I don't take credit for the mod, it's originally done by SNQ for Desire. Here's his post in Desire section. I just made a small adaptation for the mod in churcial-oj.kl, took libui.so "as is", and tested on my MT4G running RoyalPanache - and it worked.
Please use extreme caution and back up everything before you apply this mod, as it's tested only on my device. There is no easy flashy going back, to go back you'll need to adb push the correct file from your ROM back in place, or reflash your ROM completely.
Feel free to report the results, but I'm not sure I'll be able to do anything if it won't work. It will work for some, since it works for me. I just hope this thread gets the mod going and it'll be polished eventually.
Instructions:
Flash the attached file in recovery.
Thanks jack!! Much appreciated
Jack_R1 said:
I don't take credit for the mod, it's originally done by SNQ for Desire. Here's his post in Desire section. I just made a small adaptation for the mod in churcial-oj.kl, took libui.so "as is", and tested on my MT4G running RoyalPanache - and it worked.
Please use extreme caution and back up everything before you apply this mod, as it's tested only on my device. There is no easy flashy going back, to go back you'll need to adb push the correct file from your ROM back in place, or reflash your ROM completely.
Feel free to report the results, but I'm not sure I'll be able to do anything if it won't work. It will work for some, since it works for me. I just hope this thread gets the mod going and it'll be polished eventually.
Instructions:
Flash the attached file in recovery.
Click to expand...
Click to collapse
Thanks for the post, will give it a try now
Not working for me on Royal Panache
illfxckinqwill said:
Not working for me on Royal Panache
Click to expand...
Click to collapse
Same here... Thanks Jack for the find.
Me three.
Thanks for the effort. No good on Fusion
Sent from my HTC Vision using XDA Premium App
Do we need to wipe caches or fix permissions maybe I was just downloading fusion to give it a try too
Sent from my HTC Glacier using XDA Premium App
No wiping should be necessary, and it should definitely work on RoyalPanache. Let me check for a couple of possible reasons and I'll update.
[edit] Ok, just checked and I see that update.zip doesn't update. Will be fixed and uploaded ASAP.
OK, uploaded updated ZIP that I've checked on my device.
In case it still doesn't work, it'll help me a lot to receive the output of the following 2 ADB commands:
Code:
adb shell cat /system/usr/keylayout/curcial-oj.kl
adb shell ls -l /system/lib/libui.so
Works on fusion!! No wiping necessary
Sent from my HTC Vision using XDA Premium App
Jack_R1 said:
OK, uploaded updated ZIP that I've checked on my device.
In case it still doesn't work, it'll help me a lot to receive the output of the following 2 ADB commands:
Code:
adb shell cat /system/usr/keylayout/curcial-oj.kl
adb shell ls -l /system/lib/libui.so
Click to expand...
Click to collapse
Working now, you the man Jack_R1 !! Thanks man.
TrueBlue_Drew said:
Working now, you the man Jack_R1 !! Thanks man.
Click to expand...
Click to collapse
It works thanks a lot man this made my day, no more power button to wake my phone anymore
Sent from my HTC Vision using XDA Premium App
Works. Thanks.
Side comment, it does not turn the screen back off, however. Not complaining, just pointing out.
Thanks. It works great.
Sent from my HTC Glacier using XDA App
Thnxx alot for the find was waiting for this
Sent from my HTC Vision using XDA Premium App
Don_Perrignon said:
Side comment, it does not turn the screen back off, however. Not complaining, just pointing out.
Click to expand...
Click to collapse
The screen being turned off is not easy to implement on the OS level - I tried and couldn't, preventing the keypress from going to HtcLockScreen for processing (which wakes up the phone) didn't work for me. On the other hand, any HTC lockscreen can be easily modified to implement sleep on trackpad press - I did it for several ROMs. Currently I'm trying to modify the latest Kingdom 0.10 Sense 3.0 lockscreen for Panache, to do just that.
Works great for me. Thanks.
