[Dec-7-2011][ROM/DEV][MAG]Pure Trib Rezound EU v1.0[HTC Vigor][Sense 3.5][Raf]

[Dec-7-2011][ROM/DEV][MAG]Pure Trib Rezound EU v1.0[HTC Vigor][Sense 3.5][Raf] - HD2 Android NAND Development

Wow this look good let's try
Sent from my Nexus One using XDA Premium App

great work i hope we have clk also anyway i will test it with Eu and see

Going to try this
Sent from my HTC Sensation XL with Beats Audio X315e using XDA App

Good work, man. Will try this today.

video
please make a video for this build.

So I will try this evening (French Time...) and see the lower recovery I can use for Eu version...

Ok ...
I did a clean Install from beginning:
Taks29, recovery 5.0.2.6, EXT4 (1024/64), after install reboot and Fix Permitions, and a few more restarts.
Free memory - 76 MB
Now:
Flash Player - works
WiFi - works
Beats - works
----------------------------
Hot Spot - make hot restart
After reboot gives me to unlock the sim more then 1 time, and after that pop up message - "com.android.process" has stopped.
I can't change the wallpaper, a can't even see them.
Camcorder - very laggy.
----------------------------
That is all for now!!!
Great work.
Thanks

It seems that there is a yet another fabulous rom!
I have a favor for you - Do you mind if you make rom with other kernels such as RCMix?
Due to Raf kernel's property, MAC address is fixed to 00:90:4C:5C:xx:xx, however, my access point doesn't accept the MAC address starts with 00.
I made a Calibration file patch, and applied with recovery, it was useless.

Cant install ..
error in /sdcardpure.Trib.Rezound.EU.MAG.1.00.605.3.v2.6.zip
(Status 0)
tried downlaoding again but same error ...

stonelessrock said:
Cant install ..
error in /sdcardpure.Trib.Rezound.EU.MAG.1.00.605.3.v2.6.zip
(Status 0)
tried downlaoding again but same error ...
Click to expand...
Click to collapse
What is the partition (1024/64 like mine) or different.
Yuo can try also with another SD.
My instalation was very fast for a Sense ...

sorceforge said:
It seems that there is a yet another fabulous rom!
I have a favor for you - Do you mind if you make rom with other kernels such as RCMix?
Due to Raf kernel's property, MAC address is fixed to 00:90:4C:5C:xx:xx, however, my access point doesn't accept the MAC address starts with 00.
I made a Calibration file patch, and applied with recovery, it was useless.
Click to expand...
Click to collapse
You can download any Mag kernel and flash it right after installing my ROM.
stonelessrock said:
Cant install ..
error in /sdcardpure.Trib.Rezound.EU.MAG.1.00.605.3.v2.6.zip
(Status 0)
tried downlaoding again but same error ...
Click to expand...
Click to collapse
Make sure that you have an ext3/4 partition at least 1024MB in size on your SD card. I have a guide on the first post.
Now if you already have the ext partition, then please try my 'Install from beginning' guide on the first post.
luba6ky said:
Ok ...
I did a clean Install from beginning:
Taks29, recovery 5.0.2.6, EXT4 (1024/64), after install reboot and Fix Permitions, and a few more restarts.
Free memory - 76 MB
Now:
Flash Player - works
WiFi - works
Beats - works
----------------------------
Hot Spot - make hot restart
After reboot gives me to unlock the sim more then 1 time, and after that pop up message - "com.android.process" has stopped.
I can't change the wallpaper, a can't even see them.
Camcorder - very laggy.
----------------------------
That is all for now!!!
Great work.
Thanks
Click to expand...
Click to collapse
Yes. The com.android.process error I get I have yet to solve.
But I've never noticed that you couldn't change the Wallpaper. When you're in the Wallpaper Selection, click the middle harware Menu key on the phone itself and select 'Grid View.'

I'm going to try this later on when I get home.
As for root access, Trib have you tried applying the Gingerbreak apk from here???
http://forum.xda-developers.com/showthread.php?t=1044765
Just a suggestion, I have used it on a test rom before
Sent from my HTC HD2 using xda premium

mexicandroid said:
I'm going to try this later on when I get home.
As for root access, Trib have you tried applying the Gingerbreak apk from here???
http://forum.xda-developers.com/showthread.php?t=1044765
Just a suggestion, I have used it on a test rom before
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
I don't have this ROM on my phone anymore. Doing some testing on other ports.
Would you be willing to test it out for me if you use my ROM?

Tribulattifather said:
I don't have this ROM on my phone anymore. Doing some testing on other ports.
Would you be willing to test it out for me if you use my ROM?
Click to expand...
Click to collapse
Sure will later on tonight
Sent from my HTC HD2 using xda premium

mexicandroid said:
Sure will later on tonight
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
I don't have any thanks left. But I will give you one tomorrow.
I've tried several root setups. None worked thus far. I hope what you've come up with works.

I install EU, MAGLDR
"Quick install"
Wifi ok after first reboot
Data 3g ok after activation (disable by defaut)
Root.......... nothing to as you write
Language pack, i can select french, but only french for US, keyboard stay english...
Free memory 112 Mo
The Recovery
CWM 8/235/10 , works
CWM 8/200/10 , fail
CWM 8/210/10, fail
CWM 8/215/10, works...
Bootanimation, nice look
The Rom looks smooth...
Next release will be great

Tribulattifather said:
You can download any Mag kernel and flash it right after installing my ROM.
Make sure that you have an ext3/4 partition at least 1024MB in size on your SD card. I have a guide on the first post.
Now if you already have the ext partition, then please try my 'Install from beginning' guide on the first post.
Yes. The com.android.process error I get I have yet to solve.
But I've never noticed that you couldn't change the Wallpaper. When you're in the Wallpaper Selection, click the middle harware Menu key on the phone itself and select 'Grid View.'
Click to expand...
Click to collapse
Yas, I know that with Grid View option, bur even like this i can't see them.
I'm gonna try to downloan new wallpaper and see if this gonna work.
---------- Post added at 11:28 PM ---------- Previous post was at 11:16 PM ----------
luba6ky said:
Yas, I know that with Grid View option, bur even like this i can't see them.
I'm gonna try to downloan new wallpaper and see if this gonna work.
Click to expand...
Click to collapse
Yas, when i download new one i can see it, but still can't see the other ones. Like they don't exist.

luba6ky said:
Yas, when i download new one i can see it, but still can't see the other ones. Like they don't exist.
Click to expand...
Click to collapse
Might be possible I forgot to resize them from xhdpi..

Tribulattifather said:
Might be possible I forgot to resize them from xhdpi..
Click to expand...
Click to collapse
It's ok, we can live with that. Keep up the good work. I know that the next version is gonna be great.

Related

New RcMix Guide/Tutorial/FAQ

Over 10,000 Views In 7 Days & Some Happy People
Image Big Thanks To Phantom Pt. II
Hi This a Guide for Users Using RcMix With issue and Problems
This is to help Robo And Other key Members having to reply & repeat to simple Question with the same answer's
Post One Is FAQ
# Frequently Question Asked And Answers
Post Three is About Flashing Hboot's/Recovery/Radio's
# which Hboot Is Recommend
# How to flash a custom Hboot For S-off / S-on Users
# How to Know which Hboot ur on
# How to Flash a Radio
# How to Flash New Recovery Still to come
[/LEFT]
Post Four Is android Tools / utilitys & UseFull Guides That members have recommended

