Hi!
This topic is about real ICS/JB development for Gio.
This topic is only for developing at this moment!
Please, keep this topic clear! I'll answer only for questions about developing or CM9/CM10 for Gio. About others, please write to me at PM!
Team:
Macław
marcin1147
Wayland_ACE
Special thanks:
phiexz
Squadzone
bagnz0r
tom3q
Thanks for all donators. Thanks to you we can provide frequent updates without any problems!
DOWNLOAD: CyanogenMod 10 beta1
You should make full wipe after installation, but there shouldn't be any problem if you're updating ICS to JB.
DOWNLOAD:
http://maclaw.pl/
NO MIRRORS!
What’s working:
RIL (full – GSM/SMS/EDGE/3G/SIGNAL etc)
Audio
Microphone
Small speaker
Sensors (strange issue with proximity)
Project Butter (100%)
Full 2D/3D acceleration
Touchscreen
SD card
Native Android app2sd (.android_secure)
WiFi
Bluetooth (really, really buggy)
Browser
Mass storage
Live wallpapers
GPS (people saying it working fast)
Deep sleep
YouTube
FM radio (as in CM9)
Headphones
What isn’t working:
Proximity
Camera
Changelog:
----beta1
small speaker fixed
microphone fixed
headsets are working (whole, 3/4 pin etc)
fixed videoplayback
new RIL – better stability
CM10 sources updates
Themes support
fixed native app2sd (.android_secure)
Macław’s libaudio (ported to JB by Wayland)
a lot of things, which I forgotten to mention
-----(pre)alpha1
We're introducing you first working release of Jelly Bean for our devices!
DOWNLOAD: CyanogenMod 9.1 RC2
I CAN USE EVERYDAY, BUT YOU SHOULD DO FULL CWM BACKUP BEFORE YOU FLASH IT!
INSTALL GUIDE:
Go there: http://forum.xda-developers.com/showpost.php?p=20743005&postcount=4
REMEMBER - DO FULL WIPE AFTER INSTALLATION!!!
SOURCES:
https://github.com/MaclawStudios
DOWNLOAD:
http://maclaw.pl/
NO MIRRORS!!!
Working:
boot
GSM (phone/messages/GPRS/EDGE/3G)
Wifi
Bluetooth
HW acceleration (full)
Sound
Headphones
GPS
All sensors (proximity, roration etc)
CyanogenMod settings (not all, it's not fully merged by CyanogenMod team, not my fault)
Market (now you can download all apps available for Gio with GB)
Fixed animations (now it looks so good)
Facebook sync
Buttons backlight
BLN support
GMail fully works
Browser fully works
ICS keyboard
Games - works as smoothly as on Gingerbread
YouTube
Camera - only photos, can't record yet
Deep sleep
Wifi signal indicator
Native Android mass storage
Without flickering
Almost working HW video acceleration
Smooth YT (LQ right now)
Live Wallpapers
FM Radio - read the bottom of this post
Camera - only photos, can't record yet
To get FM radio working, you must to install Spirit FM app and then go to:
Settings=>Region frequency=>Europe
Settings=>Audio=>Method=>msm7x30 Si5500
CHANGELOG:
-----RC2
camera is working (except video recording, but everything else is working) – in all apps!
Deep sleep is working when you’re leaving camera (no reboots needed)
new kernel (2.6.35.14, partially based on Squadzone kernel)
kernel: linaro optimized
kernel: pure ICS ramdisk without any modifications
bootlogo is back
updated cm sources
-----RC1
super smooth – the smoothness release ever
without any lags
improved performance
improved life on battery
camera isn’t freezing
fixed autofocus on Gio/Ace
smooth camera preview
on latest, stable CM9 sources
-----beta10
Camera:
fixed photo naming
fixed adding photos to gallery
smooth preview – now we can think about video recording
autofocus on gio&ace
universal binary – works both on ace and gio
better stabillity
hard-coded strings are now in xml
Other changes:
new CM9 bootanim
brand new device sources
better stability
smoother
quick responses – you don’t have to wait a few seconds until it’ll do what you want any longer
-----beta9
camera working (no settings and no video recording yet)
improved performance
ksm finally 100% fixed
changed default ksm values
much improved ramdisk
added ICS-specific values in ramdisk
kernel sources fixed now (github soon)
-----10062012
fixed all the settings
new, awesome music app
lockscreen improvements
a lot of new icons and options
releases for mini and fit
fixed switching between wifi and 3g
updated translations
-----13052012
Now we're going to nightlies
Updated sources - really improved CM9
Settings now are fixed - you don't have to reboot to save any changes!
Big update in Macław's libaudio
Added themes support
Added custom icons on lockscreen
GOING TO NIGHTLIES FROM NOW!
-----beta8
Wifi should be fully working right now
YouTube HQ is working, first 5-10 secound of movie can be laggy (will be improved)
Really, really more free RAM
Again faster than ever ealier
new KGSL backport
new genlock backport
new adreno framebuffer
new video decoder in kernel
improved filesystem cache
800MHz is now default CPU clock
fixed overclocking bugs
added KSM for even better performance (enabled by deafult, you can disable it in Performance settings)
fixed IOCTL_KGSL_TIMESTAMP_EVENT errors
now we are using clean libgenlock
improved KGSL page table size
-----beta7
New Adreno200 libraries for ICS
Fast and smooth system
Live Wallpapers working - won't slowdown your system, like on Gingerbread! (I'm using Phase Beam, it's beautiful)
Gallery and calculator fully working all the time
Gmail working without any problem
Browser working really good (smooth and fast)
All apps with graphic problems, like Poweramp, now working without any
Updated AOSP/CM9 sources
(development info) New gralloc and hwcomposer
Updated Macław's audio libriaries
FM seems to be working
-----beta6
Android updated to 4.0.4
Clean CyanogenMod - we're using only CM9 sources with our device sources!
Super smooth system
Smooth windows animations
New phone lock animation
Hardware acceleration on most video formats (not all)
Smooth videos on YouTube (LQ only right now)
Fully working deep sleep (all the time when BT is disabled)
GSM fully works (signal indicator/mobile data/phone calls/messages etc.)
Updated GoogleApps
Temporary removed CRT screen-off animation (will be back in beta7)
-----beta5
Flickering is gone
Working native mass storage (no need for annoying UMS app again)
Updated CM sources
New kernel, updated to 2.6.35.7perf-CL945787
Smoother than Gingerbread
Really good system performance
Improved GPU performance
Removed UMS app
-----beta4 - Macław and Mikegapinski build
Deep sleep working - happy battery
Wifi indicator fixed
Fixed BT issues
Bluetooth headsets support
BLN support for all devices
Updated kernel [Macław]
Reduced flicker, but still exists
Soooo smooth
Added working GalaxyICS app - you can update your CM9 directly from your device
Of course updated CM9 sources
-----Nigthly 02-03-2012 - Macław and Mikegapinski build
From user view:
Base video acceleration - BUT STILL NOT FULL
Really improved performance
Small battery life improve
Added a lot of Qualcomm hardware libraries, which making CM9 stable and smooth
Still flickering, but you won't see it in everyday use
Updates in my famous libaudio
From developer view:
Rebuilded device sources
Cleaned config sources (no more use external hardware sources, small fixes on framework, nothing else!)
Included base video acceleration - but videos is still laggy
New, rewrited libgralloc
Removed unsused libcopybit
Finally with enabled QCOM_HARDWARE flag
Compiled with all of QCom stuff
Clean base Android sources - only needed changes in GalaxyICS config
-----Beta 3
Working GalaxyICS app - news about project and updates directly from your phone!
Added CM9 bootanimation
Fixed all apps, which using webcore (Facebook, Gallery etc.)
Fixed wrong text at wrong place
Fixed some issues in Phone.apk
Fixed user-agent in default Android browser
Latest CM9 sources - CM Settings, like percent battery indicator, finally working
Readded CM9 Music Player
Performance boost
Camera - only photos, without preview, but really good quality of photos (only Gio now, Ace must to wait a few days)
-----Beta 2
Improved battery live
Working browser with full GPU acceleration and saving pages functionality
Working Gallery
Working GMail
Fixed CPU sleep when screen is off
Less flickering
-----Beta 1
Full HW Acceleration - smooth Trebuchet
YouTube fixed (temporary laggy)
Backlight works
New libaudio, rewritted from begining [Macław]
Some changes in framework
Updated sources
All headsets works
Temporary GMail and stock browser doesn't work propertly (graphic glitches, will be fixed)
-----Alpha 3
Fixed ICS keyboard
GMail fully works
Browser fully works
Performance boosts
Flickering is almost gone!