Sent from my HTC Vision using XDA Premium App
Jack_R1 said:
The screen being turned off is not easy to implement on the OS level - I tried and couldn't, preventing the keypress from going to HtcLockScreen for processing (which wakes up the phone) didn't work for me. On the other hand, any HTC lockscreen can be easily modified to implement sleep on trackpad press - I did it for several ROMs. Currently I'm trying to modify the latest Kingdom 0.10 Sense 3.0 lockscreen for Panache, to do just that.
Click to expand...
Click to collapse
Sweet. You all are amazing. Thanks for the reply.
Can anyone else confirm this mod is working well on Fusion.
Related
what do i do? i was flashing cm 7.03 and now its just stuck on the screen where the blue arrow goes around and around. what do i do? any help is appreciated.
happymfeet said:
what do i do? i was flashing cm 7.03 and now its just stuck on the screen where the blue arrow goes around and around. what do i do? any help is appreciated.
Click to expand...
Click to collapse
Take out the battery. Put it back in and start your phone again. If the same happens repeat the battery pull but this time hold down on the volume bar and THEN press the power button to restart your phone. After it starts up in bootloader select recovery by moving the volume bar and then hit the power button again. This will bring you back to recovery where you can flash the rom again or restore your backup.
EdKeys said:
Take out the battery. Put it back in and start your phone again. If the same happens repeat the battery pull but this time hold down on the volume bar and THEN press the power button to restart your phone. After it starts up in bootloader select recovery by moving the volume bar and then hit the power button again. This will bring you back to recovery where you can flash the rom again or restore your backup.
Click to expand...
Click to collapse
Thanks im restoring my backup now. I thought i had bricked my phone or something. i just rooted my phone so this was my first ROM that i was flashing so I wasn't sure of what to do.
I know this going to sound stupid, but can anybody point me to a guide or video on how to flash roms? Im new to all this so I dont want to mess anything up.
happymfeet said:
I know this going to sound stupid, but can anybody point me to a guide or video on how to flash roms? Im new to all this so I dont want to mess anything up.
Click to expand...
Click to collapse
YouTube is your best friend sir. I wish I had one to direct you to, but a Google or YouTube search with do you just fine.
Sent from my HTC Vision using XDA Premium App
happymfeet said:
I know this going to sound stupid, but can anybody point me to a guide or video on how to flash roms? Im new to all this so I dont want to mess anything up.
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=jYOzWLVnBuc&feature=fvst
Note: Start @ 3:15. In the video clockwork mod is black/green but that's just because its an older version, the newer version is black/orange. All the steps are still the same though.
Sent from my HTC Vision using XDA Premium App
eioous said:
Note: Start @ 3:15. In the video clockwork mod is black/green but that's just because its an older version, the newer version is black/orange. All the steps are still the same though.
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
Thanks, appreciate it.
Sent from my HTC Vision using XDA App
happymfeet said:
Thanks, appreciate it.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Also keep in mind that some roms can take up to 5 minutes to load the first time. Normally (but definetely NOT always) as long as it doesn't keep reloading the boot animation, everything is fine - the rom is building your file system on your first boot.
Sent from my shiny metal G2 w/ meXdroid V3
What rom do you all think is the best? Im currently on cm 7.02 and i like it but i want to know your opinions
Sent from my HTC Vision using XDA App
Also what are
Sent from my HTC Vision using XDA App
Also what are the benefits of switching kernels? And which do you all recommend?
Sent from my HTC Vision using XDA App
if you took the time to read about kernels and what they are you would know.
but, i'm in a good mood today:
Kernels govern your cpu speed and how to scale it. Some are locked to a certain frequency set and some are made adjustable, but you have to get an app that interacts with the kernel otherwise it runs at whatever it is preset to.
