Seidio Innocase II Surface for Atrix - Review - Atrix 4G Accessories

I've been using Seidio products for quite a few years now on my phones. It started back with the Blackberry Pearl. Since that first experience, I had decided that this was a brand of protection I was going to use on all future phones. Of course, that didnt keep me from trying others as well, just knew it would be the one I would keep.
Most recently I picked up a Motorola Atrix to replace my Nexus One. The whole time I had my Nexus One it was shielded with a Seidio Innocase cover. Unfortunately, when I picked up my Atrix there was no Seidio available, yet. In that time I decided to pick up the Otterbox Defender case. I had never used an Otterbox case before but after receiving the product, I deemed it way too bulky for my daily use and promptly put it back in its packaging.
My favorite parts of Sedio Cases are that Innocase II Surface is designed to protect your phone from scratches and drops while barely adding to the size of your phone. Many users find their sleek design easier to grip than a bare device due to their signature soft touch finish, which enhances the look of the phone and does not attract lint. This is huge for me because I put my phone in my pocket most of the time. This case easily slides in and out of the pocket without sticking or creating more bulk. The Otterbox had a soft rubber outer seal which stuck to the pocket and constantly needed cleaning of lint.
One of the other design features I've become quite fond of is their unique slide-in design which makes putting on and removing your case easy. One piece slides on the top and then the other the bottom and they form a clasp that holds together. This is much easier than the Otterbox which is multiple pieces with an additional piece surrounding all of that. If you ever have to do a battery pull, you know how frustrating it is when you cant get your case off easily. That being said, the Innocase is not simple protection either like a cheapo case you pull off the rack and fit the phone into.
I also liked that I have full access to the screen. I dont use any screen protector and the edges of the Innocase are raised just enough that if I placed the phone face down, the screen wouldn't touch. However, if I chose to put on some type of film, it wouldn't inhibit the use of the case either. Unlike with the Otterbox, it has the film built into the case which would sometimes create blotches where it touched the screen.
When using the case it immediately felt comfortable and while I noticed slightly more material to grip the phone with, I was still able to use all the buttons with ease. The fingerprint reader opening is designed so that the finger easily slides in the same manner as without the case, yet still protects it. The volume buttons were easily manipulated as well and all the ports were very accessible yet clearly protected.
The only downside to this case, and pretty much any other case out there, is that it does need to be removed in order to fit into a dock. I have the standard dock and no matter what angle I tried, the phone with the case on wont fit. Again, this is a situation where having an easily removable(yet sturdy) case is a lot less frustrating than a more difficult one. Especially if you're using the dock every night.
EDIT: As pointed out by another member, the dock DOES work. I had no clue the base of the dock pops out to allow more access to the USB pin via phones with cases. So even with the case on, it WILL work on the bedside(standard) dock.
Overall Im very happy with this case and is the one I've been waiting to come out for the phone. The other nice thing about the Seidio cases is their matching holster. These are just as slim without the bulk. Plus the have the ability to lock the phone into the holster, thereby eliminating accidental removal.
There might be other designs or knockoffs of this product, but there really is only one Innocase.
Please find pictures below comparing the case with the phone, my old Nexus One with a Seidio Innocase II and an Atrix Otterbox Defender case.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

thanks for the review! i've been hoping to see some non-seidio pics of this for a while. do you happen to have any full-case shots of it without any comparison cases? i.e. just the phone and case itself, also the back of the case, etc?

dLo GSR said:
thanks for the review! i've been hoping to see some non-seidio pics of this for a while. do you happen to have any full-case shots of it without any comparison cases? i.e. just the phone and case itself, also the back of the case, etc?
Click to expand...
Click to collapse
The first picture should be of just the phone and the case side by side. Ill post a pic of the back of the case shortly. Are there any other case shots requested?

thanks for hte review, i had the innocase for my captivate and the one thing that really bothered me was how the lip on the edge of the case around around the screen is raised so dirt always got trapped between the screen and under the edge of the case. is this a problem with the atrix?

neotekz said:
thanks for hte review, i had the innocase for my captivate and the one thing that really bothered me was how the lip on the edge of the case around around the screen is raised so dirt always got trapped between the screen and under the edge of the case. is this a problem with the atrix?
Click to expand...
Click to collapse
Ive never had any issues with dirt getting trapped under my Seidio cases. I can tell you that with this Atrix case, its very form fitting and Id be surprised if dirt got under the edge.

This seems an awesome review for the seidio case for the ATRIX... Can someone suggest a nice and (cheaper ) place where I can get this awesome piece of hardware??

HyperM3 said:
Ive never had any issues with dirt getting trapped under my Seidio cases. I can tell you that with this Atrix case, its very form fitting and Id be surprised if dirt got under the edge.
Click to expand...
Click to collapse
I disagree with what you are saying. Dust gets trapped there like any other case that is raised like that. It's not a huge problem for me, but I find myself detaching the case and just wiping quickly when my pockets are too linty. But it isn't a huge problem for me.

If anyone is interested. The black case with bundled holster/clip is shipping now. The colored ones were still showing "Soon". I have it on the way.
I did not see anything on the clip in the OPs review, so when i get it i will followup with pics.

I also had an N1 with the same case. BEST case ever, is correct. I need to know if the Atrix combo will work with the car dock?
Sent from my MB860 using XDA App

I had a Seidio on my Nexus 1 and loved it. This one is just as nice. My only gripe is how tough it is to remove. The N1 case had a little give, this one won't budge. For me the only way to remove it was to slip a plastic shim under the locking tab.

