Develop Bugs

Harder silicone case

I'm curious if there is a stiffer/stronger silicone case out there. I had a hard silicone case for my ipod touch and miss it. The htc silicone case is just to flimsy and I'm not wanting a hard case never had any luck with them
Sent from my EVO using Tapatalk

What you want is a TPU case. It's a different material than silicon, somewhat stiffer and tighter fitting (maybe a bit less shock absorbent?), but pretty much superior in every respect imo... It's still a soft case tho, you still stretch it around the EVO to fit it in and whatnot, and you could bend it if you wanted (only difference is it snaps back to it's original shape much quicker than silicon).
It seems to have more grip on your hand but it slides out of your pocket a lot easier, a LOT easier, and unlike silicon cases it attracts almost no dust and lint whatsoever! My HTC/OEM silicon case (bought at the Sprint store) attracted so much lint and crap in my pocket that within a day of cleaning it all up I'd have this crusty line of crap all around the edges, it was pretty irritating. None of that w/my TPU case, at all!
The TPU cases also feel a lot slimmer on your hand even tho they're not that much thinner than the silicon one, they're still thick enough so that the camera is recessed below it and fully protected (most of them are anyway, there's some thinner ones)... I guess part of the reason they feel more svelte is that the edges are more rounded off and not as squre-ish as the HTC silicon one.
Button press feel is also much better w/these, probably because of the tighter fit, they actually improve the handling of the power button if you ask me. The side edges of these cases don't move at all unless you pull on it tightly, totally different feel compared to the silicon ones which loosen up and from just swiping your finger across the screen you can end up stretching the edge out.
In short, they're just superior in every way, just get one and you'll thank me later. All you have to do is choose one of the different ones out there based on aesthetics...

Amzer sells one w/an Argyle pattern on the back, that's what I've got right now, it's available on Amazon and off Amzer's site for around the same price ($9-10), it's semi-translucent and the pattern is actually a lot more subdued and doesn't stand out nearly as much as you'd think from looking at the online pics. I actually like the pattern, if anything I'd say the shade of the skin isn't quite smoked/black, it has a slight hint of amber/brown...
That's the only thing that bothers me about it. I'm gonna be ordering a plain black one along w/a red one from DCMugen on Ebay, he's selling some made by Epik that look to be the exact same thing w/o the Argyle pattern, and they're cheaper to boot ($3.50, or $6.50 for two). I can get you a link if you can't find 'em... I think they have 'em in blue and clear and a few other colors too.
Just don't fall for the cheap off-brand Argyle ones on Ebay, you can tell them apart easily because unlike the two I've mentioned those have one large cutout for the camera/LED/speaker, whereas these other ones have individual cutouts and from what I've read they're a bit thicker. Those other Ebay ones also have a large silly cutout for the fingernail hole on the battery lid that you use to pry it off, seems like a goof on the mold/design.
If you don't care for the Argyle pattern on the Amzer one I'd get the Epik ones from DCMugen, I think the colors/tint on those are closer to the photos. Here's a link to the red one, you can click on the seller for the other colors and the package pricing for two or whatever.
If you're not into the translucent look of either of those TPU cases you can always grab the matte black one at www.evocases.net There's a thread for those right here at XDA where misticjeff has even thrown in a $1 code discount for XDA members. The sides/front are still glossy (perhaps a bit glossier than the translucent ones, judging by the photos), back's matte. The frost one is no longer available.
On the thread about those some people were complaining about the feel of the power button, seems it's not as great as the Amzer/Epik ones, some people resorted to sticking a lil' bit of tape in between to make it easier to press... One thing the evocases.net does have going for it is the slightly raised ring around the camera, which I guess might protect it more in the long run... Even tho they're all thick enough that the lens is recessed (as well as the screen obviously).
My 2 cents, hope it helps... I'm loving the feel of these TPU cases tho, I'll probably never get a silicon case for a phone again.

Whew, that second post got pretty long... A picture or two would've made it easier to explain I guess. Lemme know if you're interested in the Argyle one and I can grab my camera and post some pics of how it really looks, there doesn't seem to be many pictures out there of the actual case ON the phone (for either of them really).
I was gonna wait 'till I had the Epik ones so I could photograph them all side by side but I can take pics of the Amzer Argyle one in advance and post 'em up. Like I said, I actually dig the Argyle pattern because it's pretty subdued, it's more of an etch or a shade (it actually feels like an etch on the inside of the case), rather than a print. The only thing that bothers me about it is the overall shade/tint.
I probably wouldn't even be ordering the Epik one if I wasn't also ordering some of those clear battery doors that are about to go on sale... I think those plain Epik cases w/the clear battery door will look very slick.

