ROM Base by Dungphp RUU Desire HD 3.06.405.1, 3.12.405.1 - With sense 3.0 - Android 2.3.5 Tweakers Edition by Visentinel With STABLE DATA2SD by Sibere
****Pay attention to the install procedure****
Reason for ROM
All tweaked out, and virtually unlimited space thanks to siberes DATA2SD made for Desire roms. ZRAM by Dorimanx and Kernel 2.8 by Dorimanx. Dungphp's sense 3 rom is the best sense rom in town and then i came along and made it even better
Tweaks Feature List
Tweaked IO
- NOOP IO Scheduler set to defualt
- 512 IO Cache
-You can change the above with system tuner set at boot with init.d
Tweaked Ram Management
- Latest Legendary Dorimanx's ZRAM Script
- Automatically mounts mmcblk0p3 for sd-based swap
Stripped Sense 3, just the awesome Sense UI
- Sense 3 Stripped of all useless HTC stock apps + libs (Basically Everything)
- Stripped all downloadable GAPPS
- Launcher Pro is Default, There is no Rosie (Doesn't work after stripping HTC Apps) Install any launcher you prefer
All of Dungphp's rom features...
Working:
- Phone, Sound, Camera, Camcorder, GPS, Data, Wifi, bluetooth ...
- Mount, USB Disk, Gallery, 720p videos, Flash with video, sound streaming ...
Bugs:
- Graphical Glitches - Dont try to fix it, aint as bad as anyone thinks... you can live with it ! - or try and flash a .35 kernel, but performance goes down... is it worth it ?
- Sense Customization settings closes without launching the customization app
INSTALL PROCEDURE
MAGLDR partition sizes - Use Last 24mb NAND - 5/330/10
Install the rom as normal with CWM
Reboot and wait for the rom to finish first boot and complete the HTC wizard, wait a couple of minutes at the launcherpro desktop, you may config wifi and some settings but DO NOT add any accounts to accounts and sync.
Reboot
Flash the Data2SD in CWM
Reboot
Install Superuser from the market
I had to strip "everything" I could to get this rom to boot with enough NAND data space to function before rebooting again to install data2sd. I had 22mb data space left on my first boot.
Enjoy
Download - You Need Both
Download the Rom
Download the Data2SD
Screenshots
Attached to thread.
Introducing the...
FutureLog
17 - dec
Fix the "Customize" in settings. One of the HTC Apps was responsible for that
Maybe a Sense 3.5 release but there isn't much difference between 3 and 3.5 for the purposes of this ROM, also I could not shrink a sense 3.5 rom enough for first boot so..
A. I need time to experiment with more stripping ideas
B. Learn how to integrate Siberes Data2SD
C. Figure out why removing the A2SD+ from the sense 3.5 runny roms released here completely breaks them.
ChangleLog
Future 1.2 - Released as CWM update to 1.1
Better Zram Settings - Attached to this post is an updated 02zram. Flash in CWM.
New 2.9 kernel by dorimanx attached - fixes a bluetooth bug.
1.1
First released version
update kernel to dorimanxs 2.8
update zram to new version
1.0
First Version - tested for 48 hours
Benchmark
Avg NAND Speed = 27200.392 KB/s<=> 26.563 MB/s
Test file in /data/data wich is on sdext by data2sd.
I/O Schedulers and devices Tester by iamcxa
seems a great rom be cooked!
kill the rosie.apk and take out the htc screen is a good idea to make the speed up for performance , i did that for my test build ... it's fast and faster.
iamcxa said:
seems a great rom be cooked!
kill the rosie.apk and take out the htc screen is a good idea to make the speed up for performance , i did that for my test build ... it's fast and faster.
Click to expand...
Click to collapse
Thanks Mate i was nervous about what the first person was going to say you give me a smile.
Visentinel said:
Thanks Mate i was nervous about what the first person was going to say you give me a smile.
Click to expand...
Click to collapse
when i opened the thread i also nervous and especially
that is my first thread.
but be relaxed, i think this will be a stable and cool rom!
tank's bro,downloading now
Cool, you would be the first person other than me to use this rom
let me know how it goes asap, i want to be sure 330m system works, 315 worked for me but as you can see i have under 5mb left.
After you flash go to advanced and report errors, mount sdcard and check the cwm log and make sure all the minzips worked, to ensure you didint run out of system partition space.
And remember to enable use last 24 nand in magldr under services.
Graphic glitches...You're wrong. I can't live with that.
Sent from my HTC HD2 using Tapatalk
mzebrowski13 said:
Graphic glitches...You're wrong. I can't live with that.
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
Lol your loss.
Sent from my Desire HD using Tapatalk
Visentinel said:
Lol your loss.
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
well ,take out glitches but lose performance ... okay that's depending on users.
Visentinel said:
Lol your loss.
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
Well now you're right ... V
iamcxa said:
well ,take out glitches but lose performance ... okay that's depending on users.
Click to expand...
Click to collapse
The glitches are barely noticeable ! Don't u agree ?
Sent from my Desire HD using Tapatalk
Visentinel said:
The glitches are barely noticeable ! Don't u agree ?
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
yes but seems get problem in buffer, did you noticed this? if the animation is shorter then glitches doesn't display.
see: http://forum.xda-developers.com/showthread.php?t=1386684
iamcxa said:
yes but seems get problem in buffer, did you noticed this? if the animation is shorter then glitches doesn't display.
see: http://forum.xda-developers.com/showthread.php?t=1386684
Click to expand...
Click to collapse
So your thinking this could be fixed in a .32 kernel if someone could figure out why the .35 kernel fixes it by finding the missing part ?
I am simply hoping soon Dorimanx might dev a .35 kernel with his performance modifications, I think he just needs time.
