Who all would possibly be interested in something like this?
I'll be looking into making one, and I'm posting this here so that others could give it a try as well.
I, as possibly many who've gotten off the iOS bandwagon probably have some Apple-related audio accessories which rely on the infamous dock connector.
Because of Sammy's lovely implementation of 'docking' modes, using an adapter of sorts it's possible to both charge the phone and send audio through USB!
Basic idea:
The iPod's dock connector pinout is as follows: 5 and 6 are R/L audio in, 1, 2, and various others are grounded, and pin 23 is +5V.
The orginal Desktop Dock use data +/- as the audio line. But you need to jump pin 4 with a 365K resitor to activate this mode.
PIN:
1 : VCC
2 : D-: AUDIO LINE OUT L/R
3 : D+: AUDIO LINE OUT R/L
4 : SENSE ( CONNECT WITH SMALL 365K TO GND )
5 : GND
Click to expand...
Click to collapse
That snippet was gotten from: forum.xda-developers.com/showthread.php?t=1249775
Connect the corresponding wires, and it should in theory, allow us to use one connector to output audio to any of the docks. Obviously there's no way to control media playback via the dock itself, but I figure this beats using the line-in that some docks do have.
I'll be looking into whipping up an adapter for such a thing, and felt like sharing the idea to those who might be able to do so before I can or would like to try themselves etc.
However, has anyone else considered something like this? I'm speaking specifically about taking advantage of the GS2's docking mode, as a similar adapter was made with an audio input cord. Comments or thoughts?
I didn't feel this was something to be posted in either Q&A or Accessories, however if I was wrong in doing so please by all means mods move it to where it belongs.
Sounds like a good idea. Make a video showing us the results.
Cheers
i guess the first attempt would be to take an iphone-usb cable, microusb cable and the resistor
remove the plastics, wire accordingly, test and in case of success solder
parts of the procedure are the same as they are for makeing a jig
If something like this could be made and made to look "clean" that would be AWESOME!!!
I just made one with jack end, it is working, thanks for the pinout !
Will try to report about SQ later.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i know its not micro but does the same job
http://www.mobilefun.co.uk/cablejiv...put-adapter-for-apple-30-pin-docks-p29935.htm
they're soon releasing one with a micro usb power lead too
cablejive.com/products/dockBossplus.html
Anyone know where I can buy the 365k resistor in the uk?
Sent from my GT-I9100 using Tapatalk
tomqman said:
Anyone know where I can buy the 365k resistor in the uk?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
uh, in a electronic components shop?
Honestly, find yourself a local shop with electronics, and buy any resistor between 355k and 375k, it should work just fine. The smaller the better, 0,125W will do just fine.
Ah i thought it had to be exactly 365 . and only have a very small crappy electronics store were I live.
Will this do
http://www.ebay.co.uk/itm/360K-Ohm-Carbon-Film-Resistors-1-4W-0-25W-RoHS-x-100-/160654707509
Sent from my GT-I9100 using Tapatalk
tomqman said:
Ah i thought it had to be exactly 365 . and only have a very small crappy electronics store were I live.
Will this do
http://www.ebay.co.uk/itm/360K-Ohm-Carbon-Film-Resistors-1-4W-0-25W-RoHS-x-100-/160654707509
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
TBH, I'd go to the crappy small store. Do you really need 100/1000 of those resistors?
The ones from eBay are 0,25W. Those could be to big to fit in the plug. If you're positive you don't want to find a local seller, try these, but those are 1000pcs :
http://www.ebay.co.uk/itm/1-6-Watt-360K-ohm-5-Through-Hole-Carbon-Film-Resistors-/200655439530
Another thing to consider. Look at the delivery times on eBay.
I did it with a 0.25W resistor (from the ebay 100 pack), it fit the plug.
Related
Hi Guys,
I have ASUS p320 winMo phone. I am searching for a miniUSB to 3.5mm adapter for connecting normal earphones to the phone...
There are plenty available for HTC phones and i'm sure ASUS has similar mini USB interface as HTC but problem is HTC have extUSB which has slightly different shape than regular miniUSB...extUSB pin is curved one side only unlike miniUSB which is curved at both ends...so it can not fit my phone
Are there anywhere selling miniUSB to 3.5mm adapter, which ship internationally and preferably having form factor without wires like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Regards,
the difference between miniUSB and extUSB is that ext carry analog audio
where miniUSB is just a digital serial interface as in most of it not being audio
plugging a 3.5mm headset or otherwise audio device into an miniUSB is like
trying to connect a mic to a fax
Actually asus port is extUSB(ie has 11pins) but its port shape is miniUSB...
