when ever i o/c my phone to above 1200 Mhz it seems to freeze when on demand or any other profiles
and the same for if i flash a rom with Virtuous OC Daemon
but it i set it to stay at a frequency say min 1500Mhz - max 1500 Mhz it works fine
it started doing this after i flashed an updated miui rom
and it dose it using any o/c app
This was a voltage step (UV) problem, and not all dhds have a problem with it.
Most flashable oc setting have a script to remove the offensive voltage. But as far as i know this has been sorted.
I would try another kernel that suits your phone better.
Sent from The Land that Time Forgot.
Related
Hey guys im having trouble with my phone when setcpu is running. When ever i come out of lock screen it takes a few seconds to be able to do stuff on my phone, like its waking up from sleep. Also some times i get this message and it has to reboot.
"Sorry activity htc sense (in application HTC Sense) is not responding."
Im running the 2.6.32.15 king # 4 kernel.
My set CPU settings are on 1.15 GHz max and 460800 MHz min. Im running conservative at the moment but it does it on other scaling like performance and on demand. my setting for screen off is 460min 614 max.
Is there anything im doing wrong? or should i be using a different kernel? What kernels are the best? Thanks
I would bump up the lower end to about 600. I have have issues lower than that coming out of sleep.
im running virtuous 2.7
power saving kernel
Main Profile is 245-998 ondemand
Screen Off is 245-384 ondemand
I do not have that problem... but it would be a lie if I told you i didn't before!
I was having this problem you are talking about when my main profile was set to conservative.
EDIT: Back up your setcpu + settings in titanium... Uninstall it (or freeze it) and see if the kernel can run it just fine cause it probably will. Most kernels already have the settings for optimum performance and even the devs who make them (like hydra) say that it will work best without setcpu.
Source: http://www.hydrakernel.net/hydra_kernels_information.htm
"I recommend not using the setcpu controls or governor with these kernels. Let the stock governor do the work. If you have setcpu installed I recommend clearing out the settings before flashing the kernels. You can use it to monitor cpu speeds or an app from the market called systempanel if so desired."
Hello there,
I've been flashing kernels since I was in LeeDroid Froyo and got no problems. However since I switched to GB based roms such as RCMix3D and TB Fusion, my phone always freezes when I try setting Kernel-Lee-V3.1.1-2.6.35.13-CALLREC or MDJs v19 to maximum overclock so I have no choice to but to stay on stock kernel. I have no ext3/ext4 partition on my SD card in case you ask.
Current ROM: TB Fusion 1.1.2
Radio: 12.54.60.25U_26.09.04.11_M2
Any idea what should I do to solve this issue?
golokipok said:
Hello there,
I've been flashing kernels since I was in LeeDroid Froyo and got no problems. However since I switched to GB based roms such as RCMix3D and TB Fusion, my phone always freezes when I try setting Kernel-Lee-V3.1.1-2.6.35.13-CALLREC or MDJs v19 to maximum overclock
Click to expand...
Click to collapse
uoooo this is sooo dangerous for your handset... u can "smoke" it...
Any idea what should I do to solve this issue?
Click to expand...
Click to collapse
yes, your handset freezes because the overclock that u do its too high... underclock it at 1200-1400mhz & try...
and configure SET CPU features... like the standby status, etc....but do it with common sense....
think about that DHD proccessor goes by default at 1gz, really when we overclock the processor we are putting in danger the security of our device
SERGI.3210 said:
uoooo this is sooo dangerous for your handset... u can "smoke" it...
yes, your handset freezes because the overclock that u do its too high... underclock it at 1200-1400mhz & try...
and configure SET CPU features... like the standby status, etc....but do it with common sense....
think about that DHD proccessor goes by default at 1gz, really when we overclock the processor we are putting in danger the security of our device
Click to expand...
Click to collapse
Haha! I know that overclocking is quite dangerous. Back on the froyo days, my phone is quite stable around 1.8ghz so I'm just wondering why is this happening (maybe my phone's processor is starting to fry up? ). Is there any effect if I'm using smartass profile on those kernels I've mentioned?
golokipok said:
Haha! I know that overclocking is quite dangerous. Back on the froyo days, my phone is quite stable around 1.8ghz so I'm just wondering why is this happening (maybe my phone's processor is starting to fry up? ).
i hope that the processor works or not works (don´t crashes a little bit...)
but the reason of your freezes maybe (almost sure) because froyo & gingerbread don´t works at the same form, and gingerbread need more resources & stability for to work correct... don´t forget that the kernel manages the hardware...
if u force it......... u know what can happen...
golokipok said:
there any effect if I'm using smartass profile on those kernels I've mentioned?
