Develop Bugs

I'm lost. Need rooting help.

I'm lost as hell. I found this thread:
http://www.androidpolice.com/2010/06...credible-next/
I did the unrevoked thing and I see this icon called SuperUser Permissions in my app list.
Am I able to proceed and fully root or do I have to re-do the root with the Toast method? This looks too complicated and by the way I tried the ./adb thing on my mac and I get errors saying "No such file or directory".

gqstatus0685 said:
This looks too complicated and by the way I tried the ./adb thing on my mac and I get errors saying "No such file or directory".
Click to expand...
Click to collapse
adb isn't installed on a Mac out of the box; You'll need to go download the Android SDK. Untar it somewhere (I put it in ~/), then open a term, do:
Code:
cents-macbook-pro:~ $ cd android-sdk-mac_86/tools/
cents-macbook-pro:~/android-sdk-mac_86/tools $ ./adb

CentroniX said:
adb isn't installed on a Mac out of the box; You'll need to go download the Android SDK. Untar it somewhere (I put it in ~/), then open a term, do:
Code:
cents-macbook-pro:~ $ cd android-sdk-mac_86/tools/
cents-macbook-pro:~/android-sdk-mac_86/tools $ ./adb
Click to expand...
Click to collapse
Massive Brain Freeze.. What do you mean by "(I put it in ~/)"?
I downloaded the Android SDK already. I understand what terminal is so when I download the Android SDK where do I place it?
Am I pointing terminal to the directory? Android SDK is currently in a folder on my desktop.

gqstatus0685 said:
Massive Brain Freeze.. What do you mean by "(I put it in ~/)"?
I downloaded the Android SDK already. I understand what terminal is so when I download the Android SDK where do I place it?
Am I pointing terminal to the directory? Android SDK is currently in a folder on my desktop.
Click to expand...
Click to collapse
~ in most flavors of Unix/Linux is short for your home directory. In MacOS, ~ is /Users/<username>. *nix pro-tip:
Code:
cents-macbook-pro:~ $ echo ~
/Users/cent
So in my case, ~ is short for /Users/cent.
If it's on your desktop, open a terminal and type:
Code:
cd ~/Desktop/android-sdk-mac_86/tools
-OR-
Code:
cd /Users/cent/Desktop/android-sdk-mac_86/tools
And then you can proceed to issue your adb commands. Just remember to prefix it with "./", which tells MacOS to look in the current directory for the adb command.
Code:
cents-macbook-pro:~/android-sdk-mac_86/tools $ ./adb devices
List of devices attached
HT05RHL1XXXX device

Ok. I think I'm just going to pay someone to do this for me. I'm getting a migraine.
So I'm basically typing the below:
~/android-sdk-mac_86/tools $ ./adb devices (Do I type this in one line)
List of devices attached
HT05RHL1XXXX device
I ran the thing and it doesn't show my phone listed.

I've got the time, if you have the money!
1. Make sure USB debugging is enabled. On your phone, go to Settings -> Applications -> Development, and make sure "USB debugging" is checked.
2. Make sure your USB cable is connected to your phone and computer.
3. Open a terminal
4. Type "cd ~/Desktop/android-sdk-mac_86/tools" and press enter.
5. Type "./adb devices" and press enter.
If it lists your device, you're then good to go to start following the rooting instructions!

You're the best dude. It was the USB debugging that was giving me the problem.

Good deal man, glad you got that part worked out! Have fun getting your root on!

this is the easiest way to do it....it worked for me
http://forum.xda-developers.com/showthread.php?t=701152

Do i have to keep dubugging mode on or can I turn it off before I root it. I did the command:
"cd ~/Desktop/android-sdk-mac_86/tools"
and then
adb push PC36IMG.zip /sdcard (Doesn't do anything. I tried without the space and some stuff popped up. Can I just manually put it on my SDcard?

gqstatus0685 said:
Do i have to keep dubugging mode on or can I turn it off before I root it. I did the command:
"cd ~/Desktop/android-sdk-mac_86/tools"
and then
adb push PC36IMG.zip /sdcard (Doesn't do anything. I tried without the space and some stuff popped up. Can I just manually put it on my SDcard?
Click to expand...
Click to collapse
Debugging mode needs to stay on if you want to use adb. You can turn it off once you root, but it won't hurt to leave it on.
The push command should tell you the number of bytes transfered. You need to make sure that the file you are pushing is in the current directory you're in (tools), or manually enter the path, like "./adb push ~/Downloads/PC36IMG.zip /sdcard"
But yes, you can mount the card as a disk drive and copy the file there in Finder.

