Related
How to get S =off and superuser permissions
Make sure you are on 2.2.1 software and fastboot is turned off, usb debugging is turned on and phone not connected to computer via usb cable... before u attempt this.
First make sure you have visionary(downlod link) and terminal emulator(market) installed.
http://android.modaco.com/content/software/320350/19-nov-r14-visionary-one-click-root/
Place the visionary download file into sdcard and install the apk using astro file manager.
Root.rar (all files plus a script to make things a little easier. )
http://www.mediafire.com/?flit79p2y069bb3
md5sum: 46361b0cc8652d88688c0ab66d44950b
1. Download the root.rar file and unzip it to /sdcard on your device.(it should be a folder after unzip.[place the whole folder called root directly into sdcard])
2. Run VISIONary to gain temp root. Open visionary and check "set system r/w after root" then click on "temproot"..screen will go blank..thats normal.
Now open terminal and run some commands.
Terminal Emulator Method
3a. Start terminal emulator up on your device.(I prefer this method b/c you can see the output.)
a. type "su" + enter to gain root privileges.
b. Type "cd /sdcard/root" + enter.
c. Type "sh root.sh" + enter.
d. Follow the on screen prompts.
Turn off your phone and hold vol down and power. on the top u will see s =off.
select "fastboot" then shutdown or powerdown. Power you phone back on.
Open terminal and typr "su"..it will say permission denied. Thats normal
Now open visionary again. Make sure "set system r/w after root" checked then click on "temproot"..screen will go blank.. thats normal. Now click on "Attempt Permroot now" phone is reboot and you are all set
Go back into terminal and type "su" and it will say user permissions granted.
or
Thanks to Mackster248 for makeing a youtube video on how to root. Disclaimer [This video tutorial uses visionary r11 and my guide uses visionary r14]
http://www.youtube.com/watch?v=eHrtVzlsA_s
If any one is having problem with "su" permission denied, Try using visionary r11.
download link for: visionary r11 http://forum.xda-developers.com/showpost.php?p=9278164&postcount=899
-----------------------------------------------------------------------------
Flash a Custom ROM----Make sure fastboot is off and usb debugging is on.
1. Before we flash anything lets flash clockwork so that you are able to get into recovery. From the market download Rom manager(free). Open rom manager and click on "flash clockworkmod recovery". Wait few min. Rom manager will download and flash clockwork. Turn your phone off and Hold vol down and power. In the hboot menu select recovery and then the phone will restart. You will get a phone with yellow triangle error. Thats normal. Don't panic. Take the battery out for couple on min. Turn the phone back on. Open Rom manager again. Now click on "flash clockworkmod recovery". It will flash the recovery second time. We are doing this to make the clockworkmod stick. Now turn the phone off and see if you can get into recovery again. It should work.
2. Make sure you are permrooted and S =off. Also make sure you are able to get into recovery before you start flashing stuff. Download rom from XDA developers and save it to your computer.
3. Once it is saved, plug in your phone via USB cable and mount the SD card so we can save files to the sd card.
4. Copy the ROM’s .zip file over to the root of the sd card (NOT in any folders on the sd card, just on the root of the card) (do NOT extract it, leave it as a .zip).
5. In the custom recovery screen, select Nandroid then Backup and backup your current ROM.
6. Then select Wipe Data and wipe caches.
7. Then select Apply ".zip from sd card" and choose the ROM you downloaded earlier.
8. Once it is done flashing, click reboot system. Once it reboots, you are all set. Enjoy!
or
Thanks to Mackster248 for makeing a youtube video on how to flash rom.
http://www.youtube.com/watch?v=ah_vsW44lss
I am not responsable for damage to your device from flashing. Do this at your own risk.
Credit for these steps: http://theunlockr.com/2010/11/15/how...ryhboot-s-off/
Credit for these steps:http://forum.xda-developers.com/showthread.php?t=834225
Hey devs let me know if something need to be corrected in the steps.
Looks pretty good and Thank You. Only thing I noticed is the detailed steps for Rom Manager and clockwork are missing.
bobsbbq said:
Looks pretty good and Thank You. Only thing I noticed is the detailed steps for Rom Manager and clockwork are missing.
Click to expand...
Click to collapse
Sure I will it in the guide in couple of days.
Nothing missing that I can see, looks pretty good.
My MyGlacier 4G MINE!!!
Well I thought since he is going to the extent on detailing all the steps he might as well talk about the ROM Manager and recovery. Someone will say how do I get in to custom recovery if it is not mentioned that it is needed. If you are going the detail route then this should be included IMHO. I think this will help many new users.
I meant as far as the s off and rom flashing. I agree with you though that cw needs to be outlined a little better I just didn't mention it b/c he said he was going to add it later.
My MyGlacier 4G MINE!!!
Added the Rom manager and clockwork recovery steps under "flashing new rom". Plz can someone make sure this thread stay on first page bec i have see if no one responds the old threads move to second page.
Thank you very much this is my first android phone and when I followed the other root guide I didn't press perm root in visionary (last step), and a mod should sticky this so that it stays on the first page
moustafaraslan said:
Thank you very much this is my first android phone and when I followed the other root guide I didn't press perm root in visionary (last step), and a mod should sticky this so that it stays on the first page
Click to expand...
Click to collapse
I am glad I can help.
I also just flashed a rom using this tutorial and I can tell you it's pretty noob friendly. I mean I have flashed softwares on other phones but never on an android, once again great guide.
i followed this method and when it rebooted after the "perm root" my phone keeps getting this error: The process android.process.acore has stopped unexpectedly. Please try again.
I can't really use my phone at this point.. any suggestions?
thanks.
Is there a way to force the 2.2.1 update if on the stock 2.2? I've tried all methods so fat and can't seem to get it to update....there is no ruu file around?
Sent From HTC G2
Videos!
I actually just made how to videos on these two topics!
http://www.youtube.com/watch?v=eHrtVzlsA_s
http://www.youtube.com/watch?v=ah_vsW44lss
I hope it helps some of the newcomers!
To the OP: Maybe if the vids are good enough you can put the links in the first post?
I'm still on 2.2 tho I'd love to get my my4g like yours ugh lol is there a way to force the 2.2.1 update? Or should i just wait :-(
Sent From HTC G2
poulosjr said:
I'm still on 2.2 tho I'd love to get my my4g like yours ugh lol is there a way to force the 2.2.1 update? Or should i just wait :-(
Sent From HTC G2
Click to expand...
Click to collapse
Just wait, how long have you had the phone? On my first mt4g it took over a day to get my OTA update, but on my second one it only took an hour till I got mine. I've seen some people not get it till almost a week later.
peez206 said:
i followed this method and when it rebooted after the "perm root" my phone keeps getting this error: The process android.process.acore has stopped unexpectedly. Please try again.
I can't really use my phone at this point.. any suggestions?
thanks.
Click to expand...
