Related
I know the Car Dock comes with an insert for the phone if you do, or don't have a case on it. Confirmed today that the laptop dock does too. I assume that all the docks have this, but haven't seen an entertainment dock or standard dock. If anyone can confirm with pics, it would be greatly appreciated. Here's the laptop dock one in pics attached to this post.
link12245 said:
I know the Car Dock comes with an insert for the phone if you do, or don't have a case on it. Confirmed today that the laptop dock does too. I assume that all the docks have this, but haven't seen an entertainment dock or standard dock. If anyone can confirm with pics, it would be greatly appreciated. Here's the laptop dock one in pics attached to this post.
Click to expand...
Click to collapse
I don't have pics but the Multimedia dock and Standard dock are the same way
I've got the MM dock and the car dock, and have played with the charging and LT docks in store. All have the little panel that pops out. The speck sorta works with the MM, charging, and LT docks, but not at all with the car dock. I now have the feather, which works with all 4.
I have the BodyGlove case from AT&T, and it works great on the laptop and car dock.
Son of a mother f*cking b*tch!!!!!! I already sent back my standard dock!!!!!!!!!
I have a Otterbox Commuter case, do you think that it would fit with the insert removed? The micro plug was really close to getting there, just couldn't make it work.
I know that even with my thin Body Glove case, the phone wouldn't even think of fitting in the laptop, but with the insert out, fits with ease. Could work fine, but I haven't dealt with the Commuter case yet.
link12245 said:
I know that even with my thin Body Glove case, the phone wouldn't even think of fitting in the laptop, but with the insert out, fits with ease. Could work fine, but I haven't dealt with the Commuter case yet.
Click to expand...
Click to collapse
*hitting head on desk*
I hate you... thanks for the info. guess I might re-order and give it a try.
*light bulb above head*
Wait a minute... I'll run down to the local AT&T store, they always have the Atrix in the Multimedia dock (same dimensions as the standard dock). I'll pop out the insert there and see if my case will fit.
Swiftks said:
*hitting head on desk*
I hate you... thanks for the info. guess I might re-order and give it a try.
*light bulb above head*
Wait a minute... I'll run down to the local AT&T store, they always have the Atrix in the Multimedia dock (same dimensions as the standard dock). I'll pop out the insert there and see if my case will fit.
Click to expand...
Click to collapse
Yep, my store didn't get the multimedia dock, just the laptop dock. We haven't recieved the otterbox defender in either, only seen them online. Best of luck, let us know what you find.
Well, no dice with the otterbox commuter case... I went to the local AT&T store, took the insert out of the standard dock, and the micro adapter still wouldn't reach. You should have seen the look on the dumb ass sales persons face... haha priceless.
I'm also assuming the otterbox defender case will not work either, as it is larger than the commuter case. Thanks anyway, still good info. to know.
Well I hope I'm not a thread-killer as I posted this several days ago in another thread and never had any comments on it...
I searched around on many forums but found no discussions about the "larger case" insert documented in the manual, at least for the Multimedia dock.
It's listed in the manual as part number SJYN0722A. The manual indicates that it is included when purchasing the dock and is for use with a "ruggedized" case. This is also referenced at Motorola's FAQ on accessories for use with a "2 shot battery door fit plate", whatever that is/was.
The insert that is being removed is part number SJYN0723A.
Anyone have this 22A insert or know anything about it? Was it discontinued before the docks were even released?
I have the Incipio Feather case and have removed the insert as discussed to use it in the Multimedia dock. It works, but does not physically support the phone at all as others have mentioned.
Thanks!
flexpackman said:
Well I hope I'm not a thread-killer as I posted this several days ago in another thread and never had any comments on it...
I searched around on many forums but found no discussions about the "larger case" insert documented in the manual, at least for the Multimedia dock.
It's listed in the manual as part number SJYN0722A. The manual indicates that it is included when purchasing the dock and is for use with a "ruggedized" case. This is also referenced at Motorola's FAQ on accessories for use with a "2 shot battery door fit plate", whatever that is/was.
