died on itself with all my precious data. Anyone out here managed to revive their hard-bricked Gnex??? I really need some help
I have no access to any usb jig or jtag repair shops :c
Log from omaps:
» Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
» Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0x47FC00001F4F // Product name
eMMC CID PRV = 0x25 // Product revision
eMMC CID PSN = 0x00001F4F // Product serial numbe
r
eMMC CID MDT = 0x1F // Manufacturing date
eMMC CID CRC = 0x27 // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification
version
eMMC CSD TAAC = 0x27 // Data read access-tim
e 1
eMMC CSD NSAC = 0x01 // Data read access-tim
e 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequ
ency
eMMC CSD CCC = 0x00F5 // Card command classes
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block
length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for r
ead allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign
ment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm
ent
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @
VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @
VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @
VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @
VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli
er
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size mul
tiplier
eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group
size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group
enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default
ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc
k length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w
rite allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a
pplication
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot
ection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot
ection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x33 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Se
ts
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase
unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase
timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write secto
r count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write
protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)
eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Perfor
mance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Perform
ance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Perfor
mance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Perform
ance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Perfor
mance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Perform
ance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MH
z at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MH
z at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MH
z at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MH
z at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure versio
n
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revisio
n
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision
eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface
timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory conten
t
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase g
roup definition
EMMC eMMC DRIVER INIT COMPLETE
» Downloading complete
» Elapsed time: 0:00.491 (96048 bytes/s)
» End loading driver
» Downloading
» Downloading 'Targets\Projects\tuna\MLO_4460_HS_PRO'
» Sending data (131072 bytes) :::::::::::::::::::: [131072]
» Downloading complete
» Elapsed time: 0:00.273 (480117 bytes/s)
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpap
i_base 0x00030400
» Downloading driver
EMMC eMMC DRIVER DEINIT COMPLETE
» Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
» Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0x47FC00001F4F // Product name
eMMC CID PRV = 0x25 // Product revision
eMMC CID PSN = 0x00001F4F // Product serial numbe
r
eMMC CID MDT = 0x1F // Manufacturing date
eMMC CID CRC = 0x27 // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification
version
eMMC CSD TAAC = 0x27 // Data read access-tim
e 1
eMMC CSD NSAC = 0x01 // Data read access-tim
e 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequ
ency
eMMC CSD CCC = 0x00F5 // Card command classes
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block
length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for r
ead allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign
ment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm
ent
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @
VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @
VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @
VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @
VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli
er
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size mul
tiplier
eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group
size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group
enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default
ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc
k length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w
rite allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a
pplication
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot
ection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot
ection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x33 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Se
ts
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase
unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase
timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write secto
r count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write
protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)
eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Perfor
mance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Perform
ance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Perfor
mance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Perform
ance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Perfor
mance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Perform
ance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MH
z at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MH
z at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MH
z at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MH
z at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure versio
n
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revisio
n
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision
eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface
timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory conten
t
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase g
roup definition
EMMC eMMC DRIVER INIT COMPLETE
» Downloading complete
» Elapsed time: 0:00.447 (105503 bytes/s)
» End loading driver
» Downloading
» Downloading 'Targets\Projects\tuna\sbl.img'
» Sending data (1835008 bytes) :::::::::::::::::::: [1835008]
» Downloading complete
» Elapsed time: 0:02.162 (873810 bytes/s)
» cold_sw_reset
» Elapsed time: 0:09.707
Press any key to continue . . .
Reserved