Tried looking around but I haven't had much luck on this one. Since Froyo became available sometime around the 18th via the LG updater I have yet to see a way to root this thing. z4 and universal just don't work. Anyone have a method to this madness?
Note: This isn't my phone but really a work phone. The one my co workers and myself use is not really in need of root but my manager uses wifi tether like a crack addict and needs it. Right now I told him to just say no to the update since it's now being pushed via OTA.
Rooted Ally Froyo OTA update
I also have the same question kind of.. OTA Froyo update came this morning but we (my girls phone)have denied it because we use tether more than we want Flash someone Please let me know when Ally Froyo is Rooted. THX.
Well my wife has the LG Ally and since she's had it I've been playing with it. It actually took a bit to get the update to load, but once it did I realized I lost root. I didn't think much of it because I had backups, but restoring them didn't work which meant that I wasn't able to downgrade and try installing a rooted version.
I then found that I could download the Superuser app in a zip file and use it in a custom recovery to install as root.
First get the latest Superuser zip file for froyo, su-2.3.6.1-ef-signed.zip,here and put it on the root of your sdcard.
Then reboot into your recovery. The easiest way to get into the recovery is to power off the phone and then press SEND + MENU + tap END, keep tapping END until you see the LG screen. Once you see the LG screen you can let go.
Now you need to navigate through your custom recovery to use the zip file.
Amon-ra: Flash zip menu > Flash zip from sdcard > su-2.3.6.1-ef-signed.zip.
ClockWork: Install zip from sdcard > choose zip from sdcard > su-2.3.6.1-ef-signed.zip.
Once it is done loading reset and you should be good to go!
Credit goes to ChainsDD for the awesome app!
I am stuck at the reboot into recovery, since I did not have root prior to the upgrade to 2.2.1, I cannot install a custom recovery to finish this method. Any ideas? This version locks out the files I need to push to!!!
Well so far z4root no matter what version doesn't work, think it has to do with the patch they applied in 2.2.1 Superoneclick just gets stuck in a loop on rageagainstthecage so I'm at a loss. Android Forums has the long route on how to root but to be honest I know I will screw something up. Anyone have a solution? I was rooted before but I never installed a custom recovery as this a work phone.
If you turn off the phone and then plug it into the computer and hold SEND + MENU + hit END to turn it on does it stay with the screen that shows a white triangle, a !, and the android guy? If so see if you can use adb shell and have it connect with the phone. I'm not ever sure if after the update you can get into it. You can use either VOL-DOWN + HOME + tap END or the previous method. The last one should get you the bootloader and if you connect your phone here to your computer you should get a "fastboot" device installed, or something like that. If you can get here you can flash a custom recovery. I think there is a way to do it via the recovery as well. Once you can get into either of those we can get you root.
Rambler509 said:
I am stuck at the reboot into recovery, since I did not have root prior to the upgrade to 2.2.1, I cannot install a custom recovery to finish this method. Any ideas? This version locks out the files I need to push to!!!
Click to expand...
Click to collapse
try to re flash the phone with it again, if all else fails..... factory reset
lg ally wont root
Apparently I got my phone when verizon figured out a way to block all rooting apps. My LG Ally won't root using any of the suggested apps such as z4 root any version, superuser nor universal androot and I refuse 2 do that long drawn out process provided in newer manuals that's just ridiculous. We shouldn't b force 2 keep applications tht we don't want.
I didn't hv 2 update my phone it came with the 2.21 version alreayd installed. I did a factory reset twice and my phone won't work until I call verizon for them 2 reactivate it and once I do that all of the preinstall crap is already on phone as soon as its activated
It's too bad we don't have a method to root like on the Nook Color where you take a formatted SD card and boot from it...
c0ldburn3r said:
Tried looking around but I haven't had much luck on this one. Since Froyo became available sometime around the 18th via the LG updater I have yet to see a way to root this thing. z4 and universal just don't work. Anyone have a method to this madness?
Note: This isn't my phone but really a work phone. The one my co workers and myself use is not really in need of root but my manager uses wifi tether like a crack addict and needs it. Right now I told him to just say no to the update since it's now being pushed via OTA.
Click to expand...