Merged with ICS-ACE project
New kernel [marcin1147]
Updated CM9 sources
Removed unused apps
----- Alpha 2
Fixed animations! Now it's working better than GM9
Market fixed, now you can download all apps available for Gio with GB
Calendar fixed
SetupWizard is working
BLN support
performance improved
Superuser binaries and app updated
Included Google Apps
----- Alpha 1
first CM9 for Gio release, based on original CM9 sources
INSTALL GUIDE
Flash Special Clockworkod Recovery for CyanogenMod 9:
skip this step if you have special clockworkmod (CM7.1/CM7.2/GM9) installed on your phone
Download: px-CWM-v2.zip
Place it on root of your sdcard
reboot to recovery mode
install this cwm from recovery
Flash Cyanogenmod 9:
Download and copy the latest CM9 ROM to SD Card
Reboot to Recovery Mode
Select Install zip from sd card
Select Choose zip from sd card
Select the new CM9 rom package
Select Yes - Install update
Wait till the Installation is finish
Now select Wipe data/factory reset
Confirm
Now reboot to phone.
Wait and enjoy CM9 on your Galaxy Gio
Patch for CyanogenMod 9
here's some report from me
Tested & Working:
RIL
proximity
touchscreen with multi touch (but it'll give alot of warning on logcat. trying to disable them)
gps
compass (please test)
accelerometer for autorotate
4 pin headset + button (like from samsung)
microphone
root & busybox
call & sms
packet data with 2G(GPRS/EDGE) & 3G (UMTS/HSDPA)
wifi
bluetooth
USB mass storage
wired & hotspot tether *
* wired & hotspot tether use 3rd application. u can download from this post's attachment
Not Working:
3 pin headset (must have ICS source to fix it)
hardware acceleration (our gpu libraries from gingerbread is not 100% working on ICS. and qualcomm isnt release libraries for ICS yet)
camera (problem with HAL)
FM Radio
BLN (liblight from gingerbread is not working. need to recompile liblight with some modification for BLN. the problem is i dont have ICS source)
find bug? just report it
PATCH FOR CYANOGENMOD 9I'M NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE BECAUSE FLASHING IT
NOTE: Start from patch-cm9-v3. i'm not provide move some system app to user app because it make patch size 14mb bigger.
if you fresh installed this rom (not yet applied patch) and want to free some space on /system partition then you need to install patch-cm9-v2 first and then install the latest patch
patch-cm9-v3
[Download]
Changelog:
disable setupwizard. because cause problem in some user
trying to patch surfaceflinger to decrease lag. but still failed
update egl libraries
fix error while charging in off condition. now u can charging when phone turn off
fix frame buffer issue on kernel, now we have more color & better color depth.
fix swap, now really working on my device
patch-cm9-v2
[Download]
Changelog:
added genlock feature to kernel
added zram (compcache) to kernel
patch video decoder driver
change all module on /system/lib/modules to work with our kernel version
added support to swap
added bugfix on S2E *not sure S2E work or not on this ROM*
change density to 150 for better view & match keyboard
fix autorotate sensor
fix sensors *please test*
change bootanimation
update usbstorage app, thx to bexton
enable setupwizard
move some system application to user application to give more freespace on /system (youtube,maps & videoEditor)
let me know, if you found bug because moving these to user applicaton.
[*] Dont forget to mount /system & /data from cwm before flash it
[*] after flash it, please open root explorer & go to /system/etc/init.d/02gio and change permission to rwxr-x---. sorry i forgot to change it
patch-cm9-v1
[Download]
Changelog:
fix touchscreen
fix flickering
add netfilter support for native data usage report
add IPV6 support
Patch for CyanogenMod 9
Macław said:
Now I have this problem:
I forked android_frameworks_base, android_hardware_msm7k, android_hardware_libhardware from ICS-ACE for complete compiling, but Waceland_ACE merge they wrong and, for example, I have:
Code:
<<<<<<< HEAD
// TODO: move away from static state once 5587429 is fixed.
protected static boolean sPolicyDataEnabled = true;
=======
protected boolean mPolicyDataEnabled = true;
>>>>>>> e3fc4d0ba9f68910f3a9cbecf266073bd28e1f9e
I need to remove:
Code:
<<<<<<< HEAD
// TODO: move away from static state once 5587429 is fixed.
protected static boolean sPolicyDataEnabled = true;
=======
and
Code:
>>>>>>> e3fc4d0ba9f68910f3a9cbecf266073bd28e1f9e
for have only:
Code:
protected boolean mPolicyDataEnabled = true;
It's really boring and laborious.
Now I have to go out, I'll cotinue it later.
Click to expand...
Click to collapse
hahahaha
try to use find & replace feature
i think u also need to see squadzone's github here. have you patch the kernel?
Patch for CyanogenMod 9
Macław said:
It's really, really anyoing....
I don't want to do it anymore....
Click to expand...
Click to collapse
wow, what happen bro?
Good Luck Maclaw and Phiexz
@Maclaw, i think squadzone from Galaxy Mini could help you, since he build cm9 for Galaxy Mini and the progress is enterin the CM9 Beta2. I saw many features already worked there.
Now I'm fixing frameworks from Ace ICS.
Now I have this problem:
I forked android_frameworks_base, android_hardware_msm7k, android_hardware_libhardware from ICS-ACE for complete compiling, but Waceland_ACE merge they wrong and, for example, I have:
Code:
<<<<<<< HEAD
// TODO: move away from static state once 5587429 is fixed.
protected static boolean sPolicyDataEnabled = true;
=======
protected boolean mPolicyDataEnabled = true;
>>>>>>> e3fc4d0ba9f68910f3a9cbecf266073bd28e1f9e
I need to remove:
Code:
<<<<<<< HEAD
// TODO: move away from static state once 5587429 is fixed.
protected static boolean sPolicyDataEnabled = true;
=======
and
Code:
>>>>>>> e3fc4d0ba9f68910f3a9cbecf266073bd28e1f9e
for have only:
Code:
protected boolean mPolicyDataEnabled = true;
It's really boring and laborious.
Now I have to go out, I'll cotinue it later.
No, I don't mod kernel yet.
Can you do that? I don't like to modify kernel ;-)
And for what you think I need Galaxy Mini device?
Edit: About fixing framework: phiexz, now I'm doing it like a robot (CTRL+f, CTRL+v, select, remove).
It's really, really anyoing....
I don't want to do it anymore....
Edit: Don't worry, I won't to stop my works ;-)
that's sad
Macław said:
It's really, really anyoing....
I don't want to do it anymore....
Click to expand...
Click to collapse
What happened with you Maclaw?
"Fixing" framework is really anoying, but I won't stop that, I just write I don't want to do that, but I don't have any other option ;-)
Phiexz, can you try to modify kernel for ICS?
Macław said:
"Fixing" framework is really anoying, but I won't stop that, I just write I don't want to do that, but I don't have any other option ;-)
Phiexz, can you try to modify kernel for ICS?
Click to expand...
Click to collapse
sure, i'll try it
3 Cheers
Macław said:
"Fixing" framework is really anoying, but I won't stop that, I just write I don't want to do that, but I don't have any other option ;-)
Phiexz, can you try to modify kernel for ICS?
Click to expand...
Click to collapse
Hey Maclaw..
I cannot help in developing but here I want to cheer you for all your efforts.
3 cheers for Maclaw and his supporters..
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
and Have a happy blasting New Year...!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
rahulmaxi01 said:
Hey Maclaw..
I cannot help in developing but here I want to cheer you for all your efforts.
3 cheers for Maclaw and his supporters..
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
and Have a happy blasting New Year...!
Click to expand...
Click to collapse
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Hip Hip Hurray!!!
Related
MAGLDR HTC HD2 AOSP Ice Cream Sandwich 4.0.1 Alpha 3.1 - NexusHD repack for now (don't have time to fix all things in my build - will replace it later)
USE AT YOUR OWN RISK !
Install:
1. you need an 170MB partition
2. put on SD card, start magldr, wipe cache, ..
3. install
Notice: there are some issues when logging into google the first time (when you enter your user and pass) you got an error but the account is added just igore the error and close it - go to setting/Sync and sync
DOWNLOAD alpha 3.1: http://www.mediafire.com/?ff1y1ryhsj4sjv1
DOWNLOAD alpha 3.0: http://etf.ba/HTC-Teo-ICS-Alpha3.zip (Don't download it has few bugs i am uploading 3.1 at the moment)
OLD release: DOWNLOAD: http://etf.ba/HTC-Teo-ICS-Alpha1.zip
Working:
AUDIO - INCALL , mp3
AUDIO - System - Only selected ringtones
Google apps, Market && Sync, superuser !! [in the next update need to make it stable]
Wi-Fi
Bluetooth
GPS with AGPS support
SMS
TouchScreen
Vibration
Charging
Compass
BMA150 3-axis Accelerometer
AK8973 3-axis Magnetic field sensor
AK8973 Orientation sensor
CM3602 Proximity sensor
CM3602 Light sensor
Not Working:
SYSTEM AUDIO - some ringtones (half of them)
Gallery - images not showed
3G/RMNET (severe connect/disconnect issues - sometimes works) (Not test PPP yet)
USB Mass Storage / Debug mode
Camera
Headphones :|
Thanks to:
rapmv78 - audio fix
texasice - NexusOne build
tytung - HD2 repack
will work on getting google apps working
Really nice I´ll give it a try
Tell me when upload is finished
Nice more devs working on ics for our old hd2's..
