[ROM] Android GB 2.3.4 - Droid Pro (not Verizon)- link - Droid Pro Android Development

Looking around i´ve found this ROM:
Check this page:
http://www.grupoandroid.com/topic/33678-pro-xt610-firmware-personal-gingerbread-234/
it´s a GSM southamerican version -(european/chinese compatible version?).
Android 2.3.4 --- Blur_Version.45.2.90.XT610.Personal.en.AR
file: p3_venus2_umts_venus2_latam-user-2.3.4-4.5.2-51-110822-release-keys-signed-Personal-AR.sbf.gz
...Testing.

Thanks.. let me know how it is and how it compares to Apex or CM7...

Its a sbf that fails to flash with rds lite
Sent from my MB525 using xda premium

please provide link for download the file

why fails to flash with rds lite

why fails to flash with rds lite

why fails to flash with rds lite

Says that is missing signatures
Sent from my MB525 using xda premium

why fails to flash with rds lite

2.3.4 is not the best version for an upgrade, it has some bugs like the birthday bug - versions above or below 2.3.4 are a better choice

Ok, but for the Latin xt610 there is yet no working sbf so 2.3.4 would still be pretty good. If anyone got access to them post please!
Sent from my MB525 using xda premium

why fails to flash with rds lite

aymanfoa said:
why fails to flash with rds lite
Click to expand...
Click to collapse
Do not keep posting and spamming the board.

Hello,
who knows where this file exist for download:
p3_venus2_umts_venus2_latam-user-2.3.4-4.5.2-51-110822-release-keys-signed-Personal-AR.sbf.gz
cheers

so, now i have this sbf file ...
Now when i tried flashing it with
"p3_venus2_umts_venus2_latam-user-2.3.4-4.5.2-51-110822-release-keys-signed-Personal-AR.sbf"
with RSD Lite i got this error, the flashing fails n my phone goes back as previous:
Failed flashing process. Phone[0000]: Flashing an unsigned superfile to a productions phone is not allowed. (0x7074); phone connected
I try RDS Lite version 4.9, 5.4.4 and 5.6
What can i do ? Where is the trick ?
cheers

i have an european droid pro with android 2.2.2
so this version work?
can someone explane things to do to install a custom rom in this phone?

Related

[ROM][2.2.1][Official] i9000 ZSJPG for Hong Kong (Asia) [with download link]

ZSJPG (first android 2.2.1 for hong kong) is released via Kies on 24 Feb 2011
put the file on odin pda (uncheck repartition) to flash it, no pits required.
PDA/PHONE/CSC: JPG/JPG/JPG
Build date: 8 Feb 2011
download link HERE
ZSJPG modem: download HERE
may not be rooted (superuser not working) as some users reported
speedmod can still flash over it but not everyone can apply tweaks as users reported
speed like JS5, lag-free without lagfix
Cool, really want to try new radio. Can anyone make CWM flashable?
languages ?
dadyal said:
languages ?
Click to expand...
Click to collapse
English (UK), English (US), Korean, Traditional Chinese (HK), Simplified Chinese, Traditional Chinese
Hm, JPY/JS3/JS5 should be greater than JPG (in terms of version number)?! So imo it should be useless.
vinceyeung said:
ZSJPG (first android 2.2.1 for hong kong) is released via Kies.
put the file on odin pda to flash it, no pits required.
PDA/MODEM/CSC: JPG/JPG/JPG
download link
Click to expand...
Click to collapse
vinceyeung,
Thanks for sharing.
Is it rootable?
ZSJPE (previous radio from HK rom) is my choice for a really good battery life and nice reception, so really hoping for another hit with this ZSJPG.
+ built date 8th Feb (latest of all available now I guess
tzyn said:
Hm, JPY/JS3/JS5 should be greater than JPG (in terms of version number)?! So imo it should be useless.
Click to expand...
Click to collapse
tzyn,
Dated Feb 8th, 2011. For the TGY market, at least, this official I9000 ZS firmware is new.
Will give a try but i think modem only with XWJS5
howipig said:
vinceyeung,
Thanks for sharing.
Is it rootable?
Click to expand...
Click to collapse
yes, and also u can use speedmod k13c as well
can someone tell me if this one is faster than XWJS5?
where can i find only the modem file? Can somebody make a modem file to flash with Cwm
Thanks
tzyn said:
Hm, JPY/JS3/JS5 should be greater than JPG (in terms of version number)?! So imo it should be useless.
Click to expand...
Click to collapse
Perhaps for you, but not for the users in East Asia.
Sent from my GT-I9000 using XDA App
Thanks bro, I previously flash my rom to js5 (Docrom), is your flash method suitable and safe for me?
ihmcjacky said:
Thanks bro, I previously flash my rom to js5 (Docrom), is your flash method suitable and safe for me?
Click to expand...
Click to collapse
it uses 803pit as js5 do, should have no problem
I'm on js5 with 512.pit, works fine.
Sent from my GT-I9000 using XDA App
vinceyeung said:
yes, and also u can use speedmod k13c as well
Click to expand...
Click to collapse
vinceyenung,
But I keep getting NAND lock message... until I flash the kernel with your suggestion. Thanks again
I flashed my phone with ZSJPG, Ver 2.2.1
Very Very Smooth, No Lag, BenchMark=1100,1115,1125. Its better Than JPY. But same as JS5
Use Odin
Just select the PDA file, Do not check the Re-partation. Works perfectly.
Browser still have problem Squre box shows up while Zoom in & out.
Same Problem with JPY,JS3 & JS5
fail to root
failed to root with z4root, i know i can deal with it by flashing speedmod through obins, but i need to back up the stock kernel
a1030bw said:
failed to root with z4root, i know i can deal with it by flashing speedmod through obins, but i need to back up the stock kernel
Click to expand...
Click to collapse
Use sgs kernel flasher, no odin and you can backup the kernel.
Sent from my GT-I9000 using XDA App