Just an update on this rom, the latest zram script by Dorimanx is clashing with this roms oom settings, I am going to work on tweaking it. I will post an updated zram script for this ROM once I am satisfied with the settings.
-Update
2nd post has CWM flash zip with a better zram script.
Dorimanx Kernel 2.8 had a Bluetooth Bug, attached to 2nd post is updated 2.9 kernel.
can't test now, but thanks anyway for a new sense work for Hd2!
I suggest to update kernel to 2.9 in order to fix bt bug
I will test this rom next week
Visentinel said:
So your thinking this could be fixed in a .32 kernel if someone could figure out why the .35 kernel fixes it by finding the missing part ?
I am simply hoping soon Dorimanx might dev a .35 kernel with his performance modifications, I think he just needs time.
Just an update on this rom, the latest zram script by Dorimanx is clashing with this roms oom settings, I am going to work on tweaking it. I will post an updated zram script for this ROM once I am satisfied with the settings.
-Update
2nd post has CWM flash zip with a better zram script.
Dorimanx Kernel 2.8 had a Bluetooth Bug, attached to 2nd post is updated 2.9 kernel.
Click to expand...
Click to collapse
yes, that is what i want to say, I think that should has possible be fix. but if someday DM decide to coding .35 ... well, I thought we put it away temporary and try our best for cooking rom first, and if possible then we could try to fix and coding kernel together. because kernel builder not to many but have lot of chefs, so i thought maybe we should join to kernel part to find out the bugs.
iamcxa said:
yes, that is what i want to say, I think that should has possible be fix. but if someday DM decide to coding .35 ... well, I thought we put it away temporary and try our best for cooking rom first, and if possible then we could try to fix and coding kernel together. because kernel builder not to many but have lot of chefs, so i thought maybe we should join to kernel part to find out the bugs.
Click to expand...
Click to collapse
It's a good idea but atleast for me I know nothing of kernels, I can't even figure out how to compile a kernel lol, I have tried.
I will ask dorimanx if he is willing to assist in this tho, I will offer him my full support to test.
Sent from my Desire HD using Tapatalk
If anyone has any sod issues just let me know il make an update to stop loading sd based swap. Usually sd swap is the reason for it.
Posted from my tweaked DHD.
Related
THIS IS OBSOLTE! VISIT THE NEW THREAD: http://forum.xda-developers.com/showthread.php?t=704974
PS: MODS, PLEASE CLOSE THIS. THANKS.
Hi guys! After hours and hours of work and hundreds of compiled kernels, VanillaEclair 3.3 is finally ready. Please read this post carefully, and enjoy!
First, I would like to thank Cyanogen for his 5.0.7, behnaam for the 2.6.29 kernel sources and all the users who have been testing all the Release Candidates. This wouldn't have been possible without you.
What has been done to the kernel:
- tweaked scheduler;
- tweaked internal task killer;
- pre-overclock @691/176(default kernel), using the ONDEMAND CPU governor
- improved RAM management and usage
- improved overall CPU speed - you can't take anything more out of it
... all of these result to:
- amazing battery life
- great overall performance
Features:
- all hardware working
- GPS, AGPS
- GPRS/EDGE/3G/HSDPA aka full 2G/3G support
- photos, videos
- phone calls
- messaging
- auto-brightness
- LEDs (except trackball led)
- trackball
- facebook sync, google sync, twitter sync etc.
- Youtube HD
- accelerometer
- rooted
- A2SD using Cyanogen's method -> all your apps & Dalvik-Cache go to SDCard if you enable the option in settings
- Bluetooth file transfer, bluetooth music(no A2DP yet)
- busybox
- compcache using heyodee's script
... and much more!
What doesn't work:
- A2DP aka Bluetooth audio in calls
- trackball led
FAQ/Readme:
How can I enable Apps2SD?
To enable Apps2SD you have to go to Settings > Applications and check Apps2SD option. You also need an EXT2/3 partition on your SDCard.
I flashed this ROM and now when I want to do a Nandroid backup I get an error. What should I do?
This happens because of the new A2SD method. Please do a BART backup, but be careful: you can only have a BART backup on your SDCard at a time.
I flashed this ROM and I got stuck with the HERO screen for a while.
Please flash the LoKernel or the Freekernel. It should fix your issue.
When the phone wakes up sometimes I get some bad graphics and the lockscreen is upside down.
This thing is rare, but, if you get it, either flash the Lokernel or Freekernel, either live with it
What's next?
Well, unfortunately I won't be able to work on this ROM until the 5th of July. I hope that when I get back from my vacation I can fix A2DP and trackball LED and make this even better.
I don't like vanilla. What should I do?
How can you not like vanilla?! But if you're one of the guys, I suggest you try my other ROM - ChocolateEclair - which is a Sense ROM and users say it's pretty good
DOWNLOADS:
VanillaEclair 3.3 NAS @ 691/176
This is the vanilla ROM with the default [email protected]/176. If something is wrong or you want to see what other kernels can do, you may flash one of these on top of it:
VanillaEclair 3.3 lokernel @576/245
This kernel is recommended for those who have issues with waking up or cannot boot with the default kernel.
VanillaEclair 3.3 freekernel @518/245
The Freekernel is coming at the default HTC speeds, but you have 17 frequencies available in the table to overclock it as you wish with OverclockingWidget or SetCPU. This is slower than the default kernel because of the unoptimized speed jumps.
VanillaEclair 3.3 extremekernel @768/176
This is for the lucky ones which have a Hero that can work properly @768. But it's not only the 48% overclock. You also have a much improved scheduler and an aggressive internal task killer, that will start killing apps when you have 35MB RAM memory free.
VanillaEclair 3.3 ExperimentalKernel @691/176
Flash this at your own risk!
