First off - let me disclaimer this:
Some people want the Fort Knox of cases. They are clumsy with their phone. They've experienced dropping their phone several feet to the ground. They want impact protection. The G-Shock of phone cases. And they aren't afraid to carry something the size of a brick with the appearance of something from Toys 'R Us in trade for that protection. No problem. Obviously there's no shortage of THOSE cases.
My problem is that there ONLY seem to be cases made for those kinds of people.
I'm looking for a case that more or less barely wraps the phone - not for impact resistance, but abrasion resistance, light protection from scratches. I keep my phone in my pocket 100% of the time, and I'm more than respectfully careful when it's out - call me paranoid. But I know from experience with [all my other phones that I've never bought a case for] that light scratches can appear over time.
One of the BEST things about the SGS2 is the thin profile of the phone - and I'm already disappointed to have lost 1mm of that thinness, but willing to live with it. With a phone this size already, I'm not willing to lose millimeters more. It's supposed to be a thin phone.
Jokes about Apple lawsuits aside, I wish there were a case more akin to the iPhone 4's bumper case - something that offered just minimal protection - when setting the phone down, perhaps a little impact protection of the phone were to fall - but not taking away from the overall thin profile of the phone with an enveloping, thick back panel. Hell, if I eventually had to replace the battery door, I can do that for less than the cost of a new case anyway.
Are there any cases for guys who want thin? Who don't want it for impact protection, just simple, pocketable, wear protection against minor scratches and the like? And - can that case look classy?
I've only seen this one, but it's for the regular SGSII, not the sprint version:
http://www.case-mate.com/Samsung-Ga...-S-II-Barely-There-Brushed-Aluminum-Cases.asp
Even that wraps fully around the phone and adds thickness... it merely offers the promise of being thin.
What's the thinnest option out there, if impact resistance weren't a concern?
I got my tpu case on with out the back battery cover, and it feels fairly thin, and will still provide some protection. The case is without the back cover stay flush with the camera. I am going to order another one with matte finish.
The TPU's are good and cheap too. A good holdover until the barelythere comes out...which I predict will be within a couple weeks.
---------- Post added at 05:08 PM ---------- Previous post was at 05:01 PM ----------
mrpickem said:
The TPU's are good and cheap too. A good holdover until the barelythere comes out...which I predict will be within a couple weeks.
Click to expand...
Click to collapse
Maybe sooner
Case-mate - Brushed Aluminum Barely There Case, Epic Touch 4G
The TPU-cases are really nice, and I was surprised that it didn't add much thickness at all. I did post a review here, along with some pictures.
The carbon kickstand case you can get at the store is perfect imo. The phone feels no bigger with it on.
I wish Rearth (http://www.rearthusa.com/) would make a case for the ET4G, but last I emailed them they weren't intererested at this time since A) it wasn't out yet, and B) they didn't anticipate high demand for it.
The reviews on the international SII cases were really good too :-/
+1
Scaplet said:
The carbon kickstand case you can get at the store is perfect imo. The phone feels no bigger with it on.
Click to expand...
Click to collapse
Sent from my SPH-D710 using XDA App
How's that sprint kickstand case? Is it the fold into a triangle kick stand or an actual bar that pops up? It looks similar to my buddy's trianglish plastic kickstand case on his tmobile GSI vibrant and that thing is a piece of junk. Fits the phone like it was chisselled out of plastic, looks like $hit.
For $30 it better be sexy.
jirafabo said:
How's that sprint kickstand case? Is it the fold into a triangle kick stand or an actual bar that pops up? It looks similar to my buddy's trianglish plastic kickstand case on his tmobile GSI vibrant and that thing is a piece of junk. Fits the phone like it was chisselled out of plastic, looks like $hit.
For $30 it better be sexy.
Click to expand...
Click to collapse
Not a triangle but a little wider than most bar kickstands I've seen. My gripe with that case is it doesn't cover the top and bottom of the phone, it fits more like a holster than a case. And for $30 thats IMO unacceptable.
I'm waiting for seidio to make a case for this phone, loved the innocase I have on my hero and it wasnt very thick at all.
How about a stick on skin if you want the thinnest "cover" possible?
jirafabo said:
How's that sprint kickstand case? Is it the fold into a triangle kick stand or an actual bar that pops up? It looks similar to my buddy's trianglish plastic kickstand case on his tmobile GSI vibrant and that thing is a piece of junk. Fits the phone like it was chisselled out of plastic, looks like $hit.
For $30 it better be sexy.
Click to expand...
Click to collapse
I'm using a gloss-black TPU at the moment (and loving it) but I'm really considering one of those kickstands. I've put my phone in one a few times. It looks good but for the money it feels really inadequate.
Thanks for all the good suggestions...
I did actually read that review of the TPU case... one of my coworkers has one on his 3D. In his case, it covered the camera hump and made the phone thinner - the implementation on this phone seems much better.
