[7.July.2011][ROM][GSM][2.3.3] ◄► Overcome ROM v3.0.0-ICARUS ◄► Kernel v3.2.0 ◄►
DISCLAIMER: You know the drill, I am not responsible if loading this rom makes your Tab melt, explode, disintegrate, or cause harm to anyone near it. (I am fairly certain none of that will happen though )
Change log in second post.
ROM FEATURES
BGJP4 Base Rom - ANDROID 2.3.3
Overcome kernel v3.2.0 included
No Modem is included - due to a variety of personal preference I decided to leave that a la carte
Fully Deodexed
Fully Zipaligned
Rooted with busybox installed
Reboot/Recovery/Download options added to the power menu
Accurate battery mod with gingerbread styling
Blur removed across system (i.e. behind power option menu) - significantly improves performance
Power Off confirmation disabled
Screen off animation enabled
Overscroll Glow effect enabled
Added AppWidgetPicker
CSC set to XEU
Ads Blocked
Updated Market to 2.3.6
Updated Maps to 5.7.0
Flash Player removed due to compatibility issue - install from market and you'll be all set.
Updated GMail to 2.3.4
Updated YouTube to 2.1.6
Updated SamsungApps to 2.5.039
Updated StreetView to 1.6.0.6
Updated Thinkfree Office Suite
Removed Startup/Shutdown sounds
Cool boot animation
A2DP Bluetooth Connection Fix Integrated
SIP calling enabled over 3g AND WiFi
Fugutweaks integrated
Browser mods (enabled "Default Zoom" in settings, added "User Agent" in settings, set plugins to "on demand" by default)
KERNEL FEATURES
Support RFS/EXT2/EXT3/EXT4
OC/UV with these steps: 1.6ghz, 1.5ghz, 1.4ghz, 1.3ghz, 1.2ghz, 1ghz, 800mhz, 600mhz, 400mhz, 200mhz, 100mhz
Replaced kernel jhash2 with jhash3
Adjusted kernel HZ value to improve smoothness
Optimized lowmemorykiller values
Optimized compiler flags
Voodoo Sound v9 (courtesy of supercurio)
Voodoo Lagfix (courtesy of supercurio)
Overcome CwM Recovery v4.0.0.5 (Custom built Clockworkmod v4.0.0.5)
Full support of internal/external SD cards in Recovery
Simple I/O Scheduler added and set as Default
Kernel tweaks to VM and Scheduler for better performance
Built in CIFS/TUN/SlowWork support
Touchscreen Undervolting (courtesy Koxudaxi)
RAM Undervolting
Stochastic Fair Blue (SFB) Network Scheduler
Autogroup Scheduler
Asynchronous I/O Enabled (AIO)
Backlight Notifications (Thanks to Neldar for the mod and Koxudaxi for the patch)
INSTALL GUIDE
http://www.teamovercome.net/?page_id=64
DOWNLOADS
http://www.teamovercome.net/?page_id=558
TIPS AND TWEAKS
http://www.teamovercome.net/?page_id=68
FAQ's
http://www.teamovercome.net/?page_id=66
SOURCES
https://github.com/alterbridge86
Thanks!
sohrab1985 and kay_kiat for themeing assistance!
The best is yet to come!
Those having issues with MARKET DOWNLOADS and/or /cache mounting errors in CWM Recovery, please see the following posts:
http://www.teamovercome.net/?p=1220
http://forum.xda-developers.com/showpost.php?p=15631194&postcount=5026
ROM AND KERNEL CHANGE LOG
http://www.teamovercome.net/?page_id=171
Overcome v3.0.0-ICARUS
Overcome Kernel v3.2.0 Included
BGJP4 Base Rom
Enabled Stagefright on HTTP and RTSP (eliminates lag in streaming h264 video and “not optimized for mobile” message on flash video)
Superuser/maps/voice search all updated
Overcome Kernel v3.2.0
Overcome CwM Updated to v4.0.0.5 (upstream fixes from Cyanogen tree merged)
OC/UV-capable up to 1.6ghz
Patched sources up to 2.6.35.13 (spoofed version to 2.6.35.7 to maintain compat.)
Adjusted LCD/RAM Undervolting to work properly (thanks to Koxudaxi)
Fixed 32GB Tab compatibility issues (disappearing CWM, no conversion, etc.)
Frequently Asked Questions (FAQ)
FAQ's
http://www.teamovercome.net/?page_id=66
So here we go folks - GINGERBREAD is upon us!!
Major thanks to Chainfire for his hard work on the CF-Root kernel and of course for providing us the GB code in the first place!
Install requires a restock unless your already on Gingerbread and CF-Root, the guide will walk you through this.
Why Beta1 tag? Simple...it's not done. Gingerbread is SO good I wanted to get it out into your hands as soon as possible. I performed some basic modifications and got a couple additional features functioning (screen off animation? AMAZING on 7" screen!). More features will be coming very very soon! Stay tuned for Beta 2!
PS
A GB Overcome Kernel will be coming in the future, but until we have a source there isn't much I can do in that regard. For now, Overcome releases will use the CF-Root kernel. It provides all the functionality we can hope for at the moment.
just some thoughts
This is an exciting development. It's brought new life to the Tab!
Would it make sense to include the updated (2.3.4) Google Talk client?
What about replacing the stock Music app with Google Music?
Could you include the sip application?
Can I use this release with latin tab P1000N/L
Well done alterbridge86
This must be a new record
luisfer691 said:
Can I use this release with latin tab P1000N/L
Click to expand...
Click to collapse
I highly doubt it - the normal Overcome rom doesn't.
M.
Indeed well done alterbridge86
And of cource the the people behind the scene.
Downloading now and flashing in a moment...
Yea boy
will you ever make a cm7 now that we have Ginger bread
You are the man dawg, ill give this a shot tonight
luisfer691 said:
Can I use this release with latin tab P1000N/L
Click to expand...
Click to collapse
Same as Overcome 1.x series, it will work, but poorly. Some features will be broken. You are probably better off waiting for a proper P1000N/L release (especially since this involves flashing bootloaders)
thanks alter. downloading now.