Phutchi said:
If anyone is interested. The black case with bundled holster/clip is shipping now. The colored ones were still showing "Soon". I have it on the way.
I did not see anything on the clip in the OPs review, so when i get it i will followup with pics.
Click to expand...
Click to collapse
Here are pics with the case and the clip.
So far so good. I am very pleased with this case/clip. I have to carry 2 phones and my old holster seemed to just be too bulky.
The phone sits in it securely
Its sturdy, the clip is secured with a brass rivet and not a plastic one so should take a lot of force to break.. The clip swivels so you can have it Vert or Horiz on your belt.
The spring on the top does not seem to have the same tension as the one for my blackberry so I have been nervous about setting it horizontal.

Phutchi said:
Here are pics with the case and the clip.
So far so good. I am very pleased with this case/clip. I have to carry 2 phones and my old holster seemed to just be too bulky.
The phone sits in it securely
Its sturdy, the clip is secured with a brass rivet and not a plastic one so should take a lot of force to break.. The clip swivels so you can have it Vert or Horiz on your belt.
The spring on the top does not seem to have the same tension as the one for my blackberry so I have been nervous about setting it horizontal.
Click to expand...
Click to collapse
heh it looks like your speaker grill has the fignernail indent from thinking it was the power button? you can easily press/smooth it back out next time you have your battery cover off. it bends back just as easily

joeryu said:
heh it looks like your speaker grill has the fignernail indent from thinking it was the power button? you can easily press/smooth it back out next time you have your battery cover off. it bends back just as easily
Click to expand...
Click to collapse
Ya I got that trying to use the phone at 3am. I have a very loud and annoying notification set for an emergency email address that use for work. It went off and i had a hell of a time waking it up

I just ordered this case after spending 3 days with the Otterbox Impact. Otterbox makes excellent cases, but the Impact is just a silicone case that doesn't fit as snug as I wanted.
Hopefully it will be as good as people say when it arrives in a few days.

I just ordered it too - should be here around Wednesday. I'll report back with my findings. Based on your review though, I'm pretty excited about it. I don't normally spring for cases.

It arrived today!
It's sweet. I'm too lazy to post pictures.
It's a super snug fitting case, and it's not obnoxiously branded (ahem, speck cases), and it has a good feel in your hands. It also barely adds on any thickness to the already very thin Atrix.
All in all an excellent investment in my opinion.

i am from Argentina, anyone know if they shipping? as charged? many
thanks!

Hey guys! I just got my case in the mail today and after using it for a full day, I can say that I love it.
The added bulk isn't too noticeable. In fact, I find it easier to grip the phone with the case on. The soft-touch plastic is wonderful, though it does stick a bit when I put it in my pocket.
One nice touch I've found, whether intentional or not, is that the case helps direct sound from the back speaker. I found watching shows on my phone to be noticeable louder.
10/10!

I've been through a few cases since I got my Atrix. This one is BY FAR the best I've used so far.
DK