The insert that is being removed is part number SJYN0723A.
Anyone have this 22A insert or know anything about it? Was it discontinued before the docks were even released?
I have the Incipio Feather case and have removed the insert as discussed to use it in the Multimedia dock. It works, but does not physically support the phone at all as others have mentioned.
Thanks!
Click to expand...
Click to collapse
Not killing the thread at all, more info is always welcome. I would assume that the other part number is just the dock connector with no insert on it.
Sorry to double post if you already put this up, hadn't seen anything and it was cool to find out.
Thanks link12245
The manual specifically speaks to two inserts. One for just the phone and one for "over-sized" cases.
I guess that it never made it to production and Motorola didn't change the manuals....
motorola forgot to add the plate
i spoke to motorola support @ 800-734-5870, they acknowledged that the plate (part #: SJYN0722A) should have been included. they will refund the full amount for the dock & advised me to repurchase it online. the newer docks now includes this part.
atrixhack said:
i spoke to Motorola support @ 800-734-5870, they acknowledged that the plate (part #: SJYN0722A) should have been included. they will refund the full amount for the dock & advised me to repurchase it on-line. the newer docks now includes this part.
Click to expand...
Click to collapse
Thanks!
I was going to call support, but thought I would ask around first.
I purchased this from Amazon and got it last week. I'll see if they have new stock for a return and/or give Motorola a call to see if I can find out who has fresh stock that has the insert.
http://www.proclipusa.com/default.a...d=&parent_category=4&d_pcat=13451&d_cat=18854
I like these mounts, the page just went up today. It's much better than the crap Verizon is pushing. Anyone else ever use these docks?
I can't tell from the pics but does the one that have the charger block the audio out?
Never mind, I can see the audio jack now in the pics.
i came on to post this...I just got an email from proclip confirming this. Ive used proclip in the past and they are of good quality
http://www.proclipusa.com/default.a...d=&parent_category=4&d_pcat=13451&d_cat=18854
I'm guessing only the adjustable holder will fit our phones if we have cases on them?
bowsersoulstar said:
I'm guessing only the adjustable holder will fit our phones if we have cases on them?
Click to expand...
Click to collapse
Looks like it. I would like the active setup, but I will have a TPU case on it. I wonder if a heat gun can help me bend it out a bit.
Roroco said:
Looks like it. I would like the active setup, but I will have a TPU case on it. I wonder if a heat gun can help me bend it out a bit.
Click to expand...
Click to collapse
I'm looking at the same problem here. I've been using a holder with the 2 amp charger for the past two years with my Incredible and absolutely love it. I've never been able to get an extended battery because of how tight it slides in, though. I'll email them and ask but I might have to just swap in the stock battery for rides I know I'll need the juice.
Pros of using this are great, though. Because it's 2 amp charger I would get ~25% in about 20 minutes of driving with my Incredible with fast charging enabled in the kernel. GPS and Bluetooth for Google Maps would slow the charge down but would still give me a full charge from 20% to full in an hour. With Cyanogen I would set my bluetooth to only turn on when connected to a wall charger so I'd slide this in and my buetooth would turn on and connect to my car automatically. Last but not least, your wires are all tucked away! Very clean look.
Does the mount hold the audio cable so it doesn't move and it plugs into the phone?
Any issues with the diztronic TPU case? Would it prevent the microusb or audio plugs from inserting into the phone completely?
nomisunrider said:
Does the mount hold the audio cable so it doesn't move and it plugs into the phone?
Any issues with the diztronic TPU case? Would it prevent the microusb or audio plugs from inserting into the phone completely?
Click to expand...
Click to collapse
If you get the universal dock, the bottom of the phone is completely exposed so you won't have any issues. I got my wife one of these (universal) for her iPod a few years back and the build quality is top notch.
i wish I didn't have to also plug in the cables separately, but maybe I can jerryrig something up.