For the money, it's tempting to at least as a stop gap to use for a few months to see what becomes available - or I'll just use none as a stop gap, like I've done with all my other phones. This one just seems like a phone worthy of babying more than I already do baby my lifeline.
A skin... I'm not aware of any, but I'm initially cringing thinking of what kind of vinyl wrap that may imply... cartoon characters, immature sayings, dragons and swords, flames, or what? Maybe something that's just a texture or color?
geolemon said:
Thanks for all the good suggestions...
I did actually read that review of the TPU case... one of my coworkers has one on his 3D. In his case, it covered the camera hump and made the phone thinner - the implementation on this phone seems much better.
For the money, it's tempting to at least as a stop gap to use for a few months to see what becomes available - or I'll just use none as a stop gap, like I've done with all my other phones. This one just seems like a phone worthy of babying more than I already do baby my lifeline.
A skin... I'm not aware of any, but I'm initially cringing thinking of what kind of vinyl wrap that may imply... cartoon characters, immature sayings, dragons and swords, flames, or what? Maybe something that's just a texture or color?
Click to expand...
Click to collapse
There are a number of companies that make removable, transparent "full body" skins. I've had good luck with both Skinomi and Zagg protectors in the past.
mrpickem said:
The TPU's are good and cheap too. A good holdover until the barelythere comes out...which I predict will be within a couple weeks.
---------- Post added at 05:08 PM ---------- Previous post was at 05:01 PM ----------
Maybe sooner
Case-mate - Brushed Aluminum Barely There Case, Epic Touch 4G
Click to expand...
Click to collapse
Is this legit? Case-mate's site doesnt have any products for the Epic 4g Touch at all.
Ogre840 said:
I wish Rearth (http://www.rearthusa.com/) would make a case for the ET4G, but last I emailed them they weren't intererested at this time since A) it wasn't out yet, and B) they didn't anticipate high demand for it.
The reviews on the international SII cases were really good too :-/
Click to expand...
Click to collapse
I have a Rearth case for the international SGS2 and though it's a tight fit, it can be used on the ET4G. Bear in mind, some of the cutouts aren't aligned quite right, but I can use the camera and also charge with the case on.
This is the case I'm referring to:
http://www.rearthusa.com/Galaxy-S-2-_p_252.html
tgigh said:
Is this legit? Case-mate's site doesnt have any products for the Epic 4g Touch at all.
Click to expand...
Click to collapse
I dunno, I tried to order and it says I am not allowed to order this item.
mrpickem said:
I dunno, I tried to order and it says I am not allowed to order this item.
Click to expand...
Click to collapse
That's a reseller type site... according to a few other spots around the net, Case-Mate has the barely there, pop, and tough cases coming out starting 9/29 or so. Whether or not this is legit, I still cannot say... but hopefully.
Well, this may be good news. That aluminum one for the original GSII looks pretty classy, I would pick one of those up if available...
...and from that listing on CaseMate's actual website, I'm going to guess they'll be available pretty soon!
geolemon said:
Well, this may be good news. That aluminum one for the original GSII looks pretty classy, I would pick one of those up if available...
...and from that listing on CaseMate's actual website, I'm going to guess they'll be available pretty soon!
Click to expand...
Click to collapse
dmarden said:
That's a reseller type site... according to a few other spots around the net, Case-Mate has the barely there, pop, and tough cases coming out starting 9/29 or so. Whether or not this is legit, I still cannot say... but hopefully.
Click to expand...
Click to collapse
mrpickem said:
I dunno, I tried to order and it says I am not allowed to order this item.
Click to expand...
Click to collapse
Just emailed support to ask with a link to the item listed; I should hear back in next couple of days. From the listing, it looks like the kind of site that sells to 3rd party vendors, and since the packaging says Sprint branded, I suspect this is meant for non-corporate Sprint stores. Just a guess, but I will update if I hear anything back.
PS I bought the kickstand case and I kinda hated it, returned it within the hour... felt flimsy and overpriced, and it was more of a bad holster than a case; barely held the phone in and the kickstand was very tough to un-clip. I never say a product is not for anyone, but it certainly wasn't for me.
geekaren said:
I have a Rearth case for the international SGS2 and though it's a tight fit, it can be used on the ET4G. Bear in mind, some of the cutouts aren't aligned quite right, but I can use the camera and also charge with the case on.
This is the case I'm referring to:
http://www.rearthusa.com/Galaxy-S-2-_p_252.html
Click to expand...
Click to collapse
Interesting to know that it will work, mostly. I've just been leaving feedback from various computers at work and at home via their feedback link hoping I they'll see a demand for it and make a case for the ET4G
Related
Check out the review with some Q&A here...
http://androidforums.com/htc-evo-4g/88106-sprints-body-glove-protective-cover-evo-4g.html
As for this vs the Siedio case, I'm thinking this one is a bit thinner and would fit in my pocket easier.
wow like the bodyglove cover.whats the price? and can i buy one online?
