Develop Bugs

Turn over to activate speaker phone?

I hear these AT&T commercials talking about this feature, my verizon TP2 does not do that. The speaker phone button on the back does not do anything either. Is it a setting?

In my stock HTC TP2, in Phone settings (Windows Mobile's, not TouchFlo's), last tab (should be "Advanced"). There's an option that said "when the phone is facing down during a call, use loudspeaker". Check if your phone has this setting?
I don't get all these modifications by providers... in Hongkong phones are sold as is, even when bundled to a certain provider's plan. Many of those modifications aren't really improvements either...

My AT&T Tilt 2 stock rom does this by default!
Cool little feature!!!

not to hijack the thread or anything, but im having the same problem except with the t-mobile version. when its flipped, the mute button lights up but the speaker doesnt activate. the windows option is checked. i messed with some registry settings to enable two way recording (didnt work btw). but that cant be the problem as my brother is having the same problem with his unmodified tmo tp2. his option is checked too.
any ideas?

bump bump, anyone know whats wrong?

Do you have ANY sound? I was using Resco Audio Recorder and I couldn't use the speakerphone when it was working either.. I uninstalled it and no problems since.

i turned this off. it came on once when i was on the couch and it was loud near my ear and freaked me the f out.

I posted about this about a week ago, my solution was to get a new one.
My new one has about 75 dead pixels, so it's going back too.
I'm not satisfied with the build quality at this point...

the speaker does work... when you click the speaker button once in a call. it's just that it doesn't automatically do that when turned over in the call. only the mute button lights up green.
EDIT-
nevermind, it works now. i read this on your thread.
MCbrian said:
I'd say that unless you've been setting it down on an uneven surface -- or not actually setting down at all as the other guy suggests-- there must be something wrong with your phone.
There's no setting/configuration that would cause the inconsistent erratic behavior you describe -- going on then off, vibrating, etc -- if it's setting on a flat table-top or similar.
Click to expand...
Click to collapse
apparently i wasn't lying it evenly face down. i was trying it on the couch so that doesn't help. i layed it evenly this time and it vibrated and the speaker went on. then i did a couple of other tests at angles and sure enough you have to have it evenly face down. at one angle, i had it vibrating like a maniac because it thought it was even and then uneven.
problem solved!

You have to make sure it is even on the surface. Also doing a g-sensor calibration may help as well.

lehmaj said:
you have to make sure it is even on the surface. Also doing a g-sensor calibration may help as well.
Click to expand...
Click to collapse
cheers mate! Workd :d:d

screen wont come back on during call

my wife has the att nitro hd, when the screen goes off during a call sometimes nothing including power button will turn it back on. Anyone know of a fix? did the ATT small update fix this?
Actually it comes back on after a long minute or two. Not very helpful if you need the dialpad or keys, etc.
I have just rooted it for her and installed CWM.
I have added a few proximity tweaks to build.prop
gsm.proximity.enable=false (rebooted twice but screen still goes off)
also used the ro.lg.proximity and the mot.lge.proximity (dont recall exact wording) both were set to a value of 5.
I'll have to take alook into the lg hidden dialer menu to see if I can disable this.
I dont like this sensor on my device either, but I have an option in settings to disable it, which makes it bearable.
thanks for the help guys.
I have noticied LG throws together some junky builds, typos, bad english/grammar. Wonky sensors etc. Incorrect kernel build ReadMe's
I thought I recall someone with another device just placing a peice of tape over the sensor. hmmm..worth a try.
cheers.

chrisrotolo said:
gsm.proximity.enable=false (rebooted twice but screen still goes off)
also used the ro.lg.proximity and the mot.lge.proximity (dont recall exact wording) both were set to a value of 5.
Click to expand...
Click to collapse
Congrats. Today, you learned that most of the "tweaks" found at XDA are utter bull****

aremcee said:
Congrats. Today, you learned that most of the "tweaks" found at XDA are utter bull****
Click to expand...
Click to collapse
What about the tweaks that aren't BS? Are they already included in your CM9 builds?

