Hi, im just about to flash leedroids 2.2.3 rom, which can oc to 1.8 ghz with setcpu, just wondering if there are any dangers in having it at this speed? anything to be aware of ?
It might fry your device, it might not, you never know. There's no need to run it at 1,8ghz. I'd recommend max 1,2ghz for daily use though everything runs smoot at 1ghz already.
If you overclock to 1.8Ghz you will increase the risks to fry your CPU(and hence, your device will be destroyed). Lol.
Also overclocking too high can drain your battery real fast. As per Hawks556, max 1.2Ghz would be fine.(perhaps it is almost to optimal)
I overclock mine at 1.16Ghz and it is already very smooth in LeeDrOid.
You may sometimes wish to overclock it until 1.8GHz is just to show off to your peers only. Maybe through quadrants. But later on make sure you underclock it back.
Cheers. =)
thanks for the help, lol whole thing just froze while i was reading it better underclock it lol : /
OC up to 1.5ghz should not harm your device.
Take a look at ths HTC Flyer: it has the same CPU as the DHD but it's set to 1.5ghz by default.
So there is no risk in overclocking up to 1.5ghz in my opinion.
Tapatalked with Tapatalk from my Desire HD using Tapatalk.
Hi there!
My phone is desire hd(arhd 5.1.11), right now I am thinking to set it on 1450(buzz oc+ kernel) with 1225mV vdd. As we all know that will lead to much more heat, and while my phone has battery temp sensor, it lacks processor one. For 24/7 is it appropriate to set it on that freq/voltage? I am sure there are people with far more experience than me on overclocking that phone, and I will be thankful if they want to share they opinions/exp .
Cheers!
Yes, it is safe because your phone doesn't run on 1.5ghz the whole day. If the min frequrncy is set to a lower value than 1.5ghz your phone will UC itself down to that value.
Furthermore, the HTC Flyer has the same cpu as our DHD and it runs at 1.5ghz on stock.
Sent from my HTC Desire HD using Tapatalk
True, I just worried because of flyer more space to cool down the cpu. Tho, I read that Qualcomm deliver MSM8255 Snapdragon on 1.4GHz frequency, then the buyer decide what freq to set. Now I am on 1.46GHz(1225mV), I think it's the sweet spot, because for 1.5-1.55 voltage goes like hell up . Thanks for your answer.
If i overclock but only when need more perform power whats the adverge life i ll get out my phone?
First of all how much do you want to overclock: 1,1-2,0 ghz ?
If you overclock to 2 ghz ( if you're phone is stable ) you will be sure you get a huge drain in lifetime. I have my phone overclocked to 1.4 ghz as I think this frequency doesn't harm your phone.
Second is not all the cpu's are the same, for me every frequency is stable, but maybe youre phone is only stable up to 1,4 ghz ( for example ). So keep that in mind.
The fact is you can't exactly say how long youre phone will last at what frequency as every phone's cpu is different. But I suggest, don't go over 1,5-1,6 ghz as you won't get any noticeable performance boost after that and at higher frequencies it does harm your phone.
So make a profile in "setxperia" and call it power or something you like, set it to 1,4 ghz max and threshold to 99 governor ondemand. This works the best for me, and if you don't need the power ( not gaming ) then switch it back to your normal profile i.e default.
Can someone tell me where I can find over-clock able kernel for my international One X? And what is the biggest clock speed on ONE X?
At present faux kernel can oc depending on what variant CPU you have but max at 1.6ghz
I have a v2 and can do 1.55 quad fine
Sent from my HTC One X using xda app-developers app
Eternity Project has an OC version up to 1.7GHz single core and 1.6GHz quad core
ZeroInfinity said:
Eternity Project has an OC version up to 1.7GHz single core and 1.6GHz quad core
Click to expand...
