Just wondering if anyone is running setcpu with Synergy and what there setting are. I have never used this app before and am having a hard time finding out how to use it. Any help will be greatly appreciated!
I have it and they say the best thing to do is leave the main screen alone but make one profile. "screen off" set it to the lowest on both maximum and the minimum, and the % to 100.
Sent from my PC36100 using XDA Premium App
Also put ondemand
Sent from my PC36100 using XDA Premium App
I thought I heard set cpu doesnt work on 2.3 sense yet...am I wrong??
Sent from my PC36100
r.storm85 said:
I thought I heard set cpu doesnt work on 2.3 sense yet...am I wrong??
Sent from my PC36100
Click to expand...
Click to collapse
Works on mine
I didn't think it worked on 2.3 either, downloading now....
setcpu wont set the max on the synergy rom (RC2)
EDIT: fixed it.. you need to do perflock.. then you can set the max on synergy
Related
Now I am not blaming the app I am just wondering... everynow and then, when I wake my phone up, it doesn't want to wake up or when I turn it on and try to unlock it freezes... was wondering if anyone else was getting the same thing.
Rooted using the one-click method.
Screen off setting is min 400 max 400.
Sent from my SPH-D700 using XDA App
SetCPU issues
I have been having the same issues myself. Mine was set low to 100min/max: screen off just as a test today and it did that to me a on a few seperate occasions. Not sure why, just ended up battery pulling after 10-15 seconds of no response from the phone.
The cpu is set too low on screen off, go for 245 or so
setcpu does not play nice with r phones. i had problems witth it on every kernal i played with. right now im using the mix up kernal. i used setcpu to 1.2ghz max and 100mhz min. conservative governore. i have yet to find a set up to use while the screen is locked with no issues. what i do know is galaxy s phones only like the conservative setting. maybe a 400mhz max 100mhz min with conservastive governore would work?
Make sure setcpu is set to conservative. I set my lowest to 200mhz and max at 1200. No issues here other than sometimes the notification pull down bar is laggy but it does that stock anyway.
Sent from my SPH-D700 using Tapatalk
I'll try out those settings tomorrow. Thanks guys =)
Any1 know how to get to 1.4 ghz? my max is 1.2 on setCPU and i have voodoo kernel flashed
Try this to hit 1.4.
http://forum.androidcentral.com/epic-4g-roms-hacks/36554-emergency-rom-alert-baked-snack-1-0-a.html
zetterwing said:
Try this to hit 1.4.
http://forum.androidcentral.com/epic-4g-roms-hacks/36554-emergency-rom-alert-baked-snack-1-0-a.html
Click to expand...
Click to collapse
thanx dude i really appreciate it but still only 1.2 for sum reason
II5StarII Swag said:
thanx dude i really appreciate it but still only 1.2 for sum reason
Click to expand...
Click to collapse
There's a kernal that allows you to hit 1.4ghz its the overclocked one from baked snacks
Sent from my SPH-D700 using XDA App
mysteryemotionz said:
There's a kernal that allows you to hit 1.4ghz its the overclocked one from baked snacks
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
thats the rom i switched from dude both only allowed up to 1.2ghz thanxs for replying
II5StarII Swag said:
thats the rom i switched from dude both only allowed up to 1.2ghz thanxs for replying
Click to expand...
Click to collapse
The rom don't control the cpu speeds. The kernal does. You cab run any rom kernal combo you would like. In order to hit the 1.4ghz you want you need to run a kernal that is capable of doing so
Sent from my SPH-D700 using XDA App
Is SetCPU really necessary anymore? If you run a kernel that's not locked into performance mode it will scale on it's own even without SetCPU. I haven't installed it on my Epic yet and when monitoring the phone with SystemPanel I see my CPU go down to 200mhz when idle and scale up when processes are running.