Click to collapse
I haven't figured out how to re-root yet but I did find a suggestion somewhere in a forum that worked for tethering. Download the Quick Settings app (with the green gear icon) from the market and it gives you and option to turn on wifi hotspot without rooting. It'll bypass the fee Verizon charges while using the app they added in Froyo.
allywrecked said:
I refuse 2 do that long drawn out process provided in newer manuals that's just ridiculous. We shouldn't b force 2 keep applications tht we don't want.
Click to expand...
Click to collapse
While I agree that we should not have to keep apps on our devices that we do want or intend to use-if you want them gone-you MUST follow the "long drawn out process" to root the device and remove those apps. Otherwise-just deal with the apps being there.
JL
Also having issues
Having problems with z4mod application also. I tried rooting it with/without SD card in, connected/disconnected from the computer. The app runs, but it gets as far as "acquiring root shell" and then goes back to my home screen. No superuser app or busybox. I even tried installing busybox from the market and it just says Phone not rooted. Its kinda aggravating me. I'm kinda tired of tethering because of the net timeouts. Can't chat on IRC.
Android vers: 2.2.1
Related
Hey guys. I'm pretty tech savy when it comes to computers and all, but for some reason all this "root", "radio", etc. is all mish mosh to me. I'm pretty sure I have my phone rooted (followed a tutorial). I just got the prompt for froyo from Verizon, and I read somewhere i shouldn't install it from Verizon if my phone was rooted. What I want is to just reset my phone without the root, and be able to install 2.2 just as if I never rooted my phone, because I know I'm going to screw something up that's going to end up costing me. So any help??
you sound like me a few months ago
The OTA will update your OS to 2.2 and will update your radio along with alot of other things.
If you hold optical button and power at the same time (after the phone is off) it will boot to the Hboot screen. on the top of that screen you will see S-ON. This is the security toggle for the phone. I cant tell you what or why it does what it does. but it essentially makes its so you cant flash custom roms without rooting. Before you update your phone to the OTA, you want to google "unrevoked3" . download it, and run it. This will give you the Clock Work Recovery which will load instead of the phones built in recovery console. as soon as you do that, then you run "unrevoked forever" this will set the phone to S-OFF.
once you get S-OFF. Revert your phone back to stock by updating with a stock pb31gm.zip (you should be able to find that all over). this will make your phone stock again (by removing the root you did to it by running unrevoked3) but keep the S-oFF setting.
so by the end of the process you will be totally stock, no root, and have S-OFF. then boot up, install OTA, and then load the update with clock work recovery and you will be all set.
its all kinda confusing if you dont read along the forums. but once you get it, its pretty simple.
Another poster in another thread already addressed this. here it is in simplistic form
use google to look up anything you dont understand.
Assuming you have a truly stock Incredible (meaning you didn't force any third party roms or leaked radios), then you follow this order:
1. Unrevoked Flash/Recovery - Adds Clockwork Mod and Superuser permissions to your phone
2. Unrevoked Forever - Adds S-OFF functionality, which means that the HBOOT startup will no longer check for updates that are signed with HTC's super secret signature... Meaning you can flash anything to the phone.
3. Flash Original Stock Recovery - Removes the Clockwork Mod recovery console. Since you have S-OFF, you can return CWM to the phone whenever you damn well please. The original stock recovery is necessary for the OTA to commence, because it is developed to rely on the stock recovery console.
4. Wait for OTA
5. Upon receiving OTA, flash Clockwork Mod to the phone via HBOOT (using a PB31IMG.zip containing it)
6. Flash the root payload via Clockword Mod recovery console.
7. Go to bed and make love to your wife after beating on your chest in victory like tarzan.
8. Reboot phone, bask in Official Froyo coupled with Superuser permissions.
9. Download the busybox installer from the market and install busybox to the system.
10. Make love to your wife again.
Keyboards said:
Hey guys. I'm pretty tech savy when it comes to computers and all, but for some reason all this "root", "radio", etc. is all mish mosh to me. I'm pretty sure I have my phone rooted (followed a tutorial). I just got the prompt for froyo from Verizon, and I read somewhere i shouldn't install it from Verizon if my phone was rooted. What I want is to just reset my phone without the root, and be able to install 2.2 just as if I never rooted my phone, because I know I'm going to screw something up that's going to end up costing me. So any help??
Click to expand...