Click to collapse
Can you post link?
stefan063 said:
Can you post link?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1640532
Be careful of OC, always remember, not all chips are made equal
About last Repacked Eternity Project for ARHD 9.x.x
Hello,
I try the Last repacked eternity project kernel for ARHD 9.x.x the Kernel: 3.4 v0.38 (Overclocked) at :
http://forum.xda-developers.com/showthread.php?t=1654982
But the module file was repacked for CMW ROM.
Who find good repacked module corresponding to this kernel ?
Thank you for jour help.
Underclock
As this thread is about setting CPU speeds, can somebody help me with my problem as no one is responding?
Its about underclocking..
http://forum.xda-developers.com/showthread.php?t=1868011
Thanks in advance!
how does the OC work? i mean then running all our core it is limited to 1.2 ghz and is 1.5 on a single core.
does that men all cores run at the OC value or just the single core?
Sent from my Transformer TF101 using xda app-developers app
I suggest you flash faux's kernel.
It can oc to 1.6GHZ for most user~
and it support s2W!
I expect many users will be aware of this information, but just in case you aren't.
Anyone overclocking should be aware that this will usually lead to higher power consumption which leads to more heat produced and lower battery life.
Especially if it is necessary to overvolt to acheive higher clock frequencies with stability.
Power consumption is proportional to Voltage squared, so small increases in core coltage can result in larger increases in power consumption than mught be thought.
Needless to say this can have negative impacts on battery discharge time and overall life (due to higher temperatures).
Plus there may be some throttling back of frequency if high temperatures are reached. Also possible that frequency may be reduced to 1Ghz maximum when battery voltage is low (i.e when discharged)
Hope this is helpful (first post here)
paul_59 said:
I expect many users will be aware of this information, but just in case you aren't.
Anyone overclocking should be aware that this will usually lead to higher power consumption which leads to more heat produced and lower battery life.
Especially if it is necessary to overvolt to acheive higher clock frequencies with stability.
Power consumption is proportional to Voltage squared, so small increases in core coltage can result in larger increases in power consumption than mught be thought.
Needless to say this can have negative impacts on battery discharge time and overall life (due to higher temperatures).
Plus there may be some throttling back of frequency if high temperatures are reached. Also possible that frequency may be reduced to 1Ghz maximum when battery voltage is low (i.e when discharged)
Hope this is helpful (first post here)
Click to expand...
Click to collapse
CPU throttle starts at 85c with thermal TJ-max of 99c.
also there is many debates about this, higher speed need more power which drains battery, but that said it means work gets faster meaning it can idle faster saving power, same the other side slower speeds save power but take longer to get work done using more power.
Sent from my Transformer TF101 using xda app-developers app
stefan063 said:
Can someone tell me where I can find over-clock able kernel for my international One X? And what is the biggest clock speed on ONE X?
Click to expand...
Click to collapse
Go to Faux123 and read the opening post
http://forum.xda-developers.com/showthread.php?t=1647993
it will teach you about Tegra 3 variants.
Flash Faux123 latest kernel to know what variant you have.
You can have 1.5ghz quadcore minimum, except if you have the poor variant0 of the Tegra 3, and 1.6ghz quadcore max if you have variant 3
So the overclocking you can achieve depends on your Tegra 3 variant, whatever the kernel, don't trust the figures in kernel threads titles, they just give the max if you have variant 3. And the majority of people have variant 1 so limited to 1.5ghz quadcore and there's nothing to do about it, no future kernel can change the way your CPU was manufactured.
Just, SetCPU can display 1.6ghz or more, but if you have variant 0 or 1 it will never use it (CPUspy will say 1550 and 1600 are unused frequencies)
Variant 1 can go upt to 1550mhz but not for quadcore, so who cares....! Same for kernels claiming up to 1.7ghz, it's in single/dual core, so once more, who cares?