Roroco said:
If you get the universal dock, the bottom of the phone is completely exposed so you won't have any issues. I got my wife one of these (universal) for her iPod a few years back and the build quality is top notch.
i wish I didn't have to also plug in the cables separately, but maybe I can jerryrig something up.
Click to expand...
Click to collapse
Yah, that's I'm trying to avoid. Taking off my case every time I get in the car would be a big hassle.
nomisunrider said:
Yah, that's I'm trying to avoid. Taking off my case every time I get in the car would be a big hassle.
Click to expand...
Click to collapse
If you don't want to remove the case, then you need to get the universal dock. I wish them made a version of the active dock that was slightly adjustable, but they don't.
My question is would the charging holder accommodate the extended battery given that it barely adds any thickness to the device. From the looks of the pictures, it looks like the device slides in and is held on to the sides only so it looks like shouldn't be a problem.
I contacted customer service and they said this:
Indeed the added battery won't make it work in 512324. Our adjustable holder listed with the Galaxy Nexus listing might work. Our custom holders are made for the device as it comes out of the box, and indeed any added thickness will make it not work in our custom holders.
Click to expand...
Click to collapse
So I guess not?
Roroco said:
If you don't want to remove the case, then you need to get the universal dock. I wish them made a version of the active dock that was slightly adjustable, but they don't.
Click to expand...
Click to collapse
Which I don't want. I want one with the charger, that can accomodate a case.
They make such a thing for the iphone. My co-worker has one.
http://www.proclipusa.com/brodit-de...and-pass-through-connector--516165-18357.aspx
I emailed them asking if they have plans for such a device for the galaxy nexus.
Mooem7 said:
My question is would the charging holder accommodate the extended battery given that it barely adds any thickness to the device. From the looks of the pictures, it looks like the device slides in and is held on to the sides only so it looks like shouldn't be a problem.
I contacted customer service and they said this:
So I guess not?
Click to expand...
Click to collapse
Most extended batteries tend to add a lot of bulk (more than cases sometimes). The person who emailed you back may not be aware that the GN's extended battery adds about 1-2 mm of bulk to the bottom half of the phone.
Since the holder is a slide-in type, I can't see this being 'millimeter-tight'. Don't take my word for it but I'm willing to bet that this will fit even with the extended battery on.
I guess we won't know for sure until someone gets the fitted holders and try it though. I'd try, but I've a case so the fitted ones do me no good for sure.
nomisunrider said:
Which I don't want. I want one with the charger, that can accomodate a case.
They make such a thing for the iphone. My co-worker has one.
I emailed them asking if they have plans for such a device for the galaxy nexus.
Click to expand...
Click to collapse
80 bucks for that dock. Ouch. Good concept, but that is a bit rich.
I wish you could buy these at a store. I've already got the whole set for the Nexus One and I've been waiting for the GN mount. I just added to my cart and it's an extra $20 in shipping (to Toronto). So after duty at the border I'm looking easy at $60 just for that one piece of molded plastic. Yeah the mount is great, but that's seriously expensive.
I've used their cases for the last 2 years, nexus s and thunderbolt, and they are great. I still have my Nexus S holder and the picture of the one on their site for the GNex looks like the same style, if so it should work with the extended battery. The slide in case is tight on the sides but leaves a gap behind the phone, see attached pic. The phone slides into that groove and the groove itself is very thin so it doesn't appear it will interfere with the rear battery cover at all.
Proclips is a great solution. I've used it for my car for years. I used them in 3 different cars. Pricey however, it works very well. A+
Got a negative response =(
Unfortunately not. We only have adjustable holder with charging for our Apple line. These have all the same connectors in exact the same location.
For other phones there are too many differences in charging location and thickness of cases.
Best Regards,
Customer Service
ProClip USA, Inc.
nomisunrider said:
Which I don't want. I want one with the charger, that can accomodate a case.
