Hi all,
Today i was trying to flash the radio for my HTC wildfire
version: 13.55.55.2424H_3.35.20.10 (same as the one on my phone now)
What i have done:
1-renamed the radio to update.zip and put it on SD root
2- booted in recovery mode (CWM 4.0.1)
3- chosen install zip from sd card
but i got this message:
Installing update..
Amend scripting ( update.script) is no longer supported.
( some sentences including CWM 3 and ginger bread) don't remember them exactly
Installation aborted.
I rebooted phone and thanks to God it's working OK, communications OK.
What i have done wrong?
help will be appreciated
thanks in advance.
It needs Clockworkmod Recovery 2.x. So, you can get that from within ROM Manager App.
- Open ROM Manager
- Select Install Clockworkmod Recovery
- This will install v2.5.0.7 on your SDCard (It wont touch your v4.x)
- Then select Reboot into Recovery from within ROM Manager.
- This will start Clockworkmod 2.6.0.7, then flash the radio as normal.
Alternatively, get this attachment:
http://forum.xda-developers.com/attachment.php?attachmentid=662193&d=1311319218
Flash in in Clockworkmod 4.0.1, it will give you temporary 2.5.0.7, then proceed as normal.
Thanks a lot 3xeno
i have done the first on and it worked
but
when i installed the updat.zip
some lines was showed but it was very quick i couldn't read them
but the process took about 5 seconds or maybe less
is that normal??
how can i know that i have flashed the radio succefuly?
the phone is working OK.
Yes, its normal. When you follow the second procedure, it gives you temporary 2.5.0.7.
I hope you followed only one of the procedures though. (Either go via the ROM Manager App way, or go via the update1.zip way, not both)
When you flash a Radio, it says "The Radio will install on Reboot". Then, you select "Reboot System Now" in Clockworkmod, and it will reboot your phone, and it will state "Writing Radio Image". This process takes some time, after which your phone reboots again and starts normally. When this happens, you can be sure you have reflashed the radio properly.
i followed the first
i have reeboted into CWM 2.5 ( green color)
then i flash the update.zip by install zip from sd card
it shows quick lines
and i don't see this "The Radio will install on Reboot"
the back to recovery menu
i choose reboot system now
the phone reboot as normal without this "Writing Radio Image"
any thing am missing?
Don't flash the update.zip in Clockworkmod 2.5.0.7 (Green Text). The update.zip is an alternative to be flashed in Clockworkmod 3.x/4.x (Orange text) which will reboot your system in Clockworkmod 2.5.0.7. (ie - It is to be used only if you didn't use the ROM Manager method. Since you have installed Clockworkmod 2.5 using ROM Manager, you can delete the update.zip, you no longer need it)
Once you get to Clockworkmod 2.5.0.7, Flash the Radio's Zip using the same procedure. (Install Zip from SDCard > Select Radio Zip file). To reiterate, theres no need for update.zip once you are in Clockworkmod 2.5
Thanks a million 3xeno
flashed the radio Successfully
what i was doing wrong that i have renamed the radio zip file to update.zip
method that i have done for anybody hwo wants to do that (thanks to 3xeno):
1- put the radio file as it is on SD root (don't change the name of zip file)
2- go to rom manger and choose flash clockworkmod recovery
3- from rom manger choose reboot into recovery
(will reboot in CWM 2.5) green text
4- choose install zip from sd card
5- press go back (back button won't work) go to the bottom of menu and you will find the ++back++
6- choose reboot system now and wait til it finish.
I don't think changing of filename from radio.zip to update.zip will affect installation of radio (as long as you haven't extracted the zip).
But what happened is (I guess) ---
You are changing the radio.zip to update.zip and kept it at the root of sdcard. Then if you open Rom manager and flash recovery, the update.zip related to radio will be overwritten by cwm2.x update.zip . And vice versa if you have flashed Rom manager cwm2.x first and then copied radio update.zip to root of sdcard.
So basically one of the needed things are missing ( = being overwritten) which interfere with the process. Anyway nice that you made it.
