[Q] Clockwork mod keeps freezing during backup! how to fix it? - Epic 4G Q&A, Help & Troubleshooting

i was on the gingerbread leak, but got tired of it cuz its not completely stable, and i had clockwork mod 3.1.0.1 and it worked fine. i flashed back to ec05, froyo, and flashed clockwork mod 3.1.0.1 and it keeps freezing. i have ran error checking on my computer and re formated it in android and no luck. keeps freezing in the same spot! do i need to try a different clockwork version?

I have never had that issue, but how long are you giving it to run the backup? Also, why did you need to re flash cwm? Are you using rom manager or 3 finger boot to get into recovery? Here is a link to the acs recovery which is a modified version of cwm 4. If you install it you will have acs recovery on 3 finger boot and whatever recovery that is included with your kernel (probably cwm 3.1.0.1) via rom manager still.
http://forum.xda-developers.com/showthread.php?t=1272906

jeffro18 said:
I have never had that issue, but how long are you giving it to run the backup? Also, why did you need to re flash cwm? Are you using rom manager or 3 finger boot to get into recovery? Here is a link to the acs recovery which is a modified version of cwm 4. If you install it you will have acs recovery on 3 finger boot and whatever recovery that is included with your kernel (probably cwm 3.1.0.1) via rom manager still.
http://forum.xda-developers.com/showthread.php?t=1272906
Click to expand...
Click to collapse
it would run perfectly smooth on gingerbread. and it gets stuck on backing up system on file #11596 or something like that, and clockwork doesnt have an offical recovery for my phone so i have to use odin to flash a recovery. so i use the 3 finger boot. ill try the acs recovery and see what happens. if not ill have to go back to 3.0.0.5, which is the one that came with the rom.

Related

[Q] Revert to ClockworkMod 2.5.0.5

I've been having trouble with ROM installs and Nandroid backup / restores since I used ROM Manager to update recovery from ClockworkMod Recovery v2.5.0.5 to v2.5.1.2.
I would like to revert back to v2.5.0.5. I have the recovery-clockwork-2.5.0.5-inc.img and recovery-clockwork-2.5.0.5-inc.zip. If I run the .zip file from the 2.5.1.2 recovery, it temporarily shows "ClockworkMod Recovery v2.5.0.5" as the running recovery, but slips back to 2.5.1.2 upon reboot.
At this point my ROM / backups aren't booting. I can get to the adb shell while in v2.5.1.2 recovery. Is there a way to flash back to ClockworkMod Recovery v2.5.0.5 from adb shell?
Thanks,
Dan
I renamed recovery-clockwork-2.5.0.5-inc.zip to update.zip and put it on the root of my SD card. I rebooted into hboot and it ran the update.zip, then booted into ClockworkMod Recovery v2.5.0.5. Unfortunately when I rebooted into recovery again, it was back to v2.5.1.2.
Someone has to have done this before... At this point my phone is dead to me, so if anyone has any suggestions, I'm anxious to hear them.
Place this PB31IMG.zip on the root of your sd card and install through HBOOT.
Being an older version, it may or may not work, but is worth a shot.
"No image or wrong image" when trying to boot that from HBOOT. It won't install it.
Xylite said:
"No image or wrong image" when trying to boot that from HBOOT. It won't install it.
Click to expand...
Click to collapse
Make sure your sd card is formatted to FAT32 rather than FAT and that your computer didn't inadvertently rename the file to PB31IMG.zip.zip or pb31img.zip.
Thanks for the quick response. The file is named PB31IMG.zip (capitalized properly, no extra .zip extension). The SD card is FAT32. I was able to flash a update.zip this morning using the same setup. Would it be advisable to rename the PB31IMG.zip to update.zip just to get it to flash?
What is this PB31IMG.zip? Is it back to the stock RUU or is it the ClockworkMod 2.5.0.5 Recovery?
It's CWM, downloaded straight from Koush's site and inserted into a zip by me.
Another alternative, if you are able to do so, is to use Unrevoked to install the recovery image.
I thought of the same thing this morning. I'll have to try to get a ROM to boot to use Unrevoked, correct?
I tried running Unrevoked while my phone was in recovery, but the Unrevoked 3.2 tool didn't like that too much.
My problem is that after installing a new ROM or restoring a Nandroid backup, the white HTC Incredible splash screen appears indefinitely. It doesn't seem to hand off into the ROM properly. I have gotten a ROM to boot all the way to the desktop before but it bootloops shortly thereafter.
I guess my path forward at this point is to try to get a ROM to boot to the homescreen, then run Unrevoked. Can I run Unrevoked on an already rooted ROM?
unrEVOked tool reports that it should not be run on any device that is not in perfect working order or it risks permanent damage.
PLEASE!!! Anyone that knows how I can flash back to a prior version of recovery please help.
Maybe I'm doing something else wrong... The only ROM I can successfully flash is Incredibly Re-engineered. Unfortunately this ROM has a bootloop issue after some time (known issue, see the development thread and lots of people have the same problem). To install a different ROM, I'm downloading via ROM Manager (SkyRaider or Virtuous for instance), clearing data and cache in recovery (with system and data mounted), running ROM .zip selected from SD card. After the ROM successfully installs and I choose to reboot, my phone sits on the white HTC Incredible splash screen indefinitely. Is there something else I'm missing to flash from Incredibly Re-engineered to another ROM?
Beware of ClockworkMod Recovery 2.5.1.2 on your Incredible!
Xylite said:
unrEVOked tool reports that it should not be run on any device that is not in perfect working order or it risks permanent damage.
PLEASE!!! Anyone that knows how I can flash back to a prior version of recovery please help.
Maybe I'm doing something else wrong... The only ROM I can successfully flash is Incredibly Re-engineered. Unfortunately this ROM has a bootloop issue after some time (known issue, see the development thread and lots of people have the same problem). To install a different ROM, I'm downloading via ROM Manager (SkyRaider or Virtuous for instance), clearing data and cache in recovery (with system and data mounted), running ROM .zip selected from SD card. After the ROM successfully installs and I choose to reboot, my phone sits on the white HTC Incredible splash screen indefinitely. Is there something else I'm missing to flash from Incredibly Re-engineered to another ROM?
Click to expand...
Click to collapse
Well, I've found some success. I couldn't figure out how to install an old version of CWM Recovery outright, but ROM Manager was able to successfully install the "alternate" recovery RA_GNM. I used this recovery to flash SkyRaider 3.5. Luckily, SkyRaider 3.5 comes with ROM Manager v2.5.0.7, which thinks ClockworkMod 2.5.0.5 is the most recent recovery. So I was then able to flash back to CWM 2.5.0.5 using ROM Manager before it realized that 2.5.1.2 was the most recent version.
To summarize, I think my phone is back to normal.
PLEASE tread lightly when upgrading your Incredible to 2.5.1.2!