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXx
Getting Started
Choosing A Custom Hboot/Rom & The Difference Between Stock / Cm7 Hboot
TO USE CM7/++ HBOOTS U MUST BE S-0FF
What HBOOT/ROM version do I need?
CM7 hboot can only be used with cm7/++ ONLY.
# Cm7/++ Hboot has 130 mb for system 5 mb for cache & 302 mb for data which in short means u get more space on internal memory and can sometime inprove the device
#Cm7/++ advantage version that dalvik and the rest of OS are running from nand, hence good ROM speed. cache / data can be moved manually with command in POST 2
Stock HBOOT can be used with both a2sd and x-a2sd(you HAVE to be s o-ff to use x-a2sd) versions.
# Bravo stock Hboot has 250mb for system 40mb for cache & 147mb for data which in short term means u get less space on internal memory and can sometime slow the device down
# a2sd Disadvantage: dalvik moved to sd-ext, hence user can experience some lag.
# a2sd Advantage: no need to s-off, straight flash.
# x-a2sd Disadvantage: HAVE to be s-off
# x-a2ssd Advantage: dalvik can be moved back to internal memory and you will still have reasonable amount of memory space left.
You CAN'T mix and match cm7/stock hboot/roms.
Thanks To Tinky1
xXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXx
Whats the best Sd card Setup
# It's recommended you have at least 512/1gb ext 3/4
xXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXx
Flashing A Rom
# Download Recommended HBOOT (See Post 3 how to flash Hboot) & ROM
# Flash Ur Desired Hboot
# Boot Into Recovery
# Wipe all Data or manual Wipe all data Depending on Recovery u have
# wipe cache manual
# wipe dalvik cache in advance menu
# Reboot Recovery
# Install Rom ( leave the device alone to do it Stuff )
# When Done Reboot device ( The Boot Will Take 5 - 10 Mins and Will REBOOT 3 Time Due To the SCRIPT bein Instaled )
xXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXx
Flashing A Update Version
3 choices to decide from
# Flash update over current rom with out doin anythink
# Wipe Dalvik cache and flash rom over current rom
# Do a Full wipe and start Fresh
ONLY DO A FULL WIPE IF DEV HAS RECOMMEND'S AS FRAMEWORK HAS CHANGED
xXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXx
Phone Stuck on a Continues boot loop
# Do you have the Correct Hboot ???
# Do you have the Correct Rom ???
# Do you have a working recovery as issue have been down to version of the recovery??? 2 options
1.\ Flash the recent updated version of the recovery
2.\ Change recovery and see if that fix the problem
latest version of Recovery
Ra recovery>>>> http://forum.xda-developers.com/showthread.php?t=839621
ClockworkMod >>>>http://forum.xda-developers.com/showthread.php?t=839640
# If u still cant Get the device to Boot Get a Logcat Instructions below once u got ur logcat use http://pastebin.com/ instead of pasting ur log on the forum just gives us the link of the paste bin
http://forum.samdroid.net/f38/tutorial-how-get-logcat-example-check-battery-drain-2543/
xXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXx
Moving Cache & Data 2 Sd
# Can i move Cache and Data 2 sd on a2sd/x-a2sd/Cm7/++ Version of Rom
Yes u can move both cache and data On all these types of Rom ONLY RCMIX those As he use a Script From Tkirton called Darktremor Apps2SD
PLEASE POST 2 FOR COMMANDS AND HELP
XxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXx
Genral Question
# How to fix the wifi problem? Wifi automatically turns off after a while.
Is your wifi sleep policy set to NEVER? To find out go to setting / wireless & networks /wifi settings / press menu / advanced /wifi sleep policy
XxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXx
Battery Saving Tips/Tricks
#Battery Tip 1
Type in phone *#*#4636#*#*, select Phone infromation, and then in drop down menu GSM auto (PRL). Phone prefers GSM with low WCDMA signal strength.
Thanks to Zeljko1234
xXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXx
#Battery Tip 2
Turn of Pocket mode Go to Settings / Sounds / Pocket mode
XxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXx
Issues With Apps
# Android Market Want Download My apps Keeps sayin starting Download But nothink happens
U have To start Talk , login, logout and then reload android market and try to download app again ( Repeat step intill it works )
Officail link to To this Tip/help >>>> https://www.google.com/support/androidmarket/developer/bin/answer.py?&answer=1067233
Thanks To Zeljko1234
xXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXx
# Installing / Getting Swype To Work
1. Uninstall swype and swype installer
2. Use your beta invite to re- download the installer, chose desired version and install.
3. Once installed go through all the steps installer wants you to.
4. Once all is done, click "generate license" - most likely it will retool you swype isn't licensed.
5. Do as asked by the app to generate a valid license.
6. when done correctly, you'll be back on the sign in screen. (i tried to sign in, but it wouldn't work)
7. Hit the back soft key, and launch the installer again.
8. Follow instructions, you should have working swype.
9. Enjoy.
Alternatively, you can skip the whole uninstall/install process and start from step 4. (i haven't tested if this works, can someone confirm, this will save time too
thanks to jackie_jagger
XxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXx
UOT KITCHEN HELP
Can i Flash my UOT Kitchen Framework
# Yes you can Flash your UOT Kitchen Framework As long as Dev has not changed the Framework[/COLOR
xXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXx
Cant Install UOT On X-A2SD Rom
Make your mod with UOT Kitchen, download zip, open it, extract files (SystemUI, framework...) and manually push in recovery (mount system, data...) in right location of your rom. Location could be different depends what version do you use.
Easiest way is to use QtADB >>>http://forum.xda-developers.com/showthread.php?t=683223
thanks to Zeljko1234

re doin this one

Custom Hboot that are used in Rcmix
A2SD CM7 HBOOT - cm7 hboot from alpharev.nl - the one with 130 mB for /system
- 1 gB ext2/3/4 partition
A2SD+ STOCK HBOOT - stock hboot - the one with 250 mB for /system
- 1 gB ext2/3/4 partitionXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXx
Flashing A Custom HBOOT u Need to make sure u have the correct version of the Rom
AS TRYIN TO BOOT THE DEVICE AFTER FLASHING A NEW HBOOT WILL CREATE A CONTINUES BOOTLOOP
Tools Required This is Just For S-off Users ONLY
U Need CUSTOM ANDROID DRIVERS >>>> http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
Android flasher >>>> http://forum.xda-developers.com/showthread.php?t=794638
Custom Hboot From Alpharev >>>> http://alpharev.nl/
Intalling Hboot
Make sure ur device is connected to the pc
make sure u have downloaded android flasher
Step one Download the correct File from alpharev web site Im goin to use Cm7_alpharev-cm7.img
This Process can be used to flash any Custom Hboot
step two load the android flasher
step 3 Tick hboot this will boot ur phone into fastboot and click begin Locate Ur Downloaded Hboot.img And click Ok
step 4 It will then Wipe The Old Hboot and Flash New Hboot Then It will restart ur device Your Phone will NOT boot as ur old hboot was different so load into fastboot and u will see this a pink alpharev cm7 image means it worked
Now Flash Correct Version Of Rom
Step 5 This is a paste Bin of log if ur log looks like this then it will work
http://pastebin.com/G6PVCQsP
THANKS GO TO ALPHAREV FOR THERE HBOOTS AND DANWARD FOR HIS UTILITY
XxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXx
Flashing Custom Hboot For S-On User
THIS IS A VERY LONG PROCESS I WOULD RECOMMENDING JUST S- OFF FIRST MUCH QUICKER
Follow This Guide to S-OFF
http://forum.xda-developers.com/showthread.php?t=1016084
Tools Required
Sd card / reader formatted to FAT32 u can leave ext 3/4 its works ok
Hexediter >>>http://download.cnet.com/HxD-Hex-Ed...068.html?part=dl-HxDHexEdi&subj=uo&tag=button
GoldCardTool_0.0.5 >>>> http://android.modaco.com/content/software/308798/pc-application-goldcardtool/
Goldcard.img for ur sd card >>>http://psas.revskills.de/?q=goldcard
Custom Hboot >>>> http://alpharev.nl/
DOWNLOAD ALL TOOL REQUIRED FIRST
( U MUST FORMAT UR SD CARD BEFOR U START THIS PROCESS I USE A CLEAN SD CARD )
Step One connect ur device to pc and run GoldCardTool_0.0.5 as administrator
Step 2 click on GET CID
Step 3 Copy The number in the top box
Step 4 Go to http://psas.revskills.de/?q=goldcard website and fill the info in
step 5 u will receive a email from them about 5-10 mins download the attachment
Step 6 Install The hxd editer remove sd card from phone and put it into ur card reader plug it into ur pc and load the hxd editer as administrater
Step 7 click on extras then Disk Open Then Untick open as read only select ur sd card mine is removable disk 1 and click ok
step 8 click on extra and select open disk image go to where u saved ur goldcard.img and click ok
Step 9 this is where it gets tricky go to the goldcard.img page select all and copy
step 10 go to the removable disk page and edit and paste overwrite
step 11 now go to file and save and click ok to save the changes
step 12 Now download the Hboot ur goin to use im goin to us PB99IMG_bravo_cm7 From Alpharev http://alpharev.nl/
step 13 once download the PB99IMG_bravo_cm7 Rename it (PB99IMG) and place it on to ur sd card not in any folder
step 14 Place the sd card back in Ur device and boot into recovery it will find the PB99IMG update and will ask u to update use the up button to accept and let it install ( No Pic As I dont need to Use PB99IMG u just have to trust me )
here a quick video if it look like this then u have done it wrong and must try all the process again
http://www.flickr.com/photos/[email protected]/5726235872/
if u still cant get it to work then here is a nother guide
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
Thanks Go to Alpharev For PB99IMG / Klutsh From modaco.com for his Gold card Tool / Rev Skill For making the custom Goldcard.img
XxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXxXx
How To Flash A Radio Using Android Flasher FOR S-OFF ONLY
I TAKE NO RESPONSIBILITY IF U BRICK YOUR DEVICE ONLY FLASH RADIO IF U HAVE TO
PLEASE READ GUIDE AND WATCH VIDEO LINK ON STEP 4 BEFORE STARTING
Tools Required
Android flasher >>>> http://forum.xda-developers.com/showthread.php?t=794638
Official Radio Page >>>> http://forum.xda-developers.com/showthread.php?t=687464
Other Offical Radio Page MORE UP TO DATE http://www.mofirouz.com/wordpress/2011/03/htc-desire-radios/ Thanks To Ziggy1001
Make Sure Device Is connected To Pc/Laptop
Step One Download Ur Required Radio From the link Provided And Unzip and keep it safe
Step Two Download Android Flasher & Load the Program
Step Three Click Radio then Begin Then search For the Radio.img & click ok this will boot ur device into fastboot and start to intsall
Step Four Its Know Booted Into Fastboot PLEASE DO NOT PULL USB CABLE OUT OR TOUCH THE DEVICE UNTIL IT REBOOTS ELSE U WILL BRICK DEVICE PLEASE WATCH THIS VIDEO SORRY I CANT GET MY YOUTUBE ACCOUNT WORKING
u will See on the Right there is a red bar wait till that finished and it will reboot device
VIDEO LINK >>>>>>> http://flic.kr/p/9H1YLv Sorry For Blurry Picture Crappy Blackberry Torch Camera
Thanks to Danward for Android Flasher & AdamG For Keeping Up to date with the latest radios

Android Tools/ Utility's & Usefull guides
Usefull Guide From Other People
USB brick cant connect to pc threw data connection
http://android.modaco.com/content/h...com/309939/usb-brick-rickrolled-b0rked-fixed/
Android Tools & Utilitys
Android Flasher
You can flash ( Radio , Splash Screen , Hboot , Recovery , Boot animation )
To use this Program YOU NEED TO BE S - OFF & HAVE CUSTOM ANDROID USB DRIVER FROM UNREVOKED
Android Flasher >>>> http://forum.xda-developers.com/showthread.php?t=794638
Android Usb Drivers >>>> http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
Thanks To Danward
QtADB
This is a very good all round utility i use all the time
http://forum.xda-developers.com/showthread.php?t=683223
Thanks To 7ymekk

Hi !
Very good idea. iput your thread in my sign
Thanks man
cheers

skippy68220 said:
Hi !
Very good idea. iput your thread in my sign
Thanks man
cheers
Click to expand...
Click to collapse
thanks ive got a lot to update just the process of goin threw thread seein reapeated question
if u now of any repeated question please tell n if u have a answer with it ill post it or ill try to answer my self

Hi, thanks for taking the time to do this - I've found it very helpful as a noob...

