Is it possible to overclock the CPU in this rom, if so, what is the right karnel ?
please like some sort instructions in this rom can tweak processor
Which kernel are you using at the moment?
And post in the correct section.
rasta312 said:
Is it possible to overclock the CPU in this room, if so, what is the right karnel ?
please like some sort instructions in this room can tweak processor
Click to expand...
Click to collapse
by "room" you mean "subforum" ??
gtrab said:
by "room" you mean "subforum" ??
Click to expand...
Click to collapse
I think he means ROM, not room.
Thank you so much already worked it out
Related
Question: Can I overclock my xperia play?
Answer: Yes
Deoxlar said:
I read that you can overclock it to 1.5ghz now
Sent from my R800i using XDA App
Click to expand...
Click to collapse
svenk919 said:
Yes, you need the kernel that comes with cm7 (if you want just the kernel and not cm7 you can still flash it, just download the pack in the cm7 thread and in the .bat file you have to run you must delete the middle two lines, save it and then run it. This will break the camera though).
Click to expand...
Click to collapse
I read that you can overclock it to 1.5ghz now
Sent from my R800i using XDA App
Deoxlar said:
I read that you can overclock it to 1.5ghz now
Sent from my R800i using XDA App
Click to expand...
Click to collapse
Yes, you need the kernel that comes with cm7 (if you want just the kernel and not cm7 you can still flash it, just download the pack in the cm7 thread and in the .bat file you have to run you must delete the middle two lines, save it and then run it. This will break the camera though).
svenk919 said:
Yes, you need the kernel that comes with cm7 (if you want just the kernel and not cm7 you can still flash it, just download the pack in the cm7 thread and in the .bat file you have to run you must delete the middle two lines, save it and then run it. This will break the camera though).
Click to expand...
Click to collapse
and touch pads. (currently)
The CM7 kernel won't boot standard ROMs, nor the other way around
Logseman said:
The CM7 kernel won't boot standard ROMs, nor the other way around
Click to expand...
Click to collapse
When I installed my system.img back-up over cm7 but left the cm7 boot.img there it still worked, except for some sd card problems I also had in cm7.
hello
how's about GPU ?
is there any way to overclock gpu?
thank you
excuse me if my question don't relate here!
Why is this in the development section, should be in questions.... jeezz we need a moderator
And no above, you can't overclock the GPU, just CPU but i think there both on the same die
sadegh1993 said:
hello
how's about GPU ?
is there any way to overclock gpu?
thank you
excuse me if my question don't relate here!
Click to expand...
Click to collapse
ff7fan4eva said:
Why is this in the development section, should be in questions.... jeezz we need a moderator
And no above, you can't overclock the GPU, just CPU but i think there both on the same die
Click to expand...
Click to collapse
you guys do realise this thread's last post was in JULY 2011 right? its now JANUARY 2012
i think i have just about tried every CM7 OC kernel out there but have not been able to find one specifically for my model or have i missed something.....
any ideas people?
thks
So far as I know, every CM7 rom is overclocked by default.
matt5eo said:
So far as I know, every CM7 rom is overclocked by default.
Click to expand...
Click to collapse
your correct sir but everytime i try to OC it freezes. just wondering if a seperate kernel was out there.
gentledroid17 said:
your correct sir but everytime i try to OC it freezes. just wondering if a seperate kernel was out there.
Click to expand...
Click to collapse
This is a know issues. Run the overclock with 787mhz. Some phones aren't able to run 806mhz. Hope it works for you.
any other way?
Hello guys I just want to ask what is the baseband of Creed's Rom v2 I want to install this rom but running latest Rom DXLE1 for my SGY anyone? please?
DDLC2
hitme987 said:
DDLC2
Click to expand...
Click to collapse
Thanks dude. Can i ask something? Merruk Kernel compatible with Creed's Rom v2? and if a2sd Compatible with it? Just want to know!
kevinzareno said:
Hello guys I just want to ask what is the baseband of Creed's Rom v2 I want to install this rom but running latest Rom DXLE1 for my SGY anyone? please?
Click to expand...
Click to collapse
it's based on DXKL2
it's ok to install it over stock rom DXLE1
your baseband will be the same= DXLE1 but your
pda and csc will downgrade to DXKL2
Oops my bad Leo is right I just checked it.
kevinzareno said:
Thanks dude. Can i ask something? Merruk Kernel compatible with Creed's Rom v2? and if a2sd Compatible with it? Just want to know!
Click to expand...
Click to collapse
yes, it is compatible to merruk pre 2.0 kernel
just don't use the ext4.zip
kevinzareno said:
Thanks dude. Can i ask something? Merruk Kernel compatible with Creed's Rom v2? and if a2sd Compatible with it? Just want to know!
