Related
Hi,
I've just noticed the Performance settings menu under the CyanogenMod Settings menu and I wanted to give overclock and other features a try...safely.
I'm looking for increasing my Wildfire's performance in a remarkable way but without harming or causing any trouble to the phone. So I'd like to start in a quite conservative way.
What governor should I choose? (default: smartass)
What max and min CPU frequency? (default 518 and 352 Mhz)
What about the VM heap size? (default 24m)
What do you guys use as your settings?
Thanks a lot!
Governor : Smartass
CPU Speeds : 264 Min, 652 Max
VM Heap Size : 32 M
Remember, don't expect miracles by OC'ing your CPU. You'll probably be disappointed.
Thanks for answering!
In the meanwhile I set up 264 as min and 691 as max...is that too much and potentially dangerous?
No miracles indeed but the phone felt a bit more snappy when playing games for example.
Do you know where I can find some info about the different governors?
Also, what is exactly the VM heap size?
Thank you!
No, wont harm it. Only if you experience instability, reduce it to the next (Or rather, Previous) level.
CPU Governors:
* ondemand – Available in most kernels, and the default governor in most kernels. When the CPU load reaches a certain point (see “up threshold” in Advanced Settings), ondemand will rapidly scale the CPU up to meet demand, then gradually scale the CPU down when it isn't needed.
* conservative – Available in some kernels. It is similar to the ondemand governor, but will scale the CPU up more gradually to better fit demand. Conservative provides a less responsive experience than ondemand, but can save battery.
* performance – Available in most kernels. It will keep the CPU running at the “max” set value at all times. This is a bit more efficient than simply setting “max” and “min” to the same value and using ondemand because the system will not waste resources scanning for CPU load.
* powersave – Available in some kernels. It will keep the CPU running at the “min” set value at all times.
* userspace – A method for controlling the CPU speed that isn't currently used by SetCPU. For best results, do not use the userspace governor.
(The above wall of text is lifted from SetCPU's site)
In addition to that , Smartass is really the smart one. When your screen is on, the minimum frequency will automatically be set to 518 MHz, making your phone seem it is flying, and, when the screen is off, then, it reverts back to the minimum set value, and saves battery - Best of both worlds!
As for VM Heap Size, it is the maximum amount of heap space (i.e. memory) a single instance of the Dalvik VM (application) can obtain. Technical concept, but, you can read it up more if you like.
Thanks a lot for the insigthful reply, everything's clearer now!
i put everything on max. but thats just me. phone works fine though :L
Hi,
What's the best setting for my battery? It drains so fast.
Mine is as following:
Min.: 245 Mhz
Max.: 537 Mhz
INTERACTIVE
I have to charge the Phone every evening, thats a bit annoying.
Thank you in advance
When using the cyanogenmod settings for the cpu speed,setcpu isn't required anymore right?
Sent from my HTC Wildfire using XDA App
FrydaeXIII said:
When using the cyanogenmod settings for the cpu speed,setcpu isn't required anymore right?
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Yes, you are right. Conflicting apps are never recommended.
thanks for the tip...
Just out of curiosity, I always just use the default whenever i flash a new kernel, since Sense based ROMS don't come with the ability to change Governors, but OS Moniter gives you that ability.
What IS the difference between smartass, ondemand, powersave, conservative (what I'm on) and performance?
I guess I just never bothered to wonder about it before.
Sense roms can't change the governor stock, but if you install SetCPU then you can change it.
Each governor changes the frequency at a different type.
Performance will increase it faster when needed compared to the rest.
Conservative and powersave will scale up at a slower rate.
Smartass is like ondemand but should also automatically change the frequency when the screen is off and uses other variables to determine clock speed.
HipKat said:
Just out of curiosity, I always just use the default whenever i flash a new kernel, since Sense based ROMS don't come with the ability to change Governors, but OS Moniter gives you that ability.
What IS the difference between smartass, ondemand, powersave, conservative (what I'm on) and performance?
I guess I just never bothered to wonder about it before.
Click to expand...
Click to collapse
Nice read: http://www.mjmwired.net/kernel/Documentation/cpu-freq/governors.txt
surrealmethod said:
Sense roms can't change the governor stock, but if you install SetCPU then you can change it.
Each governor changes the frequency at a different type.
Performance will increase it faster when needed compared to the rest.
Conservative and powersave will scale up at a slower rate.
Smartass is like ondemand but should also automatically change the frequency when the screen is off and uses other variables to determine clock speed.
Click to expand...
Click to collapse
Thanks and I know Sense ROMS can't change the governor, but if you use OS Monitor, you can change it there, like I posted.
surrealmethod said:
Sense roms can't change the governor stock, but if you install SetCPU then you can change it.
Each governor changes the frequency at a different type.
Performance will increase it faster when needed compared to the rest.
Conservative and powersave will scale up at a slower rate.
Smartass is like ondemand but should also automatically change the frequency when the screen is off and uses other variables to determine clock speed.
Click to expand...
Click to collapse
Wrong.
Performance locks the cpu speed at the max freq. Powersave locks the cpu speed at the min freq. Ondemand scales to the max freq whenever a load is detected and slowly scales down according to the load. Smartass is not like ondemand. Smartass scales to the highest freq needed to accomodate a load and then scales down immediately when that load has been completed. Interactive is the inspiration for smartass. Interactive takes over the idle loop and scales to the highest freq needed to complete the load. The difference from smartass is that interactive must see that the load has changed from the first value for a certain amount of time before it decides to scale.
Op, this information could have easily been found in the forums by searching. However most people don't word it the way I have just done. Also, sense or aosp has nothing to do with changing governors. You can change the governors using terminal emulator. The apps just make it easier for users to do it without typing command lines.
Actually, I should have said, I did search, but all I found were maxi-technical terms and definitions, nothing in layman's terms
I am running Decks 1.3 with the SZ 2.2.1 CFS HAVS kernel and am wondering about the performance settings, not understanding what effects changing certain aspects will have. If I go into the performance settings, which is the best governor for combination of battery life/performance? Also, I don't understand how this correlates at all to the max cpu frequencies right below. Is the governor separate from the max cpu frequency? So if I change one, what impact will it have on the other. Right now I have it set to Conservative and the min cpu is 245, max is 499. Any input on this would be terrific!