SetCPU is the one I used, but I know there are plenty out there that others would recommend and swear by in a heartbeat.
mputtr said:
if you took the time to read about kernels and what they are you would know.
but, i'm in a good mood today:
Kernels govern your cpu speed and how to scale it. Some are locked to a certain frequency set and some are made adjustable, but you have to get an app that interacts with the kernel otherwise it runs at whatever it is preset to.
SetCPU is the one I used, but I know there are plenty out there that others would recommend and swear by in a heartbeat.
Click to expand...
Click to collapse
Thanks, which kernel do you have and would you recommend me getting it?
Sent from my HTC Vision using XDA App
I'm using Virtuous rom 1.02 with the advanced kernel. I clocked mine at 475-1100mhz with a low battery profile switch at 275-887 (i think).
Check your rom specific kernel to make sure it runs best for your rom. The rest is personal preference.
Sent from my Desire Z via XDA App
*sigh* Give a man a fish and he will eat all day. Teach a man to fish and he will drink beer all day.
Since you're on CyanogenMod, I recommend Pershoot's kernel (available through ROM Manager). If you're feeling bold, download Flippy's latest kernel. Since I'm running the CM-based PyroMod, Pershoot's kernel is built in.
Everytime i flash a rom do i need to flash clockwork mod recovery?
Sent from my HTC Vision using XDA App
I suggest you check out the stickies sections that has links to a bunch of very well written guides that answer all your questions. the responses you get here are going to turn ugly very fast.
Sent from my T-Mobile G2 using XDA Premium App
If you open clockwork and your current recover is the same as newest version then there is no need to reflash recovery. The only reason to reflash clockwork is if there is a newer version out.
Sent from my HTC Vision, G2, Ultra super premium awesome phone.
So I've been experiencing an odd issue intermittently. I'll be using my phone normally, and out of the blue, the touchscreen input gets flipped along the vertical centre axis in portrait mode. this flip remains when i change the phone to landscape mode (the issue itself doesn't flip). It's an odd phenomenon that disappears once I reboot, but I thought I'd record and upload for all your curiosities' sakes.
http://youtu.be/GEwfa1GYLj4
I've got the same problem but it doesn't go away when I reboot...
Can anyone help?!
Experienced the same issue. Rebooted and it was fine. Unnerving to say the least.
Have you tried a factory reset? And/or reflashing ROM
Sent from my Desire Z using xda app-developers app
I've tried rebooting, tried resetting to factory settings and now I will attempt to reflash the ROM.
From the power of google it appears that this is an issue with a lot of tablets and that it's a driver issue. Mine happened only after I replaced a faulty lcd so that would make sense. I'm still not confident on how to fix it though!
Doubt that reflashing is going to help, then. If you can get the device to run a recalibrate you may be in business.
Installing a nandroid on my WinMo TP2 there was a calibrate app in the ROM that ran in the command line before the GUI loaded up. Hopefully you can find something like that.
Sent from my Desire Z using xda app-developers app
Click to expand...
Click to collapse
CORRECTION
it was not the nand version but the version that loads from WinMO with Haret. Maybe you can look at one of these files and extract the calibrate code or find out where it came from.
Sent from my Desire Z using xda app-developers app
igor45 said:
CORRECTION
it was not the nand version but the version that loads from WinMO with Haret. Maybe you can look at one of these files and extract the calibrate code or find out where it came from.
Sent from my Desire Z using xda app-developers app
Click to expand...
Click to collapse
Thanks Igor - that's the most constructive answer I've found to the problem.
Having said that, I'm not sure I possess the neccessary skills to extract the calibrate code and secondly I still hold out hope that it's a driver issue. The reason I say that is because the old lcd was working fine in so much as left and right worked ok (just the display and colours that were ruined) and the problem only started when the new screen went in!
But I guess that still leaves me needing to extract lcd driver files.......
yw
...been googling the issue and it seems that you can get Android to force a recalibrate. IF you're rooted and handy with adb or terminal emulator.
...now that might not fix your issue BUT it might.
