Hi,
here is the kies-firmware released today by Samsung for Italian Galaxy S.
http://www.multiupload.com/LEJYFW42NM
PDA : I9000RSJS2
PHONE : I9000XXJPY
CSC : I9000ITVJS1
Build Info : 2011.01
Use Odin with no PIT and no Re-Partition option and put file in PDA field.
Rom Low Level Format for Odin
PDA JS2 + Modem JPY
CSC ITV JS1
Pass: esticbo
I add in the PDA the boot.bin and the sbl.bin from the JS5 so we can use this rom to come back from the JV1
No mirror Grazie
ro.build.display.id=FROYO
ro.build.version.incremental=RSJS2
ro.build.version.sdk=8
ro.build.version.codename=REL
ro.build.version.release=2.2.1
ro.build.date=2011. 01. 24. (월) 13:26:32 KST
And what about this update? Did you notice any change?
Fatece sapè
build date of this official release please?
i thought this was supose to be gb instead its the old 2.2.1 update
Can someone post Swype languages please, thx!
ro.build.display.id=FROYO
ro.build.version.incremental=RSJS2
ro.build.version.sdk=8
ro.build.version.codename=REL
ro.build.version.release=2.2.1
ro.build.date=2011. 01. 24. (월) 13:26:32 KST
Yeah, but I prefer keep XWJS5 with JPU modem and speedmod-kernel-13c, which work like a charm and surely is "newer" and better than RSJS2 IMHO
However, thanks man!
Sent from my GT-I9000 using Tapatalk
very good firmware.... just upgdare, i find it very smooth 1248 on quadrant no lagfix.
how to root? i can use z4root or oneclicketcetc (i don't remember the name)
cyberz said:
Yeah, but I prefer keep XWJS5 with JPU modem and speedmod-kernel-13c, which work like a charm and surely is "newer" and better than RSJS2 IMHO
However, thanks man!
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Why did you say the XWJS5 is newer?
Let's me explain..please
catfis said:
Why did you say the XWJS5 is newer?
Let's me explain..please
Click to expand...
Click to collapse
Built date. XWJS5 has a newer build date. I means that RSJS2 was built much earlier than XWJS5 but the latter was released first.
thelastsperance said:
very good firmware.... just upgdare, i find it very smooth 1248 on quadrant no lagfix.
how to root? i can use z4root or oneclicketcetc (i don't remember the name)
Click to expand...
Click to collapse
superoneclick should do the thing
Feedback on this rom?
esticbo said:
Rom Low Level Format for Odin
PDA JS2 + Modem JPY
CSC ITV JS1
Pass: esticbo
I add in the PDA the boot.bin and the sbl.bin from the JS5 so we can use this rom to come back from the JV1
No mirror Grazie
ro.build.display.id=FROYO
ro.build.version.incremental=RSJS2
ro.build.version.sdk=8
ro.build.version.codename=REL
ro.build.version.release=2.2.1
ro.build.date=2011. 01. 24. (월) 13:26:32 KST
Click to expand...
Click to collapse
It's not a good idea to mess with bootloaders, especially boot.bin
If boot.bin is corrupter/flash fails you have a completely bricked phone, not even a jig will save it.
sbl.bin is less risky, since if you have an intact primary bootloader (boot.bin) you can jig your way out. I think you should remove boot.bin from your package, since only the sbl.bin from JV1 is needed for to work anyway
Mothatt said:
It's not a good idea to mess with bootloaders, especially boot.bin
If boot.bin is corrupter/flash fails you have a completely bricked phone, not even a jig will save it.
sbl.bin is less risky, since if you have an intact primary bootloader (boot.bin) you can jig your way out. I think you should remove boot.bin from your package, since only the sbl.bin from JV1 is needed for to work anyway
Click to expand...
Click to collapse
+1
Sent from my GT-I9000 using XDA Premium App
kapollo said:
superoneclick should do the thing
Click to expand...
Click to collapse
yes i try it (1.7) but it says the phone is root and install superuser too, but when i issue the su command on terminal emulator the command fail, also roor explorer won't work.
start the program
plug the phone and when ask for the connection type i press back.
press the root button
and a list of "OK" appear on screen but when i press the test button no permission question came out... and the process says "test ok" !!!!
what i miss?
thelastsperance said:
yes i try it (1.7) but it says the phone is root and install superuser too, but when i issue the su command on terminal emulator the command fail, also roor explorer won't work.
start the program
plug the phone and when ask for the connection type i press back.
press the root button
and a list of "OK" appear on screen but when i press the test button no permission question came out... and the process says "test ok" !!!!
what i miss?