Related

[Q] Seidio Active X Hybrid Case

Anyone purchase one of these yet? Looks good but company pictures just don't do any real world justice. $19 with free shipping on eBay is a great deal, but i'd rather keep the $19 in my pocket if the case isn't as good as it looks. That being said, with the new Otterbox cases "coming soon," I would rather make sure this is worth it before taking the bait.
Thanks in Advanced,
Rob
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
from the back that looks like the seidio rugged case I had on my nexus. The case in photos looks good but I dont care for the part at the top.
looks really bulky.....
I bought that for my husband and he really likes it. It completely covers the buttons on the sides so that takes a little getting used to but he needed something a bit sturdier and this looks like it should do the trick. We haven't dropped it intentionally though.
polarbee said:
I bought that for my husband and he really likes it. It completely covers the buttons on the sides so that takes a little getting used to but he needed something a bit sturdier and this looks like it should do the trick. We haven't dropped it intentionally though.
Click to expand...
Click to collapse
Questions:
According to the website, there's an option to purchase this case with the Holster combo for $50......there's also an option to get it WITHOUT the holster for only $30. As mentioned earlier, the website/ pictures at seidoonline.com does NOT do justice to its almost unclear as to what items are included.
Q1: Did you buy this with or without the Holster?
Q2: Regardless of Holster or not, does the package ALSO include the actual Innocase II case itself? I would think it would be common sense to include it, but you never know.
Thanks in advance.
Picked up one of these after reading about it in one of the otterbox threads.
Decent price through mygearstore, in addition timed it with a 25% off twitter coupon they posted
It came in pretty quick, seems pretty nice, I only had it on for about an hour, and reboxed it for for a present for the wife to give me. I've been using a cheap silicone case from ebay/amazon. The protected corners seems to be a big advantage and I like the feeling of the finger slots on the edges.
I'll post some images after the holidays if anyone is interested.
dm
dwmoss said:
Picked up one of these after reading about it in one of the otterbox threads.
Decent price through mygearstore, in addition timed it with a 25% off twitter coupon they posted
It came in pretty quick, seems pretty nice, I only had it on for about an hour, and reboxed it for for a present for the wife to give me. I've been using a cheap silicone case from ebay/amazon. The protected corners seems to be a big advantage and I like the feeling of the finger slots on the edges.
I'll post some images after the holidays if anyone is interested.
dm
Click to expand...
Click to collapse
I vote for pics on this! Although, if you can post pics sooner that would be great (to help with decision-making before christmas)
If not, its ok also. "beggars cant be choosers..."
I have a heard a few good feedbacks, but nothing in depth such as a video on youtube for the captivate. It sucks that they don't have the Rugged Combo in Blue. They have it in the Hybrid version such as the image/ pic above my post, but if you look closer, there is a slight difference in the skin as far as a "camera cover" if you want to call it that. The Hybrid (which comes in blue) does NOT have that feature. I'm also interested in seeing if there are covers for the Ports on the top (3mm jack/ usb port) in either Rugged or Hybrid. Its silly i know, but both are the same price for 49.99 at Seidio, without the luxury of having the blue skeleton/ skin for the rugged combo.
I could easily buy both just to satisfy my Blue anxiety, but who would do that?!
not the best images but here you go....
dwmoss said:
not the best images but here you go....
Click to expand...
Click to collapse
Nice.
Questions:
1) does the top of the silicon skin provide covers for the ports (jack / usb)?
2) how lose (if any) is rubber skin?
3) have you tested to see how well it fits inside pockets (jeans/ pants/ etc)?
spartan062984 said:
Nice.
Questions:
1) does the top of the silicon skin provide covers for the ports (jack / usb)?
2) how lose (if any) is rubber skin?
3) have you tested to see how well it fits inside pockets (jeans/ pants/ etc)?
Click to expand...
Click to collapse
1. openings only not a sealable/closed cover - but the usb sliding cover (phones) was easy to open and close with the case on
2. rubber skin is pretty tight it isn't loose at all, I really like the way the plastic X fits over the corners
