Develop Bugs

can someone help me with adb

ive tried many guides on trying to install adb. i have the drivers installed but nothing is happening when i try to use sdk tools. can anyone help me?

It doesn't really "install," it just resides in a folder on your computer. When you want to use ADB, you just pass the commands through your Windows command prompt (assuming you're using Windows).
Put the Android SDK file in the root of your C: drive. In fact, make it easy and rename it "androidsdk." Inside that is the "tools" folder. Now hit Start - Run - cmd and it will start your command prompt. Then enter "cd c:\androidsdk\tools" (no quotes) and hit enter. Now you're in the ADB directory, just start running ADB commands.
Right?

whatever command i try to type in says its not a recognized internal or external command.

Can you run throught the steps you took?
These are mine:
1. Connect phone and select HTC Sync
2. Make sure you know the location patch to the android-sdk-windows(if you're using windows) folder.
3. Press start........run........then type cmd to open command prompt
4. Type cd C:\android-sdk-windows\tools(my location, yours will be wherever you extracted the zip file to)
5. Press enter
6. Type adb devices to confirm it sees your phone
7. Type adb shell and you should see a flashing # symbol
8. Start typing commands.

when i connect my phone and try to sync using htc sync it cant find it on my comp.

Do you have USB Debugging turned on?
And by the way, you don't need to set it to HTC Sync. You may have to make sure the drivers are installed correctly (I suggest TheBiles' Idiot-Proof rooting guide for that), but after that it will connect as long as you have debugging mode turned on, even if your phone is set to "Charge Only." I never put mine in "Disk Drive" mode unless I want to drag a file to my SD card, and I've never ONCE used HTC Sync.

ok thank you, so far so good. im busy doing some other work but the adb shell seems to be working. will edit later.

Edit: nvm that.

