Hiya, I got a BT800 for Christmas from my lovely wife and am having a hell of a time getting it to activate voice dialling!
Having paired it and chosen to use it as the hands free device, I can use it for phone calls that I start from the phone, but the Exec doesn't do anything when I 'tap' the answer button (one beep) or squeeze it(beep, pause, beep).
I've even just restored the original rom (hard-reset, basic install) and it still doesn't do anything...
Did anyone else have this problem? Is there a stage I'm missing out?
Hope someone can help, I've a nasty feeling it's too late to return it to Amazon...
Might be a daft question, but have you added your voice tags (or re-added after hard reset)?
Thanks for the reply, I was never intending to use voice speed dial (preferring voice command by miles) and so didn't record any tags. Even without any, you should still get the app launching and a message that there aren't any tags recorded. My problem was that I wasn't even getting that.
I can't claim to have solved the problem, but at least I no longer have it! I reinstalled the original O2 ext_rom and did a nice clean "Basic" install then put my customised ext_rom back and reset again. Having paired the headset I was able to launch voice speed dial from it, so went ahead and installed voice command, made the registry change to launch VC from the headset and am laughing.
I wish I knew what had caused the problem so I could avoid doing it again! I suspect that it was an attempt to restore my bluetooth registry settings on a rebuild that was the cause... Certainly I didn't try to set it up automatically the second time round and it *did* work, but there are too many variables to be sure.
HTH someone!
The Universal has no NATIVE support for Voice Dial using Voice Command. You have to do the following so it will work via VOICE COMMAND as it has to bypass the Installed Vocie software:
Install Voice Command to the default location.
Fire up a registry editor
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Modify the string marked "path" from the default \Windows\SDDialer.exe to \Program Files\Voice Command\VoiceCMD.exe
This should now launch Voice Command
Maybe you made a mistake like missing a letter?
If you have done the above and it still doesnt work, then i'm just as lost as you are
sorry, browser problem, message was posted twice
I'm using the BT800 with my Qtek 9000 (Original ROM) and don't have any problems with voice dialing. After pressing the button on the Jabra within a second or 2 the voice dialing application is started, I hear a start sound, speak the name and it automatically starts dialing.
I have installed the latest BT800 firmware (becaus of the international dialing bug) and had not tested this functionality with the original firmware. Which firmware are you using?
MvanIperen said:
I'm using the BT800 with my Qtek 9000 (Original ROM) and don't have any problems with voice dialing. After pressing the button on the Jabra within a second or 2 the voice dialing application is started, I hear a start sound, speak the name and it automatically starts dialing.
I have installed the latest BT800 firmware (becaus of the international dialing bug) and had not tested this functionality with the original firmware. Which firmware are you using?
Click to expand...
Click to collapse
Which button do you have to press to activate the voice dial? The left or the right button under the LCD? Is it Tap or Hold, the button i mean?
@jorgee: 1st post - thanks, that's what I meant earlier when I said I'd done the reg fix and it all worked
2nd post - to activate voice dialling on a UK O2 Exec, you press the 2nd button from the left on the front of the device - next to the camera button.
@ MvanIperen, I'm using the latest BT800 firmware too, when I did a couple of rebuilds, the problem went away and it now behaves as you describe.
@ all, thanks for the replies! It was just me after all! Mental note: Mess with the registry at your peril!
[quote="this_mike
2nd post - to activate voice dialling on a UK O2 Exec, you press the 2nd button from the left on the front of the device - next to the camera button.
[/quote]
I meant is there anyway to activate voice dial from the headset? Can i only activate it by pressing the voice command button? I mean lets say my phone's in my drawer and i have the BT800, do i have to pull out the phone to be able to use the voice dial?
Jorgee said:
I meant is there anyway to activate voice dial from the headset? Can i only activate it by pressing the voice command button? I mean lets say my phone's in my drawer and i have the BT800, do i have to pull out the phone to be able to use the voice dial?
Click to expand...
Click to collapse
Maybe I misunderstand what you're asking.
You posted the registry change to make this work higher up the page.