Sent from my Nexus One using XDA App
Wow. Very nice love my hd2
Upload done !
excuse me but....
So let me get this right. This is just Tytung's release with an audio fix? Why not just work with Tytung to get ICS working completely on the HD2. Is this a dev race to release various incomplete ICS versions
Cruonit said:
Upload done !
Click to expand...
Click to collapse
Nice downloading now
Downloaded ! Try it now, thanks you
Dizzle said:
So let me get this right. This is just Tytung's release with an audio fix? Why not just work with Tytung to get ICS working completely on the HD2. Is this a dev race to release various incomplete ICS versions
Click to expand...
Click to collapse
i plan to make some modifications to the rom - currently building it from source
Cruonit said:
i plan to make some modifications to the rom - currently building it from source
Click to expand...
Click to collapse
Fair enough. I feel that if we have all the talents and resources concentrating on the development of ICS on the HD2, we can get it working quicker rather than everyone going off in little corners with various bits working.
More the merrier though so good luck
Very nice Job guys...
I am fully hope about the ics port...
If anyone need help to test the versions of alpha iam your men^^
Good Luck & King Regards
I dont get it working -.-
It boots up but than nothing is working and after restarting it wont boot System anymore
it working very well,but how i can disable virtual keys?
Svaka cast Sad cemo probat
booted, sound works, bit laggy but its good
it's boot and work！
but....the wifi still can't work
Agree!!!
Dizzle said:
So let me get this right. This is just Tytung's release with an audio fix? Why not just work with Tytung to get ICS working completely on the HD2. Is this a dev race to release various incomplete ICS versions
Click to expand...
Click to collapse
+1
And I'd add that seriously.. just added sound over a whole pack.. doesn't seem like a lot genuine to me anyway..
Rgds
lion4757 said:
it's boot and work！
but....the wifi still can't work
Click to expand...
Click to collapse
hmmm...mine wifi works..no problem, it was on in sec....
got sync, market, and google apps working still not stable will try to make it stable than update.
so it's some kind of functional now when ringtones work
ringtones that work: Argo Navis, bell phone, machinia
someone should look if they are mono
Cruonit said:
got sync, market, and google apps working still not stable will try to make it stable than update.
so it's some kind of functional now when ringtones work
ringtones that work: Argo Navis, bell phone, machinia
someone should look if they are mono
Click to expand...
Click to collapse
Nope....stereo. Seems that mono tones not working.
Converting all ogg files to mono would make it work... it's a hack but...
anyone interested :|
...TEAM INFERNO......proudly presents...
...CM9 OPERATION: INFERNO v3.1...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*****NOT RESPONSIBLE FOR ANYTHING THAT MAY HAPPEN TO YOUR PHONE, SO PLEASE FOLLOW THE INSTRUCTIONS CORRECTLY*****
Special Thanks to:
*---->>>THANKS TO Eelginsk8r FOR THE BASE AND ALL THE HELP CHECK OUT HIS ROM HERE<<<----
*TEAM INFERNO
*CYANOGEN
*TIAMAT TEAM For Their Kernel LIKE ALWAYS
*Anybody that i missed plz remind me
REQUIREMENTS:
*ROOT & S-OFF
*Rom Recovery
WHAT WORKS:
*TRACKPAD WORKING THANKS TO ELGINSK8R
*NO MORE DEEP SLEEP
*NO MORE RANDOM REBOOTS
*ADDED SHOT OF AWESOMENESS
*CAMERA AND CAMCORDER WORK FFC & BACK CAMERA
*Battery Enhancements
*Performance Enhancements
*Added IcsBeats (idk if u can tell a difference)
*All Games Playable
*No Downloading Errors From Market
*Facebook sync
*All sensors
*Bluetooth
*Headphones
*Wi-Fi tether
*Data usage tracker
*Video streaming and playback
*Genius Button
*Full 3D HW acceleration
*Camera working
*New Audio Drivers
*New Adreno Grafics Lib
*SMS/MMS
*GPS/ Maps Navigation
*Sound
*Calling
*Touchscreen
*3G/4G Connectivity/Indicator
*Gmail sync
*Google Music
*Calendar sync
*Low Mic Issue Fixed
WHAT DOESN'T WORK:*CAMERA FLASH & ROOT ACCESS*
***CHERRY PICKED***Frameworks:
[NEW] profiles: Add support for getting last active profile
Sensor: Add RotationVectorSensor2
Frameworks/SystemUI: Hide expanded dialog when screen is off
Fix don't interrupt ongoing PIN/PUK verification
Settings:
[NEW] Profiles: Better layout/sizing of the app list icons and text
Notification light(LED) settings
Apps:
Mms: Make notifications consistent with the Gapps'.
Phone: Makes network mode toggle work. Port from CM7.
Phone: Disable accelerometer sensor while in-call and screen UI is off
Phone: add voicemail notification setting
Trebuchet: Preferences: Infinite/Loop homescreen scrolling
Other:
[NEW] Use external/webrtc/ from CM
[NEW[Kernel based on TIAMAT source with a few improvements and fixes.
Merged:
Camera: Added Pinch zoom
Mms: Fix wrong message selection in context menu
Inputmethods: Add ability to use volume rockers as cursor
Make the volume overlay more functional
add sync and mobile data override
Dialer : Cleanup / landscape consistency
T9 Dialer : Update upon contact info changes
Mms: Added "Strip unicode" feature
Dalvik: Compact merged dexes on their byte aligned size
Apn Settings : Fix panel title
SystemUI: Fix data activity overlay not being removed when data is disabled
HOW TO DOWNLOAD:
*Boot into Recovery
*Wipe Data, Cache, and system
*Make sure /system is mounted in your recovery
*Flash the ROM CM9 OPERATION: INFERNO V3.1(GAPPS INCLUDED AS OF 4/29)
*Flash SU Access Binary
*Boot and Install will take quite some time LITERALLY so be patient and don't panic it will boot up.
*If for some reason it doesn't boot on the first flash pull battery and reflash without wiping and your set
CHANGELOG
Code:
v3.1
*Added Aroma Installer
*removed double gallery
*removed reloaded app
*fixed usb fc
*fixed bug with camera
*added new system ui
*added new camera.apk no flash still
*use angel camera to use flash
*smoother cm9 rom
*added new cherry picks
...AWESOME EXTRAS...*DOWNLOAD AFTER SET_UP AND BOOT (FLASH)
Download: ***TIAMAT KERNEL***
Download: ***SHOT OF AWESOMENESS***
Download: ***INFERNO SHOT***
Download: ***RELOADED ICS CUSTOMIZATION***
Download: ***DARK CM9 THEME***
...CM9 TWEAKS...*INSTALL VIA SM MANAGER* (SYSTEM/TWEAKS)
***3G TURBO CHARGER***
***KICKASSKERNELIZER***
***V6 SUPERCHARGER***
Changelog: V2
Fixed Bugs
Added IcsReloaded (Thanks rob43)
Changelog: V3 Updated to latest CM code
Updated Skia Graphics Engine to latest in AOSP master (not merged into CM yet, but I posted on their gerrit).
Compass arrows in Google Maps should work
Camcorder should work when in SD (480p) mode
Included some Advanced Dialer Settings link
Built with Sun/Oracle Java instead of OpenJDK. Also, set javac to target 1.6 instead of 1.5. One of those two made things fast
fixed multitouch issues.
Included Lock Screen Shortcuts and system volume stuff in gerrit.
Reverted some multitouch stuff (Temple Run might not work, but other multitouch stuff should be better).
Added new feature from gerrit to add screen lock delay after turning off the screen.
Theme manager
Resync with CM9 upstream (new boot animation and some other stuff)
More work on video decoding (but still not 100%)
Plus some other stuff that I can't remember.
What's Currently Broken:
LED flash for stock camera (apparently does work for Angel Camera)
Market download issues: su, and then killall drmserver in the terminal (needs to be done after each reboot if you are still having issues)
Unity3D games like Temple Run have touchscreen input issues (but everything else seems to work with multitouch).
... Let me know what else
...TEAM INFERNO... Mr. Highway - Team Leader
Saranhai - Developer/Graphics Designer
Sckboy78 - Developer
invasion2 - Developer
...Awesome... - Developer
THEindian - Developer
inspiredbyhtc - Developer
For the people that read the first page. Been talking with some guys on XDA, building a rom with them, featuring a whole new ui.
To my guys, don't say anything, it's a surprise
If I helped, give thanks, if you please.
........Death before dishonor........
Team inferno
Leader
FAQ
FAQ - THE BIG PICTURE
What is ICS?