Sent from my HTC Wildfire using XDA App
Related
If you have Unrevoked 3 installed:
1. Download stock Evo Recovery image (Can't find it anywhere... EVO Stock Recovery? - xda-developers)
2. Place the file in root of SD card and reboot into HBOOT (volume down/power button)
3. Do the update that HBOOT asks (vol. up for YES)
4. Reboot
5. Once rebooted, download OTA and install (should work now)
6. Once install finishes successfully you can reinstall a custom recovery using the same method (a list of them are here: public:forever [RootWiki])
7. Once you have a custom recovery back, you will need to reinstall Superuser as an update.zip through recovery ([APP] Superuser 2.3.6.1 - Now on the Market [2010-09-05] - xda-developers)
8. Reboot and enjoy!
Well I followed the instructions and the update went through... HOWEVER I have now lost root.... Help please.
EDIT: S-OFF does appear when I boot into the bootloader...
If you have S-Off, than you have not lost root.
YOu probably just lost your recovery, and you need to reflash it.
This tutorial from tws101 worked for me (I can't post a link as a new user):
"This guide will allow you to install the new OTA 3.29.651.5 when you have clockwork installed and will guide you into re-rooting the phone afterwards. (This does NOT wipe your data)
I am sorry if someone already posted this.
Requirements
1. Froyo 2.2 version 3.26.651.6 (Stock)
2. Clockwork
3. S-OFF
Files to Download (If you have a file manager on your phone you can just direct download them with the EVOs browser)
1. OTA_Supersonic_3.29.651.5 This is the new OTA update
2. ClockworkMod recovery for EVO 4G Clockwork (I know you already have it. This is to reinstall it)
3. su-2.3.6.1-ef-signed.zip Superuser (This is also to reinstall)
Step one
Place OTA_Supersonic_3.29.651.5 on your SD cards root folder. Power off and reboot holding Volume down. Once the bootloader is up goto recovery so clockwork loads up. Choose apply zip from sd card. Choose select zip on sd card. You will see the OTA file on the list flash it. Just wait for it to install it will reboot the phone show a progress bar reboot again they show a percentage etc it takes a few minutes.
Now you have the update installed, but the update removed clockwork and root.
Step two
Place ClockworkMod recovery for EVO 4G on your sd card root folder. Power off and reboot holding Volume down. The bootloader will scan the new will and ask you to press Volume up to install. Install it.
Now you have clockwork installed again. Please remove the clockwork file from the root of your SD card before going to step 3.
Step Three
Place su-2.3.6.1-ef-signed.zip on the SD cards root folder. Power off and reboot holding Volume down. Once the bootloader is up goto recovery so clockwork loads up. Choose apply zip from sd card. Choose select zip on sd card. You will see the SU file on the list flash it.
Now you are updated and rerooted. (I have been told it is possible to just rerun unrevoked instead of doing step 2 and 3. I did not test that method. I am simply showing a different method.)
Update
I am now getting 53 FPS with FPS 2D"
Thanks tws101
acron1 said:
This tutorial from tws101 worked for me (I can't post a link as a new user):
"This guide will allow you to install the new OTA 3.29.651.5 when you have clockwork installed and will guide you into re-rooting the phone afterwards. (This does NOT wipe your data)
I am sorry if someone already posted this.
Requirements
1. Froyo 2.2 version 3.26.651.6 (Stock)
2. Clockwork
3. S-OFF
Files to Download (If you have a file manager on your phone you can just direct download them with the EVOs browser)
1. OTA_Supersonic_3.29.651.5 This is the new OTA update
2. ClockworkMod recovery for EVO 4G Clockwork (I know you already have it. This is to reinstall it)
3. su-2.3.6.1-ef-signed.zip Superuser (This is also to reinstall)
Step one
Place OTA_Supersonic_3.29.651.5 on your SD cards root folder. Power off and reboot holding Volume down. Once the bootloader is up goto recovery so clockwork loads up. Choose apply zip from sd card. Choose select zip on sd card. You will see the OTA file on the list flash it. Just wait for it to install it will reboot the phone show a progress bar reboot again they show a percentage etc it takes a few minutes.
Now you have the update installed, but the update removed clockwork and root.
