I adapted the voices of Sygic, with a second of silence at the end that's what young generation Archos 8, I do not know why it does it and now I do not care.
At first he got a second to the end of each sound ogg, and not cut, but between each word had a second of waiting, so that seemed to say what a fool ... in order to filter a bit and have only silence the sounds they had just phrases, so if the sound is placed in the middle of a sentence you will notice a silence of 1 second.
What are the indications are very good, would not fault any stunt that makes the browser (turn right at the second round exit, etc. ..). When you have to assemble a sentence from scratch, sometimes you understand anything (example: take the national 666), but I give a 90% clarity.
They are in 5 languages, sorry for the Czechs, Arab, Croat and other non-adapted language users, but do not give for more.
Needless to say that if you use some trick, like the first start Copilot, or do not have the problem cuts, these voices can lead to inconsistencies in the information.
You can also use any other device that has the same error (which is long, as seen above)
Nothing more, try it and if you find any mistakes please do not hesitate to say so.
He adaptado las voces de Sygic, con un segundo de silencio al final,que es lo que corta la generación 8 de Archos,no sé por que lo hace y ya me da igual.
Al principio le metí un segundo al final a cada sonido ogg,y no se cortaba,pero entre cada palabra había un segundo de espera,a modo que parecía que se lo dijese a un tont... en fin que filtré un poco y solo tienen el silencio los sonidos que acababan las frases, así que si ese sonido es puesto en medio de una frase se notará un silencio de 1 segundo.
Lo que son las indicaciones van muy bien,diría que no falla ningún montaje que hace el navegador(gire a la derecha,en la redonda segunda salida,etc..).Cuando tiene que montar una frase desde cero,a veces no se le entiende nada(ejemplo:tome la nacional 666),pero le doy un 90% de claridad.
Están en 5 idiomas,lo siento por los checos, arabes,croatas y demás usuarios de lenguas no adaptadas,pero no doy para mas.
Ni que decir tiene que si se usa algún truco,como el de arrancar primero el Copilot,o no tienen el problema de los cortes,estas voces pueden provocar incoherencias en las indicaciones.
También se puede usar en cualquier otro dispositivo que tenga el mismo error(que los hay desde hace mucho,por lo que podido ver)
Nada mas,a probarlo y si encuentran algún error no duden en decirlo.
because of the quality of novice I can not include the complete link
voces Sygc +1seg español:
mirror 1 megaupload.com/?d=SX50OO90
mirror 2 multiupload.com/NI72Q5BGOM
voces Sygc +1seg multi5:
mirror 1 megaupload.com/?d=KJVHDMLM (update 10th March 2011)
mirror 2 multiupload.com/XKP696DN05 (update 10th March 2011)
I appreciate the work you have done for this, as it is a bad bug. However, the proper solution is to contact Sygic, as I have, and report this issue so they can address and correct it. I will give your modification a try though, at least until I hear back from them. That is, if English is one of the languages provided...
thanks, I agree that Archos should do the right thing
until then you can use this solution.
Multi5 is:
english_au_woman
english_man
english_us_woman
english_woman
french_man
german_woman
italian_woman
spanish_latin_man
spanish_latin_woman
spanish_man
spanish_woman
spanish_woman2
I've only tested lenguages sapanish and others prove that there is cut, the inconsistencies do not know why I do not understand the other languages, but as the files are equal and with the same name, I followed the same pattern.
saludos.
sonor0 said:
thanks, I agree that Archos should do the right thing
until then you can use this solution.
Multi5 is:
english_au_woman
english_man
english_us_woman
english_woman
french_man
german_woman
italian_woman
spanish_latin_man
spanish_latin_woman
spanish_man
spanish_woman
spanish_woman2
I've only tested lenguages sapanish and others prove that there is cut, the inconsistencies do not know why I do not understand the other languages, but as the files are equal and with the same name, I followed the same pattern.
saludos.
Click to expand...
Click to collapse
I tested your English voices, and it did the same thing - cut off prematurely.
if it really changed are the only Spanish, I feel the error and hope to find files quickly, otherwise I will have to rebuild again
a thousand pardons, patience
EDIT:solvented
sonor0 said:
if it really changed are the only Spanish, I feel the error and hope to find files quickly, otherwise I will have to rebuild again
a thousand pardons, patience
EDIT:solvented
Click to expand...