Click to expand...
Click to collapse
ok ok i have resolved. after a reboot the root begin to work
home switcher
home switcher don't work with this new firmware
Hi, I've already installed this rom but i can't find the AOSP lockscreen for this official I9000RSJS2 firmware, can you help me?
I've searched this in the forum but there's nothing..
Thanks!
Mothatt said:
It's not a good idea to mess with bootloaders, especially boot.bin
If boot.bin is corrupter/flash fails you have a completely bricked phone, not even a jig will save it.
sbl.bin is less risky, since if you have an intact primary bootloader (boot.bin) you can jig your way out. I think you should remove boot.bin from your package, since only the sbl.bin from JV1 is needed for to work anyway
Click to expand...
Click to collapse
+2
... moreover mangling with a different GSM_NATION_CODE (XW vs. RS)
If you actually want flash with PIT (512) and Re-partition, it would much better to build a 4-file CODE.tar only (ok for your empty dbdata.rfs), without boot & sbl binaries.
Related
i made this little update.zip just for testing with different modems anytime i want to, so it may be useless to most of u guys but i think some ppl may need it in some cases
the attached is ONLY a skeleton, the modem file inside the zip is an empty file
usage:
- open the update-modem-xxx.zip file and drag the modem.bin u want to flash in the zip and replace the zero size modem.bin in it (no need to chg other files), close the zip and that's all
- make copies of zip file for different modems if u wish (sorry but no time to make fancy file selection at the moment)
- flash the modem by selecting ur desire modem in cwm under /sdcard (pls refer to cwm page for how-to)
- no need to worry about recovery2e or 3x coz as long as u can run cwm, u r with recovery2e (or others in the future)
so possibilily, u can have update-modem-jpp.zip, update-modem-jpa.zip, and so forth
and for me, i've the following files on my sdcard:
update-modem-I9000XWJPA.zip
update-modem-I9000XXJPP.zip
update-modem-I9000ZSJP8.zip
update-modem-I9000ZSJPE.zip
why?
- provides a way to let u switch modem if u suspects the modem causes problems
- see if u can find the best modem for u
how?
- the modem will be flashed with redbend_ua, a direct write to ur phone's /dev/block/bml12
Note: ur phone will flick 2 or 3 times during flash
WARNING: i tested it on my phone with JPx, froyo 2.2 on galaxy i9000 only. I cannot say it's 100% safe although i flashed my phone a lot of times, so use it at your own risks
Also note that there will be NO updates in the future
EDIT: the redbend_ua is taken from somwhere, all credits go to the modder
+1 for this. Can i use this to change my csc too?
Sent from my GT-I9000 using XDA App
ragin said:
+1 for this. Can i use this to change my csc too?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
i've an update file to custom csc also
Can you post that? Please.
Sent from my GT-I9000 using XDA App
Very useful.
Thank you
Can somebody compile a zip file with JPE modem inside? I'm outside of my town for this week and I wanted to test JPE Modem, I just have my phone with me.
Please, thanks!
efegue said:
Can somebody compile a zip file with JPE modem inside? I'm outside of my town for this week and I wanted to test JPE Modem, I just have my phone with me.
Please, thanks!
Click to expand...
Click to collapse
here it is
ragin said:
Can you post that? Please.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
sure and attached
but i wonder why u need that coz the csc can be easily replaced
anyway, open the zip file, change all TGY (Hong Kong) to ur country/sales code, as well as rename the TGY directory to ur country/sales code. however, i've remove all localized apps from the csc (ie nothing except sales code, so u'll have to add urs if u want to)
Note that it does not "flash" anything to ur phone, instead it will create custom csc files on /system and /system/csc only
Thanks a lot ykk_five!!
OP, you could also just for "fun" include a .bat file, signapk.jar, testkeys and allow the user to drop in any modem and run the .bat to get a signed zip (ofcourse im targetting 2e users when i say this).
does anyone have specs on the modems signals ?
currently on jpo firmware and signal is very low
its not very good at home anytime with o2 but it would be nice to try them all to see if i get better reception .
has anyone compiled a full list of available modem files for froyo
ykk_five said:
sure and attached
but i wonder why u need that coz the csc can be easily replaced
anyway, open the zip file, change all TGY (Hong Kong) to ur country/sales code, as well as rename the TGY directory to ur country/sales code. however, i've remove all localized apps from the csc (ie nothing except sales code, so u'll have to add urs if u want to)
Note that it does not "flash" anything to ur phone, instead it will create custom csc files on /system and /system/csc only
Click to expand...
