Related
I've just driven over 400 miles...
I was using my Desire with Co Pilot to navigate me from Scotland to Bristol...
The phone was in my phone holder which is placed in the cigarette lighter so the phone can apparently be charged at the same time as being held...
The phone showed that it was "charging" and yet it still ran out of power....
That's right.. the CHARGING phone RAN OUT of power and switched off!!!!!!! TWICE!!!!!!!!
Has anyone else experienced this? I can't imagine that this phone uses more power than the charge being applied?!
I used my Desire as GPS (with Copilot) the phone had 70% - 80% battery and after sometime it actually charged to 100%. Maybe there is some malfunction in your car charger or just not making a good contact in cigarette lighter plug. Check if charger's led lights all the time.
car chargers trickle charge so they prob couldn't keep up with the demands of CoPilot on the phone
EddyOS said:
car chargers trickle charge so they prob couldn't keep up with the demands of CoPilot on the phone
Click to expand...
Click to collapse
You need to ensure that the car charger is rated at 1AMP at 5V otherwise it will as stated only trickle charge. I've heard this story on other devices. Do you have a genuine HTC charger?
Also if the device gets to warm, it will stop charging in order to avoid damage.
Thanks for the reply guys!
No, it's not a geniune one... I tried 2 different ones, both the universal holder/chargers from Mobile Fun..
So far they've both been fantastic until this little phone came along...!
Connections have been fine, which is the strange thing..
It did get hot though, so you may be right Ardsar... Any way of keeping it cooled?
Buy OEM...
http://www.google.co.uk/products?q=...ient=firefox-a&price2=15.00&show=dd&scoring=p
Always best as you know that it'll work...
i have had the same problem plugging it into my computer and using it at the same time killed it.
charmz2k2 said:
I've just driven over 400 miles...
I was using my Desire with Co Pilot to navigate me from Scotland to Bristol...
The phone was in my phone holder which is placed in the cigarette lighter so the phone can apparently be charged at the same time as being held...
The phone showed that it was "charging" and yet it still ran out of power....
That's right.. the CHARGING phone RAN OUT of power and switched off!!!!!!! TWICE!!!!!!!!
Has anyone else experienced this? I can't imagine that this phone uses more power than the charge being applied?!
Click to expand...
Click to collapse
me
http: //forum.xda-developers. com/showpost.php?p=6075788&postcount=11
http: //forum.xda-developers .com/showthread.php?t= 658338 (delete the spaces)
Same as what others say as well. Your car charger doesn't supply enough amps to keep up.
Ofcourse it gets really hot, navigation is one of the most heavy thing you can do on the phone. And while doing that you charge it at the same time in perhaps a warm car as well.
But, get a 1A charger, not a 500mah like most are.
Same goes for hooking it on the computer, the usb port might not give enough power so the phone can drain itself when doing real heavy stuff.
Plugging something in does not guarantee it will work, you have to know what you plug in
casualt said:
i have had the same problem plugging it into my computer and using it at the same time killed it.
Click to expand...
Click to collapse
Of course you will - USB ports can only supply upto 500mA if you have nothing else connected to the USB HOst.
Same story for me.
I got a 550 mA car charger, and battery wasn't charging but slowly discharging (about 5-10% per hour) with navi+HDSPA.
Thought, well, 550 mA is not enough, let's see the plug charger from Desire box: that's 1000 mA. Let's go get a 1A car charger.
Got this www . p4c.philips. com/cgi-bin/dcbint/cpindex.pl?ctn=DLM2206/10&slg=it&scy=IT (saw off spaces) which is rated 5V-1A.
Plugged in, started navigating+HDSPA for satellite layer, and still wasn't charging but discharging at a rate of about 4% per hour.
I'm really annoyed 'bout this, I spent 20+15€ for both chargers, I do not want to spend another 25€ for OEM charger....it's unbelivable that I'd finish to buy 60€ of chargers to find out one that do not let battery deplete.
As a final test, I'll try a different cable from original HTC sync cable included in the box...let's see.
EddyOS said:
Buy OEM...
http://www.google.co.uk/products?q=...ient=firefox-a&price2=15.00&show=dd&scoring=p
Always best as you know that it'll work...
Click to expand...
Click to collapse
Can anyone who has used this confirm it will manage to charge fully even while the Desire is running a satnav program?
Why don't you plug in your normal charger and start running a navigation demo or something.
Not sure if that uses as much energy, but I think it most probably will. The original charger outputs 1A.