Okay it's up and running so playtime can begin.
@ Alterbridge, MK and Pittbull:
Let see if my issues are over but i think and hope it will
V6-Maniac said:
Okay it's up and running so playtime can begin.
@ Alterbridge, MK and Pittbull:
Let see if my issues are over but i think and hope it will
Click to expand...
Click to collapse
Hopefully your issues will be resolved with this brilliant new release
Let us know!
Nice Work dude .. looks good
Do i need to wipe anything. I already have the stock 2.3.3 installed and would like to flash yours.
First, thanks for your hard work at releasing your version of the new update.
And second, I got one tiny question (it confuse me a bit):
Does the link ( F6D7U1RUHD ) refering to the new gingerbread-based GB-stock-safe.zip is good (GB-stock-safe_v1.zip, 287.36Mb)?
I do ask it cause just behind the link you write "need to change!!!"
Like... A side note for yourself that you have forgot or something.
Dunno if I'm clear enough
Again, Thanks for you work!
Hi. I'm a bit confused about the instructions. If I'm on overcome 1.6.4 now, does it mean I can restock my tab by flashing the gingerbread stock safe file?
I guess when the instructions says stock, it just means the latest stock firmware right?
I was originally under the impression that I had to restock to my original at&t firmware. I guess that's not the case?
Thanks in advance and huge thanks to alterbridge!
Incredible work. I'm about to flash this all over. Looking forward to future releases! Going to donate when I have the chance!
Related
Thanks to Leshak , AndSecTest, mimocan, Unhelpful, xan, Supercurio and husq510 for the help.
This project started based on information found here:
http://forum.xda-developers.com/showthread.php?t=740514
But is has soon revolved into more fixes, patches and hacks. Thanks to all the developers involved and do buy them beers so they can continue to work on the fixes.
I've tested it to work on my phone but i cannot guarantee it will work on yours or if it will damage your phone so use it at your own risk. See known issues below if the problems have been resolved
Primary Features
- ext2/3/4
- Support I/O Scheduling for CFQ (stock), Noop, Deadline and Anticipatory
- Overclock and Undervolt support
- Overclocking for better performance. If you do not want to OC, use SetCPU to set Max at 1Ghz and enable checkbox Set on boot
- User defined Undervolt to save battery especially at lower frequencies. Use Xan's app for easy GUI control - here
- Also use Xan's app to change IO scheduling
- Rooted ADB shell for Android commander compatibility
Requirement
- i9000
- For Eclair 2.1 Only (Will not work on Froyo firmware)
My setup for cross compile without wakeup lag
- Use ct-ng crosstool
- Copy config file from arm-unknown-linux-gnueabi
Download
See attachment
Stock Kernels for reverting
Stock JM3 v3 kernel
Stock JM2 kernel
Stock XWJM5 kernel
Instructions:
- Extract the tar file from .7z
- Load tar file in PDA using ODIN and flash
- Do not check repartition and do not use pit file
- Use SetCPU to adjust frequencies
Reporting Problems
Please provide information below to help me understand:
kernel version: (eg oc120uv2-ctng)
UVLF setting (if kernel supports): (eg 50)
UVHF setting (if kernel supports): (eg 25)
descriptions:
Known Issues
- ondemand setting is unstable (need more verifications)
TO DO LIST
- BFS scheduling
- kernel modules (submit request)
Changelog
oc120_voodoo_b4.2
- enable CWM support even with voodoo ext4. Caveats: CWM will unmount /data after nandroid backup, you will not be able to remount /data in ext4 until you reboot back to recovery. Also, restore does not work when trying to restore /data.
- fixed check for debug_mode (it used to create logs in /sdcard/Voodoo/logs regardless if you enable*debug in /sdcard/Voodoo/)
oc120_voodoo_b4.1
- BLN patch v4 from neldar (http://forum.xda-developers.com/showthread.php?t=772672)
- All credit goes to author
- Signed update.zip format so rename file to update.zip and copy to /sdcard
- use recovery to flash
oc120_voodoo_b4
- updated to voodoo b4 (http://project-voodoo.org) - please read Documentation/FAQ, if you have previous installed Voodoo Beta1, please uninstall before upgrading
- Excludes color patch for later release
- All lagfix credit included in this build goes to Supercurio, please buy him a beer or two so he can continue on working on the project
oc120_voodoo_b3.1
- fixed init.d not working
oc120_voodoo_b3
- remove performance governor from startup cos i9000 dont need that
- added init.d support
oc120_voodoo_b2
- Use stock GPU ~200mhz table
- Voodoo2 lagfix (http://project-voodoo.org) - please read Documentation/FAQ, if you have previous installed Voodoo Beta1, please uninstall before upgrading
- Excludes color patch for later release
- All lagfix credit included in this build goes to Supercurio, please buy him a beer or two so he can continue on working on the project
oc120uv2
- Unhelpful patch for GPU table (http://github.com/Unhelpful/linux-galaxy/commit/5a729d3e2189159a20b00e0c331f0b112490e075)
- Interactive governor (http://github.com/Unhelpful/linux-galaxy/commit/aea72a98a2f261901d6f28f2d1deae3921d35948)
- user configurable UV settings (default value = 0 for UVLF and UVHF) for conservative governor only
- /sys/devices/system/cpu/cpu0/cpufreq/conservative/UVLF_mV (for 100-800mhz)
- /sys/devices/system/cpu/cpu0/cpufreq/conservative/UVHF_mV (above 800mhz)
- for example # echo 50 > /sys/devices/system/cpu/cpu0/cpufreq/conservative/UVLF_mV (will UV by 50mV for 100-800mhz)
- for example # echo 50 > /sys/devices/system/cpu/cpu0/cpufreq/conservative/UVHF_mV (will UV by 50mV for 1-1.2ghz)
- Setting increment of 25 (eg 25,50,75,100). Anything out range may hang
- Anything above 100 will be set to 100 (but I doubt you can get 100mV without crashing)
- After setting, do ur benchmarks and if everything is stable, you can add the command above into your init script depending which lagfix you have, add into your script.
