Develop Bugs

[ROM] Elocity A7+ "EviLocity v1.0" Android 2.2 rooted rom.

ROM EviLocity 1.0 Android 2.2 Rabid ROM ----- Elocity A7+ ONLY!!!!!!!!!!!!
Main features:
- Fully rooted with proper edit to boot.img for ro.secure+0 in the default.prop
- Based on last official 3.0022 firmware ( All A7+ no old A7 components).
- Edited proper default prop to 0,1,1,1 instead of 1,0,0,0
- Removed bloat apps
- Added EStrong Suite - Task, Security, and File Manager, and Rootexplorer.
- WiFi tweaks.
- Build.prop edits for performance, ram consumption (360MB free, varies).
- 1% Battery MOD
- Some graphics and font changes
- Duplicated libraries deleted.
- Some build.prop tweaks to improve performance, wifi responsiveness, and better ram consumption, etc
- Use UOT screen transitions
- New boot animation. "Zombies" ( unfortunately the system boots so fast now, you only get to see the whole thing the first boot. LOL)
- As far a testing goes everything works
Issues - None it did not have already(so far). Still has the SOD (sleep of death) issue. I have found that utilities that can set WiFi to "sleep never" help and I used Overclock widget to set the minimum power to 500MHZ. The system by default drops to about 150-200MHZ and when it drops that low it seems to hang. I have also found having something plugged into the USB can be removed and replaced quickly and the remount causes it to let you take it out of sleep. Perhaps other overclock tool can do the same and work better?
Download EviLocityV1.0
When installing an 8GB or smaller microsd works well.
Install Instructions:
This runs like a normal update so you should still have your apps, but the following is the best way to flash this ROM. Either way backup your files before using.
If by using this mod the world comes to and end, or you are suddenly sucked back in time only to accidentally kill your grandfather leaving your future uncertain, I take no responsibility for the consequences. Oh yeah. same thing if it screws up your tablet.
USE AT YOUR OWN RISK. REMEMBER TO BACKUP ANY THING YOU WANT SAVE BEFORE FOLLOWING THESE INSTRUCTIONS. THIS WILL WIPE YOUR TABLET TO A CLEAN FACTORY-ISH STATE.
I have not tried using the built in update process in the system settings, feel free to give it a shot first, but this is the best way in MHO. Always have at least 50% battery but better still be plugged into power.
1. Copy the the update.zip file to a microsd either directly on your PC or through USB to the tablet external drive. In this case /sdcard/sdcard-disk0. Make sure it is the only update file on the card.
NEVER INSTALL ANY UPDATE FROM THE INTERNAL STORAGE. If something should go wrong you could be stuck with that same image reloading every time you try to go into recovery and you may never have a way to remove or get past it.
2. With the tablet powered off power on by holding down power button for two seconds, then release and press again and hold until you see the message " Hold power for 5 sec...."
3. Release power after the message "booting recovery kernel".
4. Wait until the Android with the triangle and exclamation over it's head pops up.
5. Press the home button to bring up the recovery menu. Use back to move down, and menu to select
6. Scroll down and select Wipe data & cache, then select Yes delete all user data . The tablet will reboot, just press and hold power until you see the recovery loading message again.
7. When complete select Wipe cache partition and wait until complete.
8. Select Apply update from external sdcard.
9. Scroll to the update.zip file and select it.
10. Wait for it to complete then select Reboot system now when prompted. Device will go through a few screen changes just sit back and wait for the boot animation.
The first boot will be slow as it has to rebuild the cache.

Thank you for the custom rom, everything functions well. However, visually, it's atrocious.

thank you. can't wait to try this rom out. im getting my A7+ in 3 weeks.
Sent from my HTC Glacier using Tapatalk 2

does this rom have the play store or market?

it does not.

found some issues
Okay after fooling around with it for a week.i have some questions;
The mic no longer works and when you have to enter a date, the dails always reset to 2014. Is this just me? Do you have any suggestions?

Awesome Post. Thanks

shamondo said:
Okay after fooling around with it for a week.i have some questions;
The mic no longer works and when you have to enter a date, the dails always reset to 2014. Is this just me? Do you have any suggestions?
Click to expand...
Click to collapse
Sorry for not getting back sooner but the mic works for me. I will have to check, but my date is showing correct right now.