From what I can tell, pretty much the main thing that build.prop is good for is providing information about the system and software (i.e. info about the build). It's not really used much for useful configurations as far as I know.

networks tweaks actually have doubled me download speed.
I still have faith.
but can anyone answer my questions I posted in ICS SLim thread and PM'ed Andasa , no responses yet.
does ICS slim or CM9 have option to keep lcd no during call? and does it work??
what's working not working? I found changelogs but not a working/not working list for CM9.
and has anyone successfully restored a nandroid from ICS to GB without real issues?
thanks guys.

i doubt the ota fixed your issue as the issue is not one that occurs for every nitro.
I can tell you that when I make a phone call they screen stays no.
what's working not working, well, many of us are running it daily with no probs.
as you prolly know, it is a nightly build so a public list of what's working or not isn't rly part of the deal.
i've succesfully restore a nandroid from both slim and cm9 back to the stock att rom and others many many times. dozens.

thanks good enough.
I will have to give it a go.
would you recommend one or the other?
CM9 or slim?
thank you.

well, I like them both a lot. slim is just a trimmed down version of cm9 and i _think_ it does run just a bit snappier........maybe..but it's not wildly different from cm9. I usually switch back&forth throughout the day.

There's no setting in CM9 to disable the proximity sensor, although there may be a way to do it.

We just got a Nitro HD for my wife and her phone also has this issue. I have not gotten to know the phone well enough to try rooting or anything else of that nature, it's pure stock.
When she makes a call the screen turns off immediately after hitting the call button and will not wake up. When she receives a call we get a glimpse of the in-call screen with the various buttons etc but then the screen turns off. If the other party hangs up her screen turns back on, but if she calls something automated, like voicemail, she can't do anything except pull the battery to disconnect.
I've tried putting my thumb over the proximity sensor, hitting all buttons including power, and nothing makes the screen wake up or turns the phone off other than a battery pull.
The phone was running a build from last November when we first got it (V10i?) and today prompted us to update, so I did that hoping it would solve the problem. The phone is currently on V10j, but the problem persists.
Any help?

no driver said:
We just got a Nitro HD for my wife and her phone also has this issue. I have not gotten to know the phone well enough to try rooting or anything else of that nature, it's pure stock.
When she makes a call the screen turns off immediately after hitting the call button and will not wake up. When she receives a call we get a glimpse of the in-call screen with the various buttons etc but then the screen turns off. If the other party hangs up her screen turns back on, but if she calls something automated, like voicemail, she can't do anything except pull the battery to disconnect.
I've tried putting my thumb over the proximity sensor, hitting all buttons including power, and nothing makes the screen wake up or turns the phone off other than a battery pull.
The phone was running a build from last November when we first got it (V10i?) and today prompted us to update, so I did that hoping it would solve the problem. The phone is currently on V10j, but the problem persists.
Any help?
Click to expand...
Click to collapse
If you bought it from a store, get it exchanged for a new one.

actually works much faster on cm9, but therr still should be an optin to keep lcd on during call. i found some free apps that will disable hardware drivers but cant find the name of the proximity sensor driver, only that is named LGE.

Unfortunately it was given to us by a friend after my wife lost her Captivate, so taking it to a store to exchange is probably not going to work too well. As far as I can tell it was never used before we got it--the battery was still in it's own sealed pouch, the texting and driving warning was on the phone, and the phone went through the whole initial setup routine--but they didn't send us the box, I guess to cut down on mailing costs. I was hoping there was a known solution.

Ok, I downloaded two proximity sensor test apps today, but neither showed any activity. On my Captivate I get different readings with Proximity Sensor Finder (market link), but on the Nitro it is stuck at 3cm and it doesn't register anything no matter where I put my hand over the phone.
Can someone whose phone works right try installing this app and make sure that it picks up different readings on this device? OP, if you are still having issues, can you also try this app and see if it is static for you?
Thanks.

Took off the screen protector that they installed at the AT&T store and now the proximity sensor works just fine. OP, do you have a screen protector on your device?

we had an awfully thick one from att. we have since changed it to a super thin one. screen off is not a real problem on cm9, however i feel all devices should have the option to disable proximity sensor/keep lcd on during calls.