Best buy might have what you are looking for. My only gripe is the buttons feel hard to push. But give it a shot (most BB will let you try on the case) it might be what you are looking for.

Seidio Innocase Active Cased - Limited Edition
After looking around the net for some time I bought the Seido Innocase Active Limited Edition.
Can't post a link but search Amazon for the title in my thread.
It's a semi-hard silicon cover with a siliconized hard plastic that exo-skeleton. Perfect combo in my opinion. My one complaint is that the edges on the hard plastic piece have the siliconized coating peeling off a little but I think I may have gotten a defective unit as I haven't seen anyone else complaining about it yet.
Also got the ClearTouch screen cover anti-glare version. I've had this cover on a few phones and it's also the best for reducing glare and fingerprints while maintaining clarity. Kinda hard to install without getting dust underneath but once you get it on right it looks and feels great. ClearTouch is sold by boxwave and is on Amazon.

Hybrid Flexi Skin Cover
Has anyone tried the Hybrid Flexi Skin cover from Daydeal.com? I'm also looking for a tighter case than my OEM silicone skin I got from Sprint. I just don't like the way the sides become flimsy and flaps off the phone when I swipe my screen. I'm looking at this case:
Hybrid Flexi Skin Cover for HTC EVO 4G, Honeycomb (Smoke & Clear)
Hybrid Flexi Skin Cover for HTC EVO 4G is a combination back cover consisting of a semi-hard, semi-soft Thermoplastic Polyurethane (TPU) edge with a smooth hard back.
* Protects the side edges and back of your EVO 4G
* Hybrid cover consisting of a semi-hard, semi-soft TPU edge and a smooth hard back
* Stylish glossy TPU edge provides shock-absorbing protection
* Lightweight TPU is resistant to taring, stretching and deforming
* Compatible with HTC EVO 4G
Sorry, I'm a newbie and can't post links, yet. I don't know if the TPU edges would solve the flapping problem, since it's supposed to be firmer & tighter. Any input would be appreciated. Thanks.

Hiway said:
Has anyone tried the Hybrid Flexi Skin cover from Daydeal.com? I'm also looking for a tighter case than my OEM silicone skin I got from Sprint. I just don't like the way the sides become flimsy and flaps off the phone when I swipe my screen. I'm looking at this case:
Hybrid Flexi Skin Cover for HTC EVO 4G, Honeycomb (Smoke & Clear)
Hybrid Flexi Skin Cover for HTC EVO 4G is a combination back cover consisting of a semi-hard, semi-soft Thermoplastic Polyurethane (TPU) edge with a smooth hard back.
...
Sorry, I'm a newbie and can't post links, yet. I don't know if the TPU edges would solve the flapping problem, since it's supposed to be firmer & tighter. Any input would be appreciated. Thanks.
Click to expand...
Click to collapse
As I said in my previous post, TPU rocks as a material for cases/skins... I don't blame ya for skipping right over it tho.
TPU >>>>>> silicon
TPU doesn't attract dust at all, it's much tighter/rigid so the side edges don't flop out at all, but it's still got plenty of give (so it'll absorb a fall/bump), you could bend 'em in half if you wanted... Only difference is it'll snap back into form in a second unlike silicon which will probably just bounce around in an arc.
TPU also seems just as grippy on your hand, if not more so, but it slides in and out of pockets way way easier, and most of the TPU cases I've seen feel way more svelte in the hand than the OEM/HTC silicon scene... Probably in part because they're a tad thinner, probably also because the edges are more rounded off and not as blocky. Physically I'm sure it isn't a huge difference, but it sure feels like it.
This thread has some further discussion on TPU cases, it's really hard to judge them based on pictures alone, I was very pleasantly surprised with mine.

So I tried googling the title you posted and came up with this, only place I could find it at. Looks pretty interesting, seems the back is hard plastic and the edges are TPU. If you dig that honeycomb pattern I'd say go for it...
Altho if it's actual plastic it might get scratched up over time Looks like it's also clear/translucent, clear plastic usually shows every single flaw... A plain TPU case wouldn't have that issue. I'm just not seeing the advantage over 100% TPU, which are also like $3.50 vs $14 (look for DCMugen's Epik/TPU cases on Ebay).
OTOH that red back + black edges on the video in the link I pasted before looks pretty sweet... The rest look kinda gaudy imo ('cept for the all black) but red/black looks really different, I like it.

P.S. This is the Honeycomb (Smoke & Red) combination I was alluding to... There's also Honeycomb (Smoke & Smoke) and plain Black & Smoke (no honeycomb pattern, solid black sides). The red is the most distinct imo, those are all probably better in the long run than the clear back (less forgiving).