[Ref] Galaxy Nexus 4.3 tips & tricks with important info to know

Hello everyone, i see here to collect and post some known and maybe unknown tips and tricks with some important information, hoping this will be useful for users.
Any more tips, tricks and suggestions from users are always welcomed. And please feel free to make corrections for any wrong or missed information in this post
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Preface:​
The Galaxy Nexus (GT-I9250) is a touchscreen Android smartphone developed by a partnership between Google and Samsung. The phone and operating system were developed collaboratively by engineers from both companies. It is the third generation successor to Google's previous flagship phones: the Nexus One and Nexus S. The Galaxy Nexus has a high-definition (1280 × 720) Super AMOLED display with curved glass, an improved camera and has an unlockable bootloader to allow further development and end-user modification. Nexus devices are the first Android devices to receive updates to the operating system. The name of this smartphone is the result of co-branding between the Samsung Galaxy and Google Nexus brands of Android smartphones. The device is known as the Galaxy X in Brazil, however, due to a trademark on the "Nexus" brand.
The Galaxy Nexus was unveiled jointly by Google and Samsung on October 19, 2011 in Hong Kong. It was released in Europe on November 17, 2011.
It is one of the few phones recommended by the Android Open Source Project for building Android from source.
The Galaxy Nexus is no longer available for sale on the Google Play Store as of October 29, 2012 with the announcement of its successor, the LG Nexus 4.
Click to expand...
Click to collapse
OTA 4.3 (JWR66Y)​
Google begins to roll Jelly Bean 4.3 on Gnex which have some notable modifications but not at the level that users expect. Not as usual, OTA begun to roll first on yakju build not takju. Users who already got their hands on the latest firmware update have reported what is new:
- More secured ADB. (as 4.2.2)
- Fix the Bluetooth audio bugs.
- Better battery performance noticed.
- Performance enhancements.
-System UI lag also gone.
-Camera rotation lag is reduced.
-Dial pad autocomplete, can be enabled from call settings.
-you will notice more ram freeing.
-Google Hindi Input is added in "Language and imput".
-supporting of App Ops (optional permissions), see here.
** 4.3 supports now "OpenGL ES 3.0" for High-Performance Graphics and "Connectivity with Bluetooth Smart devices and sensors" and "Optimized Location and Sensor Capabilities", but unfortunately, our devices does not support it.
Support for "Restricted Profiles" is only for Nexus tablets
Did you install Android 4.3 on your Nexus device? Have you noticed anything new in Android 4.3? Please post it.
Click to expand...
Click to collapse
Questions & Answers​
Q1) I didn't receive OTA update and i am on unrooted stock firmware?
A Go to Settings > Apps > All > Google Services Framework, clear data, then go to Settings > About phone > System update > Check now. repeat procedure many times.
Q2) Kies program does not recognize my Gnex, i want to update firmware?
A Gnex firmware is not supported by Samsung Kies. it is updated directly from Google.
Q3) Can i make a screen shot on stock firmware?
A Yes you can! user doesn’t need to root the device or employ third-party apps just to take a photo of what's happening on screen. Taking a screenshot is simple, just press the volume down and power buttons together. The device will quickly take a snapshot of the screen and you will find it in your notifications.
Q4) What is Barrel Roll?
A As part of Google's regular antics, it had introduced a "barrel roll" trick for desktop browsers. Type "do a barrel roll" as a search term, and Google would demonstrate the power of modern browsers by flipping everything around on your screen. Your Android device can also do a barrel roll if you speak out the same command. Again, It's great fun to show off.
Q5) How can i uninstall an app. without going to setting?
A Long-pressing on an app within the app drawer pops up a couple of menus along the top of the screen. App Info gives you the boring technical stuff about how much memory it's taking up, or you can fling it off the other way to uninstall it.
Q6) How can i go directly to the quick settings menu?
A expand notification bar by sliding two fingers.
Q7) What is inverted rendering?
A Inverted rendering is a posh way of saying it makes the pages black and turns the text white, so it looks like you're reading the internet from 1997. It also supposedly saves battery, plus is easier on the eyes if you're reading in the dark. It's under the browser's settings tab, within the accessibility area - and there's a contrast slider, too.
Q8) How can i reboot into safe mode?
A Safe mode, the savior of so many Windows PCs! If you are experiencing a problem with your Gnex and you want to determine whether it is being caused by a third-party app, long-press the power button, then long-press the Power off option. Choose OK to reboot in safe mode, which completely disables all third-party apps on your device. If the problem goes away when you’re in safe mode, you should reboot your device and start removing recently installed apps until the problem goes away.
Q9) What does reset app. preferences means?
A Android gives you loads of different options for each installed app, and on the whole this is a very good thing. Sometimes it can be a bad thing, though: you may find your phone playing up because a crucial app has been disabled, or you've changed the notifications for something important like emails. In the apps drawer, you'll find Reset app preferences under the settings. This resets all your apps on a global level, returning actions and data settings to their original levels.
Q10) What is imojis?
A "Emojis" are the Japanese version of emoticons. You can enable emoji support for the default Jelly Bean keyboard by choosing Language & input in the settings app, then going to the settings for the stock Android keyboard. Here, choose Add-on dictionaries and select Emoji for English words. When you next type certain words (there's a complete list here) you'll see its symbol appear in the predictions bar.
Q11) What is the difference between takju and yakju?
A These android builds are almost the same but there are some differences in terms of their android updates. Takju: Mobiles which brought from Google play store in USA and come with a Google wallet pre-installed. In these devices, android update is pushed by Google itself and they are almost first to receive an OTA update. Yakju: Mobiles which brought from Google store but outside of USA, update are also pushed by Google, but this update might delay by some days or weeks. So, do check your android build if your device is running android build other than takju, then change it in takju build to an OTA update first.
Q12) How do i know what is my Gnex android build?
A Download Android System Info application from play store or you can check it from Maps>setting>about.
Q13) I can not see Developer Options in settings?
A Google hide this option, to enable it just go to settings---->about phone, tap 7 times on "build number" and it will be shown in settings.
Q14) how to make apps, data and sdcard backup & restore?
A Refer to post # 286.
Q15) I received 4.3 OTA update, ADB can not recognize my Gnex. What should I do?
A Download and install Android SDK, if you already have it on your PC just update tools and platform-tools. you must have latest ADB version (1.0.31). If you do not want to install Android SDK, download attached file (thx to xaueious).
Q16) How can i make my Gnex feel snappier?
A By speeding up (or disabling) the animated fade-in effects you see when switching between tasks, you’ll see a boost in performance and faster screen transitions. Start by unhiding “Developer options” as described above. Once in “Developer options,” scroll down to the “Window animation scale” and “Transition animation scale” options and set both to .5x. You can even turn each of these off and transitioning between apps and pages will be almost instant. If you ever want to go back, remember the defaults for both of these settings are 1x.
