This kernel is for CM7, but should work on any AOSP Rom.
I am maintaining this kernel from now on.
Known bugs
None
If any bugs are found I will add it here
Stable V1.0.0.1
Features: New Smartass governor, Undervolted, SLUB unqueued allocater, BFQ v2, BFS 404, Readahead buffer increased to 1040, Optimized compiler (compiled with neon and cortex flags) , Lagfree Governor, swap support, bfs tweaks, smoothass governor, backported conservative and ondemand govs from 3.0 rc7, backported wifi driver from 3.0 rc7, cpuidle code from 3.0 rc6, minmax governor, interactiveX governor, vdd leves interface (supports scriptfusion from the tbolt forum and vipermod from the tbolt forum), call recording, other various tweaks and optimizations.
Click to expand...
Click to collapse
V4
Re based on official cm source, backport 3.0 rc6 cpuidle code, backport 3.0 rc7 wifi driver, remove call recording, add minmax governor, interactive gov is MIa
Click to expand...
Click to collapse
Features: New Smartass governor, Undervolted, SLUB unqueued allocater, BFQ v2, BFS 404, Readahead buffer increased to 1040, Optimized compiler (compiled with neon and cortex flags) , Lagfree Governor, Kernel now supports swap, smoothass governor, bfs tweaks, smoothass governor, backported conservative and ondemand govs from 2.6.39, backported wifi driver from 2.6.39, call recording support.
Click to expand...
Click to collapse
Stable 1.0.0.1
DOWNLOAD
md5
c8e40626e821c9ed7e2950d32cb503ad
V4
DOWNLOAD
md5
99f05f2aa5848d3e21ad52a050aa13f5
SOURCE
To keep with the latest updates, you can also purchase the JDkernel update app JDkernel downloader
I was playing around with this this morning, and installed it over my MIUI ROM. I wiped Dalvik first, and flashed it. MIUI didn't really like it, even though I was using jcase's 1.8 ghz CM7 kernel with it. It caused it to bootloop (or what appeared to be a bootloop), but came out of it and loaded the ROM after about 6 loops. It ran fine after that, but then on a reboot, caused a ton of lag.
I now have it running on CM7 fine. I didn't overclock it, and am getting 2200 Quadrant scores running the 'lagfree' gov. Very snappy.
I know this is probably a pretty general question, but how does this kernel compare to the stock CM7 kernel?
Sent from my Incredible 2 using XDA App
v2 is out.
Updated with version 3.
This looks great. I will try it out. Smart ass governor did wonders on my dinc1.
So let me be sure here, Im running the current CM7 offered here, I can just run this zip in recovery over my current Rom.
Its from jdkoreclipse, I won't be downloading
Sent from my Incredible 2 using XDA App
Bobby Buggs said:
So let me be sure here, Im running the current CM7 offered here, I can just run this zip in recovery over my current Rom.
Click to expand...
Click to collapse
Yes sir.
Sent from my ADR6350 using Tapatalk
Snappyts said:
Its from jdkoreclipse, I won't be downloading
Sent from my Incredible 2 using XDA App
Click to expand...
Click to collapse
No one is forcing you to. Bye bye.
Sent from my ADR6350 using Tapatalk
Snappyts said:
Its from jdkoreclipse, I won't be downloading
Click to expand...
Click to collapse
WTF is that butthurt all about
can anyone explain what the differences are bw the governors offered by this kernel?
DroidDont said:
The man with a million accounts returns!
Click to expand...
Click to collapse
Excuse me?
trock79 said:
No one is forcing you to. Bye bye.
Sent from my ADR6350 using Tapatalk
Click to expand...
Click to collapse
He constantly got bashed on incredible 1 forums for stealing work, he was banned for awhile
Sent from my Incredible 2 using XDA App
In case you are wondering whether or not to download this kernel, hopefully this will help.
Take a look at this guy's signature here:
http://forum.xda-developers.com/member.php?u=2355353
That sig highlights the conquests of user JDKoreclipse aka rr12106, droidhacker26, m0rt4l s0ul, romflash, & k_chupe.
This is relevant because the kernel in this thread is being hosted at jdkoreclipse.com.