They make such a thing for the iphone. My co-worker has one.
http://www.proclipusa.com/brodit-de...and-pass-through-connector--516165-18357.aspx
I emailed them asking if they have plans for such a device for the galaxy nexus.
Click to expand...
Click to collapse
Hi
For those in the UK... just ordered an active mount from http://www.mountonus.com/
£59.99... bit steep but I guess thats the price you pay for a nice phone-specific/car-specific mount!
nomisunrider said:
Got a negative response =(
Unfortunately not. We only have adjustable holder with charging for our Apple line. These have all the same connectors in exact the same location.
For other phones there are too many differences in charging location and thickness of cases.
Best Regards,
Customer Service
ProClip USA, Inc.
Click to expand...
Click to collapse
It was to be expected. They are not going to design a niche product for a phone until it sells consistently in the millions. That said... Creating a Micro USB small swing arm to make it universal should be too hard....
If I feel industrial, I might see what I can make on my own.
I'd prefer something windshield mounted. If I'm not getting the 3-pin version, I don't see why I should have to remove my case for the car dock, so I'd like one of those generic car mounts.
I have no experience with them though. What's the best one? Any recommendations?
check out Ram Mounts. google it
They are the most sturdy, but can be expensive.
i use the X mount one with my gnex and its awesome.
FYI I saw someone mention using the standard Garmin nuvi suction cup mount, with a GN in a case it does seem to fit.
Sent from my Galaxy Nexus using XDA App
i have the european dock (3 pins present) and very firm. Little tight but other than that holds it very well
Javillanueva67 said:
i have the european dock (3 pins present) and very firm. Little tight but other than that holds it very well
Click to expand...
Click to collapse
This thread is about the verizon nexus. You say you have the european samsung dock with the pogo pins and the verizon phone fits in it?
If so, do the pins line up and work to put in in car mode?
I ordered the VZW/LTE specific version of the car dock from mycellworld.com. its supposedly legit in that it has the 3 pins and is definitely for the LTE handset. its on back order, supposed to ship next week. will review as soon as it shows up.
Sent from my Galaxy Nexus using Tapatalk
p.s. I have the extended OEM battery and I also have the generic car dock (no 3 pins) and it fits no problem.
Sent from my Galaxy Nexus using Tapatalk
I know you said you prefer windshield mounted but I just bought the Tetrax FIXWAY mount and I love it. There is a large thread on it with lots of pics/videos. That thread is one of the reasons I bought it.
I too was looking for a car mount to be used with a case and an extended battery. I was just going to use a generic one off of amazon that was like a clamp style. Even though the Tetrax doesn't suction cup to the windshield, I think it is worth you looking at if you haven't already.
I mounted mine onto my dash and think it works perfectly. It doesn't obstruct my view at all and its is just a quick glance down to check navigation/music.
The phone is really quick to just 'snap' it in place. The only downside to me is that you have to manually plug in the power and aux cords but I don't even see this as a true downside since you will have to do this with any generic mount you would need in order to keep the case on.
If you are interested and would like me to take any additional pictures for you just let me know and I would be happy to do what I can
ProClip adjustable width mount is what I'd recommend
bpowder1966 said:
check out Ram Mounts. google it
They are the most sturdy, but can be expensive.
i use the X mount one with my gnex and its awesome.
Click to expand...
Click to collapse
I ordered the X-grip mount with a medium size arm and the adhesive rubber ball base(I plan on keeping my car until its run into the ground) on January 11th.
Soon after ordering they informed me that the base wasn't in stock but it would ship out in 1-2 weeks. 2 weeks past with no word, then he said it would ship out at the end of the week. Still no shipping
I figured CS people would know not to give unrealistic ETA dates(especially when ram-mount makes the damn things themselves), especially over and over again, stringing the customer along...
rickt said:
I ordered the VZW/LTE specific version of the car dock from mycellworld.com. its supposedly legit in that it has the 3 pins and is definitely for the LTE handset. its on back order, supposed to ship next week. will review as soon as it shows up.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Let us know when you get it because I read a lot on the thread about the 3-pin that some people got burned by claims of the docks having 3 pin connection when they actually didn't. Keep us updated!
bpowder1966 said:
check out Ram Mounts. google it
They are the most sturdy, but can be expensive.
i use the X mount one with my gnex and its awesome.