Click to collapse
Could you please explain how you are doing this? I'd like to attempt it on my own for the English files.
used pakExtract pair to extract files to compile paku ogg, adobe audition add a second to ogg I think they finished a sentence, leaving the final number with +1 seg and others no
sorry for the translation
Related
Why can nobody answer the question to get sound directed to MONO bluetooth headset? I see many people cooking roms, making apps, testing touch flow but nobody with a real answer for trinity with sound to Mono headset. Lets face it 95% of us are walking down the road with a Mono headset. I would like to here sound from the Media player and the GPS the most. Please dont tell me to search the forums. I have looked everywhere and tried hundreds of bluetooth apps in many different ways. Most of us are using one of the cooked roms from here(great work BTW) and there using MS BT stack. I would like to here from someone that has it working or can create an app. I will even donate to the cause.
have you read this post:
http://forum.xda-developers.com/showthread.php?t=278778
I hav'nt tried it, but it seems to work in some cases
/BeeBo
look at Bluetoothaudio here : http://www.trianglepowers.com/
I used this soft with my old QTEK8300, and it worked perfectly.
But currently, it doesn't work on my trinity + Faman 3.4.
Maybe it will work on your device ?
please let me know if it works for you, cause I really would like to have the GPS sounds directly on my samsung WEP200.
There is a simple MortScript which does this. I use it on my M700 and it works a treat.
tried everyone with multiple headsets!
Can anyone confirm that anyone has a Trinity working. I know it should be a simple app. Every app I've tired turns the bt on and can hear a hiss from it but still does not redirect sound!
b1cnrt73 said:
tried everyone with multiple headsets!
Can anyone confirm that anyone has a Trinity working. I know it should be a simple app. Every app I've tired turns the bt on and can hear a hiss from it but still does not redirect sound!
Click to expand...
Click to collapse
I use my helmet BT headset (mono device) to hear music, phone and gps from my Trini, while riding my bike. You can bet it works!
I explain everything in my scooter forum. Sorry but it´s in spanish and I have no time for translation
Fundamentalmente se trata de instalar un programa como el BTAudioOn.exe, que te direcciona todo el sonido hacia el "manos libres".
El programa BTAudioOn.exe te lo puedes bajar de aquí http://www.pdaphonehome.com/forums/...luetooth-headset.html?perpage=20&pagenumber=1
Los ficheros son ejecutables directos. No requieren instalación en la PDA. Los copias en la carpeta "Mis Documentos" o "Archivos de programa" (o la que quieras) y los ejecutas desde el explorador de windows, o desde un acceso directo (si usas algún programa que te permita tener iconos de acceso directo).
En realidad verás que son tres ejecutables:
1. BTAudioOn.exe para dirigir el sonido al Midland
2. BTAudioOff.exe para dejar de dirigir el sonido al Midland
3. BTAudioToggle.exe: es un interruptor que ejecuta si estáparado o para BTAudioOn si está en ejecución.
Te basta con meter en tu pda el 1 y 2 o sólo el 3 (no pasa nada si metes los tres!)
Para que funcione debes tener encendidos (y emparejados) la PDA y el Midland. Y como no, seleccionado el Midland en la PDA. Es decir el proceso normal cuando utilizamos el Midland como manos libres. Después ejecutas el BTAudioOn.exe y ya está!
En HTC P3600 hay que tocar le registro:
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Path = \Program Files\BTAudio\BTAudioOn.Exe
VoiceCmdDuration = 86400 (DEC) = 24 hours
Además, cuando uso el BTAudioOn.exe, después tengo que apretar el botón azul del Midland (el que hace de voice command) un par de veces y ya se calla la PDA y se oye por los cascos.
Además hay otro problemilla menor :
Si entra un llamada de teléfono o realizas una llamada el programa BTAudioOn.exe se corta y hay que volverlo a ejecutar. Y si estás en moto con guantes y tal es un rollito. La solución es un programa que se encarga de re-ejecutar el BTAudioOn, automáticamente.