[Q] help out a newbie..

hi all
i was just after a little advice as a newbie here...ive got a rooted defy with a 2.2.1 uk rom and want to put 2.2.2 uk official rom on.do i just simply need to flash the new rom with rsdlite?.also the rom has a .sbf.gz file extension..do i just remove the .gz?
thanks for any help..
scottie
There's no big difference between 2.2.1 and 2.2.2. If you have red lens defy you can flash 2.3.4. It's awesome
sent from my MotoDefy
If It's .gz just extract it with WINRAR.
Sent from my MB525 using XDA App
U just use cm7 2.3.4 .......
I LIKE MY DEFY and i m sure that i ll keep it for atleast 3 years.....After 3 years a lot of phones would have come and there may be a lot of additional feaures......There may be virtual Retinal tech...i m not sure of the name ............can anyone tell me what features would have come????
thanks for the replies..am having troubles extracting the image file..winrar just gives me an error when i try to extract it..grr
i dont know if its a corrupt download any chance someone could upload another version?
http://forum.xda-developers.com/showthread.php?t=1126907
downloaded again managed to unrar...flashed using rsd lite..now running 2.2.2..yay...now to reroot and then look at 2.3.4
scottie1973 said:
downloaded again managed to unrar...flashed using rsd lite..now running 2.2.2..yay...now to reroot and then look at 2.3.4
Click to expand...
Click to collapse
Nice one pleased you got sorted.
I've got the sbf saved in RDS Lite just in case I need to send off for a warranty fix
Which 2.3.4 version you going to try - I'm running Quarx' CM7 with the Nordic sbf as a base & it's really very good. It runs much better than when my phone was on eclair & better than when I flashed froyo
thanks sp8y i'm just browsing the 2.3.4's at the moment..but the one u mentioned seems to be pretty stable

Defy bricked

Hi everybody!
Two weeks ago I installed the last nightly of CyanogenMod (android 2.3.7).
It worked correctly, but last night, i dont know why my defy was bricked and I couldn´t run clockworkmod...
Now I'm trying to repair it using RSDLite but any sbf version can resolve my problem
HELP PLEASE!
Thanks a lot
Anyone can help me?
msalcedo said:
Hi everybody!
Now I'm trying to repair it using RSDLite but any sbf version can resolve my problem
HELP PLEASE!
Thanks a lot
Click to expand...
Click to collapse
What do you mean with "any sbf version can resolve my problem"? Is RSDLite working and successfully installing a clean Motorola software?
Arjoma said:
What do you mean with "any sbf version can resolve my problem"? Is RSDLite working and successfully installing a clean Motorola software?
Click to expand...
Click to collapse
I said that because I have tryed to restore my defy with this files
JRDNEM_U3_2.21.0
JRDNEM_U3_2.51.1
JRDNEM_U3_2.34.1
And my motorola is already dead. RSDLite can´t restore it.
I think that's why I had installed android 2.3.7
Thanks for your reply!
what was your base;
if it was the 179.02 CEE, or nordic, these should flash with RSD
pificos said:
what was your base;
if it was the 179.02 CEE, or nordic, these should flash with RSD
Click to expand...
Click to collapse
Mine was CEE.
I have just read in a forum that when you flash with RSD you cant downgrade.
So I need a ROM witch version must be android 2.3.7 or higher... that exists??
Thanks!
just flash 179 CEE
Yes! You were right.
Thank you so much!

