Original Thread Here
http://goo.gl/UA7CZ
Please Remember this is Test Beta and will have bugs.. its not a stable Release
Hello,
Here is the beta3 version of the upcoming CM 7.0.0 for HTC Hero GSM based on Gingerbread (android 2.3.2).
Download CM7 Beta3:
http://www.4shared.com/file/goHWiyZ6/update-cm-700-Beta3-Hero-signe.html
Gapps:
gapps-gb-20110120-signed.zip from here http://goo-inside.me/google-apps/
ADD ONS by other Devs - added at end of post
1. Smoother Graphics Zip by l0st.prophet (NEW)
2. Updated the status bar and other icons, radio buttons, check boxes etc. for CM7
Note
- Before flashing make sure you do a total wipe data/cache wipe (expect if coming from beta1)
- over-clocking at 748 freezes the device for me, 710 is ok using smartass governor
Testers needed:
As I do not have a HTC Hero under my hand every time, I need testers to report back on each new build (along with a logcat, for each report). Follow me on Twitter http://twitter.com/loxdev
Please carefully read the thread and especially the first post to not report the same bugs every-time
Status:
- Camera: YES (by steelbytes)
- Sensors: YES (need tuning thought)
- USB Mount as mass storage: YES (but if you boot usb cable pluged it won't. Then unplug and plug back the cable)
- USB Tethering: YES (but won't turn off)
- Build in internet call: YES (well the option is here, need testing)
- GPS: YES
- Hudge APN list: YES
- Trackball: YES
- Bluetooth: YES
- Hardware keys: YES
- Wifi: YES
- Sound: YES
- EGL: YES (OpenGL ES 1.1-CM tweak by Elelinux)
- GSM network: YES
- 3G/GPRS/Edge: YES
Changelog (commits log on git hub):
o 30-01-2011 beta3:
- Fixes USB mount
- Better light sensors behavior
- FlyKernel 12-a from Erasmux
- All CyanogenMod enhancements since last release
o 27-01-2011 beta2:
- Fixes Phone's FC
(because of the recent implementation of the rotary incoming all widget)
o 26-01-2011 :
- Sensors, GPS, Camera, OpenGL ES 1.1-CM
- All CyanogneMod enhancements: Cmparts, DSPmanager, Theme chooser etc.
o 24-12-2010 - Wifi should be fixed now
o 23-12-2010 - First build
Contribute
Contribute through Gerrit: http://review.cyanogenmod.com
1. l0st.Prophet ---
If you want smoother graphics I have created an update zip. Cleans up the following:
Wi-Fi Strength
Signal Strength
Connection Speed
Alarm Notification
Bluetooth Notification
Checkboxes & Radio Buttons
Attached Files
http://forum.xda-developers.com/attachment.php?attachmentid=501395&d=1296144910
2. Cortiis ---
Updated the status bar and other icons, radio buttons, check boxes etc. for CM7
Don't beat me if something goes wrong . I tested them on my Hero and they work fine.
Flashable zip: http://www.mediafire.com/?bagq4uok84b82ee
Restore CM icons: http://www.mediafire.com/?64gz7189t51uyne
I only just put cronos 0.0.9 on...
Should I give this a go?
Cronos is a bit slow. How's the speed on this one?
Progress!
I'm downloading now
There's no funny screen off animaton ;(
Is flykernel 12a supported?
Wooo! Im gonna try this out right away
Internet calling is working! !
I did it get it to work on cronos gb rom.
Sent from my HTC Hero using Tapatalk
I second what dkelley said. Also I'd like to add that drawables look like triple **** in this version.
wow LoL... from lox's cm website link:
"Note
- Before flashing make sure you do a total wipe data/cache wipe
- overclocking at 748 freezes the device for me, 710 is ok using smartass governor"
well duh
don't try that at home guys - keep it in the 651 or 691 top speed are for most people please or your phone will not like you in the morning.
If I remember correctly lox's phone (well, assuming his girlfriend's phone that he tests this stuff on is his old phone) is one of those freaky 748-safe phones. If that's true then what he's saying here is that it's not able to run at his max clock speed. and if that's true and your own phone can often run stably @ 710, then you might find that you need to run @ 691 or lower with this rom.
that certainly coincides with my experience with cgb and with most froyo roms using the 2.2 JIT engine.
I'd hate to read about a bunch of phone lockups because they followed the OP's cpu speed comments on their own phones.
arnoslag said:
Internet calling is working! !
I did it get it to work on cronos gb rom.
Sent from my HTC Hero using Tapatalk
Click to expand...
Click to collapse
well that's good to hear
Progress - indeed. I think he said that this feature was untested but listed it as working - which probably means that it works in other builds so he hoped it would work. Maybe I'm wrong - but I'm sure he'll be happy to read that it works!
This thread is not a general, "air your gripes" thread.
Can we discuss solely the ROM mentioned in the OP, and keep on topic, please folks...
3D gallery is missing. Is there a way to add it?
Good work MODERATOR. Ok, some reviews here. Despite my apparent dislike for what Lox did, this ROM looks good if not as good as some other GB ROMs I have tried, you know which ones.
theodore80 said:
3D gallery is missing. Is there a way to add it?
Click to expand...
Click to collapse
It is in the market:
http://www.appbrain.com/app/gallery-3d/com.cooliris.media
rom works fine for me so far. is there app2sd in this as its not working for me
Cortiis said:
Good work MODERATOR. Ok, some reviews here. This ROM is crap compared to other GB ROMs I have tried. Hope they are able to grab some more code from somewhere to improve it soon. Will give it a shot then
Click to expand...
Click to collapse
Worked out of the box, don't see many differences with cronos 0.0.9, except that sip calling works fine, the icons are tuned a bit better, skinning works, power widget was modified with new icons, more cm options are available. The disadvantage of CM7 beta 1 is that there is no apps2sd, but i'm sure that can be added quite easily in a rom based upon it.
The real fix still to arrive for any hero 2.3 rom is the general speed and smoothness in launcherpro/menu's and for the animations to work fine I guess. So far I prefer this cm7 release because of the little tweaks and improvements that cm7 brings.
Yeah, it looks stable and fast!