[Q] how to remove amonra recovery

So I don't want to unroot. I have amonra, clockwork, and rom manager. When I boot into recovery it goes straight to ra recovery, I have to flash the update.zip to get to clockwork. I would just like it to boot straight to clockwork or to remove ra
I installed rom manager the other day and updated to the latest version thinking that would overide ra when booting to recovery from rom manager, only for ra to come up saying 'bad' update.
I know this will more than likely be simple, I have done a few searches but not found much apart from unrooting.
stevoh84 said:
So I don't want to unroot. I have amonra, clockwork, and rom manager. When I boot into recovery it goes straight to ra recovery, I have to flash the update.zip to get to clockwork. I would just like it to boot straight to clockwork or to remove ra
I installed rom manager the other day and updated to the latest version thinking that would overide ra when booting to recovery from rom manager, only for ra to come up saying 'bad' update.
I know this will more than likely be simple, I have done a few searches but not found much apart from unrooting.
Click to expand...
Click to collapse
you need to re run unrevoked and untick use custom recovery so it flashes clockwork or use custom and select a clockwork recovery of choice
its in the clockworkmod thread in the dev section and the amonRA thread
please read them
Hello!
You need to unrevoked again....Downolad unrevoked for your phone, BEFORE to plug your phone to your computer go in the up left corner and choose your recovery , wich can be amonra or clockwork mod, let computer do the job and voila! You are donne
Thanks you very much dudes. I was a total noob to all things root when I did mine and just followed steps from a mate. I couldn't remember how RA got on there. Cheers
Sent from my HTC Desire using XDA App
Hey, so I hope you guys check this. I tried running the unrevoked again.
Only for it to seemingly get right to the end and attempt root (I thought it was just going to reflash and slap the clockwork in there) for it to say Error: failed to get root - Is your firmware too new?
Is there an easy way around this? Or is it the rom I am running??
I haveOxygen-20. RC6
stevoh84 said:
So I don't want to unroot. I have amonra, clockwork, and rom manager. When I boot into recovery it goes straight to ra recovery, I have to flash the update.zip to get to clockwork. I would just like it to boot straight to clockwork or to remove ra
I installed rom manager the other day and updated to the latest version thinking that would overide ra when booting to recovery from rom manager, only for ra to come up saying 'bad' update.
I know this will more than likely be simple, I have done a few searches but not found much apart from unrooting.
Click to expand...
Click to collapse
how did u do that ?!?! i have ra recovery but dont want it beacuse strangely i cant and am unable to flash an roms by it !! i dunno wat d fault is but im doing evrythn correctly.. plz help me ! can i have two recoverys like u ? and how !? btw i have lg p500... plz help ! i want some other recovery so that i can flash roms from it... for some reasons im not being able to flash roms from ra recomery aka "amon_ra_recovery_installer".. any help will be appreciated !!
You don't get 2 recoveries. If you 'fake flash' using ROM Manager it'll lose CWM instead of your normal recovery
You could try to S-OFF with AlphaRev iso (which will also update the recovery to CWM-AlphaRev 2.5.1.8 with dark blue color)
When you are S-OFF you can update the recovery with fastboot
If you don't want or cannot do all this, you could try to fake flash the CMW 3.2 recovery when you need it.
Fake flash means to load another recovery (3.2) while in recovery (2.5) by simply applying a zip file. You then have all the feature of the 3.2 recovery without permanently installing it.
1) put the zip with 3.2 recovery on your SD card (zip in thread: http://forum.xda-developers.com/show....php?t=1039954)
2) boot in recovery
3) apply the zip (like you would flash a rom, but it only loads the 3.2 recovery operating system without removing/deleting any file in your phone). You should notice the text color change and a few more options in the menu.
4) enjoy
Fake Flash is more or less what what Rom Manager is doing when you use it to reboot in recovery mode (but it only supports a restricted set of recovery versions that have been tuned to work with Rom Manager).
Another benefit of fake flash is that you can still use your old nandroid backups, as it it not recommended to restore with recovery X a backup made with recovery Y.