[GUIDE] Everything You Need to Setup and Use ADB

Hello All!
After much frustration with setting up ADB i finally got it working. Everyone said its simple and takes minimal knowledge but when things dont work, nothing really worked. Anyways after 2 hours of research trying to get ADB to work i finally got it all working and wanted to share my knowledge to anyone else that needed help.
This Guide is for windows only. If you are using Mac OS X please go here: ADB For Dummies
If you are using Linux please go here: [HOW-TO]Set up Android SDK/ADB/Fastboot on Ubuntu Linux
Like My Guide(s)? Donate
--------------------------------------------------------------------------
Things you need:
Android SDK - Download
Winrar - Download (32bit) Download (64bit)
Windows PC
USB Cable
A Rooted Android Device
--------------------------------------------------------------------------
Setting up the Android SDK
Download the file from above
Unzip to your desktop
Take the "android-sdk-windows" folder and move it to the root of your hard drive (C:\)
Right click on My Computer and click properties
Select the Advanced Tab or Advanced System Setting (Vista/Windows 7)
Select Environment Variables...
Press New
For Variable Name type: adb
For Variable Value type: C:\android-sdk-windows\tools
Now,
1. Run SDK Manager.exe located in the android-sdk-windows folder
2. If it gives you an error go to settings and click on "Force http//....."
3. Select all options and let it download and install
If you cant get the setup to work, Download the USB-DRIVERS folder - HERE (Windows XP/Vista/Windows 7)
--------------------------------------------------------------------------
Preparing your phone for ADB
Go to Settings on your phone
Select Applications
Select Development
Make sure 'USB Debugging' is checked
--------------------------------------------------------------------------
Installing Drivers
Plug in your phone through USB and DO NOT MOUNT IT!!!!!
Your computer should see a new device and try to install Android 1.0 driver (If it doesnt, scroll down to the "Im not getting a notification of Android ADB when i plug in my USB" section)
Let it load
Once it cant find them select "Install drivers from my pc"
The drivers you need are in the Android SDK 1.5r2 folder (C:\android-sdk-windows\usb_driver)
Depending on your OS pick x86 or amd64
You ADB Android Device should now be installed! Good Job
For Android SDK 1.5r7+
1. Run SDK Manager.exe
2. If it gives you an error go to settings and click on "Force http//....."
3. Select all options and let it download and install
If you cant get the setup to work, Download the USB-DRIVERS folder - HERE (Windows XP/Vista/Windows 7)
--------------------------------------------------------------------------
Check if your phone is detected by ADB
Open up Command Prompt (Go to run, type in cmd, press enter)
Type in
Code:
cd C:\android-sdk-windows\tools === Press Enter
adb devices === You should see your device listed
adb shell === you should see # in the next line
Now you are all set to run adb commands
Note: for a list of commands type in 'adb' in cmd
CONGRATS YOU NOW HAVE ADB FULLY RUNNING!
--------------------------------------------------------------------------
Droid Explorer by Camalot
Droid Explorer is a Windows software that will download, install, and setup the android SDK for you all in under a minute so you are ready to go. I use this on a daily basis. This amazing piece of software has tons of plugins and a built in file explorer for all your files on your phone! All you gotta do is download, install, and go!
Download Droid Explorer - Here
Install the program, and let it setup the SDK files for you
Connect your phone
Enjoy!
--------------------------------------------------------------------------
"Im not getting a notification of Android ADB when i plug in my USB"
Why: Your computer has detected your phone but as a protable device and as a storage device.
Fix: This took me a lot of research and time to figure out so this is what your are going to do.
First download USBDeview - Here
Unzip it
Run USBDeview.exe as Administrator
You will see all drivers being used on your computer
Highlight and Uninstall all drivers with the description have HTC Android (Should be 3 of them)
Right Click on the driver and press uninstall
Once done, Unplug your phone and plug it back in
You should now get the notification of the ADB device
Follow the steps above to install the drivers
Still not working?
Try this: Get ADB to recognize your myTouch 4G [Thanks importflip]
--------------------------------------------------------------------------
When Typing just adb in cmd you will get whats called a "usage doc" which gives you a lits of commands that you can use:
Code:
-d - directs command to the only connected USB devic
e
returns an error if more than one USB device is
present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <serial number> - directs command to the USB device or emulator w
ith
the given serial number
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> <local> - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] <file> - push this package file to the device and instal
l it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb root - restarts adb with root permissions
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PDP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be u
pdated.
- If it is "system" or "data", only the corresponding partition
is updated.
--------------------------------------------------------------------------
Commands that you should know
adb push - Insert file to phone such as Stock.apk to /data/app_s
Code:
adb push <pathtofile.apk> <file system location> - Example: adb push c:\app.apk /data/app
adb pull - Remove file from phone such as Stock.apk from /data/app_s
Code:
adb pull <pathtofile.apk> - Example: adb pull /data/app_s/Stock.apk
adb install - Install app to phone
Code:
adb install <path to file> - Example: adb install c:/apps/apps2sd.apk
adb uninstall - Uninstall app from phone
Code:
adb uninstall <name of application> - Example: adb uninstall linda.apk
For more ADB Commands go - Here
--------------------------------------------------------------------------
Thats it for ADB! Congrats and if you have any questions please ask me or if anything is missing or not correct please tell me. I got all of this from research and personal experience.

Even after unstalling the HTC and myTouch 4G Drivers, when I plug my MT4G back in there's nothing to install. It automatically installs what it has to. I have no idea how to connect it with ADB.

I had to do this:
http://forums.t-mobile.com/t5/Operating-System-Software/HOW-TO-Get-ADB-to-recognize-your-myTouch-4G/m-p/540017

This is why after the temp root. I used root explorer to move the files to right folder . And then used the terminal app to do the rest. Really no need to use ADB..
Sent from my HTC Glacier using XDA App

Scoop24 said:
This is why after the temp root. I used root explorer to move the files to right folder . And then used the terminal app to do the rest. Really no need to use ADB..
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
I did that too but insmod said can not open wpx.ko every time. No idea why, worked perfect on my G2.
Sent from my HTC Vision using XDA App

Arcadia310 said:
Even after unstalling the HTC and myTouch 4G Drivers, when I plug my MT4G back in there's nothing to install. It automatically installs what it has to. I have no idea how to connect it with ADB.
Click to expand...
Click to collapse
You ran the HTCDriver exe that is on the SDCard? Did you go into Devices on your computer with your phone plugged in and see what it is showing up as?

setzer715 said:
You ran the HTCDriver exe that is on the SDCard? Did you go into Devices on your computer with your phone plugged in and see what it is showing up as?
Click to expand...
Click to collapse
It seemed to work for me when I copied the HTCDriver.exe from the storage card to my PC and install the drivers. My device showed up as some letters and numbers, which is ok I guess I have not named or done anything to the device.