The governor determines how the cpu scales between min and max frequency. While setting the min and max cpu frequency does exactly what it sounds like. So, the governor manages what speed the cpu is running at within the confines you put on it.
The different governors (smartass, conservative, savagedzen, performance, etc) will manage the scaling from min to max and max to min differently. If I remember correctly, performance scales up to max frequency very quickly when you use the phone, smartass takes into account what you are doing with the phone and scales the frequency more intelligently, savagedzen is specific to sz kernels and is based off smartass (just smarter), and conservative takes a while to scale up.
As for going from max to min frequency, I would assume the governors work the same way except for performance taking much longer to scale down (relatively).
I could be wrong, it has been a while since I changed my governor.
Found this in EVO 4G section, thought I would share.
CPU Governors explained
Thanks to deedii for posting this in another forum:
http://forum.xda-developers.com/show...65&postcount=2
Android CPU governors explained
What is a governor?
A governor is a driver for the regulation of CPUFreq - CPU frequency. As the name suggests, we, the Governor of the decision, when at full capacity, the MaxFreq - will be achieved or how fast the minFreq - - maximum frequency is reached minimum frequency or center frequency. He decides when, how and how long the CPU and still responds battery saving is still soft and still works.
There are many types of governors. Some are for single-core processors and some designed for dual-core processors. In stock kernel, there are five governors and quasar kernel, there are a lot more.
1: OnDemand
2: OndemandX
3: Performance
4: Powersave
5: Conservative
6: Userspace
7: Min Max
8: Interactive
9: InteractiveX
10: Smartass
11: SmartassV2
12: Scary
13: Lagfree
14: Smoothass
15: Brazilianwax
16: SavagedZen
17: Lazy
18: Lionheart
19: LionheartX
20: Intellidemand
21: Hotplug
22: Wheatley
23: Lulzactive
24: AbyssPlug
25. BadAss
26. Ktoonservative
27. AssWax
28. Sleepy
29. Hyper
1: OnDemand Governor:
This governor has a hair trigger for boosting clockspeed to the maximum speed set by the user. If the CPU load placed by the user abates, the OnDemand governor will slowly step back down through the kernel's frequency steppings until it settles at the lowest possible frequency, or the user executes another task to demand a ramp.
OnDemand has excellent interface fluidity because of its high-frequency bias, but it can also have a relatively negative effect on battery life versus other governors. OnDemand is commonly chosen by smartphone manufacturers because it is well-tested, reliable, and virtually guarantees the smoothest possible performance for the phone. This is so because users are vastly more likely to ***** about performance than they are the few hours of extra battery life another governor could have granted them.
This final fact is important to know before you read about the Interactive governor: OnDemand scales its clockspeed in a work queue context. In other words, once the task that triggered the clockspeed ramp is finished, OnDemand will attempt to move the clockspeed back to minimum. If the user executes another task that triggers OnDemand's ramp, the clockspeed will bounce from minimum to maximum. This can happen especially frequently if the user is multi-tasking. This, too, has negative implications for battery life.
2: OndemandX:
Basically an ondemand with suspend/wake profiles. This governor is supposed to be a battery friendly ondemand. When screen is off, max frequency is capped at 500 mhz. Even though ondemand is the default governor in many kernel and is considered safe/stable, the support for ondemand/ondemandX depends on CPU capability to do fast frequency switching which are very low latency frequency transitions. I have read somewhere that the performance of ondemand/ondemandx were significantly varying for different i/o schedulers. This is not true for most of the other governors. I personally feel ondemand/ondemandx goes best with SIO I/O scheduler.
3: Performance Governor:
This locks the phone's CPU at maximum frequency. While this may sound like an ugly idea, there is growing evidence to suggest that running a phone at its maximum frequency at all times will allow a faster race-to-idle. Race-to-idle is the process by which a phone completes a given task, such as syncing email, and returns the CPU to the extremely efficient low-power state. This still requires extensive testing, and a kernel that properly implements a given CPU's C-states (low power states).
4: Powersave Governor:
The opposite of the Performance governor, the Powersave governor locks the CPU frequency at the lowest frequency set by the user.
5:Conservative Governor:
This biases the phone to prefer the lowest possible clockspeed as often as possible. In other words, a larger and more persistent load must be placed on the CPU before the conservative governor will be prompted to raise the CPU clockspeed. Depending on how the developer has implemented this governor, and the minimum clockspeed chosen by the user, the conservative governor can introduce choppy performance. On the other hand, it can be good for battery life.
The Conservative Governor is also frequently described as a "slow OnDemand," if that helps to give you a more complete picture of its functionality.
6: Userspace Governor:
This governor, exceptionally rare for the world of mobile devices, allows any program executed by the user to set the CPU's operating frequency. This governor is more common amongst servers or desktop PCs where an application (like a power profile app) needs privileges to set the CPU clockspeed.
7: Min Max
well this governor makes use of only min & maximum frequency based on workload... no intermediate frequencies are used.
8: Interactive Governor:
Much like the OnDemand governor, the Interactive governor dynamically scales CPU clockspeed in response to the workload placed on the CPU by the user. This is where the similarities end. Interactive is significantly more responsive than OnDemand, because it's faster at scaling to maximum frequency.
Unlike OnDemand, which you'll recall scales clockspeed in the context of a work queue, Interactive scales the clockspeed over the course of a timer set arbitrarily by the kernel developer. In other words, if an application demands a ramp to maximum clockspeed (by placing 100% load on the CPU), a user can execute another task before the governor starts reducing CPU frequency. This can eliminate the frequency bouncing discussed in the OnDemand section. Because of this timer, Interactive is also better prepared to utilize intermediate clockspeeds that fall between the minimum and maximum CPU frequencies. This is another pro-battery life benefit of Interactive.
However, because Interactive is permitted to spend more time at maximum frequency than OnDemand (for device performance reasons), the battery-saving benefits discussed above are effectively negated. Long story short, Interactive offers better performance than OnDemand (some say the best performance of any governor) and negligibly different battery life.
Interactive also makes the assumption that a user turning the screen on will shortly be followed by the user interacting with some application on their device. Because of this, screen on triggers a ramp to maximum clockspeed, followed by the timer behavior described above.