Jayr00 said:
Kinda hard to install without getting dust underneath but once you get it on right it looks and feels great. ClearTouch is sold by boxwave and is on Amazon.
Click to expand...
Click to collapse
Tip for the next time you gotta install a screen protector and its the hard type: get some scotch tape, put it on the non adhesive side of the screen protector so you can peel it back without touching anything, and then grab another piece of tape and start taping the dust out of the screen or adhesive side of the protector and you'll be dust free in no time. Friends came over cuz they all needed new protectors and i did 4 phones in 20 minutes.

Hybrid Flexi Case
I got my new case today....went with the Smoke & Smoke combo. This case is awesome, I HIGHLY recommend it. the sides don't flap and it has a really tight fit and seems really durable. Got it off of EBay for about $8.50 ($4.50 for case + $4.00 shipping/handling) from Daydeal as opposed to going to their site and paying $13.99.

Impulses said:
P.S. This is the Honeycomb (Smoke & Red) combination I was alluding to... There's also Honeycomb (Smoke & Smoke) and plain Black & Smoke (no honeycomb pattern, solid black sides). The red is the most distinct imo, those are all probably better in the long run than the clear back (less forgiving).
Click to expand...
Click to collapse
I went with the smoke on smoke honeycomb case and got it today. It's darker so I think it'll hide any scratching that my occur on the backing. I agree with you on the clear backs when I first saw them, but the back seems scratch resistant (only time will tell)

Hiway said:
I got my new case today....went with the Smoke & Smoke combo. This case is awesome, I HIGHLY recommend it. the sides don't flap and it has a really tight fit and seems really durable. Got it off of EBay for about $8.50 ($4.50 for case + $4.00 shipping/handling) from Daydeal as opposed to going to their site and paying $13.99.
Click to expand...
Click to collapse
If possible can you please post pics? Im interested in this case but have only seen Daydeal's review on it.

Help me choose a SGS2 case+protector

Hi guys,
When I look at the forum, it's like advertisements of new products which doesn't tell me a lot. So can you please recommend me:
A case that:
doesn't require me to open some part to access the screen
protects the phone well against drops
is comfortable to hold and touch (my fingers won't get itchy etc.)
And a screen protector that:
protects without distorting the image quality and responsiveness of the screen
doesn't leave bubbles inside (I hate the bubbles) or fingerprints outside
is a little slippery so it won't be a hard job for me to move fingers on the screen
THANKS IN ADVANCE FELLAS!

There is a hybrid case, just search hybrid case sgs2 in amazon,
I'm perfectly happy with that.
Downsides:
- not so slim anymore
- more weight
But my phone feels safe
And I'd suggest the Mumbi-screen protectors,
but you'll still some have fingerprints.
But once applied right (not easy btw )
they fit perfectly
Muta

you can look at the case-mate tough or the otterbox commuter, they both rock.
i bought the case-mate a few days ago, waiting untill it arrives

I also recommend the cases that other posters have, for a screen protector look no further than this.
http://www.amazon.com/SGP-Samsung-Galaxy-Protector-Oleophobic/dp/B0056C3JT6

Ive just recieved a Zenus Air Jacket looks sleek and smart, they do a range of colours, and it comes with a screen protector too, although i tried to fit mine and some dust came out of nowhere and went onto my screen so i had to bin it , hopefully the gorilla glass will protect instead
http://www.mobilefun.co.uk/zenus-skin-air-jacket-series-for-samsung-galaxy-s2-i9100-white-p29786.htm

I have a transparent Casemate Barely There.
It's a bit rigid but I think is the thinnest case on sale.
The transparent one gives to the phone a nice shiny look.
Suggested

I bought a hardcase, but i had the problem with the echo voice !
i heard my own voice twice !
is the problem fixed now?

In my personal opinion i like otterbox for SGS2, fits well, it has a metal cover for back side and plastic covers for usb port and earphones, i have one.
Enviado desde mi Samsung Galaxy S II

perso
Personally, I bought a pack screen protector + white case on ebay.
You can search on ebay :
LOT 7en1 Housse Etui Coque Rigide/FILMS Protecteur Pour Samsung Galaxy S2 i9100
sold by citephone

I just tried different case.
I prefer hard cover.
I try
1) Phoenix tough case: i broke upper corner, rubber come out after a bit of time
Vote: 3/10
Price around 15€
2) Samsung Original Mesh Vent case: Too sensitive and since have hole the dust come in and leave and put it many times to clean i broke the upper corner. In any case it offer a very low protection
Vote 5.5/10
Price around 18€
3)Tpu soft cover gel from ebay: it is not so soft but offer a better protection than other but for it's material attire too many dust on the border. It offer a good grip
Price 5€
Vote 6.5/10 (for now)
At end i buy also Case-Mate Tough that have 2 layer protection but it has not arrived.
Arrived
Perfect case optimal protection and grip. 2 thing. Inside silicon collect dust and dont put while phone is on because it press power button to reboot

Incipio NGP case. Martin Fields screen protector.