Step two
Place ClockworkMod recovery for EVO 4G on your sd card root folder. Power off and reboot holding Volume down. The bootloader will scan the new will and ask you to press Volume up to install. Install it.
Now you have clockwork installed again. Please remove the clockwork file from the root of your SD card before going to step 3.
Step Three
Place su-2.3.6.1-ef-signed.zip on the SD cards root folder. Power off and reboot holding Volume down. Once the bootloader is up goto recovery so clockwork loads up. Choose apply zip from sd card. Choose select zip on sd card. You will see the SU file on the list flash it.
Now you are updated and rerooted. (I have been told it is possible to just rerun unrevoked instead of doing step 2 and 3. I did not test that method. I am simply showing a different method.)
Update
I am now getting 53 FPS with FPS 2D"
Thanks tws101
Click to expand...
Click to collapse
couldnt u just use the new enrevoked 3.3 and just run through the process because i manually got the fps update after i got my root and i lost my root acess tell me if im wrong please
allenivers0n3 said:
couldnt u just use the new enrevoked 3.3 and just run through the process because i manually got the fps update after i got my root and i lost my root acess tell me if im wrong please
Click to expand...
Click to collapse
Dude the thread is older than your subscription!
Sent from my PC36100 using Tapatalk
allenivers0n3 said:
couldnt u just use the new enrevoked 3.3 and just run through the process because i manually got the fps update after i got my root and i lost my root acess tell me if im wrong please
Click to expand...
Click to collapse
You dont take updates once you are rooted, just flash a rooted ROM
First of all - Once you have rooted your phone - NEVER NEVER NEVER NEVER NEVER do an OTA update from sprint............
Not sure what your software version is or your hBoot, but if you have 2.02 hboot and 3.30 software, then you can do it the way I did...
having said that - You have not lost root, S-Off = Root, you just lost your recovery... all you need to do is flash a new custom recovery. I use Amon_Ra, but clockwork will work as well... what ever your preferance is...
I cant find the amon_ra that I used, so here is the new CW (attachment 1) - download it - rename it to just (all CAPS except extention!!) "PC36IMG.zip" - Then save it to the root of your SD card. Also save attachment 2 to the root of your SD card.
Boot into hBoot, it will scan the SD card for the PC36IMG.zip - when it asks to do update - click yes... After update completes it will ask to reboot - click NO, then scroll down to flash the superuser app (2nd attachment), I forget what exactly it says but its some thing like "flash from SDcard" or some thing like that...
after you flash the SU.apk, then reboot and if all is good - download ROM manger and flash the Amon_Ra recovery (3rd attachment) and make a NAND backup with Amon_Ra first - cause I'll be honest - I used the CWmod first and I had a bunch of Force Close issues after I did a NAND backup with CW...
Good luck!
I installed HTC Sync then, unistalled (keeping the drivers).
I installed the HBOOT modified drivers in device manager. it now says:
"Android device"
|
"My HTC"
I ran unrevoked3, successful, done. I did one click only and let it run.
I then downloaded Wildpuzzle 2.2 froyo (kept it zipped copied it to SDcard).
I powered down phone then pressed volDown and power together to go to boot menu.
my boot menu looks different to that of a video I saw:
FASTBOOT
RECOVERY
CLEAR STORAGE
SIMLOCK
shouldn't it look like this?:
FASTBOOT
RECOVERY
CLEAR STORAGE
SIMLOCK
HBOOT USB
note- it doesn't make a difference if my wildfire is plugged in to the pc, or if I'm running unrevoked at this point.
I wait for the update scan check thing, then I go down one to RECOVERY (If I'm running unrevoked at this point communication is lost) this takes me to ClockworkMod Recovery v (black screen, green text).
I choose "-wipe data/factory re" then "-install zip from sdc" choose my zip blaa blaa...
I see the install bar and it does it in a second, completed.
- reboot system now
I wait till phone is ready (have a sandwich very nice)
check menu/settings/about phone/software information.... still says:
Firmware version
2.1-update 1
Ahhhhhhhhh
I keep trying for three days different roms, typing here is last resort by papa roach!
HOW . DO . THIS . ?
edit your post and add a title.. please be more observant..