- Descárgate e instala en tu PDA Mortscript. Lo tienes aquí http://www.sto-helit.de/modules/edito/content.php?id=38.
- Descárgate y guarda en tu PDA donde quieras este fichero sonido-bt.mscr desde http://mihd.net/ygu85k.
Este es el fichero que debes ejecutar ahora y no el BTAudioON.exe. El programa has de ejecutarlo en las mismas condiciones, es decir, ambos bluettoth encendidos y sincronizados. Muy importante: en este caso el BTaudioOn.exe debe estar en la carpeta "My Documents" de tu PDA. Queda residente encargándose de reconectar los dispositivos despues de una llamada.
Para que deje de estar en ejecución basta con apagar alguno de los bluetooth.
Hi. I've tried this (translated courtesy of Altavista's Babel Fish Translation Services), but to no avail. I can hear some sizzling noise on my bluetooth headset, but when I start an MP3 file, it still plays the audio through the phone's speaker. I have the P3600i. Can someone help please? Thanks!
Also no sound
Hi,
have you ever solved this problem?
I fear you haven't I read since days, my TRIN has the skipping problem, but neither unskipping tricks nor redirection works. What a shame.
IsiT_de...
i have never found a good solution. I am using a newer rom eligant 2.11 and it seems to work ok
Donation grant: 6.1 GER + A2DP on Trinity
Hi,
well, your advantage is that you are using an english ROM. I prefer a german one, and here, the choice is limited.
I just went back to WM5, what a shame, since 6.1 performed really well, except this A2DP problem.
I also can't understand why this problem exists - isn't it possible to extract the BT stack from the perfectly working WM5 and integrate it into the WM6? Probably not. If I am wrong: I am definitely going to donate more than a buck if anyone can get 6.1 + A2DP working on a german Trinity, w/o making the machine slow or something worse. And I bet there are other who would join me!
Anyone who feels like trying?
IsiT_de...
Hi to all friends of xda.
I'm new with the excelent xperia Arc. but need some help whith the Arc, when take a picture, how can silence the camera? in the properties can find off the sound. too, I also downloaded several programs like "spy" cameras but when the picture is taked, the sound appears.
Plis exists some way tho silence when take a photo.
model:lt15i android version:2.3.3 kernel version 2.6.32.9-perf build number: 3.0.1.A.0.146
Thanks a lot in advance.
P.D. Excuse my bad english
On my Arc (UK, unbranded/unlocked), when you're in the camera you press the menu button and a second set of options appears that includes one for 'Shutter sound', if you tap on that you have the choice of three different sounds and silent.
Do you not have that?
There is a thread on this here in general already, look around for it. You need root though.
Sent from my SO-01C using XDA App
maidguitar said:
There is a thread on this here in general already, look around for it. You need root though.
Sent from my SO-01C using XDA App
Click to expand...
Click to collapse
I disabled sound without root. Just swipe from left to right when ur in the camera app, then you should see shutter sound option. Hope this helps.
Hi, thanks for all.
unfortunately only have 3 options in the sound options and don't exist silence.
how i can put the silence "sound", change or add the silence option?
thanks to all.
P.D. is necessary root the phone?
itry doing the steps but did not work.
maidguitar said:
There is a thread on this here in general already, look around for it. You need root though.
Sent from my SO-01C using XDA App
Click to expand...
Click to collapse
plis can tell me which is, I try to look but could not find.
thanks
In some versions of the firm, like the Hong Kong branded, the "no sound camera" option doesn't exist. Try another branding like global generic.
Enviado desde mi LT15i usando Tapatalk
Yes.. You'll need to replace your firmware with uk or global generic.. Some of the eastern countries don't allow you to silence the camera...
Sent from The arc using XDA premium..
thanks to ric_ab and im_iceman.
i am new with the arc and have some questions: 1.- to replace the firmware is necessary root the phone?,2.- only the firmware is necessary replace or something more?.if i replace the firmware, the update's in the future , need do it i'm self or can be done by the sony update service.
thank for you help.
another question please , my phone have android 2.3.3, model lt15i and 3.0.1.A.0.146, what is the best firmware ofr replace?.
Thanks in advance.
