Develop Bugs

New website for Touch accessories / parts

Hi all,
Well, I have finally finished my website for PDA parts / accessories.
http://www.phoneystore.com
I am adding new products every day (I have more than 2000 products and so far I've only added 600), so please check back regularly for the latest additions.
If you can't find a part you need, PM me or send an enquiry from the site, and I will get back to you as soon as possible.
I would also appreciate your comments / feedback about the site, so that I can make it easier to use.
njbridges

looking for a pouch with a clip that swivels like the one on this link, post number 14.
http://forum.xda-developers.com/showthread.php?t=320618&page=2
let me know if you know where i can get it or if u can get it.

Need to know if you have the keypad in different colors to fit the different housings (green/white/silver/red) for HTC Touch, not listed in your site, only black.

falgun said:
looking for a pouch with a clip that swivels like the one on this link, post number 14.
http://forum.xda-developers.com/showthread.php?t=320618&page=2
let me know if you know where i can get it or if u can get it.
Click to expand...
Click to collapse
You could have a look at the Krusell Orbit...althought it is a bit thick, the variouse belt & armclips (swivels) are awesome

grypho said:
Need to know if you have the keypad in different colors to fit the different housings (green/white/silver/red) for HTC Touch, not listed in your site, only black.
Click to expand...
Click to collapse
Only have the black keypad for now. I hope to have the other colors in next week. I will post some pictures / links here as soon as they come in.

falgun said:
looking for a pouch with a clip that swivels like the one on this link, post number 14.
http://forum.xda-developers.com/showthread.php?t=320618&page=2
let me know if you know where i can get it or if u can get it.
Click to expand...
Click to collapse
Did you want a case that looks the same as the one in the picture (side case), or were you just interested in the 360-degrees swivel?
I have a flip case (opens fron the bottom of the phone towards the top) that has a plastic belt clip. The belt clip can turn a full 360-degrees.

sorry i did not specify my fault.
Yeah i was looking for a case that is side loading where i open the case i can pull it out right away, just like a regular pouch but with magnetic latch, as well as a swivel 360, or 180 clip to hang over my side. so yeah i guess just like in the picture design and all could be different but same function as the one in the picture.

That's a nice website - it works well and I like the way it remembers 'my' phone and can display accessories specifically for it as I navigate the site.
How much would shipping to the UK cost for a desktop cradle? I can't find any shipping cost guidelines on the site. It would be helpful if you could give guideline prices in the FAQ.

SiliconS said:
That's a nice website - it works well and I like the way it remembers 'my' phone and can display accessories specifically for it as I navigate the site.
How much would shipping to the UK cost for a desktop cradle? I can't find any shipping cost guidelines on the site. It would be helpful if you could give guideline prices in the FAQ.
Click to expand...
Click to collapse
If it's just the cradle, $9.85 US (about 4.67 GBP)

Thank you
My brother bought me the cradle for my Touch from your website as a gift for Christmas, and he said the service was excellent, so thank you very much. You delivered it to France very quickly.

njbridges said:
Hi all,
Well, I have finally finished my website for PDA parts / accessories.
http://www.phoneystore.com
I am adding new products every day (I have more than 2000 products and so far I've only added 600), so please check back regularly for the latest additions.
If you can't find a part you need, PM me or send an enquiry from the site, and I will get back to you as soon as possible.
I would also appreciate your comments / feedback about the site, so that I can make it easier to use.
njbridges
Click to expand...
Click to collapse
Hi. What´s up with your site? Last days i´ve tried to look for some accessories for my touch, but your shop isn´t available...

Site is still down dude...
Any chance of scoring the HTC Green OEM Housing?

Hey dude..do u have any external GPS receivers(bluetooth) for sale ..(asking as ur site is down currently)

namz said:
Hey dude..do u have any external GPS receivers(bluetooth) for sale ..(asking as ur site is down currently)
Click to expand...
Click to collapse
Try this site here

LCD for MDA vario III
Tried your site, but seems its down. Wanted to know if there is any other site which will ship me this LCD in INDIA.

i9000 back cover?