Click to expand...
Click to collapse
it´s possible, take this explanation, read and judge by yourself what´s the better cpu governor...
smartass (Best explanation i've found paraphrases to: based on interactive, but better.)
----
ondemand
Available in most kernels, and the default governor in most kernels. When the CPU load reaches a certain point (see "up threshold" in Advanced Settings), ondemand will rapidly scale the CPU up to meet demand, then gradually scale the CPU down when it isn't needed. - SetCPU website
conservative
Available in some kernels. It is similar to the ondemand governor, but will scale the CPU up more gradually to better fit demand. Conservative provides a less responsive experience than ondemand, but can save battery. - SetCPU website
performance
Available in most kernels. It will keep the CPU running at the "max" set value at all times. This is a bit more efficient than simply setting "max" and "min" to the same value and using ondemand because the system will not waste resources scanning for the CPU load. This governor is recommended for stable benchmarking. - SetCPU website
powersave
Available in some kernels. It will keep the CPU running at the "min" set value at all times. - SetCPU website
userspace
A method for controlling the CPU speed that isn't currently used by SetCPU. For best results, do not use the userspace governor. - SetCPU website
Interactive
The 'interactive' governor has a different approach. Instead of sampling the cpu
at a specified rate, the governor will scale the cpu frequency up when coming
out of idle. When the cpu comes out of idle, a timer is configured to fire
within 1-2 ticks. If the cpu is 100% busy from exiting idle to when the timer
fires then we assume the cpu is underpowered and ramp to MAX speed.
If the cpu was not 100% busy, then the governor evaluates the cpu load over the
last 'min_sample_rate' (default 50000 uS) to determine the cpu speed to ramp down
Click to expand...
Click to collapse
Thanks for the info
SERGI.3210 said:
because froyo & gingerbread don´t works at the same form, and gingerbread need more resources & stability for to work correct... don´t forget that the kernel manages the hardware...
if u force it......... u know what can happen...
Click to expand...
Click to collapse
You have mentioned about those "resources", is there any special measure that I need to do or what? I'm using the smartass profile on those kernels but still *sigh*
Anyway, I've observed on your sig that yours is overclocked @ 1.8ghz even though you're running GB, me envy
golokipok said:
have mentioned about those "resources", is there any special measure that I need to do or what? I'm using the smartass profile on those kernels but still *sigh*
Click to expand...
Click to collapse
you only should do a good over/underclock & set the correct cpu governor for your daily use....
well, you know ho is @MDeeJaay? the developer of MDJ kernels and roms...
he explained smartass with this words:
SMARTASS GOVERNOR - is based on the concept of the interactive governor.
I have always agreed that in theory the way interactive works - by taking over the idle loop - is very attractive. I have never managed to tweak it so it would behave decently in real life. Smartass is a complete rewrite of the code plus more. I think its a success. Performance is on par with the "old" minmax and I think smartass is a bit more responsive. Battery life is hard to quantify precisely but it does spend much more time at the lower frequencies.
Smartass will also cap the max frequency when sleeping to 245Mhz (or if your min frequency is higher than 245 - why?! - it will cap it to your min frequency). Lets take for example the 998/245 kernel, it will sleep at 245.
golokipok said:
, I've observed on your sig that yours is overclocked @ 1.8ghz even though you're running GB, me envy
Click to expand...
Click to collapse
no, no buddy... i only show the max speed nothing more... i set my cpu concretly like this;
CPU GOVERNOR:interactive
MAX SPEED:1113 MHZ
MIN SPEED:245 MHZ
PROFILE: screen off; 245 MHZ max.
245 MHZ min.
in adition i´m going to modify my syg LOL
haha..thanks again. I'm gonna try playing with the frequencies to see which will suit me
i hope someone can make a stable 1.8ghz kernel without the freeze
IT´S POSSIBLE but i don´t want to try it LOL
i love a lot my DHD
ok idk ow to overclock correctly i need a way to make this sense 3.5 rom less laggy an run more smoothly, can anybody help me with this???
Yes just use Daemon Controller (basically functions the same as SetCPU) and set your maximum frequency. For most ROMs I would set it around 1.5Ghz, and set the governor to smartass or smartassv2. The governors will depend on the kernel you're using. For a good sense kernel, I would use this one.