If the socket charger does the job, but not the car charger (read: you can also run a navigation demo in the car using that charger) your car charger might not be supplying enough energy as it should.
Or you can use a multimeter and see how many amps it outputs. But the pins are a bit smallish
Tried with another cable (not the original sync one) with just power wires connected, same story: I'll try with the original wall plug charger and see if it does the same or not, as both the Philips charger and the original HTC wall charger are rated 5V-1A
It does get very hot. I used my gps for 9 hours in a row and at the end it got too hot or something and the phone just rebooted.
Still It wasn't because the battery had run out of juice it was still good.
Also it was streaming music over bluetooth at the same time.
Used Nav for 1 hour this morning on the way to work while charging from the official HTC car charger. Phone now sat on my desk, battery reporting 100%.
The phone did get pretty hot though...
FlatEric83 said:
Same story for me.
I got a 550 mA car charger, and battery wasn't charging but slowly discharging (about 5-10% per hour) with navi+HDSPA.
Thought, well, 550 mA is not enough, let's see the plug charger from Desire box: that's 1000 mA. Let's go get a 1A car charger.
Got this www . p4c.philips. com/cgi-bin/dcbint/cpindex.pl?ctn=DLM2206/10&slg=it&scy=IT (saw off spaces) which is rated 5V-1A.
Plugged in, started navigating+HDSPA for satellite layer, and still wasn't charging but discharging at a rate of about 4% per hour.
I'm really annoyed 'bout this, I spent 20+15€ for both chargers, I do not want to spend another 25€ for OEM charger....it's unbelivable that I'd finish to buy 60€ of chargers to find out one that do not let battery deplete.
As a final test, I'll try a different cable from original HTC sync cable included in the box...let's see.
Click to expand...
Click to collapse
FYI, not all chargers are equal. I believe that HTC devices need a combination of pins to be connected on the USB port to "tell" the phone that it's connected to a real charger and not a USB port, otherwise the phone will only pull 0.5A, regardless of the output capacity of the charger.
This always used to apply to older HTC phones, and I can't see why they'd change it, so it's quite possible that your 1A Philips charger will not charge the same as my 1A HTC charger...
If in doubt, OEM
daern said:
FYI, not all chargers are equal. I believe that HTC devices need a combination of pins to be connected on the USB port to "tell" the phone that it's connected to a real charger and not a USB port, otherwise the phone will only pull 0.5A, regardless of the output capacity of the charger.
This always used to apply to older HTC phones, and I can't see why they'd change it, so it's quite possible that your 1A Philips charger will not charge the same as my 1A HTC charger...
If in doubt, OEM
Click to expand...
Click to collapse
That's what I thought, as I imagined that: I hoped that another cable I have, which has USB on one side and a 2 poles connector on the other side on which you connect various connectors, would be recognized by Desire as being a pure power cable. I wasn't lucky.
Since OEM is out for 25€, I tried with non OEM before to save some, but till now I buyed 35€ worth chargers, I'd have to stick with OEM
But now I'm really reluctant on getting OEM, since I do not want to end with spending 60€ in order to have my phone charged while navigating....I'll try to tinker some, and if I'll find out how, I'll report
I had the same problem by using a 1.5A car charger which is working great with iPhone.
As for the PC USB charge... are you sure it can't output 1A to charge the device??
JapanLover said:
I had the same problem by using a 1.5A car charger which is working great with iPhone.
As for the PC USB charge... are you sure it can't output 1A to charge the device??
Click to expand...
Click to collapse
USB2 specs do say that ports shall provide max 500 mA, ehnce motherboards have this limit.
BTW, here's a discussion I've found about the "cable" problem
forum.xda-developers. com/archive/index.php/t-643808.html
For HD2 (which is actually the model to which HTC CC C200 is dedicated)
I'll try to tinker with some cheap cable and see if this works.
I've noticed this happening any time I tether via USB or use GPS navigation while plugged in. Even though I'm connected and charging, I slowly but surely discharge. This weekend I used Google Nav for 2 hours and lost 20% of my battery while charging! On Juice Plotter, I notice the green charging glow at the bottom is a more transparent shade of green (as opposed to solid green when solely charging). Any ideas what causes this or how to avoid it? It seems to be recent.
TheBiles said:
I've noticed this happening any time I tether via USB or use GPS navigation while plugged in. Even though I'm connected and charging, I slowly but surely discharge. This weekend I used Google Nav for 2 hours and lost 20% of my battery while charging! On Juice Plotter, I notice the green charging glow at the bottom is a more transparent shade of green (as opposed to solid green when solely charging). Any ideas what causes this or how to avoid it? It seems to be recent.