A lot of people are recommending products that does not stand out. I prefer to make my phone special so it stands out when I take it out. I like sleek , high tech looking things and thats what this setup is about:
I am currently using metal black battery cover:
http://forum.xda-developers.com/showthread.php?t=1263780
with real aluminum black phone case: (see akiba slider or SZLF slider)
http://forum.xda-developers.com/showthread.php?t=1263780
(SZLF or china made version on ebay for $30, search i9100 metal case)
with ultra optics
http://forum.xda-developers.com/showthread.php?t=1263780
result is a Sleek phone with a premium metal feel to it. The ultra optics cancels out fingerprints while maintaining good optical clarity. (you may need to clean it still every 1 week or so like any protector)
If you are daring, remove the case and just replace the housing for 15$ on ebay every time it gets too scratched.

1xinfusion said:
If you are daring, remove the case and just replace the housing for 15$ on ebay every time it gets too scratched.
Click to expand...
Click to collapse
I got the Incipio NGP case as well and it is pretty sweet--has a great feel and is thin, although the back is a little bit too smooth but I still like it.
That is a good idea on the housing. I might try a white housing.
What is your opinion on a screen protector? I don't like how it adds a layer and changes the feel--and besides, the SGS2 has gorilla glass.

Otterbox COMMUTER vs Case Mate TOUGH

For those interested, here is my OTTERBOX COMMUTER vs CASE MATE TOUGH comparison. I now own both of these cases and found some interesting differences.
OTTERBOX COMMUTER
+ Very solid case 9/10
+ Rubber has extra cushioning bumpers on corners to better protect against drops
+ Cutouts also have secure plugs to prevent dust and water from intrusion
+ top, bottom and sides have hard plastic protection over the rubber making a more secure fit all round.
+ Rubber is of a higher quality 8/10
- Sound quality of speaker phone is slightly affected by the raised plastic that sits closely around the speaker. Sound comes out a little louder and sharper but still sounds fine.
- Case can be quite difficult to remove because the plastic cover sits over all four sides and is very tight
- Plastic cover surface is very smooth and nicely designed but will be slippery with oily or sweaty hands
- Screen protector cutout is a little short near the top where the earphone is compared to other screen protectors I've used, but quality is fine, average.
- headphone and charging ports are a little smaller than I'd like but should fit most accessories.
- ON and VOLUME buttons are a bit difficult to press, quite like most TPU cases
- Having plastic covering on the front sides, it can be easily knocked off a table when sitting face-down, and back down is even worse.
CASE MATE TOUGH
+ Very solid case 8/10
+ headphone and earphone ports are a perfectly cut to fit all brands.
+ Very easy to remove with only sides covered by plastic cover
+ Plastic material has excellent grip on sides and back making it much more secure in the hand.
+ Plastic is less likely to show scratches over time
+ Quite easy to remove with only the sides cover the the plastic cover.
+ ON and VOLUME buttons are very easy and nice to press, with perfect feedback, almost a little 'too' easy actually.
+ The entire front is rubber, so when sitting face-down, it does not move and has a secure grip on surfaces, less likely to be knocked of a table etc
- Because the plastic cover only sits over the sides, the top and bottom have the rubber exposed and it could catch on things, such as removing from a tight pocket. not a huge deal in use.
- headphone and charging ports are open and exposed.
- rubber is a little thinner than the Otterbox's and more stretchy/flexible, though may not be a big deal in use/drops.
So in conclusion, I really like both cases for different reasons. At first impressions, the Commuter appears to be the better case due to it's port covers, more secure fit with plastic covering all sides and the extra protection given to the corners of the case.....BUT....
....the Tough case just feel better in the hand, more secure. While both are almost identical in size, thickness and weight, the Tough has a nicely textured hard surface (that looks like rubber in photos) and this is what I would call 'active' protection, compared to the passive protection on the Otterbox. What I mean is that the Commuter is more likely to slip out of the hand, but be better against drops, and the Tough case is less likely to slip out of your hands, but make be less effective against drops. Also with the Tough case having rubber all the way around on the front, it's rock solid when sitting face down on a table surface and less likely to be knocked off.
Also, if you like to change your case on a fairly regular basis, the Otterbox is not an easy case to remove. Not that difficult, but the Tough is about 3x easier. This is a big deal for me, and combined with the nice secure feel, the Case Mate Tough is the preferred case for me as a daily wearer. If there are days where I feel I may need some extra protection against, say rain, I may be a little more inclined to throw on the Otterbox Commuter.
Either way you can't go wrong as both are great cases.

leicashot, any chance of any piccies with the Galaxy in the commuter case ? I'm thinking of getting one for my shiny new precious !
Also, do you have a car holder of any type that fits with the commuter on it ?