Click to collapse
Either Nandroid back or perform fix permissions via rom manager application.
i was never able to install the rom manager after it rebooted.. i only have maybe less than a second to do anything until the next force close pops back up.
Ive had it 3 days my g2 got the update like within 45min lol
peez206 said:
i was never able to install the rom manager after it rebooted.. i only have maybe less than a second to do anything until the next force close pops back up.
Click to expand...
Click to collapse
Not really sure what went wrong. Did u make sure u were on 2.2.1 before you preformed the root method. I have tried these methods and never failed yet.
mackster248 said:
I actually just made how to videos on these two topics!
http://www.youtube.com/watch?v=eHrtVzlsA_s
http://www.youtube.com/watch?v=ah_vsW44lss
I hope it helps some of the newcomers!
To the OP: Maybe if the vids are good enough you can put the links in the first post?
Click to expand...
Click to collapse
Hey Mackster248 the videos look good. The only thing is the root video by u uses visionary r11 and so visionary r14 has more options than last version so some people might get confused. what u say?
Alright kids I'll try to make this a simple as possible those of you that are scratching your heads and wondering why you cant get S-on to say OFF..... on the newer MT4G with bootloader 0.86.0000 HERE WE GO.
Step 1:
Download Androzip,Terminal Emulator,Root Explorer and Superuser
Download - Visionary11(yes its an old build, but its simple and less confusing for you noobs.)
Once you have these apps put them on you MT4G homescreen page(doesnt matter in what order just as long as these apps are quickly accessible to you.)
Step 2:
Make sure you go into Settings on your MT4G.
now that you have selected Settings select Applications Make sure that Unknown sources has been selected
On the same Settings screen you will also see Fast boot Make aure to deselect it!
Once the Fast boot has been deselected, select the Development you be transfered to another screen the only items that should be selected is USB debugging. Once you have finished this go back to you home screen.
Step 3:
At this point you should be at the home screen with all the apps you downloaded in Step 1.
Now Select Visionary, once Visionary is open select Set system r/w after root.
Now press Root Now!. let Visionary temproot your MT4G(CAN TAKE UP TO 10-30 SECONDS BE PATIENT!)
Ok that part is Done. go back to your home screen.
Step 4:
Select Terminal and type - su you should see "Terminal Emulator has been granted superuser permission", it will be a real quick pop up saying this. Ok you are now temp rooted. go ahead and select the hardkey arrow and press it until you get to the home screen.
Step 5:
With theMT4G's internet browser find the gfree file on the TRUE PermaRoot and the ULTIMATE S=Off!!! forum
Open the gfree file with Androzip, that you download onto your MT4G NOT with what your computers
unzips this file with!
Step 6:
Once you have Unziped the gfree file from your phone into your phone, you will need to locate and transfer everything that is in the gfree folder DO NOT TRANSFER THE FOLDER ITSELF WITH THE CONTENTS IN IT. Just open the gfree folder and transfer everything inside there. Time to locate where Androzip placed the gfree file
Open Root Explorer scroll down until you see the sdcard file, ok open it!
Scroll down until you see the AndroZip file open it! WALA.... I present to you the extracted gfree scripts. Now that your looking at them, I need you to select the Menu Hardkey Button which is next to your home Hardkey Button. Once you've pressed the Menu hardkey it will options will pop up on your MT4G screen, select Multi-select now select everything inside of the gfree folder.( youll notice the green checks when selecting ) you will also see another option of commands, select move
Now with move selected, navigate those files with the arrow hardkey on your MT4G to /data/local and paste them in that location. Done with that process! close your Root Explorer and return to your home screen.
Step 7:
Open Terminal Emulator and type the following:
type "su", and hit enter
type "cd /data/local" and hit enter.
type "chmod 777 gfree" and hit enter to make the program executable.
type "./gfree -f" and hit enter.
Wait for the program to finish and then reboot into HBoot you'll see that S=Off. Also, check your bootloader version. If it says s=off and has bootloader version 0.86.0000 it worked!
You will need to run visionary11 again (w/set system r/w after root checked and then press Root Now!) to make root privileges permanent and then reboot again. Now "su" should work properly for you.
This will work 100 percent if you read these instruction very carefully and follow these steps exactly!
Thats the same instructions from the gfree thread.
How is this different?
if this is the same then why the hell are people not getting it?! im seeing a lot of people regarding that the newer MT4G with bootloader .86 is extremely hard or damn near impossibly to S-off if this doesnt explain how to do it in lamens term then these people are true NOOBS and should stick with their STORM 2 stick with the basics and not with the FAKE Sh**t!. just trying to help
mine had bootloader 86 and it rooted just fine. People just need to follow the directions better.
easeback said:
if this is the same then why the hell are people not getting it?! im seeing a lot of people regarding that the newer MT4G with bootloader .86 is extremely hard or damn near impossibly to S-off if this doesnt explain how to do it in lamens term then these people are true NOOBS and should stick with their STORM 2 stick with the basics and not with the FAKE Sh**t!. just trying to help
Click to expand...
Click to collapse
My phone has 86. Bootloader and it took me bout 15 min using gfree method still has 86. Bootloader i didnt do eng but root was easy as pie
Sent from my HTC Glacier using XDA Premium App
He took out the the extra talk and just put it very simple it shouldn't take no more the 5 min to do
easeback said:
if this is the same then why the hell are people not getting it?! im seeing a lot of people regarding that the newer MT4G with bootloader .86 is extremely hard or damn near impossibly to S-off if this doesnt explain how to do it in lamens term then these people are true NOOBS and should stick with their STORM 2 stick with the basics and not with the FAKE Sh**t!. just trying to help
Click to expand...
Click to collapse
this thread is beyond unnecessary.
i told those guys over n over they were doing it wrong lol. my phone came with .86 also and never had any issues.
Hes just trying to help but, it doesnt matter how many people post this, some of them still don't know how to follow instructions. Thanks for helping the noobs.
Sent from my HTC Glacier using XDA Premium App
Call me naive, but where do I obtain version 0.86.0000? My phone has 0.85.2007.
TeeJay3800 said:
Call me naive, but where do I obtain version 0.86.0000? My phone has 0.85.2007.
Click to expand...
Click to collapse
Version 0.86.0000 is what ur phone comes with u have yhe eng
Sent from my HTC Glacier using XDA Premium App
elry567 said:
Version 0.86.0000 is what ur phone comes with u have yhe eng
Click to expand...
Click to collapse
I have the engineering bootloader? I don't know how that's possible since I never changed it. I just rooted and installed CWM.
TeeJay3800 said:
Call me naive, but where do I obtain version 0.86.0000? My phone has 0.85.2007.
Click to expand...
Click to collapse
You have the eng bootloader. Your better off with it.
Yes, ALL the MT4Gs (at least all the ones I've seen) come with the 0.86.0000 bootloader. There shouldn't be any reason for this preventing you from rooting. The 0.85.2007 is the engineering bootloader. You get this either by manually flashing it (as per the instructions in grankin's true permroot thread) or if you used the root.sh script (such as those of us who followed theunlockr.com's walkthrough).