Click to collapse
Thanks for your effort, my problem is I keep flashing ROMS, & even the so called BIG APN list doesn't list all the providers of India. I use 2 of them & while with one I dont have a problem, with the other, I always need to feed APN settings everytime. I am an Architect, trigger happy & looking for readymade solutions so that I get more time for my profession.
Will you please do up a flashable update.zip for India? I can just flash it & all my settings are again correct.
Thanks again.
PS : If this can become like a repository of various modems & csc's, could be a HIT with people like me.
can someone give me the i9000ORO modem file ? i have jpa ver on my phone.
thx!
ragin said:
Thanks for your effort, my problem is I keep flashing ROMS, & even the so called BIG APN list doesn't list all the providers of India. I use 2 of them & while with one I dont have a problem, with the other, I always need to feed APN settings everytime. I am an Architect, trigger happy & looking for readymade solutions so that I get more time for my profession.
Will you please do up a flashable update.zip for India? I can just flash it & all my settings are again correct.
Thanks again.
PS : If this can become like a repository of various modems & csc's, could be a HIT with people like me.
Click to expand...
Click to collapse
i see...
i'm afraid not coz it requires some works to make a rom/kernel for a specific country
gt i9000m
can anyone provide modem for the galaxy s for bell . i use a rogers sim? but i have very poor signal .
If I am going to USA, which modem should I use (i.e. which modem is from a US version firmware)?
PLEASE READ THE THREAD BELOW BEFORE YOU FLASH ANY OF THESE !
http://forum.xda-developers.com/showthread.php?t=888071
http://fus.samsungmobile.com/Phone_...00OXAJMD_P1000XXJMB_P1000XXJMD_XX_ITV.zip.enc
Anyone can decrypt it???????
Edit:
PDA: P1000XXJMC
PHONE: P1000XXJMA
CSC: p2000OXAJMC
DECRYPT CODE: 2269661
decoder for decrypting enc files: http://dl.dropbox.com/u/11000050/Decoder.zip
flashed with odin 1.7 , no pit file , still froyo 2.2
need to flash dbdata after reboot http://forum.xda-developers.com/attachment.php?attachmentid=445398&d=1290261479
redesigned widgets, browser is fast ( no lag on scrolling......)
Quick review of JMC firmware: http://forum.xda-developers.com/showthread.php?t=886821
another firmware updated 24.12.2010
Modified: 10/12/24
PDA: P1000XXJMD
Phone: P1000XXJMA
CSC: P1000OXAJMD
Url: http://fus.samsungmobile.com/Phone_B...XX_ITV.zip.enc
Decrypt Code: 1446739
decripted file: http://www.multiupload.com/KHMVHJYZZ1
Modified: 10/12/29
PDA: P1000XXJME
Phone: P1000XXJMA
CSC: P1000OXAJME
Url: http://fus.samsungmobile.com/Phone_B...XX_ITV.zip.enc
Decrypt Code: 774584
Decrypted file: http://www.multiupload.com/3G1XLLY9V4
PDA: P1000XXJMG
Phone: P1000XXJMF
CSC: P1000OXAJMG
Decrypt Code: 1083448
Url: http://fus.samsungmobile.com/Phone_B...XX_ITV.zip.enc
Modified: 11/01/25
1. Model: GT-P1000 | Code: ITV | Version: P1000XXJMD/P1000OXAJMD/P1000XXJMB/P1000XXJMD | Date: 21.12.2010 08:48 | Size: 216,4 MB | ID: 27591803 <--- I think it's not correct.
source: http://twitter.com/samsungfusnews
2. Modified: 10/12/21
Lastest Firmware for: ITV
PDA: P1000XXJMC
PHONE: P1000XXJMA
CSC: p2000OXAJMC
DECRYPT CODE: 2269661
FROM FUS CHECK .... it shows the same URL as yours.
decrypted ok, thank you
cezarc1 said:
decrypted ok, thank you
Click to expand...
Click to collapse
what do you use to decrypt ? Thanks
cezarc1 said:
decrypted ok, thank you
Click to expand...
Click to collapse
can u share decrypt code, please?
thx
DECRYPT CODE: 2269661
was posted 2 posts up.......
decoder for decrypting enc files
http://dl.dropbox.com/u/11000050/Decoder.zip
2.2 or 2.2.1?
Sent from my GT-I9000 using Tapatalk
cezarc1 said:
decoder for decrypting enc files
http://dl.dropbox.com/u/11000050/Decoder.zip
Click to expand...