Amazing write up. ABD has always gave me a hard time. I will be following this write up when I get time to root this. Thanks a lot!
Sent from my HTC Glacier using XDA App

Four things:
1. You don't need the generic drivers from the SDK package. I haven't even tried them. You need the HTC Drivers on the SD card.
2. I start adb by SHIFT-right clicking on the tools directory in the SDK folder and selecting 'start command prompt here' in the contextual menu. In order to see if things are working, just type 'adb devices' to see if the HTC device is connected.
3. I don't need to disable mounting of the device. I can adb and have the SD card mounted on the PC at the same time.
4. I don't see the need to add the environmental variable. Perhaps I've done something wrong, but theoretically, by adding this variable, you should just be able to type 'adb' in any command prompt window and have the system recognize adb. I can't seem to get that to work. So, instead I just do #2 above.

setzer715 said:
You ran the HTCDriver exe that is on the SDCard? Did you go into Devices on your computer with your phone plugged in and see what it is showing up as?
Click to expand...
Click to collapse
Yes I have, how exactly do I get into devices on my computer?
Sent from my HTC Glacier using XDA App

Arcadia310 said:
Yes I have, how exactly do I get into devices on my computer?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
type
Code:
adb devices
in the command line

Arcadia310 said:
Yes I have, how exactly do I get into devices on my computer?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
What does the output from typing "adb devices" give you?

grankin01 said:
What does the output from typing "adb devices" give you?
Click to expand...
Click to collapse
It says can not recognize ADB. I have had the SDK and ADB on my PC for months.

Arcadia310 said:
It says can not recognize ADB. I have had the SDK and ADB on my PC for months.
Click to expand...
Click to collapse
Sounds like you aren't in the directory that adb is in when you type it. try going into the tools directory in your sdk and run the command from there.

Arcadia310 said:
Yes I have, how exactly do I get into devices on my computer?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
What version of windows are you running?

setzer715 said:
What version of windows are you running?
Click to expand...
Click to collapse
Windows XP. When i actually go to ADB and click on it it opens and closes within an instant.
Sent from my HTC Vision using XDA App

Arcadia310 said:
Windows XP. When i actually go to ADB and click on it it opens and closes within an instant.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
You don't click on it. It's a utility to use in command line. What it does is makes it easier to enter commands (along with some other useful stuff). Basically, anything you would type in terminal you can type in command line on your pc with "adb shell" pre-face. For example:
In terminal: cd /system/app
In command line: adb shell cd /system/app
Makes sense? You should really read up some guides out there

floepie said:
Four things:
1. You don't need the generic drivers from the SDK package. I haven't even tried them. You need the HTC Drivers on the SD card.
2. I start adb by SHIFT-right clicking on the tools directory in the SDK folder and selecting 'start command prompt here' in the contextual menu. In order to see if things are working, just type 'adb devices' to see if the HTC device is connected.
3. I don't need to disable mounting of the device. I can adb and have the SD card mounted on the PC at the same time.
4. I don't see the need to add the environmental variable. Perhaps I've done something wrong, but theoretically, by adding this variable, you should just be able to type 'adb' in any command prompt window and have the system recognize adb. I can't seem to get that to work. So, instead I just do #2 above.
Click to expand...
Click to collapse
Hey sorry about the driver problems... i wrote this guide based on the Nexus one and T-Mobile G1 and was asked to repost it here. If you let me know exactly what drivers you used i can change it in the OP.
The environmental variables set so that you can run adb and fastboot commands from anywhere in windows without have to be in the tools directory of the sdk. You can press SHIFT or w/e but this is a 1 time solution so u basically never have to be in that directory again...
As for the mounting, it is recommended that you dont mount your SD-Card and use adb for editing system files because that could corrupt your sd card.