If you aren't succeeding with the gfree method, either you aren't following instructions properly or something else is interfering. My friend couldn't get VISIONary to temproot, but after uninstalling one of his file explorer apps, all of a sudden VISIONary worked.
Same here. Got mine the 11th of this month and rooted first try no problem.
option94 said:
mine had bootloader 86 and it rooted just fine. People just need to follow the directions better.
Click to expand...
Click to collapse
Sent from my HTC Glacier using Tapatalk
jdkoren said:
You get this either by manually flashing it (as per the instructions in grankin's true permroot thread) or if you used the root.sh script (such as those of us who followed theunlockr.com's walkthrough).
Click to expand...
Click to collapse
The method I used did include running the root.sh script, so that must be how I got the engineering bootloader. Thanks for the info.
TeeJay3800 said:
The method I used did include running the root.sh script, so that must be how I got the engineering bootloader. Thanks for the info.
Click to expand...
Click to collapse
That is correct... The root.sh includes the engineering bootloader within it and it is the better of the 2. I suggest installing it and you will not have any more problems.
SWEET! Thanks! I missed the other 50 threads with these directions!
Just a tip for people having problems rooting using the gfree method. Follow the instructions to the "T" and it works. As for the commands for terminal emulator...copy and paste them to a word document so you can be sure where there are spaces, and make sure that your 0's are not O's and so forth...Don't be afraid to ask for help, there are alot of nice people on this forum that will help you out.
thnx
thanks alot for this, idk why people on xda don't know how to speak in laymans terms, i guess it's to drive the noobies away, i've been around here since cyanogen had 3.0 on the G1, and i shyed away from using the gfree method on my buddies phone since it looked complicated (didn't want to do alot of reading and work) and i was just wanting to do it fast.
this thread simplified things for me so i can know what i'm doing, also i didn't want to download root explorere (dont' wanna pay $4) so i just pushed every file manualy using adb.
"adb push c:/blah data/local"
aalsmadi1 said:
thanks alot for this, idk why people on xda don't know how to speak in laymans terms, i guess it's to drive the noobies away, i've been around here since cyanogen had 3.0 on the G1, and i shyed away from using the gfree method on my buddies phone since it looked complicated (didn't want to do alot of reading and work) and i was just wanting to do it fast.
this thread simplified things for me so i can know what i'm doing, also i didn't want to download root explorere (dont' wanna pay $4) so i just pushed every file manualy using adb.
"adb push c:/blah data/local"
Click to expand...
Click to collapse
ES Filer explorer does what root explorer does as well, but it's free.
Ive been through alsorts of the posts all the guides i can find, even ones that say they are for unrooted phones and all of them fail.
Does anyone know if there is acutaly any way that works to get the USB functions to work again?
all the guides ive found need to copy the files to the phone, which cant be done on a none rooted phone because you cant enable SU to move the files.
There must be some way of fixing this.
Tools i have
a windows PC
a linux Laptop
a working rooted desire
and a USB bricked none rooted desire
Have you read this?
To use this tutorial you should already have some skills, anyway, here's my translation:
1. Turn on your Desire holding Back+Power buttons, you will enter Fastboot (drivers should be installed).
2. Download fastboot.zip from here , unzip and execute sdcard_repair.cmd from fastboot folder.
3. Press reboot on your device and wait for it to be fully loaded.
4. In Android Market search for Android Terminal and install it.
5. Search for z4root (it doesn't support Desire but it will give you temporary root (until you reboot your device)).
6. Go to here , read it carefully, download files, necessarily edit the CID in mtd0.img,
put in SDCARD root folder (using cardreader or via internet, cos it's USB Brick )
7. Launch z4root, choose temporary root, close it.
8. Launch Android Terminal, write in it su, agree with root rights and now follow the usual UnBrick process. (for ex. this (use translator)).
9. Reboot.
well im getting somewhere now, usb functions are working again, sadly not getting anywhere with http://unrevoked.com/ just isnt seeing my phone, thanks for at least getting usb up again; )
* okay seems the unrevoked problem is my Hboot, currently downgrading it, fingers crossed
Hello xda, in accordance with the signup video I have scoured the earth looking for an answer. However I'm not sure how much necro posting is frowned upon here so I thought it would be safer to just start a new thread.
I have an HTC Desire HD from Telus(for use on the Rogers network). I am in the process of rooting it but have encountered a problem. I can gain temporary root on the terminal emulator(Because the $ turns to #) however when attempting to run clockwork flash clockworkmod recovery I get the error "An error occurred while attempting to run privileged commands!"
I get the same error when attempting the "Fix Permissions" so I'm currently at a loss of what to do.
I have the ninja superuser icon in the apps menu however when I open it the screen is blank. I am unsure if this is how it is supposed to be or not. I have seen several references to a permission box that pops up during some of the steps but I haven't seen that at all.
I've tried four separate methods, the last of which coming from this thread http://forum.xda-developers.com/showthread.php?t=954997
I am currently at step B.d which involves running the S-OFF tool and Easy Radio OFF tool. But still clockwork will not flash a backup, and when I restart the phone I can not get super user to work on the terminal (ie by typing su) and must use the rage method to regain temporary root.
Also, I don't know if this is related or not, but when I restart the phone and attempt to boot in recovery mode, the volume buttons don't allow me to select other options, and instead the phone just forces me to reboot normally.
Some more facts:
model HTC Desire HD A9191
Build # 1.32.405.6
Android 2.2
Anymore info I'm probably forgetting just ask away!
So my question is: Can anyone identify what the issue is?
Thanks much for taking the time to read my question.
Does visionary not work for you?
I've seen that alot of success has been gained by doing temp root and perm root through it?
It does sound like the rage method might not be working for you from what I can tell..
I do want to check all the steps you followed before where fine?
Sent from outer space on my DHD running beatmod gingersense v1.3
Visionary was how I rooted mine. Worth a try if you havent tried it: http://android.modaco.com/content/software/320350/19-nov-r14-visionary-one-click-root/
Thanks for the visionary suggestion, but Visionary still isn't working :/
Has visionary been tested with the Telus Desire? I heard there was a difference. What happens when I attempt to temproot is it moves to a blank screen then goes back to the menu.
When I used visionary on 1.32 it did not always work first try ... generally always worked after 2 runs. then used it to perm root
It works. You do not have Telus software in your phone anymore.
Sent from my Desire HD using Tapatalk
Try my method (I made it because the methods I found for my Telus desire HD were flaky at best and only got temproots from it.)