9: InteractiveX Governor:
Created by kernel developer "Imoseyon," the InteractiveX governor is based heavily on the Interactive governor, enhanced with tuned timer parameters to better balance battery vs. performance. The InteractiveX governor's defining feature, however, is that it locks the CPU frequency to the user's lowest defined speed when the screen is off.
10: Smartass
Is based on the concept of the interactive governor.
I have always agreed that in theory the way interactive works – by taking over the idle loop – is very attractive. I have never managed to tweak it so it would behave decently in real life. Smartass is a complete rewrite of the code plus more. I think its a success. Performance is on par with the “old” minmax and I think smartass is a bit more responsive. Battery life is hard to quantify precisely but it does spend much more time at the lower frequencies.
Smartass will also cap the max frequency when sleeping to 352Mhz (or if your min frequency is higher than 352 – why?! – it will cap it to your min frequency). Lets take for example the 528/176 kernel, it will sleep at 352/176. No need for sleep profiles any more!"
11: SmartassV2:
Version 2 of the original smartass governor from Erasmux. Another favorite for many a people. The governor aim for an "ideal frequency", and ramp up more aggressively towards this freq and less aggressive after. It uses different ideal frequencies for screen on and screen off, namely awake_ideal_freq and sleep_ideal_freq. This governor scales down CPU very fast (to hit sleep_ideal_freq soon) while screen is off and scales up rapidly to awake_ideal_freq (500 mhz for GS2 by default) when screen is on. There's no upper limit for frequency while screen is off (unlike Smartass). So the entire frequency range is available for the governor to use during screen-on and screen-off state. The motto of this governor is a balance between performance and battery.
12: Scary
A new governor wrote based on conservative with some smartass features, it scales accordingly to conservatives laws. So it will start from the bottom, take a load sample, if it's above the upthreshold, ramp up only one speed at a time, and ramp down one at a time. It will automatically cap the off screen speeds to 245Mhz, and if your min freq is higher than 245mhz, it will reset the min to 120mhz while screen is off and restore it upon screen awakening, and still scale accordingly to conservatives laws. So it spends most of its time at lower frequencies. The goal of this is to get the best battery life with decent performance. It will give the same performance as conservative right now, it will get tweaked over time.
13: Lagfree:
Lagfree is similar to ondemand. Main difference is it's optimization to become more battery friendly. Frequency is gracefully decreased and increased, unlike ondemand which jumps to 100% too often. Lagfree does not skip any frequency step while scaling up or down. Remember that if there's a requirement for sudden burst of power, lagfree can not satisfy that since it has to raise cpu through each higher frequency step from current. Some users report that video playback using lagfree stutters a little.
14: Smoothass:
The same as the Smartass “governor” But MUCH more aggressive & across the board this one has a better battery life that is about a third better than stock KERNEL
15: Brazilianwax:
Similar to smartassV2. More aggressive ramping, so more performance, less battery
16: SavagedZen:
Another smartassV2 based governor. Achieves good balance between performance & battery as compared to brazilianwax.
17: Lazy:
This governor from Ezekeel is basically an ondemand with an additional parameter min_time_state to specify the minimum time CPU stays on a frequency before scaling up/down. The Idea here is to eliminate any instabilities caused by fast frequency switching by ondemand. Lazy governor polls more often than ondemand, but changes frequency only after completing min_time_state on a step overriding sampling interval. Lazy also has a screenoff_maxfreq parameter which when enabled will cause the governor to always select the maximum frequency while the screen is off.
18: Lionheart:
Lionheart is a conservative-based governor which is based on samsung's update3 source.
The tunables (such as the thresholds and sampling rate) were changed so the governor behaves more like the performance one, at the cost of battery as the scaling is very aggressive.
19: LionheartX
LionheartX is based on Lionheart but has a few changes on the tunables and features a suspend profile based on Smartass governor.
20: Intellidemand:
Intellidemand aka Intelligent Ondemand from Faux is yet another governor that's based on ondemand. Unlike what some users believe, this governor is not the replacement for OC Daemon (Having different governors for sleep and awake). The original intellidemand behaves differently according to GPU usage. When GPU is really busy (gaming, maps, benchmarking, etc) intellidemand behaves like ondemand. When GPU is 'idling' (or moderately busy), intellidemand limits max frequency to a step depending on frequencies available in your device/kernel for saving battery. This is called browsing mode. We can see some 'traces' of interactive governor here. Frequency scale-up decision is made based on idling time of CPU. Lower idling time (<20%) causes CPU to scale-up from current frequency. Frequency scale-down happens at steps=5% of max frequency. (This parameter is tunable only in conservative, among the popular governors)
To sum up, this is an intelligent ondemand that enters browsing mode to limit max frequency when GPU is idling, and (exits browsing mode) behaves like ondemand when GPU is busy; to deliver performance for gaming and such. Intellidemand does not jump to highest frequency when screen is off.
21: Hotplug Governor:
The “hotplug” governor scales CPU frequency based on load, similar to “ondemand”. It scales up to the highest frequency when “up_threshold” is crossed and scales down one frequency at a time when “down_threshold” is crossed. Unlike those governors, target frequencies are determined by directly accessing the CPUfreq frequency table, instead of taking some percentage of maximum available frequency.
The key difference in the “hotplug” governor is that it will disable auxillary CPUs when the system is very idle, and enable them again once the system becomes busy. This is achieved by averaging load over multiple sampling periods; if CPUs were online or offlined based on a single sampling period then thrashing will occur.
Sysfs entries exist for “hotplug_in_sampling_periods” and for “hotplug_out_sampling_periods” which determine how many consecutive periods get averaged to determine if auxillery CPUs should be onlined or offlined. Defaults are 5 periods and 20 periods respectively. Otherwise the standard sysfs entries you might find for “ondemand” and “conservative” governors are there.
Obviously, this governor is only available on multi-core devices.
22: Wheatley
in short words this govenor is build on “ondemand” but increases the C4 state time of the CPU and doing so trying to save juice.
23: Basically interactive governor with added smartass bits and variable (as opposed to fixed amout) frequency scaling, based on currently occuring cpu loads. Has, like smartass, a sleep profile built-in. See link for details on exact scaling.