Click to expand...
Click to collapse
Let me guess, you're charging off a USB port in your laptop, or using the data cable that came with the phone in your car charger?
Not all USB sources (or cables, for that matter) are created equally. Most PC/laptop ports put out 500mAh, half of what the Evo is designed to take (the factory AC adapter, the wall plug, is 1000mAh, aka 1amp).
Since it's only getting half the draw it can't quite keep up with how much power you're sucking away from the battery. This is usually only present when using the device heavily, such as with the screen on and GPS or WiFi/3G actively running.
The charging indicator (at least on Sense) indicates if it's getting the full "AC" charge (1amp) or if it's getting a reduced current charge. Sounds like that's what you're noticing.
My wife's Samsung Moment charger is 700mAh/0.7amp, and it can keep my Evo steady during use (it's powering it for 3G+WiFi tether right now), but it doesn't really charge fast at all, basically it just keeps it from depleting.
I've been meaning to try one of the USB Y-cables that join 2 standard USB ports to one female port for combined power of 1amp, but I'm not sure it will work as I hope. Anyway, I'll report back if I get around to it.
Otherwise, use an actual 1amp AC adapter whenever possible. Shop on eBay, chargers are stupid cheap. Just look for one that says it can do 1amp/1000mAh. If you're using the phone at work and want to have a convenient charging source, get one of the $20 docking cradles with an AC adapter on eBay. If it's in your car, any 12v USB charger should work, as long as you use a proper pass-through charging micro USB cable and not a "data cable". There's a slight difference in how the pins are wired inside. The Rocket Fish brand of micro USB cables are known to work (that's how I charge mine at full power in my car).
Way to go GT. Are you a student? I'm an ME phd student.
Sent from my PC36100 using XDA App
sprocket87 said:
Let me guess, you're charging off a USB port in your laptop, or using the data cable that came with the phone in your car charger?
Not all USB sources (or cables, for that matter) are created equally. Most PC/laptop ports put out 500mAh, half of what the Evo is designed to take (the factory AC adapter, the wall plug, is 1000mAh, aka 1amp).
Since it's only getting half the draw it can't quite keep up with how much power you're sucking away from the battery. This is usually only present when using the device heavily, such as with the screen on and GPS or WiFi/3G actively running.
The charging indicator (at least on Sense) indicates if it's getting the full "AC" charge (1amp) or if it's getting a reduced current charge. Sounds like that's what you're noticing.
My wife's Samsung Moment charger is 700mAh/0.7amp, and it can keep my Evo steady during use (it's powering it for 3G+WiFi tether right now), but it doesn't really charge fast at all, basically it just keeps it from depleting.
I've been meaning to try one of the USB Y-cables that join 2 standard USB ports to one female port for combined power of 1amp, but I'm not sure it will work as I hope. Anyway, I'll report back if I get around to it.
Otherwise, use an actual 1amp AC adapter whenever possible. Shop on eBay, chargers are stupid cheap. Just look for one that says it can do 1amp/1000mAh. If you're using the phone at work and want to have a convenient charging source, get one of the $20 docking cradles with an AC adapter on eBay. If it's in your car, any 12v USB charger should work, as long as you use a proper pass-through charging micro USB cable and not a "data cable". There's a slight difference in how the pins are wired inside. The Rocket Fish brand of micro USB cables are known to work (that's how I charge mine at full power in my car).
Click to expand...
Click to collapse
I'm using the included charging cable. Doesn't that have full capacity? I also use a standard USB adapter in the car. It seems like that would be able to output the correct amount of volts.
gtkansan said:
Way to go GT. Are you a student? I'm an ME phd student.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
3rd year CmpE.
I had the same problem until I noticed how hot my phone was using the nav. 13 hour drive. I purchased a vent cradle for the car and so that it can stay cool while in use and charging. While the other guy may be right theoretically, its not right practically. The evo will shut off its mini usb hub once it starts getting dangerously hot so that it won't damage your phone. Long story short make sure your phone is at safe temps no need to buy another charger for your evo. keep at cool temps so that phone won't cut off power supply will even shut your phone down if its way to hot, happened to me in atlanta not fun.
"Insert Fancy Quote"
TheBiles said:
I'm using the included charging cable. Doesn't that have full capacity? I also use a standard USB adapter in the car. It seems like that would be able to output the correct amount of volts.