After much searching, I couldn't find anything like this for my Asus P565/XDA Zest. I ended up with one of these:
http://www.phonesreview.co.uk/2007/...lessly-blasts-tunes-from-phone-to-hifi-or-pc/
If you don't mind the extra pocket space...
Ok guys, i managed to fit the HTC adapter which i've bought for my asus by filing the extUSB to minUSB
it now fits. When i plug in the adaptor connected with an earphone i do get the handsfree icon on my phone....but when I play i don't get any sound in my earphones..
I fear that some of things i tried with the adapter before filing it may have damaged it, so there's no sound now...
Do you guys think it would work if I should get a new adapter and file it again since I do get the earphone icon on my device when i connect it?
This one has some mixed reviews on it...
http://www.amazon.com/gp/product/B000UHY6XU
Seen this on ebay...will this suit? http://cgi.ebay.co.uk/Mini-USB-to-3-5MM-Headset-Jack-Adapter-for-MOTOROLA-V3_W0QQitemZ350200266843QQcmdZViewItemQQptZUK_MobilePhones_MobilePhoneAccessories_MobilePhoneBatteries?hash=item518990005b&_trksid=p3286.c0.m14&_trkparms=72%3A1683%7C66%3A2%7C65%3A12%7C39%3A2%7C240%3A1318%7C301%3A0%7C293%3A1%7C294%3A24
wovens said:
Seen this on ebay...will this suit? http://cgi.ebay.co.uk/Mini-USB-to-3-5MM-Headset-Jack-Adapter-for-MOTOROLA-V3_W0QQitemZ350200266843QQcmdZViewItemQQptZUK_MobilePhones_MobilePhoneAccessories_MobilePhoneBatteries?hash=item518990005b&_trksid=p3286.c0.m14&_trkparms=72%3A1683%7C66%3A2%7C65%3A12%7C39%3A2%7C240%3A1318%7C301%3A0%7C293%3A1%7C294%3A24
Click to expand...
Click to collapse
I have one of these too. Same shape, but wrong number of pins so it doesn't work
Mafioso said:
When i plug in the adaptor connected with an earphone i do get the handsfree icon on my phone....but when I play i don't get any sound in my earphones..
I fear that some of things i tried with the adapter before filing it may have damaged it, so there's no sound now...
Click to expand...
Click to collapse
This is the same thing I get with that Motorola adapter. I assume that the adapter you have doens't have the correct number of pins either. I don't think you've damaged the socket at least
Found this on ebay. Not so mini but at least you can plug your own headphones into it.
EDIT: Or this is smaller and without the microphone, just not quite as small as the HTC adaptors.
shuflie said:
Found this on ebay. Not so mini but at least you can plug your own headphones into it.
EDIT: Or this is smaller and without the microphone, just not quite as small as the HTC adaptors.
Click to expand...
Click to collapse
I think the second adapter is a bit too long & unflexible. The first one though, considering I now use what is essentially an external MP3 player, looks promising and will no doubt provide better audio quality. I'll check that out, thanks!
Blade0rz said:
I have one of these too. Same shape, but wrong number of pins so it doesn't work
This is the same thing I get with that Motorola adapter. I assume that the adapter you have doens't have the correct number of pins either. I don't think you've damaged the socket at least
Click to expand...
Click to collapse
hmmm...it does has correct no of pins: 11...but I don't know if adapter is damaged or pin mapping is incorrect...
anyways, I've ordered the adapter of eBay link..
I've ordered one from 4u-kidi, Hope that works with my Asus P565...
ok, i recieved the adapter which i ordered from eBay link and it works
farshid.tavakoli said:
I've ordered one from 4u-kidi, Hope that works with my Asus P565...
Click to expand...
Click to collapse
I received the adapter too and it works with Asus P565.
Thanks "shuflie",
www.Cablejive.com Has some great audio accessories, but the ones I've listed below are absolutely needed if your car is setup for iDevices and you have ANDROID.