http://cgi.ebay.com/New-Genuine-Sam...Fascias_JN&hash=item5194bdfde4#ht_1508wt_1137
Will this fit on the Vibrant?
I really dig the "with Google". Lol

andershizzle said:
http://cgi.ebay.com/New-Genuine-Sam...Fascias_JN&hash=item5194bdfde4#ht_1508wt_1137
Will this fit on the Vibrant?
I really dig the "with Google". Lol
Click to expand...
Click to collapse
if it does that would be great looks to be .3MM wider sooooo don't know if it will or not.
"Vibrant Dimensions 122.4 x 64.5 x 9.9 mm"
"Galaxy S i9000 dimensions Dimensions 122.4 x 64.2 x 9.9 mm"

Alright then. I'll order it and let everyone know lmao!

andershizzle said:
Alright then. I'll order it and let everyone know lmao!
Click to expand...
Click to collapse
cool hopefully you get it in the mail soon.

Yea, please update, I'm looking forward to hearing about this.
Sent from my SGH-T959 using XDA App

Ouch on the price. A very good full case can be had for less.
Interested to know how it fits though in case a replacement becomes necessary at some point.
Thanks.

I prefer going Naked with my Vibrant All it needs is the with google

The Google is a nice touch why not just get a decal?
Sent from my SGH-T959 using XDA App

pretty sure that .3mm measurement difference is just an error. there is zero reason why samsung would make one phone wider or slimmer... the vibrant even shares the chassis with the i9000... the forward facing camera hole is even present.

turbosix said:
pretty sure that .3mm measurement difference is just an error. there is zero reason why samsung would make one phone wider or slimmer... the vibrant even shares the chassis with the i9000... the forward facing camera hole is even present.
Click to expand...
Click to collapse
Duno but Captive cases wont work so just figured that was the same with the i9000, would be better for us if it were this way when the white cases come out.

talltexan said:
Duno but Captive cases wont work so just figured that was the same with the i9000, would be better for us if it were this way when the white cases come out.
Click to expand...
Click to collapse
The captivate is the most unique Galaxy S phone in terms of appearances, the Vibrant is one of the phones that is pretty much alike to the I9000 aside from the 4 keys and a front camera.
The captivate's method of taking it off is different as well.

Well I got my PayPal unlocked and sent the payment just now. Hope it gets here soon! Shipping from UK to US... Can't wait

andershizzle said:
Well I got my PayPal unlocked and sent the payment just now. Hope it gets here soon! Shipping from UK to US... Can't wait
Click to expand...
Click to collapse
been doing some illegal stuff with your paypal? Nigerian scams ?

Nah I never confirmed my SSN or whatever and when I requested a Debit Card they flipped out like ZOMG scan your ID. confirm SSN. Utility Bill... blahblah..

Did you get yours yet.
Sent from my SGH-T959 using XDA App

It's taking forever to get here. He didn't give me a tracking number either. From UK to PA... Shouldn't be much longer?

keep us posted
edit:
just found this... this might provide a clue.
http://cgi.ebay.com/3000mAh-Extende...789421?pt=PDA_Accessories&hash=item5adbfc1ced
says its not compatible with vibrant, i would assume if i9000 and vibrant shared exact same battery cover, then this would fit, meaning the one you purchased would fit too. since this doesn't, maybe the listing you showed won't either?
ps... why does it say unlocked i9000 only, what does being locked or unlocked have anything to do with a physical battery cover?

I really don't know. We'll see when it gets here.

Anderdroid said:
I really don't know. We'll see when it gets here.
Click to expand...
Click to collapse
still not there?

It still hasn't arrived... Starting an eBay case if it doesn't come by Wednesday ;/

Anymode Case

Anyone seen this?
http://www.anymode.net/goods/view.php?goodsno=12346934
I would be all over it if it didn't put the tablet upside-down when in the typing angle.

Id take one right now. I wonder where to order to get it shipped to the US
Sent from my GT-P7510 using XDA Premium App

I want one too. Anyone translate for a group buy, maybe?

I third that. I'd love one of these babies too. I have a friend at work that reads Korean, but I dunno how that would helps get our hands on one of them.
Btw, these cost 39,000 won which translates to 35 usd.

Wow. Seems like they couldn't handle the press exposure. They've taken down the site, photos, prices, etc.
Btw, the design itself was originally made by Incase or some other company for the first ipad, wasn't it? Though I guess Apple brought the patent before launching smart cover for ipad2.

You can get one of these in red on ebay UK at the moment. It seems to be a copy of the anymode one....