Click to expand...
Click to collapse
When you say "included charging cable" do you mean the wall plug that came with the Evo or just the cable with a USB connector on one end and a micro USB on the other end? Because THAT cable is pinned as a data transfer cable and designed to relay only half voltage no matter what you plug it into. I know, because it only charged my Evo at slow speed when plugged into my USB car charger. Once I replaced it with the Rocket Fish cable it charged at full speed.
kwilbur3 said:
I had the same problem until I noticed how hot my phone was using the nav. 13 hour drive. I purchased a vent cradle for the car and so that it can stay cool while in use and charging. While the other guy may be right theoretically, its not right practically. The evo will shut off its mini usb hub once it starts getting dangerously hot so that it won't damage your phone. Long story short make sure your phone is at safe temps no need to buy another charger for your evo. keep at cool temps so that phone won't cut off power supply will even shut your phone down if its way to hot, happened to me in atlanta not fun.
"Insert Fancy Quote"
Click to expand...
Click to collapse
See above. While I agree that heat will kill the battery and possibly trigger a shutoff, I don't think that's his problem. If you use the wrong cable or charger you will only get half charging current.
sprocket87 said:
When you say "included charging cable" do you mean the wall plug that came with the Evo or just the cable with a USB connector on one end and a micro USB on the other end? Because THAT cable is pinned as a data transfer cable and designed to relay only half voltage no matter what you plug it into. I know, because it only charged my Evo at slow speed when plugged into my USB car charger. Once I replaced it with the Rocket Fish cable it charged at full speed.
See above. While I agree that heat will kill the battery and possibly trigger a shutoff, I don't think that's his problem. If you use the wrong cable or charger you will only get half charging current.
Click to expand...
Click to collapse
I mean the USB cable that comes in the box with the EVO that plugs into the AC adapter. Maybe I will look into a new cable then. Hmm.
Edit: Those Rocketfish cables that you mentioned seem to be ungodly expensive. No way in hell am I going to pay more than $5 for a USB cable. Any alternatives?
TheBiles said:
I mean the USB cable that comes in the box with the EVO that plugs into the AC adapter. Maybe I will look into a new cable then. Hmm.
Edit: Those Rocketfish cables that you mentioned seem to be ungodly expensive. No way in hell am I going to pay more than $5 for a USB cable. Any alternatives?
Click to expand...
Click to collapse
This is the one I got: http://cgi.ebay.com/ROCKETFISH-MOBI...ARGING-CABLE-/350384355972?pt=PDA_Accessories
$3 shipped
And there are 2 USB cables that came with the Evo (mine anyway), a thick one that was bundled with the wall charger and a thin one that's intended just for data sync. The thin one doesn't seem to charge at full speed.
If you're using the other one and it's STILL draining then maybe there is an issue with heat or something, like the other guy said. Is the phone SUPER hot at the base, where the kickstand is, when this happens?
OP - I am having the same problem. I'm 95% sure it's caused by something wrong in CM6 regarding how it handles USB charging. Past few nightlies I have been leaving my phone on the charger doing NOTHING overnight and it goes dead.
This CANNOT be due to lack of charging strength:
#1 the same exact charger worked perfectly in the past, before I flashed a certain nightly - not sure which one exactly it started in
#2 if it was charging, but slowly why in the world would the battery drain when I have it underclocked to 245 mhz and the phone is sleeping with screen off?
On my standard charger that came with the phone it is working fine even though it's a USB that plugs into an adapter - not sure why this doesn't work with my other one that I had from another phone since it worked perfectly before. Something is definitely odd with CM6 and USB charging.
sprocket87 said:
This is the one I got: http://cgi.ebay.com/ROCKETFISH-MOBI...ARGING-CABLE-/350384355972?pt=PDA_Accessories
$3 shipped
And there are 2 USB cables that came with the Evo (mine anyway), a thick one that was bundled with the wall charger and a thin one that's intended just for data sync. The thin one doesn't seem to charge at full speed.
If you're using the other one and it's STILL draining then maybe there is an issue with heat or something, like the other guy said. Is the phone SUPER hot at the base, where the kickstand is, when this happens?
Click to expand...
Click to collapse
That's odd, because my EVO only came with the one cable for the adapter. Phone stays cool.
berardi said:
OP - I am having the same problem. I'm 95% sure it's caused by something wrong in CM6 regarding how it handles USB charging. Past few nightlies I have been leaving my phone on the charger doing NOTHING overnight and it goes dead.