3. its much slicker then the silicone $4 special case I've been using, part of that is the x plastic but the rubber itself is much smoother.
I won't really have a decent review until I get to use it after x-mas but the hour or so I did have it on it was worth the $18 I had to spend on it.
dm
spartan062984 said:
Questions:
According to the website, there's an option to purchase this case with the Holster combo for $50......there's also an option to get it WITHOUT the holster for only $30. As mentioned earlier, the website/ pictures at seidoonline.com does NOT do justice to its almost unclear as to what items are included.
Q1: Did you buy this with or without the Holster?
Q2: Regardless of Holster or not, does the package ALSO include the actual Innocase II case itself? I would think it would be common sense to include it, but you never know.
Thanks in advance.
Click to expand...
Click to collapse
Sorry for the delay in responding.
I bought it with the holster for him but he doesn't use it much as he stores it in his chest coat pocket most of the time and the clip gets in the way.
The Active X does not include the Innocase II as they are incompatible with each other. The Rugged is the one that fits over the Innocase II. (Basically, the Active X is just a slimmed down version of the Rugged that fits directly on to the phone itself instead of over another case.)
More Pics + Quick Feedback
Got my Active X a few days ago.
I'm a belt clip user, so this was one of few available options. I had a Seidio Innocase for my HTC Fuze that I did not like: the rubbery coating peeled and flaked off, and the clips holding the case on broke within 5 months. They sent me a brand new replacement right away but the same problems repeated. I have the same concerns about the coating on the X-skeleton portion of the Active X but fortunately there are no small plastic parts to break.
Pros:
(1) Not too bulky. I like the feel in my hand. Naked Captivate felt easy to drop even though thinness was quite sexy. Still slips in/out of pocket easily.
(2) Seems like good protection but I have no objective data on this.
(3) Great belt clip: secure, comfortable.
(4) Fit is spot on and I still have a skin on underneath.
(5) Nice blue color.
Cons:
(1) Durability concerns.
(2) Buttons have almost no feedback although they work fine and are actually quite responsive. Takes getting used to.
(3) Rubber gets dusty but its not too hard to brush off.
(4) Spendy
Verdict: Me like.
Photos: I can't make links since I'm a new user on XDA Please go to Flickr and search for "Seidio Active X Hybrid Case for Captivate". My photos should come up at the top. There is a set of 6 pics.
Cheers.
I'm actually looking forward to Christmas to put this bad boy back on.
fonion,
I'd argue about con #4. I was able to get my active x pretty cheap. Not as cheap as a amazon $3 silicone cover but still significantly cheaper then the comparable otterbox commuter case.
dm
http://www.youtube.com/watch?v=QQKurqzPm9I&feature=related
cmeyer3 said:
http://www.youtube.com/watch?v=QQKurqzPm9I&feature=related
Click to expand...
Click to collapse
Very NICE review.....this in addition to Polarbee's feedback = another anxious buyer. lol
Thanks cmeyer
I'd agree with fonion's evaluation. I was given the Active X as a Christmas gift (yes, Christmas already... the first of too many to count. The kids like it though!).
It fits nice on the phone. A little bulkier than your standard run of the mill 2$ silicone cover - which is actually nice for me. I have fairly big hands and the naked Captivate was a little dainty for me - I like the bulk that this case adds.
My one complaint, which fonion also mentioned, is that the case does get dusty. I throw the phone in my pocket and it picks up lint & fuzz, which, because I'm a bit OCD, bothers me more than it should...
All in all, I'm really happy with it (only had it on a couple of days). Really pleased with the quality of the case, and the fit & feel of it.
I have one and really like it. Fits very snug and covers very well. Sure it picks up a little lint, but it will blow right off. Other observations: the hard plastic spider is rubberized too though neither part is particularly grabby. On mine the spider doesn't completely seat in the rubber, bit it's no big deal. I wish the to part of thr face wasn't covered up though. I replaced the body glove hard case with this and am quite happy with it.
Sent from my SAMSUNG-SGH-I897 using XDA App
I'm digging it! My spider fits well. Nice feel to it as well.
dm
I'm really surprised this case doesn't get any love. I've been really please with it over the last 6 weeks or so.
dm
I love mine but I ended up trimming the top portion, my fat fingers couldn't get the drop menu to work.

