My dhd has no 3g connection??? - Desire HD Q&A, Help & Troubleshooting

I have been using the phone for a couple of days but I didn't realise until now that my phone doesn't have 3g data connection. I noticed when I am outside home, I can't check my gmail and have any access to internet. I am sure I have always have mobile data turned on.
My phone contract has unlimited data plan on three UK, but I am using it on my unlocked dhd from Orange UK.
Can anyone help?.
Many thanks
Sent from my Desire HD using XDA App

Have you put in the correct APN settings for your provider?

Yes, I tried and I see the 3G icon, but I can seem to receive any data. Anyone care to share their apn info on three network see if I got this right.
Sent from my Desire HD using XDA App

I wonder if flashing a new radio and firmware will help?

most probably due to your incorrect APN setting value. Try obtain the right APN setting for the telco line you are using.

is it because I am using a different network phone, so the APN setting of my current network isn't implemented by default, because I didn't have this problem with my iphone 4.
Anyone here is on Three UK can lend me a hand with this?

Finally found a combination that worked, there are quite a few variation out there over the internet.
I can verify this one works for the desire hd:
Name: 3
APN: three.co.uk
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: 3 MMS
MMSC: <not set>
MMS proxy: http://mms.um.three.uk:10021/mmsc
MMS port: 8799
MMS protocol: WAP 2.0
MCC: 234
MNC: 20
APN type: default

Related

UK APN Settings

Hello folks,
I am unable to get a data connection to T-Mobile on my Desire (Unlocked CPW, possibly pre-release firmware edition) and would really appreciate someone with a T-Mobile supplied & branded Desire posting the APN settings that work for them.
My phone is set up by default as follows (there is a second APN configured for Picture Message, which I am yet to try):
Name: T-Mobile Internet
APN: general.t-mobile.uk
Proxy: <Not set>
Port: <Not set>
Username: <Not set>
Password: <Not set>
Server: <Not set>
MMSC: <Not set>
MMS port: : <Not set>
MMS protocol: WAP 2.0
MCC: 234
MNC: 30
Authentication type: <Not set>
APN type: default
Thanks,
Edd.
You can get internet settings automatically by going to T-Mobile's website then "help and support" tab then "software and settings". Type your mobile number in choose desire then click GO!
Thanks for your helpful suggestion, but I have already been there and it tells me the following:
The number you have entered is invalid. Please re-enter.
Great, huh? That's why I'd like to know exactly what settings are going out on their own versions of the phone.
Edd.
Hi Edd, I have pretty much the same settings
under username and password use the following:
username: user
password: pass
I have user/pass working on mine and had these settings working on a Nokia N97 over the past year with the Web n Walk and Mobile Broadband plus booster.
UPDATE: Sorted now.
I just phoned T-Mobile to give them my PAC code (which arrived an hour ago), and it turned out that either they or CPW had not set up my account. By the end of the call, I had a 3G or H icon and everything working fine.
Thanks for your replies.
Edd.

[Q] Issues. YouTube does not work when on mobile network (3G HSPA). Works on WiFi