The first converts your iPod/Iphone interface to a standard 3.5mm Audio Headphone Jack and allows for listening to your phone through an existing iPhone/iPod interface in your car or Home. ($22.96)
http://www.cablejive.com/products/dockBoss.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The second is the same thing, only it also adds a Micro USB charging solution built into the same cable. ($29.95)
http://www.cablejive.com/products/dockBossplus.html
Please Hit Thanks if this helps you out!
That would be handy. We have a home unit I could use this with.
Thanks!
Use code HOLIDAY15 for 15% off. Takes the total down around $5.
Yeah I originally bought the audio only version but Just ordered the combo so I'd have one less thing to take up my cigarette lighter adapters. Gonna gift the old cable as it still looks and works like brand new. P.S. they are pretty fast shipping wise as well.
I want to get this for my Volvo but not sure if it will work. My Volvo Ipod adapter plays the playlists on the ipod, and I'm able to play slacker. ANyone think this will work with a Volvo ipod kit?
tomtbone said:
I want to get this for my Volvo but not sure if it will work. My Volvo Ipod adapter plays the playlists on the ipod, and I'm able to play slacker. ANyone think this will work with a Volvo ipod kit?
Click to expand...
Click to collapse
They only list the VW and Audi as not Compatible. I think you'll be fine. Either way if it doesn't work it won't be hard to return or resell.
Neat, I will definitely think about getting this
Here's hoping you're not a spammer! (Kind of a suspicious post honestly)
argh they are sold out
AlokikolA said:
Neat, I will definitely think about getting this
Here's hoping you're not a spammer! (Kind of a suspicious post honestly)
Click to expand...
Click to collapse
Serves me right to be called a spammer lol. I switched to iPhone with the iPhone 4 and just came back to android for the Galaxy 2. Since I switched everything for iPhone I had to find a way to get my new Galaxy II hooked to all my docks and car kits I spent hundreds on. Buy or do not buy, but I have been hanging around here since 2007 and thought it was about time I contribute.
I've been using a female dock adapter I picked up from Deal Extreme, but it picks up electric interference when I use it in the car. Anybody else experience this?
patthew said:
I've been using a female dock adapter I picked up from Deal Extreme, but it picks up electric interference when I use it in the car. Anybody else experience this?
Click to expand...
Click to collapse
I haven't had any of that out of the audio only adapter I have. (the one on top) The charging and audio adapter arrives tomorrow hopefully, so I'll let you know after I've had a chance to test.
Yes... thanks. I need one of these.
coojoe1000 said:
I haven't had any of that out of the audio only adapter I have. (the one on top) The charging and audio adapter arrives tomorrow hopefully, so I'll let you know after I've had a chance to test.
Click to expand...
Click to collapse
Well it ended up being at home waiting for me yesterday. I can report that with power and audio I have no feedback or noise in the background. Just clear music. I think those other systems just aren't grounded as well. Hope this helps your decision.
Just ordered this from eBay:
http://www.ebay.co.uk/itm/New-Galax...915?pt=LH_DefaultDomain_0&hash=item19d55df8ab
But has anyone else bought the same adapter from anywhere and does it work?
Hi can you share the result once you got it . Thank you
Sent from my GT-I9300 using xda app-developers app
Will do.
I just received the samsung adapter today from amazon for 8.00 works perfectly
Sent from my SPH-L710 using xda premium
Does it have all 11 pins? The OEM doesn't have the data pins in the USB part (2 and 3) and I am looking for a fully populated 11 pin adapter.... for modding.
Sent from my SCH-I535 using xda app-developers app
Just got it today and my Tv shows it's outputting at 1080i and everything's fine with the A/V sync.
And it's difficult to see the pins but all I can see is 5 pins on the male and female sides.
I just bought a s2 mhl cable and an 11 to 5 adapter, all working fine.1080i 60hz the tv says
the adapter is the short metal type, it has all pins populated and a small pcb between the connectors, great for modding..
this is same as mine, my seller seems to have gone.....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://www.facebook.com/photo.php?fbid=10151521598190130&set=a.10151521598135130.599568.633050129
monoprice has these also. Works well with their adapter.
http://www.monoprice.com/products/p...=10833&cs_id=1083314&p_id=9716&seq=1&format=2
Heres a quick vid of my adapter working with an S2 mhl cable, working on a s3 and a note2
https://www.youtube.com/watch?v=2fhBikVZXPg
heres how they get 11 pins on the new style plug...
OK I have now opened another 5 to 11pin connector, this is the moulded plastic variety...