What is important is what max speed you can achieve in quadcore, nothing else, and the limits are clearly defined by your Tegra3 variant
"all chips are not created equal" was a silly bull**** invented more than one year ago as an easy answer to noobs claiming they couldn't overclock their dual core at their max. Now, on the One-X and because of Nvidia unstable quality"all chips are not created equal" is sadly the truth.
PS: wrong=> to say that overclocking means more voltage, undervolting a custom kernel a little can surprisingly reduce heat when you push your CPU to its max,I can have both 1500mhz quadcore and less voltage than stock, as well as less heat (I was surprised, really, on the Sensation I had always found undervolting kinda useless)
PPS: true=> thermal throttle will always come pretty soon and reduce your max speed......
i900frenchaddict said:
Go to Faux123 and read the opening post
http://forum.xda-developers.com/showthread.php?t=1647993
it will teach you about Tegra 3 variants.
Flash Faux123 latest kernel to know what variant you have.
You can have 1.5ghz quadcore minimum, except if you have the poor variant0 of the Tegra 3, and 1.6ghz quadcore max if you have variant 3
So the overclocking you can achieve depends on your Tegra 3 variant, whatever the kernel, don't trust the figures in kernel threads titles, they just give the max if you have variant 3. And the majority of people have variant 1 so limited to 1.5ghz quadcore and there's nothing to do about it, no future kernel can change the way your CPU was manufactured.
Just, SetCPU can display 1.6ghz or more, but if you have variant 0 or 1 it will never use it (CPUspy will say 1550 and 1600 are unused frequencies)
Variant 1 can go upt to 1550mhz but not for quadcore, so who cares....! Same for kernels claiming up to 1.7ghz, it's in single/dual core, so once more, who cares?
What is important is what max speed you can achieve in quadcore, nothing else, and the limits are clearly defined by your Tegra3 variant
"all chips are not created equal" was a silly bull**** invented more than one year ago as an easy answer to noobs claiming they couldn't overclock their dual core at their max. Now, on the One-X and because of Nvidia unstable quality"all chips are not created equal" is sadly the truth.
PS: wrong=> to say that overclocking means more voltage, undervolting a custom kernel a little can surprisingly reduce heat when you push your CPU to its max,I can have both 1500mhz quadcore and less voltage than stock, as well as less heat (I was surprised, really, on the Sensation I had always found undervolting kinda useless)
PPS: true=> thermal throttle will always come pretty soon and reduce your max speed......
Click to expand...
Click to collapse
Nice words and I just won't to add variant 1 can now go to 1.55ghz with faux 07vf I'm currently usein with the lowest most stable undervolt values and less heat than stock kernel and gameplay is amazing also on arhd 9.4
Sent from my HTC One X using xda premium
treebill said:
CPU throttle starts at 85c with thermal TJ-max of 99c.
also there is many debates about this, higher speed need more power which drains battery, but that said it means work gets faster meaning it can idle faster saving power, same the other side slower speeds save power but take longer to get work done using more power.
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
Your argument makes sense, but unless the governor is very efficient at controlling the CPU speed very quickly, in most cases your argument doesn’t hold true. For example when playing a game or running a CPU intensive application (where overclocking has any use) the processor works at full speed for the duration of the application.
EDIT: Frankly I don’t see any point in overclocking a phone like One X. I don’t play many games, but the few games I have played ran very smoothly. And if people are overclocking because of the (barely noticeable) laggy UI then overclocking is not a real fix anyway. Installing a custom ROM (perhaps JB), a different launcher, tweaking background apps/services are some of the more sensible and effective things to do instead.