Since you already flashed to 1.32 start at step 2
If you want to go gingerbread, dl the 2.36.405 ruu and use that and your pc to put 2.3.3 on it (dont worry, it works fine, i was using it since it came out and built a rom based off that, kingdom, and pyramid roms for my own sense 3 rom) and use the gingerbreak method.
http://driphter.com/index.php?topic=3867.0
Still haven't managed to get root. JSLEnterprises my antivirus won't let me download your file :/
I'm at a loss for what to do.
lemonpartyz said:
Still haven't managed to get root. JSLEnterprises my antivirus won't let me download your file :/
I'm at a loss for what to do.
Click to expand...
Click to collapse
Disable your Antivirus (Avast say's its malicious), Norton or F-Prot says its clean.
and Internet Explorer 9 says its not trustworthy (because there's .bat files in the zip), Firefox says its fine.
There is no malicious code in the zip, you can edit each individual batch file in the Resource folder to see the code. Its very simple and basic.
I disabled my antivirus, but when I run Install Visionary nothing happens. The CMD window opens and says it has been succesfuly installed but nothing has been installed, and nothing appeared in the app menu.
Edit: I went into the resource folder and then followed the steps from there and everything worked, except I still don't have the # symbol in terminal (even when entering "su") and ROM manager still gives me the same error.
lemonpartyz said:
I disabled my antivirus, but when I run Install Visionary nothing happens. The CMD window opens and says it has been succesfuly installed but nothing has been installed, and nothing appeared in the app menu.
Click to expand...
Click to collapse
go into the resource folder, edit the visionary install batch in notepad, delete the "cls" line, save and exit
rerun it with the phone attached. See if it truly installed successfully.
lemonpartyz said:
I disabled my antivirus, but when I run Install Visionary nothing happens. The CMD window opens and says it has been succesfuly installed but nothing has been installed, and nothing appeared in the app menu.
Edit: I went into the resource folder and then followed the steps from there and everything worked, except I still don't have the # symbol in terminal (even when entering "su") and ROM manager still gives me the same error.
Click to expand...
Click to collapse
you dont need to use the termial in my method.
Once visionary is installed, and you run it, and everything is done exactly whats described in my 9 easy steps thread (along with outcomes along the way), then you should be perm rooted, with s-off and eng-off with supercid.
I managed to install visionary with your method, however when running Eng-S I encountered the error "Bootloader corrupt, DO NOT REBOOT! Seek help from XDA!"
Help?
Edit: Followed the advice here http://forum.xda-developers.com/showthread.php?p=14936635 and s-off worked properly this time. Hopefully my DHD won't brick on reboot. Could super user be the problem? it never asks me for permissions or anything, all I have is an icon and a blank screen when i open the app.
Edit2: Rom manager took three attempts to install correctly. Still the same result "An error occurred while attempting to run privileged commands!"
FML
lemonpartyz said:
I managed to install visionary with your method, however when running Eng-S I encountered the error "Bootloader corrupt, DO NOT REBOOT! Seek help from XDA!"
Help?
Edit: Followed the advice here http://forum.xda-developers.com/showthread.php?p=14936635 and s-off worked properly this time. Hopefully my DHD won't brick on reboot. Could super user be the problem? it never asks me for permissions or anything, all I have is an icon and a blank screen when i open the app.
Edit2: Rom manager took three attempts to install correctly. Still the same result "An error occurred while attempting to run privileged commands!"
FML
Click to expand...
Click to collapse
looks like the superuser application isnt running properly.
I would use the 1.32 ruu (not the pd98img.zip off the sd) and then from a fresh install (without resoring any data other than google account to visit the market)
run through the visionary, s-off tool, eng-off tool, and then reboot again, then install rom manager from the market, run it, it should ask you for permission and may hang for a second, and then say you have about 5 seconds to allow root permissions.
Then install rom's away. if you're not into making seperate rom specific app folders on your sd card, google JSL Er3BuS. its a sense 3 rom without the extra scripts.
How do I install the 1.32 RUU if I can't install it from the SD card?
Thanks!
lemonpartyz said:
How do I install the 1.32 RUU if I can't install it from the SD card?
Thanks!
Click to expand...
Click to collapse
It is very easy mate,
1. Download the RUU of your choice from http://shipped-roms.com/index.php?category=android&model=Ace
2. Put your phone in charge mode only with USB debug on.
3. Make sure you have HTC Sync installed on your PC, and close HTC Sync application from your system bar in windows (make sure that HTC Sync is not running as all you need is the driver)
4. Right click on the RUU file and select "Run as Administrator"
5. Connect your DHD by the USB cable to your PC.
6. Click some boxed and "next"s.
7. Waiting!
8. Profit!
I tried following the steps here http://forum.xda-developers.com/showthread.php?t=841890
But got the error "ERROR [120]: Low MAIN BATTERY POWER. When the battery is above 30%.
This is getting ridiculous lol
I'm sorry I'm such a bother.
naailalzuhir said:
It is very easy mate,
1. Download the RUU of your choice from http://shipped-roms.com/index.php?category=android&model=Ace
2. Put your phone in charge mode only with USB debug on.
3. Make sure you have HTC Sync installed on your PC, and close HTC Sync application from your system bar in windows (make sure that HTC Sync is not running as all you need is the driver)
4. Right click on the RUU file and select "Run as Administrator"
5. Connect your DHD by the USB cable to your PC.
6. Click some boxed and "next"s.
7. Waiting!
8. Profit!
Click to expand...
Click to collapse
Tried this, now the update process has taken 45 minutes.
Well, it took 5 hours to finish, but finish it finally did. Rom manager installed no problem, flashed no problem and I am in the process of installing cryogen. Thanks everyone for their help and kind words.
Fingers crossed cryogen works.
I'm going away for the weekend, but when I come back I'll update this thread with the full details of what went down so hopefully someone will be helped by my many many hours spent raging.
-Lemonpartyz
lemonpartyz said:
Well, it took 5 hours to finish, but finish it finally did. Rom manager installed no problem, flashed no problem and I am in the process of installing cryogen. Thanks everyone for their help.
Click to expand...
Click to collapse
Glad its sorted for you , and hoping it status that way...enjoy your custom roms setting your phone free
Look forward to your post letting us know how its going.
Sent from outer space on my DHD running beatmod gingersense v1.3
[Tut]How To Systemless Root+Root+More!
This was fully tested on SM-G928A;Baseband:UCU2AOJ1 on 5.1.1
Just in case needed //SM-G928A\\ **Full Odin Restore G928AATT2AOJ1**
$<Download Mode & Odin Systemless Root Flash>
Requirements:
1.A Windows Computer
2.Your Phone Device SM-G92-0/5/8A
3.Odin 3.10.7
4.Kernel_Root_Android_5.1.1_AT&T_SamFirm.NET
5.USB Drivers(Most of the time if connect the phone to the computer using the usb cord that comes with the device it will install all of the drivers if your computer is connected to the internet.
____________________
Okay now assuming that everything has been required, we can begin.
Turn off your phone and open Odin with admin rights on the computer & connect your phone to the computer using the usb cable that comes with the phone.