Great work man Robo is busy lately to answer all the questions on his thread!
If you need any help in any way I'm so ready for that

One question though, if I'm running something like RCMix S v1.4 A2SD for CM7 HBoot (s-off) - do I need to do the "move cache 2 sd", "move data 2 sd" part? I might be getting confused between ++ and A2SD.

You should also include that the radio needs to be updated to the latest, Flashing RIL if someone has problems with connections.

davebugyi said:
You should also include that the radio needs to be updated to the latest, Flashing RIL if someone has problems with connections.
Click to expand...
Click to collapse
i was thinking about that but the problem is i dont wana give people instruction on flashin a radio etc incase they brick device i wouldnt want to take responsibility
but i will add a link to newest radio etc

davebugyi said:
You should also include that the radio needs to be updated to the latest, Flashing RIL if someone has problems with connections.
Click to expand...
Click to collapse
There are a few fixes, ans some of them work for some people but don't for other.
I think one with most successful rate is rollback radio then flash latest one again.

pendlebum said:
One question though, if I'm running something like RCMix S v1.4 A2SD for CM7 HBoot (s-off) - do I need to do the "move cache 2 sd", "move data 2 sd" part? I might be getting confused between ++ and A2SD.
Click to expand...
Click to collapse
I have the same question.

that guide looks excellent - hope there's more for other roms that are this good in the future

daddyspud - good work on this tutorial
i want to flash the latest radio on my rcmix rom - im using 1.3.1 x-a2sd
can i flash it in recovery or do i need fastboot?
i dont see this question on your page - mayb you can add it

mayurh said:
daddyspud - good work on this tutorial
i want to flash the latest radio on my rcmix rom - im using 1.3.1 x-a2sd
can i flash it in recovery or do i need fastboot?
i dont see this question on your page - mayb you can add it
Click to expand...
Click to collapse
@daddyspud
Just tried to send a PM to you about this but couldn't send one to you!
Maybe a link to Android Flasher and or Fast boot Commander
Both very easy GUI tools to flash hboot/radio/recovery etc via Fastboot
If people want to change any of those then if they actually went to those threads D/L the tools and posted questions about changing hboot/radio/recovery there instead of in a rom thread it would help
Also maybe links to the stickies at the top of the forum they cover more or less everything

Hi
A little advice for those without flash wipe.
After the flash, use "Cache Cleaner NG" available on the Market, clear the cache every Apllication. It avoids a lot of FC.
And think about a fix permission with Rom manager.
I think these two points fixes many problems.

ziggy1001 said:
@daddyspud
Just tried to send a PM to you about this but couldn't send one to you!
Maybe a link to Android Flasher and or Fast boot Commander
Both very easy GUI tools to flash hboot/radio/recovery etc via Fastboot
If people want to change any of those then if they actually went to those threads D/L the tools and posted questions about changing hboot/radio/recovery there instead of in a rom thread it would help
Also maybe links to the stickies at the top of the forum they cover more or less everything
Click to expand...
Click to collapse
its in there ziggy but for flashing hboot lol im tryin to work around and not to make thing to confuzing
i think ill make a post for tools etc that can be used that are east to use etc

mayurh said:
daddyspud - good work on this tutorial
i want to flash the latest radio on my rcmix rom - im using 1.3.1 x-a2sd
can i flash it in recovery or do i need fastboot?
i dont see this question on your page - mayb you can add it
Click to expand...
Click to collapse
to flash a radio u need to do it in fastboot the reason ive not put anythink yet about radio is i dont want the blame if some 1 bricks there device buy usin my adivce but ill make a how to flash radio give me some time or u can us this tool
android flasher
http://forum.xda-developers.com/showthread.php?t=794638
download desired radio unzip
open the tool click radio click begin find ur radio.img and click ok the program will reboot device into fastboot and flash radio for u there will b a bar on the right hand side when it flashing
PLEASE DO NOT REMOVE USB CABLE OR PLAY WITH DEVICE ELSE U WILL POSSIBLE BRICK

[RECOVERY][Xperia S] DooMRecovery (CWM-based recovery){GB}[Rel:v05]{Dt:21/MAY}

------[ UPDATE ]-------
DooMRecovery v05 released! changelog here
------[ UPDATE ]-------
DooMRecovery for Sony Xperia S is based on ClockworkMod recovery source (GB 5.0.2.x).
Credits and special thanks to Koush and everyone else involved in Cyanogenmod project!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(the video is a bit older one from my Xperia Play but gives u an idea how it will work on device)
[ info ]
firstly i want to thank all the users of this community who donated the device to me! thanks everyone!
so friends i present to u DooMRecovery! its based on CWM 5.0.2.x sources... i have done some additions which i feel makes the recovery a lot smarter... i am still working on the recovery and will be actively maintaining it, so there will be updates as and when i get things working/add new features...
Touch capabilities are added by my teammate (Team UtterChaos) Napstar....
For posting BUGS/issues related to my kernel post them in kernel thread:
http://forum.xda-developers.com/showthread.php?t=1557452
For posting BUGS/issues related to my recovery post them in recovery thread:
http://forum.xda-developers.com/showthread.php?t=1594828
For general discussion regarding my kernel/recovery OR if u want to request for new features, post them in discussion thread:
http://forum.xda-developers.com/showthread.php?t=1596041
RECOVERY IS CURRENTLY AVAILABLE AS PART OF DooMKernel & Advanced Stock Kernel
THE RECOVERY IS STILL WORK IN PROGRESS AND I AM WORKING TO IMPROVE IT!!!
THE RECOVERY IS COMPATIBLE WITH ROM MANAGER!
Start the ROM Manager APP
Click on Menu
Select Manual Flash Override
Click OK at the next prompt
Confirm phone model as "LT26i"
Confirm version as "ClockworkMod 3.x+"
Click OK at the next prompt
thats it ROM Manager is now configured to use this recovery
[ disabled for this device ]
Advanced Menu -> Partition SDcard
[ credits / special thanks ]
Koush - for the brilliant work & coding on CWM recovery
Napstar - for doing most of the work on Touch capabilities for CWM recovery (not fully implemented it)
Frosty666 for the Vibration triggers
FreeXperia Team (Bin4ry & jerpelea) - for tooo many things!!
[ features ]
added a new menu "More Options"
AROMA File Manager is NOW directly accessible via this new menu
current ROM details can be retrieved via this new menu
fixed some internal sdcard (/emmc) related bugs
fixed advanced backup option
fixed this bug
fixed display of "build timestamp" and battery level
some more changes in font color to make it more readable
replaced background with my old favorite (thanks to Soheil)
implemented detection of internal sdcard as /emmc (if required)
slight changes in font color to make it more readable
now features larger XHDPI fonts (thanks to koush)
replaced the bottom "on-screen navigation buttons" with bigger buttons
fixed SDCARD mounting to PC as mass-storage
now recovery can backup/restore kernels and users can flash kernels (kernel.elf)
FULL TOUCH interface
swipe gesture support!!! - the hotspot for this is across full screen
swipe left to GO BACK/ Scroll UP
swipe right to Scroll Down
Honeycomb themed
haptic feedback
incase the recovery "hangs" or incase some unwanted event starts u can press the POWER button to restart the recovery (the device wont reboot, only recovery will restart)
shows current time (time when the recovery was entered/started)
shows the current battery percentage (CURRENTLY BUGGY)
uses new Roboto FONT (from latest CWM repo)
new "select update.zip menu": it will give u a new option - "show file details" - which will display the size (in bytes) and the MD5SUM of the selected file
when any update.zip is selected its complete file name will now be displayed (right at the top) and full path to that file will be printed before flashing begins
added prompt to display the "backup folder name" when user starts restoring a backup
added a warning and option to abort backup if space on sdcard is < 150 MB
removed Wipe cache partition from main menu (u can format /cache from "Mounts & Storage" menu)
removed those tons of "No"s
add confirmation to "backup" option in Nandroid menu... it used to keep getting pressed by mistake and start making backups immediately... now it will ask u before starting backup
replaced "reboot system now" with new menu "reboot options"... now with this new menu u can:
reboot sytem
reboot into recovery
reboot into fastboot mode
Power Off
added "advanced backup" menu (based on amit.bagaria implementations for his CF-Root kernel for SGS-SL)
now u can selectively choose which partitions to backup
its like a toggle
once u have finished choosing which partitions u want just click on "perform backup" and only those partitions will be backed up!!!
revamped layout for recovery menu (to improve navigation) [renamed few options and changed their order]
changed "wipe data/factory reset" option to just "factory reset", and detailed the partitions which will be wiped
changed text of most menus to fit the new honeycomb inspired design
the Nandroid backups & restore now show/displays which files were used to restore/what the backup is called (folder name)
[ known bugs ]
all backups are done get time stamp of year 1970 dont know why this happens but i am trying to sort it out some how
the recovery sometimes hangs - just press power button it will restart recovery without rebooting device
there are some graphics glitches
backups created with v01 recovery might give errors while restoring using v02 recovery... work around is posted here
if you encounter any other bugs/issues DO LET ME KNOW ASAP by posting them in THIS THREAD
[ requirements ]
UNLOCKED BOOTLOADER
fastboot binaries
[ how to install? ]
The recovery in integrated into the kernel! so when u flash the kernel it will contain the recovery!
[ how to enter recovery? ]
the recovery entry key is VOLUME UP button... so when you see the bootlogo watch out for the following notification which will tell u when u press the entry key (VOL UP):
the LED will turn BLUE
the device will vibrate for short duration
the bottom strip will be illuminated
if u press the entry key within this timeframe of the notifications (3 seconds) the device will enter into recovery
[ how to use recovery? ]
hardware keys
VOL UP/VOL DOWN key to move Up/Down in menu
HOME key to SELECT item
BACK key to GO BACK
OR
On-screen Navigation buttons
OR
Full Touch capibility!
[ donations ]
if u feel that this work has helped u OR u think that the work i put into making this is worthy of donations, then click on the following link for buying me some coffee/beer/etc
PAYPAL DONATION LINK
ENJOY!!

