Related
I've bought one of the adaptors to allow normal headphones to be plugged into my XDA Orbit. What I'd like to do is plug a mini USB extension into the XDA then on the other end plug the adaptor in. Ideally it would be 2m long and obviously be male - female. The main reason is that my adaptor lets me charge my XDA up aswell and I don't want lots of cables in front of me. So i'll plug the extension in and run it into my glove compartment, were I'll plug in my fm transmitter and car charger.
Hope this makes sense, i've spent ages googling to try and find one but i've had no luck, any ideas?
I was also searching for one of these and failed. Post back here if you succeed.
Mini-USB extension cable
I found a single source at
http://www.pc-mobile.net/gugf.htm. It's item number CMUE about half way down the page.
I also found some folks who seem to be prepared to make almost anything at http://www.cypressindustries.com/contact/index.html
Best regards,
Steve
3 in 1 USB Adapter HTC TyTn P3300
There is such interesting device:
HTC 3-in-1 USB Adapter
Features:
11pins to 11pins HTC adapter, with USB port and 3.5mm Stereo Head Jack, you can connect to your own headphone or amplifier for audio and the USB port, you are able to charge the device via USB cable at the same time.
Support :
HTC P4350/HTC Herald/Dopod C800/Dopod C858
HTC Trinity/HTC P3600/Qtek P3600/Orange SPV M700/Dopod D810/Dopod CHT9100
O2 XDA Orbit/HTC P3300/HTC Artemis/Qtek G200/Dopod P800W/Dopod M700/T-Mobile MDA Compact III/Orange SPV M650
O2 Xda Cosmo/HTC Excalibur/HTC S620/T-Mobile Dash/Dopod C720W
HTC S310/HTC Oxygen/Orange SPV C100/Qtek 7200
O2 XDA Trion/MDA Vario II/Cingular 8525/i-mate JASJAM/Qtek 9600/HTC TyTN/Dopod CHT9000/Orange SPV M3100/Vodafone 1605/Dopod 838Pro
HTC MTeoR/HTC Breeze/Dopod 595/Qtek 8600
Of course I can not say if it's working flawlesly with all listed devices, but with my HTC P3300 (Artemis) it works great.
I received one extra adapter as a present, so if you are in the Netherlands and interested to have it, I can sell my second adapter for 10 EUR. Please PM me with the suggestions and offers.
Mini USB extension cable
I had the same problems finding a mini usb extension. Then e-bay came to the rescue! This guy
http://myworld.ebay.co.uk/techno_toys/
has just what you need, a 1m long mini usb extension cable for less than £10.00 !
Cheaper and faster than waiting for it to arrive from Hong-Kong
Bill Kelly
Thanks all, google a mini usb extender and this was the first thing that came up. Can't believe these cables are so rare!
FYI my supplier was Keven from Techno Toys on ebay UK http://search.ebay.co.uk/_W0QQsassZtechno_toys
those links you posted don't have USB mini female to USB mini male.
I only need it to be 3 inches.
also, would that 3 in 1 work for my wizard?
Thanks!
Ray_jai said:
those links you posted don't have USB mini female to USB mini male.
I only need it to be 3 inches. Also, would that 3 in 1 work for my wizard?
Click to expand...
Click to collapse
This is a link to the current listing (as of 11 Feb 08):
mini usb extansion cable on e-bay
3 were listed, but 2 have already gone. They are 1.2m long too, not the 30cm that you need, but maybe you can cut/re-solder it? They are pretty rare though, so not sure I would risk it!
plinkykev said:
This is a link to the current listing (as of 11 Feb 08):
mini usb extansion cable on e-bay
3 were listed, but 2 have already gone. They are 1.2m long too, not the 30cm that you need, but maybe you can cut/re-solder it? They are pretty rare though, so not sure I would risk it!
Click to expand...