T120ted said:
I want one too. Anyone translate for a group buy, maybe?
Click to expand...
Click to collapse
Google Translate should help you
Sorry, I can't post links, so you need to do it by yourself.

Rogdin said:
Google Translate should help you
Sorry, I can't post links, so you need to do it by yourself.
Click to expand...
Click to collapse
Yeah, I admit it. I was just too lazy at the time. It might of been that I was in a 150sq ft room filled with electronics and my 5 & 8 year olds running loose as I tried to get my money back from sprint. Yet, come to think of it, sprint deserved every minute of their greasy hands on every one of their phones and glass cases. I should of just walked in and said have at it boys.

You can't order unless you are registered and to register you need a Korean social security number. This most likely means that it won't deliver outside Korea.
I lived in Korea for 10 years.

Go figure. Another case i want that's not available. Had a relative with one for the (insert patent # here)pad and thought it was a nice little case that kept the bulk down.

Anyone know where I can find something like this for the tab? I'm really interested, and since its been taken down, I'd like to know if there are any alternatives.

I found one on ebay. concerned about trying though
Smart cover

eeeeek $25 for this !
i'd take an Anymode anyday instead (!)

jeandujardin01 said:
eeeeek $25 for this !
i'd take an Anymode anyday instead (!)
Click to expand...
Click to collapse
Yeah, I didn't want to say anything, but it just looked like two pieces of cheap leather slapped together and loose fitting at that. It could be good for someone.

Damn.... It's incredibly difficult to find a case I like. I like this one. Especially in baby blue.
I sent them an email just in case they'll ship them out on the sly. Hopefully somebody there reads/writes English.

Samsung should just give crapple the finger and approve this. Apple has already said they are not using Samsung for their next chip, at least I think I read that on Engadget.
I would have loved this case.

jvs60 said:
Id take one right now. I wonder where to order to get it shipped to the US
Sent from my GT-P7510 using XDA Premium App
Click to expand...
Click to collapse
T120ted said:
I want one too. Anyone translate for a group buy, maybe?
Click to expand...
Click to collapse
tigris67 said:
Anyone know where I can find something like this for the tab? I'm really interested, and since its been taken down, I'd like to know if there are any alternatives.
Click to expand...
Click to collapse
gmarket (see only with worldwide shipping)

Looking for one of these as well. There are some knockoffs on eBay, but no AnyMode ones

Smart Cover
simonk83 said:
Looking for one of these as well. There are some knockoffs on eBay, but no AnyMode ones
Click to expand...
Click to collapse
Here you go!!!!
http://www.casesinthebox.com/blue-1...samsung-galaxy-tab-p7510-tablet-pc_p3946.html

dmoney94 said:
Here you go!!!!
http://www.casesinthebox.com/blue-1...samsung-galaxy-tab-p7510-tablet-pc_p3946.html
Click to expand...
Click to collapse
Is this genuine anymode case?

Seidio Surface case/holster?

I had a Seidio Surface case/holster combo for my previous phone and it was my favorite case. I wanted to get one for the Galaxy S2, but Seidio doesn't make one for the T-Mobile version. It's available for all other flavors of the Galaxy S2... just the T-Mobile version has been left out.
I wrote to them asking if they had plans to produce one in the future, but I can't get a straightforward answer from them. They just point me to their existing products for this phone. I was hoping that if there were enough people showing interest in this phone case, they'd consider adding it to their lineup. If you've got a couple of minutes and you'd like to see it happen, please consider contacting them about it.
[email protected]
[email protected]

kinfauns said:
I had a Seidio Surface case/holster combo for my previous phone and it was my favorite case. I wanted to get one for the Galaxy S2, but Seidio doesn't make one for the T-Mobile version. It's available for all other flavors of the Galaxy S2... just the T-Mobile version has been left out.
I wrote to them asking if they had plans to produce one in the future, but I can't get a straightforward answer from them. They just point me to their existing products for this phone. I was hoping that if there were enough people showing interest in this phone case, they'd consider adding it to their lineup. If you've got a couple of minutes and you'd like to see it happen, please consider contacting them about it.
[email protected]
[email protected]
Click to expand...
Click to collapse
Is this not what you are referring to?
http://www.seidioonline.com/t-mobile-galaxy-s-II-active-case-holster-black-p/bd2-hk3ssg2tk-bk.htm
edit: sorry i see this is the "active" but isn't this pretty similar or no?