Click to collapse
I didnt read your post all the way before i responded... sorry
since you are rooted already, just get unrevoked forever to get S-off.
your rooted and you got the OTA , so that answers some questions for people right there, there has been much confusion about rooted phones will get the update. I guess you did
People say not to update because it will remove your root and not allow you to re-root. By flashing S-OFF you can re-root anytime you please because the phones security check is off.
The problem is, you need root to get S-off. If you flash first, with S-ON you wont be able to re-root to get S-off, make sense? lol. At this point in the game you can only get S-off while using 2.1. if you got to 2.2 with s-on your stuck for a while with no root.
If that doesnt matter to you, then dont worry about it
If you only rooted your phone and did nothing else, you can safely apply the update. Doing so will remove root.
If you installed a custom recovery you will wanted to install the stock recovery before doing the upgrade.
If you plan on keeping root you will need to install unrevoked forever to enable security off (S-OFF) before starting the upgrade process.
Hope that helps a little anyway.
I never did anything to the phone after the root. The only thing that changed on the phone was superuser was put on my app screen, and I don't even know what that does. I don't care for root that much anymore, it sounded cool, but I'm not the kind of person who knows how to use it to it's full potential. So all I have to do is hit install now on the 2.2 from Verizon and I should be good to go?
Keyboards said:
I never did anything to the phone after the root. The only thing that changed on the phone was superuser was put on my app screen, and I don't even know what that does. I don't care for root that much anymore, it sounded cool, but I'm not the kind of person who knows how to use it to it's full potential. So all I have to do is hit install now on the 2.2 from Verizon and I should be good to go?
Click to expand...
Click to collapse
well you will have to run a stock pb31img.zip to remove the clockwork recovery , or the update will fail
lemme look around and see if i can find you a stock image. 1 sec
here it is
http://d01.megashares.com/index.php?d01=CHoQD3B
once you get it downloaded, you need to rename it to PB31IMG.zip, place it on the root of your SD card (meaning dump it on the sd card , not in a folder on the SD card)
hold optical button and power button until you get the hboot screen
with "bootloader" selected hit the power button to select it
the phone will look for the PB31IMG.zip file and load it. wait a few min and when it asks you to reboot, say yes. It may or may not ask you to update again , if it does, say yes, if not let it reboot the phone.
once that is done, run the OTA update you got and your all set.
doing this will retain your stock image, and remove root. THIS WILL WIPE YOUR PHONE. so if you have anything you wanna save do it before you proceed
msticlaru said:
doing this will retain your stock image, and remove root. THIS WILL WIPE YOUR PHONE. so if you have anything you wanna save do it before you proceed
Click to expand...
Click to collapse
Thank you. Will my Market history remain?? Meaning if I bought an app, I can just redownload it??
Keyboards said:
Thank you. Will my Market history remain?? Meaning if I bought an app, I can just redownload it??
Click to expand...
Click to collapse
yup, anything you bought is saved to your google account. you just open the market, hit menu, and then hit "downloaded" and its all there
msticlaru said:
yup, anything you bought is saved to your google account. you just open the market, hit menu, and then hit "downloaded" and its all there
Click to expand...
Click to collapse
That's great, thanks again. I'm going to give it a shot now.
Keyboards said:
That's great, thanks again. I'm going to give it a shot now.
Click to expand...
Click to collapse
Ok I did it and it looks like it's going smooth! One thing I noticed is that after I formatted my card to FAT32, it said my capacity was only 200MB? Is this normal?
It's a 16GB card.
Keyboards said:
Ok I did it and it looks like it's going smooth! One thing I noticed is that after I formatted my card to FAT32, it said my capacity was only 200MB? Is this normal?
It's a 16GB card.
Click to expand...
Click to collapse
interesting... windows says its 200mb or the phone does? see what it says after the update. Maybe it created a 200mb partition?
msticlaru said:
interesting... windows says its 200mb or the phone does? see what it says after the update. Maybe it created a 200mb partition?
Click to expand...
Click to collapse
Phone also says 200MB. Phone is back to stock and ready to roll. Still haven't recieved a prompt for froyo yet, checked about phone, still running 2.1 update 1.
Keyboards said:
Phone also says 200MB. Phone is back to stock and ready to roll. Still haven't recieved a prompt for froyo yet, checked about phone, still running 2.1 update 1.
Click to expand...