Click to expand...
Click to collapse
Can it swivel to horizontal mode? Currently, this one seems to be the best.
jcwarren217 said:
I know you said you prefer windshield mounted but I just bought the Tetrax FIXWAY mount and I love it. There is a large thread on it with lots of pics/videos. That thread is one of the reasons I bought it.
I too was looking for a car mount to be used with a case and an extended battery. I was just going to use a generic one off of amazon that was like a clamp style. Even though the Tetrax doesn't suction cup to the windshield, I think it is worth you looking at if you haven't already.
I mounted mine onto my dash and think it works perfectly. It doesn't obstruct my view at all and its is just a quick glance down to check navigation/music.
The phone is really quick to just 'snap' it in place. The only downside to me is that you have to manually plug in the power and aux cords but I don't even see this as a true downside since you will have to do this with any generic mount you would need in order to keep the case on.
If you are interested and would like me to take any additional pictures for you just let me know and I would be happy to do what I can
Click to expand...
Click to collapse
I'm really tempted. Both options above are expensive. I was worried that the attachment thing might look like ****, but from the pictures in that thread, it doesn't look too bad. Same question though, can I turn it to landscape for Navigation? Also, how sturdy is the connection? Will it fall off as my car hits a bump or something?
acr89 said:
ProClip adjustable width mount is what I'd recommend
Click to expand...
Click to collapse
+1 to ProClip! They have a mount that can adjust with different cases, and it's very sturdy. The one I have mounts to my vent though (I prefer this anyway since my windshield is so...sloped). They are kinda pricey also, but they don't look too bulky and are specifically made for your car model. I love mine.
Would like to bump this thread to see if anyone else had suggestions for good universal car mounts/docks that will work with a GNEX in a case.
Samcobra said:
I'd prefer something windshield mounted. If I'm not getting the 3-pin version, I don't see why I should have to remove my case for the car dock, so I'd like one of those generic car mounts.
I have no experience with them though. What's the best one? Any recommendations?
Click to expand...
Click to collapse
try the iBolt pro dock alumina... this car dock works with just about any phone, and especially works great with the galaxy nexus.... this cardock allows you to place it on either the windshield, dashboard, or air vent since extra pins are supplied to place the dock there and theres no need to remove your case from your phone... which is a god send.. it only cost me about $35 on amazon, so i cant argue with the price... i have excellent photos of it, that i'll share as soon as i reach the 10 post mark, that allows me to attach files and externals link...
SNNTEC said:
i have excellent photos of it, that i'll share as soon as i reach the 10 post mark, that allows me to attach files and externals link...
Click to expand...
Click to collapse
You're past 10 posts, pics please!
http://www.expansys.com/htc-one-x-d...tm_medium=shopping&utm_campaign=base&ito=1701
Considering getting one of these when they are released... I just wanted to ask if anyone has read about the wattage? If it works as a decent speaker I'd be more than tempted. If it's a measley 2.5W pile of nothing I might not bother...
i dont think the speaker will be anything good, more about just puttng the phone on a dock, but i do think its overpriced for what it is, but i love the idea of it.
I just think perhaps the wattage could be the decider... if it's good it'll be reasonable value. I suspect it might not be though
I think its more "gentle" to put the phone on a cradle like this then fiddle in the plug every night isnt it?!
Be warned that if you want to use a case on the phone and still dock it, the ONLY hard case that seems to let the "pins" of the dock reach the back of the phone is the HTC HC C704 which stupidly doesn't have a clear version like the HTC HC C700. The C700 is missing the holes!! Very odd design choice by HTC
Poor thing! And the c704 don`t seems to protect the ring around the lense of the cam.