DooMRecovery v01 released!
details, changelog at first post!!!
DooMRecovery is currently available ONLY as a part of DooMKernel!
please test out and let me know if u have any bugs/issues in THIS THREAD...
for general discussions use the following thread:
http://forum.xda-developers.com/showthread.php?t=1596041

I have just made an very old recovery backup as it says
Current Time:
12:03:27 GMT Mon 23 Feb 1970
but it feels good to have recory backup back again, thanks.

Hi Doom,
One quick question - is it possible to disable vibration in the recovery?

harfot said:
I have just made an very old recovery backup as it says
Current Time:
12:03:27 GMT Mon 23 Feb 1970
but it feels good to have recory backup back again, thanks.
Click to expand...
Click to collapse
ya i know
its like back to the future
kazuni said:
Hi Doom,
One quick question - is it possible to disable vibration in the recovery?
Click to expand...
Click to collapse
nope i have implemented it as a feature so its easier to check if the "touch response" was registered...

@DooMLoRD
Have you considered to get your CWM based recovery actually on CWM ROM Manager?
Auto Installation would be sweet for something like this for allready rooted users. and much easier to update aswell.
Might be a consideration. I would certainly donate for that to happen. ;D

Just flashed this. Runs good, su works as expected, overclocking is good to have, but I'll probably stick to default or even underclock a bit.
Sent from my LT26i using XDA
Edit: wrong thread, derp.

How about make console runs in recovery mode? With console, we can browse and delete apps in recovery!
The OpenRecovery for Motorola Milestone has this feature!
Thank!

juzz|NOR said:
@DooMLoRD
Have you considered to get your CWM based recovery actually on CWM ROM Manager?
Auto Installation would be sweet for something like this for allready rooted users. and much easier to update aswell.
Might be a consideration. I would certainly donate for that to happen. ;D
Click to expand...
Click to collapse
we dont have dedicated recovery partition... so we cant use any app to flash it...
also only officially supported devices get official CWM from ROM Manager (its limited only to releases by Koush)...
K900 said:
Just flashed this. Runs good, su works as expected, overclocking is good to have, but I'll probably stick to default or even underclock a bit.
Sent from my LT26i using XDA
Edit: wrong thread, derp.
Click to expand...
Click to collapse
yes even i underclock to max 1Ghz
keunhuvac said:
How about make console runs in recovery mode? With console, we can browse and delete apps in recovery!
The OpenRecovery for Motorola Milestone has this feature!
Thank!
Click to expand...
Click to collapse
interesting can u share some details?
PLEASE KEEP THIS THREAD FOR REPORTING ISSUES/BUGS
FOR GENERAL DISCUSSION/FEATURE REQUEST USE THIS THREAD

DooMLoRD said:
we dont have dedicated recovery partition... so we cant use any app to flash it...
also only officially supported devices get official CWM from ROM Manager (its limited only to releases by Koush)...
Click to expand...
Click to collapse
Something I came up with the other day: maybe put the recovery fs in a separate file? Then we can change the ramdisk to either load android normally or mount the recovery image like a ramdisk and boot it. This way any kernel (as long as it supports this method) can coexist with any recovery. Also means we could probably use recovery to flash kernels because it runs from RAM so there's no risk of breaking the recovery.
Sent from my Transformer TF101 using XDA

__ delete

K900 said:
Something I came up with the other day: maybe put the recovery fs in a separate file? Then we can change the ramdisk to either load android normally or mount the recovery image like a ramdisk and boot it. This way any kernel (as long as it supports this method) can coexist with any recovery. Also means we could probably use recovery to flash kernels because it runs from RAM so there's no risk of breaking the recovery.
Sent from my Transformer TF101 using XDA
Click to expand...
Click to collapse
we already did those things for X10, ARC... point is where will u keep the recovery file? if u keep it on /system then its not a true recovery as formatting /system will remove it... and in case of "bad flash" u will be left with no access to recovery...
so we have done the next best thing... integrated recovery into kernel... we use this for all xperia devices...

If I install the recovery with ROM Manager, also install automatically the Kernel?
Are there any requirements to install it?
Thank you!!

treoking said:
If I install the recovery with ROM Manager, also install automatically the Kernel?
Are there any requirements to install it?
Thank you!!
Click to expand...
Click to collapse
installing recovery from ROM Manager is ONLY supported for devices which have dedicated recovery partition and the ones which officially supported by Koush...
only way to get recovery is to flash kernel containing recovery via fastboot

DooMLoRD said:
we already did those things for X10, ARC... point is where will u keep the recovery file? if u keep it on /system then its not a true recovery as formatting /system will remove it... and in case of "bad flash" u will be left with no access to recovery...
so we have done the next best thing... integrated recovery into kernel... we use this for all xperia devices...
Click to expand...
Click to collapse
The idea is to keep the recovery on /boot, but make it possible to run a custom image from /system.
Sent from my Transformer TF101 using XDA

K900 said:
The idea is to keep the recovery on /boot, but make it possible to run a custom image from /system.
Sent from my Transformer TF101 using XDA
Click to expand...
Click to collapse
/boot is the kernel partition, which is not accessible... so essentially its going to be in kernel ramdisk

DooMLoRD said:
/boot is the kernel partition, which is not accessible... so essentially its going to be in kernel ramdisk
Click to expand...
Click to collapse
That's what I meant. I still getting used to the Xperias' internals after three years of HTC/Samsung
Sent from my Transformer TF101 using XDA

K900 said:
That's what I meant. I still getting used to the Xperias' internals after three years of HTC/Samsung
Sent from my Transformer TF101 using XDA
Click to expand...
Click to collapse
hehe...
Xperia are a bit of a pain in the a**...
anyways u all will be happy to know that we can finally flash kernels from recovery/OS to boot partition of this device (Xperia S)...
i have tested and it works well!!

Creating a new file called .hidenandroidprogress in the clockworkmod folder should speed up the nandroid backups eg:
/sdcard/clockworkmod/.hidenandroidprogress
-smc

DooMLoRD said:
hehe...
Xperia are a bit of a pain in the a**...
anyways u all will be happy to know that we can finally flash kernels from recovery/OS to boot partition of this device (Xperia S)...
i have tested and it works well!!
Click to expand...
Click to collapse
Great news Also HTCs can sometimes be even more pain, especially locked ones
Sent from my Transformer TF101 using XDA

[ROM] CM7 - CM9 Porting for Droid Pro

Read the whole thing first. NOT MY FAULT IF YOU MESS UP SOMETHING
New Cm7 relase 6/06/2012
now it's for "every day use"!
CM7: http://www.mediafire.com/?jx7mcedrwyvfjo7
Gapps: http://cmw.22aaf3.com/gapps/gapps-gb-20110828-signed.zip
requires Root and GB update, with froyo 2.2 not work!!
1) Install Droid2 Bootstrap (http://www.mediafire.com/?g8l7vy0futbc4g5)
2) Go in to recovery mode with Bootstrap
3) Do factory reset
4) Flash the zip with Cyanogenmod 7
5) Flash Gapps file
6) Restart phone and enjoy CM7
New Cm9 relase 18/06/2012
CM9: http://www.mediafire.com/?5e3vdgif1agyiko
Gapps: http://cmw.22aaf3.com/gapps/gapps-ics-20120317-signed.zip
This is taken from the D2G forum a method to switch to GSM:
The Testing screen that is mentioned below is to open the dialer, and dial *#*#4646#*#*
"The best way to switch the network type is to enable airplane mode, head to the Testing screen, switch to CDMA auto (PRL), then disable airplane mode, and choose WCDMA preferred in the Mobile networks settings (not in the Testing menu) under Settings -> (Click More) -> Mobile Networks -> Network Mode -> Then your Network Type."
Pretty much everything except for
Tethering (Might work with a app from the Market)
Panorama Mode
Video Recorder
We even have charging while off!
Install:
requires Root and GB update, with froyo 2.2 not work!!
1) Install Droid2 Bootstrap (http://www.mediafire.com/?g8l7vy0futbc4g5)
2) Go in to recovery mode with Bootstrap
3) Do factory reset
4) Flash the zip with Cyanogenmod 9
5) Flash Gapps file
6) Restart phone and enjoy CM9
Thanks to JackpotClavin to hard work!! KEEP ALIVE THE DROID PRO :good::good:

Did It like that, but my Pro seems to be an a bootloop now. The Motorola-logo appears und disappears ...
And now?
Thx!

unfortunately the process com.android.phone has stopped
After i flashed the droid pro rom as suggested, and after restarting the phone, i keep getting this error "unfortunately the process com.android.phone has stopped"
Please help
When i switch to Aeroplane mode the error stops, but when i switch the radio on it comes back

For GSM user
ronz2000 said:
After i flashed the droid pro rom as suggested, and after restarting the phone, i keep getting this error "unfortunately the process com.android.phone has stopped"
Please help
When i switch to Aeroplane mode the error stops, but when i switch the radio on it comes back
Click to expand...
Click to collapse
for gsm user on cm9 to enable gsm:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
be quick, but you can

Very nice work.