I hope you are not selecting the update.zip under the sdcard which might be the clockworkmod recovery image (rom manager based recovery installation keeps it there). Since clockworkmod recovery has that as an option above the zip file selection, it is a possibility (especially based on the sped of the update)
hackworks said:
I hope you are not selecting the update.zip under the sdcard which might be the clockworkmod recovery image (rom manager based recovery installation keeps it there). Since clockworkmod recovery has that as an option above the zip file selection, it is a possibility (especially based on the sped of the update)
Click to expand...
Click to collapse
No I'm not selecting update.zip
i have this same problem
please guide me ...i have this same problem...without hboot usb option in the boot menu...how can i install the hboot drivers?
u successfully rooted ur device. but have u installed clockworkmod recovery. i doubt this. and u also need to update the clockwork mod recovery. and then only u can install custom roms. dont forget to wipe all data and clear cache.
Hi, I have a S-Off'd Wildfire (done with XTC-Clip) in version 2.2.1 and I asked a user from this forum how could I root. He answered me with this message:
Code:
hi poinu glad you managed S-off now you can put on any rom you want.
first you must get a custom recovery on your machine I use ClockworkMod 3.0.0.6
this should be fine to flash cyanogenmod7.
here is the file to it (http ://www . mediafire . com /?i09yp4r7odhlzws)
put this PC49IMG.zip on the root of your sd card. (not in a folder)
put the cyanogenmod update zip also on your sd card.
Reboot your phone into Hboot Mode by pressing Volume Down and Power.
It will now ask if you want to update the firmware select Volume Up for Yes.
wenn its done remove thePC49IMG.zip from your sd card.
Reboot your phone into Hboot Mode again.
it will look for the PC49IMG.zip again let that finish and ignore.
Then go with volume down to recovery and push power button, clockwordmod will start.
Do a wipe cache partition, wipe data/factory reset and under advanced wipe Dalvik cache.
go to install zip from sdcard / choose zip from sd card and choose your cyanogen mod update zip and install.
reboot wen finished don't worry if it takes some time first reboot always is slower.
hope i helped you enjoy your mod.
kind regards ab65
I've downloaded the PC49IMG.zip file and copied at the root next to the cm7.zip file (picture: http : //i55 . tinypic . com/ egai5s. png) but when I enter the HBOOT and looks for the PC49IMG.zip file, it finds nothing (and yes, the file is PC49IMG.zip not PC49IMG.zip.zip, I've already checked this )
I don`t know what I have done wrong (I have done nearly anything!) any ideas?
Thank you very much for having a look on the threat
here is what i suggest simply,
***** Ur memory card must be formatted with fat32 partition before doing this.......
go to this link and download the attached file at the bottom PC49IMG.ZIP
http://forum.xda-developers.com/showpost.php?p=12188132&postcount=15
Since security flag is turned of (by xtc clip) , the recovery partition is no longer protected. U can install custom recovery without any exploits. That downloaded PC49IMG.ZIP file is nothing but "ClockworkMod Custom Recovery". Put it in the root of the memory card (fat32). Then go to hboot menu. It definately finds the file and prompts u to install. Go with it. At the end u will have custom recovery.
then u can install custom roms. Custom roms will be packed in zip files and can be installed from recovery menu. Its not needed to put the custom rom zip file only in the root of memory card. And the most important thing is, remember to clear data/factory reset and clear cache (both done frm recovery menu) before installing a custom rom. Thats all
Oh god, i didn`t know that.... succesfully done
but now... there's another problem, I installed the CyanogenMod7 and there are some things that I pretty dislike and I would like to install another ROM I have (it's a 2.2.1 rooted ROM) and I tried to do what I did to install the CM7 but when I installed it from the recovery this error message appeared:
"Installing update...
Amend scripting (update-script) is no longer supported.
Amend scripting was deprecated by Google in Android 1.5. It was necessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread based recovery.
Please switch to Edify scripting (updater-script and update-binary) to create working update zip packages.
Installation aborted."