Google for ts_calibrate and ro.calibrate
Sent from my Desire Z using xda app-developers app
igor45 said:
yw
...been googling the issue and it seems that you can get Android to force a recalibrate. IF you're rooted and handy with adb or terminal emulator.
...now that might not fix your issue BUT it might.
Google for ts_calibrate and ro.calibrate
Sent from my Desire Z using xda app-developers app
Click to expand...
Click to collapse
Well I'm not rooted... yet! But I've been working on it (looks like I need a goldcard...) I'm not especially handy with adb but I can follow instructions and have a very small amount of common sense
So I'll try it!
Thanks again for your help man - very much appreciated.
Make sure that you use the gfree method from the wiki page for rooting. And read n re-read before you do it for a flawless and easy root.
Sent from my LG-C710h using xda app-developers app
Any luck? facing the same issue
Hi, I am a noob and wondering what is the solution to this problem?
After installing the TeamBURST ROM on my andoird the screen is working fine in the bottom half but the upper half has the y-axis flipped.
Appreciate any inputs that point me in the right direction (I just started rooting and flashing yesterday so fairly know but I do know coding).
I flashed coredroid muti vertion on my dhd. some function in advance tweak does not work, and make my dhd suspend.
1. after modify battary icon style, it stop at first screen.
2. after modify system ui, notification bar was not found.
3. unlock screen sound does not work.
4. shut down and boot up animition does not work.
Did you full wipe?
Sent from a dream.
Teichopsia said:
Did you full wipe?
Sent from a dream.
Click to expand...
Click to collapse
yes, I found all functions in extras page are not work very well. some does not work, some even susppend my phone.
for example, when I set boot animations the loading circle is running and running.
lenceliu said:
yes, I found all functions in extras page are not work very well. some does not work, some even susppend my phone.
for example, when I set boot animations the loading circle is running and running.
Click to expand...
Click to collapse
In order to use the tweaks, you must be connected to data.
By the way, there is a CoreDroid thread where you should be posting this...
Sent from my Inspire 4G using XDA
glevitan said:
In order to use the tweaks, you must be connected to data.
By the way, there is a CoreDroid thread where you should be posting this...
Sent from my Inspire 4G using XDA
Click to expand...
Click to collapse
I'd like to post this issue in the coredroid thread, but my posts less than 10, so I could only post here.
I have connected to wifi at home when I use tweak. is the data blocked by net work? for I am in China.
lenceliu said:
I'd like to post this issue in the coredroid thread, but my posts less than 10, so I could only post here.
I have connected to wifi at home when I use tweak. is the data blocked by net work? for I am in China.
Click to expand...
Click to collapse
Nope...the tweaks for me work great. Try doing a full update to see what happens
Sent from my Inspire 4G using XDA
glevitan said:
Nope...the tweaks for me work great. Try doing a full update to see what happens
Sent from my Inspire 4G using XDA
Click to expand...
Click to collapse
after press full update, the loading circle running and running, I have wating a long time, not stopped.
lenceliu said:
after press full update, the loading circle running and running, I have wating a long time, not stopped.
Click to expand...
Click to collapse
Maybe a bad connection...it is working for me.
I have just tried updating and works ok....it is kinda weird.
Sent from my Inspire 4G using XDA
************ONLY FOR CYANOGENMOD 10 9/14 nightly and newer**************
Here i present to you multiple flashable zip files to change your Hold back to kill timeout.
Do you think the stock one is too long? Then flash one with a shorter time
Dont like the short time? Flash one with longer time.
Its simple
Place your prefered delay time zip file on your sdcard.
Boot to recovery
Flash the zip.
Reboot.
Profit
Thanks so much for this. Will it work for any AOSP ROM that is based on CM10, like AOKP or Paranoid Android? This is probably the only mod I ever REALLY wanted for CM. AOKP's time out is just about right for me though. Thank you for sharing, greatly appreciated.