It's worth trying to use the warranty on the phone. Even though you dont have the original sales reciept, the phone has been released for less than a year, so no matter when you bought it, it is still within it's year long guaranteed warranty window.
Finished reading the thread, I suppose this post is now irrelevent

Proximity sensor seems to not work anymore

I first noticed it when the screen didn't black out during a call. Then I downloaded an app which checks if there is a proximity sensor and the distance it reports. According to the app, the last distance reported is 5 centimeters and it doesn't change at all when I obstruct the sensor. That makes me pretty sure that it stopped working. What can I do now?

Oliie23 said:
I first noticed it when the screen didn't black out during a call. Then I downloaded an app which checks if there is a proximity sensor and the distance it reports. According to the app, the last distance reported is 5 centimeters and it doesn't change at all when I obstruct the sensor. That makes me pretty sure that it stopped working. What can I do now?
Click to expand...
Click to collapse
If its anything like mine, you'll start getting some even weirder behavior. When I would answer a phone call (or place one), the proximity sensor wouldn't work and the phone would reboot itself within 5-10 seconds.
I downloaded an app called "Hardware Disabler" which allows you to disable the proximity sensor on the Gnex (its the one labeled 4-0044). It works for me...only annoyance is having to turn my screen off/on during phone calls manually. But, its better than having no phone (i.e. soft reboots).
Anyway, to answer your question, i'm not sure there's much you can do (other than disable). I've read that the proximity sensors on these GNex's are a little buggy.

My Nexus Reboot During Call once in day too !
maybe my reboot problem is Proximity sensor ?
change my simcard and factory reset not solve my problem .

I have had this issue. Do you use a ROM with the active display feature? A lot of ROMs have been including this lately. I feel like my issue started when they added that. It has a "Pocket Mode" option that uses the proximity sensor and I've always felt like it messed up my proximity sensor during calls. I never had reboots but the screen would flicker on and off during a call. Sometimes just staying on. I have turned Active display off all together and sometimes it will work right and sometimes it will flicker. But for me, it seems to have started when ROMs started including that feature.

I'm just gonna go ahead an suggest the obvious, flash another ROM. Even stock if you aren't running it just to get collective results, this way you can eliminate the ROM factor.

amir-kia said:
My Nexus Reboot During Call once in day too !
maybe my reboot problem is Proximity sensor ?
change my simcard and factory reset not solve my problem .
Click to expand...
Click to collapse
It sometimes does it for me too, but it's very very rare. Sometimes the phone just freezes during a call (when swipe to take the call).

iLeopard said:
I'm just gonna go ahead an suggest the obvious, flash another ROM. Even stock if you aren't running it just to get collective results, this way you can eliminate the ROM factor.
Click to expand...
Click to collapse
Can't speak for others, but I tried everything that could be tried. Flashed different Roms, kernels, and even went back to stock using the images provided by Google. Nothing fixed it until I realized it was a hardware issue. I haven't had a single problem since disabling that sensor.
EDIT: also, to clarify, it wasn't an intermittent problem for me. I could NEVER make/receive calls until I disabled that sensor.
Sent from my Galaxy Nexus using xda app-developers app

Flash Catalism rom and disable Proximity sensor solve my reboot incall problem !

Unable to make or take calls properly on CM11

Please refer to this post:
http://forum.xda-developers.com/showpost.php?p=62828995&postcount=1432
Has anyone gotten this problem? The person who posted this has been the only one having this problem. This can't be a rare thing, is it? Is everyone just dealing with this issue until it gets fixed?

