[Q] 3g connection problem (originally Korean Defy phone, i'm using it in US now) - Defy General

I've used my Defy in Korea and there was no problem.
Yesterday I enrolled T-mobile prepaid plan(Monthly 4G $50 and changed my SIM card.
Talking and Texting is working but 3g connection isn't working.
On the status bar, there is "G" sign which means GPRS connection (I found it in google)
When I used Defy in Korea, there was "3G" sign or "H" sign which means 3G/HSDPA(much faster than GPRS)
I think my Defy is only taking GSM(GPRS) frequency.....
I setup "*#*#4636#*#* -> Phone information -> WCDMA preferred or WCDMA only" but still not working.
Now I'm about to try to find a US ROM and flash it... Will it be helpful??
I don't want to lose all the apps & settings........ but if it fix my problem, I'll try it.
What do you think about my idea??

You don't need to flash a new ROM
Your problem is quite common because your ROM (Koren) uses a different baseband. The baseband for US 3G networks is different. Just download the Defy Baseband switcher app from here:http://forum.xda-developers.com/showthread.php?t=1052745 and apply a Baseband for US. This should fix your problem. So, you won't have to loose your installed apps and settings.

Related

[Q] help!3G connectivity has gone from my phone

my phone can not connect to 3G networks in most of our city, while it used to work just fine in these same places. at first i thought there must be something wrong with the carrier's base stations. but today i tested my SIM card on another LU6200(Korean version of Nitro HD) and it works perfectly both on 3G and 2g networks on that phone. but when i put it back into my phone, it can only get 2G signal. if i set the Preferred Network Type to WCDMA ONLY, it got no signal with just a cross on the signal bar. i have to put it back into GSM ONLY mode to receive signal.if i go out, i can get partial 3G connectivity here and there, but not consistently. sometimes even if i have full 3G bar signals on the status bar, i can not make calls or connect to the internet.i've got this problem probably after i tried to forcibly go into the Phone Info menu.i got repetitive " the process com.android.phone has stopped unexpectedly" promps , and i just ignored it and tried again. now ,2 options are missing from the menu, LTE/WCDMA/GSM and LTE Global.in place of them, it's UNKNOWN. i already tried flashing KDZ package of no avail. Does this mean a hardware malfucntion or software glitch?Please help!Thank you in advance
No one can answer?
freefall12 said:
No one can answer?
Click to expand...
Click to collapse
Ask att store for a different sim card i had lte issues and new sim card helped try that
LG NITRO-N XDA APP
Well you do HAVE GSM only selected. THATS 2G(EDGE)
for 3G you would need to select WCDMA
hyelton said:
Well you do HAVE GSM only selected. THATS 2G(EDGE)
for 3G you would need to select WCDMA
Click to expand...
Click to collapse
^^^So true
LG NITRO-N XDA APP
no, if i select wcdma, i got no signal.it should be hardware problem

[Q] Nor changing from Edge to 3G when available

Hi Guys ..
i have a new note2 ALJ1 baseband, ALJ3 build .. stock Thailand firmware.. rooted then stock kernel put back. no updates showing on kies.
MY phone is not changing from edge to 3G/H++ automatically.
Thailand has sketchy 3g coverage so changes a lot.
when i am in an area that has 3g activating data the phone seems to prefer going to 2g/edge instead of 3g ..
and the only way o seem to be able to use 3g is by changing network mode from auto to WCDMA ... then having to remember to change back after i finish internet usage or i will not even get a phone reception when i get out of a 3g area
its not a sim card problem i do not think .. i had an S2 then a S3 with the same card and did not have this problem
I've met one other person having the same issue locally
i've tried *#197328640# and aquisition order is umts-gsm.. cannot change as it always says invalid choice
is there a hidden settings menu perhaps for setting preferences on priority perhaps ?

[Q] Why Does my Korean N7100 think I'm roaming and not connect to mobile internet?