Ballistic Cases for Atrix!

Came across these by accident. I LOVE THEM! I was looking at the cases available for the Infuse, and found this odd brand by the name of Ballistic making a case for it. I became jealous and Googled them. Google took me to their website which I discovered, OUR PHONE is supported!
Here's the link (they are $35 & $50 for the one on the right): http://www.goballisticcase.com/products/motorola-atrix-ballistic-sg-series-case
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These are great if you have a UHaul to carry your phone around in after you have encased it in this thing!
The second one from the right...
It looks like it would suck to wake the phone up or use the fingerprint sensor.
And taking this on a plane TSA would think it's a bomb
Mgamerz said:
And taking this on a plane TSA would think it's a bomb
Click to expand...
Click to collapse
Wait!............You haven't seen the commercial???.............It's a phone that acts like a laptop............or, it's a laptop that acts like a phone............no way this could be a bomb!
Bomb bomb bomb............bomb bomb ba bomb..............."Doing Atrix the Focker way"!
CaelanT said:
Wait!............You haven't seen the commercial???.............It's a phone that acts like a laptop............or, it's a laptop that acts like a phone............no way this could be a bomb!
Bomb bomb bomb............bomb bomb ba bomb..............."Doing Atrix the Focker way"!
Click to expand...
Click to collapse
Haha!
Sent from a Honeyglowin' Atrix
kimmikolter said:
Came across these by accident. I LOVE THEM! I was looking at the cases available for the Infuse, and found this odd brand by the name of Ballistic making a case for it. I became jealous and Googled them. Google took me to their website which I discovered, OUR PHONE is supported!
Here's the link (they are $35 & $50 for the one on the right): http://www.goballisticcase.com/products/motorola-atrix-ballistic-sg-series-case
Click to expand...
Click to collapse
Just emailed them to let me know when they are available. I have the otterbox defender and while I usually recommend them, the one for the atrix has issues. I'm on my second outer silicone part, and this one doesn't fit right either. The bottom corners bulge away from the inner plastic part, which makes them come off pretty easy.
barry99705 said:
Just emailed them to let me know when they are available. I have the otterbox defender and while I usually recommend them, the one for the atrix has issues. I'm on my second outer silicone part, and this one doesn't fit right either. The bottom corners bulge away from the inner plastic part, which makes them come off pretty easy.
Click to expand...
Click to collapse
x2
The cases happen to be made right here in Fort Lauderdale on the other side of town. I may go get one on Monday. I have the Commuter case which I like, especially since the ports and earphone jack have covers to keep out dust and dirt and the case is easy to get on and off. I dunno if the ballistic has covers and there are no pictures of the front i can find but the design and colors look nice and I am sure the protection is good. Anyone get one yet?
Damn that thing looks thicker then my otterbox defender case. I like the color schemes though. Does it come with a holster? I have to use the holster with my defender case, just to hard putting it in my pocket.
sifon187 said:
Damn that thing looks thicker then my otterbox defender case. I like the color schemes though. Does it come with a holster? I have to use the holster with my defender case, just to hard putting it in my pocket.
Click to expand...
Click to collapse
Yea, the big one comes with one, at least it's in the pictures....
panflute said:
The cases happen to be made right here in Fort Lauderdale on the other side of town. I may go get one on Monday. I have the Commuter case which I like, especially since the ports and earphone jack have covers to keep out dust and dirt and the case is easy to get on and off. I dunno if the ballistic has covers and there are no pictures of the front i can find but the design and colors look nice and I am sure the protection is good. Anyone get one yet?
Click to expand...
Click to collapse
Let us know if you get one. I definitely want one! Black on black is my choice, but the red/black looks pretty cool too.
Awesome!
Got my Ballistic SG
Well I recieved my Ballistic SG in the mail today, got it off ebay for $22 bucks! I haven't bought a lot of cases for my Atrix yet, I tried a Otterbox Impact on launch day and was disappointed with that. This case however feels extremely tough, My brother has the Otterbox Commuter, which i thought was awesome untill this one showed up. It feels very solid, The ports on the side are left exposed, as well as the speaker grill. The space for the fingerprint sensor does feel a slight bit cramped when swiping downwards, I may have to re-enter my prints to get it to read more accurately, but for now it doesn't seem to affect it too much. I've only had it for about 30 minutes but so far i'm impressed. The case doesn't slide around on the phone (though that may be in part to my invisible shield). The rubber/silicone layer does attract dust, but overall I'm happy with my purchase. I attached a few pictures if anyone's interested.
Reaverofdawn said:
Well I recieved my Ballistic SG in the mail today, got it off ebay for $22 bucks! I haven't bought a lot of cases for my Atrix yet, I tried a Otterbox Impact on launch day and was disappointed with that. This case however feels extremely tough, My brother has the Otterbox Commuter, which i thought was awesome untill this one showed up. It feels very solid, The ports on the side are left exposed, as well as the speaker grill. The space for the fingerprint sensor does feel a slight bit cramped when swiping downwards, I may have to re-enter my prints to get it to read more accurately, but for now it doesn't seem to affect it too much. I've only had it for about 30 minutes but so far i'm impressed. The case doesn't slide around on the phone (though that may be in part to my invisible shield). The rubber/silicone layer does attract dust, but overall I'm happy with my purchase. I attached a few pictures if anyone's interested.
Click to expand...
Click to collapse
Not a bad looking case ya got there... is it rubber or plastic or both?
Edit: so the grey is rubber, red is plastic?
Sent from my Motorola Atrix 4G on the network with the most backhaul, whatever that is. This post might have errors as I hate touchscreen keyboards.
Yeah, the black part is rubber, the red is plastic, with a weird layer of black, that feels like slightly rubberized plastic. After using it for a few hours now I'm still satisfied with it. Definitely feels more solid than my brothers commuter case. Now to wait for the HC to be released and try that sucker out.
Dude, that's freaking sweet looking. Can't wait for the HC cases to be released.
Reaverofdawn said:
Yeah, the black part is rubber, the red is plastic, with a weird layer of black, that feels like slightly rubberized plastic. After using it for a few hours now I'm still satisfied with it. Definitely feels more solid than my brothers commuter case. Now to wait for the HC to be released and try that sucker out.
Click to expand...
Click to collapse
Can you please drop your phone from the second or third floor while it's in the case and if nothing happens can you drop it without a case? I just want to check how though is the case before investing in it.
fincan said:
Can you please drop your phone from the second or third floor while it's in the case and if nothing happens can you drop it without a case? I just want to check how though is the case before investing in it.
Click to expand...
Click to collapse
epic !
I like it! May replace my Commuter, even though I couldnt be happier with the OB.
covered ports
I did not buy this case (yet). It looks really similar to the Commuter case as the designs are the same///a soft rubber held on with a hard plastic. However, the ports are not covered on this one. On the commuter both ports are covered in addition to the earphone jack. Someone here reported dust on the inside of the screen and it may have entered thru the earphone jack? On my wish list is a case with a built in stand.