This is the experimental kernel, which has one nice feature: NTFS support. You can replace that FAT parition on your SDCard with a NTFS one, in case you want to. It also has a very aggressive internal task killer(starts killing @35MB RAM free), some aggressive CPU settings and some experimental settings @scheduler. This might be the future though!
VanillaEclair 3.3 Default kernel
Flash this if you tried one of the other kernels and you want to move back to the default one.
Do you like it? Buy me a Coke if you can.
Click to expand...
Click to collapse
Reserved .
Reserved... god, I like posting )
Thx for your hard work Radug, i'm not found of vanilla style, but tried your sense one and you're doing great !!!
Hope you'll work on WWE when it's out
what about jit? use the one from RC4?
Great RaduG !! downloading !!!!
Awesome! Will install later today for sure!
Wired tether fixed in this kernel?
@kosmiq
It should work mate, I completely forgot to test it. Anyway, all the kernels are USB Tethering enabled.
hello RaduG
i must say that you have a supergood ROM.
Been with it since RC3 and i love the vanillaflavour!!
Thankyou very much. stuff like this makes the HTC Hero to more than just an awesome phone!
Excellent thanks! Flashing now!
Downloading and trying, But somehow I prefer your Chocolate Eclair ROM, Actually I like Sense
downloaded and will flash later... thanks again RaduG!
Sent from my Hero using the XDA mobile application powered by Tapatalk
can jit be enabled or there is no jit?
You can grab the JIT package posted in the old thread.
ArchaosAngel said:
can jit be enabled or there is no jit?
Click to expand...
Click to collapse
We will probably have to wait till heyodee drops his 5 cents here and releases the script to enable it, as aparently they have to be customized for each release.
So, wiping dalvik is all I need to do if I come from RC4?
Yes mate. That's pretty much all.
I did just wipe Dalvik and everything works great. It is a pity that so long there will be no updates, but the holidays have to be. So have fun ;-)
That's one of the reasons why I chose to work on this release a few more days, to make it as stable as possible so that you won't need another ROM for a while If you don't need A2DP, it's perfectly fine. But if you do, Chocolate Eclair is waiting for your Hero
Awesome work, thank you, just out of interest, will the trackball led ever work?
[ROM][Vanilla 2.1][A2DP] VanillaEclair 4.0 "You don't score until you score"
Hi guys! After hours and hours of work and hundreds of compiled kernels, the final release of VanillaEclair is ready. Please read this post carefully, and enjoy!
PS: A2DP works properly now...
First, I would like to thank Cyanogen for his 5.0.7, behnaam for the 2.6.29 kernel sources, all the users who have been testing all the Release Candidates and Darchstar for giving me a great idea. This wouldn't have been possible without you all.
What has been done to the kernel:
- tweaked scheduler;
- tweaked internal task killer;
- pre-overclock @691/176(default kernel), using the ONDEMAND CPU governor
- improved RAM management and usage
- improved overall CPU speed - you can't take anything more out of it
... all of these result to:
- amazing battery life
- great overall performance
Features:
- all hardware working
- A2DP
- GPS, AGPS, WiFi
- GPRS/EDGE/3G/HSDPA aka full 2G/3G support
- photos, videos
- phone calls
- messaging
- auto-brightness
- LEDs (except trackball led)
- trackball
- facebook sync, google sync, twitter sync etc.
- Youtube HD
- accelerometer
- rooted
- A2SD using Cyanogen's method -> all your apps & Dalvik-Cache go to SDCard if you enable the option in settings
- Bluetooth
- busybox
- compcache using heyodee's script
... and much more!
What doesn't work:
- trackball led - FIX HERE: http://forum.xda-developers.com/showpost.php?p=6899688&postcount=439
FAQ/Readme:
How can I enable Apps2SD?
To enable Apps2SD you have to go to Settings > Applications and check Apps2SD option. You also need an EXT2/3 partition on your SDCard.
I flashed this ROM and now when I want to do a Nandroid backup I get an error. What should I do?
This happens because of the new A2SD method. Please do a BART backup, but be careful: you can only have a BART backup on your SDCard at a time.
I flashed this ROM and I got stuck with the HERO screen for a while.
Please flash the LoKernel or the Freekernel. It should fix your issue.
When the phone wakes up sometimes I get some bad graphics and the lockscreen is upside down.
This thing is rare, but, if you get it, either flash the Lokernel or Freekernel, either live with it
What's next?
Well, unfortunately I won't be able to work on this ROM until the 5th of July. Will release an update fix for trackball lights when I come back, so don't go with an other ROM!
I don't like vanilla. What should I do?
How can you not like vanilla?! But if you're one of the guys, I suggest you try my other ROM - ChocolateEclair - which is a Sense ROM and users say it's pretty good
DOWNLOADS:
VanillaEclair 4.0 NAS @ 691/176
This is the vanilla ROM with the default [email protected]/176. If something is wrong or you want to see what other kernels can do, you may flash one of these on top of it:
VanillaEclair 4.0 lokernel @576/245
This kernel is recommended for those who have issues with waking up or cannot boot with the default kernel.
VanillaEclair 4.0 freekernel @537/245 *** fixed WiFi
The Freekernel is coming at the default HTC speeds, but you have 17 frequencies available in the table to overclock it as you wish with OverclockingWidget or SetCPU. This is slower than the default kernel because of the unoptimized speed jumps.
VanillaEclair 4.0 extremekernel @768/176
This is for the lucky ones which have a Hero that can work properly @768. But it's not only the 48% overclock. You also have a much improved scheduler and an aggressive internal task killer, that will start killing apps when you have 35MB RAM memory free.
VanillaEclair 4.0 ExperimentalKernel @691/176
Flash this at your own risk!