Click to collapse
thanks. yet decrypted
btw, have anyone here flashing already with this ROM? any report?
thx
flashed with odin 1.7 , no pit file , still froyo 2.2
need to flash dbdata after reboot
redesigned widgets, browser is fast ( no lag on scrolling......)
Hi Can you upload the file please
cezarc1 said:
flashed with odin 1.7 , no pit file , still froyo 2.2
need to flash dbdata after reboot
redesigned widgets, browser is fast ( no lag on scrolling......)
Click to expand...
Click to collapse
can u help me howto decrypt that encrypted file?
Code:
DecoderTest P1000_P1000XXJMD_P1000OXAJMD_P1000XXJMB_P1000XXJMD_XX_ITV.zip.enc -dec ???
I lost in that command.....please help
Better than JM6 so far ?
DecoderTest P1000_P1000XXJMD_P1000OXAJMD_P1000XXJMB_P1000XXJMD_XX_ITV.zip.enc 2269661
cezarc1 said:
flashed with odin 1.7 , no pit file , still froyo 2.2
need to flash dbdata after reboot
redesigned widgets, browser is fast ( no lag on scrolling......)
Click to expand...
Click to collapse
Please help me with odin 1.7
1) No pit
2) PDA file P1000XXJMC_P1000OXAJMC_P1000XXJMA_HOME
Did you select "Re-partition"?
Did you select "Auto-Reboot"?
Did you select "F. Reset Time"?
Where to get dbdata?
Thanks a lot, I'm a complete *NOOB*
Decrypted file:
http://www.multiupload.com/WOKU5D5U1Q
dbdata
http://forum.xda-developers.com/attachment.php?attachmentid=445398&d=1290261479
cezarc1 said:
dbdata
http://forum.xda-developers.com/attachment.php?attachmentid=445398&d=1290261479
Click to expand...
Click to collapse
Thank u!
Could you please answer to my other questions?
1) No pit
2) PDA file P1000XXJMC_P1000OXAJMC_P1000XXJMA_HOME
Did you select "Re-partition"?
Did you select "Auto-Reboot"?
Did you select "F. Reset Time"?
...and...you first flash this then you enter download mode again then flash dbdata.zip then reboot, correct?
THANKS A BILLION!
hmm...after I see this ROM I think I have first flashing to JM6 ---> JMA ---> then to this ROM
am I correct?
and what if my current ROM is an ASIA ROM (DXJK2), can I go directly to this rom?
thx a lot
Many people have been asking me how to get the combination of the stock Android 2.2.1 ROM, XWJS3 with the CSC and modem from the Asian DXJPE rom.
I decided to put up this procedure and downloads for those who want to try it.
I assume that you already know how to use Odin.
1. Download the XWJS3 PDA file, this file includes the SpeedMod K12P kernel already.
>>> DOWNLOAD LINK.
2. Download the DXJPB modem file below, and extract the .tar file inside the .7z file (DXJPB modem is from the DXJPE rom).
3. Flash the XWJS3 PDA tar as PDA using Odin, and DXJPB modem tar as MODEM.
No re-partition, no PIT.
4. Now you should get XWJS3 PDA and DXJPB modem, but no CSC.
5. Download the file below - it is a 7zip file that contains update-csc-olbjpa-xsp.zip. Extract the file update-csc-olbjpa-xsp.zip and put that in your internal SD card.
6. Reboot into the CWM Recovery and choose "Install ZIP, choose zip", then choose the update-csc-olbjpa-xsp.zip file above.
7. Now reboot your phone again and you should have the OLBJPA CSC with the XSP sales code selected.
----- About the CSC -----
The attached update-csc zip file contains a modified XSP sales code which has the APNs and MMS settings for all operators in the OLBJPA CSC - so that's all operators in Southeast Asia. I made this for my own convenience as I swap SIM cards from several countries a lot, but I figured it will be useful for most people living in SEA.
Reserved for future use.
Any possibility to have the native locale as SEA instead of Euro based?
just what i was looking for. nice one hardcore!
I got Force Close after lagfix, it seems only happen to I9000XWJS3 - "the process com.android.phone has stopped unexpectedly. please try again" any idea?
P.S: It works fine if only "Root", happen like this after lagfix has been done, I had tried to wipe all, reflash rom etc, it still happen same. has flash back to I9000DXJPE...
haha.. this is what im asking! thanks!
Thank u very much, Hardcore.