Click to collapse
These wont carry the audio though. They are only 5 pin and carry data only. Ive got one of these cables and the 3 in 1 adaptor. The adaptor is extusb and has 11 pins, and this cable is regular usb with only 5 pins. Not only that, they dont actually fit together as a male extusb is a slightly different shape to the female regular miniusb. Obviously Female Extusb to male miniusb would work, but this cable is the wrong way round for that.
made my own
I was also looking for one to use in my car. Couldn't find any so I made one. Used a vga cable, cut the htc usb charger/2.5 headphone splitter that came with my touch, and soldered the cables together. I'll post pics tomorrow if i get a chance. Btw, i got lucky, because while trying to solder one of the last cables, the yellow cable that connects to the end of the 2.5 headphone jack came off. Luckily, it wasn't the cable that was for left or right channel.
I couldnt find an 11 core cable small enough to look good. VGA cable isnt too thick though... tempting.
pics of htc supplied usb to usb/2.5 extended
Nice, I wish i had soldering skills. everytime i try to solder, the solder never bonds.
I tried heating up the wirers, but the solder always bonds to the tip or combine with the solder coil again.
Schooleydoo said:
These wont carry the audio though. They are only 5 pin and carry data only. Ive got one of these cables and the 3 in 1 adaptor. The adaptor is extusb and has 11 pins, and this cable is regular usb with only 5 pins.
Click to expand...
Click to collapse
OK, sorry, I had used it OK with my Motorola phone, and that did the audio OK. Didn't realise there were more pins in the PDA cable.
11 pin extension cable
how many wires are needed for power and Stereo?
I am Guessing 1 for right, 1 for left, 1 for Power, and for ground. I am asking because I want to make my own, but I do not want a big diameter cable.
I have the 3 in 1 splitter, so it has everything I need except for length. Is a 4 wire cable all it really needs?
Anyone?...
Here is another source for Mini USB Extension
Man are these cables ever hard to find. I have been looking for such a cable for a long time since I recently found this other guy on ebay. He has 2m (6ft) and 3m (9ft) versions, all USB 2.0 compatible: kabelbaron on ebay I think he ships worldwide, too...
(I think you can also get to his recent items through http://www.kabelbaron.de).
Eggbert said:
I have been looking for such a cable for a long time since I recently found this other guy on ebay. He has...
Click to expand...
Click to collapse
They look like standard 5 pin extensions to me.
People in this thread are looking for extUSB extenders that have 11pins.
Ray_jai said:
Nice, I wish i had soldering skills. everytime i try to solder, the solder never bonds.
I tried heating up the wirers, but the solder always bonds to the tip or combine with the solder coil again.
Click to expand...
Click to collapse
What works for me is to melt a tiny bit of solder on the tip, then touch that melted solder to the wires. It will transfer heat to the wires and you can add more solder from another angle. Wipe the tip on a wet sponge after every use. This leaves a thin layer of clean solder on the tip. If you let the tip go uncleaned for too long it turns totally black and conducts heat poorly. If you buy tip cleaner you can sometimes get the black off.
Also, if you have tiny things to connect and little space to work, put a bit of solder on both things first, then touch them together and the heat will transfer into both of them, melting them together. Keeping them steady after you pull the tip away is key to a strong join. If they're trying to pull apart as the solder cools, the solder will look more dull than shiny and be easy to break.
Also, be absolutely sure you get 63/37 (63% tin, 37% lead) solder instead of lead-free because lead-free doesn't melt till a much higher temperature and that's more likely to damage your electronics. Also, I could barely melt the lead-free solder with three different irons I tried and it was very hard to make it bond to things.
See http://en.wikipedia.org/wiki/Solder for more.
[email protected] said:
how many wires are needed for power and Stereo?
I am Guessing 1 for right, 1 for left, 1 for Power, and for ground. I am asking because I want to make my own, but I do not want a big diameter cable.
I have the 3 in 1 splitter, so it has everything I need except for length. Is a 4 wire cable all it really needs?
Anyone?...