24: Abyssplug governor is a modified hotplug governor.
25. BadAss Governor:
Badass removes all of this "fast peaking" to the max frequency. On a typical system the cpu won't go above 918Mhz and therefore stay cool and will use less power. To trigger a frequency increase, the system must run a bit @ 918Mhz with high load, then the frequency is bumped to 1188Mhz. If that is still not enough the governor gives you full throttle. (this transition should not take longer than 1-2 seconds, depending on the load your system is experiencing)
Badass will also take the gpu load into consideration. If the gpu is moderately busy it will bypass the above check and clock the cpu with 1188Mhz. If the gpu is crushed under load, badass will lift the restrictions to the cpu.
26, Ktonnservative
Ondemand scales to the highest frequency as soon as a load occurs. Conservative scales upward based on the frequency step variable which means for the most part will scale through every frequency to achieve the target load thresholds. What this practically means is ondemand is prone to wasting power on unneeded clock cycles. Ondemand also features something called a down differential, this variable determines how long the governor will remain at the given frequency before scaling down. Conservative does not have this, but instead relies on having a down threshold which insures that as soon as the load drops below a given variable it scales down as fast as the sampling rate allows. The result to this is a governor which attempts to keep the load level tolerable and save you battery! Now ! Ktoonservative Is that but in addition contains a hotpluging variable which determines when the second core comes online. The governor shuts the core off when it returns to the second lowest frequency thus giving us a handle on the second performance factor in our CPUs behavior. While by default conservative is a poor performer it can be made to perform comparably to even performance governor. Here are some settings to discuss and start with. They are slightly less battery friendly under a load but very very well performing.
27. AssWax
So far, all I have found about this Governor is that it belongs in the interactive family. I'll update this when I find more
28. Sleepy
The Sleepy (formerly known as Solo) is an attempt to strike a balance between performance and battery power to create. It is based on the getweakten Ondemand of Arighi and is optimized for the SGS2. It may include imoseyon's Ondemandx with some tweaks Down_sampling and other features that set by the user through the sysfs of "echo" call. Sleepy is the behavior of Ondemandx when he is in action, very similar.
29. Hyper
The Hyper (formerly known as kenobi) is an aggressive smart and smooth, optimized for SGS2 getweakt and, based on the Ondemand, which was getweakt of Arighi and was equipped with several features of Ondemandx suspend imoseyon. (Added by sysfs, the settings suspend_freq and suspend Imoseyon's code) is the behavior of the hyper Ondemand if he is in action, very similar. He also has the Arighi's fast_start deep_sleep and detection features. In addition, the maximum frequency is in suspend mode 500Mhz.
Credits goes to:
http://icrontic.com/discussion/95140...m-tuner-tegrak
http://forum.xda-developers.com/show....php?t=1369817
What is a scheduler?
In a multitasking operating system, there must be an instance, the processes that want to run, CPU time and allocates it "goes to sleep" after the allotted time (timeslice) again. This instance is called the scheduler, such as opening and closing applications. that is, how fast they are open and how long they are kept in RAM.
I / O scheduler can have many purposes like:
To minimize time searching on the hard disk
Set priorities for specific process requests
To regulate a particular portion of the bandwidth of the data carrier to each running process
To guarantee certain process requests within a certain time
Which scheduler are available?
CFQ
Deadline
VR
Simple
Noop
Anticipatory
BFQ
Sio
Anticipatory:
Two important things here are indicative of that event:
- Looking on the flash drive is very slow from Equip
- Write operations while at any time are processed, however, be read operations preferred, ie, this scheduler returns the read operations a higher priority than the write operations.
Benefits:
- Requests of read accesses are never treated secondarily, that has equally good reading performance on flash drives like the noop
Disadvantages:
- Requests from process operations are not always available
- Reduced write performance on high-performance hard drives
CFQ:
The CFQ - Completely Fair Queuing - similar to the Dead Line maintains a scalable continuous Prozess-I/O-Warteschlange, ie the available I / O bandwidth tried fairly and evenly to all I / O requests to distribute. He created a statistics between blocks and processes. With these statistics it can "guess" when the next block is requested by what process, ie each process queue contains requests of synchronous processes, which in turn is dependent upon the priority of the original process. There is a V2 and the CFQ has some fixes, such as were the I / O request, hunger, and some small search backward integrated to improve the responsiveness.
Benefits:
- Has the goal of a balanced I / O performance to deliver
- The easiest way to set
- Excellent on multiprocessor systems
- Best performance of the database after the deadline
Disadvantages:
- Some reported user that the media scanning would take this very very long time and this by the very fair and even distribution of bandwidth on the I / O operations during the boot process is conditioned with the media scanning is not necessarily the highest should have priority
- Jitter (worst case delay) can sometimes be very high because the number of competing with each other process tasks
Deadline:
This scheduler has the goal of reducing I / O wait time of a process of inquiry. This is done using the block numbers of the data on the drive. This also blocks an outlying block numbers are processed, each request receives a maximum delivery time. This is in addition to the Governor BFQ very popular and in many well known kernels, such as the Nexus S Netarchy. He was indeed better than the BFQ, but compared to the VR he will be weaker.
Benefits:
- Is nearly a real-time scheduler.
- Characterized by reducing the waiting time of each process from - best scheduler for database access and queries.
- Bandwidth requirements of a process, eg what percentage does a CPU is easy to calculate.
- As the Governor-noop ideal for flash drives
Disadvantages:
- If the system is overloaded, can go a lost set of processes, and is not as easy to predict
SIO:
It aims to achieve with minimal effort at a low latency I / O requests. Not a priority to put in queue, instead simply merge the requests. This scheduler is a mix between the noop and deadline. With him there is no conversion or sorting of requests.
Benefits:
- It is simple and stable. - Minimized Starvations (starvation) for inquiries
Disadvantages:
- Slow random write speeds on flash drives as opposed to other schedulers. - Sequential read speeds on flash drives, not as good
Noop:
The noop scheduler is the simplest of them. He is best suited for storage devices that are not subject to mechanical movements, such as our flash drives in our SGSII's to use to access the data. The advantage is that flash drives do not require rearrangement of the I / O requests, unlike normal hard drives. ie the data that come first are written first. He's basically not a real scheduler, as it leaves the scheduling of the hardware.