This is an image of what mine looks like, but i did not use this supplier, i just bought on ebay...
..and inside
I was thinking of getting an usb-hdmi adapter to connect the s3 to my hdtv sometimes. Since is just for ocassional use, i was looking for something cheap and i found this one on ebay:
http://www.ebay.ie/itm/Black-HDTV-HDMI-Adapter-Micro-5-to-11-Pin-For-Samsung-Galaxy-S3-i9300-/190827510197?pt=Other_Tablet_eReader_Accessories&hash=item2c6e34b9b5
But i haven't found much reviews on it and since its so cheap im wondering if it works well.
Anyone bought this that can give me some feedback on it? Do you think its good enough or i should look for the more expensive ones?
Thanks
griffin_1 said:
I was thinking of getting an usb-hdmi adapter to connect the s3 to my hdtv sometimes. Since is just for ocassional use, i was looking for something cheap and i found this one on ebay:
http://www.ebay.ie/itm/Black-HDTV-HDMI-Adapter-Micro-5-to-11-Pin-For-Samsung-Galaxy-S3-i9300-/190827510197?pt=Other_Tablet_eReader_Accessories&hash=item2c6e34b9b5
But i haven't found much reviews on it and since its so cheap im wondering if it works well.
Anyone bought this that can give me some feedback on it? Do you think its good enough or i should look for the more expensive ones?
Thanks
Click to expand...
Click to collapse
NO!
go read it again...
I bought this on amazon. Few bucks more than what I got for but actual Samsung, us seller works great
http://www.amazon.com/dp/B0089VO86Y/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Sent from my SAMSUNG-SGH-I747 using xda premium
Hi guys. this is an update of my previous post. http://forum.xda-developers.com/showthread.php?t=2142357
Before, I made the connector to work as smart dock.
http://www.youtube.com/watch?v=EFzX6NlKJBU&feature=youtu.be
And now I tried to make it little more compact, avoid extra connections, make it easy to use. View attachment 1882279
I wanted only one cable will come from the phone and to do so i needed 1 cable that contains 8 wires, but I couldnt find any round cable that has 8 wires in it. at last i cut my hdmi cable !! :cyclops:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
there were about 13 or more wires in it, so i cut little part from the cable. You can order a cheap hdmi cable and cut it if you want.
(( After cutting the part I joint it bk and put some glue so the wires stay separate from each other. Then I covered it with some tape and more glue outsideof the cable :laugh:
now hdmi cable is working fine too :silly: ))((skip if you dnt want to reuse the hdmi cable))
Now comes the hard part. I soldered 8 wires as shown in the diagram, and made a hole on the 5 pin to 11 pin tip, and placed the cable as in picture and closed it .after that its pretty easy. Just connect wires with a micro usb cable as shown in diagram. I connected the usb hub instead of usb female port in the diagram. And the usb hub had enough space inside to put all the joints in .I just had to make another hole in usb hub to take out the micro usb for mhl cable
So total cost of making this dock was around 20 to 25 $ ( including mhl adapter and usb hub)
http://www.ebay.com/itm/Micro-5-Pin...106400?pt=PDA_Accessories&hash=item2c6d0ca5a0
http://www.ebay.com/itm/USB-2-0-A-fe...-/270798436083
http://www.ebay.com/itm/True-High-S..._USB_Cables_Hubs_Adapters&hash=item3f1ade6743
http://www.ebay.com/itm/25pk-40-2K-...466?pt=LH_DefaultDomain_0&hash=item564c6ff67a
http://www.ebay.com/itm/Premium-1-3...508585?pt=PDA_Accessories&hash=item43ba4e64a9
http://www.amazon.com/dp/B00AQ1W77C/ref=pe_175190_21431760_3p_M3T1_ST1_dp_1
Just awesome! !!
Again Excellent work bro!!!
Just awesome and smart work! !
Keep it up!!
necomer said:
After cutting the part I joint it bk and put some glue so the wires stay separate from each other. Then I covered it with some tape and more glue outsideof the cable :laugh: now hdmi cable is working fine too :silly:
Click to expand...
Click to collapse
I'm just trying to keep these steps clear in my mind...is the above step just so you can reuse the HDMI cable you had cut the section out of? It has nothing to do with the actual dock, right?
troycarpenter said:
I'm just trying to keep these steps clear in my mind...is the above step just so you can reuse the HDMI cable you had cut the section out of? It has nothing to do with the actual dock, right?