Click to collapse
I think i read somewhere that when you don't accept the update it will wait like 20 min or so before it prompts you again. I don't know the exact time limit tho. you could do the *228 update just to make sure its registered right. i don't really know if that will help push the update or not.. but may as well do it.
as far as the card. after the update try formating it again. kinda of an odd issue. could try googling it
msticlaru said:
I think i read somewhere that when you don't accept the update it will wait like 20 min or so before it prompts you again. I don't know the exact time limit tho. you could do the *228 update just to make sure its registered right. i don't really know if that will help push the update or not.. but may as well do it.
as far as the card. after the update try formating it again. kinda of an odd issue. could try googling it
Click to expand...
Click to collapse
Still no prompt. Restarted, did *228, nothing. This card problem is also an issue now. It's showing only 200MB on Mac, PC, and the Incredible.
Keyboards said:
Still no prompt. Restarted, did *228, nothing. This card problem is also an issue now. It's showing only 200MB on Mac, PC, and the Incredible.
Click to expand...
Click to collapse
as far as not getting the prompt, you got me. I cant pretend to know how verizon does their business. Their website says if you ignore the update, it will continue to big you until you get it.
As far as the memory card goes. Thats not really a phone issue. My experience with formatting memory cards stops at the format. Never had it format it wrong. If it was happening to me, i would format it again with a format tool. I dont know your experience when it comes to troubleshooting problems like this. I would start by using multiple format tools on my PC, you said you have a mac, you can try formatting it with the mac. It seems like a simple fix, as it was reporting the right size prior to the format.
Did you format it in windows? did you just right click on it and hit "format" ? try using the disc management built into windows. It should show you the total size of the disc formatted or not. Its possible it somehow was formated as a 200MB partition. if that happened, then you have a 200MB logical partition, and the rest is unformatted and therefor un readable by anything other than a disc management type tool.
depending on your Operating System, your mileage will vary, but google how to open "disc management" for your OS. Stick the SD card in your card reader, then use the tools in disc management to format it to the correct size.
hope that helps.
Also, check your phone. settings > about phone > system information. Ensure you are running 2.1 update 1. and baseband 1.x. If you are, then its a waiting game. also, in the same screen click on "system update" and see if it has an update available. if not... you can always call verizon and play dumb. "ya i got the update, but i had to reboot my phone, when it booted back up i didnt have the update anymore!" see if maybe they can push it to you.
if all else fails you can load the RUU manually.
I'm using the stock ROM rooted (don't know who distributed this one) and I'm getting a T-Mobile Update Service New Firmware Is Available message.
How do I not make this pop-up every day? Is the procedure different for each ROM? I thought most, if not all custom ROMs blocked these updates by default.
Searched but couldn't find a solution. Thanks.
For me it got to a point where I wasn't allowed to click cancel. I had to click download and after it downloaded it rebooted the phone and went to the flashing screen. Of course, not wanting to lose root, I didn't want it to apply. So I held down the Power button on the top of the phone and the update did not apply, but I would suggest you do it quick because it's not a very large update to apply. I don't know if the Power button to cancel an update is a real thing or if it just happened to work with me. But after I booted up my phone, the update notice was gone and I was worried that I had lost root as well, but I still have superuser permissions.
Go into Applications/ running services/ kill Htc Update and Tmobile update
Gets rid of it most of the time until reboot.
Anyone know how to make it not come up after rebooting? mines at the same point with the not letting me postpone but I rather not risk it and update and postpone
I'm assuming you guys are on SMR5 or 5r1...all you hafta do is get CR's OTA mod, its basically SMR5r1 with the OTA incorporated into it, so you'll never get that notfication cus you'll already have the OTA, and still have root and a2sd on the latest stock espresso. Plus bootanims work!
-BMFC
Sent from my T-Mobile myTouch 3G Slide using XDA App
by stock ROM rooted I thought he ment just that . the stock rom rooted ..meaning we just did the first root process ever and didnt flash anything over that
try updating the radio (check 3rd post in the slide rom bible; its the 8-5-10 one), that might work
there is also a new OTA coming up so there might be a new radio with that.
to flash radio... dload and put into sd card. boot into clockwork. DO A NANDROID BACKUP. then "apply to sd card". install zip from sd. click the zip for radio. install and reboot. there'll be an awkward image before reboot (normal).
also, next time PLEASE use the Q&A section.
Hi,
I have my DHD root for some time and I followed instructions to retain root when I did the OTA in December. Since then I had many issues with superuser so i found a version that works correctly.