Do provide pics of these two cases if possible...

Interesting! I always wanted to compared them, but I dont wanna buy those cases because I know i would never use them after.

abhifusion said:
Do provide pics of these two cases if possible...
Click to expand...
Click to collapse
Will try take some pics later today....

do these cases come with screen protectors or no?

My tough case did not come with a screen protector which is fine by me since I hate them. Bout all I can say is that I had the tough case on my sgs2 both of which I got when they came out (each respectively, the case followed by a week or two) and have no complaints about it. Phone lived through a few drops one of which was standing in the back of a pickup to unload stuff and it fell out of my pocket onto the pavement, some 6 or 7 feet I would guess. The phone was fine and the case showed no mark whatsoever. I have not had any issue with the rubber on the ends sticking to anything and it does not pick up lint. The phone is easy to get in and out of the case but still completely secure in it and wont come out unless you take it out. The case has no movement on the phone and feels solid. The texture on the case is just about perfect for grip and more has an undefineable "good" feel. The ports and all openings line up perfectly with the headphone and microusb ports being opened up a little extra to let larger based headphone jacks or usb cables fully insert to their base. Something I appreciate because I have some headphones that sometimes wont go in without trimming the case.
To be honest I only see one real downside to this case and its going to come down to preference. If you want your phone as slim as possible this case isn't for you. The lip around the top is probably near two millimeter by itself and while it fits like a glove you have the width of both the rubber and case across the bottom and sides. To someone like me its a win because I think modern phones are too thin and I would want to do something to bulk them up even if I didn't need the protection.
I considered the otterbox to try something new but did not. I have no beef with it and it seems like folks that have them like them but for me it was hard to get away from something I knew worked great and for which I had no gripes.

I have a Case Mate tough too and i realy like, i used it on all my phones i had.
Here are some pics http://www.case-mate.com/Samsung-Galaxy-S-III-Cases/Case-Mate-Samsung-Galaxy-S3-Tough-Cases.asp.
Never had the Otterbox but it looks clunkier and bigger, the Case Mate is a bit more elegant and has a good grip and feel.

Do any owners of either case use them in car holders at all ? If so any chance of pics in the car holder ? Also, does the case interfere with the operation of NFC at all ?

Hey guys,
I have the CaseMate Though since last week when i got my S3.
Before that I had the Otterbox Commuter on my DHD and I must say, I like the CaseMate much better. It may does not protect the ports as already said, but it does feel very good in my hand.
Car mounting is not a problem for me, I have an universal holder in which it will fit in easily

leicashot said:
Don't mean to be negative but I got the case today and it feels great except I'll be returning it. Why? Because the top front and bottom front of the case don't have hard plastic holding down the rubber lips, so they get caught and stretch in the pocket when retrieving. This over time may cause the rubber to tear or stretch too much cause it's very elastic and thin.
Whereas the Otterbox Commuter has the plastic sides cover top, bottom and both sides so that no rubber is loose, but held down tight. A much better product from my experience in the past and looking forward to having it when it arrives in the next week or so. This review will cover what I was talking about. http://www.youtube.com/watch?v=21Dxcyfm3Vg
UPDATE: See my review on both cases here. http://forum.xda-developers.com/showthread.php?p=27997216#post27997216
Click to expand...
Click to collapse
I read a negative point about Tough case from you in another thread. Didn't see it mentioned here.
So is this problem a big thing or can i go with Tough case?

I have the Otterbox Commuter case on my S3 and I love it!! I had a defender case on my Tbolt and it added weight and size to it. I did not like it for that reason. The commuter case for the S3 fits just right and doesnt take away from the size that much. I have to believe this is a must have case for some protection for your phone.

anyone know if the case mate tough fit the active holster because it does appear to be the same size as the commuter

What are the dimensions of the case mate tough.

Nice review! Have u ever used the incipio silicrylic? seems very much comparable to the Case-Mate Tough and I dont know which one to choose.. Heres a link http://www.amazon.com/Incipio-SA-302-Silicrylic-Silicone-Samsung/dp/B0085VAP38/ref=sr_1_2?s=wireless&ie=UTF8&qid=1353870767&sr=1-2&keywords=incipio+s3

Hi, just got my casemate tough for the galaxy s4. I've been using one with my galaxy s3 and am very pleasedwith it but, unfortunately the one for the s4 is a bit disappointing. Although the look is the same the lip around the screen isn't as deep and the rubber doesn't come over the metal border fully. The volume button only has the rubber over it without the plastic surrounding which makes it feel fragile. I'll be returning the case and have ordered an otterbox commuter, although I would've preferred the casemate. Hope it's helpful.