ICS is Ice Cream Sandwich - Google's latest version of Android.
- Some of the very latest phones on the market already have it installed. e.g HTC One series
- Some slightly older phones will eventually be 'upgraded' to ICS e.g Desire HD, but this may be a number of months away, and promised 'upgrades' have sometimes never been delivered at all.
- If / when it does arrive for Desire HD it may not happen for everybody at the same time, sometimes it's carrier by carrier, and finally 'retail' (non carrier branded) handsets that get the upgrade last!
- If / when it does arrive, it will be overlayed with HTC's Sense (some like it, some don't)
- In the meantime, folks are working on getting ICS on your Desire HD BEFORE it's officially released for the phone, with and without Sense (giving you a choice)
So why don't some features work?
Well, the ICS being used on Desire HD is 'taken' from officially released ICS phones like the HTC One range, or 'leaked' ROMS from similar phones.
However, those phones have slightly different hardware and features than the Desire HD - so they aren't exactly the same. This means that parts of the software have to be 'ported' to work on the Desire HD.
OK, so why is porting so difficult?
The Android O/S is 'open source' meaning that anybody can see the actual source code for themselves, and see how it all works. They can modify it and adapt it to suit their needs (good).
Phone manufacturers USE Android in their phones, but they don't have to make all their own 'extra' software open source too. They like to protect their software by keeping it secret (not so good). There are many reasons why they do this, both good and bad, but it makes porting difficult.
When developers don't have access to the source code for parts of a phone, they have to write their own!... this means they have to have highly detailed knowledge of the phone, its hardware and other software components. Sometimes they can try things by trial and error, sometimes they have knowledge from a similar phone, and sometimes they just don't know.
This is the most common issue for 'ported' ROMS. Things like Power Management, Camera, WiFi, GPS etc are the things that make one manufacturer's phone stand out from another, and therefore end up 'secret'.
This does not mean that they will never work, it only means that they take longer to get working.
Who does the porting?
The actual porting is done by surprisingly few people:
- Some guys who know 'inside secrets'
- Some guys who are just great developers but who don't have the secrets
- Some guys who can develop but need a little guidance
- Some of them are 'great guys' helping the community (and keeping their own skills up to date)
- Some of them have other motives (good and bad)
- Some of them form teams to work on different ports
Why don't all the developers work together?
Developers are people - they have all the same issues as everybody else:
- Some like working alone
- Some feel that other developers standards aren't high enough
- Some are trying to fix a specific problem that THEY want fixed
- Some teams have different goals (one team might be aiming for a port that can work on 5 different phones, whilst another team are focused on a single phone. One team may want a totally 'clean' ROM and another want a ROM with lots of customisation options built in)
- Sometimes, people just don't get along with each other
I thought the ROM makers did all this work?
You'd be wrong.
The ROM developers use the ported code to make their ROMs. Sometimes they can choose different components from the various development teams to build a ROM.
Imagine a motor car:
1) The 'developers' make the engine, wheels, steering, chassis etc
2) The ROM Makers build their car choosing the components they need for their ROM
3) The 'Modders' add custom paint colours, fancy headlights, custom interior etc
The 'developers' are not smarter than the ROM makers, and the ROM makers are not smarter than the modders. They just have different roles (and some people do all three roles!)
reserved for the hell of it
1st!
Sent from my HTC Glacier using Tapatalk 2 Beta-5
Pretty ...Awesome...
Any notes on Wi-Fi calling though?
DKMikey said:
Pretty ...Awesome...
Any notes on Wi-Fi calling though?
Click to expand...
Click to collapse
Waiting on Febyc for the files I tried adding it no luck it hangs so I didn't include it
Sent from my HTC Glacier using xda premium
Will flash shortly...new bomb developer=...Awesome...
I removed the kernel it was bootlooping with the new boot.img so just flash ROM & GAPPS!!!!
Sent from my HTC Glacier using xda premium
So many version I'm going crazy~ @[email protected] thanks TEAM INFERNO~
...Awesome... is the trackpad fixed on this one? the mouse pointer thingy is kind of annoying
Hinouchi said:
So many version I'm going crazy~ @[email protected] thanks TEAM INFERNO~
...Awesome... is the trackpad fixed on this one? the mouse pointer thingy is kind of annoying
Click to expand...
Click to collapse
Yea the track pad is fixed thanks to elginsk8r
Sent from my HTC Glacier using xda premium
Once camera flash works, bam! I'm switching lol. Thanks team inferno!
Sent from my myTouch 4G
...Awesome... said:
Yea the track pad is fixed thanks to elginsk8r
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
Sweet
...Awesome... said:
Yea the track pad is fixed thanks to elginsk8r
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
Awesome... great rom. IRT Trackpad wake, only getting the menu and back button wake, trackpad does nothing.
0.0 said:
Once camera flash works, bam! I'm switching lol. Thanks team inferno!
Sent from my myTouch 4G
Click to expand...
Click to collapse
Camera flash works but I lose WIFI anybody got any ideas???? Wifi works but we lose flash??? Lol... so i took flash out and left wifi...
Track pad I meant we added scroll not track pad wake sorry I misunderstood
Sent from my HTC Glacier using xda premium
thanks for this, works good but the search key isn't working
stlouie65 said:
Awesome... great rom. IRT Trackpad wake, only getting the menu and back button wake, trackpad does nothing.
Click to expand...
Click to collapse
the trackpad fix fixes the little mouse pointer thing. not trackpad wake
saranhai said:
the trackpad fix fixes the little mouse pointer thing. not trackpad wake
Click to expand...
Click to collapse
Oh, ok. Thanks bro
Is the CM9 kernel included if we don't want to use tiamat?
el_smurfo said:
Is the CM9 kernel included if we don't want to use tiamat?
Click to expand...
Click to collapse
Yes.... To use Tiamat I have to change the boot.img if not u will go in a bootloop but I made major changes and modifications to the cm9 kernel so u will have better performance and the phone wont sleep and not wake
Edit: will be merging all the other customizations on the next release me and elginsk8r working on the camera flash first
Sent from my M865 using XDA
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Notice: Flashables are divided into Post #1 and Post #2. Post #1 will contain all the information, misc & flashables for 4.1.2 and Post #2 will contain the flashables for 4.2.1/4.2.2, take note all the latest will be the most recent upload. All 4.2.2 builds start from V3B4
What This Mod Does:
Nexus devices have pitifully low volume. Previous fixes like the Volume+ app and Franco's app only increased the volume on music playback, or in the headphones, but did nothing for in-call volume or notifications.
This mod changes all that. It will increase ALL volume, across the entire phone: ringtone, music, notifications, loudspeaker sound, ear speaker sound, in-call volume, and headset.
Requirements:
-Rooted.
-Custom recovery like CWM or TWRP.
-Jellybean Deodexed OR Odexed.
-Custom kernel with high quality audio tweak enabled is recommended (e.g. Franco or Trinity or AK).
-Nandroid Backup, I implore people to have at least one recent one as this method is faster.
Compatible With :
-Galaxy Nexus, Kindle Fire (reported), also Nexus 7.
-Universal for all kernels and ROMs.
-All major players, including: Google Music, Noozy, PowerAMP (see note below), Apollo, PlayerPRO.
Note on PowerAMP - To allow PowerAMP to be controlled by external DSP/EQ you must disable Direct Volume Control under Audio Tweaks in Settings.
Installation:
*Revert previously installed patch as necessary.
1. Copy zip to Internal Storage
2. Boot to custom recovery
3. Install zip from sdcard
4. Reboot
5. Choose EIZO ReWire PRO under Settings > Sound > Music Effects
Note: If you do not have the "Music Effects" submenu then EIZO should be enabled by default since it's the only DSP present.
FAQ:
What you should do:
Configure EIZO, Select it in Music Effects.
Refer to the Op for EIZO settings.
Practice tuning your own values. EVERY user has their own listening experience. What sounds good to one and not the other doesn't become the fault of the MOD.
Keep backups of your Alsa Mixer if you use call recording BEFORE flashing this MOD
Keep backups (The revert is safe) but I am not responsible for loops if you flash this on another device.
Flash the MOD after every ROM flash. Not necessarily kernel flash.
Search if your ROM has been mentioned. KEYWORDS are a must. Example is 'PA works' and the results will be displayed. If not feel free to ask and I shall assist you.
What you shouldn't do:
Test the loudness via Settings. There is an implemented system limiter so you can't tell the difference. Call yourself or sms yourself so you can know the difference.
Complain of distortion without testing your own values. I've set a recommend layout in the OP hoping it's to give you an idea.
Error 7, Error 7 is a halt procedure. Please debug the error and see what's written before saying Error 7 only.
Alternate flashing. (I know some of you prefer to flash the Gnexus mod on the N7 but doing so breaks the media codes, if you have the patience to swap the media codes in etc folder of the N7 then it's fine)
Don't use Noozy lockscreen controls, they're unreliable till a new app is remade.