Sent from my SGH-T999 using xda app-developers app
sleevasteve said:
Thanks so much for this. Will it work for any AOSP ROM that is based on CM10, like AOKP or Paranoid Android? This is probably the only mod I ever REALLY wanted for CM. AOKP's time out is just about right for me though. Thank you for sharing, greatly appreciated.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
AOKP might cause a bootloop. NANDROID before flashing. Paranoid android from what i have been reading is based off of CM source, so it might work. My CM10 center clock mod worked on Paranoid android so im pretty sure this will as well.
ALSO to everyone using this, if it doesnt work, mount /system in recovery "mounts and storage" first then flash the zip. i just saw there was an error in my updater-script, nothing severe it just wont mount the system. And my upload speeds suck xD
elesbb said:
AOKP might cause a bootloop. NANDROID before flashing. Paranoid android from what i have been reading is based off of CM source, so it might work. My CM10 center clock mod worked on Paranoid android so im pretty sure this will as well.
ALSO to everyone using this, if it doesnt work, mount /system in recovery "mounts and storage" first then flash the zip. i just saw there was an error in my updater-script, nothing severe it just wont mount the system. And my upload speeds suck xD
Click to expand...
Click to collapse
Thank you for this awesome tweak man.
PS: where would I find your center clock mod?
danielrod said:
Thank you for this awesome tweak man.
PS: where would I find your center clock mod?
Click to expand...
Click to collapse
Yep, bothered the hell outta me on my GS2 and i KNEW there was a way to change it... so i set forth and found what to edit all on my own. for once google couldnt help!
Care to share where you made the change?
Hmm got UI FC's and wasn't reading anything on my SIM card after flashing this on the newest Paranoid Android.
Sent from my SGH-T999 using xda app-developers app
mbh87 said:
Care to share where you made the change?
Click to expand...
Click to collapse
It's inside the framework-res.apk. it's an XML that needs editing then recompile. Framework-res.apk/Res/values/integers.XML.
Sent from my SGH-T999 using Tapatalk 2
sleevasteve said:
Hmm got UI FC's and wasn't reading anything on my SIM card after flashing this on the newest Paranoid Android.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
What mode you running in? I wasn't sure if it would work so I guess it doesn't. Lol.
Sent from my SGH-T999 using Tapatalk 2
elesbb said:
What mode you running in? I wasn't sure if it would work so I guess it doesn't. Lol.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Tablet UI. I was also seeing weird symbols popping up in the process, like when I cleared cache and fixed permissions to see if that would fix it, the prompt at boot up said something like "upgrading applications $% of $%" but for some reason couldn't upgrade any of them, so it just started right up, and immediately gave me a UI FC.
Sent from my OGParanoid S3.
sleevasteve said:
Tablet UI. I was also seeing weird symbols popping up in the process, like when I cleared cache and fixed permissions to see if that would fix it, the prompt at boot up said something like "upgrading applications $% of $%" but for some reason couldn't upgrade any of them, so it just started right up, and immediately gave me a UI FC.
Sent from my OGParanoid S3.
Click to expand...
Click to collapse
Yeah it's not going to work then. If you could upload your framework-Res.apk to drop box or something then pm me the link to it I can mod it to whatever delay you wish..
Sent from my SGH-T999 using Tapatalk 2
elesbb said:
Yeah it's not going to work then. If you could upload your framework-Res.apk to drop box or something then pm me the link to it I can mod it to whatever delay you wish..
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Here you go: http://db.tt/iKQqsOaF Thanks a lot man. Is it a pretty easy modification? I wouldn't mind learning how to do it for future reference, if it would save you some trouble. Either way, I appreciate it!
Sent from my OGParanoid S3.
sleevasteve said:
Here you go: http://db.tt/iKQqsOaF Thanks a lot man. Is it a pretty easy modification? I wouldn't mind learning how to do it for future reference, if it would save you some trouble. Either way, I appreciate it!
Sent from my OGParanoid S3.
Click to expand...