Clockwork mod recovery issue?

I am new to the whole rooting and flashing roms and kernels. I rooted my epic 4g touch via QBKing77's videos and then followed his video on how to install the clockwork mod recovery with the agat recovery. Then I went to google play and bought ROM manager pro and clicked "flash clock workmod recovery" and it showes that I have the latest version flashed, but when I then go to "boot into recovery" it boots into the clockwork mod recovery but when I try to use my volume buttons to navigate nothing happens. But they work in AGAT recovery? Whats wrong? What should I do?
Thanks
Im having similar issues with CWM. I have premium installed and when I click boot to recovery it goes to a weird android recovery with an android twirling something but there is no option for an image nandroid backup...and when i click on make a backup from the CWM menu it takes me to the same screen but says error and aborts... have the stock root...ff18....i have verified root. I also have odin mobile...it would be nice to be able to just upload whatever i meed from there without having to go thru all this odin stuff...Never had to with my att skyrocket 2
Why did you buy rom manager pro. Rom Manager can not flash recoveries on this phone. Recoveries are packed into the initramfs of our kernel unlike most phones. At best you get a temp flash which by the way has proven to be an unsafe thing.
I am not familiar if anyone has any updated safe repacks with just plain stock cwm. But there are custom recoveries based on it for stock TW roms. CM9 has stock CWM and TWRP though.
I don't think the video told you to buy rom manager pro and or to try and flash recoveries with it. You flash kernels that have recoveries. You can do this with tar's in odin/mobile odin and or if you have custom recovery cwm zips then.
AHHH was about to say i just realized i needed to update the correct kernel in order for it to work...thank you for the lightning quick response tho...
B
Okay thanks. So i can use the agat recover to wipe caches and install zips?

[Q] issue with agat recovery/cwm 6

Hi everybody!
I'm having an issue with agat recovery. After flashing cyanogenmod beta 2, agat recovery v2.2ish disappeared and in place was CWM version 6 something. Not sure why this is happening as i'm new to rooting/flashing.
Here's a history of what I did so far. Rooted the phone using qbking77 instructions, installed agat recovery using mobile odin, made nandroid backup, then flashed cyanogenmod beta 2. a few days later installed JB Tweaks & Fixes by exit_only. A few days later noticed that agat recovery wasn't there and in it's place was CWM v6.0.1.5.
So... here's the sketchy part, for some reason I thought since mobile odin wasn't installed, agat must have uninstalled itself as well. so I installed mobile odin again, flashed agat recovery again. the phone rebooted but it wouldn't bootup after the samsung splash screen (blank display). I tried to boot into recovery (volume up + power button) which worked, agat recovery was back! since the phone wasn't booting up, I decided I should do a nandroid recovery but at the last minute thought I should flash cyanogenmod beta 2 again with gapps just to see if it would work. rebooted the phone after both were installed, it was back to normal but when I checked if agat recovery was there, it was changed back to CWM 6.
how do I get agat recovery back? Thanks!
recoveries on this phone is packaged with roms. so flashing cm will bring its recovery along with it
calisro said:
recoveries on this phone is packaged with roms. so flashing cm will bring its recovery along with it
Click to expand...
Click to collapse
Thanks!
so if I wanted to flash another rom, I can just go into cwm recovery & erase dalvik cache & all user data and select flash rom?
Yes. The recovery that comes with CM is a safe recovery. Typically what I tell people is to be safe and always flash from a safe recovery. If ever in doubt, odin (in pda slot) or mobile odin this recovery and then flash whatever rom you want:
http://shabbypenguin.com/k0/ecm/E4GT-EL29-directbootCWM-v3.tar.md5