[GUIDE] Using ADB & FASTBOOT in OSX / Mac

Hi,
I thought I'd add this here because I've recently starting using OSX after building my own hackintosh out of PC parts. I got very fed up with Windows and the need for drivers all over the shop so I'm moved over now.
I've also just got into flashing my HTC Desire and it was made very easy by lots of the guys here. One thing that will always be useful when rooting and flashing your phone is ADB. There are lots of guides out there for ADB on Windows but I wanted to run in natively in OSX.
After a lot of research and a few failed attempts .... I've now worked out how to run ADB in OSX.
What you will need:
A Mac
USB cable
Android SDK for OSX- http://developer.android.com/sdk/index.html
At the time of writing this the version was "android-sdk_r08-mac_86" so please have a look at the above link and let me know if you can't find that same version.
So download the zip file and I would extract it to a folder where you are happy to keep it such as within your user home folder i.e. Macintosh HD/Users/{Your User Name} and for my mac it is Users/siedkins which is how I have my OSX set up.
Then open then still in Finder, open "android-sdk-mac_86" then "tools".
Now launch Terminal - ⌘ + space then type Terminal or Applications>Utilities>Terminal
Now drag and drop the file called "android" in the "tools" folder into your terminal window and you should see something like:
/Users/siedkins/android-sdk-mac_86/tools/android
Then hit enter - this should load Android SDK
Next go to Available Packages on the left and Android Repository > Android SDK Platform-tools, revision 1 -tick the box and hit "Install Selected"
It should download and install the Platform Tools which includes ADB !!!!
Now quit Android SDK after it has downloaded and go back into Finder. Now you should see a new folder "platform-tools" in the "android-sdk-mac_86" folder. Open that and you can now see a file called adb.
Now .... I am going to show you how to make your life a lot easier in Terminal to run ADB without having to navigate to the folder every time you want to launch it.
Go back to your Terminal window and type (or copy & paste):
Code:
cd ~
The screen should then look like
NAME_OF_YOUR_MACHINE:~ USERNAME$
For me I have:
Mac-Pro:~ siedkins$
Next, type
Code:
touch .bash_profile
to create your new bash / path file
Next, type
Code:
open -e .bash_profile
to open it in TextEdit.
Now into Text Edit please copy:
Code:
export PATH=${PATH}:
Then go into Finder and navigate your your "android-sdk-mac_86" folder. Then click on the "platform-tools" folder and drag and drop this into TextEdit at the end of the code above that you copied. Mine looks like:
export PATH=${PATH}:/Users/siedkins/android-sdk-mac_86/platform-tools/
Yours should look like:
export PATH=${PATH}:insert your path to the "platform-tools" folder in your Android SDK here
All you need is that one line. Then Save and exit TextEdit and then very importantly QUIT TERMINAL.
***** If you have issues being able to save the file at all then please jump to the bottom of the post*****
Now ........ to turn on USB Debugging in your handset Settings > Applications > Development > USB Debugging - ticked and also go to Settings > Connect to PC > Default connection type > Charge Only and also UNTICK "Ask me ..." there also. You can always go back here and change these settings back.
Now plug in your phone to a USB port. I noticed that if I plugged my phone into one of the standard USB ports on the front of my machine I couldn't see the phone further down the line and if I plugged it into a powered USB port on the front (I have an "akasa AK-ICR-08" which has a powered connector behind the 5 USB ports. But you guys will probably be using a MacBook or MacPro and there shouldn't be any issues with the power to your USB ports.
Now to launch ADB - re-open terminal (remember that you had quit it - very important!) then type in:
Code:
adb devices
And you should see:
List of devices attached
HXXXXXXXXXX device
where XXXXXXXX is your unique phone ID.
Now you can run all of your favourite ADB commands straight by typing:
adb shell
etc straight into Terminal. I won't go into that here as there are plenty of guides about what to do with ADB once it's installed!
Now you have ADB setup on your Mac and can run it without the need for installing HTC Sync - un-installing it - loading some modified drivers over the top !!!!
It all just works !!!!!!
Please drop me a line if you have any queries about this !
******************
If you are have user account issues such as Terminal or TextEdit says that you can't do anything then try adding "sudo" to the front of your terminal command as this will allow you to execute the account as a superuser or root user for OSX! ROOT!!! Note that you will have to enter your password to enable the superuser access rights and you won't see anything as you type in your password.
i.e. try:
Code:
sudo touch .bash_profile
then
Code:
sudo /Applications/TextEdit.app/Contents/MacOS/TextEdit .bash_profile
(slight change in the coding here to ensure that TextEdit opens
Or you could do:
Code:
sudo pico .bash_profile
This will open up the Pico text editor instead of TextEdit. Here you will have to type out all of the text then you press "ctrl+x" to exit and then you can save on the next screen. To check that has worked you can then open the file in terminal again and check it with the normal command:
Code:
open -e .bash_profile
******************
Please see post #37 for How To Use ADB Over WIRELESS !!!!
************************************************************************
EDIT - 27th JAN 2010
FastBoot
I've now found you all a precompiled version of Fast Boot:
http://developer.htc.com/adp.html
Please download and unzip the precompiled version for OSX to your "SDK/platform-tools" folder.
Rename the unzipped file from "fastboot-mac" just to "fastboot". You need to fix the permissions of the fastboot file using CHMOD in Terminal.
In Terminal navigate to your "SDK/platform-tools" folder and then type:
Code:
ls
You should see all of the files in your "platform-tools" folder such as adb, aapt, fastboot, etc.
Then type:
Code:
chmod 777 fastboot
PLEASE NOTE THAT I AM ASSUMING THAT YOU HAVE CHANGED THE FILE NAME ABOVE !
Now with the permissions fixed you should be able to run fastboot.
Connect your phone via USB and set to "charging only". Then turn off your phone and leave the USB in. Then hold the back key and then turn your phone on again. You will have a white screen with 3 skateboarding androids on.
Now in Terminal type:
Code:
fastboot devices
And you should see your unqiue phone ID! (Note that you have to be at that white screen with the skateboarders for the "fastboot devices" code to run!
Now you have a fully working fastboot !!!
Sorry this explanation is a bit short - I did write out a longer one but my browser crashed and I lost it all. However if you cannot follow the above then I think it's maybe best that you don't use fastboot as you could seriously brick your phone.
NOTE - I HAVE NEVER USED FASTBOOT TO FLASH A RADIO OR PHONE SO I PROBABLY WON'T BE ABLE TO HELP IF YOU GET ERRORS IN USING FASTBOOT OR FLASHING YOUR DEVICE ! The above information is how to shortcut the navigation to the folder. Please don't blame me if you break the recovery image of your phone!