Click to expand...
Click to collapse
USB power uses a +5V and ground pin on the top row.
Audio uses 3 more pins along the bottom: left, right, and audio ground. There's also two mic pins along the bottom you might want to tap into.
See http://wiki.xda-developers.com/index.php?pagename=ExtUSB
I found a good source for mini usb extensions of all kinds. This site really was the best site for USB and Firewire cables. I got mine today.
Edited: This cables are 5pin, just for data and power not for audio.
http://www.usbfirewire.com/
The most Micro USB to USB converters are not work if you want to use it for OTG converter, because the 4. pin of the micro usb plug is not connected!
The most ebay and computer shop's converters like this!
If you want to use it for working OTG adapter you have to connect the micro usb connector 4. pin to GND (5. pin).
Like this:
I made this mod on my adapter and it works!
First you have to open up the outter cover and carve the plastic around the micro usb pins. You can use multimeter to check the pinout.
After that solder the 4. pin to 5. pin with a piece of wire.
And finally glue back the outter cover.
Video:
So if you have not working adapter you can mod it, if you have suffice experience with electronic and proper tools.
Only do with your own risk!
I have this Usb converter!
With your mod works perfectly!!
just tried it it works perf, thank you!
Weird I got one off eBay from Hong Kong and it works without Modding. Can open files off a USB stick. Got it for £1
Sent from my GT-I9100 using XDA Premium App
Anyone knows how the Galaxy determines to be in home or car dock?
ALexander
hi thanks for great find just built one from a female usb cable vey nice.
WOrked for me too...thanks
skibadee said:
Weird I got one off eBay from Hong Kong and it works without Modding. Can open files off a USB stick. Got it for £1
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Share the link please
I buy a pair in Dealextreme.com
SKU 50774 o search OTG
It may have a resistor between pin 4 and 5, kind of like a jig,
I remember there was a fun with resistors thread for the sgs1.
I may attack tge free dock I,got from optus.
Sent from my GT-I9100 using XDA App
Vairn said:
It may have a resistor between pin 4 and 5, kind of like a jig,
Click to expand...
Click to collapse
OTG has no resistor, its direct connect to GND.
i bought this one from ebay
(cant post links )
item number 260782021641
and it works with usb drives and i used a mouse in it too
OTG Cable USB (B) to Micro USB (A) Powered with AAA batteries ?
As one knows, Samsung has promised a MHL Cable
You noticed it is not only a cable but a box out of which you may plug in an extra power supply.
The obvious reason is if the passive monitor does not furnish 5V, the phone will rapidly be out of power.
Now you know that to obtain video rather than anything less, Pin 4 (sense) and 5 (Ground) of micro USB (male A) must be connected with a 365K resistance.
I suppose the dock Samsung is selling for I9100 (yes, I have it) is grounded at 1000K as it provides audio with remote, and yes, the dock provides power supply via extra micro USB as well.
I come to my point: If I want to access any USB data On the Go, I need a cable OTG with 2 ports: USB 2.0/3.0 (female, B sided) to a micro USB (male, A sided, grounded but with no resistance = 0K). Many of them exist on the market out there.
But it is quite impossible to use because of lack of power supply in the passive device (let’s say a handy 1T HDD usually powered via Host connexion !
Would it be possible to insert some sort of receptacle for AAA battery in the middle of such a cable to provide for power while you are for a long time out of access to an electric plug ? Does such a cable exist somewhere to buy ? What would be the sheme to mount this ? HELP !
Is it possible to add USB charging cable to USB-host cable? I want to use mouse\keyboard\flash and charge device in the same time.
I also interested how to add power to USB-host cable for devices "High-power device connected".
OTG and Power
thats excactly my question:
is it possible to use otg cable with a trackball or mouse and at same time charge the S2?
give power to usb mouse and charge S2 over a charger!?
Is it possible to use a game controller over usb otg? Would be pretty nice.