Thanks!
Some questions:
1) the first thread about oc mentioned 1.2ghz, was this unstable for you?
2) Is this over-volted, under-volted, or no changes in voltage?
3) I'm guessing if I update to this kernal, I will loose any features of other kernals, like the lag-fix kernal?
I hope you can persuade the other devs to include this in their roms.
It this just for the unbranded SGS or does it work for TMO vibrant too?
Novek said:
It this just for the unbranded SGS or does it work for TMO vibrant too?
Click to expand...
Click to collapse
the kernel is just for the international version
it is just a test, i hv not test the limit yet.. this is a new phone so want to take it easy
i kept the voltage stock so just overclock a little and if its stable, will do more . More testing and reading is needed before i touch on the voltage.
it does not include mimocan's mod, i will work on it next release
Not Work
Hi GS S user,
not work in XXJP3 rooted Firmware!
Flash, Boot and go in Recovery menu!
Sir-ay said:
Hi GS S user,
not work in XXJP3 rooted Firmware!
Flash, Boot and go in Recovery menu!
Click to expand...
Click to collapse
XXJP3 is froyo.. android 2.2
he clearly states it works in eclair... android 2.1
Nice job cant wait to see how high the new hummingbird cpu can go. The galaxy s 2 has same cpu and is running at 2 ghz (if the leaked info is correct). I hope we can push it up to 2ghz with out to much voltage/heat increase.
[[ Cold ]] said:
XXJP3 is froyo.. android 2.2
he clearly states it works in eclair... android 2.1
Click to expand...
Click to collapse
upps
I will OC!!!!!!!!!!
Do you notice the postive effects of the overclock in any way? What does it do with benchmarks? Also do you test for (temperature) stability with some games as well, as they use the graphics card a lot which is on the same chip. Even when not overclocked the SGS can get prettty warm.
Installs nicely, oc ok to, but dont see that much increase in linpack.
Nice work tho.
Any chance to have ext 4 support in next update?
Thanks :
updated to v2
raspdeep said:
updated to v2
Click to expand...
Click to collapse
you're fast, lol. Thanks.
INeedYourHelp said:
your fast, lol. Thanks.
Click to expand...
Click to collapse
update before i go to bed
Guys, how do I use SetCpu?
Was 1.2ghz unstable?
Sent from my SGH-T959 using XDA App
interested in this... Allthough the phone does seem to get hot during heavy use, it doesn't get 'too' hot.
I have seen about 47 degrees celcius max read from battery temp (which seems to be cpu temp on our phones as my battery was stone cold)
Hi any possibility get v1 without mimocan.
Got samset including it nd sgs wnt boot cause of mimocan included.
thanks
I am using JM2. Does this make my phone any faster? Does it maked it lag free?
After tested this oc.. i am bit unsure: i get no performance increase... Is it confirmed that its functional?
- Builtin CWM (Voodoo Edition)
- Back Light Notification (BLN) v2.3.1 (http://forum.xda-developers.com/showthread.php?t=813389
- Control BLN with http://forum.xda-developers.com/showthread.php?t=823922
- Custom bootanimation support (bootanimation.zip in either /system/media or /data/local)
- BFQ IO scheduler (http://algo.ing.unimo.it/people/paolo/disk_sched/sources.php
- Tiny RCU patch for better speed and efficiency ( http://android.git.kernel.org/?p=k...mit;h=9b1d82fa1611706fa7ee1505f290160a18caf95
- Network Security Improvements by nikademus/_renaud_
- Kernel tweaks for better(?) GPS. tnx hardcore.
- OC/UV (tnx raspdeep and lastufo!) use xan voltage control to enable OC (http://forum.xda-developers.com/showthread.php?t=829731)
- Voltage app seems to bug sometimes so sometimes you have to apply twice before it updates freqs to use
- FREQS: 1280/1200/1120/1000/900/800/600/400/200/100, NO OC AS DEFAULT! (read 2 lines up)
- Added cifs/tun support
- Using JPY ramdisk
- Based on JPX Sources
Version v666
- Clockworkmod v3.0.0.5
- Special suprise when booting
- Minor fixes, some fixes, checkout my github commitlog.
- There is no OC/UV yet, will add several diffrent OC/UV versions in the next couple of days
Advanced Voodoo v666.1
- VOODOO SOUND 1.0 !
- v666.2 - OC/UV version. all other features included
http://kernel.1ug.org
BEFORE COMPLAINING THAT FLASHING UPDATE ZIP DOSENT WORK READ THIS:
What you can do for now is flash old kernel and flash update.zip and then go back to new kernel. But i would recommend all to get rom makers to change scripts!
Koush said:
Hi everyone, I understand Clockwork 3.0 has caused some issues with flashing zips and I wanted to make a post that explains why.
To give you back history, there are currently two ways to create "update.zip" scripts. The first one is "update-script", also known as Amend. It was the first version of the scripting language created by Google, and was used in Android 1.0 and Cupcake (1.5). However, Amend has two serious design flaws:
Function arguments can not span more than 1 word.
The scripting language is compiled into the recovery causing image bloat and inflexibility.
Because of this reason Google REMOVED Amend support in Donut and beyond, and instead switched to update-binary and updater-script, which is also known as Edify.
However, Amon Ra and I kept Amend support in, to help ease the transition off its usage in ROM creation. CyanogenMod itself has already switched to Edify 9 months ago.
With the recent Gingerbread source code drop and the upcoming CM7 release, I needed to merge the latest changes from Google's Gingerbread recovery into ClockworkMod recovery. This meant finally removing Amend support, and switching fully to Edify. If you flash ClockworkMod 3.0 or higher, it will no longer install Amend (update-script) zips. Version 3.0.0.4 will show you the following message:
Amend scripting (update-script) is no longer supported.
Amend scripting was deprecated by Google in Android 1.5.
It was necessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread based recovery.