Thanks for such a thorough step by step guide. But Im having a problem I followed the directions and at the last step I get "permission denied". Any tips for me would be truly appreciated. Thanks

dhoshman said:
Thanks for such a thorough step by step guide. But Im having a problem I followed the directions and at the last step I get "permission denied". Any tips for me would be truly appreciated. Thanks
Click to expand...
Click to collapse
which last step ?

dhoshman said:
Thanks for such a thorough step by step guide. But Im having a problem I followed the directions and at the last step I get "permission denied". Any tips for me would be truly appreciated. Thanks
Click to expand...
Click to collapse
What version of MacOS? Also are you sure your device is properly rooted? I'm assuming you are getting the error when typing "adb devices"?
EDIT: That's what I get for being distracted while typing this.. ;-)

The easiest way to get the sdk is by using homebrew, which is an amazingly useful tool. https://github.com/mxcl/homebrew
Code:
brew install android-sdk
It doesn't add adb to your path however, you have to do that manually by adding /usr/local/Cellar/android-sdk/r8/platform-tools to your path.
Hope that makes it a little bit easier.

I found that on my mac using terminal I have to always start the adb commands with a ./ otherwise it wouldn't work right. This might be common knowledge for some, but I'm a terminal newbie
So, for example:
./adb devices

Thanks for the walk through
This work great. I put the the SDK folder on the root of Macintosh HD and renamed it to AndroidSDK. Then in the .bash_profile my path was /AndroidSDK/platform-tools/ . I then made a backup of my SD card with adb pull from /mnt/sdcard to my local machine.

mun-key said:
I found that on my mac using terminal I have to always start the adb commands with a ./ otherwise it wouldn't work right. This might be common knowledge for some, but I'm a terminal newbie
So, for example:
./adb devices
Click to expand...
Click to collapse
Kind of weird. To me that would mean that you're path variable isn't setup correctly. Usually the ./ before a command means to run the command from the current directory and ignore the path variable.

It doesn't even have to be this complicated. Download the sdk, whatever files you want to push to your phone put it in the same folder. Then do the commands (./adb push). Simple.

Great and easy tutorial! Got it working in 5min ^_^

madj42 said:
Kind of weird. To me that would mean that you're path variable isn't setup correctly. Usually the ./ before a command means to run the command from the current directory and ignore the path variable.
Click to expand...
Click to collapse
Ok - that makes sense now. And reading Krisrk's reply, that's exactly how I did it.
On my device I only needed to push a single file. Don't really need adb anymore. Your post was like 12-hours too late for me though. I spent 3 hours trying to figure out why it wouldn't work, then saw the ./ in a youtube video. After that I was rooted with a new rom in minutes
thanks for all the great info guys

Just wanted to thank you! I already had ADB working on my Mac OSX but didn't have the "environment variables" in the .bash_profile. So now I can just use adb commands directly without going into the finder and find the adb!
Also, kudos for the very detailed guide with your own examples, that reads very well!

Thanks for the comments guys.
I know that you can navigate to the SDK folder and just run it from there but I thought that people might like the above guide to do the shortcut once and then never have to jump around folders again in terminal which is a bit of a pain. Plus my method removes the need for the "./" prefix.
anyways I'm easy I'm sure that everyone will have their own preferred method if you already use adb on OSX

i cannot get beyond the command:
touch .bash_profile
the terminal returns permission denied. what do i need to add or what am i doing wrong?

What type of user account do you have set up in OSX?
System Prefs > Accounts
Also what about trying the following in Terminal
Code:
sudo touch .bash_profile
And then enter the password for your user profile?
Any better?