Click to collapse
So i installed this on my Epic 4g touch(CM10) and it keeps bringing up the navigation bar on the bottom, and there is no way to disable it. Not sure why it would bring that up... Any ideas?
Bump
anyone get this to boot after updated to 4.1.2
私は神の罰です。
acejoker25000 said:
Bump
anyone get this to boot after updated to 4.1.2
私は神の罰です。
Click to expand...
Click to collapse
it wont
different framework code.
what would you like it to be at?
EDIT: PM me what you want the timeout to be. I respond to that better.
Noob "Q" ....I'm no noob but what exactly does this do? Go easy on me......
Sent from my SGH-T999 using xda premium
spodie said:
Noob "Q" ....I'm no noob but what exactly does this do? Go easy on me......
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
If u hold "back" on cm ROMs u can "kill" the app running. Some ppl prefer a shorter "long press" this will shorten that time.
I apologize for not updating this! I had just reinstalled windows after getting the ZeroAccess TrojanHorse in system32/services.exe.
And busy getting my next semester in order!
So in the near future I will have updates posted!
A new feature of cm10 is the low battery notification light. This blink rate can be edited. So if people want this edited post some led on times followed by led off times both in milliseconds.
For example 500,500
500 milliseconds on 500 milliseconds off. (This is what I use and love it) but post some ideas for different times and I'll make those edits too.
Sent from my SGH-T999 using Tapatalk 2
I know this is an old thread, but I cannot find an updated version of this. I am running CM 10.1 on my SIII and these ZIP files do not work. Is there a CM 10.1 version of this?
Thank you.
It's built into CM10. It's in the Developer Settings at the bottom.
Sent from my SGH-T999 using xda premium
This is an Extended power menu with reboot and download options when you hold the power button down.. Enjoy..
Just flash via CWM.
Only tested on UCLH2.
Remove sms frm call log mod here!
ALL DOWNLOADS BELOW!
All mods are CWM flash able..
Love the mod, but it doesn't work for me. I keep getting continuous "<app name> has stopped" (gmail, facebook, swype to name just a few) after rebooting...?
Then it locks up and keeps rebooting. I am on UCLH2.
If your on anything other than UCLH2 it may not work.. I'm using it on my daily driver...
Sent from my SGH-I927 using xda premium
dman3285 said:
If your on anything other than UCLH2 it may not work.. I'm using it on my daily driver...
Sent from my SGH-I927 using xda premium
Click to expand...
Click to collapse
I am on UCLH2, so I'm keeping my fingers crossed it was a bad download. Trying it again.
Evil Alex said:
Love the mod, but it doesn't work for me. I keep getting continuous "<app name> has stopped" (gmail, facebook, swype to name just a few) after rebooting...?
Then it locks up and keeps rebooting. I am on UCLH2.
Click to expand...
Click to collapse
Idk why.. I flashed it on mine and running great. But its on my dd I posted ... which is UCLH2..
Sent from my SGH-I927 using xda premium
I could just be talking nonsense, so forgive me if I do. Could this be a odex/deodex problem? Or something zip-align related?
I installed UCLH2 stock, using lite kernel 5.3 and rooted and debloated it myself. I also flashed the CRT off. Which makes it seem that the difference with your DD is odex/deodex or zip-align related, because I did not do anything like that.
Flashing CRT off again seems to fix the problems I previously experienced, by the way.
Correction: Flashing CRT off got it working well enough to back-up my data with Titanium back-up. Had to restore a nandroid because Play store kept failing when I tried to update apps.
Works like a charm dman. Thanks again.
Sent from my SGH-I927 using Tapatalk 2
Evil Alex said:
I could just be talking nonsense, so forgive me if I do. Could this be a odex/deodex problem? Or something zip-align related?
I installed UCLH2 stock, using lite kernel 5.3 and rooted and debloated it myself. I also flashed the CRT off. Which makes it seem that the difference with your DD is odex/deodex or zip-align related, because I did not do anything like that.
Flashing CRT off again seems to fix the problems I previously experienced, by the way.