This CANNOT be due to lack of charging strength:
#1 the same exact charger worked perfectly in the past, before I flashed a certain nightly - not sure which one exactly it started in
#2 if it was charging, but slowly why in the world would the battery drain when I have it underclocked to 245 mhz and the phone is sleeping with screen off?
On my standard charger that came with the phone it is working fine even though it's a USB that plugs into an adapter - not sure why this doesn't work with my other one that I had from another phone since it worked perfectly before. Something is definitely odd with CM6 and USB charging.
Click to expand...
Click to collapse
I've also noticed lately that my phone will charge insanely fast. Like from 30% to 90% in half an hour.
Sprocket - stupid question here... do these Rocket Fish charging cables also handle data transfer just as well as the stock micro-usb cable that came with the phone or would someone want to have one JUST for charging and keep their stock cable for data transfer purposes?
TheBiles said:
That's odd, because my EVO only came with the one cable for the adapter. Phone stays cool.
I've also noticed lately that my phone will charge insanely fast. Like from 30% to 90% in half an hour.
Click to expand...
Click to collapse
Sorry I was unclear - the other cable I have that is the problem is one from another phone but the same type, and up until recently it worked perfectly.
Hey guys,
I got my brodit active car holder now for a few days and it seems it doesn't supply enough juice to the S2 while in use :-(
While navigating with navigon, it even loses charge, though it's connected .... that's really disapointing, since brodit normally supplies quality products.
Anyone else got the brodit active holder with the same problems?
boba
Not got the Brodit, but I have the same problem when using CoPilot and charging via the USB cable attached to a car charger. It can keep the charge at current level with CoPilot on, but will only charge with CoPilot off.
Also noticed if SII has less than 50% charge, it won't charge at all with CoPilot on.
Taking a punt on one of these to see if it makes a difference:
http://www.buyincoins.com/details/d...-for-ipad-iphone-4g-ipod-2a-product-2748.html
Which holder do you have exactly? Can you make a photo?
Does it toggle car dock in the S2? You can see a steering wheel in notification bar.
ALexander
I was thinking exactly the same thing this lunchtime. I have the cigarete lighter active Brodit mount and - if i makes any difference - a 2004 Vauxhall Astra H. I as wondering if I would have to turn off the nice things [like satellite view, etc] on the phone for it to survive the journey. Not happy.
boba23 said:
Well I don't know the exact reason yet, but it seems the S2 doesn't accept enough juice from the charger,
Click to expand...
Click to collapse
Is the S2 in USB AC Mode?
Take a look here: Einstellungen - Telefoninfo - Status
Yesterday I modified a Brodit active car holder from the good old htc HD2 to fit the S2. Now I have fast charging (AC) and Car-Mode.
I currently own some chargers. Not the original one, well the UK Version with no use in Austria.
A 1A HTC Charger with USB socket, a 450mA noname charger with USB socket and a no name car charger with micro usb.
The car charger and the HTC charger show charging(AC) whilst the noname 450mA charger shows charging(USB)...
It would be interesting to measure the exact mA taken by the phone...
ALexander
CurrentWidget doesn't work...
ALexander
Hi all,
Okay, I've now tried four different chargers, and I've also had the phone replaced. Today, in a last attempt, I bought an official Samsung charger.
NONE of them work - even though the phone says "charging on AC" for all of them.
The only thing I haven't tried is a different car (which I'm going to do, once my neighbour gets home).
The one sensible suggestion I've read is that Samsung have screwed up somewhere in software and the phone can't draw enough juice.
Electronics is beyond my little brain, so I don't get why the GS2 charges from my netbook (even when it's only on battery) but won't charge in the car.
And I'm not talking when I'm using satnav. It won't charge at all. In fact (weirdly) it actually DISCHARGES much faster than it does if it's just sitting in my pocket.
I've logged this with my provider (Voda UK), because I refuse to get stuck with a useless phone for the next 18 months if this isn't sorted out. It's ludicrous. If I can't charge the phone in the car it's as good as useless to me.
UPDATE:
Okay, I just tried my neighbour's car (Vauxhall Astra) and the GS2 charged perfectly. 3% in four minutes. Pretty much what I get off the mains charger.
I wish I knew about electrics but I don't. Explanations will have to come from the boffins round here.
I tell you what, though. I don't really want to get a new car just to use my phone properly
Do you have any chsrger with a led?