Thanks for this!!!!!
Nobody ever shows macs love.
Sent From My HTC Evo 4G Using Tapa Talk Pro!

siedkins said:
What type of user account do you have set up in OSX?
System Prefs > Accounts
Also what about trying the following in Terminal
Code:
sudo touch .bash_profile
And then enter the password for your user profile?
Any better?
Click to expand...
Click to collapse
it popped up and asked my password, then it said i entered the wrong one and i never was asked this again. this is incredibly frustrating as i cannot even get it to work in windows
edit: ok got to the part where i bring up text edit, but it will not let me save. states i do not have permission to save. is there a way i can turn off this password crap for the time being? all i want to do is push files to my phone, i can't even get this far

Ok...
I'm trying not to look stupid, but for gods sake, im stuck at the first command. I copy paste cd~ and nothing happens. press enter nothing. I've been reading up on terminal and i still feel quite stupid considering how im stuck on step one
edit: got it! I got lost going back into the same terminal and not closing the android sdk window. there fore I was still in the sdk and not telling the computer anything. a dur. Opening a new terminal and doing all of the steps did the trick. Thanks for this btw!

thanks for the detailed guide. i've been looking all over the web for a guide to setup adb for MAC. followed the steps here and now, i'm able to use ADB on my macbook. YAY!!

monstereo said:
thanks for the detailed guide. i've been looking all over the web for a guide to setup adb for MAC. followed the steps here and now, i'm able to use ADB on my macbook. YAY!!
Click to expand...
Click to collapse
Hey just a random note, nice prof pic stig ftw

Rooting the TF300T *without* downgrading (from .29) - the Mac instructions

These instructions are not solely my own and are adapted from miloj’s Windows based instructions found here:
http://developer.android.com/sdk/installing.html
Thank you miloj for the instructions!
This guide is intended to help noobs with rooting their TF300T device with a Mac. I am probably a half step above noob, so please don’t expect perfection.
Read this these instructions straight through, maybe even a couple of times before you begin to make sure you fully understand what you are doing.
I am not responsible for any bricked devices, malfunctions, etc. and most likely will not be able to problem solve much for you. Hopefully, the real geniuses here on XDA will jump in should you need extra help.
First off, make sure you have Android SDK and ADB installed. Follow these instructions skipping the Eclipse installation step (unless you plan on developing apps and such):
http://developer.android.com/sdk/installing.html
Save these files wherever makes sense to you and once done open up the folder containing adb in file explorer and leave open. This should be in the SDK>platform-tools folder.
Now for miloj’s instructions with some Mac specific extras and for sake of ease:
Download the debugfs and su binary files provided by miloj first from here:
http://db.tt/FBUNeVmo
Again, save these files where it makes sense to you and then open up the containing folder in file explorer and leave open.
Make sure “usb debugging” is turned on on your Asus TF300T by going to Settings>Developer options and check the USB debugging options.
Make sure you device is plugged into your Mac via usb cable. Now find out if our Mac recognizes your device.
Open up terminal from your utilities.
Organize your Terminal and folder containing adb on your workspace so you can easily access both. Click, hold, and drag the adp icon and drop it into the Terminal window. This will allow you to you immediately move into the adb command without having to type in the complete destination. Your line should end with “…/adb” now type in the command devices and hit return/enter.
NOTE – from here on out assume after every command you hit “return” or “enter”
It will look something like this:
Code:
…adb devices
the response should read:
List of devices attached
{serial number} devices
If nothing is listed, then you either didn’t activate USB debugging or your adb isn’t up to date, start again from the top.
If it showed your device, then lets move forward.
Now we have to push over the debugfs file and the su file (superuser). Make sure you can see Terminal and both open file explorer windows listed above all visible on your workspace.
Again, click, hold, drag the adb into Terminal and then complete the following commands by typing the command (in this case “push”) in between adb and the proper file and then typing in the location you want it pushed to on the device: (*note: dragging and dropping the “debugfs”file where it says “debugfs” – your file destination path name will be shown, not just debugfs)
Code:
adb push debugfs /data/local/
In the command above you would drag into Terminal the adb file then type push, drag in the debugfs file then type in “/data/local/” all with spaces in between. Every time you read in a “Code” section “adb” you are going to follow this procedure with the adb icon/file. Now, rinse and repeat moving forward.
Then this command (dragging and dropping the “su”file where it says “su” – your file destination path name will be shown, not just su)
Code:
adb push su /data/local/
now you have debugfs and su on your device.
You now have to have Terminal take control and run commands in your device by using this command:
Code:
adb shell
once in you will have a line starting with a “$” and you type in the following commands to gain root access: (type them exactly as written)
Code:
cd /data/local/
mv tmp tmp.back
ln -s /dev/block/mmcblk0p1 tmp
exit
The “exit” takes you back into your Mac, now reboot your device through adb:
Code:
adb reboot
WAIT UNTIL THE TF300T HAS BOOTED UP AGAIN!
Now get back into the device:
Code:
adb shell
Continue with the following commands after the “$” symbol:
Code:
cd /data/local
toolbox chmod 755 /data/local/debugfs
/data/local/debugfs -w /data/local/tmp
Now you’re going to run the debugfs files. Make sure you are writing these all in EXACTLY as written. All lines preceeded by “debugfs:” you will type in the following:
Code:
cd xbin
rm su
write /data/local/su su
set_inode_field su mode 0106755
set_inode_field su uid 0
set_inode_field su gid 0
quit
Now, back in to lines starting with “$” and run these:
Code:
rm /data/local/tmp
mv /data/local/tmp.back /data/local/tmp
exit
Now reboot:
Code:
adb reboot
WAIT UNTIL THE TF300T HAS BOOTED UP AGAIN
You are rooted! Congratulations!
Let’s double check and do some clean up:
Code:
adb shell
From the line “$” type these commands for double check:
Code:
/system/xbin/su
Now the line is a hash tag “#” and type
Code:
id
The Terminal response should read something like this:
id=0 (root) gid=0 (root) … and so forth
Clean up:
Code:
rm /data/local/su
rm /data/local/debugfs
Done with Terminal.
Now, open up the Play store and download the Superuser app immediately. Once it is installed, open the app and go into the settings. Under the heading “GENERAL” Tap the “Su binary v…” to check for updates and update the app.
You are now rooted, you have Superuser control.
Let me know how this works for you!!!
Credits: wolf849 for exploit, and miloj for commands.