On the phone now hold all of these following buttons down, Volume Down+Home Key+Power Soon after once you see the blue screen release those buttons and press the Volume Up key to enter Downloading Mode.
Now in Odin on the computer, it should have recognized your device now press the "AP" button and open up for example, "G928A_Kernel_Root_5.1.1_SamFirm.NET.tar.MD5" now just press start and sit back and relax and soon you will have Systemless Root!(Note your phone will reboot which is normal after the flash.
--------------------
#<Obtaining Root Access>
Requirements:
1.A Windows Computer
2.Your Phone Device SM-G92-0/5/8A
3.USB Drivers(Most of the time if connect the phone to the computer using the usb cord that comes with the device it will install all of the drivers if your computer is connected to the internet.
4.Flashed The Systemless Root
5.Kingo Root
6.Root Checker Cost $FREE
7.SuperSU Cost $FREE
8.BusyBox Cost $FREE
9.Developer Options (USB Debug)
____________________
Okay now assuming that everything has been required, we can begin.
Go into Settings>System>About Device & Enable Developer Options.(Keep tapping the "Build Number" category until it says Developer options have been enabled.
Connect your device with your usb that which comes with the phone on the computer. Open "Kingo ROOT" on your computer with admin rights, and once the program asks you to turn USB Debug on, go on your phone into Settings>System>Developer options and make sure it is enabled as well as usb debugging. Wait for kingo root to find your device and once found, it will ask you to either "Reroot,Root, or Remove Root, click "Reroot" then wait for it to start.(After it starts you should see on your phone the kingo root usb app pop-up and show the same thing you see on your computer)
After it is done it should confirm you have been rooted and will ask to donate.
Now you may exit out of the program on the computer and the phone and once out of the app and back on your phone, you will want to look in your app drawer for the kingo root "Superuser" and uninstall this. Then head on over to the playstore if haven't all ready and install "SuperSU" & "Busybox" if want to. Once have the SuperSU app open it and install the su binary updates with the "Normal" option not the recovery one since we don't have that.... & once done just press OK DO NOT REBOOT or you will bootloop and will have to use Odin to reflash your system of your phone to get it back working out of the box "state"
UPDATE Have a pc around and can still boot with root:
Yamaha169 said:
You can restart the device while rooted... but you have to have ADB to do so...
When you reboot ... you will get stuck at the ATT logo... at this point... plug your phone in to your pc...
Open up ADB (COMMAND WINDOW)
type in
ADB devices
until your device # appears in adb... (this can take a minute for your pc to find your phone) so don't panic
This means the phone is found...
From this point... type
ADB ROOT
ADB SHELL
YOU will now be inside the shell of the device with root permissions
Now type
setenforce 0
(MAKE SURE LOWERCASE just like seen. "setenforce 0" if do Setenforce 0 it won't be found.....)
This will set selinux to permissive ... allowing the phone to boot...
Someone with enough experience could probably create a selinux permissive stock kernel ... but I've contacted several developers with no response ...
Click to expand...
Click to collapse
Now open up the root checker app & click verify to see if you truly do have root.(You must grant root access so allow once it pops up.) Enjoy your root but never ever reboot.
UPDATE: How to Root If Possibly not allowing you to root!!!
Step one you will need to of downloaded "Android Studio
Step two you will now need to install all of the updates(Well that's what I did) inside the studio program.
Step three now locate 'program tools" which for me was located here: C:\Users\NameofComputer\AppData\Local\Android\android-sdk\platform-tools
Step four make a cmd.exe file to go in the platform-tools simply just clicking on the "start button" on windows and searching "cmd" then dragging the cmd file to the folder.(Rename it to something like ADB Root or something different than just cmd)
Step FIVE download the su binary which can be located HERE and place it in the "platform-tools" folder.
Step SIX now almost there. Open the cmd file(ADB Root.exe) and once opened, plug the phone into the computer with the cable that came with your phone.
Step Seven:^.^ now with the phone plugged in and the program start, type this command to make sure your device is found:
Code:
adb devices
and if found you will see your attached devices and if more than one or can't see your device, you can do
Code:
adb kill-server
command and it will restart adb.
Step Eight: MAGIC time lol now that your phone is connected and you can see it is indeed listed, type these commands as followed:
Code:
adb root
adb remount
adb push su /system/bin/su
adb shell
chown 0:0 /system/bin/su
chmod 6755 /system/bin/su
You don't really have to do the other commands after pushing su it's just for pre-caution.
Step Nine: Now do the following at the top and try to use the Kingo root once more and click root or reroot.
If this doesn't work try to press unroot and restart phone then try this again.
Also like down below I talk about if you did reboot before you unrooted, you can still unroot but sometimes it's tricky and it needs you to do the adb remount before will work so just remember that...
--------------------
$#$<UnRooting & Keeping Systemless Root So You Can Reboot & Reroot>
Requirements:
1.Your Phone Device SM-G92-0/5/8A
2.Root Access(Superuser rights)
3.SuperSU Cost $FREE
4.Root Checker Cost $FREE
____________________
This is very simple and easy to do, all you must do after every root and before every reboot is to go into "SuperSU" and go into the settings and scroll down until you see "Fully Unroot" and click that and once done verify with the root checker that you are indeed unrooted but still have adb shell and once done that you may freely reboot with no bootloop and then if want root once more just use "Kingo Root" on the computer to reroot once more.(I'm hoping someone will come out with an app that does the same thing and works so we don't need the computer anymore which would make it much easier..)
Edit/Update:
I found that if you maybe forgot to unroot before a reboot that you can still unroot without the need of going into odin and reflashing stock system just by connecting your phone to the computer via the usb that which comes with your phone and opening up Kingo Root and waiting for it to find your phone then click unroot and wait for it after you have unrooted and you will hear a sound which means it's fixed! So just force shutdown the device with pressing both: Volume Down+Home Button+Power then it will boot back up as normal!
-------------------- ____________________ -------------------- ____________________
~My Findings Through Long Research & Errors~:
<How to Fix Wifi Bug That Comes With Flashing Systemless Root>
Requirements:
1.Your Phone Device SM-G92-0/5/8A
2.Root Access(Superuser rights)
3.SuperSU Cost $FREE
4.BuildProp Editor Cost $FREE
____________________
On your phone open up the "BuildProp Editor".
click on the search button and search for "ro.securestorage.support=true" now once found change the =true to =false and save. Now you must reboot for it to take place but remember to UNROOT before you reboot.
Now doing this your wifi will stay connected and you no longer have to enter your password millions of times so it will be nicer to keep systemless root.
--------------------
<How to Enable AT&T Hotspot System FULLYApp>
Requirements:
1.Your Phone Device SM-G92-0/5/8A
2.Root Access(Superuser rights & .SuperSU Cost $FREE)
3.Root Explorer Cost $3.99
4.NEW Modded TetheringProvision .apk Cost $FREE(Also can be found in this thread in attachments.