.
maxsteel_mx said:
thanks to ric_ab and im_iceman.
i am new with the arc and have some questions: 1.- to replace the firmware is necessary root the phone?,2.- only the firmware is necessary replace or something more?.if i replace the firmware, the update's in the future , need do it i'm self or can be done by the sony update service.
thank for you help.
Click to expand...
Click to collapse
Hola, jeje creo que me será mas facil entenderte así.
Exactamente que quieres silenciar de la camara?, el sonido del obturador (cuando tomas foto) o la entrada del microfono cuando grabas algo?.
Es de telcel o lo compraste en otro lado?.. ya esta rooteado?
Hola rafuru, gracias por tu atencion, mira el telefono lo compre en otro lado, de hecho es de importacion (casia... aunque no se exactamente de que pais), esta libre y no esta rooteado,ahora, en cuanto al sonido, el sileciado es de la camara, pero si la camara se puede "silenciar" se extiende al video?... bueno como sea, mi objetivo es la camara, algunos amigos en los post anteriores me comentan que solo cambiando el firmware puedo hacerlo... tu que opinas, sera cierto? y de hecho si es cierto eso pues tengo algunas dudas(...jejeje..."algunas" ).
gracias y saludos
maxsteel_mx said:
Hola rafuru, gracias por tu atencion, mira el telefono lo compre en otro lado, de hecho es de importacion (casia... aunque no se exactamente de que pais), esta libre y no esta rooteado,ahora, en cuanto al sonido, el sileciado es de la camara, pero si la camara se puede "silenciar" se extiende al video?... bueno como sea, mi objetivo es la camara, algunos amigos en los post anteriores me comentan que solo cambiando el firmware puedo hacerlo... tu que opinas, sera cierto? y de hecho si es cierto eso pues tengo algunas dudas(...jejeje..."algunas" ).
gracias y saludos
Click to expand...
Click to collapse
Hmm se me hace extraño..
Mira, cuando quieres silenciar el obturador, en la camara pulsas la tecla de opciones (a la derecha de home) y esta la opcion de silenciar o cambiar el sonido del obturador.
De la misma forma se puede silenciar el microfono al momento de grabar video. Yo lo hacia aun sin actualizar el firmware.
Please provide a translation for english speaking members if you wish to converse in another language. (This is one of the forum rules)
Thanks
Por favor, proporcione una traducción para los miembros que hablan Inglés, si desea conversar en otro idioma. (Esta es una de las reglas del foro)
Gracias
Click to expand...
Click to collapse
Oh...... sorry.
"Rafuru Hi, thanks for your attention, look, the phone buy it elsewhere, in fact, is import (asia. .. though not exactly which country) is free and is not rooted, now in the sound, the camera need silence , but if the camera can "silence" extends to the video ...? Well, as my goal is the camera, some friends in the previous post tell me that just changing the firmware ... you think, will it? and indeed whether it is true that I have some doubts (... hehehe ... "some"?).
thanks and greetings
"
Mod edit - translated by https://www.deepl.com/translator:
Hello very good I have a problem, in game mode I added an application to view videos and listen to music xplayer why did you hear more loud and good I sent my screen to cast in what you saw everything you did on the phone drawers and everything I opened xplayer and put a movie and heard on TV all normal activate the game mode within xplayer already included in the gamer mode and began to hear on TV and on the smartphone I removed the gamer mode, restart, restore applications to default mode and nothing if I transmit something is heard in both places the problem is also the transmission speed that is not heard the same as I do to hear only on TV a greeting I hope it is something simple to solve
Translated with www.DeepL.com/Translator (free version)
*****************
Hola muy buenas tengo un problema ,en modo juego agregué una aplicación para ver vídeos y escuchar música xplayer por qué hacía que se escuchará más fuerte y bueno envié mi pantalla a cast en lo que se veía todo lo que hacía en el teléfono los cajones y todo abrí xplayer y puse una película y se escuchaba en la tele todo normal active el modo juego dentro de xplayer ya incluida en el modo gamer y se empezó a escuchar en la tele y en el smartphone lo quité el modo gamer ,reinicie , restaure aplicaciones a modo predeterminado y nada si transmito algo se me escucha en los dos sitio el problema también es la velocidad de transmisión que no se escucha igual como hago para que se escuche solo en la televisión un saludo espero que sea algo simple de resolver
Rubenciovit said:
...