Good stuf, just wait firsts feedbacks about this process :good:
Inserted in the Index for TF 300t

Guess i'm the only person who either owns a Mac here or has tried this but...
First time Terminal user and first time ASUS owner. Was a bit iffy doing it. Read through the TF300 board for weeks and was scared as sh#t to mess with this but...
it works!! Thank you so much. :good:

ngocdao said:
Guess i'm the only person who either owns a Mac here or has tried this but...
First time Terminal user and first time ASUS owner. Was a bit iffy doing it. Read through the TF300 board for weeks and was scared as sh#t to mess with this but...
it works!! Thank you so much. :good:
Click to expand...
Click to collapse
I'm glad it was easy for you! I am not a pro Terminal user by any stretch of the imagination! I am a first time ASUS owner as well, and have only rooted 2 phones and worked on rooting another (the phone ended up being software updated via Verizon to the point of unrootable that I could find or figure out). I am a Mac user and do not have easy access to a Windows PC and figured there were plenty of other Mac users noob to rooting. Apparently, that lists is you and me!!!
Thanks for the feedback, though! Congrats on your root!!

...too dificult for me,
Thanks.
Enviado desde mi ASUS Transformer Pad TF300T usando Tapatalk 2

dirator said:
...too dificult for me,
Thanks.
Enviado desde mi ASUS Transformer Pad TF300T usando Tapatalk 2
Click to expand...
Click to collapse
It sounds intimidating, I know, trust me when I say this is rather easy! The first time I rooted my phone I was quite worried! I read the instructions a few times and took my time though and it was really quite easy! Read the instructions a few times and you'll be alright. If you start to have trouble come back here or to this thread http://forum.xda-developers.com/showthread.php?t=1704209 and ask for answers.

not working as expected
Sorry to bother you with noob's problems.
I think I unlocked my TF300T ww Jelly Bean 4.2.1 allright.
I moved debugfs and su and other files to /data/local/ through bluetooth 'cause I wasn't able to do it in any other way.
The process worked fine up to here:
mv tmp tmp.back
Then I got this message:
[email protected]:/data/local $ mv tmp tmp.back
failed on 'tmp' - Permission denied
also, when pressing Power + Vol Down and then Vol Up to choose RCK it just dies (lying android with red triangle)

[UNIVERSAL GUIDE] Root Any Android Device Manually !