[Q] Won't boot rom or cwm recovery - only download mode

Hi! I have encountered a problem, and really hope someone can help me!
Two days ago i flashed Omnirom Nightly on my n7105 to get Android 4.4. I was running cmw recovery but couldnt get the ota updates to work, so i was trying to flash open recovery instead. I used an apk that was supposed to install a script.
When i rebootet my phone, all i could get was the Note 2 boot image. It wont boot into recovery mode, or the rom. I am however able to boot into download mode.
Custom Binary download: Yes (4 counts).
Current binary: Custom
System Status: Custom.
How should i proceed? I've already tried to reflash cwm recovery, which did work, but didnt solve the problem. I am currently downloading stock firmware, but the file is 1.2 GB so it will take i while. Figured i should ask here in the meanwhile.
I'm not an expert at Android at all, im just a guy enjoying having custom roms and playing around a little. I do know that there are a lot of very talented people in this forum, and i really hope someone can help me find a solution. I've been googling for hours, but cant find anything that seems to work for me / or i dont fully understand and wont risk try before someone approves it.
Thank you, Vetle
EDIT: Is it correct that i cant flash any custom rom trough Odin? Or could i just flash omnirom again trough Odin?
If i manage to flash the stock rom and the bootloop goes away, will everything go back to normal, so i can flash cmw again and then a custom rom again?
No custom rom can be flashed through odin, as most of them are zip cwm/twrp base.
When u can only go to download mode, an official firmware only can help u through odin.
Sent from SM-N9005 with xda-app
Thanks for the answer!
Yup, i have flashed a stock rom now and i got the stock recovery. Everything was working fine.
Then i proceeded to do a factory reset in the stock recovery and flashed cwm trough Odin. When it was done, it wouldnt let me into recovery again! I can still boot up the phone tough.
I've also tried Open recovery. CWM via Rom manager. Open Recovery trough Goo Manager... Still cant get recovery to work, the stock rom works tough.
Any ideas?
Okay, i tried to flash the stock rom again and installed Rom Manger.
It still showes TWRP and CWM under installed recovery and i guess these its these two who makes the problem.
My plan now is to figure out how to completely remove them. I've never done anything related to adb before, so i hope it possible to remove them in another way?
This is so weird. Somehow i managed to install CWM Touch via Rom Manager and it booted. When i choose reboot /pull battery it will only boot straight into CWM again. I tried to flash TWRP via Odin, wich sucseeds, but then it reboots into CWM again!
I am soo lost its almost funny!
EDIT: Since i could get into cwm now, i tried to flash omnirom, but it aborts and all i get is status 7...?
EDIT2: Latest now is that i suddenly managed to install TWRP via Odin, but i still cant install the latest omnirom, all it says is "updating partition details".
vetle666 said:
This is so weird. Somehow i managed to install CWM Touch via Rom Manager and it booted. When i choose reboot /pull battery it will only boot straight into CWM again. I tried to flash TWRP via Odin, wich sucseeds, but then it reboots into CWM again!
I am soo lost its almost funny!
EDIT: Since i could get into cwm now, i tried to flash omnirom, but it aborts and all i get is status 7...?
EDIT2: Latest now is that i suddenly managed to install TWRP via Odin, but i still cant install the latest omnirom, all it says is "updating partition details".
Click to expand...
Click to collapse
I had recovery problems in the last few days also.
Installed DN3 rom using philz recovery, because its capable of prepare the phone to a new rom in a easy way.
It all went fine until first reboot.
I had a recovery boot loop. All I could see were some buttons and then reboot again.
Like you I had download access and flashed philz with Odin, but no luck.
Installed twrp via Odin and all was fine, and flashed philz new version.
Then I had to flash a new kernel (to be able to access wifi) and it all started again. Now I'm back on twrp.
Let's see what happens on my next flash.
My suggestion is to flash the recovery, and if that's OK flash the rom and use it
Next time you need recovery get Odin to help, but not all the way from an original rom. Just the custom recovery.
But if you want to get rid of your strange recovery configuration, and you are not already on new 4.3 recovery(which in your case could explain some of the problems you had) , with knox, install an older original rom, 4.1, and make all the steps, root it, install a custom recovery, and from there the room you want.
Reading your path sorting this problem, that was what would do next
Best regards

Categories

Resources