Q17) How can i improve my gaming graphics?
A If you are a hard-core gamer, you probably already know what 4x anti-aliasing is. First, enable Developer Options as described above, then go to Settings and click on Developer Options and enable Force 4x MSAA. Multisample anti-aliasing (MSAA) is a technique used to improve image quality. Since the Gnex has a GPU capable of supporting MSAA, this setting should make your graphics look more detailed when you are playing advanced games. Keep in mind this will also cause your GPU to work harder and your device may get hotter and consume more power than normal. It’s also possible that all games may not support this.
Q18) I want to see Jelly Bean on my screen, can i?
A Yes you can, go to settings---->about phone tap quickly 4-5 times on android version, you will see a big Jelly bean, touch and hold it, you will see small flying Jelly beans.
Q19) How can i customize my LED notifications?
A A free app called Light Flow Lite allows you to take control of the colors of your notification LED. It also makes your Gnex flash one color after another. This app allows you to set the notification color for over 250 applications and system events including missed calls, low battery, no signal, voice mail, calendar reminders, Gmail messages, email messages, SMS messages, MMS messages, Twitter notifications and more.
Q20) How can i put my Gnex in fastboot/recovery mode?
A Turn off your phone, press and hold down Volume Up and Down keys + Power button at the same time until fastboot (bootloader) mode (image of an Android with Start) appears then release the keys. Press volume up or down and select recovery by pressing power button. (For stock recovery, when you see an android logo with exclamation mark, press power + volume up to see the recovery menu).
Q21) How can i put my Gnex in download mode (odin mode)?
A Turn off your phone, press and hold down Volume down + Power button at the same time until odin mode appears then release the keys.
Q22) Why google voice search is crashing when i press on mic when i am on a custom rom?
A Update google search from play store.
Q23) My Gnex screen is turning on by itself, what is happening?
A It is caused by an application, usually by live wallpapers, try to find it and delete it, or install an antivirus app., i recommend Dr.Web Anti-virus, scan, delete, wipe cache and dalvik (optional).
Q24) sometimes i lose packet data (3G) when i turn it off then on, i turn off then turn on my Gnex to enable packet data again?
A There is no need to turn your phone off and on to re-enable packet data, just long press on power button, enable airplane mode for 3-5 seconds then disable it.
Q25) I rooted my Gnex, what to do next?
A It is recommended to make a nandroid backup immediately.
Q26) I rooted my Gnex 4.3, made a nandroid backup, but i can not find my backup folder?
A Use a file manager, enable root option, your backup folder is located in data/media/clockworkmod or mnt/shell/emulated/clockwordmod.
Q27) The kernel does not support PGM, is there a solution?
A change the kernel, or install intellicover application.
Q28) Do i need to wipe cache partition when flashing a new rom?
A No, there is no need to wipe cache, because when you wipe data/factory reset, cache is wiped automatically. Some said to wipe cache and dalvik after flashing a new rom to prevent any potential conflict.
Q29) I rooted my Gnex 4.3, flash custom recovery, but when i reboot into recovery, it shows the stock recovery!?
A Every OTA update places two files on device system (that are not there on a non-update stock ROM) that re-flash the stock recovery on EVERY boot. The two files are /system/recovery-from-boot.p and /system/etc/install-recovery.sh. You need to make sure that these files are either deleted or renamed, or else custom recovery will disappear when you reboot. These files serve no purpose other than re-flashing the stock recovery on every boot. So, by using something like Root Explorer, delete or rename them, and re-flash your custom recovery.
Q30) My Gnex won't start, i can not get into fastboot mode, only i can get into download mode?
A Use odin to flash stock firmware here.
Q31) What is the easiest way to install samsung driver?
A The easiest way is to install Samsung Kies.
Q32) How can i flash stock image on my Gnex?
A See efrant thread.
Q33) What about governors, I/O schedulers.....?
A See droidphile thread.
Q34) How to properly post a kernel bug (LAST_KMSG)?
A See ciprianruse88 thread.
Q35) What is the best kernel for my Gnex?
A There is no something called "best kernel". You must try many kernels and decide what suit your rom and your need.
Click to expand...
Click to collapse
Rooting:​
Rooting is often performed with the goal of overcoming limitations that carriers and hardware manufacturers put on some devices, resulting in the ability to alter or replace system applications and settings, run specialized apps that require administrator-level permissions, or perform other operations that are otherwise inaccessible to a normal Android user. Rooting is similar to jailbreaking devices running the Apple iOS operating system. On Android, rooting can also facilitate the complete removal and replacement of the device's operating system, usually with a more recent release of its current operating system. Rooting enables all the user-installed applications to run privileged commands that are typically unavailable to the devices in their stock configuration.
Legality: The Free Software Foundation Europe argues that it is legal to root or flash any device. According to the European Directive 1999/44/CE, replacing the original operating system with another does not void the statutory warranty that covers the hardware of the device for two years unless the seller can prove that the modification caused the defect.
On July 26, 2010, the United States announced a new exemption making it officially legal to root a device and run unauthorized third-party applications, as well as the ability to unlock any cell phone for use on multiple carriers.
Safety: I Have always said that the person should learn the Android OS before rooting. It is a good idea to have an idea of what rooting is doing and what it will affect. I would say spend your time really learning the OS which is not a small task. Then, if you still feel like it, go ahead and root. While rooting can help you learn many things about your device, it also can reap very bad consequences, such as:
-Bricking your phone (or in an easier way to explain, making your phone a pretty paper weight).
-Corrupting core files.
-Stopping OTA updates from going to your phone.
-Voiding phone warranty.
-Have your phone open to malicious software and applications that can do serious harm to your phone.
As you can see, it can reap very negative things. I have read/seen people who have literally had to buy brand new phones because they tried the latest and greatest rom. Rooting is essentially something that you must take at your own risk & caution. Generally, if you follow exactly the procedure of rooting made by developers, you will be more likely on the safe side.
Root process: See jabakuba thread.
What to do after rooting?: 1) make a nandroid backup via custom recovery 2) backup efs partition (save your IMEI and NV_DATA):
Install "terminal emulator" from play store, open it and type the following (enter after each line):
Code:
su
dd if=/dev/block/mmcblk0p3 of=/sdcard/efs.img
Then move efs.img to a safe place on your pc.
Click to expand...
Click to collapse
Problems can happen:​
-Stuck into a Bootloop: Bootloops are mainly caused by system files interfering with each others which cause instability and/or crash at the boot sequence. so what to do??
Pull out battery then reinsert it, boot into recovery, wipe cache and dalvik, reboot. If not, format data, system, cache using recovery and restore stock firmware (supposing that you did a nandroid backup before). if you don't have a backup to restore, flash any custom rom from your sdcard after formatting system & data & cache. If you don't have a custom rom in your sdcard, push one from your pc using adb (supposed that you have adb file or sdk on your pc): boot into recovery, connect your phone to the computer open command prompt and write the following command then hit enter (supposing that your rom is placed on D):