Don't use compression in EIZO. Causes massive volume fluctuations as it was set to be an AVLS.
Credits:
Awesome.. who's done a great job, and a big thanks to bigxie too for the epic 4.1 port.
montrealguy for fixing up this guide for me where it wasn't as clear as it should be, Thanks buddy, much appreciated.
TheGingerbreadMan for testing out and giving feedbacks on each version religiously to make sure it works flawlessly.
Cyanogen team for their epic libs.
MASSIVE MASSIVE THANKS! to r-ikfoot! If not for you I wouldn't have gotten beat's working back again. And of course Alastor89 for guiding me to the right path. Kindly go over to his thread and show him some love.
hidato_aori partnership with Noozy + EIZO Labs
osm0sis for writing the noob-proof installer and revert in the newer releases to make it safer and easier for everyone, as well as
completely universal.
Bewinxed & osm0sis for organizing this post for me.
And of course, Massive thanks to the community for their feedback, appreciation to a massive audiophile (me) and to those involved in the project to make GNexus an amazing smartphone among the rest. Thanks to everyone who supports this project.[/I]
Reason for major swap from DSP+Apollo - Noozy
As much as I like giving the option to people on DSP and how they chose to listen to their choice of music, I did a poll over the N7 side, and collected all the data here, and about 70% don't use DSP but only 30% do. So inorder to satisfy both sides, I decided to integrate proper XLouder+Beats that work perfectly without issues, this would highly benefit the audiophiles and those who complain about bass and it's distortion. On another note I have tried my best to retain the loudness infact this build has a whooping 5% loudness, 7% with HTC enabled. And all this is safe.
Word to the wise when using Noozy do not max Psychoacoustic II, as the bass works best on 20-40% [And I repeat for this to work, Please invest on Class A/B/C Bass headphones, Also, Beats..Is class C :|, Most of you might think Beats was Class B or A but it's not. I've tested out this so called 5.1 Surround Sound and Razer Electa $60 headphones can output that and Beats can't] Just my 2 cents. Don't shoot the messenger LOL.
Noozy was the ULTIMATE choice as this cleared the headache of choosing which side do I lean on and which side would I end up screwing over. Bass+Loudness vs those who like baubly neat interfaces, and earlier today a friend of mine linked me Noozy and I tested it out and I was shocked as to how it abused EVERYTHING properly, This player was recommended to most HTC Beats Users but after enabling it on our build.prop it works just the same, Amazing, Crisp, Clean, Flawless! and the album artwork is GORGEOUS! Please do not forget to enable the options in Settings shown below to get the best feel of it. Also Lockscreen Controls are glitchy, but I'm sure the developer would work on a way to fix this.
Click to expand...
Click to collapse
Best EIZO EQ Settings for N7 to avoid distortion/rumbling (Credits to osm0sis):
http://forum.xda-developers.com/showpost.php?p=33088538&postcount=366
PS: Don't forget to try these Noozy options (Credits to bdubs4200):
Re: Noozy Distribution - Noozy went dark, all threads about it including it's files. It is included in the patch but if you want it seperately, you're welcome to grab it from my post here
http://forum.xda-developers.com/showpost.php?p=32951618&postcount=1257
EULA : The version of Noozy attached is by no means gained via monetary conditions, the attached copy is the free one released under the open source EULA and not the paid modified apk on the market. Under any circumstances this APK will not be used to market, sell, or be promoted for monetary gains and will be used for personal, non commercial use.
--------------------------------------------------------------
DONATIONS
If you like my work, feel free to buy me a beer.
--------------------------------------------------------------
NexusLouderV5B1 4.3 only
Completed
- Porting over libs
- Testing Xlouder libs
- Testing HTC libs
- Debugging & reloading of apps.
Changelog
- Deletd SwiqiSettings.apk
- Deleted Volume.db
- Deleted mixer_path.xml as this caused conflicts and replaced with a better solution
- AB, EIZO & Dolby all proven to work after building from CM tree
- Bass refinement
- Complete overhaul of MOD again from scratch and refined each aspect
- Cleaned, compressed and updated libs overall
- Tested with PA, CM, Stock, All system's go.
- Fixed issue : EIZO & Beats crops the sound by 50% when options are selected
- Fixed issue : Stopping a song in between clears selected options
- Fixed issue : Selecting a new song starts off louder suddenly then drops
- Fixed issue : Random FC when changing tracks
- Fixed issue : Skipping tracks fluctuated volume
- Fixed issue : Static sound when listening to lower frequencies
- Fixed issue : Audio wakelock randomly popping up during notifications
- Fixed issue : Sound permanently lowered when call/notification comes in
- Fixed issue : Random FC of Settings after applying changes.
Caution: Clear cache/data for all DSP's if you had saved values previously as 4.3 and 4.2.2 settings delete them as they are like 2 saucy women in a bar getting ready for a ghetto booty showdown.
Word to the wise, In order for the DSP's to kick in, 4.3 has made some security changes where it won't just run in the background, For EIZO & Beats to kick in, you need to launch the app manually after selecting it from Music->Effects, proceed to GMusic or App of choice, followed by going to the EQ settings from the music app, and change the settings. When changing DSP's from one to another, completely close out the app from the Multi-tasking menu, and notification bar (Best if you FC it from App Info) then change DSP in Music->Effects Settings and finally relaunch the app, making your changes in the EQ.
-All 4.2.1/4.2.2 Versions shall be moved here.
V3Beta1 4.2 | 4.2.1 Changelog
-Fixed CWM/TWRP compatibility (Now works flawlessly for both)
-Added Bravia Engine V2
-Removed the line that disables androidmediaeffects under framework (no more need to replace that file)
-successfully added added libcyanogen-dsp.so and correctly loaded through audioeffects.conf, so no more FC and eq works Bass Boost
-Added Beats black edition of DSPManager (the one provided with ACID audio) [This is in data/app so which means you can remove it if you don't like it]
-Added libbeatscorehtc, libsrscorehtc, libsrsprocessing from Droid DNA [HTC Bass should work now]
-Fixed Revert for both CWM/TWRP
-Updated EIZO this should fix the FC most people are having.
-Cleaned and trimmed a few values
-Added a semi louder version of libtinyalsa.so, libaudioflinger.so AOSP based.
-Reworked codecs to load up properly for Tegra devices
-Updated EIZO to 2.0.1.8 (Latest)
V3Beta2
-AOSP/Stock based ROMS only. For now. (Although a few have claimed it works for unofficial AOKP)
-Fixed random hiccups over audio
-Fixed low static sounds
-Loudness is back and better than ever from the V1 build.
V3 Beta3
-Based on latest GNexus V6B3
-Finally based on AOKP (This means it's compatible for ALL ROM's), back to universal baby!
-Lowered memory consumption, previously there was a leak which I might have overlooked. Tried to fix it in this build.
-Updated fix for broken resampler on 4.2
-Updated libs/hw for loudest possible incall/notifications.
-Updated latest EIZO 2.0.1.13 thanks to Louis & bombadier for direct download links.
-Bluetooth a2dp fix (testing phase)
-Updated lib/soundfx libs to latest based on official AOKP release.
-Small hotfixes
V3 Beta5 4.2.2
-Based on 4.2.2, Wooo
-Based on AOKP libs so therefore they should work for all, Tested on Stock.PA.AOKP and they load perfectly fine.
-Properly working Revert, glitch free this time.
-Added proper working a2dp Bluetooth fix that comes with 4.2.2
-Added Updated Beats back in. (Credits to Awesome)
-Added Sony DolbyMobile (Credits to Awesome)
-Added HTC latest updated libs
-Fixed minor bugs with volume (If you are using PA, the volume bug occurs from the ROM, not the MOD)
-Debugged the build.prop tweaks to make sure they get loaded properly this time.
V3Beta7
-Reverted tinyalsa, audioflinger, audioinj
-Fixed Revert not properly reverting/deleting AudioEffect/Swiqi
-Fixed distortion issue with sound libs.
-Implemented experimental grouper audio_hw.c build
-Updated codecs and soundfx libs
-A2DP is not included as it causes issues with some ROM's considering 4.2.2 AOKP libs don't play nice with AOSP releases.
-Added experimental AudioEffectService, Swiqi
-Updated Xperia libs.
-TBA
I think it will benefit the masses if the brave post their Rom \ kernal combo win or lose.
Ian
sent from time-out
ianPhillips1 said:
I think it will benefit the masses if the brave post their Rom \ kernal combo win or lose.
Ian
sent from time-out
Click to expand...
Click to collapse
Highly agree, that would benefit me especially as I could add it to list of combinations that work. Besides I've set to a manner that it works on Stock/CROM's and should work on AOSP based roms.
Flashed this on my N7! Sounds way better and a lot louder than Stock on my beats headset as well as the external speaker!