Wanna have a S2Play ;-)
anonymous572 said:
Is it possible to add USB charging cable to USB-host cable? I want to use mouse\keyboard\flash and charge device in the same time.
I also interested how to add power to USB-host cable for devices "High-power device connected".
Click to expand...
Click to collapse
it is not possible. usb host can be used one way not two ways.
Sent from my GT-I9100
i do have same problem..is there any suggestions to make sgs2 can read the high-power USB flashdisk via otg??
An USB hub with external power maybe ? I didn't tried this kind of setup, but it should work. I have a hub, but I don't have a OTG cable yet.
blueseeker said:
An USB hub with external power maybe ? I didn't tried this kind of setup, but it should work. I have a hub, but I don't have a OTG cable yet.
Click to expand...
Click to collapse
I've been try this, but still doesn't work for me..I'm also used electrical multi-tester, and the usb flash already has 5V voltage but in my sgs2 still nothing happen (my usb flashdisk doesn't mounted to sgs2)..
Is there any driver/apps do I need to install first before using OTG?? or, is there two kind of sgs2, the one which support OTG and the other one not??
please someone help me...One point I choose this SGS2 is the OTG feature..
PS: sorry for my english
I bought these on ebay. The HDMI is short but worked but when I connect both cables to lapdock, the USB is not being recognized so the keyboard/mouse is not working. I want this just to act as an extension so I can use full lapdock abilities with cables. Any idea what's going on (cable charges on plug but does not charge on lapdock)? Maybe someone has better usb cables.
fixed the link:
http://www.ebay.com/itm/29059482363...X:IT&_trksid=p3984.m1497.l2649#ht_3046wt_1508
http://www.ebay.com/itm/36042990934...X:IT&_trksid=p3984.m1497.l2649#ht_2333wt_1010
links appear to be broken...
From your title I've been looking for these (or similar) cables for a long time and have been unsuccessful. However I have yet to try them.
Fixed the link
http://www.ebay.com/itm/29059482363...X:IT&_trksid=p3984.m1497.l2649#ht_3046wt_1508
http://www.ebay.com/itm/36042990934...X:IT&_trksid=p3984.m1497.l2649#ht_2333wt_1010
i don't think it will work either way, tried a few things like this with no avail.
why wouldn't they? Cheap build quality that doesn't include the data wires? Hell I'll be willing to splice two cables together to get our desired effect, the only problem is that cords with a female micro usb are incredibly hard to come by
So that is what you think it is? No data on the usb cables.
Sent from my MB860 using XDA App
mamoranto said:
So that is what you think it is? No data on the usb cables.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
the only reason that is my suspicion is because there are many "charging" products out there that don't really need data. Why there would be a need for such a small charging extension cable is beyond me, but it's the only solution I can think of, but I have no way of confirming or denying it either. The ebay descriptions seem to imply that the data wires are there, but we all know how reliable ebay can be...
Another idea I had was that it might be sensing the resistance in the cable, since, if I remember correctly, that was how some think/though the car dock puts the atrix into car mode without a magnet as is/was commonly used. Again these are just ideas.
Or the cable is just so poorly made that it's defective...I honestly have no clue
Has anyone got full lapdock capabilities using extension cables? I can only get the screen working and not the mouse and keyboard.
The HDMI extender was the hard one to find. There are other micro USB extenders out there, theoretically with all wires connected....
http://www.usbfirewire.com/uextendmicrob.html
Kind of makes me wish i hadn't hacked up my lapdock to work with the Otterbox
Where did you get your HDMI extender? I got mine from All4Cellular but it's quite short. Will have to get another HDMI one if the usb cable you recommended works.
mamoranto said:
Where did you get your HDMI extender? I got mine from All4Cellular but it's quite short. Will have to get another HDMI one if the usb cable you recommended works.
Click to expand...