I've posted sometime ago in your Speedmode thread to ask u if u mind to share your rom, modem and csc. Finally... Happy to see this.
Hi Hardcore ,
would you add JPJPG modem to XWJS3 ? I think this is the way that lead us to have persian/arabic support on this rom...
Thanks a lot.
maybe u should format your internal memory card
darychia said:
I got Force Close after lagfix, it seems only happen to I9000XWJS3 - "the process com.android.phone has stopped unexpectedly. please try again" any idea?
P.S: It works fine if only "Root", happen like this after lagfix has been done, I had tried to wipe all, reflash rom etc, it still happen same. has flash back to I9000DXJPE...
Click to expand...
Click to collapse
darychia said:
I got Force Close after lagfix, it seems only happen to I9000XWJS3 - "the process com.android.phone has stopped unexpectedly. please try again" any idea?
P.S: It works fine if only "Root", happen like this after lagfix has been done, I had tried to wipe all, reflash rom etc, it still happen same. has flash back to I9000DXJPE...
Click to expand...
Click to collapse
i got that too when i tried doc's 9.1 dxjpe and hardcore's modified csc. doc said it was an issue but will address later.
amir_rafie said:
Hi Hardcore ,
would you add JPJPG modem to XWJS3 ? I think this is the way that lead us to have persian/arabic support on this rom...
Thanks a lot.
Click to expand...
Click to collapse
The modem has nothing to do with persian/arabic support.
Anyway, I believe webstar1 has done something. Go check out his thread.
Sent from my GT-I9000 using XDA App
Will it display chinese?
Will this work for AT&T Captivate
In fact I had did that each time when I flash new rom, it still same...
Yeah... This answer the mistery behind hardcore's mixed ROM status... Really what I'm looking for... Thanks hardcore...
@hardcore
Thanks for the rom - works great.
I seem to have a problem now with text messages not being correct.
Ex: Should say Power Off on menu, but says Sound is On.
My csc version says unknown.
Any ideas?
Seifer1975 said:
Will it display chinese?
Click to expand...
Click to collapse
Yes but no chinese input. Mighty be worth having a patch for that.
gcrutchr said:
@hardcore
Thanks for the rom - works great.
I seem to have a problem now with text messages not being correct.
Ex: Should say Power Off on menu, but says Sound is On.
My csc version says unknown.
Any ideas?
Click to expand...
Click to collapse
U might have used a modified resource apk like a battery icon mod. U have to make a new one matching this rom.
Thanks. I did use a JPY framework-res.apk. Will make a new one.
hardcore said:
Yes but no chinese input. Mighty be worth having a patch for that.
Click to expand...
Click to collapse
I am using the swype that has chinese input. So if I copy that over, I assume there should be chinese input right?
P1000_JMG_JMG_JMF_JMG_XX_ITV_OXA_STRIPPED
ro.build.builddate = 2011.01.21
ro.build.fingerprint = samsung/GT-P1000/GT-P1000/GT-P1000:2.2/FROYO/XXJMG:user/release-keys
http://www.multiupload.com/KEDNOCTJ5J
FOR YOUR SAFETY, I HAVE REMOVED THE BOOTLOADERS FROM THE PACKAGE. THE PACKAGE IS OTHERWISE UNMODIFIED
Enjoy!
EDIT: bdl1969 has posted a version that includes dbdata.rfs (needed for some upgrades) here: http://forum.xda-developers.com/showpost.php?p=10944109&postcount=21
Thank you!
Thanks for sharing Chainfire....
Appreciated
CF,
This zip/tar does not have dbdata in it and it wont load...had to load dbdata and works good now.
Maybe Roto can make a nice rooted version for us...or you can do a CWM/rooted version of this...seems to run nice and smooth.
Are there any constraints regarding flashing? Should I use Repart and the integrates PIT? Missing dbdata lets me assume not to use repart.
RiverSource said:
Are there any constraints regarding flashing? Should I use Repart and the integrates PIT? Missing dbdata lets me assume not to use repart.
Click to expand...
Click to collapse
If you're coming from an earlier JM* build then you shouldn't need to repartition as the partitions will already be correct.
Screen time out on this build is messed again...they fixed it in the last build and broke it on this one again! Baaahh!
rmanaudio said:
CF,
This zip/tar does not have dbdata in it and it wont load...had to load dbdata and works good now.
Maybe Roto can make a nice rooted version for us...or you can do a CWM/rooted version of this...seems to run nice and smooth.
Click to expand...
Click to collapse
I don't do cheffing anymore since years now ... dbdata isn't included in a lot of ROMs ("upgrade" ROMs).