THIS GUIDE NO LONGER WORKS BECAUSE ANDROID ISN'T WHAT IT USED TO BE BACK IN 2013-14.
PLEASE STOP WASTING TIME TO FOLLOW THIS OBSOLETE METHOD 1. PLEASE REFER ONLY TO METHOD 3​
The Ultimate Guide to Rooting any Android Device Manually !!!!​
Wanting to ROOT Your Phone but can't do Because Of No rooting Guides or want to learn to root any device ? Then , This Guide Is For YOU
OK So lets start....
**What You Need**
1.Your Unrooted Android Device.
2.ADB Drivers Installed On Your PC. If you Don't Have Download From Here :
Code:
adbdriver.com/‎
3. The Most Inportant Root Kit Made By Me (N'ayam Amarsh'e) - Download From The Attachment.
4.Strength And Courage 'Coz Rooting Voids Your Warranty... If You have a samsung device then Don't Worry Your warranty is gone forever... But if you own any other, maybe you can void it or maybe......
I've Written Android Device as ADV to make it more easy....
**Steps**
So you have the adb drivers installed let's go....
1. Open The root kit by Extracting The Rootkit with WinRAR....
2.Turn 'USB DEBUGGING' 'ON' in your ADV...
3. Connect your ADV to Your PC...
4.In the root kit Open Cmd.exe File ... [ IF YOU CAN'T OPEN CMD, GOTO C:/WINDOWS/SYSTEM32/ COPY CMD .EXE TO YOUR ROOTKIT FOLDER]
5. In CMD window Type the following command...
Code:
->adb devices *Your device will get listed in the window if it doesn't check your adb drivers or if you have followed the steps properly...
->adb push busybox /data/local/tmp
->adb push su /data/local/tmp
->adb push Superuser.apk /data/local/tmp
If you Succeed Move On ...
6.Then You need Root Shell Type :
Code:
adb shell
Note that you see a "$" sign in the command prompt. That means you are not in 'su' shell.
7.Next run the following commands in the shell to change permissions and get some limited privileges for the Superuser files:
Code:
->chmod 6755 /data/local/tmp/su
->chmod 755 /data/local/tmp/busybox
->chmod 644 /data/local/tmp/Superuser.apk
{Note}The names of the files are case sensitive!
8.Done ? Now You need to open a copy of linux which has nautilus... So enter your linux (I recommend using ubuntu 11.4) and type in the terminal (ctrl+alt+T)
Code:
->sudo nautilus
this will open nautilus with root privileges...
You can just boot it from USB so no hassle of installing it... http://www.cyberciti.biz/tips/download-ubuntu-linux-11-04-iso-cd-dvd-images-natty-narwhal.html
Having your ADV connected with USB to PC switch it off and put it in download/recovery mode...
superlouro said:
DEVICE OFFLINE?
! SOLUTION ! (click me)
Click to expand...
Click to collapse
9.In The Exploring Window navigate to
Code:
/data/local/tmp
and move/cut 'su' and 'busybox' to
Code:
/system/bin
...
10.From the tmp Folder you went earlier Move/cut 'Superuser.apk' to
Code:
/system/app
11.Now Reboot You ADV ... Congrats ! You're now ROOTED !
Many Users Are Having Problem with This Method, If you can't do the method 1. Try Method 2.
METHOD 2
PLEASE DON'T ASK ME ABOUT THIS METHOD, THIS IS JUST FOR A TRY, MY BROTHER FOUND THIS METHOD TO BE WORKING, I HAVEN'T TRIED IT YET!
This is linux based method, It's quite easy if you follow every step correctly...
You need to download psneuter, https://github.com/tmzt/g2root-kmod/tree/master/scotty2/psneuter
When you have it execute the following...
Code:
adb devices
Code:
adb push psneuter /data/local/tmp
This will copy the file to your device and now we'll execute it..
Code:
adb shell
cd /data/local/tmp
chmod 777 psneuter
./psneuter
Now You'll see
Code:
adb kill-server
adb devices
adb shell
now # will appear in place of $, or after typing $su.
Code:
# mount -o remount,rw -t rfs /dev/block/st19/system
# exit
$ adb push busybox /system/bin
$ adb push su /system/bin
$ adb install Superuser.apk
$ adb shell
# chmod 4755 /system/bin/busybox
# chmod 4755 /system/bin/su
# mount -o remount,ro -t rfs /dev/block/st19/system
# exit
$ adb reboot
Now your device will reboot and you can see SuperUser App in your app drawer...
----------------------------------------------------------------------
METHOD 3
There is no chance of the phone not getting rooted with my method but If you don't want to do the above methods, Try these, I'm pretty sure they will root your device with ease...
1. Framroot App [Not On Google Play]-http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2.KingoRoot App - www.kingoapp.com
3.One Click Root Free/Pro (My Favorite app, roots many devices with No-Brick Guarantee) - www.oneclickroot.com
4.Root Master App - forum.xda-developers.com/showthread.php?t=2672150
5.z4root App - http://forum.xda-developers.com/showthread.php?t=833953
6.Easy rooting toolkit App-http://forum.xda-developers.com/showthread.php?t=1321582
7.Vroot Software - http://vrootdownload.info/ or http://www.mgyun.com/en/getvroot
8.SRSRoot Software - http://www.srsroot.com
9.Unlock Root Software - http://www.unlockroot.com/download.html
10.Universal Androot App - forum.xda-developers.com/attachment.php?attachmentid=391774
ONLY FOR MTK DEVICES- MTK DROID TOOLS- http://forum.gsmhosting.com/vbb/f60...3-2014-imei-repair-rooting-tool-more-1780568/
HOPE THESE WILL DO....
Press Thanks To appreciate me to Work On Other Guides And Roms....
Your Appreciation Is Needed...
And This GUIDE IS Originally By N'ayam Amarsh'e

I have any error. Device is offline.
---------- Post added at 09:13 AM ---------- Previous post was at 09:02 AM ----------
uukasz92 said:
I have any error. Device is offline.
Click to expand...
Click to collapse
Problem solved i download another adb drivers and work fine

In /UserData/local/tmp i only have one file "directory" and nothing else. It's look like something block the data folder.

uukasz92 said:
In /UserData/local/tmp i only have one file "directory" and nothing else. It's look like something block the data folder.
Click to expand...
Click to collapse
that means you have not properly pushed the files into the directory.... Try installing adb drivers again and do the same steps...Good luck
When you open cmd just type ' adb devices' if your device gets listed then you can start if it doesn't check your drivers...

After uinstall all adb drivers and phone drivers comand prompt shows me a device code and status ofline. At the begining i install atached to therad package of adb drivers. But lately some where in Internet I find some update package of adb drivers. And there was the same sort of files like in your package. I put them there and replace and after that adb shows the device is working and status is online but your guide still does not work. Question is where is real problem ? I checked and Debug Mod is on, drivers are installed.

Try this , download android commander and try to copy the busybox , su and superuser to data/local/tmp

N'ayam Amarsh'e said:
Try this , download android commander and try to copy the busybox , su and superuser to data/local/tmp
Sent from my Mi-492 using xda app-developers app
Click to expand...
Click to collapse
I used the same files in android commander because program can't finde my device to.

Which phone you have.... Try to download its original drivers this might help...