Is it really possible to root this ROM or do I have to stay in the CM7? :S
Any suggestion? Thank you very much for the support
poinu said:
Oh god, i didn`t know that.... succesfully done
but now... there's another problem, I installed the CyanogenMod7 and there are some things that I pretty dislike and I would like to install another ROM I have (it's a 2.2.1 rooted ROM) and I tried to do what I did to install the CM7 but when I installed it from the recovery this error message appeared:
"Installing update...
Amend scripting (update-script) is no longer supported.
Amend scripting was deprecated by Google in Android 1.5. It was necessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread based recovery.
Please switch to Edify scripting (updater-script and update-binary) to create working update zip packages.
Installation aborted."
Is it really possible to root this ROM or do I have to stay in the CM7? :S
Any suggestion? Thank you very much for the support
Click to expand...
Click to collapse
CLockworkmod 3 is a must for the gingerbread CM7 roms.
And clockworkmod3 recovery will not support "amend - scripting"
What u need to do is, to install the CM7 custom rom. Then install "Rom Manager" from market. Then use a different version of clockworkmod (downgrade to 2.5 version or try different versions). Then reboot to recovery from Rom manager itself. Then try to install the 2.2.1 rooted rom. It should work. If u have any issues with installing custom roms, then try different version of clockworkmod recovery (from Rom Manager). That's all.
explanation: http://forum.xda-developers.com/showthread.php?t=897026
it surely worked, thank you very much
I done the Alpharev s-off method but now when I try to install CM7 from CWM 3.0.0.6 it get stuck on "Installing update"
Any ideas?
diarmaid said:
I done the Alpharev s-off method but now when I try to install CM7 from CWM 3.0.0.6 it get stuck on "Installing update"
Any ideas?
Click to expand...
Click to collapse
what recovery do you use? did you dowloaded the zip correctly?
I upgraded to cwm4 and it worked perfectly.
That was a close one, it was a birthday present for the missus and i finally got it working on the morning of the birthday
Sent from my HTC Desire S using XDA App
Hi,
There are a lot of similar problems on this forum, but after trying a lot i still can't get my DHD fixed... I feel stupid atm..
It happened when trying to install the Sensation v2.1 rom (http://forum.xda-developers.com/showthread.php?t=1131063)
I followed the guide from this page: http://forum.xda-developers.com/showthread.php?t=964996
I started with making the phone Radio S-OFF and ENG S-OFF. This was succesfull.
BELOW are the steps from the flashing guide, the BOLD marked part shows the part it went wrong..
- Tell any people that might call you during the next 10-15 minutes to not worry
- Connect your phone using "Disk drive" to the computer.
- Copy both your full-wipe-1-3.zip and your rom zip file to your SD Card
- Make sure you copied them correctly
- Check again because once you full wipe, you won't have a rom.
- Disconnect your phone from your computer
- Install and open Rom Manager from the market
- Tap on Flash ClockworkMod Recovery
- Wait for it to download (yes, you need a wi-fi or data connection)
- After it is done press "Reboot into recovery"
- If you get an icon with a phone and an exclamation mark in a triangle, remove the battery from your phone, reboot and then flash the clockworkmod recovery again
- Once you are in the clockwork mod recovery, you may use the volume keys as directional keys (up and down) and the power button may be used as Enter.
- I recommend you do a nandroid back-up. You must have at least 1 gb of free space.
- Select "Install Zip from sdcard"
- Select "Choose zip from sdcard"
- Select full-wipe-1-3.zip (It's right under those folders)
- Confirm by selecting the Yes option in between those "NO"s
- Wait for it to finish
- DO NOT REBOOT!!! In case you were not aware, you now have no rom installed
- Once again select "Install Zip from sdcard"
- Select "Choose zip from sdcard"
- Select your rom zip file
- Confirm your selection (just like with the wipe)
- Wait for it to finish
- Please reboot from the recovery menu and flash nothing else before you have rebooted
- Pop a champagne bottle, because it's done.
I was not able to select a file from the SDcard.. It kept saying "SDCARD NOT MOUNTED"
After that ive done some more:
- Format the card with SDFormatter and i've also tried in Clockworkmod itself but also there it said the SDcard wasn't mounted..
I've also read about a USB brick or something.. But to fix the usb brick u needed to put a file, update.zip, on your SDcard... which i couldnt load ofcourse.