5.ADB Root cmd knowledge or Download SQLite Editor Cost $2.99
6.BuildProp Editor Cost $FREE
____________________
Okay my fellow members that stayed on 5.1.1 with me, this tut did once work but then at&t blocked me and it stopped working but now rejoice becase there is a bypass once more!!!
NEW WAY:
I'm not sure which worked so I'm gonna just tell you everything that I did...
1.I first rooted obviously
2.I found a new TetheringProvision.apk which I have uploaded down in the attachment and at the top.
3.I used adb root for this but this can also be done with sqlite editior so I'll explain both ways, first way will be the easy way the adb root...>>>
Step 1: Ensure you have the correct OEM drivers installed for your handset on the computer
Step 2: Download and install the necessary ADB drivers (v1.4.2)
Step 3: Enable USB debugging on your Android handset:
Go to Settings > About Device, and tap the build number 7 times or until you see 'You're now a developer' message.
Return to Settings > Developer options and use the toggle button to turn on USB debugging. Then tap OK button to accept the warning and continue.
Step 4:Connect your device to PC with original USB cable.
Step 5: Launch a command window on your Windows PC.
Step 6: Access ADB shell and run the following command:
adb shell now just type " settings put global tether_dun_required 0 " and enter.
________----------Now the sqlite way
Step 1:Go into sqlite editor and allow root rights...
Step 2: Locate "Settings Storage" and click on "Settings.db then click on "global"
Step 3:Locate tether_dun_required 0 and if not there add by clicking on the +
then fill out name as " tether_dun_required " >>And value as " 0 " and then save file and unroot then reboot.
Now then after all of that I downloaded the build.prop which I know you don't have to but it makes it easier for me to do so and probably for you too...
Step 1:Get build.prop editor from the playstore and open it to grant root rights.
Step 2:Click on the pencil icon on the top right where the search icon is.
Step 3: Scroll all the way down to an open line.(If not one make one.)
and put this in the line....>>> " net.tethering.noprovisioning=true " and then click the save button at the top right and then save it and unroot then reboot.
Then replacing the Tetherprovision.apk . >>>
Step 1: Download the NEW modded TetherProvision.apk at top or at bottom.
Step 2: get a root explorer and go to System/App/TetheringProvision
Step 3: Rename the actual TetheringProvision.apk to TetheringProvision.apk.bak
Step 4: in the same location, go into "arm64" and rename the TetheringProvision.odex to TetheringProvision.odex.bak
Step 5: Now locate the modded TetheringProvision.apk you've just downloaded and place it in System/App/TetheringProvision/ now should be two TetheringProvision, the TetheringProvision.apk.bak and the modded one, TetheringProvision.apk.
Step 6: change the property promissions of the tetheringprovision.apk to give it root rights by changing the promissions to look just like the actual one which is " rw-r--r-- "
Step 7: save and unroot then reboot!
Now youre wifi tether and usb should work!!! enjoy!
--------------------
<How to disable OTA & Security Notification>
Requirements:
1.Your Phone Device SM-G92-0/5/8A
2.Root Access(Superuser rights & .SuperSU Cost $FREE)
3.Titanium Backup & Titanium Backup Pro License Cost $Free | $5.99
____________________
Open up titanium back with pro license and freeze these following apps:
1.SecurityLogAgent(This is that annoying notification that which comes with the systemless flash root that keeps annoying you to reboot and undo what you done.)
AT&T Software Update(This will make it so AT&T won't push any updates to your device anymore so no need to worry about installing an update ota and losing your root or something else like bootlooping.
And again, all of this sticks after you unroot and reboot!
___________________________________________
<How to Get Youtube RED (Sort of) FREE!>
Requirements:
1.Your Phone Device SM-G92-0/5/8A
2.OGYoutube Cost $Free
Basically all you do here is download the modded sort of youtube app(OGYoutube) and install it then done! You now can download videos/music on the app and have access to run audio in the background plus NO ADS!!! (if there are I haven't seen any yet...)
Best part of this too since can't be used fttb, no need for XPOSED apk!
_____________________________
<How To Install Viper4android>
Requirements:
1.Your Phone Device SM-G92-0/5/8A
2.Root Access(Superuser rights & .SuperSU Cost $FREE)
3.Fast Reboot
4.Soft Reboot
5.Viper4Android V2.3.4.0
6.Audio_Effect.Config
7.Titanium Backup & Titanium Backup Pro License Cost $Free | $5.99
8.IRS Impulse Response Sample files
9.Root Explorer Cost $3.99
~~~~~~~~~~~~~
To Read the tuts yourself than rather follow my tut, you may do so by following This Link & This Link
~~~~~~~~~~~~~~~~~~
Alright, I decided to do my own detail tut to make it much easier so follow me and you'll have viper4android in no time : )
So let's get begin, download if not already, the busybox,SuperSU,TitaniumBackup,Fast reboot,Soft Reboot, & Root explorer. Now having all that done open up Busybox and allow it root rights and you may wait for it to research for a smart intall, or just press install. Once you installed it in the default location System/xbin, click on the will be installed to location and choose System/bin and install it there too.(Not sure why but that's what the tut called for.)
Now let's download the folders for viper4android, go ahead and download Audio_Effect.Config.zip file,IRS Impulse Response Sample files, & the Viper4Android V2.3.4.0 folder.
Now open up the root explorer and unzip all that which is zipped up.(Which is all of the files;Audio_Effect.Config.zip file,IRS Impulse Response Sample files.zip, & the Viper4Android V2.3.4.0 folder.zip
)
Now once all are extracted, we will begin putting what is needed where.
Let's start off with the ViPER4Android_FX_A4.x (The actual name of the folder) you're gonna want to long press it and copy this folder. Once done, you're gonna want to paste this folder in System>Priv-app and make sure to change the permission of the .apk to 0644 rw-r--r-- & the FOLDER to 0755 rwxr-xr-x(The folder should have the same permissions as the other folders in that location.) which is inside the folder to give it root access which is 0644;rw-r--r-- and if not sure what root permission should look like, refer to this link Or Google what it looks like, then save/press ok.
Now go back to where you extracted your folders, and this time copy the "audio_effects.conf and go to System>etc and find and rename the actual audio_effects.conf to audio_effects.conf.bak and then paste the copied modded audio_effects.conf here & DONT FORGET change the permissions to give it root rights.
Now after all is done, open the app "Titanium Backup Pro" and look for and freeze these following applications: 1.Adapt Sound 4.0 & SoundAlive 3.0 now open the app "Soft Reboot (Root) and click yes you want to do a soft reboot. Then once back up(If want you can click the "Fast reboot app" to quickly refresh the system) and running you should see the viper app inside your app drawer. Open it and install the update/software when ask you to and once done it should ask for you to reboot just click on ok and then go out and back to the "Soft Reboot (Root) then do another soft reboot.