GHOST99K said:
wow like the bodyglove cover.whats the price? and can i buy one online?
Click to expand...
Click to collapse
It's 29.99 - and will be available at Sprint stores upon launch. You might be able to grab one now depending on how charismatic you are...
As for online, the online sprint store may be selling them - not sure, you'd have to check on the 4th.
Nice I like the look of that case and I just orderd the ghost armor case as you get the whole body armor for 14.99, the bodyglove might be better but I might use both, and then be covered for everything...
im usually not a fan of these type cases but i think ill grab it for the honeymoon period also
Will never get another body glove again. Their tabs break off all the time. Went through two of them in a month for my TP2.
damm i checked the sprint accessory online store and its not available yet i guess but ill b heading to the store to c if they got any before launch.so far got screen protector for the SUPERSONIC.
I've been searching online for the past couple of days for a case for my Evo. I really want this body glove case. I am going to stop by my Corporate Sprint Store tomorrow on my way to work to see if they have any and if they would let me buy one. I called them earlier last week about another matter and the store associate started talking about the Evo. When I told him I would have mine this past Friday he was shocked and wanted to see it. So maybe...and I mean maybe if I go up there show them my Evo and everything they may be nice and let me get one of the cases. Plus I have a Sprint Premier Account, so we'll see.
sanjsrik said:
Will never get another body glove again. Their tabs break off all the time. Went through two of them in a month for my TP2.
Click to expand...
Click to collapse
Has anyone had similar issues? Have you tried other cases? If so, what would you recommend for protection and as slim as possible...
keatre said:
Has anyone had similar issues? Have you tried other cases? If so, what would you recommend for protection and as slim as possible...
Click to expand...
Click to collapse
YES! I've had the exact same results with the Samsung moment case, the front panel is held on by 4 small plastic tabs.
These tabs easily break off just by taking the case on and off. I replaced my case twice after giving up completely and going naked. I'll never buy Body Glove again.
I would be very careful with the Body Glove or Seidio cases. I bought the Seidio Innocase II and put it on my iPhone 3GS on day one. When I got it ready for sale a few days ago, I removed the case to find some scratches on the chrome bezel. The felt on the rear protected the back just fine. If they lined the entire case with it, then it would be good. The bezel on the Evo appears to be shiny plastic, so I would expect it to scratch even easier than the metal iPhone bezel.
I've tried other cases...
keatre said:
Has anyone had similar issues? Have you tried other cases? If so, what would you recommend for protection and as slim as possible...
Click to expand...
Click to collapse
I have tried other cases, they are of the cheaper rubber cases that have this interlocking mechanism on top and bottom that were okay, the fit wasn't good but the cases were good. The unfortunate thing is that comparing a TP2 case with the Evo case is apples and oranges.
That IS until I saw that the Evo case is also a 2-piece snap on. If there is no sliding keyboard why then is it a two piece snap on and not a once piece hard case? The tabs break, pure and simple. If the reset button is under the back cover, every time you take off the back bodyglove cover, you risk breaking the tabs holding the case in place.
When I say I have gone through two bodyglove cases, I wasn't kidding. The thing looks good, until the case parts start randomly popping off because the tabs have broken off. Not really a protector then, is it?
sanjsrik said:
I have tried other cases, they are of the cheaper rubber cases that have this interlocking mechanism on top and bottom that were okay, the fit wasn't good but the cases were good. The unfortunate thing is that comparing a TP2 case with the Evo case is apples and oranges.
That IS until I saw that the Evo case is also a 2-piece snap on. If there is no sliding keyboard why then is it a two piece snap on and not a once piece hard case? The tabs break, pure and simple. If the reset button is under the back cover, every time you take off the back bodyglove cover, you risk breaking the tabs holding the case in place.
When I say I have gone through two bodyglove cases, I wasn't kidding. The thing looks good, until the case parts start randomly popping off because the tabs have broken off. Not really a protector then, is it?
Click to expand...
Click to collapse
Hmm, well thanks a lot guys, I've definitely changed my mind on this case. I'll probably go naked until Otterbox comes out with a case (in which case the honeymoon phase will be over, and I'll be more worried about long-term protection).
keatre said:
Hmm, well thanks a lot guys, I've definitely changed my mind on this case. I'll probably go naked until Otterbox comes out with a case (in which case the honeymoon phase will be over, and I'll be more worried about long-term protection).
Click to expand...