At the moment i'm really frustrated because my DHD just wont start!!
It has no ROM.. At the moment it also stopped starting the Clockworkmod.. It shows a phone with a red exclamation mark when i press RECOVERY from Bootloader screen...
I hope someone can help me fix this DHD..!
Regards, Thijs
Actually, at the moment i dont care if the ROM i mentioned gets installed.
I'd be SO HAPPY to have the stock Android 2.3.3 with Sense 2.x back!!!!!
Oke it now for some reason found the SDcard and i succesfully wiped the device again with Full wipe 1.5 EXT4 and succesfully installed the Sensation rom.
At this moment the systems just won't boot.
It freezes at the first screen u see when you boot the DHD..
Anyone knows what this could mean??
I'm sure you have done this but I'm going to ask anyway.
Do you have a nandroid backup somewhere in your computer? If you do try mounting the SDcard with a cardreader...some laptops have a built reader. copy the nandroid folder to where clockwork backs everything up and try restoring from phone recovery.
Since you are hung on boot...see if you can do a factory reset and data wipe...a wipe sometimes clears a rom not booting. then again...I'm speaking with experience from other phones not the Desire HD or any HTC for that matter.
Can some one suggest me where download and how installa the stock rom for wildfire.
Now I use a cynogen 7 and i want go back to original froyo + sense
There are 3 primary ways to do that:
1) If you had taken a Nandroid Backup before installing CM7, Just restore that. (But I am assuming you didn't, hence you are asking this)
2) If you want to retain root and Clockworkmod Recovery, just flash this ROM. Its Stock Froyo + Sense:
http://forum.xda-developers.com/showthread.php?t=877977
The process to install that is as follows:
- Download this attachment and place on your SDCard:
http://forum.xda-developers.com/attachment.php?attachmentid=662193&d=1311319218
- Flash in Clockworkmod 3.x or higher. This will give you temporary Clockworkmod 2.5 (Green Text)
- Then, perform a Data Wipe, and install the ROM Zip file as normal.
3) If you dont want to retain root and Clockworkmod
- Download the Froyo RUU from Shipped ROMs (Froyo WWE 2.22.405.1 EXE) from Shipped ROMs:
http://shipped-roms.com/index.php?category=android&model=Buzz
- Connect Wildfire to the PC, and simply run it.
Hi, I'm back
Just 2 questions
I downloaded both files
i copied both files on sd then i started rom manager and tapped on first field to
Flask clockwork mod recovery
Then? what i have to do to revert to Clockworkmod 2.5?
i downloaded this file from the link Safe_Buzz_Froyo_HTC_WWE_2.22.405.1_Rooted
is it true?
3xeno said:
2) If you want to retain root and Clockworkmod Recovery, just flash this ROM. Its Stock Froyo + Sense:
http://forum.xda-developers.com/showthread.php?t=877977
The process to install that is as follows:
- Download this attachment and place on your SDCard:
http://forum.xda-developers.com/attachment.php?attachmentid=662193&d=1311319218
- Flash in Clockworkmod 3.x or higher. This will give you temporary Clockworkmod 2.5 (Green Text)
- Then, perform a Data Wipe, and install the ROM Zip file as normal.
Click to expand...
Click to collapse
I cant find the website ther's a mirror if i want go back to stock with no root rom
3xeno said:
3) If you dont want to retain root and Clockworkmod
- Download the Froyo RUU from Shipped ROMs (Froyo WWE 2.22.405.1 EXE) from Shipped ROMs:
http://shipped-roms.com/index.php?category=android&model=Buzz
- Connect Wildfire to the PC, and simply run it.
Click to expand...
Click to collapse
Ariakan said:
Hi, I'm back
Just 2 questions
I downloaded both files
i copied both files on sd then i started rom manager and tapped on first field to
Flask clockwork mod recovery
Then? what i have to do to revert to Clockworkmod 2.5?
i downloaded this file from the link Safe_Buzz_Froyo_HTC_WWE_2.22.405.1_Rooted
is it true?
I cant find the website ther's a mirror if i want go back to stock with no root rom
Click to expand...