Snappyts said:
He constantly got bashed on incredible 1 forums for stealing work, he was banned for awhile
Sent from my Incredible 2 using XDA App
Click to expand...
Click to collapse
I understand that, but I have been working with him for over 6 months and he has helped me learn when most people wouldn't even respond. He has been trying to make good with all he did in the past but no one will give him a chance. Well hell I don't need to apologize for him- so read this POST Now back to the kernel. I will be taking over development of this very soon, maybe this weekend.
thenickisme said:
In case you are wondering whether or not to download this kernel, hopefully this will help.
Take a look at this guy's signature here:
http://forum.xda-developers.com/member.php?u=2355353
That sig highlights the conquests of user JDKoreclipse aka rr12106, droidhacker26, m0rt4l s0ul, romflash, & k_chupe.
This is relevant because the kernel in this thread is being hosted at jdkoreclipse.com.
Click to expand...
Click to collapse
Exactly, it seems he has apologized for his actions in the past, non the less everyone should be aware of the history before flashing one of his builds
Sent from my Incredible 2 using XDA App
Okay everyone, and let's get this thread back on topic. Has anyone else tried this with MIUI?
Sent from my Incredible 2 using XDA App
capcoward said:
Okay everyone, and let's get this thread back on topic. Has anyone else tried this with MIUI?
Sent from my Incredible 2 using XDA App
Click to expand...
Click to collapse
I was just about to ask the same thing.
This should work on any AOSP Rom.
Related
Updated - 8/23/2011
Note - 8/19/2011
I pulled out the BFS builds for the public because almost nobody uses it and it takes extra time for me to keep up multiple builds. If you like one of my builds and you really want to use BFS, shoot me a private message and I can patch it in for you.
Also, I'm redoing the governors I'll be adding a modified on demand and interactive to each one when I play with them a bit more. All of these are running ondemand if you flash them, just so you know.
Currently all kernels are built from source 2.6.35.7
Base1 -1.2 Overclock | Tiny Undervolt
Base2 -1.2 Overclock | Tiny Undervolt | BLN Support
Base3 -1.2 Overclock | Tiny Undervolt | Voodoo v10
Base4 -1.2 Overclock | Tiny Undervolt | BLN | Voodoo v10
I have made versions of my kernel available with the ability to change your voltages using at least setCPU, if you are using one of those kernels and you have played with the voltages, please do not comment on here about an issue as I'll only support issues for the voltages I've set.
Base1 -1.2 Overclock | UserVolts
Base2 -1.2 Overclock | UserVolts | BLN
Base3 -1.2 Overclock | UserVolts | Voodoo v10
Base4 -1.2 Overclock | UserVolts | BLN | Voodoo v10
--Original Post--
I figured I might as well throw this out here. I know this space is already eaten up by a few other kernels but hell with it. I've been running stuff I've been building since the CDMA Hero but I quit releasing things during drama. I'm not a big fan of a million features packed into a kernel so be aware that this might not be what you're looking for.
Most of my inspiration is from a few years back but I have contacted current devs too... so thank you to to all the inspiration from dev's with open githubs - netarchy, cyanogen team, cayniarb and I'm sure I've browsed through others. Mathkid also helped me figure out why bluetooth didn't build right on the Nexus S, so thank you.
AnyKernel by Koush
Thanks for releasing this. Sounds good.
Zip works just fine. Like the intro of the new governor
dfbonney said:
I figured I might as well throw this out here. I know this space is already eaten up by a few other kernels but hell with it. I've been running random stuff I've been building randomly since the CDMA Hero but I quit releasing things during drama. I'm not a big fan of a million features packed into a kernel so be aware that this might be what you're looking for.
Most of my inspiration is from a few years back but I have contacted current devs too... so thank you to to all the inspiration from dev's with open githubs - netarchy, cyanogen team, cayniarb and I'm sure I've browsed through others. Mathkid also helped me figure out why bluetooth didn't build right, so thank you.
Built from source 2.6.35.7
Default Governor - conservative
BLN - I dont personally use this, just added for a friend... your call if it works.
Overclock - Clocked at 1.2
Extra Governor - dfconservative - scales up slower and down faster
I've noticed an issue that if I clock at 100/800 then sometimes my cpu jumps up to 200 randomly but I cant seem to find anything while watching the debugging so I'll probably play with the voltages some. Right now its not undervolted and I havent decided if I want to deal with user issues due to modifying voltages.