I using Samsung Galaxy Grand Neo (GT-I9060) Jelly Bean 4.2.2
Now is working. But how to move "su" and busybox into system/bin ? Android commander says " You need root to do this." when i try to copy does files into system/bin. Folders are protected and I dont have premission to do anything with them.

uukasz92 said:
I using Samsung Galaxy Grand Neo (GT-I9060) Jelly Bean 4.2.2
Now is working. But how to move "su" and busybox into system/bin ? Android commander says " You need root to do this." when i try to copy does files into system/bin. Folders are protected and I dont have premission to do anything with them.
Click to expand...
Click to collapse
Sorry I forgot that Android Commander works only for rooted phones... Silly Me...
OK you will need to do it with Droid Explorer
OR
linux and in the linux you'll have to type 'sudo nautilus' it'll open it with root privilages...

N'ayam Amarsh'e said:
Sorry I forgot that Android Commander works only for rooted phones... Silly Me...
OK you will need to do it with Droid Explorer
OR
linux and in the linux you'll have to type 'sudo nautilus' it'll open it with root privilages...
Click to expand...
Click to collapse
And in your guide need little correct. In step 9 should be /data/local/tmp not /UserData/local/tmp. Does are two diffrent folders. And before I think I do something wrong when all files be already on right place

Droid Explorer cant change folders premission too. Command prompt says : Read-only drirectory. I don't know what to do now.

uukasz92 said:
And in your guide need little correct. In step 9 should be /data/local/tmp not /UserData/local/tmp. Does are two diffrent folders. And before I think I do something wrong when all files be already on right place
Click to expand...
Click to collapse
thanks.... Guide is updated now

Good 1 helped alot

harmeet singh said:
Good 1 helped alot
Click to expand...
Click to collapse
I am happy that I helped....

Hi! First thank you for that guide. I rooted several devices but with a noname(10.1" A10 dual core) china tablet I have some problems so I hope your solution works.
I have some problems/questions:
1. Step 5: Are you sure it's:
Code:
adb push su /data/local/tmp
instead of
adb push su /data/local/tmp[B][SIZE="5"]/[/SIZE][/B]
I'm currently not able to look at the data folder but if I change the directions e.g to /test/local/tmp it just creates a "tmp" file and overwrites the file with every push command.
2. Step 6: If it's a $ it's not rootet, what should be there if it's rooted? I have a # there. Rootchecker says it's rooted since the beginning, but I cant access with superuser/supersu etc.
3. Step 8 doesn't work. I use a virtual box with ubuntu 13.10(Stinson: new is always better?) for the first time. With "sudo nautilus" I get the message that root access is not granted(failed to register client). I used "gksudo nautilus" instead... does that matter?
4. I can't connect my device to the virtual box. I tried to add the usb device but didn't work. USB Developer Android[0223] is in virtual box connected. However, I dont know where to find it in ubuntu. I'm a ubuntu noob sorry :/
5. Is there another way to get rw permissions?
Thanks in advance :good:

thankyou for information i think is hard for me

Very nice, ty

Humbel said:
Hi! First thank you for that guide. I rooted several devices but with a noname(10.1" A10 dual core) china tablet I have some problems so I hope your solution works.
I have some problems/questions:
1. Step 5: Are you sure it's:
Code:
adb push su /data/local/tmp
instead of
adb push su /data/local/tmp[B][SIZE="5"]/[/SIZE][/B]
I'm currently not able to look at the data folder but if I change the directions e.g to /test/local/tmp it just creates a "tmp" file and overwrites the file with every push command.
2. Step 6: If it's a $ it's not rootet, what should be there if it's rooted? I have a # there. Rootchecker says it's rooted since the beginning, but I cant access with superuser/supersu etc.
3. Step 8 doesn't work. I use a virtual box with ubuntu 13.10(Stinson: new is always better?) for the first time. With "sudo nautilus" I get the message that root access is not granted(failed to register client). I used "gksudo nautilus" instead... does that matter?
4. I can't connect my device to the virtual box. I tried to add the usb device but didn't work. USB Developer Android[0223] is in virtual box connected. However, I dont know where to find it in ubuntu. I'm a ubuntu noob sorry :/
5. Is there another way to get rw permissions?
Thanks in advance :good:
Click to expand...
Click to collapse
For Your First Answer You Need not to worry /tmp and /tmp/ are the same...
2.Have you tried typing 'adb shell' then ' su ' if yes there's your solution.... If not then you have problem with su binary or busybox....
3.You have an Ubuntu 11.4 .iso file so burn it to a blank disk and boot your live disk .... It should be all right then...
4.Answer in 3....
5.Answer in 3....
6.Press Thanks if I helped...

bro im confused wt to do exactly in that sudo ... step pls give a brief explaination

[Q] Problem sideloading kodi.tv

I am having issues. The first time I tried this I thought it was a success as I went through the steps and got the loading screen on the fire tv to come up. I waited for about 10 minutes and then the firetv reset but Kodi did not install.
Now I am trying to do it and when I hit enter after the string to sideload the .apk nothing happens. I get no response in the terminal and it just goes to the next line. I cannot figure this out for the life of me.
I am using terminal on a mac. This method http://sideloadfiretv.com/sideload-apps-amazon-fire-tv-mac/
please help.

