Related
Hi community - I updated to VP3G and now either the red button nor the end button finishes the call - this is bad - any idea what I can do ?
peter7 said:
Hi community - I updated to VP3G and now either the red button nor the end button finishes the call - this is bad - any idea what I can do ?
Click to expand...
Click to collapse
Tough to answer with any certainty without knowing more details. Could be your radio - I had that same problem with some radios. Since going with this ROM I have not had the problem. Also what apps do you have loaded?
Mark.
peter, it is something you have done as no one else has had this issue.
What radio? What software have you installed? Using a different Dialer? Hard reset?
We need more information besides "it doesn't work".
And as long as we're giving advice, this forum prefers possible concerns or issues be posted in the already available thread.
For example; if you're having problems with Black Majik, no need to start another thread, just post in the already available thread.
Thanks
Berd
Yes first I thought it is the radio so I switched to Radio 1.43 but the problem is still there. Now I found out it is more the case when I`m connected via GPRS that the button as well as the "end" software button dòn`t work ...
Applications which I use - no extra phon software, but magic button or the as follows: sk software, skype, sprite backup, webis etc.
It's your hardware controller card, gone bad. After some time all of your front button will stop responding. I had the same problem, sent to Dopod service center and got it fixed.
Its not any of ROM issues what so ever. Its a common defect of some earlier batch, as told by the techies at the Service Center.
berdinkerdickle said:
And as long as we're giving advice, this forum prefers possible concerns or issues be posted in the already available thread.
For example; if you're having problems with Black Majik, no need to start another thread, just post in the already available thread.
Click to expand...
Click to collapse
Heh, I made the same assertion once and was told on no uncertain terms that I was wrong.
It seems that it is not the hardware because it is wonderful working when I`m not online with GPRS or 3G !
So what elese can I do ? Should I try another ROM or can I just install an updated file for the GPRS issue ?
PLs help
please remember this is a Dev forum and I believe you answered your own question try flashing another ROM and see if that fixes it. I have no idea about updated GPRS software - you mean a radio ROM? just flash another OS and see if that works its not a problem with 3Gvp's rom but maybe you had a bad flash
vp3G said:
Heh, I made the same assertion once and was told on no uncertain terms that I was wrong.
Click to expand...
Click to collapse
LOCK:Enabled
EXEC:\xda-developers\HiJack.exe
Forum Rules:
http://forum.xda-developers.com/announcement.php?f=355
And Particularly this comment:
pof said:
post a comment to the relevant thread instead of starting a new one.
Click to expand...
Click to collapse
END: HiJack.exe
LOCK: Disabled
RST: Reset
@berdinkerdickle: Yep, at the time I cited that stuff too... and was told by a certain mod that I was still wrong!
peter7 said:
It seems that it is not the hardware because it is wonderful working when I`m not online with GPRS or 3G !
So what elese can I do ? Should I try another ROM or can I just install an updated file for the GPRS issue ?
Click to expand...
Click to collapse
Hmmm... that's an interesting twist on the problem I've never heard before. I would suggest a) hard reset b) reflash my ROM c) flash another ROM. I'd probably also go with a Cingular version of the radio for now ... 1.40 or 1.48.
VP - shouldn`t I start with a new radio rom version before I reinstall your ROM ??? At the moment I`m using the 1.43 version
Up to you, but I thought you said you'd already changed radios. I'd probably go for the hard reset and see if it works before installing anything else.
Hi VP, your advice worked - I changed to ROM 1.48 and now when I dial the online connection is stopped and reactivated after the phon call.
THANK you so much !!!!!!!!!!!!!!!
Best regards
from Germany
Active Sync Error
VP - it´s again me - pls can you look at my problem: My Tytn is telling me -in the meantime several times a day -that I have to resynchronize and after I got the warning to resynchronize there comes the next warning that there is no IP number !
All,
Due to good success in the Blue Angel section, I have decided to open a Questions and Answers thread on this section of the forum as well. This will be good to keep the number of new threads with questions down to a minimum, which will make new threads essentially for people that are contributing to the Vogue in any way. This includes but is not limited to people that are providing
*New Roms and Kitchens
*Programs and Apps
*Fixes
*Skins
*Tips and Tricks
However, I have a life (and so do most of you), which is why I would like to request the help from other Seniors (or anyone who knows the answer really ) to monitor the thread as well. This will have the added side effect of creating an ever self updating knowledge base that will far extend the content of the Wiki. This will in turn save us from having to answer the same question 37000 times...