I bought my n7100 on taobao here in China, and it's a Korean version. I put my China Mobile sim card in, and it makes and receives calls, and text messages and can use wifi with no problem.
The only thing is the mobile data doesn't work. I rooted and tried tweakker, and HiNet, to reset my APN and MMS settings, but that didn't work. My phone still thinks I'm roaming.. it displays
this message "Data Roaming, You have lost data connectivity because you let your home network with data roaming turned off".
I've also tried updating the APN and MMS settings manualy with information i've found on the web.
I've googled and searched this forum and I can't find much. I thought it would be an easy APN settings fix but it seems not to be...
I took my phone in to the local China Mobile store they couldn't fix it. I took it to a local android expert here and they didn't know what to do.
Any ideas would be greatly appreciated.
If you bought a Korean Note 2, you don't (shouldn't) have an N7100. I also purchased one through Taobao.
You should have an SHV-E250S, E250L, or E250K. Which one do you have? Check the baseband version under Settings > About device page.
No matter what, you're going to be limited to 2G only with China Mobile.
You're right, It's SHV-E250S, and I'm fine using the 2g in China on China mobile, but I'd just like to know how..any help?
Baseband Version is E-250SKSVLJK
Try removing all modifications to your APN settings.
Next, go into Settings > More settings > Mobile networks > Network mode and change it to GSM only. Also make sure that Data roaming is not selected. Run a new scan for network operators while you're in there to refresh your APN settings to the right ones.
In data network mode I only have 2 options "3g only" or "LTE Preferred" I have it on 3g only. I have now unchecked data roaming, but I don't see any place to scan for network operators. I have included a few screenshots here, sorry i don't know how to insert them.. http://tinypic.com/r/2198djn/6 http://tinypic.com/r/24dhfmx/6 http://tinypic.com/r/2zof98w/6
Now it's obvious why you don't have data. Is this the stock Korean ROM? Are you rooted?
I can point you to a decent ROM that will fix all of this, provided you have the patience to fix it. It's relatively easy.
Yes it seems to be the stock Korean ROM. I am rooted using http://forum.xda-developers.com/showpost.php?p=31801060&postcount=2 I'm more than willing to flash another rom. I've put about 20 hours into this so far, I imagine I can muster enough patience to finish it
Once they give us a damn Korean Note II section, this kind of information will be a lot easier to find.
Try this ROM for now, it's the one I've been using for a few weeks and I love it.
Link source: http://koxda.com/thread-98683-1-1.html
ROM Download: http://pan.baidu.com/share/link?shareid=149494&uk=3355956772
Password: koxda.com
Thanks a lot the rom (715mb) is downloading now, I have tried to flash ROM's on my old galaxy nexus, and on this note II, but I never succeeded, can you please link me to a good guide, on how to flash this rom? thanks.
Odin is included in the download. If you're using Windows 7 you may or may not have the drivers for the phone, and can grab them out of the All-in-one Toolkit. Just installing the toolkit should install the drivers necessary.
http://forum.xda-developers.com/showthread.php?t=1923956
The ROM you're downloading has two files and two pictures, as well. Open the pictures and follow along. All you have to do is click two buttons, select two files, then hit start. It WILL wipe your phone.
I installed that rom you suggested, I went into settings and did GSM only, and had it automatically find my network (china mobile) selected it, rebooted, and still it says i'm roaming so there is no connectivity... any more ideas?
Can you try somebody else's SIM?
There's no reason you should not be getting service unless something is not right with your SIM or phone.
I installed the rom you suggested, i went into settings and made it GSM only, also had it automatically correctly locate my network (china mobile) and it said "registered on network".. but it still isn't working, same problem, it says no connectivity cus i'm roaming.. any ideas now?
my gf will be home from work in a couple hours, I can try her sim card then.. my sim card was cut by me for my old iPhone.. is it possible or likely that the phone can still make and receive calls, but that somehow data connectivity was affected by me cutting the card? also one guy at the phone fixing store tried his sim card (from another company) and internet worked fine he said..
dadroidda said:
I installed the rom you suggested, i went into settings and made it GSM only, also had it automatically correctly locate my network (china mobile) and it said "registered on network".. but it still isn't working, same problem, it says no connectivity cus i'm roaming.. any ideas now?
Click to expand...
Click to collapse
China mobile have various sim plans, from local to province to national. Are you using the sim in the same city in which you bought it? If not and you don't have a national plan, it could be why the phone is showing roaming. In China going from one province to another is already considered roaming unless you have a national plan. This is from my experience back 2 years ago. Also, you best check at a China mobile shop if you have data activated, gprs/edge is not activated by default, you need to ask them to do it.
I would advise you to switch to China unicom as they have 3g/hspa which is much faster than china mobile.
Sent from my GT-N7105 using xda premium
For clarfication, I am in Hainan, and the card is from hainan. I use the same sim card in my galaxy nexus without any problem. I tried my gf's card just now, it didn't say any problem with connectivity, and did not display roaming.. And it shows the G symbol (for 2 or 3 G I assume), and has up and down arrows next to it.. but it doesn't actually work for browsing the web or using apps over the data network.. I even reset all the APN settings and let it automatically find the China Mobile network, but it didn't help.. what if I try to set the APN settings manualy? and any other ideas??
Showing the G symbol is GPRS, which is 2G. You will not get 3G on the N7100, N7105, or Korean model Note 2 on China Mobile.
Sounds like you need a new SIM card. You can try to set the APN manually to make the data work with hers. I've never had to set an APN manually and I've used many phones here with all 3 carriers, so it's a bit odd to me. No clue why your card doesn't work, but since hers is working fine, it's definitely not your phone.
For the record, her card displayed G, but even after messing with settings, I couldn't get it to have working data network..
Today I bought a new card, and had it officially cut to size, put it in the note II and it's still telling me no data connectivity due to i'm roaming.. i'm so frustrated
edit: after restarting a few times and trying to automatically make it register on china mobile .. it worked on the 4th attempt.. it still displays data roaming, and I had to enable data roaming... but now it works, even though it says i'm roaming?? wtf
Ive the same problem with my Korean galaxy note 2 all voice service work perfect but when I tried to turn on data it says insert Usim Card to access network please help

Can not connect to 4G/3G.