I'm not currently using a custom recovery, so let me know if this .zip doesnt work for you. Its based on AnyKernel by Koush.
dfkernel --- http://db.tt/qc6K54A
Click to expand...
Click to collapse
I like the way this sounds. I've been looking for something like cfs @ 1.2ghz without the need for a cpu oc tool and WITHOUT BLN. Any way you can make this a reality?
tailsthecat3 said:
I like the way this sounds. I've been looking for something like cfs @ 1.2ghz without the need for a cpu oc tool and WITHOUT BLN. Any way you can make this a reality?
Click to expand...
Click to collapse
Sure, I'll have one up today with default conservative.
edit- changed this whole post around.
I use these. I put them in /etc/init.d
http://db.tt/dCoJK5I Max freq script
http://db.tt/WcsfZfp Governor script
Is there a source on git for this kernel?
Thanks for the Dev and like the sound of what you're drumming up.
snandlal said:
I use these. I put them in /etc/init.d
http://db.tt/dCoJK5I Max freq script
http://db.tt/WcsfZfp Governor script
Is there a source on git for this kernel?
Click to expand...
Click to collapse
I was asking him which default governor he'd like(which now I've decided I should stick with my roots)... I'm a fan of the conservative governor on this phone. All my HTC phones did much better with interactive/smartass but this phone pops the cpu up randomly (even while asleep) when you use those so I didn't include them in the release, though I tried them in testing.
My git is super ugly and will be changing - http://github.com/dfbonney
adb commands I use for watching my cpu stuff:
cat /proc/cpuinfo
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
Awesome! No issues so far... Using Ondemand gov and running smooth... Conservative is not my thing The more options for the NS4G the better. Looking forward to this and more.
dfbonney said:
Sure, I'll have one up today with default conservative.
edit- changed this whole post around.
Click to expand...
Click to collapse
Thanks! I love acs' matrix but I would prefer it to be bone stock(w/o all the add ons), with the cfs, @1.2 w/o Oc tool and no bln.
Sent from my Nexus S 4G via XDA Premium
If you took out BLN and put Voodoo sound, I wouldn't have a problem with that at all.
Sent from my Nexus S 4G
tailsthecat3 said:
Thanks! I love acs' matrix but I would prefer it to be bone stock(w/o all the add ons), with the cfs, @1.2 w/o Oc tool and no bln.
Sent from my Nexus S 4G via XDA Premium
Click to expand...
Click to collapse
Completely stock would be ondemand governor, I'll do it just cause I can even though its not my thing!
ogbreds said:
If you took out BLN and put Voodoo sound, I wouldn't have a problem with that at all.
Sent from my Nexus S 4G
Click to expand...
Click to collapse
This is funny, I planned on looking at what this is today... it might just happen.
dfbonney said:
Completely stock would be ondemand governor, I'll do it just cause I can even though its not my thing!
Click to expand...
Click to collapse
Thanks for the wisdom. Then I suppose I'd try the on demand if you make it! Also the cfs
Sent from my Nexus S 4G via XDA Premium
Hmmm...I don't think I could live without BLN on this phone. Maybe you could put out different builds. ???
tailsthecat3 said:
Thanks for the wisdom. Then I suppose I'd try the on demand if you make it! Also the cfs
Sent from my Nexus S 4G via XDA Premium
Click to expand...
Click to collapse
CFS is also your "stock" build. I will build a modified BFS some day because that is what I like.
dfbonney said:
This is funny, I planned on looking at what this is today... it might just happen.
Click to expand...
Click to collapse
It would be greatly appreciated.
Sent from my Nexus S 4G
tailsthecat3 said:
I like the way this sounds. I've been looking for something like cfs @ 1.2ghz without the need for a cpu oc tool and WITHOUT BLN. Any way you can make this a reality?
Click to expand...
Click to collapse
See first post, this is complete.
dfbonney said:
See first post, this is complete.
Click to expand...
Click to collapse
Thanks a lot. Downloaded base 2, gon give it a shot.
Sent from my Nexus S 4G via XDA Premium
tailsthecat3 said:
Thanks a lot. Downloaded base 2, gon give it a shot.