I have 2 brand new Otterbox Defender series warranty replacements for sale, a Grey on white and Black on black with clip holsters for sale. Looking to sell both for cheap in a bundle. Shoot me a PM if your interested.
Sent from my SM-N900P using Tapatalk 2

[REVIEW][GS2 T989] Diztronic Matte Back Black *Rev 2* TPU Case

Diztronic Samsung Galaxy S2 T989 Matte Back Black *Rev 2* TPU Case Review
I have had this case for about a month now and I am writing this review as there doesn't appear to be any particular review of the case for our phone. *to view a larger image just click on the thumbnail*
Delivery/Packaging |9/10| & Pricing |8/10| :
I ordered the case from the Diztronic website so it was delivered from their main facilities. I live outside of the US so I had to choose the "USPS First Class Mail" method which was $2.50 CDN. The package arrived in my mail box close to 2 weeks, which was a longer wait than I hoped for but it was noted that international shipping would take 7-30 days. The package itself came in a grey plastic envelope with the shipping information labelled on it. Inside the package was the case wrapped in a clear plastic with the logo label and a cut piece of cardboard that was placed to help retain the shape of the envelope. When taking the case out of the plastic, there is an image of the phone printed on a piece of cardboard within the case to show what the case will look like on the phone. The packaging the case came in was more than secure enough to provide protection when being shipped (there were no tears or faults in the packaging at all).
The pricing and availability of the case will vary at the time you read this. Although, the cost for the case itself was a decent $10 for what you get, by far not the most affordable however. I used the discount code "XDA" to get an extra $0.99 off the order which was convenient. It would have been nice if they included a screen protector like they do with some of the other phone cases they offer.
Installation & Fit |10/10| :
Putting the T989 in to the case is extremely easy since it's a one piece, TPU style case, so there are no tools or attachments needed. My approach in putting on the case was by starting off with placing the top of the phone (where the headphone jack is) in the case since the top of the case has 'lip' that goes slightly over the top bezel compared to the bottom. Then I just pushed in the rest of the phone in the case making sure the sides of the case did not catch the buttons, which was not a problem at all, right until the bottom of the phone was securely in place.
The case itself is extremely slim and the fit is almost close to perfect, every side of the case is snug to the phone, however, note that I am using the case on top of the body skin I reviewed here. So for anyone who was wondering, yes, this case will work with a body skin applied on the phone. The case is so firm in fact that even the left and right sides of the case do not move as easily when sliding your fingers towards them moving outwards , however, this may change in time... I just haven't experienced it as of yet.
Build Quality |10/10| :
This particular case has a very premium feel, there is a certain weight added to the phone with the case on. It also may have to due with the matte back option I chose for the case. The feel of the matte texture finish is almost identical to the feel of the Razer gaming mouse I have (if you have used a Razer mouse, you would understand what I mean). It has a very paper-like characteristic yet is soft to touch. The matte finish is carried from the outside of the phone to the inside as well which adds to the overall quality of the case (it is also provides a softer surface for the phone compared to the raw plastic). The benefits of having the matte finish is that it is less prone to fingerprints, the downside is that if the matte part gets scratched it will be very noticeable. The matte finish is smooth making it easy to take the phone out of the pocket.
I'd like to mention however, the matte finish is not applied to the outer border/rim of the case as that part is left glossy. It appears as if the case was made with two pieces which may be the instance since the separation between the glossy/matte finish is symmetrical around the circumference of the case. I believe this was done because it is the area that would get worn out the quickest and it probably was easier to manufacture that way. In my opinion, I think the glossy rim for the case was a great idea, it definitely looks aesthetically better for the whole front of the phone. Also, the glossy finish offers a better grip to the case, since the matte finish may be too smooth to grip at times.
Now, when it comes to the cut-outs of the case, they are placed accordingly for every necessary part of the phone. The cutouts for the power button/volume-rocker is perfectly placed and provides a substantial amount of room which provide easy access for any finger size. The cutouts for the headphone jack and micro-USB port are evenly spaced out which leaves enough room for anything that you would like to connect. The headphone jack of my Shure earbuds which is somewhat wide, fit without a problem, at the same time the stock USB cable that came with the phone fits just as expected with the case on (I have provided pictures above with the cables attached below) . Regarding the USB cut-out it was noted that in revision 2 of the case they have enlarged the cutout to leave room for the bottom microphone (I have not experienced any call echo with the case on, even on the stock T989 ROM). The cutout for the top microphone is also precisely placed, there are no issues.
The back cutouts for the case are just as accurate as the cutouts on the side of the case. The camera cut-out does not obstruct the lens of the camera or the LED flash at all. I particularly like how close the cut-out for the rear speaker is, it's nicely placed at the same time it does not reduce the volume produced from the speaker. I'd also like to mention that the case somewhat lifts up the rear of the phone around the speaker area which lets some sound still leak out when the back of the phone is faced down. Lastly, for anyone who is wondering about the reception quality when using this case, I have found no issues during use which is expected since TPU isn't a material that interferes with radio signals.
Protection Quality |8/10| :
The most important part of any case is the protection it offers and this case in my opinion provides more than satisfactory protection for day to day use. Due to its slimness it may not have the drop protection that cases like the Otterbox offer, yet, the TPU material used is particularly good at protecting the phone from average height drops such as from a computer table to stomach height. The case is thick enough to protect the camera area as it lifts the glass part off the surface, this also applies to the front glass of the phone as the rim of the case provides about 1 mm of clearance when setting the phone down on it's front. The rim of the case is formed perfectly over the edge of the front right before the glass, so if you have a screen protector it will not lifted/bubble up.As for scratch protection goes, the case definitely prevents scratches to the back housing of the phone. The disadvantage with this case is that since there are cut-outs for the buttons, dust/sand particles can enter sides of the case which can cause scratches to the bezel of the phone (which is the major reason I bought a body skin to be used right underneath the case). If you are worried about scratches on the phone, the combination of the body skin with this case offers amazing scratch protection if you are willing to spend the money for it.
Overall |9/10| :
If you are looking for a sleek looking slim case to protect your T989, the Diztronic TPU case is definitely a great option! The build quality of this case is notably impressive and there's no questioning to why this case is somewhat pricey compared to the TPU alternatives on Ebay. You definitely get a premium case, particularly with its Matte back finish. As for protection goes, the case offers the best balance between protection and keeping the slim profile of the T989, the TPU qualities with this case is more than enough in protecting your phone from everyday drops. Overall, the Diztronic Matte Back Black *Rev 2* TPU case is definitely a product I recommend for any GS2 T989 user, there are enough noteworthy features that this case offers for you to get one if looking for a case.