This is more buggy than Cronos Ginger 0.0.9 already 2 resarts and wifi is buggy im going back to Cronos Ginger
Sent from my HTC Hero using Tapatalk
Arranmc182 said:
This is more buggy than Cronos Ginger 0.0.9 already 2 resarts and wifi is buggy im going back to Cronos Ginger
Sent from my HTC Hero using Tapatalk
Click to expand...
Click to collapse
Have been playing music for two hours, recovering apps, installing stuff and it's been rock solid for me at 633mhz.
When i try to make a call, i get this error: The process com.android.phone has stopped unexpectedly. Please try again
Solution???
Related
This is my port of Cyanogen's latest Eclair build, v5.07-stable.
It is basically mssmison's 5.07-test3 build updated, I used the same process he did to port this one.
Included Apps:
-Connectbot
-Astro
-RogueTools
-LinPack
-HomeSwitcher
Notes:
-No major problems found so far (besides Eclair-specific problems like the Camera not working).
-Speed is comparable to other Eclair builds, maybe even a bit zippier at times.
-It should be fully compatible with any themes/mods made for Cyanogenmod v5.07-stable. (Although my attempt at flashing this theme sent my phone into an "android.power wakeup" loop, so be cautious!)
--Darkstar theme isn't working either, thx for trying @thebulletfromhell!
-It is set to 120DPI by default, so if running anything other than 320x240, you'll have to use RogueTools to adjust it. I am currently running it at 320x240x120dpi and haven't experienced many problems, except the top and bottom of the Dialer are cutoff, button's still reachable though. (If someone wants to help me fix this, please do, I just don't know where to start)
-Wifi support for the Kaiser is built in, should work out of the box!
-Starting with v1.2, Userinit.conf is added to the root of your SD, by default it has 16MB of Compcache, but this can be adjusted by editing the file.
Download! [Last updated on 5/29/10]
Changelog:
v1.3
-Removed userinit.conf, now everything is run directly from /system/bin/userinit.sh
-32MB Compcache by default
-Removed overclocking from the get-go. You can set it manually via RogueTools.
-Userinit.sh now renice's com.android.phone to try and improve ringing delay.
v1.2.1
-Removed redundant wlan.ko
-Replaced wlan.ko with kallt_kaffe's
-Reverted a change to userinit.sh that was causing awful performance
v1.2
-Removed Dropbox, Speedtest, Twicca, Shazam, 3Banana Notes, and LiveWallpapers
-Added Camera back (Fixes FC when trying to crop a wallpaper)
-Fixed Facebook Sync
-Userinit.conf is added to the root of SD card on first boot. This allows you to control Compcache, swap, and many other settings.
Click to expand...
Click to collapse
Thanks go out to mssmision for his port+quick guide to porting, Cyanogen for the build, and all the other developers that worked on getting Android running on this phone! You guys have made this phone so much more usable.
Woah, it's weird being in a different forum.
What is updated in this new version (1.1)? I'm still running the first one you posted in the Vogue forums (on a Vogue) and it's working great.
Cool!
Gonna try this one out.
Thanks a lot!
pastaeter said:
Cool!
Gonna try this one out.
Thanks a lot!
Click to expand...
Click to collapse
Let me know how it goes.
drkow19 said:
Woah, it's weird being in a different forum.
What is updated in this new version (1.1)? I'm still running the first one you posted in the Vogue forums (on a Vogue) and it's working great.
Click to expand...
Click to collapse
The updated version has wifi working for Kaiser, and some compcache tweaks done to /system/bin/userinit.conf. The first version I think I disabled compcache entirely, and it really showed once you got the build fully loaded.
any screens? how to install themes on Kaiser? Little guide please...
just downloaded going to give it a try
all live wallpapers dont work and show force close (exclude polar clock)
but its cool and fast (default it set at 450MHz and i set it to 500MHz)
Bench at 500MHz: MFLOPS:2.141
Times: 2.53s
Norm Res: 3.36
Precision: 2.224...
Maybe you add-in many of not neccessary app..
and one very good thing.. i have i think 320x428 and 120DPi in RogueTools. and its less blurry than thats sets in myn
Congrats for good rom.
exist CM with sense 2.1 on kaiser?
Compared to super eclair it has a few advantages:
-language dutch is included and fully working
-more options: look at call settings.
-market is fully working (for now), but no paid apps (super eclair market broke after using a time, not all apps can be found).
But less free ram.
Not really worth upgrading for me (I have 2 kaisers).
i've installed this build on my kaiser and it works great.
tested the wifi, the market, both work great. bluetooth turns on but i haven't had the chance to send or receive any files or to connect it to my wireless headsets.
did not test the data yet.
installed helix launcher and i think it moves a little bit faster than the regular home screen.
thank for the upload
mazz8y said:
any screens? how to install themes on Kaiser? Little guide please...
Click to expand...
Click to collapse
Here's a guide to installing to NAND. The build is not themed at all, so you can check out the official Cyanogen thread for screenshots, they should look identical (besides a smaller res).
Michga said:
all live wallpapers dont work and show force close (exclude polar clock)
but its cool and fast (default it set at 450MHz and i set it to 500MHz)
Bench at 500MHz: MFLOPS:2.141
Times: 2.53s
Norm Res: 3.36
Precision: 2.224...
Maybe you add-in many of not neccessary app..
Click to expand...
Click to collapse
Yeah I just noticed the Live Wallpapers crash, didn't try this out before. Not sure if it's possible to fix it, I don't remember them working on any other Eclair builds.
Also, I noticed that /system is running low on space, so I will definitely try to trim some fat by removing pre-installed apps.
Michga said:
exist CM with sense 2.1 on kaiser?
Click to expand...
Click to collapse
Not that I know of. But there is a QVGA Android phone with Sense coming out sometime this summer, and I'm sure someone will attempt to port it.
From the vogue thread...
Great build, I'm running it right now, and it thus far seems to be fast and stable! (bumped up the o/c to 500)
Two pieces of feedback...
If you can get facebook sync to work with the most current facebook app (the one with the "inbox" button rather than the "take photo" button it would be amazing. As of now, the only way to get facebook sync to work is to run the Moto Droid apk, which is the previous version.)
Anyway to get full market from the getgo? I have marketenabler working, but it isn't always consistent.
That being said, amazing build. Good work.
Click to expand...
Click to collapse
@GeJohnO: Looks like this is a known issue with the original Cyanogen
A few known issues;
* Facebook from market breaks sync for Market users (see forum for alternative apk) - only on Dream, Sapphire is OK. Blame Facebook.