Click to expand...
Click to collapse
Both a2sd and merruk kernel is compatible. You need to the a2sd darktremor.zip for the a2sd to work though.
hitme987 said:
Oops my bad Leo is right I just checked it.
Click to expand...
Click to collapse
off topic:
bro, what gov do you use?? that's uses all freqs..
performance:battery
ratio 60:40
any suggestions?? :highfive:
leodasal2 said:
off topic:
bro, what gov do you use?? that's uses all freqs..
performance:battery
ratio 60:40
any suggestions?? :highfive:
Click to expand...
Click to collapse
Offtopic:
Smartass v2 uses 2-3 frequencies and decreases/increases freq as per the load. It is the best performance with max power saving gov. It has quite good results in benchmarks in xda. Ondemand and interactivex are some others. Refer these threads, they are quite informative: (first ones enough)
http://forum.xda-developers.com/showthread.php?t=1555744
http://forum.xda-developers.com/showthread.php?t=1369817
A quote from the 1st thread.
Code:
#3 - The most power saving governor is Ondemand. If you need a high performance governor, use smartassV2, which offers some battery savings.
hitme987 said:
Offtopic:
Smartass v2 uses 2-3 frequencies and decreases/increases freq as per the load. It is the best performance with max power saving gov. It has quite good results in benchmarks in xda. Ondemand and interactivex are some others. Refer these threads, they are quite informative: (first ones enough)
http://forum.xda-developers.com/showthread.php?t=1555744
http://forum.xda-developers.com/showthread.php?t=1369817
A quote from the 1st thread.
Code:
#3 - The most power saving governor is Ondemand. If you need a high performance governor, use smartassV2, which offers some battery savings.
Click to expand...
Click to collapse
i'm using smartassV2..
thanks for the confirmation :good:
Hi..
Please anybody tell me how can I overclock my CPU
Is there any need for rooting my galaxy y or without rooting can i overclock it
Sorry for my bad english
Sent from my GT-S5360 using xda premium
its buggy no overclock is for SYG & once Again please use search before start a new thread & respect the Rule of XDA, Otherwise we have to use report button
tanjotsingh said:
Hi..
Please anybody tell me how can I overclock my CPU
Is there any need for rooting my galaxy y or without rooting can i overclock it
Sorry for my bad english
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
sorry,
no overclock,
and it will fry you phone if we had
tanjotsingh said:
Hi..
Please anybody tell me how can I overclock my CPU
Is there any need for rooting my galaxy y or without rooting can i overclock it
Sorry for my bad english
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Find a overclock kernel
Okay
maxsan20 said:
its buggy no overclock is for SYG & once Again please use search before start a new thread & respect the Rule of XDA, Otherwise we have to use report button
Click to expand...
Click to collapse
Sorry maxsan20,,, if you hearted with my post
and also thanks
thanks
deathnotice01 said:
sorry,
no overclock,
and it will fry you phone if we had
Click to expand...
Click to collapse
thanks for warning
Suggest please
hmahadi98 said:
Find a overclock kernel
Click to expand...
Click to collapse
will you please suggest me which of the kernel is best for my SGY
thanks
tanjotsingh said:
will you please suggest me which of the kernel is best for my SGY
thanks
Click to expand...
Click to collapse
I always use marruk kernel it's the best kernel for galaxy y or, try savie or kurotsug's kernel but those are not overclocked. Find them on dev section.
---------- Post added at 01:05 AM ---------- Previous post was at 12:46 AM ----------
tanjotsingh said:
will you please suggest me which of the kernel is best for my SGY
thanks
Click to expand...
Click to collapse
And if you really wanna overclock your cpu then go to CWM then wipe data and cache and install this file https://m.box.com/view_shared/4416a8124a843bb7d8df
download cpu master or no-frills cpu controll to manage frequency.
after overclocking your phone will run fast then before but your battery will drain fast then before and phone will be much hitted then before.:beer:
[and ofcourse you have to root your phone]
CMIIW but does Merruk Kernel available for OC? Cause I didn't know if Young could be overclocked..
Guys I really want a kernel so I can over clock it with set cpu can anyone send me a link to a good kernel?
felix787 said:
Guys I really want a kernel so I can over clock it with set cpu can anyone send me a link to a good kernel?
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=JmvCpR45LKA&feature=youtube_gdata_player
dynospectrum said:
https://www.youtube.com/watch?v=JmvCpR45LKA&feature=youtube_gdata_player
Click to expand...
Click to collapse
Because the threads that contain the kernels don't start with [KERNEL] and have no information such as as whether or not they can be overclocked, where to download, or how to flash in the OP.
Seriously though, find the threads in either Android Development or Original Android Development (can't make it too easy) that start with [KERNEL] and read the 1st post.