This is the experimental kernel, which has one nice feature: NTFS support. You can replace that FAT parition on your SDCard with a NTFS one, in case you want to. It also has a very aggressive internal task killer(starts killing @35MB RAM free), some aggressive CPU settings and some experimental settings @scheduler. This might be the future though!
VanillaEclair 4.0 Default kernel
Flash this if you tried one of the other kernels and you want to move back to the default one.
Do you like it? Buy me a Coke if you can.
Reserved.....
can i just flash this NAS over 3.3
Awesome! Absolutely awesomesauce!
Yes, you can.
Am I blind? Because I don't see where you posted something about your great idea
A2DP was the idea That's the thing.
fix the trackball and i'm flashing
Ow ok, I thought so
Very nice work again RaduG!
RaduG said:
A2DP was the idea That's the thing.
Click to expand...
Click to collapse
Out of pure curiosity, what did you do different this time after the help from DarchStar? Was it not in the kernel but elsewhere?
Edit: nevermind, just saw your thread.
When I manage to fix the trackball I will release an update package. Meanwhile, I'm happy that I can leave you full-featured when I'm away
@kosmiq
No mate, it was a damn firmware file. I've opened a topic about that so that all AOSP roms can have A2DP working from now on. I've explained the issue there.
Radu, you're a genius... can't wait to test this
Great! A2DP works perfect with my headset, and it should work with any headset available.
Note: I've included a proper compcache script(heyodee) and fixed the camera app.
OMG
32GB class 10 SD-card and VE 4.0 in the same minute...
This could not be better end of the working week... pity I did not bring my notebook to work.
RaduG said:
Great! A2DP works perfect with my headset, and it should work with any headset available.
Note: I've included a proper compcache script(heyodee) and fixed the camera app.
Click to expand...
Click to collapse
so we can simply activate / dis activate compacahe via spareparts on the go aye w/p the need of pusing heyodee's script aye
bah! mine doesnt wanna boot.
gonna redo a clean reflash
What about camera ? Still no zoom and 3Mpx only ?
Big surprise thought, good job...
Well, waiting for 'heyodee' JIT !! Hope you(or someone) relesae it asap. Can't wait to hands-on this latest version with JIT enable.
Thanks you so much!
Keyboard
Hi, can you please tell me if we now have the voice icon on the Android keyboard?
5MPx and no zoom yet.
Flashed Seems to be working but Mod Version under Settings--> bout is VanillaEclair 3.3
My radio is 63.18.55.06OH_6.35.15.01
Is this the right version? Or should it be OU?
This is my first post in this forum and I hope this works as well for you as it has for me.
First and foremost: I am not a developer; just an advanced user that has spent many many many hours in these forums and has used the tools I have found to make my deice the best it can possibly be. I TAKE NO RESPONSIBILITY FOR ANY DAMAGE DONE TO YOUR DEVICE BY USING THE SCRIPTS PROVIDED. I did not create these scripts and for the life of me cannot remember which forum or developer(s) I got them from; I am sorry that I cannot give the proper credit.
I have been using this DATA2SD method for about a month with several different ROMs and have found it to be very fast and very stable (only one crash in 2 weeks using Hyperdroid 2.1, not sure what caused it).
I am currently using the latest Hyperdroid CM7 (big Thanx to Pongster for a fantastic build!), albeit a version cooked using dsixda's kitchen to include my favorite apps and a few other changes. I have also used these scripts with the AOSP MIUI 1.6.24 and up ROMs (my NAND configuration has not changed between the two [MIUI and CM7], not sure if the large cache size helps or not). I have only used this process successfully with these two builds and cannot attest to the compatibility or stability if used with any other firmware.
I am using a 200MB system partition with 45mb for cache with Clockwork Recovery 4 (partitioned and updated using the HD2 toolkit). My SD card is using EXT3 set at 1024MB. Once again, this is the only configuration I have used successfully.
**BUG**
The only bug I have noticed so far is that whenever the device is rebooted CM7's Theme Manager reverts to the default (system) theme.
Instructions are included in the download. The scores shown were attained running Hyperdroid CM7 with the governor set to performance at 1152mhz (the highest stable overclock speed for my device using an 2.3.4 based ROM). The scores are provided by Quadrant Advanced (of course) and Device Mark.
nice but why is it only for tmous ?
i have one but i wonder why an tmous version is neccessary
errmm and i think u should post some Screens of the homescreen
This should work for 512 as well, i have only been able to test on us version... will post some screen shots
Sent from my HD2
Posted another in the screen shots forum
Sent from my HD2
so can some one tell me how can i try it on a eu version? I mean do i just flash it in the cwm recovery or something else?
beston94 said:
so can some one tell me how can i try it on a eu version? I mean do i just flash it in the cwm recovery or something else?
Click to expand...
Click to collapse
It should work as well as it works on the tmous version because it doesn't use that much place that requires a tmous. You can't to anything wrong
If u try it I would say please report back so that the dev know if it works there too
Sent from my HD2 using XDA Premium App
I included instructions with the download; these are scripts that are flashable visa clockwork recovery and should work with your device. Compatibility issues usually come into to play with the ROM that is used; it must support scripts (I think the proper term is init.d scripts). Usually Rom s that already have Apps2sd support this but i have only used this process successfully ( stable) with the AOSP MIUI and Hyperdroid ROMs
Sent from my HD2
cinnesere said:
This is my first post in this forum and I hope this works as well for you as it has for me.
First and foremost: I am not a developer; just an advanced user that has spent many many many hours in these forums and has used the tools I have found to make my deice the best it can possibly be. I TAKE NO RESPONSIBILITY FOR ANY DAMAGE DONE TO YOUR DEVICE BY USING THE SCRIPTS PROVIDED. I did not create these scripts and for the life of me cannot remember which forum or developer(s) I got them from; I am sorry that I cannot give the proper credit.