Click to expand...
Click to collapse
I'll look into including whatever alternate APK in the next build.
Also I found that taking out the Camera app causes Gallery to FC when trying to crop a wallpaper, so I'll fix that as well.
I just got a text message from the 24th of this months with super ecalir lite, I don't know if this version hzs those issues too?
aqtrans said:
This is my port of Cyanogen's latest Eclair build, v5.07-stable.
It is basically mssmison's 5.07-test3 build updated, I used the same process he did to port this one.
Included Apps:
-Connectbot
-Twicca
-3banana Notes
-Astro
-RogueTools
-Dropbox
-LinPack
-Speedtest
-MetaMorph
-HomeSwitcher
(I will probably cut this down a lot in future builds, kind of made this for my own personal use and threw in all the Apps I usually reinstall)
Notes:
-No major problems found so far (besides Eclair-specific problems like the Camera not working).
-Speed is comparable to other Eclair builds, maybe even a bit zippier at times.
-It should be fully compatible with any themes/mods made for Cyanogenmod v5.07-stable. (Although my attempt at flashing this theme sent my phone into an "android.power wakeup" loop, so be cautious!)
-It is set to 120DPI by default, so if running anything other than 320x240, you'll have to use RogueTools to adjust it. I am currently running it at 320x240x120dpi and haven't experienced many problems, except the top and bottom of the Dialer are cutoff, button's still reachable though. (If someone wants to help me fix this, please do, I just don't know where to start)
-Wifi support for the Kaiser is built in, should work out of the box!
Download!
Thanks go out to mssmision for his port+quick guide to porting, Cyanogen for the build, and all the other developers that worked on getting Android running on this phone! You guys have made this phone so much more usable.
Click to expand...
Click to collapse
Add the darkstar theme to not working as well. It put it in a permanent loop
thebulletfromhell said:
Add the darkstar theme to not working as well. It put it in a permanent loop
Click to expand...
Click to collapse
The darkstar theme hasn't been released for 5.0.7 stable. The most current release is for test5. This may be why it's not working for you
I tried mssmison's test 3 out, and it was problematic. A lot of stuff would end up resetting the phone, back to the start up animation. Haven't tried this one yet, but my experience with Eclairs have been bad so far.
Wish there was a way to run Android on both NAND and SD cards. That way, I can test them out on the SD card, without destroying my NAND installation.
Running this port since yesterday and I must say I'm really impressed. Fast, responsive and also it seems not to drain battery as fast as other builds.
Any chance of getting Corporate Calendar in the next version (currently Exchange sync works only for Mail and Contacts in this build).
Version 1.2 posted! Changelog in the OP.
I tried adding the modded Market, but it kept FC'ing whenever an app would go to install. Looking at the thread, it seems like a known issue, without a fix that I could find
robuser007 said:
I just got a text message from the 24th of this months with super ecalir lite, I don't know if this version hzs those issues too?
Click to expand...
Click to collapse
I haven't experienced any such issues. As far as I know, I've been receiving texts on time, without delay.
thebulletfromhell said:
Add the darkstar theme to not working as well. It put it in a permanent loop
Click to expand...
Click to collapse
Added a note to the OP about this. Thanks!
aqtrans said:
Version 1.2 posted!
Click to expand...
Click to collapse
Suggestions for 1.3
- Remove /system/etc/wifi/wlan.ko (not needed)
- Replace wlan.ko /system/lib/modules/wlan.ko with the attached version (I believe it works better for Polaris users)
I was about to suggest increasing the wlan scan interval but I noticed that you hade allready done that.
I've had problems with builds that have sensors.msm7k.so all by itself so I added the sapphire sensors before I installed v1.1 as a precaution but I'll try without doing that once I reinstall with v1.2 and I'll let you know how it goes.
Hy folks!
What to say, after much effort, should work all
I made a restailing this rom with new sources CyanogenMod 5.0.7.
Now, this rom is even more extraordinary and is close to being release
candidates. are likely to be problems with some function or app, I hope you give me an help to solve them
enjoy people!
Credits to:
ekowanz, princedwi, werziluk, liljom, danwar for their help in testing this rom.
alderveld.nl for hosting (http://www.alderveld.com/).
adwinp and behnaam for the indirect help on kernel
Special thanks to:
darchstar for his contribution in the development of Rom.
dipje, for his time, battery life and awesome work done on the kernel
nprussell said:
In my opinion (and I hope that means something around here):
This is the best VANILLA 2.1 rom around right now. Really, this is brilliant work Robin.
Click to expand...
Click to collapse
Thanks man
Important:
I dedicate most of my free time in the development roms, so I need incentives to continue with my next projects.
Please, consider a minimal donation, a small fee for you is a great help to me.
For any problem send me a message or post on the thread.
Thanks so much for your contribution.
I'm not responsable if you bricked your phone, data lost or something else. You have to always do an nandroid backups' before updating.
THIS ROM IS ONLY FOR GSM HERO
Features:
-New based on cyanogenmod 5.0.7
-Making phone calls
-3G and 2G data
-HSDPA indicator
-Sync all
-Network location
-GPS and AGPS
-Bluetooth file transfer
-Live wallpapers
-Full market access
-Camera at 5 megapixel resolution
-Tweaks
-compcache
-Java Box
-3d gallery
-JIT
-BFS
-OC kernel
-a2sd
-camera
-3gp video
-leds working all
-auto-brightness
-busybox
-auto-sync
-Great 3D performance
-trackball
-A2DP
and much more!
Code:
Extra_apps:
-Facebook
-Overclock widget
-Astro
-Jbed
-CorCall
-CorGal
-GScript_Lite
-HTC_music
-Adfree
-Autokiller
-APNdroid
-Shazam
-GoogleGoggles
-Market_enabler
-Maps_brut
-Barcode
-Reboot_widget
-TitaniumBackup
-Wired_tether
-Wireless_tether
-Setcpu
Known Bugs:
Nothing that I know
Instructions:
if you come from another rom then follow this:
2.Put the package AndrobinXXXXXX in your SDCard.
3.Recovery mode
4.Nandroid backup
5.Wipe all 4
6.ext partition (Board ext2, since the hero doesn't have much ram)
7.Flash ROM
8.Flash extra_appsXXXXXX
9.Reboot
10.Reboot a second time
remember, complete wipe is always best
binding restart a second time after the first firstboot
It's highly recommended restarting a second time to allow the system to settle down.