Where is the kernel for 1.4? I have baked snack rom max is 1.2 i know kernel is the part that "controlls" speed but I'm stuck. Any help
Sent from my SPH-D700 using XDA App
specialk0324 said:
Where is the kernel for 1.4? I have baked snack rom max is 1.2 i know kernel is the part that "controlls" speed but I'm stuck. Any help
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Last I knew it was on the baked snacks website
Sent from my SPH-D700 using XDA App
Okay so I disabled the battery tweak and just started using set cpu. My set cpu doesn't have a lot of profiles or options even. I would like to know if someone could point me in the right direction. Thanks in advance.
Sent from my PC36100 using XDA App
The profiles are user defined so if you havent made any, there won't be any to choose from. What are you trying to do?
I'm trying to make more profiles, or smarter ones. I wanna see what everyone else has..
Sent from my PC36100 using XDA App
Honestly, I don't even use profiles anymore, I just let HAVS do its thing. When I did use them, I used screen off @245 and low batt set to 15% @768.
A HAVS kernel?
Sent from my PC36100 using XDA App
jacoballen22 said:
A HAVS kernel?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Yep. When my phone sleeps, it really SLEEPS. I can go all night without losing a single % point.
This site has two profiles setup for SetCPU
http://home.comcast.net/~evobenchers/howtos.html
I'm curious about what kernel to use. Kings#11 sucked, netarchy cfs was bad..and seems like the only one tolerable was stock but I need to have good battery power..I'm currently using ziggy471
Sent from my PC36100 using XDA App
I am getting great battery life with MikFroyo and stock kernel. If you use a HAVS kernel be careful overclocking it, increasing CPU speed with decreased voltage from the HAVS can harm your phone
Sent from my PC36100 using XDA App
I'm getting annoyed with these kernels. So far the only ones that work are ziggy471 and stock 17. I really want to switch to myns two point two rls 5. Problem with that is I don't want to upgrade my radio and lose something. So how do I upgrade without fixing the radios?
Sent from my PC36100 using XDA App
I updated my radios and then downgraded my PRI back to 1.77, its easy and works great.
Sent from my Evo
Alfa testing HDMI
MikFroYo V4.5
HTC #15
Amon's Recovery
Is it ok to use setcpu with a rom like myns warm two point two or is it not necessary?
Sent from my PC36100 using XDA Premium App
Certainly OK, but useful... you'll get a lot of answers. I'll say it can be
Sent from my PC36100 using XDA App
If your happy with the way your phone is running then why mess with it? Setcpu will work with it no problems but if you want to overclock then you will need to change kernels
Sent from my Evo while i should be working
Yeah I wasn't planning on issuing for overclocking, but for underclocking when the screen is off.
Sent from my evo using XDA Premium App
huludical said:
Yeah I wasn't planning on issuing for overclocking, but for underclocking when the screen is off.
Sent from my evo using XDA Premium App
Click to expand...
Click to collapse
SetCPU is useful regardless of ROM or Kernel. The ability to select different profiles and CPU settings based on need or battery life is always nice. I would set my default to "On Demand" and max 998 min 128. Then enable profiles and set it up how you like. I perfer to drop my cpu way down while charging, wayyy down for screen off, and hero style 528 for 50% or less battery.
If you do opt for a different kernel make sure it is one that is listed in Myn's post, otherwise it will bork your Spare Parts app.
ducats said:
SetCPU is useful regardless of ROM or Kernel. The ability to select different profiles and CPU settings based on need or battery life is always nice. I would set my default to "On Demand" and max 998 min 128. Then enable profiles and set it up how you like. I perfer to drop my cpu way down while charging, wayyy down for screen off, and hero style 528 for 50% or less battery.
If you do opt for a different kernel make sure it is one that is listed in Myn's post, otherwise it will bork your Spare Parts app.
Click to expand...
Click to collapse
Ok thanks for the info! I'll play with it and see if I get better battery.