Without further ado, lets go for it!
egzthunder1 said:
All,
Due to good success in the Blue Angel section, I have decided to open a Questions and Answers thread on this section of the forum as well. This will be good to keep the number of new threads with questions down to a minimum, which will make new threads essentially for people that are contributing to the Vogue in any way. This includes but is not limited to people that are providing
*New Roms and Kitchens
*Programs and Apps
*Fixes
*Skins
*Tips and Tricks
However, I have a life (and so do most of you), which is why I would like to request the help from other Seniors (or anyone who knows the answer really ) to monitor the thread as well. This will have the added side effect of creating an ever self updating knowledge base that will far extend the content of the Wiki. This will in turn save us from having to answer the same question 37000 times...
Without further ado, lets go for it!
Click to expand...
Click to collapse
GOOD IDEA!
Hi there Gents any input
Barogi awesome so far for v2; media player not staying in full screen mode though, and manila home weather under clock wont update when you push update now also getting error message for manila home on reboot
Great idea for a faq page!
I have been using a NFSfan rom on my bell vogue for a while, and it crapped out today for some reason. Rather than put another WM build on it, I wanted to change to Android.
I have looked through many pages in here, but I can't find a simple tutorial on switch from a custom WM build to a Android build. I prefer to use the NAND method so that I don't ever have to see WM again...
Can someone create or point me towards a step-by-step guide for installing Android? Keep in mind that I have absolutely no Android experience, and that my custom ROM is completely messed up, so would it make for sense to flash the a manf build and upgrade from there?
Thanks
devildog0729 said:
Barogi awesome so far for v2; media player not staying in full screen mode though, and manila home weather under clock wont update when you push update now also getting error message for manila home on reboot
Click to expand...
Click to collapse
Did you install the CDMA home weather fix?
joshmxpx said:
Great idea for a faq page!
I have been using a NFSfan rom on my bell vogue for a while, and it crapped out today for some reason. Rather than put another WM build on it, I wanted to change to Android.
I have looked through many pages in here, but I can't find a simple tutorial on switch from a custom WM build to a Android build. I prefer to use the NAND method so that I don't ever have to see WM again...
Can someone create or point me towards a step-by-step guide for installing Android? Keep in mind that I have absolutely no Android experience, and that my custom ROM is completely messed up, so would it make for sense to flash the a manf build and upgrade from there?
Thanks
Click to expand...
Click to collapse
Here you go
http://forum.xda-developers.com/showthread.php?t=628353
Good luck!
devildog0729 said:
Barogi awesome so far for v2; media player not staying in full screen mode though, and manila home weather under clock wont update when you push update now also getting error message for manila home on reboot
Click to expand...
Click to collapse
As far as WMP, Barogi will have to look into it since it is his rom.
One last thing, please do not double post. Thanks for understanding...
I have a question:
I recently flashed the Bell rom with the latest radio (I couldn't get the radio only nbh to apply properly), and then subsequently flashed with the latest NagROM rom (which is awesome btw).
Now of course, at startup i have the nice HTC screen with the rom version etc, followed by an AWFUL blue BELL screen (and then the nice orange wm6.5 screen).
Is it possible to change the blue BELL screen? And if so how?
AaronNZ said:
I have a question:
I recently flashed the Bell rom with the latest radio (I couldn't get the radio only nbh to apply properly), and then subsequently flashed with the latest NagROM rom (which is awesome btw).
Now of course, at startup i have the nice HTC screen with the rom version etc, followed by an AWFUL blue BELL screen (and then the nice orange wm6.5 screen).
Is it possible to change the blue BELL screen? And if so how?
Click to expand...
Click to collapse
There was a cab to change that somewhere around here in this section of the forum. Alternatively, you can flash NFSFan's rom (which will get rid of it), or you can try mine as well and then reflash Nag's rom.
Edit: Here you go
http://rapidshare.com/files/333401458/BlueBell_Screen_Removal_Rom.rar.html
Question from motoyola
motoyola said:
Help guys, I have a Sprint vogue that was flashed before. It was CID unlocked and has custom ROM on it. My cousin was the one using it then he returned it to me at this state. Problem is the phone does not have any radio. So i tried to bootload it and flash it with a radio but it does not accept it . It's now CID locked.