It would be better to wait 30 seconds after the start of the device to permit full loading of the system, even if the lock screen is already visualised.
Code:
You can use gscript-lite to enable/disable compcache
Add these scripts:
disable compcache (SU required on)
Code:
rm -f /system/etc/init.d/35ramzswapenable comopcache
enable compcache (SU required on)
Code:
cp /system/etc/35ramzswap /system/etc/init.d/35ramzswap
Code:
-[B]if you want to change the freq min/max are in the system/etc/init.d/30tweaks:[/B]
echo 245760 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
echo 518400 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
otherwise you can simply use overclocking widget
table of selectable frequencies 122880, 352000, 652800, 691200
the frequency and number of frequency, were chosen to provide greater stability, performance and battery life
Code:
-[B]to optimize the performance of your device follow these threads:
[URL="http://forum.xda-developers.com/showthread.php?t=628178"]spare parts/overclock[/URL] and [URL="http://forum.xda-developers.com/showthread.php?t=622666"]autokiller manager[/URL][/B]
Changelog CR4_5.0.7:
-remove BFS
-fix network location
-update slow market
-fix lockscreen and notification bar
-trackball (thanks witysimon)
-confirmed A2DP works
-add Setcpu well as overclock widget
-try this!
Changelog CR3_5.0.7:
-ADW_launcher and Spare_parts in settings
-Percentage battery
-Gallery3d work fully
-Update all apps
-Maps_brut
-Dalvik JIT incredibly stable
-Extraordinary life battery
-A2DP Should work
-GPS work well
-Auto-sync
-Sync all
-Livewallpapers
Radio update highly suggested!
Read the instructions before installing!
Download link:
-Androbin_CR4_5.0.7 (OC and JIT disabled)
-Androbin_CR3_5.0.7 (OC and JIT activated)
-Androbin_CR2_5.0.7 (OC and JIT activated)
-New radio update (back to the old, if you have problems with the new)
-Old radio
-HTC_IME (instructions for installation)
-extra_apps
-Launchers
-JIT_ON
-JIT_OFF
If you have requests or if you have found problems post here!
________________________________________________
Is A2DP actually working? If it is, then this is a major breakthrough, as this would be the first 2.1 AOSP will functioning BT audio during calls!
EDITED: Forget my question about compcache. It's right there in the first post!
Dam you Robin, im just going to sleep ready for a very early start tomorrow but just cant go to sleep without trying this ROM
EIDT: Two things to ask are the notification icons still coloured e.g gmail and is Jit enabled default?
marinierb said:
Is A2DP actually working? If it is, then this is a major breakthrough, as this would be the first 2.1 AOSP will functioning BT audio during calls!
EDITED: Forget my question about compcache. It's right there in the first post!
Click to expand...
Click to collapse
I worked on A2DP, but I have nothing with which to test
werziluk said:
Dam you Robin, im just going to sleep ready for a very early start tomorrow but just cant go to sleep without trying this ROM
EIDT: Two things to ask are the notification icons still coloured e.g gmail and is Jit enabled default?
Click to expand...
Click to collapse
There are notification icons colored and JIT is enabled
Cool. Wish I could test but really need A2DP as of now.
How about the trackball-LED, is it working for noticifations, calls, SMS etc?
kosmiq said:
Cool. Wish I could test but really need A2DP as of now.
How about the trackball-LED, is it working for noticifations, calls, SMS etc?
Click to expand...
Click to collapse
I can confirm BT WORKS!!!
oh wow! if thats true, then...wow
Robin04 if i may be so bold to ask...
what is 'extraordinary battery life' converted in 'hours' ?
i would really like to try out this rom but battery life is a real dealbreaker for me..
thnx in advance
not workin for hero that can't overclock over 652.
Wait a moment...You made hanser01 closing his topic because "Cyanogenmod is a beta so it is better to not develop with it" and now YOU are using CM sources?? Is the world still working like I knew a few years ago or it is suddenly changed??
@mardurhack
hanser01 was using Cyanogenmod 5.0.8, that is Beta and unstable, this is using Cyanogenmod 5.0.7.
mardurhack said:
Wait a moment...You made hanser01 closing his topic because "Cyanogenmod is a beta so it is better to not develop with it" and now YOU are using CM sources?? Is the world still working like I knew a few years ago or it is suddenly changed??
Click to expand...
Click to collapse
Klutsh said:
@mardurhack
hanser01 was using Cyanogenmod 5.0.8, that is Beta and unstable, this is using Cyanogenmod 5.0.7.
Click to expand...
Click to collapse
Stop what you are about to say. Do not start a flame war. Robin nor I would like to see this! hanser01 was banned/deleted because of his incompetence to work well with other developers. Please do not post anything else on this matter.
Xenoside
xenoside said:
Stop what you are about to say. Do not start a flame war. Robin nor I would like to see this! hanser01 was banned/deleted because of his incompetence to work well with other developers. Please do not post anything else on this matter.
Xenoside
Click to expand...
Click to collapse
That was not my intention, I was just pointing out the difference between ROM's nothing more.
Anyhow, back on topic.
How would I go about pushing a new apns-conf.xml and have it load as default using this ROM?
I have tried pushing to /system/etc, rebooting (wipe dalvic & factory reset) and then loading in default APN's in the setting menu, but what I added to the xml file does not show.
Code:
<apn carrier="giffgaff"
mcc="234"
mnc="10"
apn="giffgaff.com"
user="giffgaff"
server=""
password="password"
mmsc="http://mmsc.mediamessaging.co.uk:8002"
mmsproxy="193.113.200.195"
mmsport="8080"
type="default,mms"
/>
xenoside said:
Stop what you are about to say. Do not start a flame war. Robin nor I would like to see this! hanser01 was banned/deleted because of his incompetence to work well with other developers. Please do not post anything else on this matter.
Xenoside
Click to expand...
Click to collapse
Calm down! It was enough to explain me that 5.0.7 is NOT a beta while .8 is. I got it and I'm sorry to have misunderstood! This is it. By the way if I want to talk about what happened with hanser I have the right to do it, maybe not in this section, but I can! While YOU have no rights to tell me what I can or can't do.