I have been using this DATA2SD method for about a month with several different ROMs and have found it to be very fast and very stable (only one crash in 2 weeks using Hyperdroid 2.1, not sure what caused it).
I am currently using the latest Hyperdroid CM7 (big Thanx to Pongster for a fantastic build!), albeit a version cooked using dsixda's kitchen to include my favorite apps and a few other changes. I have also used these scripts with the AOSP MIUI 1.6.24 and up ROMs (my NAND configuration has not changed between the two [MIUI and CM7], not sure if the large cache size helps or not). I have only used this process successfully with these two builds and cannot attest to the compatibility or stability if used with any other firmware.
I am using a 200MB system partition with 45mb for cache with Clockwork Recovery 4 (partitioned and updated using the HD2 toolkit). My SD card is using EXT3 set at 1024MB. Once again, this is the only configuration I have used successfully.
**BUG**
The only bug I have noticed so far is that whenever the device is rebooted http://forum.xda-developers.com/showthread.php?t=852219&page=37CM7's Theme Manager reverts to the default (system) theme.
Instructions are included in the download. The scores shown were attained running Hyperdroid CM7 with the governor set to performance at 1152mhz (the highest stable overclock speed for my device using an 2.3.4 based ROM). The scores are provided by Quadrant Advanced (of course) and Device Mark.
Click to expand...
Click to collapse
Is the same as:
http://forum.xda-developers.com/showthread.php?t=527636
or
http://forum.xda-developers.com/showthread.php?t=852219&page=37
or is another approach?
I don't believe so; i believe the process outlined in that post (i could be wrong) uses a data image similar to the one Rafpigna uses in Rafdroid or in Acura MIUI which is stored on the root of the sd card. This script uses ext 3 for the storage. I could be wrong, this is my first time seeing that post.
Sent from my HD2
Today's run
Sent from my HD2
i tryed with EU HD2 and no problem
one question: it's possible to try to OC tytung kernel to 1.5ghz? (like in rafpigna 1.9)
pirlano said:
i tryed with EU HD2 and no problem
one question: it's possible to try to OC tytung kernel to 1.5ghz? (like in rafpigna 1.9)
Click to expand...
Click to collapse
It should work :$
But make a nandroid backup before flashing the kernel so you can revert to the "stock" rom if booting fails after flashing
Sent from my HD2 using XDA Premium App
pirlano said:
i tryed with EU HD2 and no problem
one question: it's possible to try to OC tytung kernel to 1.5ghz? (like in rafpigna 1.9)
Click to expand...
Click to collapse
I have not been able to use Raf's kernel with any 2.3.4 Rom at 1.5 ghz with or without these scripts. I haven't seen anyone we in the forums mention this so maybe it is my device... if anyone has a suggestion I would live to see it, i really like Raf's kernel, sips the battery...tytungs kernel maxes at 1190, which is also unstable on my device with 2.3.4 Roms
Sent from my HD2
cinnesere said:
I have not been able to use Raf's kernel with any 2.3.4 Rom at 1.5 ghz with or without these scripts. I haven't seen anyone we in the forums mention this so maybe it is my device... if anyone has a suggestion I would live to see it, i really like Raf's kernel, sips the battery...tytungs kernel maxes at 1190, which is also unstable on my device with 2.3.4 Roms
Sent from my HD2
Click to expand...
Click to collapse
tytung is stable for me and 1190mhz on tytung is fast as 1536mhz on rafpigna one, so i was thinking that 1536mhz with tytung would be awesome...
btw with hyperdroid cm7 v2.1 with tytung at 1190mhz and you trick i'm only able to reach """only""" 2500 point in quadrant, and 3d graphic is corrupted (some 3d bench are black). it's possible to update graphic driver with an update.zip in recovery?
what rom are you using to reach 3000 points?
pirlano said:
tytung is stable for me and 1190mhz on tytung is fast as 1536mhz on rafpigna one, so i was thinking that 1536mhz with tytung would be awesome...
btw with hyperdroid cm7 v2.1 with tytung at 1190mhz and you trick i'm only able to reach """only""" 2500 point in quadrant, and 3d graphic is corrupted (some 3d bench are black). it's possible to update graphic driver with an update.zip in recovery?
what rom are you using to reach 3000 points?
Click to expand...
Click to collapse
I am running Hyperdroid cm7 2.1 at 1152MHz ( the highest stake clock speed for my device). Have you tried setting the governor to performance in cyanogenmod settings? Chainfire 3d lets you update the driver of the device but this program is meant to make the rendering of complex 3d graphics easier for older devices (at least that's my understanding). I am using this program but I did not apply the effects to quadrant ( or any other app). The high scores database read/ write speed.
Sent from my HD2
cinnesere said:
I am running Hyperdroid cm7 2.1 at 1152MHz ( the highest stake clock speed for my device). Have you tried setting the governor to performance in cyanogenmod settings? Chainfire 3d lets you update the driver of the device but this program is meant to make the rendering of complex 3d graphics easier for older devices (at least that's my understanding). I am using this program but I did not apply the effects to quadrant ( or any other app). The high scores database read/ write speed.
Sent from my HD2
Click to expand...
Click to collapse
yes when i play games or do some bench, i set performance and min and max at 1190mhz it's possible to go higher than 1190mhz with tytung r10? (limit is written on the kernel or somewhere in system params?)
i tryed to install chainfire drivers but i still got black screen on 3d tests
3d tests on newer gb cm7 are working ok, so i'm asking if there is an update.zip flashable in recovery to update driver in this pongster's hyperdroid cm7 rom
pirlano said:
yes when i play games or do some bench, i set performance and min and max at 1190mhz it's possible to go higher than 1190mhz with tytung r10? (limit is written on the kernel or somewhere in system params?)
i tryed to install chainfire drivers but i still got black screen on 3d tests
3d tests on newer gb cm7 are working ok, so i'm asking if there is an update.zip flashable in recovery to update driver in this pongster's hyperdroid cm7 rom
Click to expand...