I decided to install and try Rom Manager to update my recovery to the latest.
Rom Manager opens, but at the prompt, it will not allow me to select OK to continue. I can cancel fine, so its not crashed/hung.
Is this the app not requesting root access in the same way as other apps?
Fastboot and busybox all work correctly with superuser.
Any help?
Anyone got any ideas?
I even installed fresh, LeeDroid last night and still it wont let me select OK to go in to ROM Manager?
Maybe something on my SD card?
CodeJACK said:
Hi,
I have my DHD root for some time and I followed instructions to retain root when I did the OTA in December. Since then I had many issues with superuser so i found a version that works correctly.
I decided to install and try Rom Manager to update my recovery to the latest.
Rom Manager opens, but at the prompt, it will not allow me to select OK to continue. I can cancel fine, so its not crashed/hung.
Is this the app not requesting root access in the same way as other apps?
Fastboot and busybox all work correctly with superuser.
Any help?
Click to expand...
Click to collapse
You are better off without the latest version of CWM if you have no plans of flashing CM7.
Damn, I just purchased the full Rom Manager in the hope that it would work.
What a waste of 4 Euro.
So I guess I wanted it for the ease of ability to manage ROM's as i use my phone more as a gadget rather than a phone. I like messing with all the great work chefs produce
Ill continue to flash via clockwork recovery and continue to upgrade clockwork recovery with the SDK.
I have a 16Gb Class 10 card on the way so when it arrives, ill do a full wipe and flash with a blank card to see what i get.
Any other suggestions greatly appreciated.
Going to bring this post back up as i was wondering if anyone had anything similar since?
I have gone totally back to stock now and done a fresh root and Eng and radio s-off but still Rom Manager opens but wont let me slect OK to continue.
I think its almost cetainly related to root access as I'm not able to choose allow when apps pop up requesting root. i have to deny them, close the app, then swap them to allow in Superuser and then run them again!
This is a real pain in my ass at the moment.
Is your superuser the latest version?
Yeah, have tried both the one in ChainsDD's thread which I know is very old.
Also tried the patched version that works properly with the later froyo build.
Have tried flashing LeeDroid and Revolution ROM's but still the same problem persists.
I went back to stock today, thinking it might have been a step i missed/screwed up. Still this problem persists.
I'm stumped. Could it be some hardware issue?
Well Damn crap n balls to it anyway!
Turns out after all this time, all I had to do was touch the search button at the bottom right of my HD to bypass the disclaimer of Rom manager.
I feel so dumb now. Still having issue with superuser allow button but I can work around that for now.
Sent from my Desire HD using XDA Premium App
Disclaimer: This worked on my phone. I am not responsible if your phone turns into an expensive brick.
I know this isn't quite the update everyone was waiting for I managed to pull the 2.3.6 OTA files. I also managed to figure out how to flash them. Turns out CWM 5 offers root adb access, everything we need to update and root this phone. Note I tried CWM 6 but it said "possible loss of root" so apparently CWM 6 likes to reside on an already rooted phone.
Note this is not the most elegant solution. The most elegant would be a signed update.zip. The second most elegant would be something flashable with CWM or Odin. Too bad I don't know how to do those. I do know how to do this.
The first thing to do is make sure you are on the AT&T stock firmware. It doesn't matter if you've already flashed something else. No need to wipe cache or factory reset or anything (although if you run into problems you should try to do that step). Download it from samfirmware.com. Flash it with Odin. This will put you on stock 2.3.5. Even if you were already on 2.3.6, or rooted, or on Rogers, this will work. After the flash, boot the phone normally, wait a minute or so, and shut it down.
Now for the fun part. AT&T will not push the OTA to a non AT&T customer. The flash will also not work with a modified phone (hence the reflash to stock). How to gain root access to manually flash the OTA? If we install root, it will not install. If we install CWM, we will not have the stock recovery which is required to process the OTA. So...
How about this? We install CWM 5. You can find it here http://forum.xda-developers.com/showthread.php?t=1458153
Then we adb into the phone, and push the OTA files, and then reflash the stock recovery over CWM, and then manually reboot into OTA mode. That sounds crazy... crazy enough to work.
After you've flashed CWM, reboot into it and make sure your phone is still connected to your computer. We won't actually be using CWM, just the root access it provides over adb. Unzip the two zip files below (why use external hosting, I can store zips up to 11 MB on here) into a folder and run fota.bat. Ooo and ahh over your Gingerbread.