Sent from my evo using XDA Premium App
So I dl acs v5.1. And have also tried the ck rom. My cpu will not over clock over 1.1 ghz. On the v.c. it will let me set it at 1.4 and even the 1.5 from the iap kernal. But it says that the cpu runs at 1.1. Any help would be appreciated. Thank you
Sent from my SPH-D700 using xda premium
In Voltage Control, go to the Voltages tab and scroll down and click the white 1200Mhz icon. That should work for you.
Hey thanks it took a couple of clicks but it worked I got to 1.3. So I guess its time to give the iap kernal another go when my battery is full that is. Lol. Thanks again
Sent from my SPH-D700 using xda premium
had the same problem and fixed
notsosmrtgeek said:
Hey thanks it took a couple of clicks but it worked I got to 1.3. So I guess its time to give the iap kernal another go when my battery is full that is. Lol. Thanks again
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Any time.
/10char
I have searched high and low but can't seem to find a definitive fix that works. I am on Decks 1.3 with SZ 2.21 Cfs havs kernel and am having the issue where I can't always get the screen to turn on right away. Sometimes it takes 3 or 4 pushes before it will actually turn on. I have tried different kernels, changing the minimum frequency, screen on/off animation change, etc. Nothing seems to be a permanent fix because its still happening. Does anyone know of a real fix that works?
Sent from my PC36100 using XDA App
legasus233 said:
I have searched high and low but can't seem to find a definitive fix that works. I am on Decks 1.3 with SZ 2.21 Cfs havs kernel and am having the issue where I can't always get the screen to turn on right away. Sometimes it takes 3 or 4 pushes before it will actually turn on. I have tried different kernels, changing the minimum frequency, screen on/off animation change, etc. Nothing seems to be a permanent fix because its still happening. Does anyone know of a real fix that works?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Tiatmat 3.3.7 (LEE) Kernal smartass oops I am not calling you a smartass... I ment the smartass governor
Tiamat 4.1.0 no issues
Support TrevE !!
jayshocka said:
Tiatmat 3.3.7 (LEE) Kernal smartass oops I am not calling you a smartass... I ment the smartass governor
Click to expand...
Click to collapse
I have 1.3D
Lee
And screen on profile and still get screen on lag. I just don't notice it much now
Sent from my PC36100 using xda premium
I have the same issue. I'm using deck's 1.3, tried SZ but Bluetooth wouldn't work. now on tiamat 4.1.0. Tried smartass v2, conservative, and interactive with the same issue.
I hit the button and I see the lights come on for the soft keys but the screen never lights up. Sometimes if I wait I will see the screen flash on then it'll well turn off and lock.
Sent from my PC36100 using XDA App
jabq said:
I have the same issue. I'm using deck's 1.3, tried SZ but Bluetooth wouldn't work. now on tiamat 4.1.0. Tried smartass v2, conservative, and interactive with the same issue.
I hit the button and I see the lights come on for the soft keys but the screen never lights up. Sometimes if I wait I will see the screen flash on then it'll well turn off and lock.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
1.3d LEE smartass 128/537. Car o dope tweaks no screen wake issues
I don't use any additional profiles ... just sharing my experience I hope some one may benifit
Sent from my PC36100 using XDA App
I did the car o dope tweaks and the lag seems to be gone....for now anyway.. phone feels much snappier too!
Sent from my PC36100 using XDA App
legasus233 said:
I did the car o dope tweaks and the lag seems to be gone....for now anyway.. phone feels much snappier too!
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Still running good?
PS. Carodope tweak plus screen transition set to fast in spare parts=warp speed mind melt
Sent from my PC36100 using XDA App
It still does it but not nearly as often. Thanks for the advice! Ill give it a shot
Sent from my PC36100 using XDA App
legasus233 said:
It still does it but not nearly as often. Thanks for the advice! Ill give it a shot
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
what is your CPU set at? Are you using any other profiles
Sent from my PC36100 using XDA App