Please switch to Edify scripting (updater-script and update-binary) to create working update zip packages.
Please switch to using Edify, as it will be a requirement for CM7 Gingerbread based ROMs. I gave notice about this a month ago on Twitter.
If you must absolutely flash an older Amend zip, you can always flash an older recovery or AmonRa or the like and do it manually.
UPDATE:
Here's a 2.6 version (supports both script versions) and backs up wimax:
http://koush.tandtgaming.com/recover...supersonic.img
PLEASE TEST THIS FOR ME!
Please note, that once CM7 is released, Clockwork 3.0 WILL BE A REQUIREMENT.
Click to expand...
Click to collapse
We shud get all rom packers to update their script to offical current update-script language
Wow sounds great...
Hey,
Any chance for similar tweaks on voodoo-eclair ?
Id appreciate it.
Thanks
I flashed this and now my phone does a reset every single boot... strange.
thats very strange.. i reflashed 3 new roms and tried this one.. what kernel did you have? ULF? you had any lagfixes enabled? since this is voodoo it only allows /data ext4.
Can i flash it over the voodoo kernel?
yes thats what i have done thats what i would suggest you todo. its like a normal voodoo "update"
Hmm yeah I flashed it over the steel one with advanced EXT enabled :/
Then I did a factory reset, however.
how high the cpu freq goes?
This includes the extended RAM?
1,2ghz and yes on the big ram
trasig said:
1,2ghz and yes on the big ram
Click to expand...
Click to collapse
Good to know it seems that i find the right kernel to flash. There is any instability playing games or anything 3d heavy?
And the 64k dollar question. How about the bat life?
As we have to suggest stuff...
- Add sztupy's Ultimate Lagfix which has a custom recovery.
- Add nikademus' Universal External Lagfix.
- Add the choice for a BFS Scheduler in addition to the standard CFS.
- Add all of Hardcore's Kernel, Scheduler and VM tweaks.
- Compilation optimization, the way laststufo does. Or he'll do it anyway I guess.
It's all I can think of right now. This is gonna be great! And when everything is all unified into one package, it will directly go to Cyanogenmod!
And I am really happy to see development of the SGS getting better each day. Far better than a month ago!
havent runned it long enough yet to be able to say anything about battery life. hopefully good if sleeping on low freqs (set to 400 or something with setcpu) and had no probs with games so far atleast.. 3d works fast
jaju123 said:
Hmm yeah I flashed it over the steel one with advanced EXT enabled :/
Then I did a factory reset, however.
Click to expand...
Click to collapse
shud either flash it over voodoo or a non lagfixed
There is a way to restore the original voodoo?
First thank you very much for your hard work .And how kel ghu said it i will definitly love to see sztupy's Ultimate Lagfix mixed with this awesome kernel and it will be the killer....
Imagine your galaxy s with more cpu power more ram and the Overkill advanced lagfix.... the dream.
Kel Ghu said:
As we have to suggest stuff...
- Add sztupy's Ultimate Lagfix which has a custom recovery.
- Add nikademus' Universal External Lagfix.
- Add the choice for a BFS Scheduler in addition to the standard CFS.
- Add all of Hardcore's Kernel, Scheduler and VM tweaks.
- Compilation optimization, the way laststufo does. Or he'll do it anyway I guess.
It's all I can think of right now. This is gonna be great! And when everything is all unified into one package, it will directly go to Cyanogenmod!
And I am really happy to see development of the SGS getting better each day. Far better than a month ago!
Click to expand...
Click to collapse
the whole point with this kernel is that its based on voodoo sources already using lastufos compilation optimizing.. and hardcore's bigmem.. the other tweaks dosent really make any diffrence ;p if i would make this ULF.. there is already 10 kernels like that.. and i want people to try out new voodoo stuff before supercurio releases a preview or beta but im gonna try add cwm recovery to this to =) tomorrow. its 3am and going to sleep can check on bfs.. but its pretty pointless on android.
cba1986 said:
There is a way to restore the original voodoo?
Click to expand...
Click to collapse
just flash the orginal voodoo over. this is just voodoo compiled from supercurio's git =)
memo855 said:
First thank you very much for your hard work .And how kel ghu said it i will definitly love to see sztupy's Ultimate Lagfix mixed with this awesome kernel and it will be the killer....
Imagine your galaxy s with more cpu power more ram and the Overkill advanced lagfix.... the dream.
Click to expand...
Click to collapse
wont add in ULF.. theres already prolly 5 kernels with OC+bigmem+ulf+optimizing.. but they all miss voodoo sound and color (when it comes) so here i made one from voodoo sources instead.. will try get in a recovery tomorrow but mix in ULF you could just leech any of those 5 other kernels. will be same anyway =)
trasig said:
wont add in ULF.. theres already prolly 5 kernels with OC+bigmem+ulf+optimizing.. but they all miss voodoo sound and color (when it comes) so here i made one from voodoo sources instead.. will try get in a recovery tomorrow but mix in ULF you could just leech any of those 5 other kernels. will be same anyway =)
Click to expand...
Click to collapse
flashing right now, thanks..
Do you need to set the frequencies with setcpu?
[15.July.2011][ROM][GSM][2.3.3] ◄► Overcome ROM v3.0.1-JUPITER ◄► Kernel v3.3.0 ◄►
DISCLAIMER: You know the drill, I am not responsible if loading this rom makes your Tab melt, explode, disintegrate, or cause harm to anyone near it. (I am fairly certain none of that will happen though )
Change log in second post.
ROM FEATURES
BGJP4 Base Rom - ANDROID 2.3.3
Overcome kernel v3.3.0 included
No Modem is included - due to a variety of personal preference I decided to leave that a la carte
Fully Deodexed
Fully Zipaligned
Rooted with busybox installed
Reboot/Recovery/Download options added to the power menu
Accurate battery mod with gingerbread styling
Blur removed across system (i.e. behind power option menu) - significantly improves performance
Power Off confirmation disabled
Screen off animation enabled
Overscroll Glow effect enabled
Added AppWidgetPicker
CSC set to XEU
Ads Blocked
Updated Market to 3.0.26
Updated Maps to 5.7.0
Flash Player removed due to compatibility issue - install from market and you'll be all set.