Now almost DONE!!! Once back up and running again, go to your root explorer again where you extracted the folders and grab the folder of "ViPER4Android and move it to your device storage ex; Storage/emulated/0 (It's where the download folder is and dcim folder is.. Then finally, go toSettings>Device>Sounds and notifications>Sound quality and effects and toggle on all of the listings[NOTE YOU MUST PUT EARPHONES IN FOR THESE TOGGLES TO SHOW]; UHQ Upscaler|SoundAlive+|Tube Amp Pro now you're done enjoy viper4android via editing the settings in the app.
Edit
You need to download SELinux Mode Changer and give root rights and just click on permissive mode and all done. Also might need to use compatible mode in the Viper4Android settings.
I found that this mod works with Pandora and Youtube app but not with google music or the default music app and not sure how to fix that....
__________________________________0
This is some more quick finds which you don't need a tut for just information I'd like to share so you all know.
I found out that you can use Titanium Backup Pro Cost $5.99 and freeze anything you want such as bloatware and that annoying notification that appears every time you reboot if have systemless root installed "SecurityLogAgent" and as long as you UNROOT before you reboot, it is safe and everything you froze stays frozen.
Now I haven't tried uninstalling any system apps so I wouldn't advise doing that unless you wanted to but I don't see the point except to free space up since you can just freeze anything and does the same thing except for freeing space....
I haven't been able to unlock the bootloader in my research and errors which probably never gonna happen anytime soon....
I also never found an app that could root the device yet without a computer....
And yeah that's it! I just was so happy to find out all of this and just had to share it with xda members which are on the same boat as me that has been wanting some "freedom" which now can have a piece of it. : )
If found these tuts to be helpful, feel free to hit thanks button and if want donate.
AngelRyu said:
Just gonna get right to it and be fast.
Odin Flash Kernel for systemless root.
obtain root
Download SuperSU
After rooted download some sort of buildprop editor and search for " ro.securestorage.support=true" Now change =true to =false. and save!
Now go into the superSU app and fully unroot then reboot and also keep adb shell root!
So you fix the wifi bug plus keep the adb shell so you can obtain root once more! Now we just need some app that can give root access with 1 click without needing a pc and this would work for me until we can actually reboot with root without it bootlooping anyways.... I still can't find a wifi tether app or a method that works for the at&t hotspot app though...
Click to expand...
Click to collapse
Question for clarification.
So current method for rooting g928a is this systemless root.
Question 1, will it brick my phone with this root if i reboot, because i read somewhere on here that the phone will just keep on rebooting.
You mention using superSU app to unroot to reboot. So basically I have to unroot with superSU whenever I want to reboot then reflash again to get root?
fuzmik said:
Question for clarification.
So current method for rooting g928a is this systemless root.
Question 1, will it brick my phone with this root if i reboot, because i read somewhere on here that the phone will just keep on rebooting.
You mention using superSU app to unroot to reboot. So basically I have to unroot with superSU whenever I want to reboot then reflash again to get root?
Click to expand...
Click to collapse
Yes you must unroot to remove the su binary so the system acts like nothing has happen. I use kingo root for windows and it works every time with root all you need to do is hit "root" or it may say "reroot" and works every time. I have been playing with this a lot trying to do things to get it to reboot with root but have failed so far.... I wish someone with more experience would approach this so we could have an app to use at least so we not have to use pc every time to reroot until we get the ability to keep root and reboot.
Kingo root can be found here : https://www.kingoapp.com/android-root.htm
and this works after flashing the kernel from odin. This was the only way I actually found to be able to get root was with this because manually pushing su just didn't work for me....
Thanks for being much clearer on the instructions and idoit proof. I was worried about the bootloop and I thought there was no exit strategy on this expensive phone until you mention reflash. With your extensive tinkering on this, did your knox security trip up?
If this is the only possible way, maybe the community could make some sort of app that if we have to shutdown or reboot the phone specifically for g928a, it will safely unroot it for us.
TASKER?!
Anyone know if this still works after taking the latest OTA a few days ago?
The problem is this isn't root. I restart my phone several times a day. There is no point especially if I can't get a custom OS. However, thanks for making the instructions clear. And for anyone who doesn't understand systemless root, it's temp root. When you reboot dmverity sees the false file structure and tries to rewrite and reverse the changes, effectively removing root. On the Note 5 AT&T for temp root you didn't have to unroot before reboot as it wouldn't boot loop, it would just remove root and let you continue on. So something in this version must be getting farther in breaking past dmverity if it's causing the OS to bootloop.
tonys.94 said:
The problem is this isn't root. I restart my phone several times a day. There is no point especially if I can't get a custom OS. However, thanks for making the instructions clear. And for anyone who doesn't understand systemless root, it's temp root. When you reboot dmverity sees the false file structure and tries to rewrite and reverse the changes, effectively removing root. On the Note 5 AT&T for temp root you didn't have to unroot before reboot as it wouldn't boot loop, it would just remove root and let you continue on. So something in this version must be getting farther in breaking past dmverity if it's causing the OS to bootloop.
Click to expand...
Click to collapse
I was wondering if maybe we could place SU somewhere else so we might could trick it to reboot with root but haven't done it yet and or maybe keep SU on the sdcard/storage and use the terminal on the phone to push su to xbin every reboot but just hoping maybe can get root working without making the stupid thing bootloop.... Like I said I been doing a lot of dumb stuff with my phone because I have been so disappointed in this phone with not having wifi tether at the most really but now that got that I'm much happier but I'm still on the research of keeping root and being able to reboot.
I won't be updating until something maybe for sure comes along with 6.0 I can wait because my galaxy s4 I had stayed on stock version forever because was able to do everything so was no need to update really.... Anyways yeah lol maybe someone greater or maybe my playing around will work. WE can only hope...
Oh yeah, to the other guy NO it did not trip knox doing any of the things I've done. which I wouldn't care if could unlock the bootloader lol...
Edit:
I've done all I can think of and didn't work to keep root on a reboot except it did keep root without bootloop with a soft reboot...
I found out to maybe later will add tut up top but for now I'd like to tell you or whoever, if you do bootloop due to not being able to access the su unroot in time, you can still connect your device with Kingo Root in that bootloop and can unroot to save you from having to reflash every time... Might have to reboot as soon as you hear the found from the unroot though.
Oh and on a factory reset everything sticks excepts what was frozen becomes unfrozen just fyi...
Yeah, that's all I can find so I'm done with it hope someone can help later on but I'm just happy with wifi tether so much : )
So what all can we do with this root
Thank you for your hard work. it's very much appreciated!!!
Will pay part of my bounty which is 50 dollars pay day!!
But, please reply. what all can we do with this root!?
O0Gjulian said:
So what all can we do with this root
Thank you for your hard work. it's very much appreciated!!!
Will pay part of my bounty which is 50 dollars pay day!!
But, please reply. what all can we do with this root!?
Click to expand...