Just bought an OtterBox Commuter case

So I just bought the Otterbox Commuter series case. BTW, its a $30-35 case, I got it off Amazon for $19.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've had it about 2-3 weeks now, and I have to say, I'm liking it. It's also paid off too, I've dropped my phone a few times now, and I was happy I had the case on it.
It's a 2-piece case, the first layer being a rubber/silicone "glove" and the 2nd piece is a tough plastic outer shell that holds to the phone and silicone nicely. It also features flaps that cover the hdmi/charging ports and the headphone jack. The headphone jack cover is nice, it prevents water or pocket lint from getting inside, however I'm a bit iffy on the charging port cover. Its a silicone flap about an inch long that just kinda sticks into itself to remain closed. The problem with this design is that the flap opens when stuffed into your pocket, or getting caught up on the fabric and turning your pocket inside out when removing from your pocket. It's not a BIG deal to normal, regular human beings. But for guys who like to wear their sister's jeans, this might not be the phone-case for you.
Another issue, and again, not really a big deal at all, was with the kickstand. This case allows you to still use the Evo's kickstand. However the added size of the case prevents the phone from being very physically stable while using it. If you have your phone plugged in and charging while watching a movie on it using the kickstand, you would have to fight a little bit with the cord to prevent it from pulling the phone over. Not a big deal.
This case might still fit into most car docks. I have the MountTek cd-player mounted dock/holder, and it still fits in there. Not perfectly, but enough to hold it well. I don't know about any others.
At first, the ACTUAL case felt cheap. But after ACTUALLY having it for a while, I do ACTUALLY like it. I ACTUALLY chose the commuter case because I didn't want the bulkiness of the Defender case, but I wanted something more than the Impact. I find that the Commuter case fits the ACTUAL bill perfectly. It ACTUALLY holds well in my hand, and is ACTUALLY great for being able to just set down on the table, as it protects the ACTUAL protruding camera lens, the ACTUAL rear speaker, and the ACTUAL flash LEDs.
Yeah I've had mine for around 6 months maybe more. I forget. I cut off the bottom port protector. My only gripe is if you change batteries often the silicone inner case stretches.
Looks nice just bought the defender on eBay for 30 bucks the company from what I read fixed the kickstand issue.
jasongthang said:
At first, the ACTUAL case felt cheap. But after ACTUALLY having it for a while, I do ACTUALLY like it. I ACTUALLY chose the commuter case because I didn't want the bulkiness of the Defender case, but I wanted something more than the Impact. I find that the Commuter case fits the ACTUAL bill perfectly. It ACTUALLY holds well in my hand, and is ACTUALLY great for being able to just set down on the table, as it protects the ACTUAL protruding camera lens, the ACTUAL rear speaker, and the ACTUAL flash LEDs.
Click to expand...
Click to collapse
Do you suffer from an affliction that forces you to put the word 'actually' in all caps?
OstrichSak said:
Do you suffer from an affliction that forces you to put the word 'actually' in all caps?
Click to expand...
Click to collapse
Lmao just noticed that think he does.
reaper24 said:
Lmao just noticed that think he does.
Click to expand...
Click to collapse
Lol hoping you guys would notice the joke, making fun of a recent YouTube review that showcased a bunch of "actuallys".
reaper24 said:
Looks nice just bought the defender on eBay for 30 bucks the company from what I read fixed the kickstand issue.
Click to expand...
Click to collapse
Yeah, the defender case has its own kickstand. That would be a nice feature on the commuter case, but oh well.
akrod2as said:
Yeah I've had mine for around 6 months maybe more. I forget. I cut off the bottom port protector. My only gripe is if you change batteries often the silicone inner case stretches.
Click to expand...
Click to collapse
yea mine got ripped off
jasongthang said:
Yeah, the defender case has its own kickstand. That would be a nice feature on the commuter case, but oh well.
Click to expand...
Click to collapse
Ya the Kraken case is like the commuter case with the kickstand . I like it don't like the fact dust can and will get in. Happy to give defender a try. Also I know what you tube vid your talkin about
reaper24 said:
Ya the Kraken case is like the commuter case with the kickstand . I like it don't like the fact dust can and will get in. Happy to give defender a try. Also I know what you tube vid your talkin about
Click to expand...
Click to collapse
Dust doesnt really get onto the phone, but the exposed silicone parts do collect dust and lint. Protects the phone though, I can deal with the rest.
I was going to do a video review of this case being completely stereotypical of the youtube videos out there, I was thinking something along the lines of..
"yo whats up its ya boy jasongthang, aka Jason, here to show you the uh... the uh.. Otterbox Def- uh- I mean Commuter case for the HTC Evo. First off, right off the bat, you can actually see the case is actually two pieces".... yada yada
but i didnt want to take away from the review or step on any toes..
I currently am using the Defender series and I can say I am loving it. I had the Impact one before, which was a waste, but Defender is pretty legit.
"Perfect is almost good enough"
I just got the Defender yesterday, and all in all I can say I'm pleased with it. Some reviewers over at Amazon call it "cumbersome," TBH the Evo is cumbersome to begin with.
I've got this as well.
I cut off the part over the charging port and it's much nicer. My only gripe now is that its pretty difficult to press the power button now.
I bought me and my wife the defender series a couple months ago. They were priced at $28 a piece on Newegg at the time.
They are awesome cases, but I have to say that the kickstand on them is cheaply made. Both of our kickstands broke off withing 3 weeks. But, I hardly use the kickstand anyway so it doesnt really bother me.
yeah i just picked up the defender case on ebay, thing is holding up like a champ, been dropped a few times by accident and it takes all the impact, great cases from Otterbox, had one for almost all my phones
The Commuter case is good for me, I actually snapped the bottom portion where the kickstand is shown, but I contacted Otter Box and they sent me a new one. So far so good with this one.
I bought the Otterbox Commuter some time ago to replace a very, very inexpensive silicone "shell" (it only protected the back of my EVO). Thus far, I've been happy with it, too. The supplied screen protector was crap so I replaced it with one from REALOOK. The silicone shell on my Commuter does attract some lint but said lint rubs off easily with a damp thumb moistened from water from a faucet.
I have yet to drop my EVO at all but the Commuter protects it wonderfully from dust and damage from sliding the device across tables, et cetera.
matthewdavisnelson said:
The supplied screen protector was crap so I replaced it with one from REALOOK.
Click to expand...
Click to collapse
Yeah, good point. The screen protector it comes with is worthless. I tried many times to get it on right and it looked horrible. Right now I'm using PhantomSkinz screen protector. Its nice, but it seems the bottom edge is peeling up due to the edge of the case touching it. I have an extra phantomskinz protector and a Zagg, I'll change it out one of these days.
Just got my defender case today, and I love it. I can deal with the slight bulk it adds, got it off of Amazon for $28. Well worth the money.
Sent from ....
I bought a commuter case in November and broke it. It cracked on the weak part by the kick stand. I called and they sent me a defender at no charge. I just put it oj. Bulky but tough. Well see!
Sent from my PC36100 using XDA Premium App