Click to collapse
Give the Sprint Silicone Case a try. I got it and love it. It's nice and cheap especially with a 25% premier customer discount. It covers everything, slips on easy and comes off easy, good fit, and it actually makes the power button easier to hit and feel.
http://shop.sprint.com/NASApp/onlin...=Carry+&+Protect&selectedAccessoryID=CZH1980R
Its pretty nice. I have it and its decently built. Only structural issue I see is by the volume keys. But otherwise seems quite solid.
I like the look of the case, very cyber, but if it splits the longest way around the edge& is only held together with little tabs, I'd look elsewhere. On a one-piece phone with no moving parts there is no sense in it. I'm looking at the Seidio since it has the smallest seam, it goes around the middle, and is made to be held in holster. I don't like shoving phones in my pocket any way and especially not this giant thing. Second choice might be the Sprint one with multi colors or the silicone one.
I love my Evo body glove
I bought My body glove from the Dover, NH Sprint store from wireless link. The thing is amazing picked it up for $20 (special discount)
When I bought my evo, they had that body glove case at the store for $20. I got it, and I like it. It almost has an "iron man" type of look to it. The thing I liked about it was that it was thick enough to protect the camera, meaning when you laid it down, the camera didnt touch anything.
It is a pain in the butt to take off though. It has the back piece and then a really cheap-feeling front piece, and they clip together around the phone. Its hard to un-clip them at that point. I've already bent the hell out of the side of the front piece, but it still looks alright.
Regardless of that, I'd say its worth getting.
i have it like above mentioned feels cheap when taking on or off but when on its great protects camera lense i have no complaints so far i might be grabbing one of those 3500mah batteries so ill probably have to change sooner or later
I've been searching every couple days since the phone was released only to find the shields, glare protectors, and skins... Finally they have the low cost cases that many users have come to love...
Judging by the looks on some, I'm not saying they are grade A, but having bought some for past phones, they are comparable to some of the $30 cases sold at some retailers
Example: cgi.ebay.com/Red-Hard-Snap-Case-Samsung-Captivate-AT-T-/270618346984?pt=PDA_Accessories {Sorry can't post links}
This is the same case (and seller) I have except mine is black. It looks, works, and feels great... Though it is a little hard to take off once it's on.
Sent from my SGH-i897
whats that case material called thats like not the rubbery silicone, but not a hard case? Its like a soft plastic that doesn't have a rubber texture.
eatkabab said:
whats that case material called thats like not the rubbery silicone, but not a hard case? Its like a soft plastic that doesn't have a rubber texture.
Click to expand...
Click to collapse
if the material you're describing is what I'm imagining (and as counter-intuitive as it sounds) it's rubberized crystal cases. (like the one in the first link)
it doesn't feel "rubbery", it feels smooth and soft-textured. nothing at all like the rubber you'd find on a shoe or tire.
eatkabab said:
whats that case material called thats like not the rubbery silicone, but not a hard case? Its like a soft plastic that doesn't have a rubber texture.
Click to expand...
Click to collapse
I believe you are thinking of TPU (Thermoplastic polyurethanes)? It's generally a material that is flexible but very smooth, and usually translucent.
Unfortunately I don't think there are any TPU cases yet for Captivate, but I think they are coming (they have them for the standard Galaxy S / Vibrant), but that's what I am waiting for as well.
pinoymutt said:
I believe you are thinking of TPU (Thermoplastic polyurethanes)? It's generally a material that is flexible but very smooth, and usually translucent.
Unfortunately I don't think there are any TPU cases yet for Captivate, but I think they are coming (they have them for the standard Galaxy S / Vibrant), but that's what I am waiting for as well.
Click to expand...
Click to collapse
yeah! whats the trade name for that stuff? Lexon or something, no?
eatkabab said:
yeah! whats the trade name for that stuff? Lexon or something, no?
Click to expand...
Click to collapse
Per Wikipedia, they have several trade names (but seems mostly from Pharma)
ELASTOLLAN (BASF & Elastogran)
PEARLTHANE (Merquinsa)
DESMOPAN (Bayer)
PELLETHANE (Dow Chemical) Sold to Lubrizol.
ESTANE (Lubrizol)
IROGRAN (Huntsman)
But in terms of cases, the only trade name I know of is that I believe Amzer calls their line of TPU cases "Luxe." Other places usually refer to the cases either as TPU or "Flexi Skin."
I'm personally waiting on the "Luxe" line from Amzer to be released at the end of the month for the Captivate.
http://www.amzer.com/Amzer-Luxe-Argyle-Skin-Case-Smoke-Grey-P88849.htm
I got the black version of this case and I'd say it's by far more attractive and more protective than the overpriced crap they have at the AT&T store.
I attached some pictures. Yeah, I rigged up a cradle for the phone out of some large zip-ties, and I must say, it works great. Don't be dissin'!