You can't protect the ring on the camera with the docking cases because the dock has a groove that holds the camera, and the extra protection would make it sit in the dock less securely(because it can't sit flush to the dock). I believe that is why they differentiated the cases.
jonstatt said:
Be warned that if you want to use a case on the phone and still dock it, the ONLY hard case that seems to let the "pins" of the dock reach the back of the phone is the HTC HC C704 which stupidly doesn't have a clear version like the HTC HC C700. The C700 is missing the holes!! Very odd design choice by HTC
Click to expand...
Click to collapse
But there is a white and a grey version to match each colour of the phone.
For me, the dock is tempting for work to keep it charged and sync my outlook calendar.
Is anybody interested in cheaper version with only pogo-pin charging? It seems that pogo connectors are availiable from chinese producers, we just need to design the case and electronics I would throw in my 20 Euro for a good designed product.
Let me know if you are interested in kickstarted project.
chortya said:
Is anybody interested in cheaper version with only pogo-pin charging? It seems that pogo connectors are availiable from chinese producers, we just need to design the case and electronics I would throw in my 20 Euro for a good designed product.
Let me know if you are interested in kickstarted project.
Click to expand...
Click to collapse
I'm interested. I only want charging really, not bothered about a crappy speaker
Si
love the idea!
make it a clean design, and my money is yours
maybe a hdmi connector too? <- would pay more for that maybe as special version?
The main thing putting me off about this dock is the angle at which the device will sit, as far as I'm concerned it's far too shallow.
I agree with my Rotherham friend. I'm not interested in it doing anything fancy then
Charge the device
Make it enter dock mode
Look pretty
Si
I like it, I might get one for work, so I can clearly see my phone screen when I'm at work.
I'm guessing if the phones in the cradle then Sense 4.0 will go landscape?
I would buy a cheap dock for charging.... hdmi sounds good but I guess the cost will slowly creep up....
BigladUK said:
I'm interested. I only want charging really, not bothered about a crappy speaker
Si
Click to expand...
Click to collapse
Theres someone selling a desktop charger in ebay UK
vanngoh said:
Theres someone selling a desktop charger in ebay UK
Click to expand...
Click to collapse
Can you link to it ?
Si
a link please ..?
All docks that are available now use micro USB not the pogo pins! I thought about starting a project but I'm lacking electronics skills... A friend of mine can model the product in CAD and I could find a way to print a prototype in 3D but first pogo pin charging needs to be reverse engineered and tested. I think HTC may have added some kind of accessory verification...
Is there anyone who've bought this cradle already?? The want to buy one, if the connection between the dock and telephone is good. So if there is anyone who've bought it could you give a review??
Sent from my HTC One X using XDA
Hi All,
I have been looking at a few reviews of owners and their trials and errors
I would like to ask from those who have tried various docks and clip on chargers for the Z3 compact,
which of these would you recommend.
I am using a flap case with mine and don't want to end up purchasing something that totally doesn't fit
or completely useless in its ability to charge properly.
Could you give me some tips, ideas and feedback please??? Even if just listing names I don't mind
doing the search myself on the items.
Thanks!:good:
i've been using the Magnector since November, when i got the phone.
http://www.amazon.com/Magnector-Performance-Xperia-Charging-Cable/dp/B00JEMESHG
zero issues. i chose the cable over any docks because i wanted some flexibility in case i needed to charge in my car, or while travelling; and i also wanted to be able to use it while it was charging.
I'm using the Deff microusb adapter and am very happy with it.
I have it pictured with my Rinke Fusion clear case here.
http://forum.xda-developers.com/showpost.php?p=58136303&postcount=21
I got it elsewhere, but it's available on Amazon.
http://www.amazon.com/Original-Pack...rds=deff&pebp=1421284468288&peasin=B00KNLFS9E
I am using the original Sony DK48.
Battery life is OK and i can make small charges easier with it. But the device is a bit overpriced thought.