Sent from my Nexus S 4G via XDA Premium
Click to expand...
Click to collapse
Let me know how it goes?
jeffreynothing43 said:
Let me know how it goes?
Click to expand...
Click to collapse
Going well. I'm not one for benchmarking phones but it works well. I'm a battery whore so I prefer stock. But I can't resist the overclock.
Sent from my Nexus S 4G via XDA Premium
IceandFire and eXistZ presents Apocalypse-Talon kernel.
Features
Backlight and screen dimmer, touch wake patch.
Voodoo Sound V10
Voodoo Color
Can be overclocked and allow undervolted.
Lazy governor.
Overclockable to 1440MHz
Overclocked to 1100MHz by default.
Uses Koush's Any kernel.
Sched_autogroup patch.
BLN for both i9020 and i9023
init.d scripts for Ezekeel's mod.
Added Deep Idle mod
etc
Changelog:
All the bug fixes for deep idle included.
Deep idle not active by default.
BLD, touch wake, screen dimmer fixes.
Added VR I/O scheduler and set it as default.
Tuned VR scheduler for better performance.
Battery can charged to 100%
BLX removed.
Installation:
Use CWM recovery to flash from sdcard.
Download:
Code:
http://www.multiupload.com/7JNNVCDC8C
Notes:
Works on Nexus S 4G.
Supports every rom.
For optimal performance, try it with iceandfire roms.
Thanks to:
Cyanogenmod team for sources.
eXistZ for helping me out.
Supercurio for voodoo patches.
Ezekeel for his mods and lazy governor.
Koush for any kernel template.
KalimochoAZ for battery charging tweak.
Morifc for helping me out.
RSVP...
Looking very interesting, I'll have to take this for a spin.
thanks
iceandfire said:
IceandFire and eXistZ presents Apocalypse-Talon kernel.
Features
Backlight and screen dimmer, touch wake patch.
Voodoo Sound V10
Voodoo Color
Can be overclocked and allow undervolted.
Lazy governor.
Overclockable to 1440MHz
Overclocked to 1100MHz by default.
Uses Koush's Any kernel.
Sched_autogroup patch.
BLN for both i9020 and i9023
init.d scripts for Ezekeel's mod.
Battery life eXtender.
Etc
Installation:
Use CWM recovery to flash from sdcard.
Download:
Code:
http://www.multiupload.com/8CVF5RTHZA
Notes:
Works on Nexus S 4G.
Supports every rom.
For optimal performance, try it with iceandfire roms.
Thanks to:
Cyanogenmod team for sources.
eXistZ for helping me out.
Supercurio for voodoo patches.
Ezekeel for his mods and lazy governor.
Koush for any kernel template.
Click to expand...
Click to collapse
so far so good! thanks Ice! im looking at undervolting it now and see how it performs. using it with petes 2.3.7 now. want to try it with your rom but want to keep google wallet running on a 2.3.7 rom lol! awesome work again!
I've only recently switched to the Nexus and have been getting dismal battery life (literally, 6 hours or so with light usage.)
Anyway, I will certainly be trying this out! Thanks for all your hard work!
Only got bootlooping
Sent from my Nexus S 4G using Tapatalk
anderson620 said:
I've only recently switched to the Nexus and have been getting dismal battery life (literally, 6 hours or so with light usage.)
Anyway, I will certainly be trying this out! Thanks for all your hard work!
Click to expand...
Click to collapse
I had same issue when I first got my ns4g, but after settling in on a rom and conditioning my battery, I'm consistantly getting about 18 hours of usable time. And I consider myself a fairly heavy user.....streaming Pandora and MLB, lots of browsing, texts, twitter etc..... and averaging about 4 hours of screen on time.
Cm nightlies
Matr1x 8.0 cfs
Clocked @ 1000 & 200 smartass v2
ahhhhh...........gone todash..............
enik_fox said:
Only got bootlooping
Sent from my Nexus S 4G using Tapatalk
Click to expand...
Click to collapse
Sounds like a bad download. Try redownloadingbit again see if that works.
Sent from my Nexus S 4G using xda premium
flashed this morning just fine, everything else seems aok. great addition to the nexus legacy.
thanks
Just flashed awhile ago and so far so good. I like the additional governors
First boot takes a while people so be patient.