If the led stays dark the cigarette lighgter of your car might need a new fuse.
Which car?
Sent from my GT-I9100 using XDA Premium App
Ive ordered one of these mounts and will report how it behaves in my 2008 Civic
barneypooch said:
UPDATE:
Okay, I just tried my neighbour's car (Vauxhall Astra) and the GS2 charged perfectly. 3% in four minutes. Pretty much what I get off the mains charger.
I wish I knew about electrics but I don't. Explanations will have to come from the boffins round here.
I tell you what, though. I don't really want to get a new car just to use my phone properly
Click to expand...
Click to collapse
You might be able to change to a higher amp fuse in your car fusebox.
eddablin said:
You might be able to change to a higher amp fuse in your car fusebox.
Click to expand...
Click to collapse
ROFL!! Genius!
Brodit mount arrived and looks great. Fit and design excellent and seems to charge as I would want.
Sent from my GT-I9100 using Tapatalk
So what charger do you guys advice? Which charger does charge the phone, even while navigating with Navigon?
I got the Brodit active charger (BR512...), there isn't a problem with charging at all.
I think the issue you got is really car related. My guess:
a) your cigarette lighter port is poorly wired -> Measure voltage at the port with a voltmeter, it should be at least 12V DC (Edit: Even if it does there is still the possibility that your wiring is bad, showing 12V doesn't mean it can handle the current this charger needs)
b) your cigarette lighter port doesn't make a good contact to the brodit plug. Check for corrosion of the contacts, dust, dirt, etc. Some ports go bad after lots of plug in / out cycles.
If you have no idea what I'm talking about here, I'm pretty sure every car mechanic can fix your problem for a small amount of money
Edit: it's very possible this plug works with other chargers and phones and still fails with the S2 charger. The reason for this is the different ways chargers convert the car's 12V DC into 5V DC. Some might work down to 7V input, some already **** up at 11.8V
I have the same problem with my GSII trying to charge it with my 12V Ipod adapter...
I just arrive from a short travel with my Citroën Xsara and i almost got lost cose the phone discharged all the time while using IGO on the phone...
I don't think this is car related because there are so many people with different cars having this problem... so... Samsung wants me to buy a new car to be able to use their phone in travels?
Hi guys, just thought I'd try to clear up a few of things:
1. All phones can use more power than they can draw. Note that the more apps you use, the more juice you draw depending on their features.
2. Not all CLAs are the same. Most modern devices will need 2amps, but the majority of CLAs on the market are 1 - 1.2amp units.
3. Your device will stop charging if it reaches a certain temperature, without giving you any further indication that it is too hot. This is a common scenario if you've got a phone on the dash giving guidance, with the sun rays beating a back. And yes this does mean dedicated satnav devices have a greater operational temperature range than phones, usually a 15-20 degree difference (celcius).
4. If the CLA is being tripped out due to poor isolation (a lot of cars suffer from this) it will also stop charging.
5. In general terms, the lower the battery level of the device, the more juice it pulls. This is why you may find you ha email no problems getting a small charge when you start with a battery at 85%, but your phone dies if the battery is 50% or less.
Hope that helps.
Sent from my GT-I9100 using XDA Premium App
OK, I have no idea what the problem is. I have a Brodit active charger (the cig-plug version) for my Galaxy SII. It's not charging my phone AT ALL. There is no sound, nothing displayed on my phone when I connect it. I have the charger led (blue light) on, so I know it's working.
Things I have tried so far:
1. Asked for a replacement from Brodit. Got it, no difference.
2. Tried with a different car (I have a BMW, my wife a brand new Toyota Auris) - doesn't charge it either.
3. Tried a different no-name universal charger - it works perfectly well, the phone is charging as expected. Other things like the GPS device also work fine.
4. Tried a different kernel and ROM on my phone, still no success.
Any suggestions are welcome.
LazyPawn said:
OK, I have no idea what the problem is. I have a Brodit active charger (the cig-plug version) for my Galaxy SII. It's not charging my phone AT ALL. There is no sound, nothing displayed on my phone when I connect it. I have the charger led (blue light) on, so I know it's working.
Things I have tried so far:
1. Asked for a replacement from Brodit. Got it, no difference.
2. Tried with a different car (I have a BMW, my wife a brand new Toyota Auris) - doesn't charge it either.
3. Tried a different no-name universal charger - it works perfectly well, the phone is charging as expected. Other things like the GPS device also work fine.