Little rom for european Pro user (qwerty) and Original Rom for European pro

With clockword mod (2.5.0.8) and bootstrap for droid2, you can install this nandroid backup
send me a private message
Backup your rom before....
It's a original froyo rom without a lot of stuff..
you can try...
Original eu Nandroid backup:
send me a private message
What version of Android? 2.3?
die_dmitriy said:
What version of Android? 2.3?
Click to expand...
Click to collapse
2.2! We don't have 2.3...
dettofatto said:
2.2! We don't have 2.3...
Click to expand...
Click to collapse
Not tried it flashed on Verizon droid pro?
i tried to flash my motorola droid pro version to Android 2.3.6 ---- Blur_Version.0.22.2.XT610.Personal.en.AR and now the mobile stuck a code corrept. can i use RSD Lite with the back files mentioined up to go back to the original mobile software and how
die_dmitriy said:
Not tried it flashed on Verizon droid pro?
Click to expand...
Click to collapse
Yes.. But i've seen only a boot loop...
i tried to flash my motorola droid pro version to Android 2.3.6 ---- Blur_Version.0.22.2.XT610.Personal.en.AR and now the mobile stuck a code corrept. can i use RSD Lite with the back files mentioined up to go back to the original mobile software and how

MIUI V5 port for G Pro

This is the rom i collected from China.
I work perfectly with some small bugs.
This is the link.
http://pan.baidu.com/s/1ABidq
After flash rom, please flash baseband below for your G Pro.
This is for F240S/L/K/E98x. However, i've not baseband for other like E986...
Here the link of forum: http://www.sonyue.com/bbs/forum.php?mod=viewthread&tid=59526&extra=page=1
There are some pictures:
Update:
The new version: MIUI 3.10.22
Link rom:http://miuirom.xiaomi.com/rom/u10091389/3.10.22/miui_gpro_ws008_3.10.22_43f1e698f0_4.2.zip
Link baseband: http://pan.baidu.com/share/link?shareid=3572836139&uk=1392791443#dir/path=/f240/V5/kernel_1022
The new version: MIUI 3.10.25
Link rom: http://miuirom.xiaomi.com/rom/u10091389/3.10.22/miui_gpro_ws008_3.10.22_43f1e698f0_4.2.zip
Link kernel:
f240s http://url.cn/QocR6Y
f240l http://url.cn/IsK4v4
f240k http://url.cn/Nifni6
e988 http://url.cn/UCsRE1
e980 http://url.cn/Vtau9J
Fix for statusbar: go to setting/developer options, untick "show corner", reboot
New version: MIUI V5 3.11.1. (Can update via OTA)
http://pan.baidu.com/s/1ACKSS
New version: MIUI V5 3.11.3. Update via OTA.
58 Tips You Should Know About MIUI V5 : http://en.miui.com/thread-4409-1-1.html
New version: MIUI V5 3.11.10. Update via OTA.
New version: MIUI V5 3.11.17. Update via OTA or link for rom: http://miuirom.xiaomi.com/rom/u10091389/3.11.17/miui_gpro_ws008_3.11.17_1c31a3ae23_4.2.zip
New version: MIUI V5 3.11.22. Update via OTA or http://miuirom.xiaomi.com/rom/u10091389/3.11.22/miui_gpro_ws008_3.11.22_3d2dae14f3_4.2.zip
New version: MIUI V5 3.11.29. Update via OTA or http://miuirom.xiaomi.com/rom/u10091389/3.11.29/miui_gpro_ws008_3.11.29_bacd788a43_4.2.zip
Anyone want to try this on the e980? I would but I don't have insurance
manhktqd said:
This is the rom i collected from China.
I work perfectly with some small bugs.
This is the link.
http://pan.baidu.com/s/1ABidq
There are some pictures:
Click to expand...
Click to collapse
What model are you running it on?
_________________
Beavers & Ducks!
What bugs?
Can you share the original link?
enviado desde el LG - E980
manhktqd said:
This is the rom i collected from China.
I work perfectly with some small bugs.
This is the link.
http://pan.baidu.com/s/1ABidq
After flash rom, please flash baseband below for your G Pro.
This is for F240S/L/K/E98x. However, i've not baseband for other like E986...
There are some pictures:
Click to expand...
Click to collapse