Code:
adb push D:\name of rom.zip /data/media/
Or
Code:
adb push D:\name of rom.zip /sdcard/
Then
Code:
adb reboot recovery
once done, go to your phone and install the rom.zip from recovery, reboot.
If none of above methods works, then flash stock image for your Gnex using fastboot commands here.
-Phone-Triangle-computer: If your phone can not boot, can not boot in fastboot or download modes, maybe after a bad flash, and screen shows phone--triangle--computer pic, so it is sort of download mode, use odin to flash stock firmware using this tutorial.
-Nexus is quietly dead: If your phone did not respond to anything, it won't turn on, can not boot into fastboot or download mode, black screen, try "OMAP FLASH", it can save your Gnex.
For 4.2.2 only:
-AOSP Rom incompatibility: After supplying all needed hardware drivers by AOSP, developers has updated AOSPA. So you absolutely need to be up to date regarding Google Bootloaders and Radios, which are not part of the Rom. Or else your device will be incompatible, unable to make calls perhaps and maybe other issues.
Regarding Bootloader, it still the same build for 4.2.2 (primelc03) but the Radio has changed to xxlj1. So you must flash Radio to the latest build using "Fastboot" or through "Recovery":
Fastboot method:(I prefer this)
Unzip "fastboot-radio-maguro-i9250xxlj1.img.zip" (attached), put unzipped image (in the file) into fastboot folder (attached), enable "usb debugging" option, boot into fastboot mode, connect your device to your PC, open a command prompt into fastboot folder and type:
Code:
fastboot flash radio radio-maguro-i9250xxlj1.img
Hit "enter"
Code:
fastboot reboot-bootloader
Hit "enter"
Code:
fastboot reboot
Hit "enter
Recovery method:
Put "cwm-radio-maguro-i9250xxlj1.zip" (attached) into your sdcard. Boot into recovery and flash the zip file.
Click to expand...
Click to collapse
Battery Conservation Tips:​
-Enable Auto Brightness: Brightness can lure a lot of battery if not changed intelligently with time to match the surroundings, Jellybean in this case brought the “Auto Brightness” function which uses the accelerometer within the device to detect the amount of light in the surroundings and then act upon the brightness level according to it. To enable, go to Settings > Device > Display > Brightness, and tick “Automatic Brightness“. And if you want to save more battery drain, set brightness manually at low level depending on the external amount of light.
-Remove Live Wallpapers: Using a live wallpaper is another battery sucking feature. If you turn out to be truly saving battery, make sure not to use any live wallpaper. A wallpaper with a black background uses less power than a wallpaper with a light-colored background.
-Disable Location and GPS services: Keeping GPS ON at all times, decreases your battery life, so its better to disable it while not in use. To disable, go to Settings > Personal > Location access > and switch it off.
-Disable Wi-Fi or Mobile Data when not in use: Try to avoid situations when you keep your Wifi or Mobile Data ON even when the phone is set in standby.
-Manage Sync carefully: Keeping the Sync ON all the time is another reason for decreased battery life. Enable it anytime you want, manage your emails or services and again turn it off. For those who are on work and want real-time push notifications are advised not to follow this tip.
-Turn OFF Haptic Feedback and screen sounds: To save a little more on battery, its better to switch off the screen touch sounds and vibrations. To do so, go to Settings > Device > Sound and untick Dial pad touch tones, Touch sounds. Screen lock sound and Vibrate on touch.
-Turn OFF bluetooth and NFC: Disabling bluetooth and NFC when you are not using it, is another way to save battery juice.
-Follow the method of full charge and full discharge: Don’t put your phone on charging when there is the battery remaining it for another few hours unless it’s very important. Charge it when your battery is about to get totally discharged and when you put it for charging, let it get charged totally.
-Set sleep time: Check the Sleep setting (under Display) and make sure it is set to 1 minute or less.
Keep calls short: This is obvious, but how many times have you heard people on their mobile phone say, "I think my battery’s dying," and then continue their conversation for several minutes? Sometimes, the dying battery is just an excuse to get off the phone (and a good one, at that), but if you really need to conserve the battery, limit your talk time.
-Turn OFF mobile network when not in range: Its very often that you lose the mobile network when you are travelling, so its advisable to turn OFF the mobile network by switching ON Airplane mode. Go to Settings > Wireless & Networks, tick Airplane Mode.
- After each month remove your battery from mobile phone and let it rest for an hour, it will give battery a breath and it will last longer.
-You should not have to turn off your phone to charge it. Most battery chargers deliver more than enough current to power your phone and charge it at the same time. Doing so will not lengthen the charge time, and leaving a phone on allows the user to be aware of its fuel gauge, so that you can remove it when the battery is full.
-When using a car charger, do not charge the battery when the inside temperature of your car is hot. Wait until the car has cooled before you plug in the phone.
Click to expand...
Click to collapse
Gnex secret codes:​
*#*#4636#*#* Testing menu(Phone, Battery & Wifi Info, Usage Statistics).
*#06# MEID number(Display's your IMEI).
*#*#2432546#*#* Checkin(Manually check for System Updates).
*#*#8255#*#* For Google Talk service monitoring.
*#*#786#*#* Hard Reset(Wipes/Resets Data/Profile & internal storage!) (think before you do it! no warning, no go back).
*#*#1234#*#* or *#*#7873778#*#* Open superuser application.
*#123# then press dial. Shows you if you are in your home network or not (only across networks in USA/Canada).
Click to expand...
Click to collapse
Recommendations:​
-Too loud wallpapers may sometimes disturb the look of your home screen and make the icons quite invisible, simple or a less-colored wallpapers are always suggested as to be the best choice. But your choice is what matters.
- Use only essential widgets on your home screen - each widget consumes memory and processing power which can slow your down your phone.
- Uninstall apps that you don't use - after awhile your phone can get cluttered as some Apps are designed to always run in the background. If you rarely use an App, then uninstall it to free up memory and CPU resource.
- It is best to avoid task killers such as Advanced Task Killer. Android is designed to automatically pre-load certain applications, even if you don't load them yourself. If it starts to run low on memory, it will smartly unload the oldest running apps automatically. Manually killing tasks will only mean they get loaded in memory again. Task killers can make the phone slow, laggy, or drain battery life more quickly.
- Always use latest CWM or latest TWRP recoveries.
- Disable USB debugging when it is not in use. Leaving USB debugging enabled makes your phone vulnerable (e.g. lock pattern can be reset).
- Avoid putting your Gnex in direct sunlight, it may affect touch screen & your battery performance.
- Learn how to use ADB & FASTBOOT commands instead of using toolkits, the last could not function properly.
- Flash stock firmware using fastboot is preferred than using odin.
- Check rom/kernel.zip md5 before flashing if it is convenient.
- Always update applications, if available, for better performance.
- Make a backup of your data, applications, contacts...always ready to restore from your computer.
- Read, read and read before you mess with your Gnex.
- Always be sure that you are flashing the right thing for your Gnex variant.
- If you do not know what you are doing, so don't do it .
Click to expand...
Click to collapse
Did you finish reading? Please press Thanks & Rating buttons
Big thanks to the developers of attached files.