Industrial said:
for gsm user on cm9 to enable gsm:
be quick, but you can
Click to expand...
Click to collapse
Thanks, ICS slow/ heats up my fone, i tried flashing with the CM7 update as it seems like a better build, CWM shows that the fone is flashed but wen i reboot, the fone is stuck after the red droid animation dissappears, just a blank dimly lit black screen... help, i dont wanna get back to ICS

ronz2000 said:
Thanks, ICS slow/ heats up my fone, i tried flashing with the CM7 update as it seems like a better build, CWM shows that the fone is flashed but wen i reboot, the fone is stuck after the red droid animation dissappears, just a blank dimly lit black screen... help, i dont wanna get back to ICS
Click to expand...
Click to collapse
you can try with this procedure:
enter in cwm,
wipe system
wipe data
wipe data/factory reset
wipe data/factory reset
install from zip the cm7 file
install gapps cm7
wipe data/factory reset
reboot

very nice work! now i´m on CM7 with my pro.
but got a little problem!
originaly i´ve qwertz layout but actually it´s qwerty...so i guess i´ve only to change
the keychars and keylayout...but i cant find the files for CM7...i got only for GB 2.3.4 but the names are a little bit different!
anybody an idea what i have to change or maybe working files?!
thanks in advance

Industrial said:
you can try with this procedure:
enter in cwm,
wipe system
wipe data
wipe data/factory reset
wipe data/factory reset
install from zip the cm7 file
install gapps cm7
wipe data/factory reset
reboot
Click to expand...
Click to collapse
Thanks man! You guys have been really helpful, the CM7 flash failed so i went back to CM9 and just did all of the above and also entered in CWM and in advanced i did the fix permissions and my fone works like a gem, absolutely no problems, even my battery lasts longer than it did earlier, THe fone is just amazing now, a special thanks to the dev team... you guys are the best

i fixed my problem with the different keylayout qwerty to qwertz
Steps in Root Explorer:
go to /system/usr/keylayout
open cdma_venus2-keypad.kl with "Text Editor" and change line "key 21 Y" to "key 21 Z" the same with line "key 44 Z" to "key 44 Y" go back and save it...Root Explorer automatically does a backup of the original file!
now you have to do the same in qwery.kl in this folder and save it!
at the end you need only to reboot.
does anybody know how to change the dollar symbol $ to the euro € sign...i guess i have to change something in the /keychars - folder?!
Update 30th July 2012
The steps described above aren´t a final solution because the number "6" and the symbol "_" were changed also...
in my holidays i fixed that and i solved the problem with the €-Sign as well! so now i have a final keylayout for everybody who whants to have qwertz layout!
copy the files in the attached archive in the specific folder using root explorer ore something similar and set the permissions to rw-r--r--.

how to get cyanogen mod recovery by this?
i see no step featuring the installation of that!
do i need this for cm9 from this source?
what does with -mac- mean?

so,i flashed my german phone today.
+german language
+fast as hell
-no QWERTZ layout yet
-no business encryption like in orginal rom,so only works for no corporate use.
upgrading from 2.2.2 makes really sense with this rom,but please fix the keypad layout for us germans
how can i stop apps from rotating? thx in advanced.

tragikomix said:
so,i flashed my german phone today.
+german language
+fast as hell
-no QWERTZ layout yet
-no business encryption like in orginal rom,so only works for no corporate use.
upgrading from 2.2.2 makes really sense with this rom,but please fix the keypad layout for us germans
how can i stop apps from rotating? thx in advanced.
Click to expand...
Click to collapse
you can stop apps rotating in option cyanogemod..
for quertz:
i fixed my problem with the different keylayout qwerty to qwertz
Steps in Root Explorer:
go to /system/usr/keylayout
open cdma_venus2-keypad.kl with "Text Editor" and change line "key 21 Y" to "key 21 Z" the same with line "key 44 Z" to "key 44 Y" go back and save it...Root Explorer automatically does a backup of the original file!
now you have to do the same in qwery.kl in this folder and save it!
at the end you need only to reboot.
thanks to Schallstoerer
hashtowent said:
how to get cyanogen mod recovery by this?
i see no step featuring the installation of that!
do i need this for cm9 from this source?
what does with -mac- mean?
Click to expand...
Click to collapse
MAC address fix inside it so your MAC address will not change on every reboot. If you have not done this yet, it may help with connecting to your internet as your router doesn't get clogged up giving out a new IP address every time your disconnect from wifi. In order to "activate" the MAC address fix, simply go into the terminal emulator app, typing "su" (without the quotes) then typing "mac-address-fix.sh" (without the quotes). A bunch of weird symbols should come up, but that's normal.
What this does is it auto-generates and writes your permanent MAC address to a file called called nvs_map.bin under /data/misc/wifi/nvs_map.bin. It will remain there and your MAC address will remain the same unless you wipe your /data whereas you will simply have to redo it
Watch this: http://www.droidforums.net/forum/droid-pro-roms/198354-6-18-12-cm9-ics-droid-pro.html
when the phone is at the red M logo when it's booting up, the LED will flash blue for a second. If you happen to press the volume rocker down when it's blue, it will take you to a boot menu which from there you can select Recovery -> Clockwork recovery

is there a way to use the orginal keylayout and keychar files from 2.2.2?would be the easiest way to fix the keyboard problem !

keylayout/keychars from 2.2.2 didnt work. can somebody offer the keylayout/keychar from a german pro+? maybe this is fitting....

is the batterycover needed for wifi reception?

Network Bar
I have a question...
I have flashed CM9 on my droid, and everything works fine except for the signal shows only 2 bars at all time, is there a fix for this?

i experienced this too, try setting signal in statusbar to "show in dbm" , settings, cyanogenmod, statusbar.
does the value change or is it reported wrong? - if so, its working but the signalstrange report is defective.
can't test this now, as i'm back on cm7, as phone and flash work properly there!
one question:
why can't google maps locate me using my gps, whilst "gps status" shows proper coordinates?

Would anyone know if this would work on the XPRT? Let alone any rom created for the droid pro?

i did a solution for qwertz keylayout! see on the bottom of page 1!!!

[CWM][Fastboot][CDMA/TORO] Clockworkmod Recovery 6.0.1.0

Hello Guys .. this is clockworkmod v 6.0.1.0 By Koush
Now It's The Final build
Here is what Koush said on his G+ Account
ClockworkMod Recovery 6 for Galaxy Nexus
... has been released on ROM Manager.
Changes:
New backup format that deduplicates data between backups.
Faster backups.
Fixed restores > 2GB.
Minor UI tweaks (new background, animated Android)
Future:
In the past, I have merged/rebased every CWM with AOSP. With Jellybean, I have decided this is no longer in the best interest of the project. There are only a few areas of AOSP recovery that are of interest (roots.c - file system, minui, and updater). Those will continue to be merged into CWM. Other than that, doing a full rebase with every code drop has been a giant headache, with the code churn from upstream that providing little to no value to CWM.
In any case, this unties my hands to deviate completely from AOSP, with the primary goal to make a much more polished touch UI.
ROM Manager
ROM Manager is a little over 2 years old, and though it has grown in features quite a bit since its first incarnation, parts are starting to show its age. I've been contemplating a significant UI rewrite for some time now, and will pull the trigger on that shortly. I also want to add in some features that I am hoping will be of some interest:
* A paid ROM section for devs to publish their work and support their hobby.
* Upload your current ROM to ROM Manager for anyone to use, from the device.
* Connect ROM Manager to the Recovery Builder for automatic updates of recovery. No device left behind
Speaking of the Recovery Builder; it has been pleasantly successful. To date, around 1700 recoveries have been built. Many for devices ROM Manager currently does not even support.
Anyways, if you have any suggestions for the future of ClockworkMod products, please drop me a line!.
Click to expand...
Click to collapse
Here Koush explains how the new CWM method works that makes the backup files so small in size
New ClockworkMod Backup Format
TL;DR:
Don't delete /sdcard/clockworkmod/blobs
I've gotten a few questions about how this works, so I figured I'd make a post on it.
Basically, here's what happens:
The files being backed up are hashed (sha256, not that it matters). Then it checks for a file with the name of the hash in
/sdcard/clockworkmod/blobs
So, if the hash of the file was c5273884b90d490134e7737b29a65405cea0f7bb786ca82c6337ceb24de6f5ed, it looks for /sdcard/clockworkmod/blobs/c5273884b90d490134e7737b29a65405cea0f7bb786ca82c6337ceb24de6f5ed
If the hash file is found, it continues on to the next file. Otherwise, it copies the file to the blobs directory with the file name being the hash.
ROMs and user data, for the most part, do not change too much between builds and backups. So, your APKs, system files, etc, are generally only stored once. This saves a ton of space. Especially between incremental backups.
Some of you may be thinking "well, how do I delete a backup?".
First, never delete the blobs directory. This would actually delete all your backups by rendering them unusable.
Simply delete the usual backup directory, and the next time you run a backup, all the unused hash files will be automatically delete (a process known as garbage collection). The recovery will show "Freeing space..." while this is happening.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download links
CWM v6.0.1.0
http://goo.gl/Ohcrl
Touch CWM v6.0.1.0
http://goo.gl/DKxEX
Use Fastboot Commands to Flash it
Type " Fastboot Flash Recovery recovery-clockwork-touch-6.0.1.0-toro.img
or Fastboot Flash recovery-clockwork-6.0.1.0-toro.img
I take no credits for the Recovery i'm just trying to share it with you guys it's Done by Koushik as i mentioned
The original Post on G+ : http://goo.gl/jGgl5