Benefits:
- Adds all incoming I / O requests in a first-come-who-first-served queue and implements requests with the fewest number of CPU cycles, so also battery friendly
- Is suitable for flash drives because there is no search errors
- Good data throughput on db systems
Disadvantages:
- Reducing the number of CPU cycles corresponds to a simultaneous decline in performance einhergehendem
VR:
Unlike other scheduling software, synchronous and asynchronous requests are not handled separately, but it will impose a fair and balanced within this deadline requests, that the next request to be served is a function of distance from the last request. The VR is a very good scheduler with elements of the deadline scheduler. He will probably be the best for MTD Android devices. He is the one who can make the most of the benchmark points, but he is also an unstable schedulers, because his performance falter. Sometimes they fluctuate below the average, sometimes it fluctuates above the average, but if above, then he is the best.
Benefits:
- Is the best scheduler for benchmarks
Disadvantages:
- Performance variability can lead to different results
- Very often unstable or unzverlässig
Simple:
As the name suggests, it is more of a simple or simple scheduler. Especially suitable for EMMC devices. He is reliable, maybe not as good as the VR, when this time has a good day, but he is despite all this very performance-based and does his best. At the moment it is the default scheduler in quasar kernel.
Advantages: - not known
Cons: - not known
BFQ:
Instead requests divided into time segments as the CFQ has, on the BFQ budget. The flash drive will be granted an active process until it has exhausted its budget (number of sectors on the flash drive). The awards BFQ high budget does not read tasks.
Benefits:
- Has a very good USB data transfer rate.
- Be the best scheduler for playback of HD video recording and video streaming (due to less jitter than CFQ Scheduler, and others)
- Regarded as a very precise working Scheduler
- Delivers 30% more throughput than CFQ
Disadvantages:
- Not the best scheduler for benchmarks - higher budgets that were allocated to a process that can affect the interactivity and bring with it increased latency.
How can I change the governor and scheduler?
There are two ways to change the governor and schedulers, as well as the settings for the Governorn. Either manually, in which you use a file manager like Root Explorer and then knows how to / sys / devices / system and then change the files to his wishes, provided you what you're doing, or via a graphical interface or by phone as SetCPU Voltage Control. These are the most prominent apps when it comes to adjusting the governor and / or scheduler.
- SetCPU are, besides the possibility of the clock speed of the CPU, setting profiles in certain situations, only to change the way the governor. The scheduler can not change it.
- Voltage control can alter both the governor and the scheduler, but has no way to adjust behavior profiles. While you can set various overclocking, Governor and scheduler profiles manually, but nothing more. Nevertheless, I prefer the VC, since it is simple and gives me the opportunity to change the scheduler.
Credit goes to Tinzdroid
Good find. I found that a few months ago when i had a few governor questions.
That's a lot of governors. Too many honestly. How's it go? "Too much of a good thing is bad" I'd say 29 +1 (pegasusq isn't listed) is just overkill given that a few are just custom rehashes of others that can be done via apps or scripts but I do understand the point. Seems we're getting to a point where we'll need to narrow it down to the gems though. For multi-core phones that list is small unless you do some editing and/or scripts as only a few (hotplug and pegasusq mostly, abyssplug too I think) are naturally multi-core aware. The rest will only use core0.
Good find though. Normally you only find ones with about 1/2 of them listed.
Sent from my SPH-D710 using xda app-developers app
How about a governor named "fantasy"? Have this on my tablet set as default one by manufacturer.
Aessaya said:
How about a governor named "fantasy"? Have this on my tablet set as default one by manufacturer.
Click to expand...
Click to collapse
Did a simple google search, found the following info at http://tabletrepublic.com/forum/novo-7-elf/cpu-running-1008mhz-696.html
Antutu cpu works better for me. and so far, i set my cpu speed at 912 max 60 min, fantasy governor. Because this tablet has high resolution and require cpu power, it is better not to set the cpu max speed too low.
And
http://www.slatedroid.com/topic/30592-apps-for-cpu-speed-mod-recommendation/
'fantasy' - This driver adds a dynamic cpu freq policy governor.
The governor does a periodic polling and changes frequency based on the CPU utilization.
The support for this governor depends on CPU capability to do fast frequency switching (i.e, very low latency frequency transitions).
lulzactiveq is my personal choice, but you need to tweak the values.
Thank you for the post!
Thank you for the write up, I've seen all of them, but didn't know until now how the user created ones worked over presets. This should be stickied for every device, applies to every android device I have.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ultimate battery guide
Battery, one of the most important thing on todays phones. Even if we have awesome battery life we always want more and it is never enough.
This is the small guide to tips, trick and tweaks to improve battery life.
This topic is to share tips and tricks and basically just small talk about battery and sharing screenshots.
Use Gsam or Android battery history to show your battery life.
Our goal is to make most of the screen on time with average use of 24 hours. So lets start.
Post 1: Tips
Post 2: ROMS, kernels, undervolting, underclocking
Tips to improve battery life
Location services
One of the first thing that your device will ask when you are setting up your phone. Most of the users let them ON and just forgot about them. Location services are battery hungry and the will drain your battery like you drinking juice.
Thing is that you do not need them always, just sometimes. Turn it OFF then. I have them turned off always and when I need it I just simple turn it ON.
Wi-Fi
Wi-Fi scanning is thing that will drain your battery always. When you are out and you are not expecting to use wi-fi any time soon turn it off. You do not need to run scanning all the time.
You could also edit build.prop to reduce.
Edit wifi.supplicant_scan_interval. Default value is 180. You can set it higher to reduce the scanning intervals.
Signal strength / Network mode
Signal strength is always trouble for battery. Weak signal will drain more battery. Also, constant changing between 4G/3G and 2G will drain battery faster.
Tweak to this is to set your phone to only use 2G, 3G or 4G.
Example: when I am not using my phone, or it is connected to wifi my network is on 2G. I dont need 3G or 4G then and changing network state is disabled then because it will stay always on 2G. I found it has positive effect on battery.
When I need, I just simple toggle 3G or 4G.
Screen brightness
Screen is the thing that drains most of our battery. There is not much philosophy here. Higher brightness will drain more battery.