Pressing the answer button on the headset does fire up Voice Command but only if the display is open or in portrait mode. If it's closed in your pocket protecting the screen then it won't work
I've never installed voice command, i was talking about the built in voice dial application. If the QTEK is in my pocket, and i want to call someone, which button on the headset/BT800 do i press to activate voice dial? And is it push or push and hold? Do i ghet any kind of audible warning telling me i can start speaking the voice tag?
I hope this time i am a bit clearer, sorry for the previous confusing post.
Jorgee said:
I've never installed voice command, i was talking about the built in voice dial application. If the QTEK is in my pocket, and i want to call someone, which button on the headset/BT800 do i press to activate voice dial? And is it push or push and hold? Do i ghet any kind of audible warning telling me i can start speaking the voice tag?
I hope this time i am a bit clearer, sorry for the previous confusing post.
Click to expand...
Click to collapse
On the BT800:
- To activate voice dialling (whether using MS Voice Command or the 'standard' voice dialling app) using a BT800 headset, press briefly the button nearest the headset microphone.
- To redial from the headset the last number dialled, press and HOLD the button nearest the headset microphone.
This works for me whatever situation the Exec is in: open, closed, portrait, landscape. I'm using the default voice-dialling software, not the MS one. Hope this helps.
Thanks SiliconS,
That was the answer i was looking for, sorry i had to bother you guys instead of reading the manual as my manual is in Spanish and i am only a beginner-intermediate level reader.
Again THANKS!!!! Very appreciated
Are any of you folks running WM2003SE? See, I was able to make that registry change and do a soft reset and have Voice Command working through the BT headset on my old machine, but it was running WM2003 (not the second edition version). From what I have read, SE doesn't seem to like that registry change, as when you make it, all that will happen is the connection opens when you tap the button on the HS, but the ability to use VC is not there.
I know there must be some way to do this. Any opinions or suggestions would be fab!
Thanks much!
I have TyTN with Windows Mobile 6.1 - thistime without integrated voice dial with headset (supporting A2DP and AVRCP) Therefore I have installed 3rd party app for voice dial. (VITO VoiceDialer)
But unfortunatly the button on headset for speed dial is not working. (other buttons like music forward/backward, redial last number are working)
Is there any way to hook the headset-button or emulate it as HW button on device. Such as Button 1, Button 2 etc.? Or assign default voice dial application?
Thank you for any tip
still not solved
I have found tutorial for eten, but not working on my tytn, rly weird
http://www.etenblog.com/2008/02/21/add-bluetooth-headset-button/
So I got a G2 and am now stuck trying to figure out how to trigger the Voice Actions application with a press of my headset button instead of the crappy Voice Dialer application. Phone is brand new and non-rooted. Should I be rooting this thing and removing the Voice Dialer or what? Pain in the butt to have to long-press the Search to trigger the better of the two programs.
Seconded; I'd love to be able to do this, along with maybe setting which media app to launch with an A2DP 'play' signal if nothing is running. At the moment it's a bit of a toss-up (and occasionally two start up at the same time, with different tracks playing).
Greetings:
I use Motorola HX550 bluetooth headset with vlingo to place call and navigation. This method never wakes the phone up to perform these functions. In fact, I have to manually push the power/wake button on the phone then push the headset call button to launch voice talk. Is there any setting I can do to use the headset call button to wake the phone up?
My current phone settings are as follow:
Voice input and output - Voice recognition settings:
- Listen over bluetooth ON
Voice talk - Voice talk setting:
- Launch on Bluetooth - ON
- Wake up command - ON
Any help would be greatly appreciated.
I switched to Tmo SGS2 (Stock rom rooted) from my Vibrant (Bionix V2) a few days ago. With my vibrant, when I long press the button on my Jawbone ICON bluetooth headset, it would start Google Voice Command even the screen is locked and I can call someone without touching the phone. With Tmo SGS2, the Vlingo Voice command would not start if the screen is locked. If I unlock the screen, Vlingo Voice Command would start and I can use voice command to make a call.
Is there a way so I can configure Vlingo to accept voice command even the lock screen is on?
Better yet, anyone knows how to get the Google Voice Dialer back? I tried Market but it is not there.
Thanks.