Yep, that's exactly the same one I have. The one thing I would say to notice about this is, that without a screen protector, and if you keep it in your pocket... this case just seems to be a "force dirt to collect in certain places" device. (Keep it in your pocket for a day or two and then take it off and see how much dirt is chilling out under your case)
cpc71783 said:
I got the black version of this case and I'd say it's by far more attractive and more protective than the overpriced crap they have at the AT&T store.
I attached some pictures. Yeah, I rigged up a cradle for the phone out of some large zip-ties, and I must say, it works great. Don't be dissin'!
Click to expand...
Click to collapse
Dude, that is an AWESOME zip-tie stand! EXCELLENT work!
Mmm.. I'm thinking of getting this one:
cgi.ebay.com/Samsung-Captivate-i897-New-Accessory-Case-Cover-/140438789201?pt=PDA_Accessories#ht_2551wt_1137
or this one:
cgi.ebay.com/Rubber-Black-Hard-Case-Cover-Samsung-Captivate-i897-/350383516190?pt=PDA_Accessories#ht_2394wt_911
what do you guys think would be good
pinoymutt said:
...
I'm personally waiting on the "Luxe" line from Amzer to be released at the end of the month for the Captivate.
http://www.amzer.com/Amzer-Luxe-Argyle-Skin-Case-Smoke-Grey-P88849.htm
Click to expand...
Click to collapse
Thats the one I want as well. Mainly cuz its got some cushion like the silicone ones but doesn't stick in your pocket like the silicone ones...
Only problem I have with it is the pattern on it. Its a nice pattern, but coming from the world of bberry, its been done and over done. I feel it might look a little busy with the translucency/being able to see all the original case detail under it.
any private messages with links to a case would be much appreciated. My captivate is due to touchdown on Monday.
Amzer Luxe style gel cases are available now at fommy dot com.
I originally owned the Body Glove, but was somewhat disappointed while testing GPS fixes to learn that it actually reduced GPS reception. I'm hoping the translucent/non-black Luxe will fit the bill.
K-mart Shopper said:
Amzer Luxe style gel cases are available now at fommy dot com.
Click to expand...
Click to collapse
Has anyone actually received one of these Amzer cases? Can they please just let us know how they like it?
Much appreciated
K-mart Shopper said:
Amzer Luxe style gel cases are available now at fommy dot com.
I originally owned the Body Glove, but was somewhat disappointed while testing GPS fixes to learn that it actually reduced GPS reception. I'm hoping the translucent/non-black Luxe will fit the bill.
Click to expand...
Click to collapse
can anyone else confirm this?
pinoymutt said:
http://www.amzer.com/Amzer-Luxe-Argyle-Skin-Case-Smoke-Grey-P88849.htm
Click to expand...
Click to collapse
I believe this is available now. This looks very nice. Much better then the all black. Prob order it tonite.
Sent from my Nexus One using XDA App
Is there another place I can get the hard snap on cases other than ebay? Keep trying to catch them with some in stock at the store and they never have them...and I'm sure they are like $30 there...
I just got my S-line case (black) from eBay and I love it. It adds very little bulk, seems like it will do a good job protecting my phone, and looks very nice.
Definitely worth the $5!
Edit: Pics added
Jaxidian said:
I just got my S-line case (black) from eBay and I love it. It adds very little bulk, seems like it will do a good job protecting my phone, and looks very nice.
Definitely worth the $5!
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
I have one as well. Love it. Too bad the car dock doesn't work with the case on. I hate having to take it off, but at least it's pretty easy.
ttran97 said:
I have one as well. Love it. Too bad the car dock doesn't work with the case on. I hate having to take it off, but at least it's pretty easy.
Click to expand...
Click to collapse
Agree with you on all fronts, including car dock and easiness of taking the case off.
Sent from my ADR6400L using XDA App
Link?
10char
want a droid said:
Link?
10char
Click to expand...
Click to collapse
Was easy enough to find:
S-Line Ebay Case
For what it's worth, I got the black one, but I've heard better comments on the smoke one when I was doing my research.
Sent from my ADR6400L using XDA App
is the material that soft gel/rubber type? they look "sticky" lol how does it feel in the hand?
pretty cool looking, does it hold up?
is the inside rubber/silicon?
viceversa said:
is the material that soft gel/rubber type? they look "sticky" lol how does it feel in the hand?
Click to expand...
Click to collapse
There seems to be 2 types of materials, 3 finishes.
On mine, the clearish part is a slightly-bendable hard plastic with the texture of what all of my matte hard plastic. Think the type of plastic that is one most power adapters (that aren't shiny) but add a slightly bendable aspect to it.
The black part on the back is shiny, slick, smooth, and more flexible. It's similar to silicon cases (what I can assume you mean by soft gel/rubber) but I think it's still different. It seems to be less "floppy" even though it is very bendable. The shiny black part seems to "stick" to certain surfaces (such as my desk and other hard/flat surfaces) but not to some that you would expect (it doesn't stick to my pockets at all and glides just fine across my clothing, car seat, and non-leather furniture - it might stick to leather, I don't know). The black part on the front appears to be the same material as the black part on the back, but with a matte finish. The result of the different finish is that it doesn't have the "stickiness" on much of any surface, yet still gives your hand a slight bit of grip beyond what the stock TBolt gives you.