Re: [Ref] Galaxy Nexus 4.2.1 tips & tricks with some Recommendations
Great off topic post in AK thread!!!
Thanx for your love and looking out for others
"powered by AK purity v17 Kernel + purity ROM + C.R.88 Wallpapers for beauty"

Re: [Ref] Galaxy Nexus 4.2.1 tips & tricks with some Recommendations
I love this type of thread ... When my mind goes off here I have all infos
Xda with AK Kernel inside
MOD EDIT: For God's sake, Don't quote the entire OP, post edited.

anarkia1976 said:
I love this type of thread ... When my mind goes off here I have all infos
Xda with AK Kernel inside
Click to expand...
Click to collapse
thx AK. im ready for anything to add from any user :good:

Re: [Ref] Galaxy Nexus 4.2.1 tips & tricks with some Recommendations
samersh72 said:
thx AK. im ready for anything to add from any user :good:
Click to expand...
Click to collapse
If I can help ... You can TOC TOC on my door
Xda with AK Kernel inside

hell yea bro!!!!!:good::good::good::good::good::good::good::good:

great thread bro...will be very helpful to new users :good:

k786 said:
great thread bro...will be very helpful to new users :good:
Click to expand...
Click to collapse
Thx for your post bro:good:

Re: [Ref] Galaxy Nexus 4.2.1 tips & tricks with some Recommendations
I'm impressed the majority of best contributor of ak thread create a new place with his experience for help users .....
Keep up the good work
Xda with AK Kernel inside

Re: [Ref] Galaxy Nexus 4.2.1 tips & tricks with some Recommendations
anarkia1976 said:
I'm impressed the majority of best contributor of ak thread create a new place with him experience for help users .....
Keep up the good work
Xda with AK Kernel inside
Click to expand...
Click to collapse
You are the professor AK
Sent from my Galaxy Nexus using xda premium

Re: [Ref] Galaxy Nexus 4.2.1 tips & tricks with some Recommendations
Hi guy can you add to your guide reference for resolve problem Like sk8 battery .... :thumbup:
Thanks a lot for your great guide ....
I hope every user read this make a thanks to you
Xda with AK Kernel inside

Re: [Ref] Galaxy Nexus 4.2.1 tips & tricks with some Recommendations
anarkia1976 said:
Hi guy can you add to your guide reference for resolve problem Like sk8 battery .... :thumbup:
Thanks a lot for your great guide ....
I hope every user read this make a thanks to you
Xda with AK Kernel inside
Click to expand...
Click to collapse
No problem my friend:thumbup:
Sent from my Galaxy Nexus using xda premium

anarkia1976 said:
Hi guy can you add to your guide reference for resolve problem Like sk8 battery .... :thumbup:
Thanks a lot for your great guide ....
I hope every user read this make a thanks to you
Xda with AK Kernel inside
Click to expand...
Click to collapse
i couldn't figure out properly what is sk8 problem

Re: [Ref] Galaxy Nexus 4.2.1 tips & tricks with important info to know
jrgilbert79 said:
I have found out how to fix low volume phone wide and give you a reason to buy quality headphones....Guide here. http://forum.xda-developers.com/showthread.php?t=2117648
Click to expand...
Click to collapse
Thx very useful. Testing:thumbup:
Sent from my Galaxy Nexus using xda premium

The code for dialer for manual update checking is nice.
I didn't know that code even exists..