Updated GMail to 2.3.4
Updated YouTube to 2.1.6
Updated SamsungApps to 2.5.039
Updated StreetView to 1.6.0.6
Updated Thinkfree Office Suite
Removed Startup/Shutdown sounds
Cool boot animation
A2DP Bluetooth Connection Fix Integrated
SIP calling enabled over 3g AND WiFi
Fugutweaks integrated
Browser mods (enabled "Default Zoom" in settings, added "User Agent" in settings, set plugins to "on demand" by default)
KERNEL FEATURES
Support RFS/EXT2/EXT3/EXT4
OC/UV with these steps: 1.6ghz, 1.5ghz, 1.4ghz, 1.3ghz, 1.2ghz, 1ghz, 800mhz, 600mhz, 400mhz, 200mhz, 100mhz
Replaced kernel jhash2 with jhash3
Adjusted kernel HZ value to improve smoothness
Optimized lowmemorykiller values
Optimized compiler flags
Voodoo Sound v10 (courtesy of supercurio)
Voodoo Lagfix (courtesy of supercurio)
Overcome CwM Recovery v4.1.0.9 (Custom built Clockworkmod v4.0.0.9)
Full support of internal/external SD cards in Recovery
Simple I/O Scheduler added and set as Default
Kernel tweaks to VM and Scheduler for better performance
Built in CIFS/TUN/SlowWork support
Touchscreen Undervolting (courtesy Koxudaxi)
RAM Undervolting
Stochastic Fair Blue (SFB) Network Scheduler
Autogroup Scheduler
Asynchronous I/O Enabled (AIO)
Backlight Notifications (Thanks to Neldar for the mod and Koxudaxi for the patch)
INSTALL GUIDE
http://www.teamovercome.net/?page_id=64
DOWNLOADS
http://www.teamovercome.net/?page_id=558
TIPS AND TWEAKS
http://www.teamovercome.net/?page_id=68
FAQ's
http://www.teamovercome.net/?page_id=66
SOURCES
https://github.com/alterbridge86
The best is yet to come!
ROM AND KERNEL CHANGE LOG
http://www.teamovercome.net/?page_id=171
Overcome v3.0.1-JUPITER
Overcome Kernel v3.3.0 Included
Themeing tweaks (Thanks to DarkPal and friends)
Market updated to 3.0.26
CSC Changed back to that from JQ1 (this should resolve the issue with downloading zinio/kobo/etc.)
Overcome Kernel v3.3.0
Built using CodeSourcery 2011.03 toolchain (faster and more power efficient code)
Overcome CwM Recovery Updated to v4.1.0.9 (Based off ClockworkMod Recovery v4.0.0.9)
[CWM] Option under Tweaks to enable/disable shortened backlight fix
[CWM] Nandroid restore no longer borks the kernel
[CWM] No more annoying "back button disabled" (Hooray!)
[CWM] Shortened Yes/No confirmation menus
[CWM] Make /dbdata wipe when executing "factory reset/data wipe"
[CWM] Make /emmc/.android_secure wipe when executing "factory reset/data wipe"
[CWM] Complete restructuring of menus
[CWM] Streamlining of commands and elimination of some never used features that were cluttering the interface
Updated to Voodoo Sound v10
Numerous upstream patches
Add V(R) I/O Scheduler
Increase voltages to pre-Icarus levels
Removed device detection script (should resolve all issues with some users getting hung at Samsung screen or having no conversion/cwm)
Tweaks to lowmemkiller behavior
Added arm enhancement to allow CPU-supported unaligned accesses
New release - new thread! Idea behind this is to keep the amount of posts people have to crawl through down to a minimum. Enjoy!
OH WOW!!!!!!
You're Great AB86 and all the OC team
Thanks
Sent from my GT-P1000 using XDA Premium App
Downloading
So definitely solved the recovery problem?? What was causing such a messy recovery??
Pharaohnough said:
OH WOW!!!!!!
Click to expand...
Click to collapse
thanks friends
Wow, new release? that was really fast.
Thanks again guys.
Just one question, what is the version of the kernel in this new version? Because Kernel v3.3.0 is now on download page but in change logs of Overcome v3.0.1 JUPITER in the second post it says: Overcome Kernel v3.2.0 Included.
theduke89 said:
Downloading
So definitely solved the recovery problem?? What was causing such a messy recovery??
Click to expand...
Click to collapse
I'm assuming you're referring to the "disappearing" recovery...basically the way Voodoo works, since its designed to support a broad range of devices, is it runs a script to identify exactly which device its running on. This script dumps the partition table from the /dev/block/mmcblk0 and compares it to a list of known dumps. From then, it decides how to set up the file system. If it fails to find a match, it just exits out and goes to samsung init. As a result, you will either 1) boot into the ROM with the RFS file system or 2) boot into stock recovery, because that's what the stock init does.
What I've done is just remove the detection part and hard code it to a particular file system structure. The issue should definitely be resolved now.
alterbridge86 said:
I'm assuming you're referring to the "disappearing" recovery...basically the way Voodoo works, since its designed to support a broad range of devices, is it runs a script to identify exactly which device its running on. This script dumps the partition table from the /dev/block/mmcblk0 and compares it to a list of known dumps. From then, it decides how to set up the file system. If it fails to find a match, it just exits out and goes to samsung init. As a result, you will either 1) boot into the ROM with the RFS file system or 2) boot into stock recovery, because that's what the stock init does.
What I've done is just remove the detection part and hard code it to a particular file system structure. The issue should definitely be resolved now.
Click to expand...
Click to collapse
Understood, thanks it was less complicated then I thought
Feedback coming soon for Jupiter!!! You are great, friend
Just drop by to say thanks that the jupiter kernel now works on my set up (DXJPE /w ext4). I'm going to drop off to sleep too as it's over 2am here, will post impression later.
sohrab1985 said:
Wow, new release? that was really fast.