My personal setup is that I do not use auto brightness. I always change brightness manually. Right now during winter my brightness does not go more then 25% outside, and inside it is lower. At night it is under 10%.
I found that not using auto brightness has also slight positive effect on battery.
Syncing / Airplane mode / Vibration / Animations / Task Killers
Lets start in order.
Syncing: more syncing your device does it drains more battery. On your phone probably you do not to sync all accounts and apps you have every few minutes or hours. Set those apps you do not need on manual sync.
Airplane mode: I am using airplane mode during night because I do not want to be disturbed during sleep. With airplane mode battery consumption during night is 0%. Yes, zero percent.
Vibration: more your device vibrates, more battery it drains. You can reduce vibrations on keyboard settings and similar. I found that is not much effect on battery but it has slight.
Animations: animations drains your battery also and who really needs them. Personally, I am annoyed with them and I always switch them to 0 or .5. You can do that in Settings-Developers options
Task Killers: task killers, clean maters and similar software is a big NO. You dont need it. It does more damage then good.
Bloatware
Yes, bloatware. There is huge amount of bloatware on our phones and we really do not need it. So, what to do? Freeze that bloatware.
You can find list of apps HERE.
ROMS and kernels
Custom ROMs and kernels will give you in most cases better battery life then stock firmware. Plus there is huge amount of options to play with. You can read more in posts bellow.
Summary:
If you change some of those thing you will see the effect.
You can always use apps like Greenify or Tasker and play with their options.
How to follow your battery life
GSam Battery Monitor
This one of the most useful apps to track your battery. On Lollipop (even on Kitkat) it will not give you much useful info without root.
If you are using it without root everytime you reboot the phone statistic would be reset also. If you have root it will give you access to wakelocks and some other stuff, plus stats would not get reseted.
Play store link
Wakelock detector
Wakelocks, one of the painful things on phone. If you see your battery is draining faster in idle then you got problem with wakelocks. This is useful app because it shows wakelocks on very simple setup and you can discover which app is causing which wakelock.
Play Store link
Disable service
If you are using Wakelock detector you need this app also. With this app you can freeze every single process that app can launch. It will provide detail look on all processes from apps. With this app I have reduced wakelocks to 1%.
Play Store link
ROMS
Discussion about ROMs never looked nice. It always gets to what you personally like. Some ROMs will be easier on battery, some will be rough. You will never know before you try them.
Kernels
Kernels are similar to ROMS but you can play with them. Currently there is not much kernels available but you can play even with stock one.
I recommend to use Trickster MOD Kernel Settings app to play with kernel settings.
Undervoting
Undervolting is the thing when you control how much power each CPU frequency can have. Trickster MOD app gives really nice view on them. You can undervolt every frequency by itself or all in one.
My personal recommendation is to undervolt them at once. I always use -50 value. Found it stable.
Of course, you can always play with different values but remember: when you play with this do not click on option "Set on Boot" or you will end in bootloop if you click it. Click that option when you find out that values are safe for using and stable.
Underclocking
Underclocking is changing your CPU frequency. Rough truth is that we dont need our CPU to run on 2,7 GHz in normal use. Only gamers will need that probably but since this is not thread were we are aiming gamers we dont need that high frequency.
Me personally, I use always 1,7 GHz or 1,9 GHz. To my daily usage (most common like everyone else but without games) this is more then enough. Everything is still smooth and runs fast.
Governors
A CPU governor in Android controls how the CPU raises and lowers its frequency in response to the demands the user is placing on their device. Governors are especially important in smartphones and tablets because they have a large impact on the apparent fluidity of the interface and the battery life of the device over a charge.
You can find explanation hidden here.
Many users have wrote about governors and they are practically the same on most of the phones so I will copy list from droidphile.
On his topic you have more details about governors.
Link to original topic: http://forum.xda-developers.com/galaxy-s2/general/ref-kernel-governors-modules-o-t1369817
I) MANUAL:
These are the 19 governors we're talking about.
1) Ondemand
2) Ondemandx
3) Conservative
4) Interactive
5) Interactivex
6) Lulzactive
7) Lulzactiveq
8) Smartass
9) SmartassV2
10) Intellidemand
11) Lazy
12) Lagfree
13) Lionheart
14) LionheartX
15) Brazilianwax
16) SavagedZen
17) Userspacce
18) Powersave
19) Performance
1) Ondemand:
Default governor in almost all stock kernels. One main goal of the ondemand governor is to switch to max frequency as soon as there is a CPU activity detected to ensure the responsiveness of the system. (You can change this behavior using smooth scaling parameters, refer Siyah tweaks at the end of 3rd post.) Effectively, it uses the CPU busy time as the answer to "how critical is performance right now" question. So Ondemand jumps to maximum frequency when CPU is busy and decreases the frequency gradually when CPU is less loaded/apporaching idle. Even though many of us consider this a reliable governor, it falls short on battery saving and performance on default settings. One potential reason for ondemand governor being not very power efficient is that the governor decide the next target frequency by instant requirement during sampling interval. The instant requirement can response quickly to workload change, but it does not usually reflect workload real CPU usage requirement in a small longer time and it possibly causes frequently change between highest and lowest frequency.
2) Ondemandx:
Basically an ondemand with suspend/wake profiles. This governor is supposed to be a battery friendly ondemand. When screen is off, max frequency is capped at 500 mhz. Even though ondemand is the default governor in many kernel and is considered safe/stable, the support for ondemand/ondemandX depends on CPU capability to do fast frequency switching which are very low latency frequency transitions. I have read somewhere that the performance of ondemand/ondemandx were significantly varying for different i/o schedulers. This is not true for most of the other governors. I personally feel ondemand/ondemandx goes best with SIO I/O scheduler.
3) Conservative:
A slower Ondemand which scales up slowly to save battery. The conservative governor is based on the ondemand governor. It functions like the Ondemand governor by dynamically adjusting frequencies based on processor utilization. However, the conservative governor increases and decreases CPU speed more gradually. Simply put, this governor increases the frequency step by step on CPU load and jumps to lowest frequency on CPU idle. Conservative governor aims to dynamically adjust the CPU frequency to current utilization, without jumping to max frequency. The sampling_down_factor value acts as a negative multiplier of sampling_rate to reduce the frequency that the scheduler samples the CPU utilization. For example, if sampling_rate equal to 20,000 and sampling_down_factor is 2, the governor samples the CPU utilization every 40,000 microseconds.