I know the review is long, please read what's written under "Overall" if you do not want to read everything or just don't read it at all, lol. Hope this review will be of some use to people. Cheers!

I can agree with everything said here about this case. It's really nice and extremely comfortable! It's the first case I got a while back and it's the last one I'll need.
Great, authentic review

I also have this case and I agree with everything said here. It is a really good case.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

I bought about three cases before this'd one and love it!! Great review and well said I love mine
Sent from my Nexus 7 using XDA Premium HD app

Thanks for this. Diztronic has my heart when it comes to protecting my phone.
Didn't know how it would look on a black S2 though until now. So thank you again.
Sent from my SGH-T989 using Tapatalk 2

would you guys prefer the d30 case or this one?

mycars12 said:
would you guys prefer the d30 case or this one?
Click to expand...
Click to collapse
I've been running d30 for about a year and 1 month and the case isn't dirty or yellow (it's white) and it still stands today with the many falls
Sent from my 4.2.1 xLoud Paranoid Grouper with Motley Kernel

I have the same case and its the best case I have ever owned. I drop my phone quite a bit and phone/case still look perfect. Fits great on device, and has a nice non slippery feel that does not attract dust. My wife has the pink version and its the same quality but a little slicker, she really likes it too.

diztronic
I have the matte black diz rev 2. I bought my t989 at tmobile store and wanted titanium but was told they aren't made anymore. Now this was from corp office. So I got white. The diz covers it nice black with a little white showing fitting for ICS . I really don't care if it scratches it. I May buy New housing anyway!

Best Case/Cover/Shell

Just want to know from you guys experience.
Who makes the best cases/covers/shells for samsung?
And if any of you are using cases/shells/covers, which are you using? Would you recomend?
What are your experiences?
I'm not really a fan of the flipcases
Thanks

If you are on a high budget, you could look at the Impact-absorbing Tech21 cases.
Those are of high build quality.

I recently got a casemate tough case for my sgs4 mini and I am very pleased with it, both handling-wise and in terms of general ruggedness.
Did anyone get a screen protector? I loved the exim ultraprotect on my old nokia, but the s4 mini is my first phone with a capacitive touch screen and I am unsure if a screen protector will hurt its responsiveness.

I got a screen protector applied the moment I unpackaged my phone at the shop. They applied a Screenguard branded clear (non-matte) screen protector and responsiveness hasn't been an issue in the 4 weeks I've had the phone.
This screen protector ($4) is a fingerprint magnet though, but it has perfect cut-outs for the light, proximity sensors and front - facing camera as well as the home button.