VOGU100 MFG
SPL-2.01.1000
CPLD-3
I tried to flash it with an OEM ROM, Sprint, USC, Alltel, telus, Bell, VZW nothing seems to work. is there any way to ICD unlock this? so i could flash it with an OEM rom. Thanks.
Click to expand...
Click to collapse
Look in my signature. There is a guide for unlocking as well as superCID unlock the device. Let me know if you need help.
egzthunder1 said:
There was a cab to change that somewhere around here in this section of the forum. Alternatively, you can flash NFSFan's rom (which will get rid of it), or you can try mine as well and then reflash Nag's rom.
Edit: Here you go
http://rapidshare.com/files/333401458/BlueBell_Screen_Removal_Rom.rar.html
Click to expand...
Click to collapse
Thanks, that link is broken, but I found it here (along with some other handy things)
http://www.webcoast.net/temp/
i just flash my vogue with the latest NFSFAN rom. can someone tell me the setting to get my gps to work? whenever i start googlemap it keeps on trying to connect through the data connection. (i did do that one step that NFSFAN asked for the gps dL that verizon cab)
Question from mac+htc
mac+htc said:
Hey everyone,
So I was running NSFANS 6.5 ROM on my device (Amazing ROM btw) But I needed to revert back to the stock rom. I used the VZW updater to go back to the stock rom and I changed the esn on line. When I dialed the *228 and choose option 1 I got a failed message. So I called customer support and he walked me through a manual programing. Well that got voice working but when I went to use the data it wouldn't work. I made sure all the network settings were right, and I still couldn't connect. Well then I hard reset the device and now I am back to square 1. No voice no data. Is this something from NSFANS rom that is messing the phone up? I don't want to call again because their tech support takes forever and I am afraid they are just going to tell me to take the phone into the store. Thanks in advance!
Click to expand...
Click to collapse
Why did you change the E$N? Where you using the device in a different carrier?
Back to your problem. Your EPST settings should survive a hard reset as those are parameters that are not stored in Windows (afaik). It really makes not difference which rom you are using (at least for Voice and SMS).
Lets focus on your main phone's capabilities first. If your EPST settings truly got lost, you will need to get them from Verizon again. The main ones are the MSD and MIN. Make sure that you write them down this time as you will need them again if they go bye bye.
As for your internet, you will probably need to set the correct username in the phone's programming as well (also info that you will need from Verizon, but it should be something like [email protected] or something like that)
Do that and let me know if this works. They will have to program this for you this time, but once you have the values that I mentioned before, you will be able to do it yourself.
Question from pasdabeer
pasdabeer said:
I have android 2.1 currently on my vx6900, Id like to go back to close to stock Rom, but without all the verizon carrier "flavorings" and rescrictions.
Any ideas? Personaly I liked the simple clean useage of win 6.0 without all the extra graphics ( besides the HTC home plug in and the touch flo )
thanks in advance.
Click to expand...
Click to collapse
Try to get Barogi's latest "lite" rom. Also, you can't go wrong with vin's 28014 or NFSFan's rom. I would recommend mine, but I think they might be a little heavy for what you want. Good luck.
i checked out NSFSfan. It was nice, but waaaaaaaaaaaaaaay to much for what I want. Ill check out the other you suggested before i just flash back to stock rom
pasdabeer said:
i checked out NSFSfan. It was nice, but waaaaaaaaaaaaaaay to much for what I want. Ill check out the other you suggested before i just flash back to stock rom
Click to expand...
Click to collapse
Try to avoid stock if you can... it has a bad tendency of being too heavy on the extra apps.
I checked out just SS's of both. Both look awesome, but theres something about the simple look ( or im just used to it since my 8125 ) of the stock look. I would like to have the look but the added memory of a cooked rom.
With NSFSfans, could you remove the today screen plug ins to get back to a more stock look?
Im runnin 2.1 android eclair at the moment, and im barley pulling a full day battery with no data/bluetooth. With the old winmo, I was getting 2.5 days-3days. Thats another main concern for me.
figures, I like the way your rom looks the best! to bad hotfile lost the file : (
There is a temporary problem with accessing this file. Our technical team is resolving the problem right now.