This is a flashable zip for the 6.0 series Touch recoveries, in case anyone wants it. Boot into recovery, install zip, choose zip, go back, go to advanced, reboot recovery, profit. I hold no responsibility if it blows up your phone, but I've tested each one before uploading. So enjoy and thanks to D3vious for the OP.
This is the Flashable zip for the 6.0.0.1 -------> http://dl.dropbox.com/u/17342655/CWM-Touch-6.0.0.1-Toro.zip
MD5 - 4acbc676039817382cab3e6338c1872f
This is the Flashable zip for the 6.0.0.4 -------> http://dl.dropbox.com/u/17342655/CWM-Touch-6.0.0.4-Toro.zip
MD5 - 4cfe0f710120c820915e37948ecc2cd2
This is the Flashable zip for the 6.0.0.5 -------> http://dl.dropbox.com/u/17342655/CWM-Touch-6.0.0.5-Toro.zip
MD5 - 026a7d86db10da65c358f1a67952bc1e

Thank you for posting this. The previous version didn't work well on my end. One press on the volume keys made the selection jump around and sometimes not even register the selection when selected and produce a black screen.
6.0.0.1 works great. I'll flash the touch when i get home.
I wish there was an app like Flash Image GUI that i used for my Evo 3d for the G-NEX. Unfortunately that's way beyond my abilities to cook up. If someone did it would be a money maker. Unless there's a way to trick Rom Manager into flashing the touch recovery
Sent from my Galaxy Nexus using Tapatalk 2

totally forgot I saw this on droid-life. Thanks for reminding me!

xavier86 said:
Thank you for posting this. The previous version didn't work well on my end. One press on the volume keys made the selection jump around and sometimes not even register the selection when selected and produce a black screen.
6.0.0.1 works great. I'll flash the touch when i get home.
I wish there was an app like Flash Image GUI that i used for my Evo 3d for the G-NEX. Unfortunately that's way beyond my abilities to cook up. If someone did it would be a money maker. Unless there's a way to trick Rom Manager into flashing the touch recovery
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Renaming it should work
Sent from my Galaxy Nexus using xda app-developers app

When in the Touch recovery when I go to reboot my device I get this screen that says:
"ROM may flash stock recovery on boot. Fix? THIS CAN NOT NE UNDONE."
The usual multiple NOs and a "YES - Disable recovery flash"
What does this mean? Do I choose yes? or keep hitting no or Go Back when I reboot?
I flashed using the CWMR Touch app which can flash IMG files
Also my background is grey not black?

Maybe I should give it a try.

destinydmm said:
When in the Touch recovery when I go to reboot my device I get this screen that says:
"ROM may flash stock recovery on boot. Fix? THIS CAN NOT NE UNDONE."
The usual multiple NOs and a "YES - Disable recovery flash"
What does this mean? Do I choose yes? or keep hitting no or Go Back when I reboot?
I flashed using the CWMR Touch app which can flash IMG files
Also my background is grey not black?
Click to expand...
Click to collapse
Background being gray is part of the change log, Koush just decided to change it is all. Its normal.
As for your other issue, I'm not sure. Mine definitely hasn't done that
Sent from my Galaxy Nexus using xda app-developers app

bill12690 said:
Background being gray is part of the change log, Koush just decided to change it is all. Its normal.
As for your other issue, I'm not sure. Mine definitely hasn't done that
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
EDIT: Refresh my memory on how to flash with flashboot commands again?? PLEASE
NEVERMIND READ THE WIKI

Saw it on Koush's G+ page don't delete the new "blobs" folder

Edit nevermind.

Works great but now when I reboot from recovery it throws up another menu and talks about stock recovery. Is this something I can delete from the recovery. I just want it to reboot with no warnings. If this is a new feature then that's fine. I am OK with it I just have never had this option and it reboots whether I click go back or yes

6.0.0.4 is out now

Khayos said:
6.0.0.4 is out now
Click to expand...
Click to collapse
Yep. Saw the announcement for the CWM update and got myself 6.0.0.4.

Where can you grab the 6.0.0.4 img file?

Any chance of a flashable 6.0.0.4? In the process of moving, don't have computer available to issue fast boot commands.
Sent from my Galaxy Nexus using xda premium

thenewguy821 said:
Any chance of a flashable 6.0.0.4? In the process of moving, don't have computer available to issue fast boot commands.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Use ROM manager

I did read somewhere you can put it on your SD card and use terminal emulator but have never done it myself. Sorry.

Is anyone else having problems backing up the blobs folder to your PC? Whether I use the Backup SD Card option in the toolkit or just try to drag and drop in Windows it fails to copy.

otaku91 said:
Is anyone else having problems backing up the blobs folder to your PC? Whether I use the Backup SD Card option in the toolkit or just try to drag and drop in Windows it fails to copy.
Click to expand...
Click to collapse
A moderator on AndroidForums said he was having issues with CWM 6.0.0.1 and restoring a NANDRIOD made with it. Has this issue been resolved with this build?

Symphony w25 / ktouch w650 / mobistar s01 / karbonn a7 ICS Upgrade tutorial.

Always remember to BACKUP your SYSTEMs NANDROID BACKUP with CWM. * I am really not responsible for any damage to your phone; it’s all upon your responsibility. *Let me know if any edit is recommended by you.
Full tutorial is also available on my blog : iamrainwalker
Ahh! I love my ICS rom and my symphony w25. I am a perfectionist, so I took my time to study and gone throw lots of trials and errors to finalize the ICS rom. Thanks to all those Brilliant senior developers from XDA for their numerous helps and tips. I will start by providing some screenshot of the ICS rom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Beautiful isn’t it? Now let’s start. Just make sure you read and follow everything I say from now. Upgrading process is divided in 3 steps actually:
Updating Baseband
Flashing AP(Factory) ROM
Flashing Finalized NANDROID ROM.
YOU MUST FOLLOW ALL STEPS ONE BY ONE, DO NOT DO ANYTHING YOU DON’T KNOW, IF YOU ARE A TOTAL NEWBIE, THIS IS NOT FOR YOU KIDDO. DON’T BLAIM ME FOR YOUR MISTAKES.
ICS_Stable_sw25_rom Featurs :
Fully Rooted
Updated SU and Busybox binaries
Init.d Support, busybox runpart
App2SD enabled
Super Fast
All Sensors working
Better Battery Life
Better Network Reception
ALL new Jelly Bean keyboard
Cracked PowerAmp Music Player
Added
And many other tweaks I can’t remember right now.
* Points to be noted
You need to enable or disable Gsensor from Settings > Display by your self, Status ber shortcut don’t work.
You need to set APN manually from Settings > More > Mobile Networks > Select Subscription > Manage Card
System is already configured for Bangladeshi Users.
Download all Files Listed below :
AP_BP_FOR_ICS_S01
o (AP+BP)_ICS_S01.7z.001 – http://www.mediafire.com/?5v5qkcd4viag8vi
o (AP+BP)_ICS_S01.7z.002 – http://www.mediafire.com/?mahtazx3jrbprtr
ASDK_Files
o installer_r20.0.3-windows.exe – http://www.mediafire.com/?p57ix4v80c3yf8f
o jdk-7-windows-i586.exe – http://www.mediafire.com/?rejrjk6rjjbq5d9
Drivers
o S01_Drivers.7z – http://www.mediafire.com/?wjhalczqtg7k1c1
S01_Flash_tools
o S01_flash_tools.7z – http://www.mediafire.com/?6mzx0bqrd6oubo7
Symphony_ICS_stable_1
o clockworkmod_rainwalker.7z.001 – http://www.mediafire.com/?uzw25cq5bk1omn4
o clockworkmod_rainwalker.7z.002 – http://www.mediafire.com/?242vkhkfi3noekc
CWM for S01
o CWM-English.rar – http://www.mediafire.com/?y0e31h55qurp3y7
7zip
o http://www.7-zip.org/
File Extraction :
Download all files in a folder like this location “F:\sym_ics\SYMICS4\”
Select files like this photo and Use 7zip to Extract.
Make use you have folders Extracted like this
Updating Baseband :
This process is pretty nasty. I made a successful Update after trying a number of times and fails, after that I installed WINDOWS XP SP3 and successfully Updated Baseband. So I would recommend you guys to Start this Upgrading Process with a Freshly Installed Windows XP. I will try to give you as much as possible visual guide.
*It is not mandatory to install Android SDK and Java Runtime.
Install “jdk-7-windows-i586.exe”
Install “installer_r20.0.3-windows.exe” , make sure you have selected options red marked in this photo when Android SDK download files.
After download complete, Go to “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01” This folder.
Extract “NPRG7627A.zip” by right clicking it 7-zip > Extract Here
Copy “NPRG7627A.hex” to “591357_8376_WCDMA_V0005” folder.
Switch off your phone, remove battery, SIM cards, SD card.
Place battery on your phone, Hold POWER BUTTON+VOLUME DOWN BUTTON together, you will see “QPST Entry Download”.
Now, Connect your phone to your pc.
You will see a popup like this, cancel it.
Go to your device manager and follow the procedure below :
For you the driver location will be “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\HK11-VB717-27\HK11-VB717-27_1.0.56\Win32\x86\free”, Click Ok, and press Next. Driver will be installed. Close it. Go to device manager and you will see something like this :
In my case i got COM3, you may have diffrent port number. Now go to “F:\sym_ics\SYMICS4\S01_flash_tools\fast_boot” and Open “fastboot1.0.2.4.exe”. You will see something like this :
Click on “BP Browse” select folder “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01\591357_8376_WCDMA_V0005″, Put the port number on “BP Port”, take a deep breath and press Download, download should start if everthing is allright, after download compleate “fastboot1.0.2.4.exe” will close by itself. and you need to pull your phone bettery to shut it down and disconnect the phone form your pc.
AP Upload :
Place your phone battery on the phone, press POWER BUTTON + VOLUME UP and wait untill you see a GREEN display on your phone.
Connect you phone and you will see a new Device is found named Android, now install the drivers by following procedure like prevoiusly shown and use the folder “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\adb_driver” for drivers.
After driver instlation compleate, go to “F:\sym_ics\SYMICS4\S01_flash_tools\EMMC_AP” and open “QUALFAST2.0.4(Factory).exe”
Click on “SEL PATH” button and select “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01\TBW591357_9999_V0001_2″ folder click ok. you will see :
Now press “OK” and wait for first “Waiting Decices…” to compleate and then disconnect the phone, pull your battery and start your phone. ICS should start with creepy forign language.
Flashing Finalized Stable NANDROID ROM :
Default firmware rom do not come with CWM installed as recovery, so we need to port it now. This is a pretty simple procedure.
Download CWM-English.rar from This link : http://www.mediafire.com/?y0e31h55qurp3y7
Copy it to “F:\sym_ics\SYMICS4\”
Extract using 7-zip > Extract Here.
Shutdown your phone, insert your sim and sd card. Press POWER BUTTON + VOLUME UP button till the GREEN display appears.
Connect your phone with the pc.
Open Command prompt and type :cd F:\sym_ics\SYMICS4\CWM-English (press enter)Fastboot devices (press enter)
You should see something like “???????????? fastboot” Now type :fastboot boot recovery-english.img (press enter)
Wait sometime, CWM recovery should boot.
Now, from the menu, Select “wipe data/factory reset”
After finishing slect “wipe cache partition”
After that, go to “mount & Storage” > “Mount Usb Drive”
Now sd card will be mounted on your pc. Copy “F:\sym_ics\SYMICS4\clockworkmod_rainwalker\ clockworkmod” to your sd card.
Select “Unmount” from your phone. And Select “Go back”
Select “Backup and Restore”
Select “Restore”
Select “ICS_W25_Stable” and confirm, wait for restore to complete, then reboot.
Yah! You are now on ISC stable. Enjoy.
Helpful Links :
Driver Installation Video : https://vimeo.com/55837968
Another Baseband Update Guide : http://forum.xda-developers.com/showthread.php?t=2036053
XDA foram Thread : http://forum.xda-developers.com/showthread.php?t=1788936
Rooting Symphony w25 : http://forum.xda-developers.com/showthread.php?t=1818146
Thanks From the deepest corner of my heart to :
prasad12ka4 , ahmed.zunaid , vinodkbishnoi (for poviding stability of the rom) & all tose person who helped me for this achivement