Thanks again guys.
Just one question, what is the version of the kernel in this new version? Because Kernel v3.3.0 is now on download page but in change logs of Overcome v3.0.1 JUPITER in the second post it says: Overcome Kernel v3.2.0 Included.
Click to expand...
Click to collapse
I don't know what you're talking about
(It has the proper changelog now )
This looks and works beautiful. Thanks!
Remember, for every whiner there are hundreds of satisfied users which never say a word.
Awesome rom! Thanks! Can someone tell me how to get my market to log in? I am already logged into google. But it keeps telling me to log into google and crashes. Is there a switch somewhere?
is there away to change the color of backgorund and notifaction bar to white instead of black thanks in advance
chevy383surfing said:
Awesome rom! Thanks! Can someone tell me how to get my market to log in? I am already logged into google. But it keeps telling me to log into google and crashes. Is there a switch somewhere?
Click to expand...
Click to collapse
Had the same problem, made factory reset in CWM and then it worked.
Peter Unger said:
Had the same problem, made factory reset in CWM and then it worked.
Click to expand...
Click to collapse
I just tried a factory reset and it crashed. I just now got done going through the whole procedure again. I did a factory reset under privacy in the settings. Should I be doing a factory reset from within clockwork recovery?
I actually just got it working! Thanks again for the rom!
darkness1414 said:
is there away to change the color of backgorund and notifaction bar to white instead of black thanks in advance
Click to expand...
Click to collapse
Look, theming is really personal preference. Its impossible for us to satisfy everyone's taste. The team thinks that black notification bar rocks so that's that. If you wanna change it to white, you either..
1. Apply stock theme patch
2. Learn how to theme and change it to white yourself
Sent from my GT-P1000 using XDA App
Lovely work, once again, guys. Updated using the no-wipe method. No problems at all everything working fine. Love the signal and wifi icons. Looking forward to your next offering. Thanks heaps.
Sent from my GT-P1000 using XDA App
Thanks Alterbridge and Team.
Just installed JUPITER (no wipe) over ICARUS and everthing seems to be working A-1. Love the new boot screen and the ROM is very fast and very smooth!
Just for those that may encounter the same issue:
Had a little anomaly the first time I flashed. All seem to go as it should and everything worked as it should, however, under 'SETTINGS' > 'ABOUT DEVICE', it said that the kernel was 3.3.0 (#79), but the build number was still 3.0.0- Icarus (Also, on initial boot up the boot screen was still the old Icarus screen). So, I repeated the no wipe flash procedure and everything is now working as it should. Correct kernel and build number in settings.
Thus far everything is working A-1 on this super fast and smooth ROM.
Many thanks again to Alterbridge and the Team.
[6.Aug.2011][ROM][GSM][2.3.3] ◄► Overcome ROM v3.1.0-KRATOS ◄► Kernel v3.3.1 ◄►
DISCLAIMER: You know the drill, I am not responsible if loading this rom makes your Tab melt, explode, disintegrate, or cause harm to anyone near it. (I am fairly certain none of that will happen though )
Change log in second post.
ROM FEATURES
JPA Base Rom - ANDROID 2.3.3
Overcome kernel v3.3.1 included
No Modem is included - due to a variety of personal preference I decided to leave that a la carte
Fully Deodexed
Fully Zipaligned
Rooted with busybox installed
Reboot/Recovery/Download options added to the power menu
Accurate battery mod with gingerbread styling
Blur removed across system (i.e. behind power option menu) - significantly improves performance
Power Off confirmation disabled
Screen off animation enabled
Overscroll Glow effect enabled
Added AppWidgetPicker
CSC set to XEU
Ads Blocked
Updated Market to 3.0.26
Updated Maps to 5.8.0
Flash Player removed due to compatibility issue - install from market and you'll be all set.
Updated GMail to 2.3.5
Updated YouTube to 2.1.6
Updated SamsungApps to 2.5.039
Updated StreetView to 1.6.0.6
Updated Thinkfree Office Suite
Removed Startup/Shutdown sounds
Cool boot animation
A2DP Bluetooth Connection Fix Integrated
SIP calling enabled over 3g AND WiFi
Fugutweaks integrated
Browser mods (enabled "Default Zoom" in settings, added "User Agent" in settings, set plugins to "on demand" by default)
KERNEL FEATURES
Support RFS/EXT2/EXT3/EXT4
OC/UV with these steps: 1.6ghz, 1.5ghz, 1.4ghz, 1.3ghz, 1.2ghz, 1ghz, 800mhz, 600mhz, 400mhz, 200mhz, 100mhz
Replaced kernel jhash2 with jhash3
Adjusted kernel HZ value to improve smoothness
Optimized lowmemorykiller values
Optimized compiler flags
Voodoo Sound v10 (courtesy of supercurio)
Voodoo Lagfix (courtesy of supercurio)
Overcome CwM Recovery v4.1.1.4 (Custom built Clockworkmod v4.0.1.4)
Full support of internal/external SD cards in Recovery
V(R) scheduler added and set as Default
Kernel tweaks to VM and Scheduler for better performance
Built in CIFS/TUN/SlowWork support
Touchscreen Undervolted (courtesy Koxudaxi)
RAM Undervolted
Stochastic Fair Blue (SFB) Network Scheduler
Autogroup Scheduler
Asynchronous I/O Enabled (AIO)
Backlight Notifications (Thanks to Neldar for the mod and Koxudaxi for the patch)
INSTALL GUIDE
http://p1000.teamovercome.net/?page_id=64
DOWNLOADS
http://p1000.teamovercome.net/?page_id=558
TIPS AND TWEAKS
http://p1000.teamovercome.net/?page_id=68
FAQ's
http://p1000.teamovercome.net/?page_id=66
SOURCES
https://github.com/alterbridge86
The best is yet to come!