HOTFILE.COM - Free one-click file hosting!
With us you can share big files easily and securely:
Just choose a file, click the "Upload" button and send the download link to your friends and anyone you know.
pasdabeer said:
figures, I like the way your rom looks the best! to bad hotfile lost the file : (
There is a temporary problem with accessing this file. Our technical team is resolving the problem right now.
HOTFILE.COM - Free one-click file hosting!
With us you can share big files easily and securely:
Just choose a file, click the "Upload" button and send the download link to your friends and anyone you know.
Click to expand...
Click to collapse
Which one are you looking for?
egzthunder1 said:
...As for your internet, you will probably need to set the correct username in the phone's programming as well (also info that you will need from Verizon, but it should be something like [email protected] or something like that)...
Click to expand...
Click to collapse
Verizon is [email protected]
Hello everyone.
I got these cell phone and I need help for the SW and the other things that are needed for this device.
Does anyone have this phone, I need help?
Canelis said:
Hello everyone.
I got these cell phone and I need help for the SW and the other things that are needed for this device.
Does anyone have this phone, I need help?
Click to expand...
Click to collapse
Not heard of this device. Perhaps a chinese copy of HD2.
OK, found something. It runs on Android, so you can only run Android apps. BTW what exactly you mean when you say things needed?
Need to se is it last SW, and need GPS for this phone.CoPilot Live- not work on this device !!
Canelis said:
Need to se is it last SW, and need GPS for this phone.CoPilot Live- not work on this device !!
Click to expand...
Click to collapse
It runs 2.2 (as mentioned on the web), I don't have any idea if it can be upgraded, as you may know 2.2 isn't the latest version.
For GPS, you can check its specs if it has GPS or not, if yes then you can install the apps from the market otherwise perhaps connect an external GPS, although I am not sure weather an external will work or not.
You can click on 'Thanks' button, if I helped.
Model number : T8585
Android version: 2.3.4
Based Version : MAUI.11AMD.W11.19.SP.V1,2011/6/23 00:50
Need "working" GPS !!!!!!!
Maybe it could help us to help you if you could post the link.
The chinese website where I saw this, mentioned Android 2.2.
Many app not work on this mobile !
Maybe this will help : - h**p://www.efox-shop.com/hd9-mtk6573-4-3-zoll-kapazitiver-touchscreen-handy-wlan-umts-android-2-2-gps-dual-kamera-dual-sim-bluetooth-p-236121
since it is running android, so the compatible android apps should run on it, but since its a Chinese clone, no guarantees.
You can trying looking at other android phones by HTC or some other brand, to be safe.
You can try this rom Update_HD2_3G.zip www.multiupload.com/XOVS2HZTHO to remove all chinese aplications and to improve everything.
forum.china-iphone.ru/viewtopic.php?f=22&t=15521
Installation Guide
http://forum.xda-developers.com/showthread.php?t=1423489
For fix GPS:
Enter *#*#3646633#*#*
Go to YGPS
Wait for the green satellites appear.
Go to NMEA Log
Click "save" wait 5 minutes and then click "stop". Repeat the process after 1 hour.
Is your cellphone the same of this?
fastcardtech.com/goods.php?u=41964&id=6655
I bought 1 of them.
Now HTC mobile phone is also very popular in China. But i am sorry i don't have it. It is a little expensive.
Is it upgradable to ICS???
.
Thread moved. Would advise you to read forum rules and post in correct section.
Yesterday I bricked my brand new P8000(B) - the new version with Marshmallow 'out of the box' (and the new SIM slots etc...)
I tryed to reflash several stock- and custom ROM's but they don't work because they are made for the 'old' version and there must be major differences in the hardware. At the moment the main problem is that the LCD driver is wrong and the display shows only lines and blurry spots
The Phone was running on ROM "P8000_6.0_20160516" - this ROM is not available at needrom or bbs.elephone.hk even Google doesnt know
It would help a lot if some could supply the ROM "P8000_6.0_20160516" - thank you!
FrauHofrat said:
Yesterday I bricked my brand new P8000(B) - the new version with Marshmallow 'out of the box' (and the new SIM slots etc...)