rainwalker said:
Always remember to BACKUP your SYSTEMs NANDROID BACKUP with CWM. * I am really not responsible for any damage to your phone; it’s all upon your responsibility. *Let me know if any edit is recommended by you.
Full tutorial is also available on my blog : iamrainwalker
Ahh! I love my ICS rom and my symphony w25. I am a perfectionist, so I took my time to study and gone throw lots of trials and errors to finalize the ICS rom. Thanks to all those Brilliant senior developers from XDA for their numerous helps and tips. I will start by providing some screenshot of the ICS rom.
Beautiful isn’t it? Now let’s start. Just make sure you read and follow everything I say from now. Upgrading process is divided in 3 steps actually:
Updating Baseband
Flashing AP(Factory) ROM
Flashing Finalized NANDROID ROM.
YOU MUST FOLLOW ALL STEPS ONE BY ONE, DO NOT DO ANYTHING YOU DON’T KNOW, IF YOU ARE A TOTAL NEWBIE, THIS IS NOT FOR YOU KIDDO. DON’T BLAIM ME FOR YOUR MISTAKES.
ICS_Stable_sw25_rom Featurs :
Fully Rooted
Updated SU and Busybox binaries
Init.d Support, busybox runpart
App2SD enabled
Super Fast
All Sensors working
Better Battery Life
Better Network Reception
ALL new Jelly Bean keyboard
Cracked PowerAmp Music Player
Added
And many other tweaks I can’t remember right now.
* Points to be noted
You need to enable or disable Gsensor from Settings > Display by your self, Status ber shortcut don’t work.
You need to set APN manually from Settings > More > Mobile Networks > Select Subscription > Manage Card
System is already configured for Bangladeshi Users.
Download all Files Listed below :
AP_BP_FOR_ICS_S01
o (AP+BP)_ICS_S01.7z.001 – http://www.mediafire.com/?5v5qkcd4viag8vi
o (AP+BP)_ICS_S01.7z.002 – http://www.mediafire.com/?mahtazx3jrbprtr
ASDK_Files
o installer_r20.0.3-windows.exe – http://www.mediafire.com/?p57ix4v80c3yf8f
o jdk-7-windows-i586.exe – http://www.mediafire.com/?rejrjk6rjjbq5d9
Drivers
o S01_Drivers.7z – http://www.mediafire.com/?wjhalczqtg7k1c1
S01_Flash_tools
o S01_flash_tools.7z – http://www.mediafire.com/?6mzx0bqrd6oubo7
Symphony_ICS_stable_1
o clockworkmod_rainwalker.7z.001 – http://www.mediafire.com/?uzw25cq5bk1omn4
o clockworkmod_rainwalker.7z.002 – http://www.mediafire.com/?242vkhkfi3noekc
CWM for S01
o CWM-English.rar – http://www.mediafire.com/?y0e31h55qurp3y7
7zip
o http://www.7-zip.org/
File Extraction :
Download all files in a folder like this location “F:\sym_ics\SYMICS4\”
Select files like this photo and Use 7zip to Extract.
Make use you have folders Extracted like this
Updating Baseband :
This process is pretty nasty. I made a successful Update after trying a number of times and fails, after that I installed WINDOWS XP SP3 and successfully Updated Baseband. So I would recommend you guys to Start this Upgrading Process with a Freshly Installed Windows XP. I will try to give you as much as possible visual guide.
*It is not mandatory to install Android SDK and Java Runtime.
Install “jdk-7-windows-i586.exe”
Install “installer_r20.0.3-windows.exe” , make sure you have selected options red marked in this photo when Android SDK download files.
After download complete, Go to “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01” This folder.
Extract “NPRG7627A.zip” by right clicking it 7-zip > Extract Here
Copy “NPRG7627A.hex” to “591357_8376_WCDMA_V0005” folder.
Switch off your phone, remove battery, SIM cards, SD card.
Place battery on your phone, Hold POWER BUTTON+VOLUME DOWN BUTTON together, you will see “QPST Entry Download”.
Now, Connect your phone to your pc.
You will see a popup like this, cancel it.
Go to your device manager and follow the procedure below :
For you the driver location will be “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\HK11-VB717-27\HK11-VB717-27_1.0.56\Win32\x86\free”, Click Ok, and press Next. Driver will be installed. Close it. Go to device manager and you will see something like this :
In my case i got COM3, you may have diffrent port number. Now go to “F:\sym_ics\SYMICS4\S01_flash_tools\fast_boot” and Open “fastboot1.0.2.4.exe”. You will see something like this :
Click on “BP Browse” select folder “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01\591357_8376_WCDMA_V0005″, Put the port number on “BP Port”, take a deep breath and press Download, download should start if everthing is allright, after download compleate “fastboot1.0.2.4.exe” will close by itself. and you need to pull your phone bettery to shut it down and disconnect the phone form your pc.
AP Upload :
Place your phone battery on the phone, press POWER BUTTON + VOLUME UP and wait untill you see a GREEN display on your phone.
Connect you phone and you will see a new Device is found named Android, now install the drivers by following procedure like prevoiusly shown and use the folder “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\adb_driver” for drivers.
After driver instlation compleate, go to “F:\sym_ics\SYMICS4\S01_flash_tools\EMMC_AP” and open “QUALFAST2.0.4(Factory).exe”
Click on “SEL PATH” button and select “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01\TBW591357_9999_V0001_2″ folder click ok. you will see :
Now press “OK” and wait for first “Waiting Decices…” to compleate and then disconnect the phone, pull your battery and start your phone. ICS should start with creepy forign language.
Flashing Finalized Stable NANDROID ROM :
Default firmware rom do not come with CWM installed as recovery, so we need to port it now. This is a pretty simple procedure.
Download CWM-English.rar from This link : http://www.mediafire.com/?y0e31h55qurp3y7
Copy it to “F:\sym_ics\SYMICS4\”
Extract using 7-zip > Extract Here.
Shutdown your phone, insert your sim and sd card. Press POWER BUTTON + VOLUME UP button till the GREEN display appears.
Connect your phone with the pc.
Open Command prompt and type :cd F:\sym_ics\SYMICS4\CWM-English (press enter)Fastboot devices (press enter)
You should see something like “???????????? fastboot” Now type :fastboot boot recovery-english.img (press enter)
Wait sometime, CWM recovery should boot.
Now, from the menu, Select “wipe data/factory reset”
After finishing slect “wipe cache partition”
After that, go to “mount & Storage” > “Mount Usb Drive”
Now sd card will be mounted on your pc. Copy “F:\sym_ics\SYMICS4\clockworkmod_rainwalker\ clockworkmod” to your sd card.
Select “Unmount” from your phone. And Select “Go back”
Select “Backup and Restore”
Select “Restore”
Select “ICS_W25_Stable” and confirm, wait for restore to complete, then reboot.
Yah! You are now on ISC stable. Enjoy.
Helpful Links :
Driver Installation Video : https://vimeo.com/55837968
Another Baseband Update Guide : http://forum.xda-developers.com/showthread.php?t=2036053
XDA foram Thread : http://forum.xda-developers.com/showthread.php?t=1788936
Rooting Symphony w25 : http://forum.xda-developers.com/showthread.php?t=1818146
Thanks From the deepest corner of my heart to :
prasad12ka4 , ahmed.zunaid , vinodkbishnoi (for poviding stability of the rom) & all tose person who helped me for this achivement
Click to expand...
Click to collapse
Thx for your hardwork but plz remove power amp
Its a paid app and adding it into a rom is against forum rules.
You may banned for this if moderator would see.
Sent from my Spice Mi-355 using xda app-developers app

rjunraj said:
Thx for your hardwork but plz remove power amp
Its a paid app and adding it into a rom is against forum rules.
You may banned for this if moderator would see.
Sent from my Spice Mi-355 using xda app-developers app
Click to expand...
Click to collapse
Thank you for letting me know, i will remember this at my next releases.

splash.img - change
Hello Rainwalker, Thank you for this thread, I have updated ICS in my W25. But I want to know, Is there any chance to replace/change "Mobistar" boot splash image. if would please let us know. thanks again for you hard work.

raj_onu said:
Hello Rainwalker, Thank you for this thread, I have updated ICS in my W25. But I want to know, Is there any chance to replace/change "Mobistar" boot splash image. if would please let us know. thanks again for you hard work.
Click to expand...
Click to collapse
Yes, it is possible, my new rom will have a new splash image. i will post a procedure about changing spalsh image soon.

rainwalker said:
Yes, it is possible, my new rom will have a new splash image. i will post a procedure about changing spalsh image soon.
Click to expand...
Click to collapse
Thanks, I will be waiting for that..