Correction: Flashing CRT off got it working well enough to back-up my data with Titanium back-up. Had to restore a nandroid because Play store kept failing when I tried to update apps.
Click to expand...
Click to collapse
Yes.. my dd is deodexed. If yours is still odexed then that is why it was freezing and rebooting. This includes the android.policy.jar which is deodexed..
Sent from my SGH-I927 using xda premium
I had to take time away from looking at code for cm10 and 9 for a bit and bring y'all some simple mods..lol..
Sent from my SGH-I927 using xda premium
Nothing wrong with that. I kinda like the stock rom and would be awesome with a few mods like the extended power menu you just added. That was one of things I missed from custom roms. Once again. Thanks for everything you do.
Sent from my SGH-I927 using Tapatalk 2
Dman, hope you don't mind but I added (screen off, long press volume skip track) to your EPM. BTW it works great on literom4. Please add to OP if you would like. Many apologies if you didn't like me editing your work, ill take it down if there's any problems. Thanks!
http://db.tt/yTZ3RoDg
EDIT: Thanks to Dman for the EPM
https://www.dropbox.com/s/3h69z7g1u1348ki/i927_EPM_ICS_LPVST_NewIcon_tether.zip (EPM, New Icons, Long Press Volume Skip Track, Tethering Fix)
https://www.dropbox.com/s/f0d2i8krtr6hok2/i927_EPM_ICS_LPVST_Tethering.zip (EPM, Long Press Volume Skip Track, Tethering Fix)
All are working on Literom4
Sent from my SGH-I927 using xda premium
That's cool with me bro.. nice work..
Sent from my SGH-I927 using xda premium
I'm currently running dman's uclj3. Can I flash this? Thanks!
Sent from my SGH-I927 using Tapatalk 2
luquiyahni said:
I'm currently running dman's uclj3. Can I flash this? Thanks!
Sent from my SGH-I927 using Tapatalk 2
Click to expand...
Click to collapse
Haha oops edited for dmans rom.
This should work. No promises, that's why we are testers, taking chances and if it fails, we just go back to our original phone state using a backup we made prior. Don't wanna brick(dunno if that is possible cuz this phone is beautiful) then make sure you backup in recovery
I gave it a go on UCLJ3 earlier, but its not working for me. Holding the power button does something cos I can feel it register, but no screen pops up, then about ten second later it crashes out
It also seems to have stolen my weather widget off my home screen for some reason too.
Pablo 13 said:
I gave it a go on UCLJ3 earlier, but its not working for me. Holding the power button does something cos I can feel it register, but no screen pops up, then about ten second later it crashes out
It also seems to have stolen my weather widget off my home screen for some reason too.
Click to expand...
Click to collapse
That's because its not compatible with UCLJ3. As this was built with UCLH2.. as stated in OP
Sent from my SGH-I927 using xda premium
I knew that, but I also knew people would ask the question if it would work, so thought I'd test for myself
It's working for me on the new update ! Although the reboot download not working ! It reboots the phone and just shows a android man quoting "download" not the normal download mode!
Sent from my SGH-I927 using Tapatalk 2
dbrannon79 said:
It's working for me on the new update ! Although the reboot download not working ! It reboots the phone and just shows a android man quoting "download" not the normal download mode!
Sent from my SGH-I927 using Tapatalk 2
Click to expand...
Click to collapse
Then your wrong.. its not working..
Sent from my SGH-I927 using xda premium
dman3285 said:
Then your wrong.. its not working..
Sent from my SGH-I927 using xda premium
Click to expand...
Click to collapse
My apologies if I have offended you with my comment! I haven't had any trouble with your mod!
I recently flashed the one enewman17 added the tethering fix to, noticed the icon changes. hadn't needed to reboot download mode until yesterday! that's the only part I haven't tested! I've just been working and haven't had a chance to mention it here!
the download mode part wasn't a big deal to me since I hardly use it!