Here is a compilation of the comments made about this issue thus far. There seems to be a consensus that screen protectors are not causing this issue.
11th August 2015
AnotherContributor said:
One issue though I've been having is that when I'm making and receiving calls, sometimes the phone display goes black and will frankly not come back on. I press the App button and sometimes the display comes on, sends the call to the Status Bar, and the screen goes dark. So, I have to press the Application button again and draw down the menu to hang the call up. When I press the power button, the screen flashes on for maybe a quarter second then goes dark. It keeps doing that every time you press the power button. The worst case scenario that has happened a handful of times is that when I'm in a call, neither the power nor application button are responsive. When that happens, pretty much the only option is to power down the phone and reboot.
...
I'm not sure if I would be able to dial an extension with the way the phone is acting up. I feel like this was not an issue the first couple of weeks I had CM on the phone. Now, it seems to be happening with every call.
Click to expand...
Click to collapse
14th September 2015
samuraix21 said:
Hi, I have this issue. Were you able to fix this issue? You're the ONLY person that has posted this issue so I'm not sure if this is a rare hardware issue or everyone on this forum is somehow dealing with it until a fix comes up.
Click to expand...
Click to collapse
19th September 2015
hawk1500 said:
are people still experiencing the screen off during call problem? I am not talking about when you put it up to your face, but how the screen turns off and won't come back on?
Click to expand...
Click to collapse
20th September 2015
hawk1500 said:
Naw, no screen protector installed. tried the proximity sensor fix app as well as the xposed don't go to sleep during call module but it still does it.
Click to expand...
Click to collapse
20th September 2015
tonochito said:
i think that bugs should be listed more detailed:
front facing camera does not work well, if i want to take a selfie it crash. video camera also does not work equal it will crash. I had to install Google Camera and Open Camera in order to have both selfie and video options working, With Google Camera i take selfies and with Open Camera i record videos, As the guy talking about the scren off in calls is true, i don't have a screen protector and it has this behaivour, also as i mentioned there is kind of lag when i try to dial a number i have to do twice, it doesn't show up right away. The same goes when i am calling for example my carrier and i have to dial on the IVR i have to dial twice in order to get the dial keypad. I didn't have Google play crash.
Another thing that i notice was setting a wallpaper as screensaver does not fit in the middle or correctly i had to use Quick Pic and the option 768x1280 because with the stock gallery wallpapers are like aside of the middle
Click to expand...
Click to collapse

I think this issue needs some attention. I am having this problem as well (with and without screen protector). There are times that I need to enter extensions and codes during calls which has become impossible. I have two of these phones and they both behave this way. I recommend that people start posting screenshots of the app Proximity Sensor Finder which displays different distance numbers detected by the prox sensor. See my screenshot attachment which shows the proximity sensor always detecting a "covered" state of 0.0cm even when nothing is in front of the screen. Everyone should go try this and post their findings.
Other phones on CM11 were able to fix this problem in the past by adjusting the calibration which is unique for each phone, so I started searching around through the Fire Phone CM11 files and I found these:
/system/etc/permissions/android.hardware.sensor.proximity.xml
I could not discern anything of value from this .xml file.
/persist/sensor_calibration/SHCAL_DU20060142640727.csv
This file seemed promising. Its timestamp is back in 2014 so I assume that this comes straight from the original Fire Phone files. If this file is actively used to govern sensor behavior, I'm wondering if perhaps it is not being read correctly. It makes me wonder if there is a log out there somewhere that could shed more light on it. Anyways, you can open up that badboy in any spreadsheet to discover sensor IDs for a bunch of sensors along with calibration coefficients in the form of:
SENSOR_TYPE=PROX SENSOR_ID=SI1143 SENSOR_REF=4CCU1 COEFF0=550.30
SENSOR_TYPE=PROX SENSOR_ID=SI1143 SENSOR_REF=4CCU1 COEFF0=395.62
SENSOR_TYPE=PROX SENSOR_ID=SI1143 SENSOR_REF=4CCU1 COEFF0=19262.26
You'll have to open it and analyze it in context of the other columns and other sensors. I've attached it (re-saved in xlsx format because .csv files are not permitted - if you don't trust my xlsx just retrieve the file from your phone). I highlighted the rows of interest. We could just mess with coefficient values, but without any guidance, it could just be a waste of time. Plus we don't know if this even governs the sensors or if it's just helpful documentation. If anyone has insight about this or even far fetched theories, please comment!
I'm thinking about doing a 'grep' on the entire file tree for some of these key words like SENSOR_ID=SI1143, SI1143, 4CCU1, COEFF0, SENSOR_TYPE=PROX etc etc - to see if any files use any of these terms. It may prove unfruitful due to the amount of compiled software that is no longer in text form. Any thoughts about any of this?