I have been wrestling with this issue for some days now. When I connect my Xperia Arc to a Wi-Fi network, absolutely everything works and plays. However, when I am only connected to the mobile 3G network, some apps won’t work. YouTube, Market, Weather, Maps, etc. will just hang there with a blank screen loading. I know the data connection is working when connected to the mobile network because I can use the browser, send and receive emails, sync contacts, etc. I can go to Wikipedia, for instance, and search for any topic I want.
In the particular case of playing videos from YouTube, I have the problem either with the app or if I try to play them directly from the browser on the YouTube site. I can search for the videos, get the thumbnails but it will not play them.
I am running LT15a firmware version 2.3.3. I have flashed back and forth 4 times already between the Rogers branded firmware and the generic north America one. I have tried hard resets (factory) as well. I have played with different settings when defining the APN. I am getting tired of re-entering all the settings over and over trying different things.
My phone is unlocked with a Telus SIM Card.
I will appreciate any help to resolve this.
Cheers,
The correct APN settings for Telus are (validated on android 4.0 ICS):
Name: Telus SP
APN: sp.telus.com
Proxy: <Not set>
Port: <Not set>
Username: <Not set>
Password: <Not set
Server: <Not set>
MMSC: http : // aliasredirect.net / proxy / mmsc << remove spaces here
MMS Proxy: 74.49.0.18
MMS Port: 80
MCC: 302
MNC: 220
Authentication type: <Not set>
APN type: <Not set>
APN protocol: IPv4
APN enable/disable: checked
Bearer: Unspecified
This settings were extracted from a Xperia Ray now available through Telus.
This question was asked nearly one year before??!?!!
arpith.fbi said:
This question was asked nearly one year before??!?!!
Click to expand...
Click to collapse
omG.!
WHAT A GOODNESS.!
:silly::laugh::victory::cyclops::crying::fingers-crossed:
CANT BELEIVE IT.
THIS QUESTION WAS ASKED NEARLY 1 YEAR BEFORE.!
LOL!
DONT HAVE ANY WORDS TO SAY MAN.

[Q] Connecting my S3 to AT&T data?

Greetings!
This afternoon I received my AT&T branded S3. A friend signed up for AT&T and wanted to keep his old phone so I purchased the S3 from him.
Upon booting up I am able to connect to the AT&T network, however data services are not working. I noticed that it was connecting to the PTA access point pre-setup on the phone so I tried adding the usual AT&T WAP access point (wap.cingular.com). I have had many "international" phones before so I am accustomed to setting up all of the settings myself. I am stuck here though as I am unable to figure this one out.
I would appreciate any and all help!
Thank you in advance,
Matt
data
i received mine today also. i tried cutting my galaxy s ll sim down and using it. i had not data. so i had to call att and it is a totally different data scheme for the 4g lte. i was on the phone for 45 minutes before all was fixed. i had the old grandfathered unlimited data plan and it was looking bad for a while, but they finally did some checking and over rode the system to modify my current unlimited data plan to work with the new s lll. i have never had a problem with the service i get from att, today was no different, they fixed me up and this phone is sweeeet. so it may be your problem also and have to switch to the new data for the 4g lte.
Solved!
Called AT&T, first level support tried reprovisioning my account (turn off phone, wait 2 minutes, call back), had me setup voicemail and then tried telling me my SIM was not a 4G sim (I cut down my old SIM, by old I mean 3 days old). Eventually got escalated to true tech support, they wanted to reprovision my account again, I let them know we just tried that but I'd be happy to do it again. Lo-and-behold this time it worked!
No change of data plan necessary, I had the 2GB plan from before.
I also had no date, but i just added a new apn and it worked. Try this:
Name: AT&T US HSDPA
APN: phone
Proxy: <not set>
Port: <not set>
Username: <not set>
Password:<not set>
Server:<not set>
MMSC: <not set>
MMS proxy: <not set>
MMS port: <not set>
MCC:310
MNC:410
Authentication type: <not set>
APN type: default
APN protocol IPv4
OMG
Fedex just dropped my phone!!
Man, this is really super nice looking phone!
I sold my Skyrocket like 2 weeks ago for this. Living with iCrap (iPhone 3GS) for 2 weeks was god awful experience (I gave my iPhone 4 to my wife so..). I'm like in heaven now....
ordered 6/6 premier, blue. bayarea Nocal. It's delivered like 2:15PM.
I hope everyone gets what they want as soon as possible....
Just had a buddy try the wap.cingular settings and it worked.
looking to use my S3 without calling in and changing my phone type. Leaving it at iphone so i can use both with no issues.
Does anybody have the full apn settings? is there a separate one for mms?
IpodLover77 said:
looking to use my S3 without calling in and changing my phone type. Leaving it at iphone so i can use both with no issues.
Does anybody have the full apn settings? is there a separate one for mms?
Click to expand...
Click to collapse
Name: AT&T WAP
APN: wap.cingular
Proxy: <not set>
Port: <not set>
Username: [email protected]
Password:<not set>
Server:<not set>
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC:310
MNC:410
Authentication type: <not set>
APN type: default
APN protocol IPv4
You need reprovisioning. PTA is the correct apn And necessary for lte. It will slow down all the way through 4g3g and edge. Mine does.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