Just installed this on my N7 with stock ROM and Motley kernel. Booted up. Showed "Android upgrading" all 89 steps which took about 90 seconds .
Amazing increase in volume!
Thanks,
Is there a particular DSP manager/app that you reccommend?
NEVER mind. I see that the MOD installed the DSP manager app. Very cool.
swieder711 said:
Just installed this on my N7 with stock ROM and Motley kernel. Booted up. Showed "Android upgrading" all 89 steps which took about 90 seconds .
Amazing increase in volume!
Thanks,
Is there a particular DSP manager/app that you reccommend?
Click to expand...
Click to collapse
That question got me confused a bit
If you're asking about DSP, there's a DSP Manager included, I have included a script to remove any older versions and include the one that works best with all Beats presets. It should be in your App drawer DSP with a B logo.
If it's about what apps work well with DSP?
Not in particular as it works with both GMusic/Apollo, I've always liked Apollo anyways, Lightweight and works best with DSP.
now the sound dont work
try to install the rom stock
Happens the first time. Then it will restart and work again. It takes a while for the system to re catch and re scan the file system and load the modules.
Sent from my Galaxy Nexus using Tapatalk 2
After flashing on paranoid android, sound doesn't work, and anything that requires sound doesn't work (YouTube)
Sent from my Nexus 7 using xda app-developers app
This mod does not seem to work on cookies and cream. DSPManager does not do anything and the volume is the same as stock.
Sent from my Nexus 7 using XDA Premium HD app
ke5pcv said:
This mod does not seem to work on cookies and cream. DSPManager does not do anything and the volume is the same as stock.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
Confirmed.
Sent from my Nexus 7 using xda premium
xT4Z1N4TRx said:
After flashing on paranoid android, sound doesn't work, and anything that requires sound doesn't work (YouTube)
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Hmm guess I might need to review the whole AOSP Rom, but this works perfectly with stock. (Tested it myself)
ke5pcv said:
This mod does not seem to work on cookies and cream. DSPManager does not do anything and the volume is the same as stock.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
Is that AOSP? This works properly with stock and croms
Sent from my Galaxy Nexus using Tapatalk 2
Edit: On another note, Uploaded a new revision called NexusLouderAOSPTest.zip in the OP, kindly do try that and let me know, That should work for AOSP based ROM's. If it works and it's louder (Sorry I included Apollo to make sure it works) then let me know, then I will put out a Beta2 by tomorrow. The contents of the AOSPTest are what's supposed to be the main core of the audio patch. If that works, then ofcourse, I will work on stage 2.
Misledz said:
Hmm guess I might need to review the whole AOSP Rom, but this works perfectly with stock. (Tested it myself)
Is that AOSP? This works properly with stock and croms
Sent from my Galaxy Nexus using Tapatalk 2
Edit: On another note, Uploaded a new revision called NexusLouderAOSPTest.zip in the OP, kindly do try that and let me know, That should work for AOSP based ROM's. If it works and it's louder (Sorry I included Apollo to make sure it works) then let me know, then I will put out a Beta2 by tomorrow. The contents of the AOSPTest are what's supposed to be the main core of the audio patch. If that works, then ofcourse, I will work on stage 2.
Click to expand...
Click to collapse
Its working flawlessly on Stock rom, just requires a reboot and then everything works perfect!
Flashed on CM10.
Cant say i notice a differnce though?
after flashing on xenon and paranoid - sound bonks... had to reflash
It flashed on slimbean but it didn't seem to make any difference. I even tried the recommended dsp settings.
Sent from my Nexus 7 using xda app-developers app
Flashed but it seems to effect my games negatively.
Sent from my Nexus 7 using xda app-developers app
NexusLouderV1 didn't seem to do anything on CM10 Nightly 09/15, there is no option in the DSP manager for "beats boost". I enabled Bass Boost and set it to extreme and then enabled the Equalizer and set it to Acoustic and there was no difference in sound from Google Play Music. AOSP Test didn't do anything either and it removed DSP Manager so I couldn't do anything, am I missing something here?
edit: I just went back to stock and rooted, then flashed the first zip and everything gets copied over but DSP Manager doesn't get installed. It says that the APK is invalid. I checked the MD5 sum and it's the same as on my computer. I even re-downloaded it and the sums are the same.
Please note, I'm retired, and for the most part I don't visit XDA very often, I will respond if I happen to notice there's been a post, but don't send me angry PMs if I don't, personal life and finances has made it almost impossible to continue my work with android at all.
That being said, I'll still help where and when I can.
First and foremost, this is based on waydownsouth's trees, both the T20-common and the A100 specific trees with some updates and changes and additions from me.
I can't test anything, I don't have an A100.
These are not going to be nightly, daily, weekly, or whatever, these are now simply where I post test builds from working on the trees.
These are 4.1.2, and NOT 4.2! Use the 4.1.2 GApps packages!
Since I'm starting over, there are things that NEED to be tested, please:
BlueTooth
GPS
WiFi
Audio in general/performance
Audio specific outputs/inputs, such as headphones, headsets, BT, HDMI, dock, USB, whatever you can think of.
Video playback support/performance
Mounts, internal, external, swapped, whatever.
UI performance, I don't mean "It has a slight stutter for 1/4 of a second scrolling my 500 apps app drawer 2 seconds after it booted" I mean it either runs well or runs like crap over a day or two of use.
Cameras. I mean cameras in normal designed use, not photosphere or why it won't take clear pictures underwater at 8mp from the front camera.
Whatever else you can think of that needs testing
Please report them here, this is to take the random stuff out of the trees thread and keep here where it's more relevant.
As usual right off Hardslog has permission to use these as bases for whatever he wants, in a pinch, he can use them for toilet paper, anyone else please ask or let me know first.
Instructions
Coming from a previous pio_masaki build:
Make a nandroid backup of your current install, backup system, boot and data. Recovery optional.
Wipe Cache
Wipe Dalvik Cache
Wipe System
Install from zip (cwm) or install (twrp) and pick the cm10 zip you want.
CWM:
Hit yes (cwm)
Flash Gapps (cwm) *use a 4.1.2 GApps, not a 4.2 GApps*
TWRP
Hit the additional zip button, add gapps zip *use a 4.1.2 GApps, not a 4.2 GApps*
Slide to flash
Both
Reboot
Let ROM sit for 10 minutes
Reboot
Let ROM sit for 5 minutes, begin normal usage.
Coming from any ROM besides a pio_masaki CM10
Make a full nandroid backup
Wipe Cache
Wipe Dalvik
Wipe System
Factory Reset (optional, blackhole wipe, this will wipe internal SD as well!)
Install from zip (cwm) or install (twrp) and pick the cm10 zip you want.
CWM:
Hit yes (cwm)
Flash Gapps (cwm) *use a 4.1.2 GApps, not a 4.2 GApps*
TWRP
Hit the additional zip button, add gapps zip *use a 4.1.2 GApps, not a 4.2 GApps*
Slide to flash
Both
Let ROM boot, allow for up to 15 minutes.
Once the welcome screen appears, let it sit for 10 minutes. Don't do setup yet.
Reboot
Let sit 5 more minutes.
Proceed with setup wizard
Restore USER apps only. Restore data if needed, otherwise start fresh from the Play Store.
DO NOT RESTORE SYSTEM APPS OR DATA
Reboot after restore is finished.
Use as normal.
Downloads
Ok, goo.im went down, and pio-masaki.com is gone, so the files are effectively gone for ever. I have 1 single build, B3 TabUI Mod, which you can find here:
CLICKY CLICKY
Also a far older, dusty, ancient build is tucked away over on devhost, which is here:
GRANDMA CM10
I have no idea what works or doesn't with it.
If those don't float your boat, head over to the kuroikaze thread, there's some builds there as well, 4.1 and 4.3 based.
Feel free to use any gapps packages you wish, but please use 4.1, if you have issues with things like keyboard vanishing/crashing, play store or other stuff crashing, these ARE gapps related.
Change log:
B1 - 11-08-12: Initial updated 4.1.2 build. Addressed HDMI audio. Memory bar added to recent apps.
B2 - 11-25-12: Updated source build. Memory bar in recent apps removed, "kill all" button added to recent apps instead, upstream CM change.
B3 - 1-13-13: Updated source, built using Linaro 4.7 toolchain and -O3 and strict-aliasing in various areas. ROM only, kernel is still stock CM9. Basically just an updated build for you guys, haven't addressed anything in particular.
B3 - 1-13-13 Modded:
Acid Audio with Sony and Awesome Beats, new transition animations, slight dalvik tweaks. Just some of the stuff I've been working with on the Thrive added in for flavor. Untested.
B3.5 - 1-17-13: Updated source to B3, however is built with Tablet UI forced, otherwise stock build of CM10, no mods. Don't expect me to keep doing dual builds of CM10 for you guys =p
B3.5 Modded - 1-17-13: Updated source to B3, however is built with Tablet UI forced, same mods as B3 Modded.