Thank you, I got it working. Android is very different from winmo.

nephron said:
--------------------------------------------------------------------------
"Im not getting a notification of Android ADB when i plug in my USB"
Why: Your computer has detected your phone but as a protable device and as a storage device.
Fix: This took me a lot of research and time to figure out so this is what your are going to do.
First download USBDeview - Here
Unzip it
Run USBDeview.exe as Administrator
You will see all drivers being used on your computer
Highlight and Uninstall all drivers with the description have HTC Android (Should be 3 of them)
Right Click on the driver and press uninstall
Once done, Unplug your phone and plug it back in
You should now get the notification of the ADB device
Follow the steps above to install the drivers
Still not working?
Click to expand...
Click to collapse
This saved me... Constantly had it reverting back to USB storage device, this did the job. Thanks, a little something coming your way...
Bill

[Q] Help with setting up adb shell

I must be stupid or something cause I'm stuck on getting this to work. Can someone help me finalize setting up adb shell?
This is where I am so far:
I have installed phone driver and Android SDK. In SDK have installed packages API 2 through 8, usb driver package 3, etc.
What do I need to do when opening SDK manager? My phone is in tether mode but it just sits there. What am I not doing?
Thanks.

No love from the community on this one??

I'm a little confused.
When you set the evo to usb debugging and open a command prompt, cd to your sdk/tools dir, enter "adb devices" does your evo show up? It should be listed as a serial #.

Yes.....an HT### serial comes up which I am assuming is the phone. Guessing I can now just run the commands I need and it will communicate with the phone?
My confusion was that I was running the SDK Manager.exe and expecting it to find my phone and produce the adb shell.

Ok! You should be good to go. Just enter "adb shell" and you are set.

Good deal....thx.

Ok....thought I had this working. However, when in adb shell any commands I put in tells me "adb: not found".
What do I need to do from this point?

Let me clarify this.....
When I list devices it does find my phone. But, when issuing the adb shell command and trying to enter anything from the "#" prompt it always says "adb: not found".
I must be missing a step or something.

I'm kind of confused, mostly because I don't know what it is you're doing in a shell, but once you're in the shell and you get the # sign, there's no need to type in adb before your commands, for example, from the command line you would navigate to your tools folder. For me it would be
cd AndroidSDK/tools
./adb shell
Some jibber jabber about daemon starting
#
From then on I could run whatever command I planned on running in the shell like
echo 1 > /sys/class/leds/flashlight/brightness
And not
./adb echo 1 > /sys/class/leds/flashlight/brightness

CCallahan said:
Let me clarify this.....
When I list devices it does find my phone. But, when issuing the adb shell command and trying to enter anything from the "#" prompt it always says "adb: not found".
I must be missing a step or something.
Click to expand...
Click to collapse
What exactly are you trying to accomplish? Then we can determine what's going on.

I'm running Myn's RLS4 and am trying to change the power bar in the notifications.
Trying to follow the instructions in this link: http://forum.xda-developers.com/showthread.php?t=836721

OK. What part are you getting stuck at?
Edit: for this code, you do not need to be in the ADB shell:
Code:
adb remount
adb push widget.txt /system/customize/
adb reboot
You just need to cd to your tools folder of the SDK in your command prompt.

CCallahan said:
I'm running Myn's RLS4 and am trying to change the power bar in the notifications.
Trying to follow the instructions in this link: http://forum.xda-developers.com/showthread.php?t=836721
Click to expand...
Click to collapse
The commands he has given here
Code:
adb remount adb push widget.txt /system/customize/ adb reboot
do not require you to be in an adb shell, you just open up the command window do an adb remount then type in his commands one by one and male sure you have the .txt file that specifies what widgets you're going to use is in the tools folder of your AndroidSDK folder so that adb can locate and push it to its respective directory.

Ok...that worked.
Knew I was doing something wrong. Was trying to run those commands from the adb shell....makes sense that it could not find adb.
Thanks.

i have no adb shell at all can anyone help?