lt28at - 3g not working

hi guys,
just got an xperia ion lt28at , 3g is not working on att, added the wap.cingular apn but i do not get a radio button besides it to enable it.
att pta apn is the only one enabled, i am on ics.
any help would be appreciated.
Thanks.
The PTA apn is the only one you should have in there. Did you get the phone from at&t or where did you get it from?
Sent from my Sony Xperia™ ion
bought it from another xda member, it's the at&t version of ion, just updated to ICS.
just factory reset the phone, went to add a new apn with the defualt one not enabled, and when i added default att hspa settings to new apn, i did see 4g in the notification bar but as soon as i saved the new apn it was gone and I can't enable the newly added apn.
munchy_cool said:
just factory reset the phone, went to add a new apn with the defualt one not enabled, and when i added default att hspa settings to new apn, i did see 4g in the notification bar but as soon as i saved the new apn it was gone and I can't enable the newly added apn.
Click to expand...
Click to collapse
If you factory reset it or flash the stock at&t ics and have an at&t sim in the phone you do not need to input any apn as it will download the settings for you.
Now if you did not have a LTE plan before getting the ion you will need AT&T to change your data plan to an LTE one. This does not cost anything extra and will not change anything other than allow you to use LTE. Even if you won't be using LTE in your area you need the LTE plan.
Sent from my Sony Xperia™ ion
Thanks for the information dude ..
sent from my limited edition red Gnex
just called at&t and they activated the phone on my account after asking the IMEI and data is up and running now .....
What if your on a prepaid plan and your unable to get the lte data , say like you have a go phone and use the sim you have in the att ion , is there a apn that acutually work's , I have the att ion and can't send picture 's , and have the apn set to wap.cingular and still no send pic's , have tried multiple apn's with no success can send text but just can't get the data to activate
norman68 said:
What if your on a prepaid plan and your unable to get the lte data , say like you have a go phone and use the sim you have in the att ion , is there a apn that acutually work's , I have the att ion and can't send picture 's , and have the apn set to wap.cingular and still no send pic's , have tried multiple apn's with no success can send text but just can't get the data to activate
Click to expand...
Click to collapse
post a couple screenshots of what apn you are using.
Sent from my Sony Xperia™ TL
Screenshot's
Here are some screenshot's of my current APN , just can't get Pic's to send from my phone , still looking for a fully functional APN
I used the apn from a Motorola atrix 4G
Sent from my LT28at using xda app-developers app
norman68 said:
Here are some screenshot's of my current APN , just can't get Pic's to send from my phone , still looking for a fully functional APN
Click to expand...
Click to collapse
That looks right. Might be an issue where you need an LTE enabled plan. I know when I had the Lumia 900 I couldn't do data till I got the LTE plan on my account even though I wasnt iin an LTE area.
Sent from my Sony Xperia™ TL
yeah , it send's pic's but take's awhile , I been planning on going back with a contract plan , so when I do it will more than likely correct that problem , lol , but i got this one to root but when i did the ICS update it locked the phone, So I can't root it . Waiting on a thread to come up so I can root it , this phone has truly been a challange , lol
norman68 said:
yeah , it send's pic's but take's awhile , I been planning on going back with a contract plan , so when I do it will more than likely correct that problem , lol , but i got this one to root but when i did the ICS update it locked the phone, So I can't root it . Waiting on a thread to come up so I can root it , this phone has truly been a challange , lol
Click to expand...
Click to collapse
The LT28at is easy to root. Just use bin4ry's .bat file after manually installing the backup & restore app
Ok Update on my data issue's , I flashed the generic international firmware to my Xperia Ion the Lt28h , and doing so I was able to enter all four APN's from a Motorola Atrix 4G.
Once I entered the APN's it showed my data working and now I am working on non LTE data , all four APN's I used are entered below , thank's guy's for all the help.
Name: AT&T US
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: <not set>
MMS Proxy: <not set>
MMS Port: <not set>
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: default,supl,agps,fota,dun
Name: AT&T US HSDPA
APN: phone
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: <not set>
MMS Proxy: <not set>
MMS Port: <not set>
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: default,supl,agps,fota,dun
Name: AT&T US Tether
APN: broadband
Proxy: wireless.cingular.com
Port: 80
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: <not set>
MMS Proxy: <not set>
MMS Port: <not set>
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: tether
Name: AT&T US MMS
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: mms