Click to collapse
If you're asking me, i didn't. I was referring to the ebay link in the third post.
grevedan said:
The HDMI extender was the hard one to find. There are other micro USB extenders out there, theoretically with all wires connected....
http://www.usbfirewire.com/uextendmicrob.html
Kind of makes me wish i hadn't hacked up my webtop to work with the Otterbox
Click to expand...
Click to collapse
before I read that post, I was looking around the forums and the web yesterday well into the night. here are some of the things I've found that might be relevant to everyone (and it might possibly be cheaper, though more diy).
Micro USB stuff:
I have no idea why this exists http://www.dealextreme.com/p/micro-...r-cable-for-blackberry-9900-black-30cm-107901
I have no idea why this only has 4 pins http://www.sparkfun.com/products/9614
http://www.sparkfun.com/products/10031
mamoranto said:
Where did you get your HDMI extender? I got mine from All4Cellular but it's quite short. Will have to get another HDMI one if the usb cable you recommended works.
Click to expand...
Click to collapse
Here's what I am thinking about doing:
http://www.ebay.com/itm/140626354628#ht_2821wt_1177 or http://www.ebay.com/itm/Micro-HDMI-...ultDomain_0&hash=item415eac6dc0#ht_2821wt_980
http://www.amazon.com/HDMI-Female-M...YPB4/ref=sr_1_2?ie=UTF8&qid=1329854686&sr=8-2
then the hdmi cable that came with our phone:
http://www.amazon.com/Motorola-Stan...QTA8/ref=sr_1_8?ie=UTF8&qid=1329854856&sr=8-8
The HDMI certainly looks like it may work but the reason I didn't buy that product from ebay a few weeks ago was because it was $50. Now miraculously, it's only $6. Maybe I'll get that if the USB cable I just bought that was suggested works a few posts back.
misiek93 said:
why wouldn't they? Cheap build quality that doesn't include the data wires? Hell I'll be willing to splice two cables together to get our desired effect, the only problem is that cords with a female micro usb are incredibly hard to come by
Click to expand...
Click to collapse
This micro usb extension cord explicitly states that all 5 wires are connected (compatible with droid bionic for the purpose of docking with a case on the phone):
http://www.ebay.com/itm/Micro-USB-E...395?pt=LH_DefaultDomain_0&hash=item335d13272b
I bought the HDMI extension cable and the USB cable above. I have a lapdock so I'll post if it works.
everything asked/answered in here is already covered in the original thread:
http://forum.xda-developers.com/showthread.php?t=1376679
robrj said:
This micro usb extension cord explicitly states that all 5 wires are connected (compatible with droid bionic for the purpose of docking with a case on the phone):
http://www.ebay.com/itm/Micro-USB-E...395?pt=LH_DefaultDomain_0&hash=item335d13272b
I bought the HDMI extension cable and the USB cable above. I have a lapdock so I'll post if it works.
Click to expand...
Click to collapse
The HDMI cable seems to work. On the lapdock, with just the HDMI cable hooked up, it functions like it was it's an entertainment center.
The USB cord will need to be modified a little bit. I can't get it to seat right on the USB jack of the dock. I'll need to shave it down a bit as it doesn't sit down snugly.
robrj said:
The HDMI cable seems to work. On the lapdock, with just the HDMI cable hooked up, it functions like it was it's an entertainment center.
The USB cord will need to be modified a little bit. I can't get it to seat right on the USB jack of the dock. I'll need to shave it down a bit as it doesn't sit down snugly.
Click to expand...
Click to collapse
I ordered the USB cable and experience this same problem, though I am waiting for my hdmi parts to come in (by April 6th I should have all my parts...). The cable itself works flawlessly as a micro usb extension cable when connecting it to the computer.
again as mentioned in the other thread, you want to be careful with the 5v coming out that micro hdmi port. for connecting back to your phone would be no issue, as the phone charges using this voltage, but hooking the lapdocks micro usb up to a host device probably wont appreciate the 5v coming back up the cable, where normally the usb device would be pulling power from said host, not providing it.
one suggestion is to just clip the red wire inside your micro usb cable/adapter.
btw the adapters i use do fit snugly side by side, without modification.