I tryed to reflash several stock- and custom ROM's but they don't work because they are made for the 'old' version and there must be major differences in the hardware. At the moment the main problem is that the LCD driver is wrong and the display shows only lines and blurry spots
The Phone was running on ROM "P8000_6.0_20160516" - this ROM is not available at needrom or bbs.elephone.hk even Google doesnt know
It would help a lot if some could supply the ROM "P8000_6.0_20160516" - thank you!
Click to expand...
Click to collapse
I can do nothing else than blaming you, I wrote a reply yesterday to the eragon forum that there's someone else who flashed -not even a custom rom- just the root .zip that was for the "old" p8000 and got his phone bricked the same way as you (LCD driver problem). That's why I asked for a dump/backup. It could have been useful for you too (as in this case) and for the other guy too. But nevermind, I hope that you learn from this for later things... anyways, the other guy has contacted elephone on their facebook, so I hope you'll get the rom so you can use your device again. Good luck!
I have this version too, just got it today.
If someone can explain to me how to create the scatter file and the backup, I'll do it.
I have some experience with this stuff, but MTKDroidTools tells me unknown rom structure.
Any help?
I do have the same problem (see here: http://forum.xda-developers.com/elephone-p8000/general/rom-p8000-t3431571 ). I just wanted to root the phone because I liked to change the wifi modem file but i didn't even realize that I got another version of the phone at this point, so I bricked it.
I also contacted the support via facebook, but the support guy had to ask the engineers for help.
But maybe someone can help Emileh taking a dump of his phone, that would be really great!
@ardrift
you are sooo right but I have'n expected that two phones of the same type contain conplete different hardware respectively the firmware is not supporting both hardware versions. Even the manufacturer does not metion to check the hardware version before flashing...
@Emileh @flo1k
I do have a second 'untouched' P8000(B) too - and I'm starving to copy the firmware from this working phone to the faulty phone if someone could explain how...
problem solved
flo1k managed to get a stock ROM for this hardware version - the softwarepackage is named K06TE-A.A.vR14.E1.160707 and should be available at the elephone forum soon....
Further information you can get here http://forum.xda-developers.com/elephone-p8000/general/2016-version-fingerprint-scanner-t3436270
Hi guys
please allow me to bring to you a problem thta is very very stressful.
I have a SM-N976B Note 10+5G, used in 4G/3G network and in 99% of the situation when an incoming call is on the screen, if I respond quick to the call the result is that the call is not established, and the phone is kind of freezing.
I need for almost every call to let the incoming call ring for more then 10 seconds and answer only after this time.
I done several updates and look on the internet for any solution to solve this annoing issue but without result.
Kindly help with any suggestion
thanks
Hi @cretu22
In order to anyone here to help you in any meaningful way, would be necessary that you provide the devices status/config.
- Is it rooted?
- Which ROM/Firmware?
- Did you already tried updating with a stock firmware that matches your region/country/provider exactly?
- Mods applied?
We will be watching.
Nice regards.
.
hi
thanks for your answer
- the phone is not rooted
-it has stock firmware for EMEA/Romania
- updated to the last firmware original OTA
-no mods, launchers, etc applied
- atttached snaps from phone
Hi @cretu22
From your screenshots I couldn't exactly pinpoint the firmware you've flashed because, as you can see on the link below, there is 2 different N976BXXU6DTH7. They differ by the CSC versions (N976BXXU6DTH7, N976BOXM6DTI2) despite having the same exact build date.
https://www.sammobile.com/samsung/galaxy-note-10-plus/firmware/SM-N976B/ROM/
Your baseband version is DTH5 which relates to the initial issue but unfortunately sammobile does not expose the baseband version of neither.
What I may suggest is that:
1st) try the DTH7 one of the above that you are not currently in.
2sd) if still doesn't solve the issue, try an older one with a different baseband.
I can see that the firmwares are only available to fast downloads @ sammobile so I shall suggest using Samfirm to help you on this and, consequently, flash them through ODIN.
https://samfirmtool.com/
Keep us updated of your findings.
Nice regards.
.
thanks
I will folow your suggestions
have a nice weekend
hi
i had made some reasearch on this issue and the onclusion was that the firmwares that the phone has are the original and recommended ones.
further I made some teste:
I close all applications on the phone and test receiving calls: answering very quickly works like a charm.
opening various applications like facebook, whattasp, etc and test receiving calls: answering very quickly is not working
so I should conclude that is not a problem of radio modem, but something related to running applications
thanks