4. Tried a different kernel and ROM on my phone, still no success.
Any suggestions are welcome.
Click to expand...
Click to collapse
Thats strange, in the first place i thought a faulty micro-usb or charger. But you got it replaced so can't be the problem.
I have a brodit with charger too, but i use it in a different way, meaning i can remove my holder and unplug it without unplugging my charger. ( near my holder i have a small connector that i can unplug).
What i did is cutting the cable from the charger and i did put a male usb port on it ( regular male usb port) and i have a Belkin charger with a usb port, this charger deliver 1A charging current and charge my phone even when i use my navigation. ( with bluetooth and gps on).
Your phones micro-usb seems to be fine too because it charge with other brands of chargers.
Your BMW delivers enough power i guess at your cigarette lighter plug, because it doesn't charge at the Toyota either and both not delivering enough power would be coincidence.
Anyway mine works perfect the way i did it and if i can remember it worked too with my original plug attached too. ( though the original one doesn't provide enough power sometimes to keep it charged while using navigation).
The only thing i can think of is that there is some stress-pressure on your connection between phone and holder connection and that one pin isn't connected properly, with the universal charger you only plug the micro-usb plug in your phone and the micro-usb plug can adjust freely to your phones micro-usb port.
Try to wiggle a bit with your phone when in the holder and see if the power comes on. Or try to connect a little device on your holders micro-usb port ( if you have something small that charge over micro-usb) and see if that works.
Hi everyone,
I have a problem with my original wall charger that came with the phone. There seems to be something wrong between the cable and the connector you are plugging into the phone. I need to have the cable in a specific position for the phone to be able to recharge.
The question is, is there any better charger than the original samsung one? I could probably get it replaced as it still is in warranty, but I don't like how slow it recharges the phone. If I am running a 3D game the phone is slowly DISCHARGING even when plugged in to a wall charger.
I noticed the charger has only 500-700 mA output. I had an older htc charger which had 1000 mA output. Would a charger like this recharge my phone faster? I have seen some posts about non-samsung chargers not being able to recharge the battery fast as there is some kind of protection built into the phone.
I would also consider buying a wireless charger if it was available for a reasonable price.
Are you all using the stock chargers?
Thanks in advance for any help.
you can read this thread: http://forum.xda-developers.com/showthread.php?t=1721677&highlight=charging
Just to make sure it is the charger's fault, does the phone charge normally if connected to a computer, from the USB port?
Thanks for the link.
Yes, phone charges and transfers data from USB without any problem, so it should be fault on the charger.
Reading through that thread, I guess there is no point in buying a more powerful charger.
as i said there, i use a nokia 1200mAh charger and the charging time is more than 2 hours, so we have to deal with it. The thing you should care of is the quality of the charger to avoid the touchscreen known problems
Imho you don`t need better (more powerfull) charger because of the hardware limitations. What you should do is to try any other microUSB charger just to see if that solves your problem. So if any of your friends of family have other samsung or nokia etc. phone, thats charging with microUSB, plug it into your phone to see if it solves your problem. You will know what to do next if it does
al3x_xct said:
as i said there, i use a nokia 1200mAh charger and the charging time is more than 2 hours, so we have to deal with it. The thing you should care of is the quality of the charger to avoid the touchscreen known problems
Click to expand...
Click to collapse
how do I check the quality of the charger?
Hello,
I'm trying to find a car charger that will work right with my One. So far I've tried two different 2-USB port car chargers and both 2.1A chargers and I've gotten an error of "Slow Charging" on my one. I've tried various chargers I had from before when I had an iPhone and they are giving me the same warning. Is there a charger that is known to work well with the One?
Thanks,
Tim
Try using a different USB cable as some of them have different pin configurations. I am using http://www.amazon.com/Anker%C2%AE-Output-Simul-Port-Charger-Built-/dp/B0080AWCTY/ref=sr_1_4?ie=UTF8&qid=1373316550&sr=8-4&keywords=anker+car+charger this Anker car charger and I have never got any messages. Although every charger does charge the One slowly. If you leave the screen on and use the phone (like ingress or navigation) the phone looses charge while charging.
Hi, i'm using this one for myself
Two USB ports and charges pretty fast
Also works at home
http://www.amazon.com/Sprint-Vehicle-Battery-Charger-Travel/dp/B0050FDFQQ/ref=pd_sim_sbs_cps_1
I just went through this as well and have solved it by buying the HTC vehicle charger. You can check your phone charging in the car by going into "Settings" and then to "Power". When the phone is plugged in it will indicate charging either by USB (slow) or AC which is faster.