Coming back to the thread...The automatic brightness doesn't work... It is stuck on the last level and to recalibrate it you have to push the sleep button and then rewake the phone. Well it goes against the idea of "automatic" don't you think? Hope you can solve it and, again, I'm sorry to have had doubts about beta or non-beta! My fault!
PS: To be more clear - If I put the phone under a lamp the brightness increases but when I turn-off the lamp the brightness still stays on that level even if I'm in a complete darkness! And the screen doesn't dim... Any idea?
Hi robin, is Amon-ra recovery full compatible with App2SD in this rom? Thanx
wtf...wifi and 3g doesn't work for me :S
No problems with wifi or 3G here.
But 3D performance is still very bad, as bad as in CR1. Also the colors are not correct.
dan96815 said:
I can confirm BT WORKS!!!
Click to expand...
Click to collapse
Are you **** serious? God damn if that is true
kosmiq said:
Are you **** serious? God damn if that is true
Click to expand...
Click to collapse
I can confirm that works just tested and it works.. finally vanilla with bt handsets <3
For use with a HTC GSM Hero
What is Fusion!ROM...
FusionROM is my hobby... it is the ROM I use with my phone everyday so it works very well for me and I hope it will work well for you. I also have a full time job so updates will come at complete random intervals as my life allows them.
Click to expand...
Click to collapse
Big thanks to all the people of the CyanogenMod team for all the great enhancements to android.
Thanks to the community for keeping our Hero's interesting.
Testing in progess report bugs please...
Whats not working...
Waiting for you to test and let me know.
Warnings ...
Trying to setup your google account in the Setup Wizard without a connection can cause problems... skip this step and setup in Settings.
The phone get very slow when the SD card is being checked for error just wait a few seconds for it to finish.
Tips
For stock In-Call UI (generic android style) and buttons ( Settings - Call Settings - In-call touch UI(uncheck) )
To remove the Lockscreen music controls ( Settings - CyanogenMod settings - Input settings - Lockscreen music controls)
Trackball press to skip to next music track when screen is off and music is already playing
Volume Up-Down long press to skip music tracks when screen is off and music is already playing
Apps2SD
Froyo APPS2SD is available...
You may need to manually enter your APNs but some are included.
report bugs and be nice and I'll try to help and fix what I can. If you want to be pro active also post to CyanogenMod forums so the Hero gets good support from there team also.
Fusion!ROM 2.2 includes Google apps
Change Log...
Update 7
Many changes in this release
New default setup and pre-installed dalvik-cache (all cyanogen settings are available you might need to look for them if you don't like the defaults)
GPS is working well in my tests
Rotation is disabled by default - enable it in settings
Added back Gallery3D with rotate hack (still might have some issues but works well enough for me)
Camera touch to focus mode.
All the latest from CyanogenMod
Update 8
New Fusion!ROM boot screen
Includes CPUSpeed for over-clocking and works very well
Synced to CyanogenMod lastest
Working compcache
Feels faster and gets higher linpack score then update 7
All updated google apps
Gallery 3D removed for customized Gallery app.
Some but not all APNs
Should boot for everyone now... please let me know.
Headphone jack icon
Many small changes
Update 9
Synced to CyanogenMod lastest
updated google apps
Gallery 3D returns and is better then ever
APNs updated
New kernel based on flykernel with my own additions and many overclocking options using CPUSpeed app.
Compcache on by default no slowdowns
GPS works very fast
Small cosmetic fixes not found in any other ROM see if you can find them
Update 10
Synced to CyanogenMod latest
Gallery 3D rotation bug is gone
APNs updated again
Maybe VPN is fixed but I can't test it.
Please be warned Fusion!ROM is under development and may contain bugs... this is BETAsoftware and testers are welcome!
Warning! this is a beta and may contains bugs you should backup before testing!
Full wipe recommended... too much has changed back up your data!!!!.
INSTALL FIRST Software over-clockable using included CPUSpeed app.
http://www.multiupload.com/M8LU4HAI2F
Optional Addons:
Older version Update9
http://www.multiupload.com/4OWQMP9EJW
Kernel sources are available on github
wooo lookin like 1st download. can u giv more indication as to what works what doesnt etc?
is camera fixed ?
Can you make list of features - working/not working.
Flashing, so I can benchmark this.
Remember to wait a while before you benchmark there is a lot going on in the background for about 15-20min
rbrucemtl said:
Remember to wait a while before you benchmark there is a lot going on in the background for about 15-20min
Click to expand...
Click to collapse
Why 20min? Also, I still can connect it to PC. Device is offline via ADB.
WOW !! Froyo for the Hero at last - been waiting for this - ill test
Some Screenshots please
How is it slimmed down?
Don't mix up AOSP with CyanogenMod..
And how is this different from the CM 6 alphas?
Linpack is 5012.
BenchmarkPI is 7200ms.
691Mhz.
Also, it counts as a cheat, since the 16 ROMs I've tested didn't have JIT enabled.
Pro-tip: Don't wait 20minutes. Restart the phone 3 times.
In order for Jit to work the java files need to be processed and this takes time. Plus if you have lots of music the album art will be processed too... etc.etc.
ADB works but you need latest driver and might have to reinstall the driver if in windows.
shokkapic said:
Why 20min? Also, I still can connect it to PC. Device is offline via ADB.
Click to expand...
Click to collapse
rbrucemtl said:
In order for Jit to work the java files need to be processed and this takes time.
Click to expand...
Click to collapse
Nope, it's done on the start of an app.
CyanogenMod is the base... try it...
maxisma said:
Don't mix up AOSP with CyanogenMod..
And how is this different from the CM 6 alphas?
Click to expand...
Click to collapse
OOOOKAY
maxisma said:
Nope, it's done on the start of an app.
Click to expand...
Click to collapse
deleted
luvgirl12345 said:
Is this rom up to par with the speed of current 2.1 roms?
Sent from my HTC Hero using XDA App
Click to expand...
Click to collapse
It is faster, because it has JIT enabled, by default.
2.1 ROMs with JIT are similar (but slightly inferior) to this ROM.
deleted
It's FAST!
Autobrightness doesn't work
Testing now
SD not working yet
This ROM is based on the Tun4fish version of Desire_Gingerbread_Sense 1.2 by siulmagic (thanks a lot!!)
I modified this rom and mixing with other rom find in the original HTC Desire section in XDA. Thanks to all developers of original HTC Desire!