Hello there, I'm in need of your help again.
My SGH-M919 has a problem, it cannot connect to 3G/LTE (Not even EDGE). My carrier uses the 850 mHz band for GSM and 1900 mHz for UMTS, so the phone should be able to use them. The thing is, it doesn't. It only connects to GPRS and the signal is very erratic and weak (Usually 2-3 bars). Sometimes I get SMSs from my carrier saying that I missed like 5 calls when my phone never rang once. I live in a zone with good 3G coverage, so it's not the signal.
I'm currently rooted on Android 4.4.4 (NH7). I already tried selecting "1900 WCDMA" in the *#2263# service menu but that only causes the phone to lose all the signal (And it's a problem to change it back, without signal the service menu doesn't work and I cannot change the Network Mode in Settings).
I've tried to select "WCDMA only" mode before, but my signal just goes to zero (The circle with the slash) before changing back to "LTE/WCDMA/GSM (Auto connect)" automatically.
I also cannot use the Network Operators option. Using "Search now" makes it search for a few seconds before showing the message "Error while searching for networks". The "Select automatically" one shows the message "Unable to connect. Try later" and then connects back to my carrier (Movistar)
My APNs are configured (They did it themselves when I inserted the SIM, but I've configured them manually before). The SIM card works, I tried it in another phone and it got 3G immediately, I also tried another SIM card on the GS4, but the result was the same. Someone told me to upgrade to the latest firmware (NK2) while someone else told me to flash the MDL modem. (Is that even possible? I read something about KNOX blocking all downgrades after 4.3).
Since I couldn't find any direct solution to the problem, I'm recurring to you.
Thanks.
P.S: I didn't change the LTE Band Preference option in the Service Menu because the last time someone messed with it, my IMEI/Baseband went completely nuts, I thought the EFS got corrupted, but they magically appeared everytime I enabled the Airplane Mode (So I was able to select Automatic in the ServiceMenu and they got fixed). Also, I don't live in a LTE area although once during a very strong thunderstorm, I got 4G for a few minutes before going back to G).
*bump*
Any ideas?
Did you put a check mark in data roaming?
Shortbus-Driver said:
Did you put a check mark in data roaming?
Click to expand...
Click to collapse
I've tried with and without it, it doesn't make a difference anyway.
Does it show you have an ìmei # other than all zeros?
Don't post it just a yes or no.
Shortbus-Driver said:
Does it show you have an ìmei # other than all zeros?
Don't post it just a yes or no.
Click to expand...
Click to collapse
My IMEI is fine, the phone connects to the carrier network but it stays on GPRS (and the signal is always dropping)
Update to full NK2 firmware and see if that will fix it
serio22 said:
Update to full NK2 firmware and see if that will fix it
Click to expand...
Click to collapse
I'll try that later. Will I have to re-root and re-install TWRP after flashing NK2?
I have a similar problem with my M919 on the Tmobile network. Using the *#2263# menu I can not get mine to work on WCDMA (4G) either. I can chose GSM /LTE only and my phone works normally but no 4G signal. If I chose WCDMA I get no signal. I can see it trying to connect and immediately dropping the signal. If I choose any option with WCDMA included it has erratic signal and will lose the signal most of the time when I try to make a call. So basically I have the choices of GSM only or GSM/LTE only. Before I discovered the secret menu I was stuck with GSM only in the phone's settings. This has been going on for months. Tmobile changed my SIM card and it didn't help. I've rooted and unrooted my phone (using autoroot) and even tried different modems (even worse signals) and now am back to stock rooted NK2 firmware and modem. I have given up and decided to get another phone (not an S4). My wife's S3 gets great 4G signals in the same location by the way. I wonder if anyone knows why our phones can't use 4G. I am beginning to think it's a hardware problem but I'm way out of warranty on mine.

S4 Mini 19190 stuck on EDGE network

Hello everyone , I'm from Morocco and I need help with my device's Mobile Data.
To begin with, I've got an S4 mini 19190 3G variant, I installed a cyanogenmod ROM, it's a cm13 version, android 6.0.1. I'm using a TWRP recovery.
I've had a cm12.1 before and had the same exact problem: I'm always stuck on EDGE network .
I've gone to the settings, and made sure to choose 3G in the preffered network type.
My APN setting are correctly configured.
I've tried forcing the device to choose WCDMA by going to Phone Info. Choosing the WCDMA option disables Mobile Data and calls, with emergency calls enabled only.
Choosing the "WCDMA preffered" option doesn't change anything, it's still on EDGE.
I've looked for a solution, and noticed that some people had a problem with IMEI number, I've checked it, it's the same as the one on the back of the phone.
Anyone got any idea on how to fix this? Thank you .
Are you sure that your area has any WCDMA connection? Can you check with another phone?
Yes, I've already had H+ connection on the same phone but with a different version of the ROM, and my father has H+ working perfectly on his SGS5. I didn't try with another phone, I'll try and see if the problem comes from the SIM.
Omg Thank you! Why didn't I think of that! (How stupid of me) I tried my SIM card on a different phone (that had H+ working on it) and it went on EDGE network, and I chose WCDMA only and the connection was lost. There is a problem with my SIM card, I'm going to contact my service provider to fix this
Thanks Again!!

Categories

Resources