No go for the e980. JUst sat there at the LG screen, which makes me think the flash actually didnt happen since I know MIUI has its own splash screen. What did I do wrong? I was coming from CM10.2, full wipe and format system before flashing the zip then the baseband...assistance anyone.
jimi_pooh said:
No go for the e980. JUst sat there at the LG screen, which makes me think the flash actually didnt happen since I know MIUI has its own splash screen. What did I do wrong? I was coming from CM10.2, full wipe and format system before flashing the zip then the baseband...assistance anyone.
Click to expand...
Click to collapse
Same for me, I was coming from the stock based G2 rom. Just sits at LG logo. Let us know if anyone with a 980 has any luck!
razgriz8426 said:
Same for me, I was coming from the stock based G2 rom. Just sits at LG logo. Let us know if anyone with a 980 has any luck!
Click to expand...
Click to collapse
Here the link of forum: http://www.sonyue.com/bbs/thread-59526-1-1.html
manhktqd said:
Here the link of forum: http://www.sonyue.com/bbs/thread-59526-1-1.html
Click to expand...
Click to collapse
Omg...
Does anyone speak Chinese?
enviado desde el LG - E980
brunozq said:
Omg...
Does anyone speak Chinese?
enviado desde el LG - E980
Click to expand...
Click to collapse
I even used Google translater and still no help
Sent from my LG-E988 using xda app-developers app
Working
:victory::victory::victory:
Working. no gapps though. playing around to find bugs.....
P.S. I have Indian E988.
FINALLY MIUI.....
UPDATE 1 : Found a bug. The notification drawer flickers sometimes when in the pulled down state.
UPDATE 2 : The capacitive key vibration is not working.
UPDATE 3 : Flashed Latest GAPPS from goo.im and all google services works. while setting up the google account, settings will FC a couple of times. after that its good to go.
Also, crazy battery drain. 20% lost with 30 minutes of screen on with cpu at 1.3 ghz (General playing around with the rom, no games etc.).
manhktqd said:
After flash rom, please flash baseband below for your G Pro.
This is for F240S/L/K/E98x. However, i've not baseband for other like E986...
Click to expand...
Click to collapse
Is there anything special about the Radios included in your post?
manhktqd said:
This is the rom i collected from China.
I work perfectly with some small bugs.
This is the link.
http://pan.baidu.com/s/1ABidq
After flash rom, please flash baseband below for your G Pro.
This is for F240S/L/K/E98x. However, i've not baseband for other like E986...
Here the link of forum: http://www.sonyue.com/bbs/thread-59526-1-1.html
There are some pictures:
Click to expand...
Click to collapse
flash baseband is not flash radio. its just a kernel package refer to sutable baseband.
Sent from my LG-E980 using XDA Premium 4 mobile app
New update in OP.
A e986 baseband?
Finally Got it working!
For the e980 users. Grab the latest MIUI Rom for the OP and the e980 baseband(kernel) AND the e908 Modem from Madmack....I use CWM...Full wipe (Factory Reset/Cache/Davilik too. Flash MIUI, flash the Baseband(kernel) then flash the Modem. GAPPS is included in the ROM.
Still testing and will let you know what bugs i find. Good luck for those that like MIUI
I have just installed it!
if you want quickremote flash it -> http://downloads.codefi.re/madmack/GPRO/CM10_2/accessories/qremote-e980-cwm.zip
Any word on how it works and or battery life yet?
Sent from my LG-E980 using Tapatalk
i found a bug...
the status bar becomes crazy.
all the other things works fine for now.
nelsonator1982 said:
Any word on how it works and or battery life yet?
Sent from my LG-E980 using Tapatalk
Click to expand...
Click to collapse
Battery not bad but never sleeps. EVER
jimi_pooh said:
Battery not bad but never sleeps. EVER
Click to expand...
Click to collapse
you haven't problems with status bar?

Categories

Resources