Overall, the "feel in hand" is comfortable and it gives you extra grip but doesn't feel sticky or anything like that. Imagine going from a slick, hard-plastic phone to a phone with a rubberized body (like our TBolt has). Going from a naked TBolt to this case is kinda like taking that one step further. But in no way could I ever describe it as "feeling sticky" in my hand or pocket.
jblist90 said:
pretty cool looking, does it hold up?
Click to expand...
Click to collapse
So it looks like/feels like it's not going to just fall apart or anything like that, if that's what you mean. I can't envision drops/dings or other daily use wearing it down.
The ONE concern that I have about it holding up is because it is made with two types of "plastic" (I don't know if it's plastic, silicon, rubber, or whatever, hence my quotes). I fear that if I take the case off and on a lot (for my car dock), that the joints of the two plastics might start to come apart. This is NOT based on any quality issues that I have seen so far, just a concern based on the fact that this wasn't produced in a single mold when it was melted down (this is coming from somebody with an engineering background).
I will be shocked, though, if I have a problem with this case in the next 6 months, and for $5, well, I'd say that's pretty damned good!
boristhebladexx said:
is the inside rubber/silicon?
Click to expand...
Click to collapse
Read my post a couple posts up about the 2 different types of materials with 3 finishes. As best as I can tell, the inside is the same material as the outside. What this means is that 60% of it is the very flexible plastic while the clear part does cover ~40% of the back. I would expect the black part to offer more protection to a fall/bump than the clear part, and fortunately the black part covers most of the corners and edges. Still, I expect the clear part to offer more protection than a hard plastic case would.
Updated the OP with some photos. Perhaps they will help.
thanks for the detailed feedback!
This case will also fit into the Verizon holster/shell combo holster. You just can't use the VZW shell, but it'll slide into the holster. The fit is a little snug, but it works. I like to swap out this case with the VZW shell. This one provies more protection, but the VZW one is pretty cool too.
In case anybody was wondering, I got mine from this seller from China: http://goo.gl/62Fhx
It took something like 10 days to get to me, but I didn't mind since it cost less than a good burger.
Jaxidian said:
I just got my S-line case (black) from eBay and I love it. It adds very little bulk, seems like it will do a good job protecting my phone, and looks very nice.
Definitely worth the $5!
Edit: Pics added
Click to expand...
Click to collapse
Hey, thanks for the write up. I'm in Arizona and ordered one for $5 from a California seller. I should have it early next week.
Thanks again
Sent from my BAMF ADR6400L using XDA Premium App
I ordered mine just before the thread was started and its my favorite case for my Thunderbolt. It looks so cool too!
sent from my BAMF Thunderbolt!
Well Done
$5 ARE YOU KIDDING ME? grrr I have the silicone case that I got from VZW for $15 and it's not even all that..
But I think all cases will add some bulk for for that price you cant go wrong. Great buy.
Might have to check this one out
Just a heads up, with this casr the phone fits like a champ in the holster of the shell/holster combo i got from VZW
sent from my BAMF Thunderbolt!
Hello all,
I have bought a Casemate tough case and received it today and made a quick video on youtube about how it looks and feels on my channel.
In summary it is a fantastic case and the only drawback is the fact that it hand't been released earlier.
Here is the Youtube link
robifis said:
Hello all,
I have bought a Casemate tough case and received it today and made a quick video on youtube about how it looks and feels on my channel.
In summary it is a fantastic case and the only drawback is the fact that it hand't been released earlier.
Here is the Youtube link
Click to expand...
Click to collapse
How thick does it make the device now?
It's not actually that bad to be honest. It gives it a "nice and comfortable" feel
robifis said:
It's not actually that bad to be honest. It gives it a "nice and comfortable" feel
Click to expand...
Click to collapse
How about when you put it in your pocket? is it still comfortable in there? I use TPU cases right now, and they're fairly slim as they are. But I never feel comfortable with them if I were to drop my device. They're just good for scratches, not for falls (which never happens, but I'm sure it will happen sooner or later).
zkyevolved said:
How about when you put it in your pocket? is it still comfortable in there? I use TPU cases right now, and they're fairly slim as they are. But I never feel comfortable with them if I were to drop my device. They're just good for scratches, not for falls (which never happens, but I'm sure it will happen sooner or later).
Click to expand...
Click to collapse
It fits into my pocket alright a nice fit without making it look like i am "excited" . I am 6'2" however so my pockets might be slightly bigger. With this I literally have no worries about it dropping. I probably don't even need the screen protector on the device.