TELUS APN settings - November 6, 2012

These are current as of November 6, 2012. I have 2 APN's setup in my TELUS Samsung Galaxy S3.
This is the one selected (along with its info):
Name: TELUS SP
APN: sp.telus.com
Proxy: <Not set>
Port: <Not set>
Username: <Not set>
Password: <Not set
Server: <Not set>
MMSC: http://aliasredirect.net/proxy/mmsc
MMS Proxy: 74.49.0.18
MMS Port: 80
MCC: 302
MNC: 220
Authentication type: None
APN type: internet + mms
APN protocol: IPv4
Enable/disable APN: APN enabled (check marked)
Bearer: Unspecified
Here is the second APN in my phone (I'm not using this one, as it wasn't selected by default):
Name: TELUS ISP
APN: isp.telus.com
Proxy: <Not set>
Port: <Not set>
Username: <Not set>
Password: <Not set
Server: <Not set>
MMSC: <Not set>
MMS Proxy: <Not set>
MMS Port: <Not set>
MCC: 302
MNC: 220
Authentication type: None
APN type: dun
APN protocol: IPv4
Enable/disable APN: APN enabled (check marked)
Bearer: Unspecified
I thought I'd post to keep the info available for posterity's sake (and, you never know... if I update from my stock rooted ROM, I'll probably need these settings somewhere). And it's the latest, soooo...
Its been the same if I'm correct..also I've had to reenter my APN so many times I remember it by heart lol
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Those settings only seem to work on stock roms, maybe aosp roms as well but using M7 or serenity JB type roms data wont work, all the settings are ok but under apn settings use "default,mms,hipri" instead of the "internet + mms" and data should work. The internet+mms only seems to work on my gf's stock, non rooted ics phone doesn't work on my rooted JB
Sent from my Galaxy Nexus using xda premium
Shels said:
Those settings only seem to work on stock roms, maybe aosp roms as well but using M7 or serenity JB type roms data wont work, all the settings are ok but under apn settings use "default,mms,hipri" instead of the "internet + mms" and data should work. The internet+mms only seems to work on my gf's stock, non rooted ics phone doesn't work on my rooted JB
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
The ROM you're using shouldn't have any effect on the ability of the APN to work. The APN's are not based on the ROM you are using, rather they are carrier settings that determine if your phone will work on their network (I know you know that, I'm just stating the obvious so that *YOU* understand I also know what *I'M* talking about ).
Others will have to confirm if what you're stating is truly the case. Can anyone else comment, please?
Thanks!
Okie dok, just saying in my experience the "Internet + mms" does not get me any data using serenity or milestone roms. As long as ppl are getting help either way I say we're good lol
Sent from my SGH-I747 using xda premium
Shels is right, I have a telus s3 and any jb ROM I have flashed has had no data. I changed what Shels said and got data Thanks Shels
Problem solver
Thanks a bunch. I unlocked my bell s3 and the wife wanted it. She is with telus, everything but the data would work. This list helped immensely now it all works. As soon as I changed the apn setting to Internet and mms it took off. Thanks alot!!

Categories

Resources