Click to collapse
Hi, I didn't come up with anything but the fix for wifi bug and hotspot app.
I just made a very detail tut to help others, but thanks.
I would wait on the bounty to be paid to someone who can make it possible to keep root on and still be able to reboot.
So in theory with this method I can root, install a modified tetheringprovisions, unroot (as hotspot is the only feature I actually desire), and go about my business without worrying about bootlooping or knox being tripped? Feels too good to be true, but I want to believe.
Just a reminder that Android 6.0.1 is right around the corner. If you don't fully go back to stock before the upgrade it will not flash and could possibly wipe the data partition. Both the system and boot images need to be 100% stock.
antizombie said:
So in theory with this method I can root, install a modified tetheringprovisions, unroot (as hotspot is the only feature I actually desire), and go about my business without worrying about bootlooping or knox being tripped? Feels too good to be true, but I want to believe.
Click to expand...
Click to collapse
It's true, that's how my phone is rolling with frozen apps and the modded hotspot without root, but still the systemless root remains in the system but doesn't do anything with out a computer or applying the kingo root to true root it.
I haven't tested the adaway yet so idk if will work or not.... and I been wanting xpose to work to disable youtube ads but haven't tried that either. . I might root tonight and try out adway tho.
But yeah to your question you are 100% safe and will not change anything or trip anything; phone can reboot all it wants with no bootloops with the modded tether is what I'm trying to say lol .. .
Edit:
Yeah adaway works after unroot and reboot. . . But I decided not to use it because a lot of people us adfly and it wouldn't let me access the link so yeah.....
On another note I froze a lot of stuff and done a lot of things not sure which part caused it but it doesn't bother me because I don't use samsung pay but in the end I had to freeze samsung framework for samsung pay because it kept saying force closed but which again Idc about that app so no biggy to me : )
Was Samsung Pay crashing before you started freezing apps? I have yet to use Pay but I'd prefer to keep my options open if possible.
antizombie said:
Was Samsung Pay crashing before you started freezing apps? I have yet to use Pay but I'd prefer to keep my options open if possible.
Click to expand...
Click to collapse
Honestly, I'm not sure but it had to be either the freezing at&t update or securityagent because it seemed to happen after that... Or could be the hotspot mod but I didn't get any crashes until i froze those 2 apps so idk...
Package Disabler in play store freezes apps so what's the point?
Can you fully remove with TiBu and be safe unrooted?
---------- Post added at 03:55 PM ---------- Previous post was at 03:40 PM ----------
navalynt said:
Just a reminder that Android 6.0.1 is right around the corner. If you don't fully go back to stock before the upgrade it will not flash and could possibly wipe the data partition. Both the system and boot images need to be 100% stock.
Click to expand...
Click to collapse
Yeah and from what I've seen of the nightmares people have been having with their Note 5's on Marshmallow, I'm staying FAR away from it!
I can confirm this works. Sorta a pain to have to reroot but hey, It's progress. We may never have a custom ROM option or recovery, But this is the next big thing. If we can find a app that'll just reroot us. it's perfect. (somewhat) Just rooted a few minutes ago. Going to play around. More than likely I'll re flash stock and make a youtube video for anyone needing questions or wanting to see it be done.
And I lied.. So, My experience was weird. Lagging constantly and weird download issues with a fresh wipe.
I'm sadly gonna have to unroot and hope that a better method would come out.
):
O0Gjulian said:
I can confirm this works. Sorta a pain to have to reroot but hey, It's progress. We may never have a custom ROM option or recovery, But this is the next big thing. If we can find a app that'll just reroot us. it's perfect. (somewhat) Just rooted a few minutes ago. Going to play around. More than likely I'll re flash stock and make a youtube video for anyone needing questions or wanting to see it be done.
And I lied.. So, My experience was weird. Lagging constantly and weird download issues with a fresh wipe.
I'm sadly gonna have to unroot and hope that a better method would come out.
):
Click to expand...
Click to collapse
I'm not sure why you would experience "lag" because I have no lag what so ever. Maybe try going to settings>system>developer options and change both transition animation scale and window animation scale to 0.5x
I've reflashed stock many of times due to to trying to find everything there is to find and I've had no "lag" but also you could download the soft reboot and fast reboot from market. Fast reboot frees up memory via closing and restarting certain apps, and soft reboot kills zygote and does a "hot reboot" without going through whole start up process .
Please reply I'm gonna try and help you : )
Also @
joe3681 said:
Package Disabler in play store freezes apps so what's the point?
Can you fully remove with TiBu and be safe unrooted?
---------- Post added at 03:55 PM ---------- Previous post was at 03:40 PM ----------
Yeah and from what I've seen of the nightmares people have been having with their Note 5's on Marshmallow, I'm staying FAR away from it!
Click to expand...
Click to collapse
I can confirm freezing anything won't harm the system on a reboot after unrooting but not sure about removing the apps would be safe. I have however remove the youtube app and reinstalled it in play store and it didn't harm anything.
AngelRyu said:
I'm not sure why you would experience "lag" because I have no lag what so ever. Maybe try going to settings>system>developer options and change both transition animation scale and window animation scale to 0.5x
I've reflashed stock many of times due to to trying to find everything there is to find and I've had no "lag" but also you could download the soft reboot and fast reboot from market. Fast reboot frees up memory via closing and restarting certain apps, and soft reboot kills zygote and does a "hot reboot" without going through whole start up process .
Please reply I'm gonna try and help you : )
Thanks for helping me! I went ahead and flashed stock and followed your steps!
Working great now!
NOW, My next question... What difference would it make if I used package disabler pro VS TBU?
Wouldn't both of these apps freeze the processes? Or would it make a difference with root and SU access?
Click to expand...
Click to collapse
O0Gjulian said:
AngelRyu said:
I'm not sure why you would experience "lag" because I have no lag what so ever. Maybe try going to settings>system>developer options and change both transition animation scale and window animation scale to 0.5x
I've reflashed stock many of times due to to trying to find everything there is to find and I've had no "lag" but also you could download the soft reboot and fast reboot from market. Fast reboot frees up memory via closing and restarting certain apps, and soft reboot kills zygote and does a "hot reboot" without going through whole start up process .
Please reply I'm gonna try and help you : )
Thanks for helping me! I went ahead and flashed stock and followed your steps!
Working great now!
NOW, My next question... What difference would it make if I used package disabler pro VS TBU?
Wouldn't both of these apps freeze the processes? Or would it make a difference with root and SU access?
Click to expand...
Click to collapse
I'm not sure because I've never heard of that program, but I did buy it just now for about $1.89 and the activation keeps failing so I can't test it to see the difference but with titanium you can do everything not just freeze stuff but back up apps and their data and much more.
Titanium backup has been around for ages which is why I recommend it.
Click to expand...
Click to collapse
I use package Disabler. Works like TiBu without root. Only reason to root would be to fully remove apps but would it boot okay after?