i have this screen always making a call with any cm11 i have used in the past, i have to press back and again the keypad and works normal, same when i have to dial a number

tonochito said:
i have this screen always making a call with any cm11 i have used in the past, i have to press back and again the keypad and works normal, same when i have to dial a number
Click to expand...
Click to collapse
But if the prox sensor is always detecting a "covered" state, then it completely disables the screen during a call and we are unable to press "back". Could you post your findings from running Proximity Sensor Finder from CM11 Fire Phone?

jdmillard said:
But if the prox sensor is always detecting a "covered" state, then it completely disables the screen during a call and we are unable to press "back". Could you post your findings from running Proximity Sensor Finder from CM11 Fire Phone?
Click to expand...
Click to collapse
i will give a shot, and post my result

In fact, it would be AWESOME if we could get someone (whose screen does behave perfectly during calls) to post their findings from Proximity Sensor Finder. If their screen works perfectly during calls and this app shows 0.0cm all the time for them too, then we can conclude that this app isn't functioning correctly and we know we need to find our root cause elsewhere.

tonochito said:
i will give a shot, and post my result
Click to expand...
Click to collapse
Available but why it doesn't work right?

tonochito said:
Available but why it doesn't work right?
Click to expand...
Click to collapse
Interesting. Is it stuck on 10.00061 even when you cover the front of your phone with your hand? Or does the number fluctuate?
Which ROM build are you on? (I should say, which publish date?)

jdmillard said:
Interesting. Is it stuck on 10.00061 even when you cover the front of your phone with your hand? Or does the number fluctuate?
Which ROM build are you on? (I should say, which publish date?)
Click to expand...
Click to collapse
yes weird it is stuck no matter what i do, well if i put my finger in the "first camera" of the phoen it goes to zero

tonochito said:
yes weird it is stuck no matter what i do, well if i put my finger in the "first camera" of the phoen it goes to zero
Click to expand...
Click to collapse
That suggests to me that the sensor is "all or none" meaning it doesn't bother detecting intermediate values, rather it just has a threshold that determines a covered or not covered state. That seems normal to me. I need to get mine to do that.
Does your screen behave normally during calls? Specifically, does the screen turn on when you pull the phone away from your face?

jdmillard said:
That suggests to me that the sensor is "all or none" meaning it doesn't bother detecting intermediate values, rather it just has a threshold that determines a covered or not covered state. That seems normal to me. I need to get mine to do that.
Does your screen behave normally during calls? Specifically, does the screen turn on when you pull the phone away from your face?
Click to expand...
Click to collapse
Not always as some users says it sometimes goes black, or i have notice that the notification bar sometimes goes down by itself and the annoying problem of the keypad on calls

I just removed my glass screen protector and now mine behaves just as yours. Which is good that it functions as expected, but also a disappointment about the screen protector. I just looked to request a refund and it appears that they have an excellent return policy so I'm not too worried about it. Now I just need to find a screen protector that doesn't cover the prox sensor. ... sigh.
I'm still interested to see what happens with what you were describing: like how the screen would still behave finicky. I'll keep an eye out for that behavior and I'll let you know if I discover anything about it.
---------- Post added at 01:26 PM ---------- Previous post was at 12:38 PM ----------
tonochito said:
Not always as some users says it sometimes goes black, or i have notice that the notification bar sometimes goes down by itself and the annoying problem of the keypad on calls
Click to expand...
Click to collapse
I forgot to say thanks! You posting your results helped me figure out where I was going wrong. Gracias!

jdmillard said:
I just removed my glass screen protector and now mine behaves just as yours. Which is good that it functions as expected, but also a disappointment about the screen protector. I just looked to request a refund and it appears that they have an excellent return policy so I'm not too worried about it. Now I just need to find a screen protector that doesn't cover the prox sensor. ... sigh.
I'm still interested to see what happens with what you were describing: like how the screen would still behave finicky. I'll keep an eye out for that behavior and I'll let you know if I discover anything about it.
---------- Post added at 01:26 PM ---------- Previous post was at 12:38 PM ----------
I forgot to say thanks! You posting your results helped me figure out where I was going wrong. Gracias!
Click to expand...
Click to collapse
your welcome