Click to collapse
I tried once to substitute Raf's kernel for tytungs using dsixda's kitchen with a gingerbread Rom and it wouldn't boot. I don't know enough about kernels to change the processor values and I don't know if a flashable update for the drivers for this Rom.
Sent from my HD2
cinnesere said:
Instructions are included in the download. The scores shown were attained running Hyperdroid CM7 with the governor set to performance at 1152mhz (the highest stable overclock speed for my device using an 2.3.4 based ROM). The scores are provided by Quadrant Advanced (of course) and Device Mark.
Click to expand...
Click to collapse
Looks like a nice script! Questions:
1) Is it necessary to use the same partition sizes as you for it to work?
2) Once Data2SD is implemented, can you restore data partition to SD using advanced restore in CWM?
So does this script really make the rom faster and more stable than it already is? Like for example dorimaxes rom?
Sent from my HTC HD2 using XDA Premium App
lukedunk said:
Looks like a nice script! Questions:
1) Is it necessary to use the same partition sizes as you for it to work?
2) Once Data2SD is implemented, can you restore data partition to SD using advanced restore in CWM?
Click to expand...
Click to collapse
Thank you...
1) The short answer is; I don't know. I have used this partition setup with several ROMs and just decided to try it with the scripts. I am using this ad my daily driver and have been for about a month with only one crash, so Idon't want to start experimenting with the setup just incase ( Hyperdroid is a very stable Rom to begin with).
2) The script itself is not apart of the backup so you would have to follow the installation procedure after the restore.
Sent from my HD2
Kernel based on tytungs r11 (all credits to him) see changelog for improvements
Differences:
-Removed reiser fs and btrfs filesystems useless for most users.
-No default USB tether.
-No need for custom vold(usb notifcations)
-Fixes
For the rest all the same features.
I will continue to add changes. But to add more changes I need user feedback first of the latest kernel. Plan is to update the kernel every 1-7 days. And keep or remove commits based on user feedback.
Attachment is for Magldr flash in cwm.
For clk extract package and use fastboot commands.
Gitorious source
Updated by my friend joplayer. The kernel building etc is done by me.
Credits
Alle kernel devs
Tytung, Markinus, Cotulla, hastarin.etc
Donations:
I would like to sugest to donate to markinus he did a lot of work on hd2 kernel. And he is a bit forgotten somehow. For the rest of course you can also donate to the famous guy cotulla and the smart guy tytung.
Changelog:
Code:
[B]2.1[/B]
-Updated usb driver full notifications etc.
-No custom vold needed anymore.
-Completely disabled RNDIS driver use app from market
(Because missing stuff and issues)
-msm_fb: Fix framebuffer console [Arve Hjønnevåg]
-updated to latest mmc evo driver
-For some reason it wants to scan your sd card on boot for errors need to check why.
Added experimental:
-Kernel without extra I think unused network stuff. Needs testing
[B]2.0[/B]
[B][U]Various usb fixes maybe no need for custom vold in etc but I didnt test if the custom file is still needed, hopefully this fixes data drop.[/U][/B]
.....
-Fixed conditionals on MSM_RMT_STORAGE_SERVER -snq
-Clean ups
[B]1.4[/B]
-Disabled one useless debug feature
-Camera clean up >credit snq faster opening
-Small bug fix
-Compiler optimizations
-Switched to cfq I/O scheduler it is more consistent then noop.
[B]1.0[/B]
-Removed reiser fs and btrfs filesystems useless for most users.
-Smartass as default.
-Small config tweaks
Old releases:
See the attachments below
It is really important that you give feedback.
Please not the to general hd2 kernel bugs. This kernel is created with the intension to improve speed and stability. Not to fix the biggest hd2 kernel bugs the reason for this is simply lack of skill.
Woke..we was waiting for this..thx JW..I will try it now ..place release your miui 1.8.19 with it
Sent from my HTC HD2 using XDA Premium App
JANs "[KERNEL]-{---------JW_tytung_S1----------------}" Kernel ... what a surprise
Does it include the wake up lag fix?
Sent from my HTC HD2 using XDA Premium App
prulleman said:
Does it include the wake up lag fix?
Sent from my HTC HD2 using XDA Premium App
Click to expand...
Click to collapse
The base is TyTungs R11b2 ... so should be included the wake up lag fix.
I am using tytung 11 final Does this kernel change anything to his wifi calling? I need wifi calling.
what happen to Tytung's own kernel releases? halted and handed over to you?
suggestions for opening post
change log ?
date change log?
tytung original version vs S1, S2 etc version..
Thanks Awarded for the effort anyways
flashing now after NANDROID backup
jcsy said:
what happen to Tytung's own kernel releases? halted and handed over to you?
suggestions for opening post
change log ?
date change log?
tytung original version vs S1, S2 etc version..
Click to expand...
Click to collapse
No he didnt handed them over to me. I keeped tytungs name for the kernel just as respect for him since my work is very minimal. Thanks for the suggestions I will use them in the next release my plan is just to spend more time to improve the kernel by using general android kernel and cm fixes.
And about wifi calling the module and kernel support is included apart from reiser fs and btrfs you should have everything what tytungs kernel has.
ok
oh yeah, hastarin's name should be there since Markinus branch was modded by Hastarin, then Tytung modded Hastarins final 8.6 kernel ( back in the SD build days)
no idea where Hastarin is nowadays though..
great...but I dfound out that tytungs kernel 11 has some serious mobile network connection issues....almost everytime the device turns the screen off and enters sleep state, connection is lost, after waking up, I need to enter PIN to start radio again...maybe you could fix that too
(I am on clk)
nice work m8!