That was really helpful... Thanks!

dmourao said:
That was really helpful... Thanks!
Click to expand...
Click to collapse
you are welcome my friend:good:

Re: [Ref] Galaxy Nexus 4.2.1 tips & tricks with important info to know
Great topic got a lot useful info :thumbup:
Sent from my smartphone

Amazing
:good:
samersh72 said:
Hello everyone, i see here to collect and post some known and maybe unknown tips and tricks with some important informations, hoping this will be useful for users.
Any more tips, tricks and suggestions from users are always welcomed. And please feel free to make corrections for any wrong or missed information in this post
Questions & Answers​
Q I didn't receive OTA update and i am on stock firmware?
A Go to Settings > Apps > All > Google service framework, clear data and force close it, then go to Settings > About phone > System update > Check now. repeat procedure many times.
Q Can i make a screen shot on stock firmware?
A Yes you can! user doesn’t need to root the device or employ third-party apps just to take a photo of what's happening on screen. Taking a screenshot is simple, just press the volume down and power buttons together. The device will quickly take a snapshot of the screen and you will find it in your notifications.
Q What is Barrel Roll?
A As part of Google's regular antics, it had introduced a "barrel roll" trick for desktop browsers. Type "do a barrel roll" as a search term, and Google would demonstrate the power of modern browsers by flipping everything around on your screen. Your Android device can also do a barrel roll if you speak out the same command. Again, It's great fun to show off.
Q How can i uninstall an app. without going to setting?
A Long-pressing on an app within the app drawer pops up a couple of menus along the top of the screen. App Info gives you the boring technical stuff about how much memory it's taking up, or you can fling it off the other way to uninstall it.
Q How can i go directly to the quick settings menu?
A expand notification bar by sliding two fingers.
Q What is inverted rendering?
A Inverted rendering is a posh way of saying it makes the pages black and turns the text white, so it looks like you're reading the internet from 1997. It also supposedly saves battery, plus is easier on the eyes if you're reading in the dark. It's under the browser's settings tab, within the accessibility area - and there's a contrast slider, too.
Q How can i reboot to safe mode?
A safe mode, the saviour of so many Windows PCs! Long-press the power button, then long-press the Power off option. Choose OK to reboot in safe mode, which completely disables all third-party apps on your device.
Q What does reset app. preferences means?
A Android gives you loads of different options for each installed app, and on the whole this is a very good thing. Sometimes it can be a bad thing, though: you may find your phone playing up because a crucial app has been disabled, or you've changed the notifications for something important like emails. In the apps drawer, you'll find Reset app preferences under the settings. This resets all your apps on a global level, returning actions and data settings to their original levels.
Q What is imojis?
A "Emojis" are the Japanese version of emoticons. You can enable emoji support for the default Jelly Bean keyboard by choosing Language & input in the settings app, then going to the settings for the stock Android keyboard. Here, choose Add-on dictionaries and select Emoji for English words. When you next type certain words (there's a complete list here) you'll see its symbol appear in the predictions bar.
Q I can not see Developer Options in settings?
A Google hide this option on JB 4.2.1, to enable it just go to settings---->about phone, tap 7 times on "build number" and it will be shown in settings.
Q I want to see Jelly Bean on my screen, can i?
A Yes you can, go to settings---->about phone tap quickly 4-5 times on android version, you will see a big Jelly bean, touch and hold it, you will see small flying Jelly beans.
Q How can i put my Gnex in fastboot/recovery mode?
A Turn off your phone, press and hold down Volume Up and Down keys + Power button at the same time until fastboot (bootloader) mode (image of an Android with Start) appears then release the keys. Press volume up or down and select recovery by pressing power button.
Q How can i put my Gnex in download mode (odin mode)?
A Turn off your phone, press and hold down Volume down + Power button at the same time until odin mode appears then release the keys.
Q Why google voice search is crashing when i press on mic when i am on a custom rom?
A Update google search from play store.
Q My Gnex screen is turning on by itself, what is happening?
A It is caused by an application, usually by live wallpapers, try to find it and delete it, or install an antivirus app., i recommend this, scan, delete, wipe cache and dalvik (optional).
Q sometimes i lose packet data (3G) when i turn it off then on, i turn off then turn on my Gnex to enable packet data again?
A There is no need to turn your phone off and on to re-enable packet data, just long press on power button, enable airplane mode for 3-5 seconds then turn it off.
Q I rooted my Gnex, what to do next?
A It is recommended to make a nandroid backup immediately.
Q I rooted my Gnex 4.2.1, made a nandroid backup, but i can not find my backup folder?
A Use a file manager, enable root option, your backup folder is located in data/media/clockworkmod or mnt/shell/emulated/clockwordmod.
Q The kernel does not support PGM, is there a solution?
A change the kernel, or install intellicover application.
Q Do i need to wipe cache partition when flashing a new rom?
A No, there is no need to wipe cache, because when you wipe data/factory reset, cache is wiped automatically. Some said to wipe cache and dalvik after flashing a new rom to prevent any potential conflict.
Q I rooted my Gnex 4.2.1, flash custom recovery, but when i reboot into recovery, it shows the stock recovery!?
A Every OTA update places two files on device system (that are not there on a non-update stock ROM) that re-flash the stock recovery on EVERY boot. The two files are /system/recovery-from-boot.p and /system/etc/install-recovery.sh. You need to make sure that these files are either deleted or renamed, or else custom recovery will disappear when you reboot. These files serve no purpose other than re-flashing the stock recovery on every boot. So, by using something like Root Explorer, delete or rename them, and re-flash your custom recovery.
Q My Gnex won't start, i can not get into fastboot mode, only i can get into download mode?
A Use odin to flash stock firmware here.
Q What is the easiest way to install samsung driver?
A The easiest way is to install Samsung Kies.
Q How can i flash stock image on my Gnex?
A See efrant thread.
Q What about governors, I/O schedulers, TCP congestion?
A See MBQsniper thread.
Q How to properly post a kernel bug (LAST_KMSG)?
A See ciprianruse88 thread.
Q What is the best kernel for my Gnex?
A There is no something called "best kernel". You must try many kernels and decide what suit your rom and your need. But for me AK kernel is the most active kernel in update releases that suit most roms.
Rooting:​
Rooting is often performed with the goal of overcoming limitations that carriers and hardware manufacturers put on some devices, resulting in the ability to alter or replace system applications and settings, run specialized apps that require administrator-level permissions, or perform other operations that are otherwise inaccessible to a normal Android user. Rooting is similar to jailbreaking devices running the Apple iOS operating system. On Android, rooting can also facilitate the complete removal and replacement of the device's operating system, usually with a more recent release of its current operating system. Rooting enables all the user-installed applications to run privileged commands that are typically unavailable to the devices in their stock configuration.
Legality: The Free Software Foundation Europe argues that it is legal to root or flash any device. According to the European Directive 1999/44/CE, replacing the original operating system with another does not void the statutory warranty that covers the hardware of the device for two years unless the seller can prove that the modification caused the defect.
On July 26, 2010, the United States announced a new exemption making it officially legal to root a device and run unauthorized third-party applications, as well as the ability to unlock any cell phone for use on multiple carriers.
Safety: I Have always said that the person should learn the Android OS before rooting. It is a good idea to have an idea of what rooting is doing and what it will affect. I would say spend your time really learning the OS which is not a small task. Then, if you still feel like it, go ahead and root. While rooting can help you learn many things about your device, it also can reap very bad consequences, such as:
-Bricking your phone (or in an easier way to explain, making your phone a pretty paper weight).
-Corrupting core files.
-Stopping OTA updates from going to your phone.
-Voiding phone warranty.
-Have your phone open to malicious software and applications that can do serious harm to your phone.
As you can see, it can reap very negative things. I have read/seen people who have literally had to buy brand new phones because they tried the latest and greatest rom. Rooting is essentially something that you must take at your own risk & caution. Generally, if you follow exactly the procedure of rooting made by developers, you will be more likely on the safe side.
Problems can happen:​
-Stuck into a Bootloop: Bootloops are mainly caused by system files interfering with each others which cause instability and/or crash at the boot sequence. so what to do? pull out battery then reinsert it, boot into recovery, wipe cache and dalvik, reboot. If not, format data, system, cache using recovery and restore stock firmware (supposing that you did a nandroid backup before). if you don't have a backup to restore, flash any custom rom from your sdcard after formatting system & data & cache. If you don't have a custom rom in your sdcard, push one from your pc using adb (supposed that you have adb file or sdk on your pc): boot into recovery, connect your phone to the computer open command prompt and write the following command then hit enter (supposing that your rom is placed on D):
Code:
adb push D:\name of rom.zip /data/media
once done, go to your phone and install the rom.zip from recovery, reboot.
If none of above methods works, then flash stock image for your Gnex using fastboot commands here.
-Nexus is quietly dead: If your phone did not respond to anything, it won't turn on, can not boot into fastboot or download mode, black screen, try "OMAP flash", it can save your Gnex OMAP FLASH.
Battery Conservation Tips:​
-Enable Auto Brightness: Brightness can lure a lot of battery if not changed intelligently with time to match the surroundings, Jellybean in this case brought the “Auto Brightness” function which uses the accelerometer within the device to detect the amount of light in the surroundings and then act upon the brightness level according to it. To enable, go to Settings > Device > Display > Brightness, and tick “Automatic Brightness“.
-Remove Live Wallpapers: Using a live wallpaper is another battery sucking feature. If you turn out to be truly saving battery, make sure not to use any live wallpaper.
-Disable Location and GPS services: Keeping GPS ON at all times, decreases your battery life, so its better to disable it while not in use. To disable, go to Settings > Personal > Location access > and switch it off.
-Disable Wi-Fi or Mobile Data when not in use: Try to avoid situations when you keep your Wifi or Mobile Data ON even when the phone is set in standby.
-Manage Sync carefully: Keeping the Sync ON all the time is another reason for decreased battery life. Enable it anytime you want, manage your emails or services and again turn it off. For those who are on work and want real-time push notifications are advised not to follow this tip.
-Turn OFF Haptic Feedback and screen sounds: To save a little more on battery, its better to switch off the screen touch sounds and vibrations. To do so, go to Settings > Device > Sound and untick Dial pad touch tones, Touch sounds. Screen lock sound and Vibrate on touch.
-Turn OFF bluetooth: Disabling bluetooth when you are not using it, is another way to save battery juice.
-Turn OFF mobile network when not in range: Its very often that you lose the mobile network when you are travelling, so its advisable to turn OFF the mobile network by switching ON Airplane mode. Go to Settings > Wireless & Networks, tick Airplane Mode.
Gnex secret codes:​
*#*#4636#*#* Testing menu(Phone, Battery & Wifi Info, Usage Statistics).
*#06# MEID number(Display's your IMEI).
*#*#2432546#*#* Checkin(Manually check for System Updates).
*#*#8255#*#* For Google Talk service monitoring.
*#*#786#*#* Hard Reset(Wipes/Resets Data/Profile & internal storage!) (think before you do it! no warning, no go back).
*#*#1234#*#* or *#*#7873778#*#* Open superuser application.
Recommendations:​
-Too loud wallpapers may sometimes disturb the look of your home screen and make the icons quite invisible, simple or a less-colored wallpapers are always suggested as to be the best choice. But your choice is what matters.
- Always use latest CWM or latest TWRP recoveries.
- Disable USB debugging when it is not in use. Leaving USB debugging enabled makes your phone vulnerable (e.g. lock pattern can be reset).
- Avoid putting your Gnex in direct sunlight, it may affect touch screen & your battery performance.
- Learn how to use ADB & FASTBOOT commands instead of using toolkits, the last could not function properly.
- Flash stock firmware using fastboot is preferred than using odin.
- Check rom/kernel.zip md5 before flashing if it is convenient.
- Always be sure that you are flashing the right thing for your Gnex variant.
- If you do not know what you are doing, so don't do it .
Did you finish reading? Don't forget to press Thanks & Rating buttons ​
Click to expand...
Click to collapse
Its Amazing post .. Thanx buddy .. Good luck for the future ..