If you look on my youtube channel there is another case review up from casemate too and the phone does seem just as secure without the added bulk.
Will it fit an extended battery?
ubermetroid said:
Will it fit an extended battery?
Click to expand...
Click to collapse
Depends how big...a slight raise and you might just get away with it but an extended battery like a 4500mAh then no...This case is designed exactly for the normal battery with a tiny tiny bit of room if any
Nice lookin' case, shame it's only in black
nice case there, the only thing is it adds so much bulk to the note, that's my only concern with this case...
aditya_reds said:
nice case there, the only thing is it adds so much bulk to the note, that's my only concern with this case...
Click to expand...
Click to collapse
I see what you mean but I don't mind it as the phone is big already.
I just love the case because it is soooo comfortable to hold. I had it on my GS2 and I couldn't wait until casemate released it.
It would be worth trying it if you get the chance you won't regret it
robifis said:
I see what you mean but I don't mind it as the phone is big already.
I just love the case because it is soooo comfortable to hold. I had it on my GS2 and I couldn't wait until casemate released it.
It would be worth trying it if you get the chance you won't regret it
Click to expand...
Click to collapse
Sure mate, might buy it later i guess...
Its always good to have choices..
I have a TPU gel S-Line wave case on my Note right now.
I intend to buy the Case Mate Tough, but there are some things I want to ask you about.
How does it feel when you press the power / volume buttons? I mean... do you feel it, or it's like... erm... dang. The feedback, is it good or bad?
Also, how "slippery" is it on the top/bottom edges (where the polycarbonate shell isn't holding it as tight as on the sides)? Bad enough to "slip" off a bit when you take it out of a tight pocket, or even when you drop it...?
---------- Post added at 11:08 PM ---------- Previous post was at 10:57 PM ----------
Oh and one more thing (not likely to be the last )... Did you get a screen protector inside the package? The store where I'm about to buy it from claims there is one in the package, although they don't mention whether it's made by Case-Mate (do they actually do screen protectos?) or some other firm, or if it's clear or matte or whatever...
The feeling is really good I loved it. The button feedback is great. I buy tough cases for all my phones as I love how they feel. The buttons are easy to press and the phone stays clean without any dirt getting in between the phone and the case.
With regards to screen protector, no there wasn't one and I am not aware that casmate do do any screen protectors. I usually go for zagg ones as I like them the most.
robifis said:
The feeling is really good I loved it. The button feedback is great. I buy tough cases for all my phones as I love how they feel. The buttons are easy to press and the phone stays clean without any dirt getting in between the phone and the case.
With regards to screen protector, no there wasn't one and I am not aware that casmate do do any screen protectors. I usually go for zagg ones as I like them the most.
Click to expand...
Click to collapse
Thank you for the answer!
Then the store that is selling the case probably includes a crappy screen protector in themselves . Or CaseMate started to add this recently... who knows.
I'll buy it on wednesday. Hope I don't get one that has askew cut-outs and such, haha .
My case arrived just today!
It had a screen protector in the package... which was probably added by the shop, since the package was not sealed anymore and... oh well...
The screen protector was probably good, at least as good as those cheap ones you can get for a dollar a piece, but I f**ked up at installing it. I was planning to go down to a shop and buy a 3M Vikuiti screen protector (the vendor installed it, perfectly), anyway.
-----
The case is... well, it's bulky! It's really good, but installing it is a bit... well, it's hard. I did some drop tests with it, and the buttons were slightly off, also the lip... required some extensive pulling-with-teeth .
I'm dissapointed by the fact that they didn't add a few extra stripes of ABS on the top and bottom.... without those, those two sides are flimsy and easy to get off, you know... Anyway.
Also, the hard shell doesn't perfectly fit over the silicone glove, at least on the top side... but it's good enough.
For this kind of price, I was expecting utmost perfection, but it's good . To be honest, the S-Line wave TPU case I had before felt better in hand - also had better grip. Or perhaps I just need some time to adjust to this new case...
Also, hate how the silicone is a dust magnet.
-----
Anyway, this case is overall good. Definetly protects the phone well .
I used the case-mate tough case back when I had my Galaxy S and loved it! It offered outstanding protection from bumps and knocks so I purchased the case again for my Note. Used it for a few months but have since moved to the Mercury case. What made me change was the difficulty I had taking the phone out of my pockets. The textured surface of the case is nice to hold and feels good but it's too clingy to clothing, magnified by the size of the case's surface area ( probably why I never had the same problem with my Galaxy S). Still use it every now and again though.
diverblue said:
I used the case-mate tough case back when I had my Galaxy S and loved it! It offered outstanding protection from bumps and knocks so I purchased the case again for my Note. Used it for a few months but have since moved to the Mercury case. What made me change was the difficulty I had taking the phone out of my pockets. The textured surface of the case is nice to hold and feels good but it's too clingy to clothing, magnified by the size of the case's surface area ( probably why I never had the same problem with my Galaxy S). Still use it every now and again though.