I would love to have a variant of the tytung's kernel for the GB Sense builds with working BT Headset.
Also the OC limit could be pushed further than 1190mhz.
tested on Hyperdroid CM7 Honeybadger (2.3.4) and originally from Tytung r10
WIFI works
3G works , for now until I get to test that complaint regarding timeout during screenoff
Default Smartass will test battery drain and performance across next 24 hours
screen delay was fixed on mine, its so fast that if u keep pressing it , the screen blinks only for a bit
thanks mate
jcsy said:
tested on Hyperdroid CM7 Honeybadger (2.3.4) and originally from Tytung r10
WIFI works
3G works , for now until I get to test that complaint regarding timeout during screenoff
Default Smartass will test battery drain and performance across next 24 hours
screen delay was fixed on mine, its so fast that if u keep pressing it , the screen blinks only for a bit
thanks mate
Click to expand...
Click to collapse
-Keep in mind that battery might need to settle (maybe need to clean battery stats) that is always a bit different when using different kernel sometimes you need to sometimes it is not needed.
-
jcsy said:
ok
oh yeah, hastarin's name should be there since Markinus branch was modded by Hastarin, then Tytung modded Hastarins final 8.6 kernel ( back in the SD build days)
no idea where Hastarin is nowadays though..
Click to expand...
Click to collapse
i think he sold his HD2 and get Desire HD.
dunno why your mod feels slower and more ram comsuming. tested on dunghop pyramid clk v2.1.
edit : also very fast boot (my phone boot's faster than win mob time)
someone make a zip for clk user, this Fu**ing ADB doesn't work on windows 7
Gho57 said:
someone make a zip for clk user, this Fu**ing ADB doesn't work on windows 7
Click to expand...
Click to collapse
im on w7 64 bit and all working well
Finally we have a dedicated updating kernel every week or so... oh god i miss the old times when we had Hastarin and marichima etc.. kernels updated everyday =)))))
Edit: also check the battery issue while listening to music on standby mode, cuz i get 60-100mAh with tytung's kernel 11b2 on MIUI latest.
So this here is a ROM i ported over from the Incredible S
This rom belongs to the Android Revolution team.
So this rom is actually PORTED using our Leaked ICS rom so any bugs are pertained from that ROM.
Currently you cannot flash a custom sense kernel as there are some ramdisk modifications that must be made if you have any info on what must be done PLEASE say so in the comments so our developers can get a fix out soon.
As far as i know everything is working on this rom EXCEPT the GPS which needs some kernel modifications made.
wireless tethering confirmed working
This is the info that was posted on the rom thread of the Inc S:
Features
Removed software (CPU) rendering - full Adreno205 (GPU) rendering
Fully optimized and tweaked
ROOT (su + SuperSu Permissions - Thanks to koush)
Unsecured boot.img
Newest BusyBox
RAM optimizations
System signatures check enabled for system security and safety
Improved Adreno205 configuration for better quality and performance!
Improved virtual memory management
Speed optimizations
Enabled GPU UI rendering
SD Card speed tweak
Data, cache and system partitions mounting tweaks
Bloatware applications removed
All /system applications updated to latest available
All /data applications updated to latest available
Improved camera performance
Improved CPU governors performance
Most optimal system scheduler
Disabled kernel debugging for better performance
ZRAM ready!
Advanced Power Menu and CRT Animation as extra add-ons
Zipaligned (Improved RAM management)
Zipalign on boot (for user applications on data partition)
Fully de-odexed
init.d scripts (BusyBox run-parts) support
Auto init.d permissions set on boot
sysro/sysrw commands support
Excellent battery life!
Improved EXT4 performance
You can replace HTC boot animation with any custom one
SD card EXT4 partition support
OpenVPN support
4EXT Recovery (Thanks to madmaxx82)
Most up-to-date system files permissions
Adobe Flash Player support
Support almost 24h a day
Click to expand...
Click to collapse
Android 4.0.4 (Ice Cream Sandwich) - latest leak HTC 7.01.605.01
This is improved version of stock ROM - no visual changes!
Very fast, clean & stable!
Full HTC Sense 3.6 Interface
Multi-language (WWE)
For HTC Incredible 2
Thanks to HTC for the base firmware
Click to expand...
Click to collapse
Credits:
---- Android Revolution HD Team: ----
- mike1986 (ROM Creator & Team Founder)
- jkoljo (Beta-tester)
- KID_1194 (Graphic Design)
- Lizard (Files Hosting)
- MarcoHD (Files Hosting)
- Mavy170 (Files Hosting)
- madmaxx82 (4EXT Recovery Developer)
- Macrodroid (permission to port)
DOWNLOAD
https://docs.google.com/file/d/0B2dhYiuyyj_9NEhQbjFBQnNFeDg/edit?usp=sharing
Click to expand...
Click to collapse
Testing Room:
CDMA Version of this ROM please someone with Verizon try this out and tell me if it works. Thank you
https://docs.google.com/file/d/0B2dhYiuyyj_9YVFZbE5XZzk1TjQ/edit?usp=sharing
We have found a temporary fix for installing Custom Kernels on this ROM:
i made a backup using 4ext of viper with my kernel , flashed leaked ICS ROM , then in recovery under advanced recovery i restored the boot from my viper backup , rebooted , then flashed my full kernel .zip lol , I'm having trouble with WiFi working properly but its again progress
Edit it works , fully
Make sure you wipe cache and dalvik before installing my kernel zip after you restore the boot
Click to expand...