I have a big problem in this part:
Now press “OK” and wait for first “Waiting Decices…” to compleate and then disconnect the phone, pull your battery and start your phone. ICS should start with creepy forign language.
something go wrong and dont complete the action so the result is now even if a try start from dyhe begin dont work now give error im step to download....and can do anything more...
Can you help me please...
Thanks
I already try to get in bootloader green screen and after red to put a normal rom but broken in red dont go more than that....

sfmteixeira said:
I have a big problem in this part:
Now press “OK” and wait for first “Waiting Decices…” to compleate and then disconnect the phone, pull your battery and start your phone. ICS should start with creepy forign language.
something go wrong and dont complete the action so the result is now even if a try start from dyhe begin dont work now give error im step to download....and can do anything more...
Can you help me please...
Thanks
I already try to get in bootloader green screen and after red to put a normal rom but broken in red dont go more than that....
Click to expand...
Click to collapse
It would be great if you can send me a screenshot. i need to know what error exactly occurs? and what os do you use?

Problem starts here
Connect you phone and you will see a new Device is found named Android, now install the drivers by following procedure like prevoiusly shown and use the folder “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\adb _driver” for drivers.
After driver instlation compleate, go to “F:\sym_ics\SYMICS4\S01_flash_tools\EMMC_AP” and open “QUALFAST2.0.4(Factory).exe”
The device says is not possible to install before i even put the drivers dont reconice any android device and than in the upload starts ok but in the firt step of getting device give error.
After that i try make all again but dont be able to make download and nothing more in the steps you said.
Sorry and thanks for help

sfmteixeira said:
Problem starts here
Connect you phone and you will see a new Device is found named Android, now install the drivers by following procedure like prevoiusly shown and use the folder “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\adb _driver” for drivers.
After driver instlation compleate, go to “F:\sym_ics\SYMICS4\S01_flash_tools\EMMC_AP” and open “QUALFAST2.0.4(Factory).exe”
The device says is not possible to install before i even put the drivers dont reconice any android device and than in the upload starts ok but in the firt step of getting device give error.
After that i try make all again but dont be able to make download and nothing more in the steps you said.
Sorry and thanks for help
Click to expand...
Click to collapse
which operating system do you use? did your BP download was successful? try rebooting your computer the get into fastboot mod on your phone, connect your phone to computer, if you don't see anything then go and see in device manager, if you see there are some yellow unrecognized devices then install them.

I use seven! If i enter in fastboot (green) apear unkow device only and i already try the drivers you oput but nothing happen! I have another pc with 8 do you think if a do all steps can result?
---------- Post added at 05:15 AM ---------- Previous post was at 05:08 AM ----------
If a tur on my phone normaly apearce your logo and stay stock....but the pc recognice as Android as Android composite ADB Interface....

Finally i was able in other pc but there is a problem!
This part i cant do it
Flashing Finalized Stable NANDROID ROM :
Default firmware rom do not come with CWM installed as recovery, so we need to port it now. This is a pretty simple procedure.
Download CWM-English.rar from This link : http://www.mediafire.com/?y0e31h55qurp3y7
Copy it to “F:\sym_ics\SYMICS4\”
Extract using 7-zip > Extract Here.
Shutdown your phone, insert your sim and sd card. Press POWER BUTTON + VOLUME UP button till the GREEN display appears.
Connect your phone with the pc.
Open Command prompt and type :cd F:\sym_ics\SYMICS4\CWM-English (press enter)Fastboot devices (press enter)
You should see something like “???????????? fastboot” Now type :fastboot boot recovery-english.img (press enter)
Wait sometime, CWM recovery should boot.
Now, from the menu, Select “wipe data/factory reset”
After finishing slect “wipe cache partition”
After that, go to “mount & Storage” > “Mount Usb Drive”
Now sd card will be mounted on your pc. Copy “F:\sym_ics\SYMICS4\clockworkmod_rainwalker\ clockworkmod” to your sd card.
Select “Unmount” from your phone. And Select “Go back”
Select “Backup and Restore”
Select “Restore”
Select “ICS_W25_Stable” and confirm, wait for restore to complete, then reboot.
Yah! You are now on ISC stable. Enjoy.
How can i do for have root and make the recovery you said to have a stable ICS?
Because im not superuser, i dont have portuguese language and im not able to configure the apn for have internet in the phone!
Sorry again but if you can help!
Thanks a lot
Regards

you dont need to be a superuser to flah cwm. flash cwm by following the procedure i have wrote. then flash the clockworkmod file. u just need to flash cwm. i have already posted my new update on this rom. see my blogs latest post.
Sent from my Symphony W25

rainwalker said:
you dont need to be a superuser to flah cwm. flash cwm by following the procedure i have wrote. then flash the clockworkmod file. u just need to flash cwm. i have already posted my new update on this rom. see my blogs latest post.
Sent from my Symphony W25
Click to expand...
Click to collapse
I already try do step by step all you said...but the last i was not able so i do this:
Install room manager and make Select “Restore”
Select “ICS_W25_Stable and all ok!
But i still with same problems:
Only English language dont have portugese
And the CWM recovery i think is with problems:
Because dont have all the things
Apearce like this:
Android system recovery (3e)
rebbot system now
apply update from external store
wipe data/factory reset
wipe cache partition
apply update from cache
and no more funcions as you show in your images
I think some goes wrong in this part thats why i can put any more rom
Sorry again but please help me

sfmteixeira said:
I already try do step by step all you said...but the last i was not able so i do this:
Install room manager and make Select “Restore”
Select “ICS_W25_Stable and all ok!
But i still with same problems:
Only English language dont have portugese
And the CWM recovery i think is with problems:
Because dont have all the things
Apearce like this:
Android system recovery (3e)
rebbot system now
apply update from external store
wipe data/factory reset
wipe cache partition
apply update from cache
and no more funcions as you show in your images
I think some goes wrong in this part thats why i can put any more rom
Sorry again but please help me
Click to expand...
Click to collapse
CWM is Clockworkmod Recovery, it's a recovery replacement of stock recovery. the procedure is told is how to install CWM by replacing Stock recovery, if you have successfully flashed "ICS_W25_Stable" you already should have CWM on your system. try by pressing VOL UP + Power and hold untill Red display showes up. I am sorry i can't help you with Language support. But if you don't install CWM on your system then you wont be able to update new roms.

rainwalker said:
CWM is Clockworkmod Recovery, it's a recovery replacement of stock recovery. the procedure is told is how to install CWM by replacing Stock recovery, if you have successfully flashed "ICS_W25_Stable" you already should have CWM on your system. try by pressing VOL UP + Power and hold untill Red display showes up. I am sorry i can't help you with Language support. But if you don't install CWM on your system then you wont be able to update new roms.
Click to expand...
Click to collapse
I do all steps you said all goes ok! Only the step to make download in flash starts and then gives error, but after all steps ok! Bur the recovery stills the same the normal recovery with 5 option i said before!
The only way i put the "ICS_W25_Stable" it was from the rom manager i installed...
I dont understand what is happen...

Sd card space running out
hi,
i did everything like you posted.
using the rom since 3-4 days.
i have some issues.
1) internal memory is always low.i do not have anyrhing installed .(21 mb free)
2) when i try to download an app from play store,it says that sd cars apace running out and the download fails.
3) i have link2sd and 1gb ext2 partiotin in sd card. total sd size is 8 gb. 1.2 gb is empty at the moment.
pls give me a solution for this.
i really like the rom.
great battery performance.
if you could help me with the memory issue,then it will be awesome.
thanx

Pritesh.mohan said:
hi,
i did everything like you posted.
using the rom since 3-4 days.
i have some issues.
1) internal memory is always low.i do not have anyrhing installed .(21 mb free)
2) when i try to download an app from play store,it says that sd cars apace running out and the download fails.
3) i have link2sd and 1gb ext2 partiotin in sd card. total sd size is 8 gb. 1.2 gb is empty at the moment.
pls give me a solution for this.
i really like the rom.
great battery performance.
if you could help me with the memory issue,then it will be awesome.
thanx
Click to expand...
Click to collapse
Reset To factory settings, then start using link2sd. internal memory shows low because of preinstalled apps. you can use my 3rd updated rom "OPSHORA". this one is best. i personally use this rom. but you need to follow all procedures step by step. but you don't need to update Baseband again. OPSHORA rom has some Blue screen issue sometime, but removeing your battery will fix it.

Headphone Sound Problem
Hi Rainwalker, I have an problem with headphone sound. When I playing a song, normally it's ok but, after plugin headphone, headphone sound is too poor. Please help me out of this issue.

raj_onu said:
Hi Rainwalker, I have an problem with headphone sound. When I playing a song, normally it's ok but, after plugin headphone, headphone sound is too poor. Please help me out of this issue.
Click to expand...
Click to collapse
which music application do you use? chk sound settings, and equalizer settings.

Develop Bugs

welcome