B4 - 1-19-13: Addressed GPS issues, Trebuchet oddness and clock fitment (cutoff). Blind fixes, may fix everything or nothing.
B5 - 2-01-13: Nothing special, just an updated build as was asked about. Here's your friday night flash fix guys. Apparently broke external SD mounts somewhere.
B3 Tablet UI and B4 Phablet UI:
Seeder
AC!D audio
XLoud
Supercharged
Die Hard launcher
init.d memory tweaks
time killer killer mod
maximum overdrive mod
service preserver
transition animations
20130715
Updated source
Trimmed the trees a little
Added prebuilt kernel and modules
Simply a test build that the changes didn't break anything.
20130731
Experimental 3G/RIL support for A101 devices!
Memory management, in a couple places now, to help with memory leak issues. While it may not prevent the memory leaks, it should prevent it from impacting the system so badly. Thank you, nVidia.
Dock settings added for those with the dock. Does anyone even have one?
BT DUN, WiFi P2P and WiFi Direct support added (experimental)
Rotation Lock Switch support added (back) in
Music Visualization overlay settings
Add large heap to launcher2
Tuning of the boardconfig and device files for UI.
Probably more I'm forgetting.
20130801:
Paths in init corrected, should fix mount issues from B5 to now.
Lockscreen rotation enabled even with switch in use by the ROM in overlay.
20130801-B2:
Redid init, should all be peachy again.
20130802:
Once again massive battles for no real obvious reasons besides I'm getting rusty.
Internal SD workd as it should
External SD works as it should
USB Storage ability added
Settings>Storage crash corrected, no longer force closes
Should now be back to a daily driver usable status, so please do further testing on audio, etc and report back your findings. @hardslog, this update may finally be good enough for an updated base lol
20140404:
Updated source
Trees are 99.9999% the same as last build, with one change:
Remove unsupported overlay
Won't, or shouldn't, have any apparent changes.
Built on request from our Russian cousins.
Thanks:
waydownsouth - for working with me enough to even begin to comprehend what he's done for the Iconia devices.
randomblame - for helping me getting jellytime up on the A100 and helping me out with random ideas and interesting conversations in IRC.
ntan97 - being my tester in IRC for the most random ideas I've ever had.
justjackyl - for being my go to guy for testing anything I do for the A100.
Cyanogenmod - for obvious reasons.
Google - for obvious reasons.
The team behind Acid Audio
The guy(s) behind Awesome Beats
Everyone who's donated, its appreciated
I'm sure I missed some, if I did it's nothing personal.
Hey pio_masaki,
I don't know what it takes to build a rom, but I have an A100 and would like to see this thing get some good 4.1/4.2 action going. I'm alright with a command line and I actually do QA for web programmers for a living. And I really want to learn more about android.
If you build em, I can test em and report back. On this CM10 build or your Jellytime Sosei. What do you think?
kiden said:
Hey pio_masaki,
I don't know what it takes to build a rom, but I have an A100 and would like to see this thing get some good 4.1/4.2 action going. I'm alright with a command line and I actually do QA for web programmers for a living. And I really want to learn more about android.
If you build em, I can test em and report back. On this CM10 build or your Jellytime Sosei. What do you think?
Click to expand...
Click to collapse
4.2 will not be an option from me, I don't have an a100 to even get it booting. Secondly, I don't feel like building a new twrp to handle an android version that may never be used on this device. Again, maybe if I had one, but its not worth the extra hassle right now.
Sent from my Thrive - Kuroikaze B18 - Balthesaur V2.71b
pio_masaki said:
4.2 will not be an option from me, I don't have an a100 to even get it booting. Secondly, I don't feel like building a new twrp to handle an android version that may never be used on this device. Again, maybe if I had one, but its not worth the extra hassle right now.
Sent from my Thrive - Kuroikaze B18 - Balthesaur V2.71b
Click to expand...
Click to collapse
Well if you want help with testing the 4.1 builds, I'd be up for it.
Have no fear
if you build it I'm gonna use it (ics or jb} am right proud of your work and enjoy using it.. thanks alot:good::good::victory:
Now I'm torn between this and Sosei.
I got Sosei exactly how I wanted, but I'm a junky for updated source as well.
Sent via Jellytime Sosei Bakedbean Iconia A100.
justjackyl said:
Now I'm torn between this and Sosei.
I got Sosei exactly how I wanted, but I'm a junky for updated source as well.
Sent via Jellytime Sosei Bakedbean Iconia A100.
Click to expand...
Click to collapse
I hear that
Sent from my vangogh using Tapatalk 2
billypoke said:
I hear that
Sent from my vangogh using Tapatalk 2
Click to expand...
Click to collapse
That's the beauty of a Nandroid!
Sounds like I need to stop making more then one ROM for you poor users
Sent from my Galaxy Nexus using Tapatalk 2
pio_masaki said:
Sounds like I need to stop making more then one ROM for you poor users
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Lol nah
That's OK, you dev to your hearts content.
G2x-CM7 Nightly 11/18/12 Build, Trinity ELP Kernel
justjackyl said:
Now I'm torn between this and Sosei.
I got Sosei exactly how I wanted, but I'm a junky for updated source as well.
Sent via Jellytime Sosei Bakedbean Iconia A100.
Click to expand...
Click to collapse
Yeah same here. Nandroid will help me decide and I can switch back if need be.
Sent from my A100 running Jellytime Sosei Bakedbean using xda premium
pio_masaki said:
Sounds like I need to stop making more then one ROM for you poor users
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
B-b-but I like having choices!
Sent from my SCH-I535 using Tapatalk 2
First off thanks pio for making yet another rom for our device. I was able to load this up before work and play with it for a few minutes. It seemed very smooth and responsive. Two minor things I noticed 1.The bottom part of the clock was cut off in the status bar even when I expanded it and it happens in landscape and portrait 2. When switching apps in portrait mode the top 75% of the screen is grayed/dimmed for the background but the bottom is still normal. Unlike in landscape were the whole background is grayed/dimmed.
Neither of these issues are serious or deal breakers though just a couple minor things I noticed.
If this sounded confusing I will try to attach some screenshots when I get home.
Once again thanks Pio.
Sorry to ask, but must i flash b2 over b1 or can i just flash b2. Coming from a different rom.
rain987 said:
Sorry to ask, but must i flash b2 over b1 or can i just flash b2. Coming from a different rom.
Click to expand...
Click to collapse
You don't need to go in order, but follow the directions for coming from another ROM. In short, full wipe.
Sent from my Galaxy Nexus using Tapatalk 2
Battery... why are you always so low when I find delicious new builds...
Thank you from the bottom of my heart ..
nsmith4 said:
First off thanks pio for making yet another rom for our device. I was able to load this up before work and play with it for a few minutes. It seemed very smooth and responsive. Two minor things I noticed 1.The bottom part of the clock was cut off in the status bar even when I expanded it and it happens in landscape and portrait 2. When switching apps in portrait mode the top 75% of the screen is grayed/dimmed for the background but the bottom is still normal. Unlike in landscape were the whole background is grayed/dimmed.
Neither of these issues are serious or deal breakers though just a couple minor things I noticed.
If this sounded confusing I will try to attach some screenshots when I get home.
Once again thanks Pio.
Click to expand...
Click to collapse
I can confirm this report about the UI, it looks as though it is out of scale (status bar, notification bar). What I'm guessing is another side effect of this is that when you hold Home and slide up to open Google search, the Google Arc and button are offset about 150 or so pixels to the left.
Also, I'm experiencing that the back button becomes slightly unresponsive after a while, this can be fixed by going to CM Settings > Navigation Bar > Reset to defaults.
Guys reporting random bugs is really quite pointless, I can't fix what I don't have. These are basically a nightly cm10 build to keep you guys updated, I can't test or fix anything wrong with them, I don't have one.
Sent from my Galaxy Nexus using Tapatalk 2
[ROM] KTU84Q [AOSP] 【4.4.4】Dan&Ktoonsez 【CM (final) 09-18-2014】
CM Edition by Dan & Ktoonsez, Stable releases only
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WE ARE NOT RESPONSIBLE FOR ANY BRICKS, PLEASE MAKE SURE YOU HAVE READ THE INSTALLATION INSTRUCTIONS IN THIS POST
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Information
These are the monthly releases of CM with some modifications and touch ups that will be listed below, They are meant for users who want a stable ROM without the need to flash nightly releases and risking a Nandroid, anyone who has enjoyed the stability of my Google Edition ROM should give this a go
all builds have their core features tested (Camera, bluetooth, bluetooth audio, tethering, USB audio, Data, Voice calls etc), I also adb debug each release and look for any redflags, I then set up the phone and daily drive it with a few of my testers and once I deem the release stable it will be posted here.