I have several car chargers including 2.1 amp models and every single one would only go to USB charging mode. Another quick way to tell if you're in USB charge mode is that the screen will turn on when you plug in the charge cable. In AC charge mode the screen stays blank when you plug in.
I picked up the HTC single port USB charger online at Amazon for around $10 bucks. Plugged it in with my existing USB cable and boom, AC mode. Model of the charger I believe is C200 (pn 25531) and it comes with a coiled charger cord as well. They also have a dual port charger which is the C300 but I haven't tested that one.
I also feel a little more comfortable using the HTC charger as I know it's tested and sanctioned by HTC. Not that I haven't used a lot of really good in-car USB chargers by other manufacturers but in this case, the HTC charger is doing the job and was inexpensive. Cheers!
Thanks for the info, I'll check it out. I like having two USB ports, but it's pretty rare I charge both my Blackberry and One at the same time so I'll probably just get the single port. I see it on Amazon for less than $6, whereas the dual port is $25!
linedpaper said:
Thanks for the info, I'll check it out. I like having two USB ports, but it's pretty rare I charge both my Blackberry and One at the same time so I'll probably just get the single port. I see it on Amazon for less than $6, whereas the dual port is $25!
Click to expand...
Click to collapse
I'm using that one and i charge my one and an iphone without any issues
darkriff said:
I'm using that one and i charge my one and an iphone without any issues
Click to expand...
Click to collapse
You're using the two port one? I just didn't want to pay so much extra to have a two port charger when I can get the one port for so cheap. Also, I did just discover that while running ARHD GE I don't get the error, so it seems to only be the Sense related error, but either way I ordered the HTC charger from Amazon, thanks!
joudbren said:
I just went through this as well and have solved it by buying the HTC vehicle charger. You can check your phone charging in the car by going into "Settings" and then to "Power". When the phone is plugged in it will indicate charging either by USB (slow) or AC which is faster.
I have several car chargers including 2.1 amp models and every single one would only go to USB charging mode. Another quick way to tell if you're in USB charge mode is that the screen will turn on when you plug in the charge cable. In AC charge mode the screen stays blank when you plug in.
I picked up the HTC single port USB charger online at Amazon for around $10 bucks. Plugged it in with my existing USB cable and boom, AC mode. Model of the charger I believe is C200 (pn 25531) and it comes with a coiled charger cord as well. They also have a dual port charger which is the C300 but I haven't tested that one.
I also feel a little more comfortable using the HTC charger as I know it's tested and sanctioned by HTC. Not that I haven't used a lot of really good in-car USB chargers by other manufacturers but in this case, the HTC charger is doing the job and was inexpensive. Cheers!
Click to expand...
Click to collapse
The official htc one car charger in the htc website is only one works for me. 24.00but worth it.
Sent from my HTC One
these duel USb chargers from just wireless charge 1A per port in AC mode ... can pick them up at walmart or target
http://www.target.com/p/just-wirele...sku=14365620&gclid=CNq_yZzcrbgCFZBAMgodwnkAvw
I use Avantek. This little guy did an excellent job. With its combination of power ports and USB plugs it works perfectly for everything from iPads to radar detector. Charges my phone as fast as my home charger and always gives full charge to my One when I'm using the navigation app. FYI I found it on Amazon.
I buy from Amazon
Only have had my phone for 3 months but I have only used the HTC charger and cable one time. The charger got extremely hot when I charged my phone, since that first time I have used a samsung galaxy tab charger and samsung galaxy tab 6' usb cable. I have a 2.1 amp dual charger from pepboys in my truck. Phone charges quickly and does not overheat or any of the other issues i've heard of on here. I just chalk it up as samsung having good chargers and usb cables.
See my post regarding fast charging for specifics on the electrical damage in a car and the value of having a good charger:
http://forum.xda-developers.com/showthread.php?p=55802702
Is a fast USB car charger harmful?
On that note. Monoprice.com offers great chargers at a great price. Guaranteed to charge at stock speeds. Great internal parts and quality control at near eBay pricing. I've bought many many of their products over the years and never has it once failed in me.
Alternatively, and unpractically, buy stock chargers.
Sent from my One
The best car charger that I've found is from TechMatte. They have a black one and a white one, and I use the black one. It charges pretty quickly, and was only $8 to purchase, which was not bad at all for a high quality charger.