4) Interactive:
Can be considered a faster ondemand. So more snappier, less battery. Interactive is designed for latency-sensitive, interactive workloads. Instead of sampling at every interval like ondemand, it determines how to scale up when CPU comes out of idle. The governor has the following advantages: 1) More consistent ramping, because existing governors do their CPU load sampling in a workqueue context, but interactive governor does this in a timer context, which gives more consistent CPU load sampling. 2) Higher priority for CPU frequency increase, thus giving the remaining tasks the CPU performance benefit, unlike existing governors which schedule ramp-up work to occur after your performance starved tasks have completed. Interactive It's an intelligent Ondemand because of stability optimizations. Why??
Sampling the CPU load every X ms (like Ondemand) can lead to under-powering the CPU for X ms, leading to dropped frames, stuttering UI, etc. Instead of sampling the CPU at a specified rate, the interactive governor will check whether to scale the CPU frequency up soon after coming out of idle. When the CPU comes out of idle, a timer is configured to fire within 1-2 ticks. If the CPU is very busy between exiting idle and when the timer fires, then we assume the CPU is underpowered and ramp to max frequency.
5) Interactivex:
This is an Interactive governor with a wake profile. More battery friendly than interactive.
6) Lulzactive:
This new find from Tegrak is based on Interactive & Smartass governors and is one of the favorites.
Old Version: When workload is greater than or equal to 60%, the governor scales up CPU to next higher step. When workload is less than 60%, governor scales down CPU to next lower step. When screen is off, frequency is locked to global scaling minimum frequency.
New Version: Three more user configurable parameters: inc_cpu_load, pump_up_step, pump_down_step. Unlike older version, this one gives more control for the user. We can set the threshold at which governor decides to scale up/down. We can also set number of frequency steps to be skipped while polling up and down.
When workload greater than or equal to inc_cpu_load, governor scales CPU pump_up_step steps up. When workload is less than inc_cpu_load, governor scales CPU down pump_down_step steps down.
Example:
Consider
inc_cpu_load=70
pump_up_step=2
pump_down_step=1
If current frequency=200, Every up_sampling_time Us if cpu load >= 70%, cpu is scaled up 2 steps - to 800.
If current frequency =1200, Every down_sampling_time Us if cpu load < 70%, cpu is scaled down 1 step - to 1000.
7) Lulzactiveq:
Lulzactiveq is a modified lulzactive governor authored by XDA member robertobsc and is adapted in Siyah kernel for GS2 and GS3. Lulzactiveq aims to optimize the second version of luzactive from Tegrak by a) providing an extra parameter (dec_cpu_load) to make scaling down more sensible, and b) incorporating hotplug logic to the governor. Luzactiveq is the first ever interactive based governor with hotplugging logic inbuilt (atleast the first of its kind for the exynos platform). When CPU comes out of idle loop and it's time to make a scaling decision, if load >= inc_cpu_load CPU is scaled up (like original luzactiveq) and if load <dec_cpu_load, CPU is scaled down. This possibly eliminates the strict single cut-off frequency for luzactiveq to make CPU scaling decisions. Also, stand hotplug logic runs as a separate thread with the governor so that external hotplugging logic is not required to control hotplug in and out (turn On and Off) CPU cores in multi core devices like GS2 or GS3. Only a multi core aware governor makes real sense on muti-core devices. Lulzactiveq and pegasusq aims to do that.
8) Smartass:
Result of Erasmux rewriting the complete code of interactive governor. Main goal is to optimize battery life without comprising performance. Still, not as battery friendly as smartassV2 since screen-on minimum frequency is greater than frequencies used during screen-off. Smartass would jump up to highest frequency too often as well.
9) SmartassV2:
Version 2 of the original smartass governor from Erasmux. Another favorite for many a people. The governor aim for an "ideal frequency", and ramp up more aggressively towards this freq and less aggressive after. It uses different ideal frequencies for screen on and screen off, namely awake_ideal_freq and sleep_ideal_freq. This governor scales down CPU very fast (to hit sleep_ideal_freq soon) while screen is off and scales up rapidly to awake_ideal_freq (500 mhz for GS2 by default) when screen is on. There's no upper limit for frequency while screen is off (unlike Smartass). So the entire frequency range is available for the governor to use during screen-on and screen-off state. The motto of this governor is a balance between performance and battery.
10) Intellidemand:
Intellidemand aka Intelligent Ondemand from Faux is yet another governor that's based on ondemand. Unlike what some users believe, this governor is not the replacement for OC Daemon (Having different governors for sleep and awake). The original intellidemand behaves differently according to GPU usage. When GPU is really busy (gaming, maps, benchmarking, etc) intellidemand behaves like ondemand. When GPU is 'idling' (or moderately busy), intellidemand limits max frequency to a step depending on frequencies available in your device/kernel for saving battery. This is called browsing mode. We can see some 'traces' of interactive governor here. Frequency scale-up decision is made based on idling time of CPU. Lower idling time (<20%) causes CPU to scale-up from current frequency. Frequency scale-down happens at steps=5% of max frequency. (This parameter is tunable only in conservative, among the popular governors )
To sum up, this is an intelligent ondemand that enters browsing mode to limit max frequency when GPU is idling, and (exits browsing mode) behaves like ondemand when GPU is busy; to deliver performance for gaming and such. Intellidemand does not jump to highest frequency when screen is off.
11) Lazy:
This governor from Ezekeel is basically an ondemand with an additional parameter min_time_state to specify the minimum time CPU stays on a frequency before scaling up/down. The Idea here is to eliminate any instabilities caused by fast frequency switching by ondemand. Lazy governor polls more often than ondemand, but changes frequency only after completing min_time_state on a step overriding sampling interval. Lazy also has a screenoff_maxfreq parameter which when enabled will cause the governor to always select the maximum frequency while the screen is off.