ROM AND KERNEL CHANGE LOG
http://www.teamovercome.net/?page_id=171
Overcome v3.1.0-KRATOS
Overcome Kernel v3.3.1 Included
XWJPA Base
1080p Streaming Flash now smooth as butter
Wifi reconnect bug fixed (thanks to source built wpa_supplicant from disguztipated)
Updated Google Talk client with fully functioning one (identical to 2.3.4)
Updated Gmail to 2.3.5
Overcome Kernel v3.3.1
Overcome CwM Recovery Updated to v4.1.1.4 (Upstream fixes and enhancements)
Overcome CwM Recovery Updated to v5.1.2.6 (Upstream fixes and enhancements)
Nandroid backup fixed so that it does not require an external sd card in the device.
Nandroid restore fixed so that it does not corrupt kernel in restore process (note this will likely require a new backup with the new recovery as well)
Reverted lowmemkiller change which may have been blocking kswapd0 from sleeping, resulting in battery leakage.
Numerous upstream patches enhancing overall stability and performance
Smartass governor upgraded to SmartassV2 by Erasmux
Touchscreen sensitivity tweaked
Oh wow !!!
Oh wow !!!
Thanks Overcome team you are the best
alterbridge86 said:
ROM AND KERNEL CHANGE LOG
http://www.teamovercome.net/?page_id=171
Overcome v3.0.1-JUPITER
Overcome Kernel v3.3.1 Included
XWJPA Base
1080p Streaming Flash now smooth as butter
Wifi reconnect bug fixed (thanks to source built wpa_supplicant from disguztipated)
Updated Google Talk client with fully functioning one (identical to 2.3.4)
Updated Gmail to 2.3.5
Overcome Kernel v3.3.1
Overcome CwM Recovery Updated to v4.1.1.4 (Upstream fixes and enhancements)
Numerous Upstream improvements
Updated config_hz and user_hz to improve smoothness
Optimized compiler flags
Set V(R) Scheduler as default
Click to expand...
Click to collapse
Should say
Overcome ROM v3.1.0-KRATOS
: P
Apologise ab, tried link again and its downloading. Hats off and looking forward to it yet again.
http://mfmaju.com/cgi-sys/suspendedpage.cgi
This Account Has Been Suspended
The stock patch....its ot full stock "no battery %...etc " or gold like stock patch that we loved
Oh and thx overcome team
__coma__ said:
http://mfmaju.com/cgi-sys/suspendedpage.cgi
This Account Has Been Suspended
Click to expand...
Click to collapse
Keep trying, it will work
Just giving a run out just now. Looking good so far. Thanks Ab & thepittbull.
__coma__ said:
http://mfmaju.com/cgi-sys/suspendedpage.cgi
This Account Has Been Suspended
Click to expand...
Click to collapse
Checking in to that - that is a mirror from one of our users...will remove it from the links for now so people stop getting that error, but as mentioned by another user, try again and the download manager will assign another server
wakady said:
The stock patch....its ot full stock "no battery %...etc " or gold like stock patch that we loved
Oh and thx overcome team
Click to expand...
Click to collapse
It is the "mostly stock" stock patch lol. There is battery %, overscroll glow, and tv-off animation, but thats it. Everything else stock themed.
thanks....team
great job AB
thanks again
Thanks for your work AB new kernel updates look great!
About the customisations...
Hey guys,
Since we've decided to go the "extra mile..." with this release, please let us know how you feel with the polls I've created here...
About the bootanimation:
http://teamovercome.net/forums/index.php?topic=139.0
About the wallpapers:
http://teamovercome.net/forums/index.php?topic=140.0
and
http://teamovercome.net/forums/index.php?topic=141.0
Your feedback will help us gauge what will be included in the next release!
Thanks and enjoy!
tpb
Fantastic! ! Loving your superb efforts, release names, aaannddd making new thread for new release.
You guys are the coolest team. . .
. . . i use xda app for gtab. . .
Downloading now.
TPB, you need to fix up the 2nd poll, the title asks if we like the new wallpaper but then the question inside the thread itself asks if we like the new boot animation again ;-P
Thx m8
Love your work, but will skip this version.
Just flash jupiter 2 weeks ago
Sent from my GT-P1000 using Tapatalk
ashdragon said:
Downloading now.
TPB, you need to fix up the 2nd poll, the title asks if we like the new wallpaper but then the question inside the thread itself asks if we like the new boot animation again ;-P
Click to expand...
Click to collapse
Thanks! Fixed!
You guys...
No wipe from Jupiter to Kratos, without problem!
Bravo et merci ;-)
Sent from my GT-P1000 using Tapatalk
[06.JAN.12][ROM/KERNEL][GSM] ♫ Overcome 7 Series v4.1.0 ♫ Overcome Kernel v4.0.0 ♫
DISCLAIMER: You know the drill, I am not responsible if loading this rom makes your Tab melt, explode, disintegrate, or cause harm to anyone near it. (I am fairly certain none of that will happen though )
Change log in second post.
ROM FEATURES
P1000XWJQ8 Base Rom - ANDROID 2.3.6
Overcome Kernel 4.0.0 included
No Modem is included - due to a variety of personal preference I decided to leave that a la carte
Fully Deodexed
Fully Zipaligned
Rooted with busybox installed
Reboot/Recovery/Download options added to the power menu
Accurate battery mod
Blur removed across system (i.e. behind power option menu) - significantly improves performance
Power Off confirmation disabled
Screen off animation enabled
Overscroll Glow effect enabled
Screen on animation enabled
Added AppWidgetPicker
CSC set to XEU
Ads Blocked
Updated Market to 3.4.4
Updated Maps to 6.0.3
Flash Player removed due to compatibility issue - install from market and you'll be all set.