Cases with Kickstand?

I really like the case mate http://www.case-mate.com/Samsung-Ga...te-Samsung-Galaxy-S3-Pop-with-Stand-Cases.asp but can of the owners give me its reviews?
AND
Any other ones?
The issue is, I am yet to receive 2 of these and afraid that it might not fit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Amazon Aduro Case
Aduro Shell Holster Combo Case, found on amazon.
I have had this case for a week now. I really like the styling and it feels good; however, it is a snap on case and i'm not sure how the top and bottom edges on the phone will hold up in a fall.
Kickstand Case
I'm also looking for a good case with a kickstand for the Samsung Galaxy S3. Wasn't sure if I should start a new topic, so decided to post here first.
I don't use a phone dock, so the size of the case doesn't concern me. Would like full protection. (top and bottom edges covered) Any feedback would be appreciated. Thank you. (Can't post outside links, sorry)
Here are three that I've found. Does anyone know of others?
Case-Mate Pop Case W/ Stand
Concerns: Some of Case-Mates cases bulge out around the edges after a short while. I also wonder about the durability of the kickstand on this case.
Seidio Active with Metal Kickstand
Concerns: Kickstand does not support device in portrait orientation. (Not a deal breaker though). I've never owned a Seidio case, so I personally don't know how quality they are.
TALKonline ProGel SOLID Super Hydro Gel Case W/ Stand
Concerns: Same as the Seidio, I've never owned a case from this company, so I don't know about the quality.
purk said:
I'm also looking for a good case with a kickstand for the Samsung Galaxy S3. Wasn't sure if I should start a new topic, so decided to post here first.
I don't use a phone dock, so the size of the case doesn't concern me. Would like full protection. (top and bottom edges covered) Any feedback would be appreciated. Thank you. (Can't post outside links, sorry)
Here are three that I've found. Does anyone know of others?
Case-Mate Pop Case W/ Stand
Concerns: Some of Case-Mates cases bulge out around the edges after a short while. I also wonder about the durability of the kickstand on this case.
Seidio Active with Metal Kickstand
Concerns: Kickstand does not support device in portrait orientation. (Not a deal breaker though). I've never owned a Seidio case, so I personally don't know how quality they are.
TALKonline ProGel SOLID Super Hydro Gel Case W/ Stand
Concerns: Same as the Seidio, I've never owned a case from this company, so I don't know about the quality.
Click to expand...
Click to collapse
Awesome, came across this link
http://www.squidoo.com/galaxy-s3-cases-with-stand
Sloshykarma said:
Aduro Shell Holster Combo Case, found on amazon.
I have had this case for a week now. I really like the styling and it feels good; however, it is a snap on case and i'm not sure how the top and bottom edges on the phone will hold up in a fall.
Click to expand...
Click to collapse
I've got this one as well and love it.
Sent from my SAMSUNG-SGH-I747 using xda premium
I have a Case-Mate Pop.
Pros:
1. Fits great.
2. Rubber side grips are great.
3. Push buttons work with zero problems.
4. The case totally surrounds the phone (except for the ports).
5. Rubber extends above the glass, so you can place the phone face down.
Cons:
1. The kickstand only works with the phone in a horizontal position. It does not work when the phone is vertical.
2. When placed on a table face up, the plastic part of the cover rests on the table. So, the plastic gets scratched over time.
3. Not a huge deal, but I wish it had covers for the power and earphone ports to keep them clean.
I got a TPU/plastic one off ebay for $7.50 and am liking it. I posted it about it at the other thread... http://forum.xda-developers.com/showpost.php?p=28547621&postcount=17
I've been using the dry-application screen protector that came with it and so far so good. It doesnt cover the whole front, since the screen edges are slightly curved, but it works. I also was in a hurry so just put the screen protector plastic that came with the phone on the back before stuffing it into the case just to protect from wear marks, etc. It has a side-effect benefit of covering the camera lens w/o seeming to affect image quality.
purk said:
I'm also looking for a good case with a kickstand for the Samsung Galaxy S3. Wasn't sure if I should start a new topic, so decided to post here first.
I don't use a phone dock, so the size of the case doesn't concern me. Would like full protection. (top and bottom edges covered) Any feedback would be appreciated. Thank you. (Can't post outside links, sorry)
Here are three that I've found. Does anyone know of others?
Case-Mate Pop Case W/ Stand
Concerns: Some of Case-Mates cases bulge out around the edges after a short while. I also wonder about the durability of the kickstand on this case.
Seidio Active with Metal Kickstand
Concerns: Kickstand does not support device in portrait orientation. (Not a deal breaker though). I've never owned a Seidio case, so I personally don't know how quality they are.
TALKonline ProGel SOLID Super Hydro Gel Case W/ Stand
Concerns: Same as the Seidio, I've never owned a case from this company, so I don't know about the quality.
Click to expand...
Click to collapse
Seidio makes some of the best cases on the market. No doubt about it. I don't know about their kickstands but their cases are top notch.
Thanks for the feedback. I found a few other kickstand cases, but I still haven't made a decision. Dont really like any of them.
I have the case mate so far it's good, but I only been using it for two days. Ill keep posted.
Sent from my SAMSUNG-SGH-I747 using xda premium
I have a Case-Mate Pop and a Seidio Active. The Active's kickstand is heavier duty and the CM's kickstand is flimsy, but it is functional. However, I would not necessarily say that the Active is a better cover than the Case-Mate. I like the Case-Mate more than the Active, but I use the Active because I need to hang my phone on my belt. I preordered a Trident Kraken.
Has one tried this case http://www.ebay.com/itm/Black-Hard-...140748?pt=PDA_Accessories&hash=item19d524cb4c before?
May2012 said:
I found a awesome one at http://www.ebay.com/itm/Fosmon-Sams...106772?pt=PDA_Accessories&hash=item43b1d18394
just for US $6.95
Click to expand...
Click to collapse
I bought this case and I kept it on for about 30 seconds. It really made the phone feel cheap.
Currently not being productive on my S3.
If youre just looking for the kickstand feature, I'd recommend getting FlyGrip, a tad bit pricey though.
angie4u said:
I recently purchased Aduro Shell Holster Combo with Kick-Stand from amazon because my husband thought it'd be nice to have a holster... but anyway... im a bit disappointed in general. First of all, the packaging... maybe cuz im picky but i didnt like that it came in a plastic baggie. The kickstand seems cheap and easily breakable. One thing I like is it's pretty grippy cuz of the material. Don't think it'll provide much protection from drops though. We read some good reviews on amazon, which is why we purchased but... it's mediocre at best imo. But my husband likes the back, me not so much. Here are some pictures:
]
Click to expand...
Click to collapse
I just received the same case although it was branded as a "JKase" and was 5 bucks cheaper than the Aduro branded one. It's actually pretty good and the holster also seems okay. I'm not sure of the sturdiness or longevity of this case and holster but so far so good.