But what about root? Well, I posted in another thread a complicated method for rooting 2.3.6 using the root access from CWM, but how about easy? Boot your phone into 2.3.6 and let it sit for a minute or so, and shut it down. Reboot into Odin mode, and reflash CWM over the stock recovery (again). Copy the Superuser zip from the folder you made earlier to your SD card. Flash this with CWM. This is the beta of Superuser 3.2, courtesy of Rom Manager. Download the stericson busybox app from the Market if you want busybox as well.
This was a fun way to kill a weekend
Throws a signature verification failed error.
Try again with the new method
Had a few mild scares. After flashing CWM on stock, it refused to boot into it but after 3 tries and my screen acting up upon boot, it finally booted into CWM. Launched the bat file and it went well. Upon booting up and entering the update process, it froze up at 74% and refused to continue. Rebooted the phone and it once again entered the update process and this time it managed to finish. Phone rebooted and after checking "About phone", my phone is on 2.3.6 stock. When you initially provided the OTA files and the sig check failed, I had a good feeling this would be the only other way to do it as I tried to sign it and it also failed. Thanks for taking the time to post all of this.
Why go to 2.3.6? It´s better than 2.3.5 customized?
Better question: we're getting ICS within the month, so why bother with 2.3.6 when you can just upgrade to 4.x.x when it comes down?
-Ara
AraDreamer said:
Better question: we're getting ICS within the month, so why bother with 2.3.6 when you can just upgrade to 4.x.x when it comes down?
-Ara
Click to expand...
Click to collapse
Because there are some people who will want to stick with 2.3.5/6 . He made this so that those who do, can update to 2.3.6 even when they aren't with AT&T, almost hassle free.
narume said:
Had a few mild scares. After flashing CWM on stock, it refused to boot into it but after 3 tries and my screen acting up upon boot, it finally booted into CWM. Launched the bat file and it went well. Upon booting up and entering the update process, it froze up at 74% and refused to continue. Rebooted the phone and it once again entered the update process and this time it managed to finish. Phone rebooted and after checking "About phone", my phone is on 2.3.6 stock. When you initially provided the OTA files and the sig check failed, I had a good feeling this would be the only other way to do it as I tried to sign it and it also failed. Thanks for taking the time to post all of this.
Click to expand...
Click to collapse
When I was testing this, I saw that behavior if you didn't completely boot up the phone between steps (ie, flash stock firmware, boot phone, flash CWM, boot phone). I don't know what would cause it otherwise. Glad to see your phone made it.
narume said:
Because there are some people who will want to stick with 2.3.5/6 . He made this so that those who do, can update to 2.3.6 even when they aren't with AT&T, almost hassle free.
Click to expand...
Click to collapse
Actually I did it because I've owned this phone for exactly two weeks and discovered all the available ROMs are based on 2.3.5 even though 2.3.6 has been out since December. CWMR with root has been out since January, and since then nobody else has rooted 2.3.6 or found a way to flash it. And I thought, it couldn't be that hard? And even more amazed when I discovered CWMR comes with root out of the box, without even touching /system. The only other missing piece was the stock recovery, which also wasn't out in the wild. 3 birds for one stone
On a side note, if you want to do some cleaning after the OTA and you decide to root, you can delete /cache/fota and /data/fota safely.
Nardholio said:
Actually I did it because I've owned this phone for exactly two weeks and discovered all the available ROMs are based on 2.3.5 even though 2.3.6 has been out since December. CWMR with root has been out since January, and since then nobody else has rooted 2.3.6 or found a way to flash it. And I thought, it couldn't be that hard? And even more amazed when I discovered CWMR comes with root out of the box, without even touching /system. The only other missing piece was the stock recovery, which also wasn't out in the wild. 3 birds for one stone
On a side note, if you want to do some cleaning after the OTA and you decide to root, you can delete /cache/fota and /data/fota safely.
Click to expand...
Click to collapse
Ah, I see. Well, still, being able to flash to 2.3.6 is nice because if anyone ever decides to stick with 2.3.6 they can easily flash the update now. Maybe more people like you will pop up and start pushing out more useful content like this for the Glide so it won't be a dead area of development anymore.