Additionally, you can download Incredicontrol via the market and that will enable you to adjust your voltages, based on the frequency steps. A lot of people prefer to bump the voltage up or down 25% to increase performance or reduce battery drain.
I AM NOT RESPONSIBLE FOR ANY PAIN AND SUFFERING YOUR DEVICE MAY INCUR.
If I helped, slap my Thanks button around a bit.
chattguy said:
Yes just use Daemon Controller (basically functions the same as SetCPU) and set your maximum frequency. For most ROMs I would set it around 1.5Ghz, and set the governor to smartass or smartassv2. The governors will depend on the kernel you're using. For a good sense kernel, I would use this one.
Additionally, you can download Incredicontrol via the market and that will enable you to adjust your voltages, based on the frequency steps. A lot of people prefer to bump the voltage up or down 25% to increase performance or reduce battery drain.
I AM NOT RESPONSIBLE FOR ANY PAIN AND SUFFERING YOUR DEVICE MAY INCUR.
If I helped, slap my Thanks button around a bit.
Click to expand...
Click to collapse
0k the number says 245760 i cant tell which is the 1.5 ghz?
245mhz... That is your lowest frequency. You'll set that as your minimum. Your max should be set at 1497mhz. It'll have some numbers straggling on the end but disregard them. 1497mhz = 1.5Ghz.
Sent from my Incredible 2 using Tapatalk
I have htc wildfire s ...i hav rooted ...i want to overclock it 806 mhz.....pls tell me the procedure to overclock..
I am using htc wildfire rom ..pls help
First you need a kernel that supports overclocking.
If you using a stock Rom then look for the kernel that matches your Android version eg. 2.3.3 or 2.3.5 you will find them in the development section posted by Jikantaru
If you install a custom Rom then it will most likely have an overclockable kernel baked in.
To change clock settings I recommend 'no frills CPU' search it in the market or you could use set CPU.
Once you install one of the above apps then change the min and max sliders to the desired frequency.
if we over clock it much does it effect the speed or hardware of the phone?
Your phone may hang.
There is SetCPU for XDA members:
http://forum.xda-developers.com/showthread.php?t=505419
RRRb50 said:
if we over clock it much does it effect the speed or hardware of the phone?
Click to expand...
Click to collapse
You will definitely get better performance and it shouldn't cause you any problems.
Use no frills CPU I find its better than set CPU, when restarting your phone set CPU doesn't keep your overclock settings even though its set on boot.
As for the govonor settings I would choose smartass2 and noop for the scheduler.
I would keep the minimum frequency on 245MHz it can go lower but it could cause some issues (lag and slow unlocking and waking)
Note: not all cpu's are capable of running at the same speed, I'm lucky mine can run at 806MHz but some people have issues.
If you notice any problems like freezing etc, then drop the speed to a lower frequency until you find the sweet spot for your CPU.
I had mine at 806 MHz with no problems
Sent from my NookColor using xda premium
so it wont cause hardware problems only lagging and other stuff
RRRb50 said:
so it wont cause hardware problems only lagging and other stuff
Click to expand...
Click to collapse
Should be fine mate.
But remember if in the very unlikely event something does go wrong I wont be held responsible.
youll have to need an overclock kernel for that. (and a rom which supports one)
go for dust kernel or cake kernel! These two are well known for high end kernels!
Hi,
I just flashed ViperX 2.7 and faux 10u and I noticed that in the cpu section of venom tweaks min cpu frequency is set to be 1500 and max is set to be 1600. Is this correct? I have a variant one chip so the overclock should only be 1500 right? When the phone first boots min frequency would say 51 (which i assume is correct) but after some use it becomes 1500. This doesn't look right.
Fonggg said:
Hi,
I just flashed ViperX 2.7 and faux 10u and I noticed that in the cpu section of venom tweaks min cpu frequency is set to be 1500 and max is set to be 1600. Is this correct? I have a variant one chip so the overclock should only be 1500 right? When the phone first boots min frequency would say 51 (which i assume is correct) but after some use it becomes 1500. This doesn't look right.
Click to expand...
Click to collapse
i have the same problem too, i notice when u put it on vibrate, it will reboot for sure!, i also search that u dont use aosp lockscreen, that will solve the problem.i'm not sure yet, cuz i've change to jellybam rom already