[Review] Seidio Surface case

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.ebay.com/itm/Seidio-Sams...ccessories&hash=item564b61dbc4#ht_3764wt_1396
Packaging:
Nothing special, plastic box shipped inside a plastic bagvelope (bag/envelope) The box it comes in is much easier to open from the bottom than the top, learn from my mistake. No fancy packaging here, the case slides around inside the box a bit. Nothing inside the box but the case...no screen protector, no cleaning cloth, no fancy color brochure showing other products the company makes, nothing. In my opinion, $30 is a steep price to pay for a case so to see the case flopping around in it's box and no extras at all included with the case was kind of a let down.
Fit and finish:
When I first grabbed the case out of the box my very first thought was "oh boy, feels kinda slippery." I got the Garnet Red version, planned on getting the limited edition Gloss White when it becomes available...more on that later. The case is lined with a black felt material on the inside part of the back wall to protect the battery cover from getting scratched during installation/removal, might even add a little shock protection as well. Sliding the case on to the phone one thing I noticed is that the front edges do infact put a little pressure on the sides of the face of the phone, this is notable because those of you who have a wet application screen protector or other full face protection like the Moshi iVisor or any one of the curved full face protectors may have a little problem getting this care to play nicely with it. I think a wet application would be fine so long as it's fully cured before you go putting this case on and as long as you are careful when installing it...making sure it's not pulling up the protector as you go. The case slides on and locks in place to itself thanks to a little tab built in on it's inner wall on the back. Getting it off can be tricky, especially if you have an aftermarket, non-stock battery cover on like I found out. I highly advise not using the case with anything other than the stock battery cover. I had my white carbon fiber cover on which seemingly added no extra bulk but apparently the tiny little bit it did add made it next to impossible to remove the case. I ended up using brute strength to get it apart and luckily avoided causing any damage to it or it's locking mechanism. Putting the stock battery cover on made things much easier. Helpful hint, when trying to remove it, press down on the raised part in the back when squeezing the top part of the case on the sides.
With the case installed I noticed that the fit was so snug that there was no daylight at all between the face of the phone and the edge of the case, a good thing. The cutouts are all spot on but the bottom mic opening wasn't quite centered. There are no overlays over the buttons so they are easily accessible and engaged. Those openings are beveled/tapered to allow unobstructed access to the buttons...no need to tactically attempt to press the buttons, you just press them as you would normally as the case does not get in the way. The color I chose, Garnet Red, has a metallic sheen to it and is very easy on the eyes however it lacks grip. Holding the phone, it's not as bulky as I thought it would be, but it's not as easy to hold on to either. The finish is very slippery so make sure you have a firm grip on it. This is the first case I've had on this phone that requires you to stick your pinky out while you're holding the phone to ensure it doesn't slide down. Very disappointed. The design of the case does provide a front side lip, allowing you to set the phone face down with no worry of causing damage to the screen.
Final thought:
While the case looks nice, fits like a glove and allows easy access to all ports and buttons, it is very slippery to hold and can be a problem depending on what type of screen protector you're using. The locking mechanism is a nice touch but be aware if using an aftermarket, non-stock battery cover as it can make the case nearly impossible to remove. Am I going to order the limited edition Gloss White when it comes out? It'll surely have better grip but i'm not that in love with this case to say for sure.
I have the Seidio surface in blue and I do not find the case to be slippery it has a lot more grip than the stock battery door. The finish is a soft touch finish that does not show fingerprints.
Here are some photos and I have a full review up to.
from my AOKP galaxy s3
Grip is not a strong point of this case by any stretch of the imagination. It's coming off as soon as my TPU bumper arrives. The finish on this case is pretty much identical to that on the Incipio Silicrylic Dual Pro, the difference being the silicone sleeve which gives you the good grip. I like everything about this case except for the lack of grip and how it limits what screen protectors you can use with it.
via Galaxy S III
Gadgetz said:
Grip is not a strong point of this case by any stretch of the imagination. It's coming off as soon as my TPU bumper arrives. The finish on this case is pretty much identical to that on the Incipio Silicrylic Dual Pro, the difference being the silicone sleeve which gives you the good grip. I like everything about this case except for the lack of grip and how it limits what screen protectors you can use with it.
via Galaxy S III
Click to expand...
Click to collapse
You've amassed quite the S3 case collection. Post a pic of it later.
zmore said:
You've amassed quite the S3 case collection. Post a pic of it later.
Click to expand...
Click to collapse
Just trying to find "the one". The SGP Neo Hybrid is on my radar. Not really sure there's any others I really want to try out right now.
I have the platinum series which is pretty much this case with the holster. I have had it for my past three phones but am on the by bubble with this one. I have to agree that this case is more slippery then I remember my past cases to be. Because of that (and the fact that I dropped my OG Evo with his case on and the Efren shattered ) I am looking for another case. Thinking of getting an otterbox. Need something with good screen protection and a holster.
Does nfc work?
elosogrande7076 said:
I have the platinum series which is pretty much this case with the holster. I have had it for my past three phones but am on the bubble with this one. I have to agree that this case is more slippery then I remember my past cases to be. Because of that (and the fact that I dropped my OG Evo with his case on and the Efren shattered ) I am looking for another case. Thinking of getting an otterbox. Need something with good screen protection and a holster.
Click to expand...
Click to collapse
I was pretty disappointed with how slippery this thing is but i'm leaving it on until my TPU bumper and igadgitz clear tpu case show up...only other case I could see myself buying after this is the SGP Neo Hybrid.
GNja said:
Does nfc work?
Click to expand...
Click to collapse
Yes sir
Alright guys, today was my first day out in the wild with this case and I have discovered something......moist hands = good grip with this case! Normally my hands are dry, no sweaty palms for me....but its pretty warm out today and I wear nitrile gloves alot during the day which cause my hands to sweat badly. So after removing my gloves and patting them dry I picked up my phone to take a few pics and I noticed it wasnt sliding in my hand. Figuring it was the moist hand I was holding it with I turned on the AC to dry my hand completely and sure enough, the slipperyness was back.
So those of you with sweaty palms, this is your case!
via Galaxy S III

Categories

Resources