I post them as I get them - this has been one rare case where I removed the bootloaders, but normally I do not do any modifications. Wait for someone like rotohammer to make it into something easy.
Chainfire said:
I don't do cheffing anymore since years now ... dbdata isn't included in a lot of ROMs ("upgrade" ROMs).
I post them as I get them - this has been one rare case where I removed the bootloaders, but normally I do not do any modifications. Wait for someone like rotohammer to make it into something easy.
Click to expand...
Click to collapse
Why no cooking?
rmanaudio said:
Maybe Roto can make a nice rooted version for us...
Click to expand...
Click to collapse
I've snagged a copy and hopefully I can work on this on the long flight home tomorrow.
rotohammer said:
I've snagged a copy and hopefully I can work on this on the long flight home tomorrow.
Click to expand...
Click to collapse
On a flight home? You are a LEGEND!
Thanks very much Chainfire. The CSC is a multi version for Europe and contains CPW, DBT, ITV, KOR, XEF, XEO, XEU. Does anyone know if the hidden.rfs can be flashed with Heimdal or do we need to use Odin to be able to include hidden.rfs?
Hello roto,
what about including ext4 conversion? I've readen so much in other threads, but i would like to have your opinion about as this is a major change and you were also right about the bootloaders. Pros/cons, and if yes how to work it out with your mod firmware.
Have a nice flight!
abuser0815 said:
Hello roto,
what about including ext4 conversion? I've readen so much in other threads, but i would like to have your opinion about as this is a major change and you were also right about the bootloaders. Pros/cons, and if yes how to work it out with your mod firmware.
Have a nice flight!
Click to expand...
Click to collapse
Yeah, I think its time to go ext4, and along with that the tools to flash upgrades from your /sdcard, its time to ditch the pc.
The GPS performance is amazing in this release. Just the display timeout does not work right away after a reboot.
Arabic Support
I wish this upgrade will have Arabic support. Its so annoying that this awesome device can't connect arabic letters I am not going to upgrade till rotohammer does his magic and gives his stamp of approval
Navigation with "Checking navigation availability" [SOLVED]
Successful flash with a struggle of dbdata.rfs.
Everything is on the test, but up to now, the app Navigation is running with "Checking navigation availability" and nothing else.
Does it happened to You?
KC
PS.
GPS' working properly, Place & Map are OK
SOLVED
Un-install the MAP, then start Navigation. The map would be installed by Navigation by itself.
I miss the ebook reader app in this rom.
Ebook is inside hidden.rfs
This rom seems to have the fixed gps, too.
WOOOOOT!!!
This ROM deffo needs dbdata.rfs included. I've just re-Tar's Chainfire's package to include the dbdata.rfs from JMA. As soon as the upload is finnished I'll post a link. I've flashed it to my Tab and it's flashed fine, it just gives a few FCs on apps after update which is to be expected.
Hi,
I have rooted the firmware for Indian Z1.
You can download it here and flash it with odin: http : // we.tl / 7LpO0xQgSZ
When flashed, your phone will not be wiped. Just execute: sdb root on
And you are root enabled.
Greetings from Feeyo.
cryptizen said:
Hi,
I have rooted the firmware for Indian Z1.
You can download it here and flash it with odin: http : // we.tl / 7LpO0xQgSZ
When flashed, your phone will not be wiped. Just execute: sdb root on
And you are root enabled.
Greetings from Feeyo.
Click to expand...
Click to collapse
Interesting.
If my Download finished... I will check if you find other way... or also su Binary from RTL Firmware...
It sounds interesting... because yours seems latest Firmware...
My old ANL7
Best Regards
Downloaded... not fully tested... BUT...
su Binary is not same... like here:
http://forum.xda-developers.com/showpost.php?p=59048890&postcount=73
I have posted rooted and working solution few months ago...
http://forum.xda-developers.com/showpost.php?p=59760907&postcount=104
Nobody tested...
I wish you more luck.
Best Regards
Hmm, I did not know you already had rooted the old firmware Good job. Looking at your posts is a little bit confusing though.
Anyhow, I can inject/enable root on any firmware. It is pretty easy. Takes like 1 minute to do so. If anyone needs a specific firmware to be rooted let me know.
I am currently searching for a way to flash our own kernel on the Z1. If you have found a way to extract the boot image, or know where to find the tool mkdzimage tool, I would love to hear it. As I can then create a dzimage as a cutom kernel.
Thanks!
About Kernel...