No disrespect to the devs who are working on overclocking, but IMO HTC and nVidia must have spent a considerable amount of time and effort designing the CPU and deciding the optimal operational parameters to maximize performance while minimizing battery drain. Therefore anything out of those parameters (in theory at least) should impact either stability, or battery life. Perhaps the values HTC has decided are not the maximum possible values , because I assume they would have designed the phone to handle few exceptional conditions (i.e: extremely hot weathers). But I think over clocking would probably cause more problems in the long run than whatever the little gains you experience in short term. Just my 2c.
joewong1991 said:
Nice words and I just won't to add variant 1 can now go to 1.55ghz with faux 07vf I'm currently usein with the lowest most stable undervolt values and less heat than stock kernel and gameplay is amazing also on arhd 9.4
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Late reply, I hope you'll read it anyway
I tried faux 007b5, so overclock free too, I had 1.55ghz indeed, but never for quadcore, just for single or dual. Sadly I wasn't able to reach 1.5ghz quadcore but 1.4
With 007u, I have 1.5ghz quadcore, but 1.55 is an unused frequency
Can you check, with tegrastats, if you reach 1.55ghz quadcore or only for 1,2 (or3??) cores?
i900frenchaddict said:
Late reply, I hope you'll read it anyway
I tried faux 007b5, so overclock free too, I had 1.55ghz indeed, but never for quadcore, just for single or dual. Sadly I wasn't able to reach 1.5ghz quadcore but 1.4
With 007u, I have 1.5ghz quadcore, but 1.55 is an unused frequency
Can you check, with tegrastats, if you reach 1.55ghz quadcore or only for 1,2 (or3??) cores?
Click to expand...
Click to collapse
I tried tegrastats and I got 1.55 4 cores for about 20 sec and then 2 shut of and then ran 2 at 1150 playin dead trigger and on cod zombies 2 cores at 1350 witch I find strange faux 0105b
Sent from my HTC One X using xda premium
I am using ElementalX kernel on stock 4.4.4 android. I have to OC set to 1.944GHz currently. AnTuTu bench at 1.944GHz and 450MHz GPU gives me between 24-25k result. Now if I lower the CPU to 1.89GHz it drops to 21k. And if I go back to stock freq I get 19k. Something does not seem right in the test results as related to the frequencies. Question is this: Are there sweet spots in the frequency range for the CPU?
P.S. I know many people dislike benchmarks...I'm using it for comparative purposes...
mrcoffee1985 said:
I am using ElementalX kernel on stock 4.4.4 android. I have to OC set to 1.944GHz currently. AnTuTu bench at 1.944GHz and 450MHz GPU gives me between 24-25k result. Now if I lower the CPU to 1.89GHz it drops to 21k. And if I go back to stock freq I get 19k. Something does not seem right in the test results as related to the frequencies. Question is this: Are there sweet spots in the frequency range for the CPU?
P.S. I know many people dislike benchmarks...I'm using it for comparative purposes...
Click to expand...
Click to collapse
It states it in the thread, having cpu at 1.9ghz is not economical with battery consumption and performance, it Is best at 1.7ghz
mrcoffee1985 said:
I am using ElementalX kernel on stock 4.4.4 android. I have to OC set to 1.944GHz currently. AnTuTu bench at 1.944GHz and 450MHz GPU gives me between 24-25k result. Now if I lower the CPU to 1.89GHz it drops to 21k. And if I go back to stock freq I get 19k. Something does not seem right in the test results as related to the frequencies. Question is this: Are there sweet spots in the frequency range for the CPU?
P.S. I know many people dislike benchmarks...I'm using it for comparative purposes...
Click to expand...
Click to collapse
You should monitor your CPU temp and frequency while benching.
You would see that your CPU's temp probably goes above 70°C if not higher and so the kernel thermal throttling policies would downclock your CPU's max freq. in order to keep your CPU "cool".
If you first bench @ 1944MHz then bench @ a litle lower frequency and have very lower score then its not because of the lower freq. but because you did first heat up your CPU @ 1944 and when you re-run @ lower freq. your CPU is already very hot and so does a severe thermal throttling.
Last point : running your CPU @ 1944MHz is not good since thermal throttling while happen every now and then.
Not convinced?
Then simply launch the camera app and try to take a video of 5 mins...your CPU will become so hot that it will downclock to something ridiculously low and your recording will become jerky.