This is SENSE 1.9 with some little things from SENSE 2.1 like notification quick settings and notification last apps!!!
This rom is full multi language!!
I decided to make this rom because I love sense, I love speed and I love free ram for multi tasking.
The original tun4fish rom was great, but I decided to make a lighter and international version with some tweak for usability.
Please tell me if you find bugs!
~Changelog ~
V1.2
- This is V1.1 Fixed, working 100%
- Merging some feature with HyperSense Nova, from nexus One section in XDA! Thanks to the developer Iperzampem0, mine compatriot!
- VOLUME ROCKER SKIP SONGS!! (Like cm7) THANKS TO matheusvilela and Iperzampem0
- increased jpeg quality in camera
- fix little bug in htcAlbum
- com.android.phone fixed with patch (already present in v1.1, don't need to flash)
- removed usb debug icon (build.prop tweak)
- switch to unity V8 kernel, VDD UV!!
- updated SU in xbin (fixed)
- addded oc/uv beater
- added AdFree
- added dspManager!
V1.1
REMOVED: bugged.
V1.0
- keyboard backlight fix integrated without losing multilanguage in framework
- market updated (play store now )
- su updated
- battery percentage
- loading circles from gingerbread style (no more froyo style)
- CLEAN CLEAN CLEAN!! no more major bugs apart classic sense 1.9 bugs (rosie landscape, 720p recording).
Click to expand...
Click to collapse
~Bugs ~
- Classic sense 1.9 problems: rosie landscape broken, 720p broken. - using lgCamera from market, 720p working -
- com.android.phone force close at startup: can't unlock sim if you use sim locking code - temporarily fixed with a patch installed in v1.1 or to flash over 1.0 (download section)!!
Click to expand...
Click to collapse
~ Planned for the future ~
1) Find a decent UV kernel without camera flash bug and 386mhz bug, to increase battery life
2) odexed and deodexed versions of the rom
- Port of HTC camera from original desire Z camera to sense 1.9 (very hard, but is the only feature I miss from sense 2.1)
- Volume rocker skip song (very hard with modding framework - probably with an app. The only thing I miss from CM)
- Fix landscape Rosie or prevent rotation (for sense 1.9, very hard)
- Reduce text size and list size in sense application
- Reduce text size in standard android application (like spare parts in CM7)
Click to expand...
Click to collapse
~ FIX ~
- v1.1 installing apk bug fixed: view single post tomorrow will do an update zip and "new version" 1.1.1
- NEW Sim unlock fix (com.android.phone FIXED!!) for 1.0: update_fix_sim_lock (the old one not working)
(after boot you have to wait 10 - 20 seconds before unlock your sim card, because you have to wait the script to kill com.android.phone, and wait android system to restart correctly com.android.phone. After some seconds you will notice that the signal return. After that you can unlock your sim with pin code).
- UV kernel (not tested so much, is unity v8 for desire HD but works on desire z): Unity V8 (thanks to mesaj report)
- Unity v10 kernel compatible, UV/OC, camera flash lag present in some phone: XDA-single-post (Tanks to 008325)
!!! In my DZ camera flash lag is present. If you use this kernel or others unity/rcMix kernel, please report if camera flash lag is present or not !!!
- Others kernels (not tested): link (thanks to mesaj report)
- keyboard backlight fix for 0.2 (OLD): KB_Backlight_Fix by tun4fish (will miss multi language on lockscreen and notification date)
Click to expand...
Click to collapse
~ Credits ~
Desire_Gingerbread_Sense 1.2 by siulmagic.
vision_bulletproof_desire_sense_1.0 by tun4fish.
~ Downloads ~
LightSense 1.2 - link1: FAST - link2: minus
LightSense 1.1 - Removed: bugged.
LightSense 1.0
Light Sense 0.2
Light Sense 0.1
Congantulations on your first ROM! I will download it when you uploaded it. Any screenshots?
Mate if you need any help porting just pm me, or go to virtuous irc
Sent from my HTC Vision using XDA
sense2.1？
xT4Z1N4TRx said:
Mate if you need any help porting just pm me, or go to virtuous irc
Sent from my HTC Vision using XDA
Click to expand...
Click to collapse
You, sir, manage three DZ/G2 ROMs of your own, and STILL offer support to others??
You deserve a medal
complimenti
vaderx10minipro said:
Congantulations on your first ROM! I will download it when you uploaded it. Any screenshots?
Click to expand...
Click to collapse
I'm making screenshot now
BTW it is the standard sense 1.9 interface (similar to 2.1, but lighter)
lzx2980173 said:
sense2.1？
Click to expand...
Click to collapse
It is sense 1.9, similar to 2.1 but lighter (less features but much more lighter)
kekkojoker90 said:
complimenti
Click to expand...
Click to collapse
Grazie!!
xT4Z1N4TRx said:
Mate if you need any help porting just pm me, or go to virtuous irc
Sent from my HTC Vision using XDA
Click to expand...
Click to collapse
thanks so much!
I'll take a look to virtuous irc and I'll pm you if I need help.
My problem is found a place where to understand basics things on the rom porting and editing of framework/apk, because in xda or searching on google I can't find so much.. Hope virtuous irc is what i need
Hey, did you tried with flashing unity v10 kernel? maybe this will help, I see you have v5 kernel already, so maybe newer could hopefully solve some problems.
Affinity uses this kernel, so you can find it there or someone may post link to flashable zip with kernel only.
mesaj said:
Hey, did you tried with flashing unity v10 kernel? maybe this will help, I see you have v5 kernel already, so maybe newer could hopefully solve some problems.
Affinity uses this kernel, so you can find it there or someone may post link to flashable zip with kernel only.
Click to expand...
Click to collapse
Yeah, but new unity kernel have a lot of strange problems in ALL roms:
1) Camera flash lag:
When you use camera flash and CPU speed is not at 384mhz, the flash have a lag (is faster, cause is syncronized with clock speed i think).
Only at 384mhz works well.
2) 384mhz issue:
384mhz isn't really 384, but ~ 800mhz.
frequencies > 384 and < 800 are worse than 384mhz.
So CPU will jump from 250mhz to 384 (that are 800mhz) and then to 480mhz, 520, 614, 700.. 800.. 900..