Running CM7-Stable.
Is this a CM 2.6.35.14 based kernel?
Anyone got a working link? Thanks in advance.
Sent from my Nexus S 4G using xda premium
Comment:
Running this on CM7 Stable RC 7.1.0 and using the stock setting of SmartAssv2 governor I had to bump the bottom Mhz from 100 to 200 to stop lockups on my device....
Of course we know kernels can vary from device to device but it seems like it didn't like having to wake from 100 Mhz.
Looks interesting!
Question: How does the touch-wake feature impact the battery life? Anybody notice a significant difference?
zackandethan said:
Anyone got a working link? Thanks in advance.
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Nevermind I got it finally
Sent from my Nexus S 4G using xda premium
so far so good i roasted it on top of kushdeck's 1.3e rom.
Edit: 200-800 MHz smart ass v2
Sent from my Nexus S 4G using xda premium
Works just as well as matrix does, great job!
derekwilkinson said:
Works just as well as matrix does, great job!
Click to expand...
Click to collapse
Lol
Sent from my HTC Sensation 4G using XDA App
mathkid95 said:
Lol
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
derekwilkinson said:
Works just as well as matrix does, great job!
Click to expand...
Click to collapse
you could almost say they are practically the same kernel
chalan30 said:
you could almost say they are practically the same kernel
Click to expand...
Click to collapse
Hmmmmmm lol
Sent from my Nexus S 4G
chalan30 said:
you could almost say they are practically the same kernel
Click to expand...
Click to collapse
They aren't.
Sent from my Nexus S using Tapatalk
IML74K Kernel
Credits: turl, isaacj, Michael Huang, erasmux, Mathieu Desnoyers, ezeekiel
Special thanks to:
- cyanogen,firefart,trock79 for the JDkernel app.
- Ziggy for teaching me how to patch kernels.
- Imoseyon for general help here and there.
So, its finally here! After rigorous testing, my testers and I feel that this kernel is acceptable for release. I spent the last few days squashing bugs and optimizing the kernel, testing it, and making sure it works well on the Maguro and Toro
Features:
JDKernel Updater App
CIFS
Optimized Smartass2 Cpufreq governor
Hotplug Cpufreq governor
Optimized LagFree Cpufreq governor
Patched as close to mainline as possible (3.0.14)
Overclock to 1.35ghz
CFQ IOSCHED
Undervolted a nice amount
removed some bloat
Using EXT4 for EXT2/3
GPU O/C
FAIR_SLEEPERS
Optimized makefile
Lowered default_dirty_ratio to 10
Lowered vfs_cache_pressure to 50
Swap enabled
SLQB slab allocater
other mods too small for me to remember.
CHANGELOG:
v1.1.2: Re-did source, removed some bloat, changed to CFQ, changed to SLQB, Undervolted, optimize smartass and Lagfree govs, removed interactiveX
v1.0.0.5: Initial release
DOWNLOAD: http://db.tt/lmbJ2nT6
Source: https://github.com/jdkernel/android-omap-tuna_3.0
PS:
There are 3 ways to donate for this work (whichever works for you):
1) Donate to Michael Huang by buying SetCpu
2) Donate to your favorite charity
3) Donate to me here: http://jdkoreclipse.net/donate.php
If you have any problems and need to hit me up in real time, go to my IRC channel here: http://jdkoreclipse.net/irc.php
so, just to make sure .... this kernel is NOT working with 4.0.2 or?
Thx for your work!
Use this Kernel with MONACO r8 and it runs like hell!
GTA 3 is working!
Sent from my Galaxy Nexus using xda premium
lordofcamster said:
Thx for your work!
Use this Kernel with MONACO r8 and it runs like hell!
GTA 3 is working!
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Runs like hell? I don't quite know what to make of that!? I take it the phone gets quite hot?
Regards.
He means fast
Few pointers: why do you have swap? We don't need bloody swap in this devices. BFQ scheduler? BFQ is for rotational devices, we have flash devices. Why SLAB and no SLQB or SLUB? Why smartass2? Smartass2 isn't working good, even after changing the tunables for SMP. Why interactiveX? We already have interactive and it already has a built-in sysfs screen off freq parameter. Lagfree governor? It looks like Minmax to me.