Case
I just bought a Belkin case named "Grip Sheer Matte" in a blackish-brownish transparent tone for the black S4m (ha! SAM!).
It was 12€ in an electronics store here in .de but you can probably get it cheaper online (see link).
I like the soft and smooth feel. The case fits quite good and protects the back and all edges. The ports and buttons are accessible and the holes on the back for camera and speaker are in the right places.
Cheers,
CS

I bought the original Samsung Flip Cover with view... I think its the best but it was not cheap.

Just got a Samsung Flip Cover without view (which replaces the back cover). After using a ROCK flip case, a MERCURY Fancy Diary flip case and a simple metallic-red non-flip case, the Samsung Flip Cover seems to do its job best. The cover is heavy enough to hold itself down when the phone is facing up, and folds behind nicely such that it is comfortable to hold.

What's the point of having such a small metal bumper? In case of a drop it won't absorb any energy ...

Its probably to protect the original metal rim against scratches and bumps. Good for maintaining the resale value! (The screen protector will protect the front, and the back cover is replaceable)

damn.. i want those pretty and sturdy cases from otterbox, uag, spigen etc

Does the S-View cover also protect the edges?
After almost 2 months I notice that I already have a couple of bumps right on the edge of the screen. I don't want to buy a thick shell since I bought the Mini exactly because of the sleaziness and the S-view looks quite nice..

charliebigpot said:
Does the S-View cover also protect the edges?
After almost 2 months I notice that I already have a couple of bumps right on the edge of the screen. I don't want to buy a thick shell since I bought the Mini exactly because of the sleaziness and the S-view looks quite nice..
Click to expand...
Click to collapse
No. The S-View cover replaces your back cover of the phone. Thus it only protects the back. The sides are exposed except for the left side of the phone where the cover flips over the phone.

Whosat said:
No. The S-View cover replaces your back cover of the phone. Thus it only protects the back. The sides are exposed except for the left side of the phone where the cover flips over the phone.
Click to expand...
Click to collapse
For me the ideal would be a bumper, so that the edges are protected and I'm not carrying around a brick. I'll keep on duckduckgoing and see what I can find..

I've been looking for a decent rubber bumper as well. I've only seen a metal one with a weird branding on the side. Do post here if you manage to find one!

Whosat said:
I've been looking for a decent rubber bumper as well. I've only seen a metal one with a weird branding on the side. Do post here if you manage to find one!
Click to expand...
Click to collapse
I found this one here, http://www.mobilefun.com/40209-flexiframe-samsung-galaxy-s4-mini-bumper-case---black-clear.htm but I might actually get an official samsung case, it looks quite nice: http://www.samsung.com/se/consumer/mobil/mobil/mobiltillbehor/EF-PI919BNEGWW-gallery?subsubtype=bags

make onuond
Will a rubber bumper protect against a drop (say, from table height)? Will the S-view cover protect against a drop?
I wouldn't be bothered by scratch or bumps on the plastic housing. Mainly looking for protection against the screen/digitizer/glass breaking from a fall.

I bought this one.
Fits tightly around the S4 mini and does not add any bulk. The phone still looks very slim and small. Material is of good scratch resistance but probably not a real bumper. It's slightly transparent, so the Samsung logo and the silver pattern of the back cover shines through a bit. Really looks good.

charliebigpot said:
I found this one here, http://www.mobilefun.com/40209-flexiframe-samsung-galaxy-s4-mini-bumper-case---black-clear.htm but I might actually get an official samsung case, it looks quite nice: http://www.samsung.com/se/consumer/mobil/mobil/mobiltillbehor/EF-PI919BNEGWW-gallery?subsubtype=bags
Click to expand...
Click to collapse
I ordered this one:
http://goo.gl/KusTUO
It kind a looks like the "Flexiframe" from mobilefun and for the price you can't go wrong.

axelpix said:
I bought this one.
Fits tightly around the S4 mini and does not add any bulk. The phone still looks very slim and small. Material is of good scratch resistance but probably not a real bumper. It's slightly transparent, so the Samsung logo and the silver pattern of the backt cover shines through a bit. Really looks good.
Click to expand...
Click to collapse
I just received the same case and it is better than expected. Took less than a week from Germany to UK and less than 10 GBP Inc postage.
This case is so small and thin that it doesn't alter the feel of the phone apart from the texture. It'sthin enough to fit in my S2 desktop charger/dock and also my windscreen mount with the case on.

I ordered the following in blue/black. It looks somewhat...different! I hope it's not too much when I put it on the phone. It came to six euros which is reasonable. I'll post my impressions when it arrives.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=171080302080&ssPageName=ADME:L:eek:C:US:3160