Re: [Ref] Galaxy Nexus 4.2.1 tips & tricks with important info to know
Subscribed! Awesomeeee OP! this is soo worth a sticky!
Sent from my Nexus Prime

[DEV][ROM][JB 4.3][Unofficial] PAC-man

Issue:
No BT call.
Broken audio in VOIP (viber,skype,teamspeak etc). Tinyalsa would fix that, but it breaks calls.
Mic key (voice search) works, you need to enable: settings -> system -> hardware keys -> enable custom actions (check) and app switch set to voice search.
To get home key logn press action: settings -> system -> hardware keys -> enable custom actions (check) and home key (long press) set to Recent app switcher
When you upgrade, phone app may not work, you must remove the shourtcut, and readd. (thanks scotte9999)
Sometimes it stuck boot logo (cm,samsung,roger), please remove the battery and wait atleast 5 minutes,
Offline charger, you can leave with removing charger and holding power button for 2 sec, and glide will boot.
Liblight works very simple, when your lcd birghtness low buttons and keyboard light is on. You can use qwertyled or other liblight,read more.
Slow storage performance in some apps.
download
http://dualhoki.vim.hu/bubor/dev/pac_i927_4.3.Build-1_20140225-111215.zip
http://rpi.bubor.hu/bubor/dev/pac_i927_4.3.Build-1_20140225-111215.zip
changelog
20130912: phone encrypt support
20130913: BT LPM support, overclock support
20130921: PACMAN update
20130925: camera and charger
20131002: www/com key fix
20131007: PACMAN update
20131018: keyboard arrow fix
20131028: vibration intesity
20140102: just PACMAN update
20140225: just PACMAN update, I havent tested.
install
factory default
install zip
gapps included in my zip file, you dont need to install any gapps

reserved
can´t swap SDCards
edit /sysrem/build.prob and add:
Code:
# Change to 1 for swapping SD cards
persist.sys.vold.switchexternal=1
below
Code:
# Storage configuration
ro.vold.switchablepair=/storage/sdcard0,/storage/sdcard1
You can use recovery installable zip: http://dualhoki.vim.hu/bubor/dev/swap-internalsd-externelsd.zip
gyroscope fix
power off the phone (better remove battery for sure), put on a desk, power on and wait, it shoud calibrate itself.
Credits:
* tonyp https://github.com/tonyp/android_vendor_google
* Epsylon3 https://github.com/tpruvot/android_device_samsung_i9103
* kick buttowski
* Adam77Root
* yohan4ws
* gtmaster303
* The-Covenant team
* dman3285
* thegreatergood
* spyke555

yippppy downloading right now

thanks bubor, looks great

How do I make the keyboard lights work ?
---------- Post added at 03:18 AM ---------- Previous post was at 03:14 AM ----------
greeneyez15o said:
How do I make the keyboard lights work ?
Click to expand...
Click to collapse
nvmd

Do I need to download gapps for this? Or is it included?

Kombatant said:
Do I need to download gapps for this? Or is it included?
Click to expand...
Click to collapse
included, original gapps doesnt compatible with tegra2 devices.

Thanks for the quick reply man, flashing as we speak; haven't updated my ROM in ages Will report back any findings.
edit: Apart from some text to speech crashes, everything's peachy so far

so far so good gooodwork!

flashed, no problem so far (except the known issues). No lag wake or delayed-until-wake SMS seen, but i've just flashed the ROM for 12 hours so I can say that they are reduced, but i'm not sure if they are fixed or not. I prefer the old style quick setting button, but this is good tho

Wow, I was surprised at how functional this was for how new the thread is.Everything I've tried has worked with no issue (basic functions, data, a2dp bluetooth, sd card, wifi, gps). going to try and Wifi tether and actually trying to use the "phone" functins when I get a chance.
One thing so far, I don't think this has been said, is that the recents takes forever to pop up (like 6-7 seconds!). I tried remapping it away from the home button, but it still didn't speed up.
Also, where do I customise those handy shortcuts in the recents? and wtf is a ribbon?

it looks like there's some problem with the WiFi toggling.
Action: pressing the WiFi button on quick setting panel and the quick pulldown menu
Expected result: the button flipped and show the new icon indicate that the WiFi has been turned on
Actual result: the button flipped, but the icon is still the old one (it's the icon when WiFi is off)
I tried going to setting and press the WiFi button, it switched from "Off" to "On" and stayed there for about 10 seconds, then switched bak to "Off" again.
It's pretty rare 'cause I only met this twice after 2 days using, a reboot will solve the problem.

Tyfighter said:
Wow, I was surprised at how functional this was for how new the thread is.
Click to expand...
Click to collapse
Seconded and signed, this is a quality release from the get go. Cheers man!

Question for you, since I am currently running PAC do I need to do a complete wipe/reset prior to flashing this update?

PghSportsGuy said:
Question for you, since I am currently running PAC do I need to do a complete wipe/reset prior to flashing this update?
Click to expand...
Click to collapse
better, but not must.
Phone app changed, so you must remove shortcuts and readd.

Bug: when you try to use the navbar widgets, the system UI get crash.
Sent from my SGH-I927 using xda app-developers app

Today I got a lot of "Cell Broadcasts" messages, contents are unreadable (only weird symbols), this ended after a reboot, anyone ?
BTW, when plugin in the charger while the phone is off it displays a charging icon (a circle with a battery), normally it will automatically turns on the phone when the battery reaches - let's say - 15%. But to this ROM it doesn't, I have to do a manual reboot.

hi
help
I can not download apps from google play
expl:
facebook could not be download due to an error. (error retrieving information from server . [RPC:S-5:AEC-0])

dadashi.reza said:
hi
help
I can not download apps from google play
expl:
facebook could not be download due to an error. (error retrieving information from server . [RPC:S-5:AEC-0])
Click to expand...
Click to collapse
did you do full wipe install?

bubor said:
did you do full wipe install?
Click to expand...
Click to collapse
yes dear bubor...
I had to flash 4.2.2
4.3 rom after reset stay on rogers logo

[ROM][CM7] Defy Pro XT560 Support Thread

This is a support thread for the ROM posted here.
http://forum.xda-developers.com/showthread.php?p=49394355
* It is very important to clear factory data/cache after installing the CM7 rom.
* If your stuck on the android boot screen, connect usb and do a logcat to see what it is crashing on.
* The battery_charger has been replaced in this build as a safety backup to get into bootmenu. Anytime the phone is powered off and then plugged in it will boot to bootmenu instead of the charging screen.

* It is very important to clear factory data/cache after installing the CM7 rom.
Click to expand...
Click to collapse
I make all wipe data/cache and even Dalvik cache before and after install CM7 - but I stuck on the android boot screen.
But note: I made all wipes from CWM, because stock recovery is not works on my phone (only green robot and yellow triangle and that's all - nothing key works, only pull battery helps).
* If your stuck on the android boot screen, connect usb and do a logcat to see what it is crashing on.
Click to expand...
Click to collapse
How can I make this (run logcat)?
Thanks for the advices.