I have a glass protector and i noticed over time that i developed a specific technique for answering the phone. I sort of slowly move it close to my ear and then the sound comes on (hear ringing, able to hear caller). If i press the answer button then put it to my ear, most of the time i cant hear the caller but they CAN hear me.
Never even considered it being a sensor issue. I thought it was CM bug triggered by my setup somehow. I flashed this rom and put the glass screen on within a couple of days after receiving it in the mail and since touch-wise the tempered glass works perfectly it was never even a thought. Dont mean to go on but is anyone else dealing with issues like the one i describe? Whats strange is i dont recall having that black screen issue others are experiencing.

KLit75 said:
I have a glass protector and i noticed over time that i developed a specific technique for answering the phone. I sort of slowly move it close to my ear and then the sound comes on (hear ringing, able to hear caller). If i press the answer button then put it to my ear, most of the time i cant hear the caller but they CAN hear me.
Never even considered it being a sensor issue. I thought it was CM bug triggered by my setup somehow. I flashed this rom and put the glass screen on within a couple of days after receiving it in the mail and since touch-wise the tempered glass works perfectly it was never even a thought. Dont mean to go on but is anyone else dealing with issues like the one i describe? Whats strange is i dont recall having that black screen issue others are experiencing.
Click to expand...
Click to collapse
I was lucky enough to have a good return policy on the glass screen protectors I recently got (for two Fire Phones). I'm returning them today and I've already ordered this as a replacement:
http://www.amazon.com/gp/product/B00WXY18WK?psc=1&redirect=true&ref_=od_aui_detailpages00
It has excellent reviews, decent price, very thin, and it is specifically mentioned many times in the reviews that there is a little cutout for the prox sensor (and you can see if if you look carefully at the pictures). I'm hoping that it will solve my black screen woes and protect my screen. There are reports from folks on these forums saying that there is still some strange behavior during calls (such as your example among others). I personally haven't encountered what you're describing, but I'll keep an eye out to see if I can be of any help.

jdmillard said:
Here is a compilation of the comments made about this issue thus far. There seems to be a consensus that screen protectors are not causing this issue.
11th August 2015
14th September 2015
19th September 2015
20th September 2015
20th September 2015
Click to expand...
Click to collapse
Hi. I like to get back about this since I've been quoted on this.
For me, the glass protector screen that I brought from XtremeGuard was the issue my dad had when he tried to make or take calls. After I removed it, it was back to normal.
The persistent issues now, based on what my dad is telling me, is that sometimes after you dial in a number and call a person, you don't hear the ringing tone to know if it went through or not. My dad would freak out when someone on the other line said something since the ringing tone is not working.

tonochito said:
Not always as some users says it sometimes goes black, or i have notice that the notification bar sometimes goes down by itself and the annoying problem of the keypad on calls
Click to expand...
Click to collapse
hi
this is usually related to hardware composer.
cheers

superdragonpt said:
hi
this is usually related to hardware composer.
cheers
Click to expand...
Click to collapse
but why? does it matter with the bootloader, i mean i know the CM11 on the Fire phone still on beta with no NFC working and the camera too at least i am using Snap camera and everything works. But making calls is a bit annoying even i don't use the phone to make a lot of calls just for WhatsApp almost all the time

Proximity sensor/pocket dial protection

I have been using my 3a xl for a couple weeks and very happy overall with the speed and performance. I am having one issue trying to overcome that's very disappointing. I do a lot of of walking with my phone in my pocket. When ever I get a call or notification while my phone is in any of my pockets it will either answer it or because it's moving around it will go thru the menus etc. Even if I don't pull my phone out it will always do this. The pocket dial/proximity programming is not good. If you test the prox sensor by covering it up you can open, unlock, make calls etc. with it covered. I am coming from a LeMax 2 and never ever had a single problem with that phone. It had a setting in there and wouldn't allow you to accidently open, unlock, do anything if the sensor was covered. Does anyone have any workarounds for this or insight. I should be able to carry it in my pocket without it doing this. Thanks for any input.