Try the additional "-r" option during install ('-r' means reinstall the app, keeping its data).
For e.g.:
Code:
adb install -r kodi.apk

Calibaan said:
Try the additional "-r" option during install ('-r' means reinstall the app, keeping its data).
For e.g.:
Code:
adb install -r kodi.apk
Click to expand...
Click to collapse
Thanks - I am brand new to mac so this is new to me. So basically my string would be
./adb install /Users/YourUserName/Desktop/-r filename.apk
?

seagood3 said:
Thanks - I am brand new to mac so this is new to me. So basically my string would be
./adb install /Users/YourUserName/Desktop/-r filename.apk
?
Click to expand...
Click to collapse
No. The option "-r" must be used before the complete path to the APK file. Have a look:
Code:
./adb install -r /Users/YourUserName/Desktop/filename.apk

Calibaan said:
No. The option "-r" must be used before the complete path to the APK file. Have a look:
Code:
./adb install -r /Users/YourUserName/Desktop/filename.apk
Click to expand...
Click to collapse
I just tried this and got the same issue where when I hit return, it just drops down to the next line. I don't understand this.

seagood3 said:
I just tried this and got the same issue where when I hit return, it just drops down to the next line. I don't understand this.
Click to expand...
Click to collapse
Couldn't you use adbfire on your mac..... it's available from this link http://forum.xda-developers.com/showthread.php?t=2786505 it might make things a little easier...

slackbladder said:
Couldn't you use adbfire on your mac..... it's available from this link http://forum.xda-developers.com/showthread.php?t=2786505 it might make things a little easier...
Click to expand...
Click to collapse
I haven't used that because I am running into all kinds of issues. First I got the "Can't create log file" error. I googled that and see that I need to drag the app onto the desktop or into the applications folder. The problem is when I try to move it I get another error message "The operation can’t be completed because you don’t have permission to access some of the items". I feel like such a newb with this Mac. I have no clue how to troubleshoot.
any help?

Any chance you have a Windows PC connected to your network that you can try? I did this (http://sideloadfiretv.com/sideload-apps-amazon-fire-tv-windows/) and had no issues.
If you can get ES File Explorer onto the FireTV, then you can go to Network/Cloud and add an account, connected it to a Dropbox account, then just download apks and open them from ES File Explorer, you won't need the PC or adb any more.

seagood3 said:
I just tried this and got the same issue where when I hit return, it just drops down to the next line. I don't understand this.
Click to expand...
Click to collapse
Can you even connect to the aTV?
Try some ADB commands to see if ADB does really work:
Code:
adb devices
This should list all via ADB connected devices. If the list is empty you´re not connected.
When your device is connected try some basic shell commands:
Code:
adb shell
This opens a bash shell. Within this shell type
Code:
ls
and the directory content of the actual folder should be listed.
ADB shell can be left with:
Code:
exit
If this isn´t working, check your ADB version you have installed and try to install a newer/other one. I had such an issue once on Windows with an Android tablet which couldn´t be connected with the ADB version I had already installed on my PC so I took another ADB version and it worked. Of course this shouldn´t be but it seems that this can happen.
Another hint might be your problems regarding adbfire. Perhaps your user restrictions prevent ADB from proper working. I´m not firm on MAC´s but I think they support the "sudo" command (explanation: http://en.wikipedia.org/wiki/Sudo). So try your ADB commands again with an additional sudo before similiar like this:
Code:
sudo adb install kodi.apk

I can't figure this out - I am following this (http://sideloadfiretv.com/sideload-apps-amazon-fire-tv-mac/) perfectly and I got it to work the first time but it just didn't complete it for some reason and now every time when I hit enter on the last step nothing happens.
I can't use the adbfire app because of the other issue.
WTF? why isn't the method through terminal working?

seagood3 said:
I can't figure this out - I am following this (http://sideloadfiretv.com/sideload-apps-amazon-fire-tv-mac/) perfectly and I got it to work the first time but it just didn't complete it for some reason and now every time when I hit enter on the last step nothing happens.
I can't use the adbfire app because of the other issue.
WTF? why isn't the method through terminal working?
Click to expand...
Click to collapse
I don't know...on mac you need to use ./ unless you configure it otherwise so to connect I'd type ./adb connect myipaddress
If you are connecting then you have adb working. I use adbfire but here's what I'd do...
I like keeping my adb folder with platform tools on my desktop. Put the apk you want to install in that folder
type "cd" <space> then drag the whole folder into the terminal--hit enter
now type ./adb connect youripaddress--hit enter
if it says connected type ./adb install<space>then drag the apk from inside your adb folder right into the terminal--hit enter
If you did it right nothing will happen instantly. It depends on how fast your connection is. Wait up to 5 minutes I'd say and you'll either get a success message of an error. If it's the latter, post it here.

Did you read my previous topic and tried what I´ve written?
Forget this Howto since it is just a general guideline and it can´t help you with your actual problem since it is more or less a first time installation guideline but you have already had a previous installation which makes the difference. It can also not deal with restrictions on your system side for e.g. if ADB wouldnt´be allowed to access USB.
If you´re sure that your system is not restricted anyway and ADB should work and if you still prefer to work only with this guideline do a factory reset within your FireTV. This should set the box in a state back again where this guideline should work how it is intended.
Or try SPMC from Amazon App Store which would be the easiest way:
http://www.amazon.com/Semperpax-SPMC/dp/B00MK49LL8