Im not sure the clear data/cache works right in CWM. I have not tested it. To access the menu in the stock recovery hit the Home key.
To output a logcat open a command prompt and run "adb logcat"
If you want to output it to a file use "adb logcat > filename.txt"

so there is some querrys:
- torch app does not work as a flashlight, while it stay in status bar and even task killer wont help
- led notification light does not work at all, i guess there is no app for that and original is missing
- it wont unlock sim card, or lock it while it's unlocked. message is "incorrect pin". previously unlocked on other phone sim works fine. pin correct.
- the reboot menu list wont operate with joystick, only touch.
- both cameras wont work in skype, when forced induce crash.
- dev tools options become a force close
- voice dialer started by long press call button opens in wrong screen orientation and does not work. it work if started from all apps.
- superuser does not ask about allowing su permissions, there is no app listed as allowed su perm. while all super su apps works fine as usual.
- yandex maps app issue. rendering map result is quite not what it should be

I did it! Thanks for stock recovery main key (Home) .
And now some my notes (first, I use Russian language and CM7 has it).
- torch app doesn't work - this right for me too;
- about led - not work too;
- about sim - not check this yet;
- the reboot menu OPERATE for me with D-Pad;
- I don't use Skype;
- dev tools work in full for me;
- all correct about voice dialer;
- it's right too;
- don't install yandex maps yet.

wifi is not work

clxer said:
wifi is not work
Click to expand...
Click to collapse
was't been working for me too, but first reboot solved it
a lot of apps that uses the hardware gpu does not work properly, i guess this is same as camera driver problem and it can't be resolved till motorola releases it freely(only if)
also i am having issue with call ringtone - it rings for fraction of a second and then goes silent

I missed some egl librarires in the build, copying the attached files to /system/lib/egl should correct some of the graphic issues.
retr13 said:
was't been working for me too, but first reboot solved it
a lot of apps that uses the hardware gpu does not work properly, i guess this is same as camera driver problem and it can't be resolved till motorola releases it freely(only if)
also i am having issue with call ringtone - it rings for fraction of a second and then goes silent
Click to expand...
Click to collapse

superdave said:
I missed some egl librarires in the build, copying the attached files to /system/lib/egl should correct some of the graphic issues.
Click to expand...
Click to collapse
antutu now running, mx harddecoding on the other hand dont
yandex. maps still weird

Good Job, and thank you
By the way, Pls tell me how to root defy pro.
I had tried many tools but both fail.

jimway said:
By the way, Pls tell me how to root defy pro.
I had tried many tools but both fail.
Click to expand...
Click to collapse
With poot.apk
http: / / ofimatica-programacion[dot]blogspot[dot]com/2014/02/rootear-telefonos-android-sin-necesidad[dot]html

Any updates?
edit- specifically, does CM7 fix the poor bluetooth A2DP quality of the stock ROM?
Sent from my XT560 using xda app-developers app

Firmware Update to Marshmallow - GPS Stopped Working

Hi!
I've made a post in the Asus forum, with no luck and I found this page where you seem more technical :
Two days ago I downloaded the Android MM 6.0 update from the Asus Homepage downloading the version WW-4.21.40.144 , since I live in Brazil and the phone was bought here. I followed all the steps one by one till it got updated.
The problem is, since then my GPS is not working (Waze, Googlemaps ans several apps).
I tryed:
1. Giving all permissions of location to the apps
2. Puting the settings in High Accuracy
3. Restarting the phone several times.
4. Switch on and off Airplane mode and 2G 3G ands 4G (I read sometimes its interference from that)
5. Waiting almost an hour with the phone outside (sunny day) to see if it detects the satellites.
6. Every app inthe appstore that promise GPS Fixing (reseting, A-GPS and all kind of tests. Funny thing, the sensor IS working acording to those apps.
7. Factory Reset
8. Factory Reset and Erase Cache from the bootmenu. (as indicated in the Asus Forum)
9. Downgraded to Lolipop again. WW-52.20.40.196
10. Again every app to reset the GPS.
Nothing worked.
To my surprise, now I have Lolipop and no GPS. So back to basics but, worst.
The Asus forum told me to Update to the latest version, which I did:
1. Updated my phone with the latest MM version. 4.21.40.223.
2. Put the location options in "High Accuracy" and permissions needed for the apps.
3. As the old software was installed after that, I tried Waze. No GPS Signal was found.
4. Did a factory reset.
5. Put the location options in "High Accuracy" and permissions needed for the apps
6. Installed the apps GPS Toolbox and Waze again, the both can't find a GPS signal. I left the phone outside for 10 minutes.
7. Tried to install the version UL-Z00A-WW-2.20.40.198-user by bootloader, but it says it cannot update to an older version, which sounds about right. (I had to try)
What else can I do? I don't mind going back to Lolipop, but when I did GPS didn't work.
Is there any chance the new Update wrote something apart from software in the chipset that cannot be undone?
Help please, I really need the GPS!
Phone not rooted.
Thanks!
Juan

After long hours of searching, reading and trying I got it fix. How?
0. Have a full charged battery or have your phone plugged to the wall (except for the USB stuff on step number 2, obviously)
0.1. Make backups of all the info in the phone, because everything is going to be erased.
1. Download the version WW-52.20.40.196 from Asus website.(unless you need the other like CN, JK, etc, see Asus site to be sure)
2. Copy it to the internal storage of your phone in the root of it (not in any folder), via USB.
3. Get to the boot loader (Turn off phone and once is off, push the power button with the Up volume one until it vibrates 2 times. Release only the power button until the menu appears) - Search the forum for more details.
4. Select "Recovery Boot" with the volume buttons and press the power button to confirm.
The next steps are all in the Recovery Menu (once it finishes every step it goes back to the original menu, no alerts, sounds or nothing. So check every now and then)
5. Make a Wipe/factory reset, and wait, it takes some time. (use the volume buttons and press the power button to confirm)
6. Make a Wipe of the cache. (use the volume buttons and press the power button to confirm)
7. Install update from Internal storage selecting the name of file you copied on step number 2 (use the volume buttons and press the power button to confirm). It will take a while.
8. Reboot the system (use the volume buttons and press the power button to confirm)
It will restart with the phone in the Lolipop version and the GPS working fine. Even after the Lolipop updates.
Marshmallow update has a bug, that at least with my phone the GPS doesn't work. Tried reinstalling marshmallow latest version after the GPS got fix, just to prove the point, and in fact, it stopped working again.
Then I did all the steps above again and went back to normal again.
I STRONGLY RECOMMEND NOT TO UPDATE TO MARSHMALLOW WITH THE ACTUAL FIRMWARE VERSIONS AVAILABLE.

I also had this problem with Marshmallow ROM, as the GPS is not working in terms of unable to locate any signal from satellites.
However, I also solved the problem with a method sounds very silly.
I turn on my GPS overnight using an application called GPS Status.
The night I turn it on, it was locating 0 satellite (it will write 0/0 SAT). However in the morning, I found that the GPS is now working, locking on 8 out of 24 discovered satellite (it wrote 8/24 SAT).
Now my GPS is working seamlessly.

Thanks! I will try it next weekend. I need my phone this week. Hahaha
I ll post when I do so.
Do you know other similar cases of people who did that and worked?
The thing is, now I have Lollipop again an I noticed how slow the system is running with applications. I d love to have the update, but not sacrificing the GPS

I decided I won't make the test because it doesn't justify the risk and time.
I'll wait for a newer update or just stay with Lollipop.
Just to let you guys know in case someone was waiting for this

I downloaded GPS Status as suggested by SleepingAran and ran it once. Now my Waze is working seamlessly. Thanks!

There's another simple solution that works:
Follow exact steps:
1. Turn on location and set high accuracy mode
2. Open google maps
3. Move your phone several times in the shape of 8 (8-10 times should be enough)
4. Close google maps and clear it from recents screen
5. Start google maps again. Profit
Credits: @say99

If nothing helps, please take a look on my post here.