[Q] ADB wont recognize G2

i plug my G2 running ICS 4.0.3 into my computer with usb debugging turned on. I type in the command prompt "adb devices" but it dosent recognize my G2 at all...all i get is "adb is not recognized as an internal or external command, operable program or batch file" can anyone help me out...i want to push some files to my system directory but adb just wont recognize the damn phone.

MMontanez347 said:
i plug my G2 running ICS 4.0.3 into my computer with usb debugging turned on. I type in the command prompt "adb devices" but it dosent recognize my G2 at all...all i get is "adb is not recognized as an internal or external command, operable program or batch file" can anyone help me out...i want to push some files to my system directory but adb just wont recognize the damn phone.
Click to expand...
Click to collapse
Set up a. System path to adb or cd to the location of adb
Sent from my HTC Vision using XDA App

MMontanez347 said:
i plug my G2 running ICS 4.0.3 into my computer with usb debugging turned on. I type in the command prompt "adb devices" but it dosent recognize my G2 at all...all i get is "adb is not recognized as an internal or external command, operable program or batch file" can anyone help me out...i want to push some files to my system directory but adb just wont recognize the damn phone.
Click to expand...
Click to collapse
Did you add the right line in 51-android.rules?
Sent via smoke signal.

MMontanez347 said:
i plug my G2 running ICS 4.0.3 into my computer with usb debugging turned on. I type in the command prompt "adb devices" but it dosent recognize my G2 at all...all i get is "adb is not recognized as an internal or external command, operable program or batch file" can anyone help me out...i want to push some files to my system directory but adb just wont recognize the damn phone.
Click to expand...
Click to collapse
Do you perhaps have Boot manager installed.
I had it recently and adb would not work for me.
After i uninstalled it everything went back to normal

MMontanez347 said:
i plug my G2 running ICS 4.0.3 into my computer with usb debugging turned on. I type in the command prompt "adb devices" but it dosent recognize my G2 at all...all i get is "adb is not recognized as an internal or external command, operable program or batch file" can anyone help me out...i want to push some files to my system directory but adb just wont recognize the damn phone.
Click to expand...
Click to collapse
Run adb from the directory it is in...you can do this easily by holding shift and right clicking withing the directory your adb.exe file is in. You can then click open command prompt here. That will allow you to then type adb devices but I have a feeling you won't see any devices...unless you set this up before.
Sent from my HTC Vision using XDA App

First of all get the G2 usb drivers install it on the pc..second on the cmd type in
Cd/
Cd androidsdk/tools/
adb devices
*your phone should be pluged in...most time the reason why it won't pick up the device is because the drivers aren't installed.
Sent from my HTC Glacier using xda premium

What guide did you use to set up ADB? Maybe you should just completely remove it and install it again and see if that makes a difference. I used this guide http://wiki.cyanogenmod.com/wiki/Howto:_Install_the_Android_SDK, to set up ADB for myself and it has always been working correctly (even wirelessly). Before trying out that guide though, I would suggest trying to see if ADB works on a gingerbread ROM as both Virtuous Quattro and Andromadus ROM (i'm assuming you're using one of these) are not fully stable and it could simply be an issue with the build of ICS that you are using.

Guys the first reply already answered the original question. That error message is a standard one for the Windows command line if it doesn't recognise a command at all - i.e. it doesn't know where to find "adb". So most likely the path wasn't setup, as has been said.
Sent from my Desire Z running CM7.

ADB Shell is acting very weird..

When using "normal" ADB, it works just fine, i can push and pull files from sdcard and everything.
But when i try to use any form of ADB Shell, it starts acting weird.
I can connect to ADB just by plugging my phone in and using cd to the adb folder. I can see the device ID with "adb devices".
But when i type "adb shell", it suddenly says that "daemon not running. starting it now on port 5038", then immediately says it started successfully, but yet it shows "list of devices attached" and there is none. No matter what i try and do, it simply won't show when using adb shell..
I can type "exit" to simply exit adb shell and still be in adb, and it will immediately start working normally again..
I've tried to flash my rom again, mount and unmount system (that was the location i tried to use adb shell to get to, to pull some system files), rebooting my computer, restarting my phone, did a battery pull.
Can anyone help me? :S