I'm sure this has been addressed but I can't seem to find a definitive answer. I am bone stock (stock recovery and no custom rom) with just root on AT&T.
There are no missing deleted apps, as I replaced them previously but I still have never been able to do any of the OTA updates. It's starts and then fails.
Is there a way to unroot and the do an OTA update? I am trying to avoid Odin so I dont have to wipe everything and then have to start all over and adjust settings to my liking an also reinstall all of my apps.
I seen there is an option in the Super User app to "completely unroot and uninstall". Will choosing this option allow me to finally do OTA?
I've never installed a custom recovery or a custom rom so I don't know why OTA's always fail. At this point, I dont really care about having root since the only reason I previously wanted it was to remove at&t bloatware but I'd rather have OTA's at this point.
Any advice or direction would be greatly appreciated! Please speak slowly and in layman's terms as I am an old fart that is still a bit of a n00b, lol.
Thanks!!
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
n01un0 said:
I'm sure this has been addressed but I can't seem to find a definitive answer. I am bone stock (stock recovery and no custom rom) with just root on AT&T.
There are no missing deleted apps, as I replaced them previously but I still have never been able to do any of the OTA updates. It's starts and then fails.
Is there a way to unroot and the do an OTA update? I am trying to avoid Odin so I dont have to wipe everything and then have to start all over and adjust settings to my liking an also reinstall all of my apps.
I seen there is an option in the Super User app to "completely unroot and uninstall". Will choosing this option allow me to finally do OTA?
I've never installed a custom recovery or a custom rom so I don't know why OTA's always fail. At this point, I dont really care about having root since the only reason I previously wanted it was to remove at&t bloatware but I'd rather have OTA's at this point.
Any advice or direction would be greatly appreciated! Please speak slowly and in layman's terms as I am an old fart that is still a bit of a n00b, lol.
Thanks!!
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
If you are on stock and have a valid AT&T SIM card in the device with full access to Wi-Fi and the AT&T network, you should be able to get an OTA update. Root could, however, indeed prevent an OTA update so your best bet may be to unroot. You could unroot and uninstall SuperSU from the SuperSU app just as you suggested. This should do it. However, if it doesn't and you would really want to avoid Odin and custom recovery, then you could do a 2-step manual update to 4.3 via stock recovery - first to 4.1.2 and then to 4.3. This will naturally update your phone to (full) stock 4.3 and we can then see if the phone will take the Kit-Kat OTA update from there.
You can see the instructions for the 2-step update via stock recovery in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2387423
1) Download the 2 zip files under update412.zip and update43.zip respectively to your computer
2) Copy the zip files to a good quality (micro) SD card
3) Place the card in your phone and boot to recovery mode by simultaneously holding down the Volume Up, Home and Power buttons
4) Hold the buttons until you see a blue message flash across the screen. Then release the Power button but continue to hold the Volume Up and Home button until you see the Android image appear. Then release the buttons
5) Use the volume up/down key to scroll to <mount from external storage> and the power button to select
6) Navigate to the first zip file (update412.zip) and install. Wait for installation to finish and your phone to reboot.
7) Complete set up. Check your phone settings. Then power off and reboot to recovery again.
8) Repeat the process for the second update file.
Well I tried the unroot feature in SuperSU and then uninstalled it.
I then tried the OTA update again and as usual, it failed about 30-40% in.
Ive never installed a custom recovery or a ROM so I don't get it. All I did was use Mr.Robinsons thread/directions on "how to root without tripping...." just for root only in the sticky.
I give up.:banghead:
Thank you though for responding. I may try the alternative way you suggested when I get time tomorrow and see what happens. Either that or screw it, im stuck with 4.1.1 and now I don't even have root. :banghead:
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
n01un0 said:
Well I tried the unroot feature in SuperSU and then uninstalled it.
I then tried the OTA update again and as usual, it failed about 30-40% in.
Ive never installed a custom recovery or a ROM so I don't get it. All I did was use Mr.Robinsons thread/directions on "how to root without tripping...." just for root only in the sticky.