12) Lagfree:
Lagfree is similar to ondemand. Main difference is it's optimization to become more battery friendly. Frequency is gracefully decreased and increased, unlike ondemand which jumps to 100% too often. Lagfree does not skip any frequency step while scaling up or down. Remember that if there's a requirement for sudden burst of power, lagfree can not satisfy that since it has to raise cpu through each higher frequency step from current. Some users report that video playback using lagfree stutters a little.
13) Lionheart:
Lionheart is a conservative-based governor which is based on samsung's update3 source. Tweaks comes from 1) Knzo 2) Morfic. The original idea comes from Netarchy. See here. The tunables (such as the thresholds and sampling rate) were changed so the governor behaves more like the performance one, at the cost of battery as the scaling is very aggressive.
To 'experience' Lionheart using conservative, try these tweaks:
sampling_rate:10000 or 20000 or 50000, whichever you feel is safer. (transition latency of the CPU is something below 10ms/10,000uS hence using 10,000 might not be safe).
up_threshold:60
down_threshold:30
freq_step:5
Lionheart goes well with deadline i/o scheduler. When it comes to smoothness (not considering battery drain), a tuned conservative delivers more as compared to a tuned ondemand.
14) LionheartX
LionheartX is based on Lionheart but has a few changes on the tunables and features a suspend profile based on Smartass governor.
15) Brazilianwax:
Similar to smartassV2. More aggressive ramping, so more performance, less battery.
16) SavagedZen:
Another smartassV2 based governor. Achieves good balance between performance & battery as compared to brazilianwax.
17) Userspace:
Instead of automatically determining frequencies, lets user set frequencies.
18) Powersave:
Locks max frequency to min frequency. Can not be used as a screen-on or even screen-off (if scaling min frequency is too low).
19) Performance:
Sets min frequency as max frequency. Use this while benchmarking!
Schedulers
Everything has been said about them so I will use droidphile explanations.
Link to original topic: http://forum.xda-developers.com/galaxy-s2/general/ref-kernel-governors-modules-o-t1369817
Q. "What purposes does an i/o scheduler serve?"
A.
Minimize hard disk seek latency.
Prioritize I/O requests from processes.
Allocate disk bandwidth for running processes.
Guarantee that certain requests will be served before a deadline.
So in the simplest of simplest form: Kernel controls the disk access using I/O Scheduler.
Q. "What goals every I/O scheduler tries to balance?"
A.
Fairness (let every process have its share of the access to disk)
Performance (try to serve requests close to current disk head position first, because seeking there is fastest)
Real-time (guarantee that a request is serviced in a given time)
Q. "Description, advantages, disadvantages of each I/O Scheduler?"
A.
1) Noop
Inserts all the incoming I/O requests to a First In First Out queue and implements request merging. Best used with storage devices that does not depend on mechanical movement to access data (yes, like our flash drives). Advantage here is that flash drives does not require reordering of multiple I/O requests unlike in normal hard drives.
Advantages:
Serves I/O requests with least number of cpu cycles. (Battery friendly?)
Best for flash drives since there is no seeking penalty.
Good throughput on db systems.
Disadvantages:
Reduction in number of cpu cycles used is proportional to drop in performance.
2) Deadline
Goal is to minimize I/O latency or starvation of a request. The same is achieved by round robin policy to be fair among multiple I/O requests. Five queues are aggressively used to reorder incoming requests.
Advantages:
Nearly a real time scheduler.
Excels in reducing latency of any given single I/O.
Best scheduler for database access and queries.
Bandwidth requirement of a process - what percentage of CPU it needs, is easily calculated.
Like noop, a good scheduler for solid state/flash drives.
Disadvantages:
When system is overloaded, set of processes that may miss deadline is largely unpredictable.
3) CFQ
Completely Fair Queuing scheduler maintains a scalable per-process I/O queue and attempts to distribute the available I/O bandwidth equally among all I/O requests. Each per-process queue contains synchronous requests from processes. Time slice allocated for each queue depends on the priority of the 'parent' process. V2 of CFQ has some fixes which solves process' i/o starvation and some small backward seeks in the hope of improving responsiveness.
Advantages:
Considered to deliver a balanced i/o performance.
Easiest to tune.
Excels on multiprocessor systems.
Best database system performance after deadline.
Disadvantages:
Some users report media scanning takes longest to complete using CFQ. This could be because of the property that since the bandwidth is equally distributed to all i/o operations during boot-up, media scanning is not given any special priority.
Jitter (worst-case-delay) exhibited can sometimes be high, because of the number of tasks competing for the disk.
4) BFQ
Instead of time slices allocation by CFQ, BFQ assigns budgets. Disk is granted to an active process until it's budget (number of sectors) expires. BFQ assigns high budgets to non-read tasks. Budget assigned to a process varies over time as a function of it's behavior.
Advantages:
Believed to be very good for usb data transfer rate.
Believed to be the best scheduler for HD video recording and video streaming. (because of less jitter as compared to CFQ and others)
Considered an accurate i/o scheduler.
Achieves about 30% more throughput than CFQ on most workloads.
Disadvantages:
Not the best scheduler for benchmarking.
Higher budget assigned to a process can affect interactivity and increased latency.
5) SIO
Simple I/O scheduler aims to keep minimum overhead to achieve low latency to serve I/O requests. No priority quesues concepts, but only basic merging. Sio is a mix between noop & deadline. No reordering or sorting of requests.
Advantages:
Simple, so reliable.
Minimized starvation of requests.
Disadvantages:
Slow random-read speeds on flash drives, compared to other schedulers.
Sequential-read speeds on flash drives also not so good.
6) V(R)
Unlike other schedulers, synchronous and asynchronous requests are not treated separately, instead a deadline is imposed for fairness. The next request to be served is based on it's distance from last request.
Advantages:
May be best for benchmarking because at the peak of it's 'form' VR performs best.
I/O Schedulers
Disadvantages:
Performance fluctuation results in below-average performance at times.
Least reliable/most unstable.
7) Anticipatory
Based on two facts
i) Disk seeks are really slow.
ii) Write operations can happen whenever, but there is always some process waiting for read operation.
So anticipatory prioritize read operations over write. It anticipates synchronous read operations.
Advantages:
Read requests from processes are never starved.
As good as noop for read-performance on flash drives.
Disadvantages:
'Guess works' might not be always reliable.
Reduced write-performance on high performance disks.