Merry christmas!
i don't have any tech knowledge about kernels and such so i can't comment on franco's input but i have to agree with lordofcamster;
i'm too running the latest MCR release and together with this kernel the thing is really smooooth; oc'ed at 1350 ( 1125 uv ) with interactiveX governor
batterylife seems pretty ok too; i'm trying to drain the battery to see how much screen time i can get...
so far 2hrs + some minutes screen on and i'm down to 56% battery;
( in between i restarted the phone 5 times )
Sorry if this is a stupid question, but what does tuna refer to?
Sent from my Galaxy Nexus using Tapatalk
brian6685 said:
Sorry if this is a stupid question, but what does tuna refer to?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
see here
Battery is not at that great isnt it ?
leoaudio13 said:
Battery is not at that great isnt it ?
Click to expand...
Click to collapse
Well, the kernel is rather new. So no rapports yet. So stating the battery life isnt great, is premature
Heppieboeddah said:
Well, the kernel is rather new. So no rapports yet. So stating the battery life isnt great, is premature
Click to expand...
Click to collapse
Just my 2 cents . No offence here. Totally agree that still premature. Im testing it now
Sent from my Galaxy Nexus using xda premium
franciscofranco said:
Few pointers: why do you have swap? We don't need bloody swap in this devices. BFQ scheduler? BFQ is for rotational devices, we have flash devices. Why SLAB and no SLQB or SLUB? Why smartass2? Smartass2 isn't working good, even after changing the tunables for SMP. Why interactiveX? We already have interactive and it already has a built-in sysfs screen off freq parameter. Lagfree governor? It looks like Minmax to me.
Click to expand...
Click to collapse
Its the tone that creates the music.....My conclusion is: youre not really a person with musical skills.
justmy2cents
---------- Post added at 05:36 PM ---------- Previous post was at 05:31 PM ----------
leoaudio13 said:
Just my 2 cents . No offence here. Totally agree that still premature. Im testing it now
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Testing it as well. I am using Setcpu to UV a bit...Stolen from Franco...
http://rootzwiki.com/topic/13200-ke...x-mas-release/page__view__findpost__p__323808
franciscofranco said:
Few pointers: why do you have swap? We don't need bloody swap in this devices. BFQ scheduler? BFQ is for rotational devices, we have flash devices. Why SLAB and no SLQB or SLUB? Why smartass2? Smartass2 isn't working good, even after changing the tunables for SMP. Why interactiveX? We already have interactive and it already has a built-in sysfs screen off freq parameter. Lagfree governor? It looks like Minmax to me.
Merry christmas!
Click to expand...
Click to collapse
We've got this cool thing called PM (Private Message) on this great board. Give it a go sometime
Sent from my Galaxy Nexus
Heres my opinion: with this kernel, lags all over Settings, switching apps, market. But scrolling pages in menu is fine. Cant test battery atm as im almost out and need a recharge
OVERALL: u defo getting there but we need some minor tweaks here and there. Im so sorry that i cant help much as im not a kernel master but those r just my 2 cents
Sent from my Galaxy Nexus using xda premium
ScooterG said:
We've got this cool thing called PM (Private Message) on this great board. Give it a go sometime
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
This is a dev forum, not a chat board. I gave him my input to help him, I got nothing to hide from the users.
Sent from my Galaxy Nexus using xda premium
bk201doesntexist said:
see here
Click to expand...
Click to collapse
Gotcha, thanks
Sent from my Galaxy Nexus using Tapatalk
franciscofranco said:
This is a dev forum, not a chat board. I gave him my input to help him, I got nothing to hide from the users.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I know it might not sound like it, but Franco means well.
Sent from my Galaxy Nexus using xda premium
I've got lag in settings menu in every rom with every kernel...imho it's not a problem with this kernel
i agree franco or any other kernel lags in this situation..
Hello,
I used the search tool. But couldn't find a download link.
I'll appreciate it if someone will be kind enough, to post a download link for a governor, like smartass. every know and then I read feedback about it .
I want to try it
thanks
Try eugene373 kernels.
Sent from my SGH-T989 using xda premium
ok, btw I am using the darksideX kernel
tomasitoc said:
Hello,
I used the search tool. But couldn't find a download link.