I've been following this thread for a little while now, and I wanted to share something I found.
I was looking at the Motorola Travel Webtop adapter. And I was curious to see whether it could be tweaked to suite our needs. I naively thought/hoped that I could flip the connectors in the device to make a small adapter to connect the Atrix to newer Lapdocks. Unfortunately as you can see in the pictures below (sorry not enough posts to link to the pictures) the two connectors are connected via a PCB not wires or a ribbon cable. Although I still have high hopes that I can de-solder the HDMI and USB connectors, and use a small length of flat ribbon cable to connect them and then re-positions the connectors in the case, to build a micro adapter to use the Atrix on the newer Lapdocks. Should this fail this will at least prevent others from making the same mistake, and solve the mystery of what's really inside the Webtop Travel adapter.
Do any one know if this Micro HDMI Cable would work for Lapdock.
http://www.ebay.com/itm/1-Feet-HDMI...s_Adapters&hash=item416612cecb#ht_1149wt_1187
Description says for Asus tf201 MEMO ME171.
I believe all Cables are standard. Can this used to Atrix 4g with Lapdock?
I have otterbox case for Atrix and don't want to Remove cover everytime to plug in Lapdock.
I'm looking for a USB 'B' (the one that looks like a square) to micro to connect my s3 to a DAC. I know that there a micro to female USB, and USB A->B, but I'd rather not have to deal with all that for convince. Is there anywhere I can get the cable I'm looking for?
Or if anyone knows where I can get the 2 connectors I could make it myself, but I haven't found someone who sells decently priced USB connectors.
For the DIY soldering required end of things check out SparkFun https://www.sparkfun.com/products/9614 (the have other parts as well).
I got some from E-bay a while back as well. http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=140737641542&ssPageName=ADME:L:eek:C:US:3160
For all things cable related the answer is usually http://www.monoprice.com/. The definitive supplier of good quality reasonably priced cables.
I cant find any such cable, why not just use the converter cables?
all you need is a male micro to female usb type a and you can use your regular usb male a to usb male b cable
you can get it pretty cheap on amazon
you can try to make your own, if you already have these spare cables you will have to sacrifice them
here are the pin diagrams http://www.allpinouts.org/index.php/USB_-_Universal_Serial_Bus (the 11 pin micro usb model is used for hdmi out)
you might want to read through this thread as well as it asking the same thing you want (just a mini-b instead of b)
http://www.head-fi.org/t/628374/samsung-galaxy-s3-to-dac-usb-micro-b-male-to-mini-b-male
Hooking one end of a USB cable type to another end is uber easy.
Just splice the four wires together.
Tape it up if you don't solder.
Otherwise, the Headfi link posted above is a good start. Those guys are always looking up weird ways to hook up the phone to a DAC. Here's another good thread where I remember someone looking for something similar to what you are. It's buried deep in a zillion page thread though.
http://www.head-fi.org/t/595071/android-phones-and-usb-dacs/1620
So I had installed a 2012 Nexus 7 in my car dash. That went relatively easy since you could just move the ribbon cable for the charge port and plug almost any cable into it. I have it apart and decided to upgrade to the 2013 version. The problem is the screen is attached to the same board the Micro usb port is soldered to and I have almost no room on the side of the tablet. It being a Hair taller is killing me. Does anyone know where I can get a very low profile micro usb cable? Something similar to what is attached to this charger. Need it to have data as well. Or if anyone has any ideas on what could be done I'd like to hear.
http://www.amazon.com/Wireless-Univ...2355266&sr=8-3&keywords=universal+qi+receiver
I want to use 90 ° micro usb cable, that would not fit?
An Idea
The board with the micro USB can easily be removed with a small screwdriver so it would just hang behind the nexus inside the car. That's no good if you plan on using the nexus like a regular tablet.