Updated GMail to 2.3.5.2
Updated YouTube to 2.2.16
Updated SamsungApps to 2.6.046
Updated StreetView to 1.6.0.6
Updated Thinkfree Office Suite
Removed Startup/Shutdown sounds
Cool boot animation
A2DP Bluetooth Connection Fix Integrated
SIP calling enabled over 3g AND WiFi
Fugutweaks integrated
Browser mods (enabled "Default Zoom" in settings, added "User Agent" in settings, set plugins to "on demand" by default)
KERNEL FEATURES
Support RFS/EXT2/EXT3/EXT4
OC/UV with these steps: 1.6ghz, 1.5ghz, 1.4ghz, 1.3ghz, 1.2ghz, 1ghz, 800mhz, 600mhz, 400mhz, 200mhz, 100mhz
Replaced kernel jhash2 with jhash3
Adjusted kernel HZ value to improve smoothness
Optimized lowmemorykiller values
Optimized compiler flags
Voodoo Sound v10 (courtesy of supercurio)
Voodoo Lagfix (courtesy of supercurio)
Overcome CwM Recovery v5.1.2.6 (Custom built Clockworkmod v5.0.2.6)
Full support of internal/external SD cards in Recovery
V(R) scheduler added and set as Default
Kernel tweaks to VM and Scheduler for better performance
Built in CIFS/TUN/SlowWork support
Touchscreen Undervolted (courtesy Koxudaxi)
RAM Undervolted
Stochastic Fair Blue (SFB) Network Scheduler
Autogroup Scheduler
Asynchronous I/O Enabled (AIO)
Backlight Notifications (Thanks to Neldar for the mod and Koxudaxi for the patch)
INSTALL GUIDE
http://www.teamovercome.net/p1000/?page_id=17
DOWNLOADS
http://www.teamovercome.net/p1000/?page_id=21
MIRRORS
GB-Stock-Safe-v5.zip - http://www.multiupload.com/NKB3NWGHFA
Overcome_7_Series_v4.1.0_Wipe.zip - http://www.multiupload.com/ELU4SZD9R1
Overcome_7_Series_v4.1.0_NoWipe.zip - http://www.multiupload.com/F0PCXLAT4T
Overcome_Kernel_v4.0.0.tar - http://www.multiupload.com/OR2C6MEHR6
Overcome_Kernel_v4.0.0.zip - http://www.multiupload.com/D1Y1K1U69W
Modem-JK3.zip - http://www.multiupload.com/DZA62M0QFH
Modem-JMF.zip - http://www.multiupload.com/9FYBMLFWGV
Modem-JPZ.zip - http://www.multiupload.com/3RIJ9JBU1H
Modem-TMO.zip - http://www.multiupload.com/O6MFE5MKS8
Overcome_7_Series_v4.1.0_Stock_Theme_Patch_v2.zip - http://www.multiupload.com/61CJ4GPA5I
RTL-Arabic-Shaping-Patch - http://forum.xda-developers.com/showpost.php?p=21118999&postcount=704 (Thanks Isherif!!)
Removed_Apps_v4.1.0 - http://www.multiupload.com/8C1PW9B57Q
SOURCES
https://github.com/alterbridge86
The best is yet to come!
ROM AND KERNEL CHANGE LOG
Overcome 7 Series 4.1.0
Overcome Kernel v4.0.0 Included
Rebase on P1000XWJQ8 (Android 2.3.6)
Updated Maps to 6.0.3
Updated Market to 3.4.4
Screen ON animation enabled
ICS animations added (note these will only fully work with a launcher OTHER than the TwLauncher such as ADW)
Overcome 7 Series 4.0.0
Overcome Kernel v4.0.0 Included
Fixed additional confirmation on shutdown
Updated Gmail to 2.3.5.2
Updated Maps to 5.10.1
Updated SamsungApps to 2.6.046
Updated YouTube to 2.2.16
Updated Market to 3.2.0
Build.prop tweaks to enhance smoothness
Small theming fixes
Roboto Font
Overcome 7 Series Kernel v4.0.0
Overcome CwM Recovery Updated to v5.1.2.6 (Upstream fixes and enhancements)
Nandroid backup fixed so that it does not require an external sd card in the device.
Nandroid restore fixed so that it does not corrupt kernel in restore process (note this will likely require a new backup with the new recovery as well)
Reverted lowmemkiller change which may have been blocking kswapd0 from sleeping, resulting in battery leakage.
Numerous upstream patches enhancing overall stability and performance
Smartass governor upgraded to SmartassV2 by Erasmux
Touchscreen sensitivity tweaked
THIS ->
Oh Wooowww!!!
On behalf of Pharaohnough
Oh wow !!!
;-)
is it fast enough?! Quadrant score?
rochi said:
is it fast enough?! Quadrant score?
Click to expand...
Click to collapse
Performance is very similar to the previous release - this is mostly just bug fixes and such.
can i just flash this thru cwm? or restock is essential?
Sent from my GT-P1000 using XDA App
rochi said:
is it fast enough?! Quadrant score?
Click to expand...
Click to collapse
was it even slow to start with? why don't u test and let us know.
rochi said:
is it fast enough?! Quadrant score?
Click to expand...
Click to collapse
It's actually darn slow... Quadrant scores of only in the low hundreds in my tests of a thousand runs done just for you... ;-)
Sent from my Overcome-Powered Tab!
pat19 said:
can i just flash this thru cwm? or restock is essential?
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
if you're coming from previous overcome just flash non-wipe via cwm.
kay_kiat88 said:
if you're coming from previous overcome just flash non-wipe via cwm.
Click to expand...
Click to collapse
ok. thanks.
Sent from my GT-P1000 using XDA App
at this time there is an Database Error i cant download anything...
downloading right now.
Thanks again for an other update of your perfect work!!!!
Looks like the website is down for now. But my biggest question is does this fix the issue with large apps in the market? That one was pain in the but. other than that look forward to how this one runs.
Thanks alot AB a long wait really Btw your web database error cnt download...
still...
Error establishing a database connection
Please be patient as they are probably uploading/updating posts.
It is really nice to see you guys still maintaining your release, specially this one
Reverted lowmemkiller change which may have been blocking kswapd0 from sleeping, resulting in battery leakage.
Website is back up - sorry about that!
Finally It's UP,i am now downloading
Please please PLEASE tell me that the damn media scanning on every reboot is gone
Gonna try it after charging my tab a bit...