I give up.:banghead:
Thank you though for responding. I may try the alternative way you suggested when I get time tomorrow and see what happens. Either that or screw it, im stuck with 4.1.1 and now I don't even have root. :banghead:
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
There have been several reports of failed OTA update so you may not be alone here. The process I advised is sure to take you to 4.3 JB without hassle. There is, of course, a manual update process from 4.3JB to 4.4.2 Kit-Kat (the latest OS). You will, however, require custom recovery for this ...
http://forum.xda-developers.com/showthread.php?t=2788357
Larry2999 said:
There have been several reports of failed OTA update so you may not be alone here. The process I advised is sure to take you to 4.3 JB without hassle. There is, of course, a manual update process from 4.3JB to 4.4.2 Kit-Kat (the latest OS). You will, however, require custom recovery for this ...
http://forum.xda-developers.com/showthread.php?t=2788357
Click to expand...
Click to collapse
Well I finally was able to update via OTA. I had to actually use Kies and reinstall firmware and then go through all the updates, starting from scratch and took forever. What an absolute pain in the ass. Plus, after all this work to go from 4.1 to 4.4..........I can't see where it was worth it. I am now going through the tedious task of setting up all the settings and widgets and everything else the way it was or the way I like. So much for Kies actually backing up and "restoring" anything.
I have a couple of questions though....
1. Now that I am on 4.4..........how do I root this version (that works). I was reading the thread saying to use towelroot but it's not confirmed if this is still working after I guess you do the OTA after a certain date and it's now patched. I DO NOT want to install custom roms or anything else. All I want is root so that I can remove the AT&T crapware that is now even worse with this phone on 4.4.
2. I have a battery percentage that is in the LEFT upper corner that I can not figure out what program or app it is associated with and I can not get rid of it. This is not the % indicator that is part of Android and next to the battery icon on the right which is on and is okay, this is one the left.
3. I hate the new PIN lockscreen because the keypad/numbers are so small compared to old version. Any way to fix this?
n01un0 said:
Well I finally was able to update via OTA. I had to actually use Kies and reinstall firmware and then go through all the updates, starting from scratch and took forever. What an absolute pain in the ass. Plus, after all this work to go from 4.1 to 4.4..........I can't see where it was worth it. I am now going through the tedious task of setting up all the settings and widgets and everything else the way it was or the way I like. So much for Kies actually backing up and "restoring" anything.
I have a couple of questions though....
1. Now that I am on 4.4..........how do I root this version (that works). I was reading the thread saying to use towelroot but it's not confirmed if this is still working after I guess you do the OTA after a certain date and it's now patched. I DO NOT want to install custom roms or anything else. All I want is root so that I can remove the AT&T crapware that is now even worse with this phone on 4.4.
2. I have a battery percentage that is in the LEFT upper corner that I can not figure out what program or app it is associated with and I can not get rid of it. This is not the % indicator that is part of Android and next to the battery icon on the right which is on and is okay, this is one the left.
3. I hate the new PIN lockscreen because the keypad/numbers are so small compared to old version. Any way to fix this?
Click to expand...
Click to collapse
Glad to know you were finally able to update. To try to answer your questions ....
1. Towelroot indeed comes well recommended for rooting on Kit Kat. You could, however, first try CF Auto Root which is one of the simplest approaches to rooting. If this doesn't work, you could try Option 2 in the thread below ... The thread also contains instructions to CF Auto Root.
http://forum.xda-developers.com/showthread.php?t=2538991
2. I'm not sure what that battery indicator is. I run 4.4.2 also on my S3 but I cant see this. Can you try a reset to see if it would go away?
3. You can try removing this from settings.
Im glad you asked this...
I too noticed Im on 4.1.1 stock but rooted. I wondered if you could go to 4.4.2 as my phone tried to OTA update on its own last week and failed. I did not know if it was worth it to try or not another way. About the only thing I see that would want me to try is Google Wallet now working with S3 on 4.4.2 without having to jump through all kinds of hoops, mine used to work fine, but now GW will not open up all the way. Im not sure its worth doing if I have to re setup all my crap as I will be upgrading my phone whenever I want, just holding out to see if the Nexus 6 will be out end of the year and on AT&T..Im not liking that all the new phones are getting so freakin big, the S3 is just right and I dont want to have to end up with a damn Note sized phone but that is a whole other discussion
If you're still on 4.1.1, BEFORE ANYTHING ELSE, UNLOCK YOUR PHONE IF HASN'T ALREADY
otherwise you'll regret it
then the rest, tbh, you don't need to unroot at all to upgrade, just flash the firmware in ODIN or recovery..
edit: nvm it seems like you've already upgrade yours to KitKat