Click to collapse
Please try it out i HIGHLY recommended
Yay..first one! I will hopefully have a kernel for you to include soon.
Awesome. Looking forward to trying this.
Sent from my Incredible 2 using xda app-developers app
Is there some easy way to get into recovery in the rom, so we don't have to pull the battery all the time
for the leaked rom there's no recovery in the power menu and reboot recovery in terminal doesn't work
michael3770 said:
Is there some easy way to get into recovery in the rom, so we don't have to pull the battery all the time
for the leaked rom there's no recovery in the power menu and reboot recovery in terminal doesn't work
Click to expand...
Click to collapse
Try Rom manager unless you have 4ext and 4ext recovery control.
Sent from my BrYCS'd Viperdinc.
michael3770 said:
Is there some easy way to get into recovery in the rom, so we don't have to pull the battery all the time
for the leaked rom there's no recovery in the power menu and reboot recovery in terminal doesn't work
Click to expand...
Click to collapse
You can use titanium, too.
Sent from my PAC-nanimous, e-coli resistant Dinc2
MoonMaster345 said:
So this here is a ROM i ported over from the Incredible S
This rom belongs to the Android Revolution team.
So this rom is actually based on our Leaked ICS rom so any bugs are pertained from that ROM.
Currently you cannot flash a custom sense kernel as there are some ramdisk modifications that must be made if you have any info on what must be done PLEASE say so in the comments so our developers can get a fix out soon.
As far as i know everything is working on this rom EXCEPT the GPS which needs some kernel modifications made.
wireless tethering confirmed working
This is the info that was posted on the rom thread of the Inc S:
Features
Credits:
---- Android Revolution HD Team: ----
- mike1986 (ROM Creator & Team Founder)
- jkoljo (Beta-tester)
- KID_1194 (Graphic Design)
- Lizard (Files Hosting)
- MarcoHD (Files Hosting)
- Mavy170 (Files Hosting)
- madmaxx82 (4EXT Recovery Developer)
- Macrodroid (permission to port)
DOWNLOAD
Click to expand...
Click to collapse
I've got the apm and one of the themes ported for this from the inc s forums, I'll post them tomorrow...
Sent from my Nexus 7 using xda premium
Hey thanks man, you're really helpful
This is perfect timing for the retirement of my DInc2. While I've moved on, it's got a lot of life left and I want to give it to my grandson. I was looking for a fresh, clean ROM to load after a SuperWipe and this one seems perfect.
How "broken" is the GPS? Is it completely unusable, or just finicky?
Thanks!
- Dave
ViperGeek said:
This is perfect timing for the retirement of my DInc2. While I've moved on, it's got a lot of life left and I want to give it to my grandson. I was looking for a fresh, clean ROM to load after a SuperWipe and this one seems perfect.
How "broken" is the GPS? Is it completely unusable, or just finicky?
Thanks!
- Dave
Click to expand...
Click to collapse
Gps is completely disconnected... Other than that, it's a great rom, very fast and smooth...
Sent from my Nexus 7 using xda premium
I tried this Rom and it wouldnt connect to Verizon even after I tried to reactivate it. Any ideas
Sent from my HTC Droid Incredible 2 using Tapatalk 2
Oh thanks for mentioning it, Since this is a port from the Inc S which is a gsm phone, there is no CDMA support, can one of you guys tell me how i can get cdma working?
MoonMaster345 said:
Oh thanks for mentioning it, Since this is a port from the Inc S which is a gsm phone, there is no CDMA support, can one of you guys tell me how i can get cdma working?
Click to expand...
Click to collapse
Move the ril libs from my ascension Rom, as well as changeng the telephony network in the build.prop from 0 to 4...
http://www.4shared.com/zip/I1HX3DHQ/android_revolution_hd-incredib.html
This was my original port. Camera and GPS are non-functional. Camera just needs the right libs and bins...
from my HTC Incredible 2 using xda premium
You ought to upload that file to another service cause 4shared sucks...like dropbox or something.
Unless you want me to do it for you.
Im working on fixing CDMA right now, although i cannot test it so i need some willingful men to step up hahahaha:good:
Yeah..30 mins to download your ARHD
Update: I followed the instructions of @Macrodroid and made this little number
https://docs.google.com/file/d/0B2dhYiuyyj_9YVFZbE5XZzk1TjQ/edit?usp=sharing
Click to expand...
Click to collapse
As i mentioned before, I cannot test these as my phone is not connected, so i need some of you nice people to step up.
And if you have any info on how to get a kernel to work on leaked rom-based roms, please let us know.
Thanks
MoonMaster345 said:
Update: I followed the instructions of @Macrodroid and made this little number
As i mentioned before, I cannot test these as my phone is not connected, so i need some of you nice people to step up.
And if you have any info on how to get a kernel to work on leaked rom-based roms, please let us know.
Thanks
Click to expand...
Click to collapse
Would love to, but I'm Verizon. I need CDMA.
Sent from my PAC-nanimous, e-coli resistant Dinc2
Exactly, flash that
A couple of key points on arhd; 1st, it's not based on a leak, It's the inc s ota. Second, I know 4 shared is slow, but it gives you a solid CDMA functioning base... You're more than welcome to reupload it on another server, though.
The GPS issue is because the Rom is setup for blackrose hboot. Our firmware doesn't work with that. The kernel needs to be tweaked so the GPS paths are pointed to the correct location for our phone.... Hopefully that helps our new kernel masters to help get it fixed...
Sent from my Nexus 7 using xda premium
What I meant by leak is that I used the leaked Rom to port this
Sent from my HTC Droid Incredible 2 using xda app-developers app
Macrodroid said:
Gps is completely disconnected... Other than that, it's a great rom, very fast and smooth...
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
GPS is working fine. ???