Click to expand...
Click to collapse
The Mercury case seems to be a jelly case?
And it doesn't even cover the buttons...
Oh well. You should have bought the CUBZ S-Line wave TPU case instead, it's more good looking
I'm trying to decide between these two cases, and Ive heard good things about both of them, but I'm just wondering which you guys think would be better.
Update, links :laugh:
Incipio http://www.incipio.com/Samsung-Galaxy-S-III-Cases/Incipio-Samsung-Galaxy-S-III-SILICRYLIC-DualPro-Hard-Shell-Case-with-Silicone-Core.asp
Speck http://www.speckproducts.com/candyshell-for-samsung-galaxy-s3.html
gdaysoccer said:
I'm trying to decide between these two cases, and Ive heard good things about both of them, but I'm just wondering which you guys think would be better.
Can't post links because I'm still new, but they arent too hard to find.
Click to expand...
Click to collapse
My vote goes to Incipio.
The dual layer Incipio Silicrylic should provide more protection than Speck, and Speck's are getting a reputation for cracking. (Another reason that I'd never buy from Speck is because they send lawyer nastygrams to people reselling their cases on ebay!)
i went to the att store yesterday and the guy there pulled out TWO spec cases. on one i couldn't get the up on the volume rocker to work. on the second one it held that button down
my vote goes to the incipio dual pro but i'm prob gonna end up naked. the incipio adds more bulk to the phone than the speck AND dirt still gets in the incipio one. i'd like to try the case mate pop case. that'll prob be my last try.
alternatively, the official samsung cases that come in a two pack are awesome. i'm just looking for something to cover my buttons because it's very annoying that they're kinda loose. was expecting GNex quality in the button sturdiness area (extremely stiff/held into place).
zmore said:
My vote goes to Incipio.
The dual layer Incipio Silicrylic should provide more protection than Speck, and Speck's are getting a reputation for cracking. (Another reason that I'd never buy from Speck is because they send lawyer nastygrams to people reselling their cases on ebay!)
Click to expand...
Click to collapse
Had not heard about the cracking issue, so that is definitely something I'll keep in mind. And, I had heard about the reselling issue, which is quite sketchy in my opinion.
mrvirginia said:
i went to the att store yesterday and the guy there pulled out TWO spec cases. on one i couldn't get the up on the volume rocker to work. on the second one it held that button down
Click to expand...
Click to collapse
Also had not heard about the volume rocker issue... making me think that Incipio is definately more the way to go.
mrvirginia said:
my vote goes to the incipio dual pro but i'm prob gonna end up naked. the incipio adds more bulk to the phone than the speck AND dirt still gets in the incipio one. i'd like to try the case mate pop case.
Click to expand...
Click to collapse
I would rather go naked but Im just worried about all the problems Ive heard with people dropping them and such (not that I plan on dropping it :silly
gdaysoccer said:
I would rather go naked but Im just worried about all the problems Ive heard with people dropping them and such (not that I plan on dropping it :silly
Click to expand...
Click to collapse
yeah i was naked for over 6mon with my GNex. still haven't dropped that one... lol
i don't drop phones. the S3 is very thin, though, and i feel i need to put something on it at least. i'll prob go back by and pick up a pop case just to give it a try. if all fails, samsung oem case it is for me prob.
Casemate Pop! beats both in this case IMO. It has the look of a Speck Candyshell (which are usually my favorite), plus kickstand, plus rubber grippage on the sides. The buttons are very tactile. And of course the case extends above the screen so dropping it on the screen won't break it. It fits even the largest headphone jacks (looking at you, big monitor-headphone people) and has a big space for large aftermarket USB chargers.
The silicrylic is very nice it is what I have on mine. I had the unsteady buttons and the silicrylic covers them perfectly and makes them feel extremely solid and stable and takes just the right amount of pressure imo to push them. I have the white s3 and the light / dark gray case it looks very good. I have had a lot of people say they really like my case. It also makes the phone very easy to hold onto compared to no case and seems like it provides good protection.
I've owned both and honestly, the speck is junk. If I were you, I'd order both and see for your self, then send back the speck.
FYI, I found on another thread where you can put a piece of paper or scotch tape inside the case above the volume rocker and it fixes that. I was upset when I ran into that problem on mine but it works well now. Easy fix on that particular issue.
I have the speck case only because it goes well with the MoshI ivisor. It looks good but has only been in my pocket with nothing else and looks rubbed and scratched on the back. Does feel like it could crack easily. I won't take my phone into work until I find a otterbox, which I will more than likely remove the built in screen protector.
Sent from my SCH-I535 using Tapatalk 2