You have downloaded Source Code from here:
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=Z130
Is long time ago and I have only short tested, but I thought it is same like Android stuff I9000 and so on...
So unpack worked...
Need to check my posts again...
Best Regards
Edit 1.
Found what I have tried with Kernel...
dzImage can be unpacked as TAR file... if you cut the first 18699 Bytes... you can see text string uncompression error before + 1 ZERO Byte...
So 5 MB compressed Kernel is 10 MB uncompressed...
adfree said:
About Kernel...
You have downloaded Source Code from here:
Is long time ago and I have only short tested, but I thought it is same like Android stuff I9000 and so on...
So unpack worked...
Need to check my posts again...
Best Regards
Click to expand...
Click to collapse
I know where to get it. And it is not the same as Android.
It is so long ago and I have nothing really tested... short downloaded in february...
http://forum.xda-developers.com/showpost.php?p=58666129&postcount=182
For the moment I can not help you with Kernel stuff. Sorry.
Best Regards
adfree said:
About Kernel...
You have downloaded Source Code from here:
Edit 1.
Found what I have tried with Kernel...
dzImage can be unpacked as TAR file... if you cut the first 18699 Bytes... you can see text string uncompression error before + 1 ZERO Byte...
So 5 MB compressed Kernel is 10 MB uncompressed...
Click to expand...
Click to collapse
I can extract the kernel, that is not the issue. I need to find a way to repack it and create a dzimage to able to flash it with odin.
I need to find a way to repack it and create a dzimage to able to flash it with odin.
Click to expand...
Click to collapse
If no Tool nor script available... maybe do it manually...
I have no idea if something is signed at end of file... but before TAR file start... the header looks not impossible (to me) to correct with filesize etc...
If you compare 2 different dzImage ...
TAR start at offset 0x490B
I can't see differences bigger 2 Bytes...
Best Regards
Google search for:
mkdzimage
... leads to Gear projects... for instance here:
http://forum.xda-developers.com/gear-s/development/porting-android-gear-s-t2953513
If I use search on XDA...
http://forum.xda-developers.com/showpost.php?p=60789398&postcount=95
2. mkdzimage: which actually binds the image created by dtbtool with the zImage and builds a 'dzImage' to make the tar with it.
These two binaries are in the open source package, but are compiled for the ARM platform. So, you have to build the kernel, and then chroot into the development environment, and run them through QEMU to finish the job. This is the sickest thing I've seen in a long time.
Click to expand...
Click to collapse
Best Regards
@cryptizen
Can you please explain your changes to csc.img?
These are mandatory for your root solution?
I can see zImage inside...
Looks like SPRDDSP.img to me?
Best Regards
adfree said:
@cryptizen
Can you please explain your changes to csc.img?
These are mandatory for your root solution?
I can see zImage inside...
Looks like SPRDDSP.img to me?
Best Regards
Click to expand...
Click to collapse
No there have been no changes. Why do you think that changed?
And no there is no zImage inside...
csc.img:
Code:
drwxr-xr-x 2 root root 4096 Jul 1 13:41 app
drwx------ 2 root root 4096 Jul 1 13:41 lost+found
drwxr-xr-x 3 root root 4096 Jul 1 13:40 mps
drwxr-xr-x 5 root root 4096 Jul 1 13:40 preconfig
drwxr-xr-x 6 root root 4096 Jul 1 13:40 usr
cryptizen said:
No there have been no changes. Why do you think that changed?
And no there is no zImage inside...
csc.img:
Code:
drwxr-xr-x 2 root root 4096 Jul 1 13:41 app
drwx------ 2 root root 4096 Jul 1 13:41 lost+found
drwxr-xr-x 3 root root 4096 Jul 1 13:40 mps
drwxr-xr-x 5 root root 4096 Jul 1 13:40 preconfig
drwxr-xr-x 6 root root 4096 Jul 1 13:40 usr
Click to expand...
Click to collapse
I have donwloaded your Version from post #1...
Z130HDDU0BOG1_Z130HODD0BOG1_Z130HDDU0AOC3_HOME.tar
If I open this TAR file... I can see zImage inside...
Firmware to compare your TAR content... with Original/Stock Firmware Z130HDDU0BOG1
http://samsung-updates.com/device/?id=SM-Z130H
I have only short compared csc.img Binary in Total Commander...
And I saw minor differences to Original CSC...
and I was wondering why...
Anyway.
I have not tested your rooted Firmware, because I have some little problems and I am toooo lazy to fix them...
I am scared to loose some "gadgets" as in higher Firmware more Know and Restrictions are activated...