Click to expand...
Click to collapse
Please use the English language! [¡Por favor, usa el idioma inglés!]
XDA Forum Rules (excerpt):
...
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
...
Click to expand...
Click to collapse
if you are only playing videos and music. it may be better for you to just use it normally outside of game space .
yes the quality of sound out of the phone speakers is better when using game mode but when watching on your tv you dont need sound in your phone as the TV is producing your sound.
just don't use gamespace when you want to warch or listen to something.
--------
si solo está reproduciendo videos y música. puede ser mejor que lo uses normalmente fuera del espacio del juego
sí, la calidad del sonido de los parlantes del teléfono es mejor cuando se usa el modo de juego, pero cuando se ve en la televisión, no se necesita sonido en el teléfono, ya que la televisión produce el sonido.
simplemente no uses el espacio de juegos cuando quieras buscar o escuchar algo.
Patrick Morgan said:
if you are only playing videos and music. it may be better for you to just use it normally outside of game space .
yes the quality of sound out of the phone speakers is better when using game mode but when watching on your tv you dont need sound in your phone as the TV is producing your sound.
just don't use gamespace when you want to warch or listen to something.
--------
si solo está reproduciendo videos y música. puede ser mejor que lo uses normalmente fuera del espacio del juego
sí, la calidad del sonido de los parlantes del teléfono es mejor cuando se usa el modo de juego, pero cuando se ve en la televisión, no se necesita sonido en el teléfono, ya que la televisión produce el sonido.
simplemente no uses el espacio de juegos cuando quieras buscar o escuchar algo.
Click to expand...
Click to collapse
Ya no se pone normal
Rubenciovit said:
Ya no se pone normal
Click to expand...
Click to collapse
Ni desactivado
puede cambiar el destino del audio en el menú desplegable de notificaciones. cuando está transmitiendo.
desplácese hacia abajo, elija opciones de sonido y destino de audio.
---
you can change the audio destination in the notification drop down. when you are streaming.
scroll down, choose sound options and audio destination.
hay rom y twrp para este movil?? , tiene que desbloquearlo xiaomi ?? el problema que tiene es: se rinicia con cualquier web, llamëse de pelis o cadenas de tv, en todas arranca cuando arranca bien. ya despues de un buen rato me dice que que vaya al cine a ver la peli, me lo ha echo hastres veces en la misma, tengo la duda de querer hacer con una piedra muchos moviles del mismo. TIENE ARREGLO???? Gracias...
MOD EDIT: Please post only in English according to the FORUM RULES or at least add an English translation below your foreign language(Google translator for example), translation added below:
is there rom and twrp for this mobile?? , do you have to unlock it xiaomi ?? the problem it has is: it is rinicia with any web, call it movies or TV networks, in all starts when it starts well. and after a good while he tells me to go to the cinema to see the movie, he has cast it to me hastres times in it, I have the doubt of wanting to make with a stone many mobiles of it. IT HAS FIXED???? Thank you...
Espero que todos los que esten leyendo este foro esten bien, bueno el punto es que quiero saber como solucionar el problema que tengo con los datos o si es una funcion clml desatarlo ya que he buscado mucho y no lo encuentro como solucionar eso.... .el punto es que mis datos al final del paquete de datos se apagan automaticamente a pesar de que aparecen en los ajustes que estan activados y quiero saber como configurarlos para que sean normales, o sea , si en la configuración está activado, entonces en la barra superior verá...muchos
Mod translation: I hope that everyone who is reading this forum is well, well the point is that I want to know how to solve the problem that I have with the data or if it is a clml function to untie it since I have searched a lot and I can't find how to solve that... ..the point is that my data at the end of the data packet is automatically turned off even though it appears in the settings that it is activated and I want to know how to configure it to be normal, that is, if it is activated in the settings, then in the top bar will see...many
@Obely
Greetings. As a "one time courtesy," I have translated your thread title and first post. Please post in English as stipulated by XDA Rule #4:
Spoiler: XDA Rule #4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Thank you: Badger50