245 - 800 - 400, isn't a good thing.. also UV is bad for this reason, I made a patch for setCPU to disable freq > 384 and < 800, but is only a stupid patch for making UV and have good performance. The problem persists and you can't have good scaling with that kernel.
I tried that kernel on Virtuous sense 2.0.0 and Android Revolution HD 7.0.2.. same issue!
Also last unity kernel have that issue.. I don't understand why no one noticed that
I would love to take a look to unity v10 and rcmix v12 kernel, but I have never read linux kernel, and i think it isn't easy to understand if you do not know where are the important parts of code..
Edit:
I just flashed unity kernel.. camera flash lag is here out of 384mhz, and 384 performs like 800mhz..
btw this bug is present also in RCMIX v12.. same bug, same part of code, I think..
I can't find source of unity v10 and rcmix (I only found source of unity v6)
This is great! Thanks! I'll let you know what bugs i find!
So far I have only needed to wipe the data for the market to get it to stop force closing =)
Edit: it's also got the classic GB Sense Orange LED bug. Pretty minor stuff. I think Siulmagic figured that one out. He's moved on to the G2x, but he might help us out with that one.
Lightflow from the market is a temp workaround for it. I think you just install it and enable it and it turns the led off after a few seconds.
Sent from my HTC Vision using XDA
=JKT= said:
This is great! Thanks! I'll let you know what bugs i find!
So far I have only needed to wipe the data for the market to get it to stop force closing =)
Edit: it's also got the classic GB Sense Orange LED bug. Pretty minor stuff. I think Siulmagic figured that one out. He's moved on to the G2x, but he might help us out with that one.
Lightflow from the market is a temp workaround for it. I think you just install it and enable it and it turns the led off after a few seconds.
Sent from my HTC Vision using XDA
Click to expand...
Click to collapse
Thank you! I'll make same test when I get time.
In the original rom by Siulmagic this bug is fixed, I have to check if the tun4fish rom introduced that bug or it's my rom only.
I think the bug is in the framework or something similar.
I'll find where is the problem and I'll try to fix using the incriminated file from the original siulmagic rom (without that bug)
Today I've discovered that my phone has powered down twice.
I deleted com.htc.launcher because I use Nemus Launcher, but I'm going to restore it and see if it happens any more. Besides that, I've done no other modifications besides reinstalling apps.
I'll let you know if I find this happening any more.
Sent from my HTC Vision using XDA
=JKT= said:
Today I've discovered that my phone has powered down twice.
I deleted com.htc.launcher because I use Nemus Launcher, but I'm going to restore it and see if it happens any more. Besides that, I've done no other modifications besides reinstalling apps.
I'll let you know if I find this happening any more.
Sent from my HTC Vision using XDA
Click to expand...
Click to collapse
Thank you!
Using this rom I don't notice similar issue, but I changed kernel to unity v9.
BTW let me know if the problem returns.
---
Now I'm making Light Sense 0.2.
I'll remove orange led bug, brightness "bug" and the green glow overscroll that I don't like.
I have modified framework-res.apk to create a new charge animation because the old was ugly IMO.
I hope to introduce other things. I would love to prevent rosie rotation..
Those all sound like good changes to me! Never really liked the overscroll glow effect anyway.
After a few days on this, I'd say this rom has some of the important features of sense (contacts/social integration) with the speed and multitasking of aosp. Good stuff.
Sent from my HTC Vision using XDA
Good idea to make a real fast and clean sense ROM. I allways wonder why people only developed those laggy sense 3.5 roms. If the bugs are all sorted out i'll take a tour!
Grtz
I'm having some problem in editing framework-res.apk.
I think the problem are the permits or something similar.
Now v0.2 boot with chmod on framework-res.apk, but miss some feature of An-Droid rom, because mixing the framework I can't boot.
I'll find a solution in some days.
Is trackpad wake still going to be enabled, and only trackpad unlock removed?
regarding framework-res.apk, are you simply replacing the image files for the charging animation? If so, make sure the names match exactly, and that there are the same number of files after. If there are extras, I don't think it matters, but less will break it. I think.
I'll see if I have time to try and find a tidy solution to removing the overscroll glow.
Sent from my HTC Vision using XDA
I got rid of the green overscroll glow.
Here is the framework-res.apk:
http://db.tt/B0c0gnw0
Just put it in /system/framework/
And set the permissions to rwx, rxx, rxx
(Is that chmod 644?)
Sent from my HTC Vision using XDA
Thank you =JKT=
Now I'm at work to finish the new version
I hope to upload v0.2 in some hours
PS: trackpad wake is here, removed only trackpad unlock.
PPS: uploading now on minus. Now I go to sleep, tomorrow will post the direct link for version 0.2 for now use my minus page, you will see 0.2 when upload is done.
big news in this version!! Led bug is gone, new stuff from sense 2.1, for now only deodexed, for now battery percentage is gone (give me some days to re insert this as flashable update)
Hello guys!
Ok, as we said, we’re back with new ROM – ICS AOSP.
Don’t worry, we’ll provide you other ROMs as soon, as it possible. It's just the beginning.
Changelog (RC1):
- finally fixed location
- finally fixed GPS
- some improvements in camera HAL
- camera preview is now H/W rendered
- fixed signal lost issues
- fixed lost SMS issues
- fixed samsung sim toolkit (if you want to try, please install Stk.apk)
- fixed battery drain
- fixed gallery crash in some cases
- new RIL
Changelog (beta 3):
- fixed tethering
- fixed google location services
- fixed network location services
- wifi improvements
- performance improvements:
* added jit compiler
* added entropy performance hack
* improved dalvik parameters
Changelog (beta 2):
- fixed all timezone and calendar bugs
- fixed framework damaged by beta1
- fixed Netlink errors in logcat
- fixed gps and compass
- fixed bluetooth config
- fixed a2dp
- improved updater
- improved ramdisk
Changelog (beta 1):
- fixed bluetooth (with working deep)
- fixed logcat spam
- added tweak to hide reboot menu ( http://forum.xda-developers.com/showthread.php?p=35512923 )
- added tweak to force launcher rotation ( http://forum.xda-developers.com/showthread.php?p=35512923 )
- partially fixed videorecording
- added missing daemons and services
- fixed wallpapers size (now it looks just gorgeous)
- reduced Launcher size to by a 6MB
- fixed librs crash (live wallpapers)
- fixed YT reboots
- fixed proximity
Changelog (alpha 1):
- first release
What isn’t working (will be fixed soon):
- Video recording in stock app (try I
Download it now on Mod Edit: Links removed as Ad fly links are not allowed - see rule 13.