Click to expand...
Click to collapse
Yeah. You are right. I just did that so I can reduce extra cables. You can skip that part if extra cables dont bother you
If you dnt want to reuse the cable. ... just through it or keep it to use in something else
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
What about the 40.2K resistor? where did you put it?
syfxever said:
What about the 40.2K resistor? where did you put it?
Click to expand...
Click to collapse
Did you see the diagram ? You can get idea from there.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
wow
very nice... thanks for the DIY :good:
Great Job
You built a cool little adapter for yourself, I'm looking into doing something like this but I need help because I want to add charging on top of everything else you can do with the dock you made.
Have you looked into charging at all? or tried it yourself?
hi,
has anyone found a usable docking station for the opo?
all my docking stations that i have don't fit since the opo has the mini usb port in backwards %)
any suggestions?
thanks.
cheers,
buster
Sent from my LG-V500 using XDA Premium 4 mobile app
They are out there. A quick eBay AU search (located near Melbourne):
http://www.ebay.com.au/itm/OnePlus-...AU_MobilePhoneAccessories&hash=item3ce05c5e25
So there must be more out there!
free postage - I highly doubt that if I would ordered it (to Germany) but yeah - something like that. Now i just have to find a less geographically challenging solution.
But thanks for the suggestion.
cheers
Buster
EverDock
There is a company called EverDock that was on KickStarter, it features a DOCK where you can switch the plug from forward or reverse, plus you can either use it for Iphone, Ipad, Android Mini USB. There is also a dock they sell that allows two devices to be charged at one time. Here is a link
Amazon
http://www.amazon.com/s/?ie=UTF8&ke...vptwo=&hvqmt=b&hvdev=c&ref=pd_sl_6o9q7qw29k_b
Main Company
http://fuzdesigns.com/
either way you can see you can use it for different products. I hope this helps. I have the single one.
-AkWingnut
Any docks made specifically for OPO?
That would be awesome. Been looking for that.
An ideal one would be made out of bamboo, and with bamboo back cover...
I really dunno if this works, but I found a suggestion in another forum: http://www.amazon.de/dp/B00JGRIKOQ/ there I was told this works with the OPO, too.
stm999999999 said:
I really dunno if this works, but I found a suggestion in another forum: http://www.amazon.de/dp/B00JGRIKOQ/ there I was told this works with the OPO, too.
Click to expand...
Click to collapse
That one breaks really easily. I've gone through 2 already (removing the phone from the dock eventually breaks the pegs that holds the cable in place).
I ordered this one and like it so far: http://www.amazon.com/gp/product/B009L6AHLQ/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
napes22 said:
That one breaks really easily. I've gone through 2 already (removing the phone from the dock eventually breaks the pegs that holds the cable in place).
Click to expand...
Click to collapse
Can you tell me what exactly breaks on this docking station? which pegs? why at the cable? the cable is on the backside, how does something break there when the phone is being removed?
BTW, stations for the HTC One M8 should be compatible I was told. Has anyone experiences with this?
could this be an alternative?
http://www.amazon.de/Emartbuy®-Funktion-kompatibel-Docking-Ladegerät/dp/B00KC0X98I
or such a universal usb docking station - as long as the usb plug has the right direction?
like http://www.amazon.de/exec/obidos/ASIN/B00JFLV3KG/ref=nosim/andrhilfdeand-21 or http://www.ebay.de/itm/Universal-Do...e-Nexus-5-HTC-Desire-S-Desire-Z-/400802464581
Or is there more to watch out like angle of the plug or the distance to the backside?
Try this one.. It is compatible with OnePlus One.. i have been using this for the past 2 days without problem
http://www.aliexpress.com/snapshot/6357642981.html
assassin0408 said:
Try this one.. It is compatible with OnePlus One.. i have been using this for the past 2 days without problem
http://www.aliexpress.com/snapshot/6357642981.html
Click to expand...
Click to collapse
it looks like the one from above: http://www.amazon.de/dp/B00JGRIKOQ/
but I am not sure: where does the phone have íts secure stand? Is the phone held by the usb connector only? My last shown examples above have a higher back, which can hold the phone very secure and protect the usb connector against the pressure when using the phone in the dock.
Check out the Lambda-Dock. The connector can be turned and its produced in germany...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sold through: http://kai-altstaedt.dawanda.com/