jdubb1106 said:
edit: sorry i see this is the "active" but isn't this pretty similar or no?
Click to expand...
Click to collapse
The Active is a more rugged and bulkier case than the Surface. I've never had an Active case, but I wanted something like the Surface case that I could slip into my pocket or use the holster as needed.
I can't post outside links yet, but if you look at the Samsung Epic 4G Touch category on their site, that phone has both cases available for it. It should give you a good idea of what the Surface case should look like for the T-Mobile version of the phone.

jdubb1106 said:
Is this not what you are referring to?
http://www.seidioonline.com/t-mobile-galaxy-s-II-active-case-holster-black-p/bd2-hk3ssg2tk-bk.htm
edit: sorry i see this is the "active" but isn't this pretty similar or no?
Click to expand...
Click to collapse
Case makes the phone look like a hand grenade. perfect for the amaze
Sent from my SGH-T989 using XDA App

jordanishere said:
Case makes the phone look like a hand grenade. perfect for the amaze
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
Yea very true, but I'd rather have a hand grenade than a shattered GS2 (know its not probable but its possible)

jdubb1106 said:
Yea very true, but I'd rather have a hand grenade than a shattered GS2 (know its not probable but its possible)
Click to expand...
Click to collapse
So by a case that isnt straight outta iraq/afghanistan.
Sent from my SGH-T989 using XDA App

Elegant charging stand

Found this on thingyverse. Prints in about 6hours on a Makerbot. Really nice. The person who designed this also figured out the correct center of mass and it's very stable and hard to knock over. Sorry if I missed that somebody already posted this (I could not find it here).

That is really cool, thanks! Getting quotes from the local 3D printers. Can I ask how much you paid for yours to be made?

shag_on_e said:
That is really cool, thanks! Getting quotes from the local 3D printers. Can I ask how much you paid for yours to be made?
Click to expand...
Click to collapse
I didn't pay for mine. Just used a printer at work with some extra feed-stock material sitting around. The tricky part was to get all the support material off. I can't imagine this will be cheap. Similar items go for $25 at Amazon. It's much easier to print this one: http: / / www.thingiverse.com/thing:1383100

derausgewanderte said:
I didn't pay for mine. Just used a printer at work with some extra feed-stock material sitting around. The tricky part was to get all the support material off. I can't imagine this will be cheap. Similar items go for $25 at Amazon. It's much easier to print this one: http: / / www.thingiverse.com/thing:1383100
Click to expand...
Click to collapse
I do not have access to a 3d printer and I would like to know if you know where I can buy one of these stands. This looks cool and functional!
Sent from my SM-G935T using XDA-Developers mobile app

OuncE718 said:
I do not have access to a 3d printer and I would like to know if you know where I can buy one of these stands. This looks cool and functional!
Sent from my SM-G935T using XDA-Developers mobile app
Click to expand...
Click to collapse
sorry, I did not come across any seller on ebay or amazon who'd sell this.

I'd like this also. Can I send someone money that can print one?

CCJ22 said:
I'd like this also. Can I send someone money that can print one?
Click to expand...
Click to collapse
There are local print shops emerging in a lot of places, maybe one in your area. Just take your design to the shop and have it printed or print it yourself.
That will eliminate shipping costs as well , which can be high depending on how far it has to go.

Is there a link to the printer files for the original stand pictured? Am I completely blind? I'd love to donate to that person and get that stand printed!!
Edit: https://www.thingiverse.com/thing:1306057 yeah.. I'll remember to look better next time >_<

never mind, wrong thread

Just got my printed stand in the mail from my friend today! Fits like a glove! Balances well, attaches to charge wonderfully. I am beyond stoked right now.

Funny, I just got my Huawei watch today and 3d printing a stand was my first thought as I plan to use a metal band and the stock charger wouldn't be very accommodating for that. Then I came here and saw this thread.
3D printing it in wood right now, will post pictures when it's done.

Well I rushed the post processing (staining and painting) because I'm heading out for the holidays and wanted to at least get something done. Still wet. I'll probably re-do it in the new year and make it completely smooth and more wood like.

Looking good!

Anyone know of any services in the UK that might be able to print this for me?