I’d be glad, if you would share links to our download page, instead of direct links to download.
Also would be great, if you wouldn’t create the mirrors.
Thanks.
Guys who made it happen:
- Macław
- Marcin1147
Thanks for help from:
- tom3q
- Trybicki
- ganster41
Cheers guys, I hope you’ll enjoy our return!
MaclawStudio team
EDIT1: About GPL
As you can see @andyharney has checked sources and reopened all closed threads.
Kernel sources were available on GitHub FOR A MONTHS.
And YES, kernel wasn't modified since CM9 RC2. It's the same old kernel.
Here comes the link: https://github.com/MaclawStudios/android_kernel_maclawstudios
You can also apply 2.6.35.7 to 2.6.35.14 patch if you want: http://forum.xda-developers.com/attachment.php?attachmentid=779403&d=1321023939
Also, I noticed that some of you are doing everything to destroy our work, and that's why we aren't publishing device profile sources. By the way we don't have to do this. We've developed device profile from scratch on closed license and we just won't publish it, just like Samsung. You can still use our old device profile or Jellaxy one.
EDIT2: About Deep Sleep in Beta 3
I noticed some people experiencing issue with deep sleep after installing the update. If you are affected by bug, please turn off Google location services. We’ll try to fix it in next release.
EDIT3: About something called "Seeder"
Please, don't use famous app/hack called "Seeder". We did a quick research and /dev/random isn't used in android frameworks anywhere. Seeder will improve performance ONLY in some custom apps or cryptography functions, and that's why... we've integrated seeder tweaks in beta3. Installing "Seeder" would only decrease your phone's performance because it will work in background and waste your RAM.
EDIT4: Bugtracker
Please, use bugtracker if you want to report a bug:
https://github.com/MaclawStudios/aosp/issues
Yay! First!
Sent from my BlackBerry 9300 using Tapatalk
What kernel is this running on?
Compiled by themselve I guess
Sent from my GT-S5660 using xda app-developers app
Good job! For alpha1 version sounds great! Downloading it right now!
By the way, at the moment this AOSP it's better than erikas's one
it works great for me so far
deepsleep is working, yt hq is smooth
everything is butter smooth
notification toggles are not part of aosp i guess (better make use of widgets then)
no random reboots
does it support a2sd ext or i have to take my chances
good work!
yuvalrozin said:
What kernel is this running on?
Click to expand...
Click to collapse
2.6.35.14 by MaclawStudio
The same is in CM9 RC2
Excuse me is someone would consider this blasphemy or something,
but can Maclaw's kernel run Erikas' roms and the other way around?
Cpu performans setting nothing
Natification panel buyon nothing
GT-S5660 cihazımdan Tapatalk 2 ile gönderildi
It looks great, and works great!!!! Thank you very very much!
Note: You must wipe data and cache after flashing this rom! Doesn't matter if you do this before or after flashing, but mandatory before booting! I looked intro updater-script and there is no wiping of data&cache
m.ali.ozkaya said:
Cpu performans setting nothing
Natification panel buyon nothing
Click to expand...
Click to collapse
Because it's AOSP. Clean Android straight from Google. Without any mods. Stock as hell. The same as on Galaxy Nexus.
marcin1147 said:
Because it's AOSP. Clean Android straight from Google. Without any mods. Stock as hell. The same as on Galaxy Nexus.
Click to expand...
Click to collapse
I guess he'll have to install NoFrills CPU application for CPU freq setting
It's smooth as hell Thank you again!
marcin1147 said:
Because it's AOSP. Clean Android straight from Google. Without any mods. Stock as hell. The same as on Galaxy Nexus.
Click to expand...
Click to collapse
great news.. video recording and bluetooth fix would be perfect..
Waiting
thank you marcin and maclaw..
A mini-bug I've found:
When you try to enter the "Select time zone" menu from "Date & Time", nothing happens - you get back to Settings menu
Also, I don't think this is a bug, but there are not status bar toggles Please implement this, even if maybe it's not AOSP - think that if Samsung would release ICS for Gio, there would be status bar toggles, as in Gingerbread stock rom.
bad work!
- random reoboots/hot reboots, nothing stable for me ...
- you modded the rom, it isn´t a clean aosp!
* You added Superuser
* You added Reboot Option in Power Menu
* You changed Bootanimation (Normal AOSP uses one in framework-res.apk)
* You added GApps ...
Normal AOSP Size is around 100 mb, so why urs is around 120 mb?
sry but AOSP means for me, that nothing will be customized, pls marcin, i know you are a gr8 developer but provide flashable packages for extra stuff! and not customize it in rom directly
It's great as it is! What difference is if you install GApps later or if it comes preinstalled? Same goes for SU!
bgm92 said:
It's great as it is! What difference is if you install GApps later or if it comes preinstalled? Same goes for SU!
Click to expand...
Click to collapse
Maybe he wants AOSP like Galaxy Nexus have! Btw, it also have gapps preinstalled, and about SU, I agreed if he wants AOSP like Nexus.
Oh, I know, about Gapps: he don't want to waste his bandwidth maybe!
AngSanley said:
Maybe he wants AOSP like Galaxy Nexus have! Btw, it also have gapps preinstalled, and about SU, I agreed if he wants AOSP like Nexus.
Oh, I know, about Gapps: he don't want to waste his bandwidth maybe!
Click to expand...
Click to collapse
do never try to kid me -.-
i have a monster computer and can build aosp in around 13 minutes
Also my bandwith is the best one here i think, with around 32 mb download per second, so i wont/cant waste my bandwith!
OldDroid said:
do never try to kid me -.-
i have a monster computer and can build aosp in around 13 minutes
Also my bandwith is the best one here i think, with around 32 mb download per second, so i wont/cant waste my bandwith!
Click to expand...
Click to collapse
So why u don't want included gapps?
Sent from my brain.
OldDroid said:
do never try to kid me -.-
i have a monster computer and can build aosp in around 13 minutes
Also my bandwith is the best one here i think, with around 32 mb download per second, so i wont/cant waste my bandwith!
Click to expand...
Click to collapse
You don't have to use our ROM. You can build your own ROM if you want