You must have a detective prox sensor or something else is not working correctly with your phone. When I cover my prox sensor (with my hand or in my pocket) the screen does not come on for notifications, calls, or when I tap to wake.

When I cover prox sensor and unlock phone with fingerprint the screen comes on too. Does yours do that as well?

retrov said:
When I cover prox sensor and unlock phone with fingerprint the screen comes on too. Does yours do that as well?
Click to expand...
Click to collapse
Yes

I just tested my phone today and my screen does wake for incoming calls even when the prox sensor is covered.
This is very annoying.
It does not wake for notifications.

Very annoying for me as well. I guess it's the software program. With that sensor covered like in your pocket it shouldn't allow that to happen. Thanks for letting me know at least I know my phone isn't defective.

My wife's Moto X4 behaves the same way.
If you want, you can install Xposed and GravityBox, it has an option to use the proximity sensor when deciding to wake the decide (see attached screenshot). It will keep the screen off for incoming calls when the sensor is covered.

creeve4 said:
My wife's Moto X4 behaves the same way.
If you want, you can install Xposed and GravityBox, it has an option to use the proximity sensor when deciding to wake the decide (see attached screenshot). It will keep the screen off for incoming calls when the sensor is covered.
Click to expand...
Click to collapse
I thought Xposed wasn't available for Pie except through some unofficial closed source buggy Magisk extensions. Are you running that? I'm not sure I trust closed source on a rooted phone....

duh1 said:
I thought Xposed wasn't available for Pie except through some unofficial closed source buggy Magisk extensions. Are you running that? I'm not sure I trust closed source on a rooted phone....
Click to expand...
Click to collapse
It's all open source now. I have not experienced any bugs, it's working really well for me.
Search the magisk repo for Riru - Exposed. I use the sandhook variant. You can find links to more information in the module description.
GravityBox Pie has a thread on XDA.

retrov said:
With that sensor covered like in your pocket it shouldn't allow that to happen. Thanks for letting me know at least I know my phone isn't defective.
Click to expand...
Click to collapse
Sounds like an annoying bug to me as well.
Google / Pixel has a bug reporting system...
https://support.google.com/pixelphone/answer/6398243/
If we all submit reports, hopefully they'll take notice and the issue will be fixed in an update...

Just submitted a report on the issue. Thanks

Try the gravity screen app & see if it fixes your issues. I use it & the phone doesn't wake in my pocket for text notifications - but I'm not sure how it will respond to phone calls/notifications; it has options for proximity sensor & a "pocket sensor" feature as well.

retrov said:
Just submitted a report on the issue. Thanks
Click to expand...
Click to collapse
If we want this bug fixed in future updates, everyone should send in a report, especially with Google, squeeky wheel gets their attention...

Anyone that has a pixel 3a 3axl please submit a report on this issue.

My Pixel 3a ja behaving the same way. Coming from a OnePlus 5 with a splendid pocket mode this phone is really getting on my nerves. I love everything about this phone but the constant pocket answering is really bad. Thinking about stop using it...
I've tried every app in Play named pocket mode but nothing seems to work properly.

I've submitted feedback report a couple times hopefully everyone on here can do the same. Won't get fixed until they update on there end. That's the only bad thing I don't like about this phone so far.

Sent.
FYI - for others looking to do this, you file the report under your phone's Settings/About Phone/"Send feedback about this device"

My biggest issue isn't answering in my pocket, but when it's ringing and I pull it out of my pocket, it will see a swipe down action this rejecting the call... Happens to me at least once a day. I really hope this is fixed in Android 10 next week.

acejavelin said:
My biggest issue isn't answering in my pocket, but when it's ringing and I pull it out of my pocket, it will see a swipe down action this rejecting the call... Happens to me at least once a day. I really hope this is fixed in Android 10 next week.
Click to expand...
Click to collapse
Android 10 didn't fix this. I really hate Google right now.

I keep my current N6 phone in a wallet like case with a front cover. Do you guys think that might help?