Click to collapse
I can't understand what you mean by your first question at all. Clockworkmod Recovery flashed via ROM Manager is temporary. Your original Clockworkmod will remain untouched. So if you are using the option called Flash Clockworkmod Recovery in ROM Manager, then the next step is to select Reboot into Recovery from the ROM Manager App again, then flash the ROM File. In this case, you can discard the update1.zip file, as it has no significance.
As for your second question, mirrors of the EXE RUU can be found here:
http://forum.xda-developers.com/showthread.php?t=1275680
My first question is simple
on my phone i have rom manager and there is a row named "Flask clockwork mod recovery"
but
i don't know how go back from cynogen to stock rom using clockwork mod recovery
can you help me step by step?
and the stock [with no root] rom for wildfire with froyo is this one?
RUU_Buzz_Froyo_HTC_WWE_2.22.405.1_Radio_13.55.55.2 4H_3.35.20.10_release_160191_signed.exe (This RUU contains HBoot 1.01.0001)
i need only to connect the phone to pc and run the exe?
First, decide what you want to do - Flash the EXE RUU, or Flash the Safe Flash ZIP File. If you decide to flash the Safe ZIP file, you will keep Clockworkmod Recovery, which will allow you to flash stuff later. If you select the EXE RUU, Clockworkmod Recovery will be removed, so you will NOT be able to flash anything, like ROMs, Kernels etc.
Once you have decided, here are the steps:
1) If you decide to install the Safe Flash ZIP File
- Download the Safe Flash ZIP from here:
http://forum.xda-developers.com/showthread.php?t=877977
Rooted / Unrooted, Its upto you which version you want. Rooted version has Superuser, so you can run apps like Titanium Backup etc. Unrooted doesnt have Superuser, so you cant run root apps.
- Place this file on your SDCard
- Now, open ROM Manager
- Select Flash Clockworkmod Recovery. Then make sure you select 2.5.0.7. NOT a version beginning with 3.x, 4.x or 5.x
- Once it is installed, in ROM Manager, the next option will be 'reboot into recovery'. Select that
- Once you select that, then you will be taken to Clockworkmod 2.5.0.7 (Which has all its options in Green coloured Text). Here, select "Wipe Data / Factory Reset". This step will erase all data on your phone (Not on your SDcard, Just your phone data. This step is essential when changing ROMs)
- Lastly, select "Install Zip from SDCard", and then, select the ZIP file you placed on your card at the beginning of this step. Let it install. Once installed, Select "Reboot System Now", and let the phone reboot. Done
2) If you decide to run the EXE RUU
- Its pretty much 1 step. Connect the phone to your PC and run the EXE File. It will automatically perform the install. If you get an Error 131 - Customer ID Error, you will need to create a Goldcard. There's a guide for that here:
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
I tried with mode 1
after choose install from sd and select yes it took hours but notting happen
then i rebooted my phone and it's stukked on clockworkrecovery but the version is the 3 not 2.5.0.7
i cant install stock rom from version 3
how i can go back to cwr 2.5.0.7
Did u perform wipe data n clear cache before flashing?
Sent from my HTC Wildfire using XDA Premium App
same question
I tried with mode 1
after choose install from sd and select yes it took hours but notting happen
then i rebooted my phone and it's stukked on clockworkrecovery but the version is the 3 not 2.5.0.7
i cant install stock rom from version 3
how i can go back to cwr 2.5.0.7
shemulweb said:
same question
I tried with mode 1
after choose install from sd and select yes it took hours but notting happen
then i rebooted my phone and it's stukked on clockworkrecovery but the version is the 3 not 2.5.0.7
i cant install stock rom from version 3
how i can go back to cwr 2.5.0.7
Click to expand...
Click to collapse
Flash this zip file in CWM3: (Install Zip from SDCard > Choose Zip from SDCard. (Don't select the "Apply update.zip option)
http://forum.xda-developers.com/attachment.php?attachmentid=662193&d=1311319218
It will give you temporary 2.5.0.7, then you can flash the ROM. (It is temporary, so, everytime you want CWM 2.5.0.7, you will have to flash this Zip file)