I'll appreciate it if someone will be kind enough, to post a download link for a governor, like smartass. every know and then I read feedback about it .
I want to try it
thanks
Click to expand...
Click to collapse
Governors are not mods that you can download. They're inherently built into the kernel that you're using. Eugene has smartass built into his streamline kernel, as does synergy. Although I definitely do not recommend using smartass, it doesn't play well with our chipset. Usually after locking and unlocking the screen, it'll stick at max frequency
yes, you are correct, the black edition remake rom came with the synergy kernel, I saw the smartass governor when I open the setcpu app.
But I don't know what happened the smartass governor is now gone! I reinstalled the black edition rom, Hoping to get the smartass back, unfortunately,I still do not get back the smartass governor that came with the synergy kernel. I don't know how to get it back.
I instead flashed the darksideX kernel, it is much smoother, do you know if the darkside X kernel has an update?
tomasitoc said:
yes, you are correct, the black edition remake rom came with the synergy kernel, I saw the smartass governor when I open the setcpu app.
But I don't know what happened the smartass governor is now gone! I reinstalled the black edition rom, Hoping to get the smartass back, unfortunately,I still do not get back the smartass governor that came with the synergy kernel. I don't know how to get it back.
I instead flashed the darksideX kernel, it is much smoother, do you know if the darkside X kernel has an update?
Click to expand...
Click to collapse
Nope, the only updated one is included in his own ROM and can't be found anywhere else.
Sent from my SGH-T989 using XDA
tomasitoc said:
yes, you are correct, the black edition remake rom came with the synergy kernel, I saw the smartass governor when I open the setcpu app.
But I don't know what happened the smartass governor is now gone! I reinstalled the black edition rom, Hoping to get the smartass back, unfortunately,I still do not get back the smartass governor that came with the synergy kernel. I don't know how to get it back.
I instead flashed the darksideX kernel, it is much smoother, do you know if the darkside X kernel has an update?
Click to expand...
Click to collapse
The reason the smartass governor disappeared is because black edition has been updated to ics and currently there is only one kernel that is compatible with ics and it's the leaked at&t kernel which does not support smartass. If you're on a gingerbread ROM you can just install the synergy kernel to get it back. But like I said, smartass doesn't work for our phones so I don't know why you're so determined to try it
yoft1 said:
Governors are not mods that you can download. They're inherently built into the kernel that you're using. Eugene has smartass built into his streamline kernel, as does synergy. Although I definitely do not recommend using smartass, it doesn't play well with our chipset. Usually after locking and unlocking the screen, it'll stick at max frequency
Click to expand...
Click to collapse
i saw this happening with other governors based on smartass as well.
as far as i know, synergey and streamline have the most supported governors.
Sent from my SGH-T989 using XDA
jordanishere said:
i saw this happening with other governors based on smartass as well.
as far as i know, synergey and streamline have the most supported governors.
Sent from my SGH-T989 using XDA
Click to expand...
Click to collapse
Yeah savagedzen and brazilianwax are both based on smartass and don't work either
Yea, unfortunately Smartass gov is not compatible with our hardware, there are no fixes for this. Faux tried to get this to work ad-nauseam a few months ago.
I would like to thank for all help and support
morfic, interloper, chris41g and talustus
Now to the kernel.
This kernel is for TW (stock based) JB roms only.
It will not work/boot with any of AOSP/AOKP/CM roms.
Current version is 0.4.3
This kernel is based on Samsung latest MA06 JB source
I'll be adding more features to and and will update thread as I go.
Flashed it on my phone. So far everything working.(2 hrs and counting).
- Upgraded to Linux version 3.0.71
- Available Schedulers
NOOP, CFQ, NOOP, DEADLINE, ROW, SIO - init.d support
- custom bootanimation support
- WiFi confirmed working.
- Added AGAT initlogo.lre
- Added Hotplug support. CPU1 is offline when is not needed.
- Available governors.
Adaptive, Lagfree, Ondemand, Performance, Hotplug, Userspace, Knoonservative - 64 GB SD Card support (don't have card to test it tho). Hope you guys can confirm it's working.
- OC'd to 1.97 GHz
- May be something else I can't recall.