Maybe meanwhile someone else tested your Firmware and can confirm success?
I need someone, who has an idea... Where or how to insert Developer Certificate to get rid of this f. Cert Bulls... to install SDK Examples or to share few TPKs...
If I remember correct... RD-PQ etc. not need register new Cert to install SDK samples...
No idea yet, if this joke is again on TM1 (SM-Z300H developer device)...
Best Regards
adfree said:
I have donwloaded your Version from post #1...
Z130HDDU0BOG1_Z130HODD0BOG1_Z130HDDU0AOC3_HOME.tar
If I open this TAR file... I can see zImage inside...
Firmware to compare your TAR content... with Original/Stock Firmware Z130HDDU0BOG1
http://samsung-updates.com/device/?id=SM-Z130H
I have only short compared csc.img Binary in Total Commander...
And I saw minor differences to Original CSC...
and I was wondering why...
Anyway.
I have not tested your rooted Firmware, because I have some little problems and I am toooo lazy to fix them...
I am scared to loose some "gadgets" as in higher Firmware more Know and Restrictions are activated...
Maybe meanwhile someone else tested your Firmware and can confirm success?
I need someone, who has an idea... Where or how to insert Developer Certificate to get rid of this f. Cert Bulls... to install SDK Examples or to share few TPKs...
If I remember correct... RD-PQ etc. not need register new Cert to install SDK samples...
No idea yet, if this joke is again on TM1 (SM-Z300H developer device)...
Best Regards
Click to expand...
Click to collapse
You insert the certificates in the Tizen IDE. The IDE then uses the certificate to build the package, and you can install the package on your Z1.
Someone tested your ROOT Firmware?
I am too lazy.
1 reason is my own method work also with BOH1...
http://forum.xda-developers.com/showpost.php?p=62334048&postcount=152
"Simple steps"
- su 30 KB injected into rootfs.img
su Binary was leaked by R.L ANL7 Firmware...
Same su work with BOH1... only short tested, but SDB ROOT ON work...
For now I can't see sideeffects...
Someone asked for Firmware from Bangladesh... but I am too lazy to do this for every Firmware and upload and nobody try nor feedback...
If someone PM me...
Maybe then I could upload compressed BOH1 Firmware 370 MB... with su inside rootfs.img...
Best Regards
I am running my own rooted firmware. And it works perfectly.
If there is no feed back from users nor users want to try it. I will not post it any more. If anyone needs any firmware rooted they can request it to me.
cryptizen said:
I am running my own rooted firmware. And it works perfectly.
If there is no feed back from users nor users want to try it. I will not post it any more. If anyone needs any firmware rooted they can request it to me.
Click to expand...
Click to collapse
I´m definetely interested in trying it out, but i´m not a experienced linux person.
I mean, i know what i would like to do as root, like removing unwanted apps.
Tinkering around would be great (but i´m a little scared, cause it is my daily driver), but is there a solution to make a "non-cloud" local backup/dump
of the current system to recover it later, if something went wrong, perhaps similar to nandroid on CWM?
And does TIzen contain iptables?
Thanks!
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
... one more thing, cryptizen what did you manipulate/optimize on your firmware after you became root?
Thanks
I need to find a way to repack it and create a dzimage to able to flash it with odin.
Click to expand...
Click to collapse
Any progress with this?
mkdzimage is inside package:
SM-R750_Opensource.tar.gz
Taken from here:
opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=SM-R750
1400 MB to download...
Best Regards
exefixxer said:
I´m definetely interested in trying it out, but i´m not a experienced linux person.
I mean, i know what i would like to do as root, like removing unwanted apps.
Tinkering around would be great (but i´m a little scared, cause it is my daily driver), but is there a solution to make a "non-cloud" local backup/dump
of the current system to recover it later, if something went wrong, perhaps similar to nandroid on CWM?
And does TIzen contain iptables?
Thanks!
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
... one more thing, cryptizen what did you manipulate/optimize on your firmware after you became root?
Thanks
Click to expand...
Click to collapse
You could create a dump of the partition as root with dd command to make a backup.
And yes iptables v1.4.21 is installed.
adfree said:
Any progress with this?
mkdzimage is inside package:
SM-R750_Opensource.tar.gz
Taken from here:
opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=SM-R750
1400 MB to download...
Best Regards
Click to expand...
Click to collapse
I have that tool, but its crap to use. As it needs other versions of libraries and libc. I will need to create some virtual arm based image on my machine to just compile the kernel and use that mkdzimage..
And currently I do not have time for it.