Link:
v0.4.3
http://d-h.st/Wqb
Updated to Linux version 3.0.71. Fixed bootanimation support. It's working now.
v0.4.1 (MA06 source)
AGAT_JB_v0.4.1.zip
Added ROW and SIO I/O schedulers. Hotplug governor. Some source clean up.
Upgrade to Linux version 3.0.68
Edits for better deep sleep.
v0.4.0 (MA06 source)
AGAT_JB_v0.4.0.zip
v0.3.2
Small edits, clean up. Added SIO and VR schedulers
AGAT_JB_v0.3.2.zip
v0.3.1
added UC/UV/UC support.
AGAT_JB_v0.3.1.zip
v0.3.0
Updated to Linux version 3.0.48
AGAT_JB_v0.3.0.zip
v0.2.0
Added hotplug support and few governors. Updated to Linux 3.0.35
AGAT_JB_v0.2.0.zip
v0.1.0
AGAT_JB_v0.1.0.zip
If anyone wanna try to compile here link to my github:
https://github.com/agat63/AGAT_JB_kernel
I'll try to keep it up to date as I add features to it.
Enjoy.
reserved just in case I need it.
Thanks AGAT, can't wait to see this thing oc'd:beer: i'm hoping for 2.1GHz fingers crossed...
Can't wait. Your kernel kept me from jumping to the JB leaks until clark44 just released his rom.
Sent from my SPH-L710 using xda premium
Will this work on at&t running dragon Rom base on sprint leak jb?
Sent from my htc_jewel using xda premium
sgs2_1.6 said:
Will this work on at&t running dragon Rom base on sprint leak jb?
Sent from my htc_jewel using xda premium
Click to expand...
Click to collapse
I don't know.
If sprint's rom/kernels running on it this might run as well
But try it at your own risk.
Already yes
tmcwilliam01 said:
Can't wait. Your kernel kept me from jumping to the JB leaks until clark44 just released his rom.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Same here, I was really just waiting for source so I knew a custom kernel was close behind the roms
Version 0.2.0 is up and running,
Added few governors, hotplug support, Updated to linux 3.0.35.
Enjoy.
Does this support custom voltages? If so, what would be the recommended app for adjusting them
Sent from my SPH-L710 using xda app-developers app
JBakey said:
Does this support custom voltages? If so, what would be the recommended app for adjusting them
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
+1?
Sent from my SPH-L710 using Tapatalk 2
I tried ktoonservative and deadline and was getting some weird "hot restarts". Not sure how to explain it.
Compusmurf said:
I tried ktoonservative and deadline and was getting some weird "hot restarts". Not sure how to explain it.
Click to expand...
Click to collapse
Did you clear cache/Dalvik after flashing and then fixing permissions?
Ramondel said:
Did you clear cache/Dalvik after flashing and then fixing permissions?
Click to expand...
Click to collapse
Hey there Ramon... And thanks Agat!
Sent from my SPH-L710 using Tapatalk 2
OC UV Support?
Agat, will you be updating this so that we can OC and UV in the future, I know that this is just the second version on JB but I loved what you did with the ICS version. Thanks in Advanced TIA.
Ramon
Ramondel said:
Did you clear cache/Dalvik after flashing and then fixing permissions?
Click to expand...
Click to collapse
Of course and that's the only governor that exhibits it so far in my testing.
So does this give better battery?
Samsung Galaxy S III
Compusmurf said:
Of course and that's the only governor that exhibits it so far in my testing.
Click to expand...
Click to collapse
Have you tried Ktoonservative and Noop? This is what I am using and it is working fine. I am currently running a stress test using SetCPU and after 126891ms there were no errors from the CPU.
Ramon
Upstreammiami said:
So does this give better battery?
Samsung Galaxy S III
Click to expand...
Click to collapse
Supposed to, please try and report, the more the merrier... Thanks
Sent from my SPH-L710 using Tapatalk 2
Upstreammiami said:
So does this give better battery?
Samsung Galaxy S III
Click to expand...
Click to collapse
It should because if you use the correct governor it will ensure that the second CPU is in sleep mode unless it is needed to process phone requests. I have used Agat's kernel with ICS Roms like FreeGS3 and it has run great.
Ramon