Note: The CM camera works but it's not the best, SnapCam HDR (Paid app) from the market is much more stable and has a ton more features (these developers only focus on the 4.4 open source camera and making it better), I highly suggest doing what I do and removing the stock Camera and Gallery and using this awesome app which also includes a gallery with more features, myself and ktoonsez swear by it. The stock files are found in system/app.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Features
-CM Stable branch based
-Updated and debloated gapps
- No rom branding - I don't flash my name around in the settings menu anywhere, keeping it stock AOSP.
-Stock CM kernel
-Nova launcher
-Improved CM Auto brightness values (Stock is way to Dim)
-Android L boot animation
-adb shell fixes
-Ext SD permissions added in platform
-Zip aligned
-No extra bloat
-Settings menu revamped and more organized
-Teleservice event notification options removed as they are not working
-Tested by an established developer and solid testers before release goes live to the public
-Enjoy!!
Kernel source: here
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Working:
Data
Wifi
Tethering
Bluetooth
Camera
USB Audio
GPS
Sensors
Not working:
Nothing reported by my testers
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Installation instructions
Make a Nandroid and make sure you are on the latest recovery
-Full wipe
-Flash ROM
-Flash Gapps (please only use the one provided in this OP, It's the latest 4.4.4 PA minimal GAPPS that are tested and working perfectly)
AT&T & Verizon only: Loki patch the kernel unless you're recovery does it for you
-Reboot
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Changelog
09/18/2014 (Final 4.4.4 build)
-Reverted back to m9 due to some pretty serious bugs in CM m10 that we caught late
-fixed settings strings and crash in MMS limit
-updated changelog in settings-about
-reverted ad blocking due to some problems, ill leave this to you guys
-FULL wipe again, I'm sorry, get titanium backup to make this easy
Code:
[B]09/16/2014[/B]
-Synced to 09/15
-CM kernel has been redone, synced to latest linux 3.4.103
-IR kernel updates, SmartIR remote will now work, out of date IR apps will not work until they are updated
-Theme Engine: Themes support for additional UI elements
-Frameworks & Core Apps: CAF and other upstream updates
-Settings: Add scramble pin feature
-Frameworks: Long press recent apps to switch to last used app 19
-Settings: Add soft reboot option
-Add smart cover support
-Multisim updates
-General bug fixes
-ANT+ Support for various hardware
-Privacy Guard: Control NFC permissions
-Event notifications removed from teleservice menu
-Platform permissions edited
-Fixed shell scripts in adb
-removed CM bug reporting
-more I might be forgetting
[B]GAPPS updated, you MUST full wipe this release[/B]
[B]08/10/2014[/B]
-ADB shell fixed, script manager will now work on CM 11 M9
-Removed Proximity Wake feature from m9 as it does not work
-edited another string in settings>security
-not much else, last build as I think this is way more stable then any other CM build out there.
[B]*dirty flash if coming from previous release is fine, just wipe caches first, no need to flash gapps unless full wiping*[/B]
[B]08/05/2014 stable 2[/B]
-Added Media_RW permissions to the permissions platform to add support for many third party apps (CM has yet to address this)
-CM OTA disabled
-Removed Calendar, grab it from the market so you can get updates via google
-Edited a few strings in English US and English GB
Dirty flash is fine (wipe caches, flash update, reboot - do not flash gapps again), as stated in the OP any new users should use the GAPPS I provide in the OP as they are a 100% up todate and minimal, anything you may need is downloadable from the market,
[B]06/01/2014[/B]
I was VERY happy with how 5/31/2014 ran on my phone but noticed a few commits merged last night that were authored by bossman Cyanogen himself, so here is your changelog. I feel like the foundations of this ROM are set now which I knew would take a few builds
so if all goes well with this, I will start bi-weekly releases because I'm extremely sick of full wiping/testing/compiling, I just wanna use my phone as a phone!!
stagefright: yield callbackDispatcher to writer only for video
libstagefright: Fix to handle EAGAIN error on first read to source
audio: mute duration at the beginning of recording
Bluetooth: Fix for device gets stuck in pairing
Bluetooth: turn on lcd during Connection
camera: Disable extra HDR frame on QCOM_HARDWARE - HDR fix for third party apps
appops: Fix WIFI_SCAN AppOp permission index
nxp: Include support declaration for Mifare tags
[B]Everything but the app ops commit was merged into the stable branch of CM 11, these were necessary changed to warrant an update[/B]
Enjoy!
[B]05/31/2014[/B]
Settings: Allow access for external apps to launch ThemeSettings Fragment directly
Mms: Clear notifications and mark messages read in certain situations
Calculator updated with many new features
selinux: enable support for bionic, add applets in config
Revert "Remove smiley support"
Revert "idmap: Don't log spam "CREATING STRING CACHE"
idmap: reduce CREATING STRING CACHE verbosity
Merged latest cLock widget
Added Stock MMS back in the build as it's theme friendly
Made number picker dialog in MMS and Contacts a neutral gray so no theme will make the txt invisible
Option to show missed notification count in Interface>Statusbar now works for Email/Gmail
Included Apollo in the build to play nice with lockscreen targets, feel free to remove yourself
Removed open music app on headset connect, does not work on most music apps including poweramp
Updated kernel, Init binary in the ramdisk is now the latest from CM
[B]05/30/2014[/B]
Settings: Disable Battery status preference on ModLock.
Fix wallpapers not applying in full screen
Alarm: Show a warning toast when alarm volume is set to silent
CM11 Themes: Don't kill setup wizards
Correct string for left-handed mode (Camera + settings)
Menu button fixed for webkit apps (TiBU, GO SMS etc)
Added equalizer quick panel toggle
Burst mode removed from Camera until it's fixed upstream
default alarm tone set
Kernel updated to the latest
more that I'm probably forgetting but this is the important stuff
[B]05/27/2014[/B]
SystemUI: Make wifi combo margin themable
wm: Underp menu key release processing (doesn't effect Titanium so don't ask, thats a TB bug)
Fix circle battery opaqueness for the low battery color
Reduce memory leaks by removing all views.
CMAccount: fix setup wizard crash
Themes: Add read/write permissions - 2 commits
Fix broken tags
Remove Status bar notification count checkbox preference <--- main reason for this update, I don't like broken toggles in my settings menus, no idea why CM just leaves them in there, it's rather annoying when there is ZERO java controlling them
every other commit is super minor but we are fully synced up to date with CM
[B]05/26/2014[/B]
A2DP: Stop spamming log with buffer size
Make KeyguardMultiUserAvater fully themable
CMAccount: Remove "or" between account buttons
Add/fix APns
Add rules to permit CTS security-related tests to run
Remove event notification checkbox preference
Note: You can dirty flash my updates but you can't report bugs in my thread until you repeat them on a full wipe. Thanks :)
[B]05/25/2014[/B]
-Initial release (Tested by myself and testers :) )
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Download the latest build here
md5: 35e20241ac9450e4dd0bd48c927b07fe
GAPPS - here (Please use this one as it is up to date, minimal and works perfectly)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Credits
Google
CM Team <--- not possible without these guys
Paranoid Android - Great Gapps packages
ktoonsez - <---- would be possible without him, just wouldn't be as good
Hawkerpaul - Amazing tester
mrvirginia
XDA
Broodplank - Devdistro linux, makes my life easy
Kryten2k35 - Themes
Googy_Anas - Great kernel support for the s4
Faux123 - This guy is the man
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If you would like to support me, Donate here I've spent countless hours on my projects with many sleepless nights. Donations are appreciated and keep me motivated :highfive:
Need help? Follow me on twitter and and I will answer any ROM or Android questions.
reserved
1 more reserve
this went live yesterday for t-mo and at&t, feedback has been excellent
enjoy!
Thanks for this again Dan.
Just to let everyone know, Dan's CM rom is an absolute keeper. Been on his GE rom for many months now which has been brilliant, and i never thought i would come off it until i tried this rom.
Been on it for a couple of days now as Dan was kind enough to give me a test, and all i can say is up to now it is totally faultless! I don't even need to install Xposed/gb any more as this does pretty much everything you will ever need as standard.
Great work mate, and many thanks again
Sent from my GT-I9505 using XDA Free mobile app
Can't wait to try this! Downloading now
Does art work on this ROM? Cant wait to test this out:laugh:
N!KE26 said:
Does art work on this ROM? Cant wait to test this out:laugh:
Click to expand...
Click to collapse
yes but read the disclaimer when you activate it same idea for this thread ok mate?
Thanks
Been using your GPe ROM untill now, love it, think this one is even better. Thanks :laugh: 1D3964214C481111X
are s-view cover calls working in either this or your google edition rom?
Gloris said:
are s-view cover calls working in either this or your google edition rom?
Click to expand...
Click to collapse
s-view cover calls are proprietary code from Samsung and will only work on touchwiz at the moment, I'm waiting to see if they implement it into 4.4.3 GE because they gave it the shaft in 4.4.2.
I too have been using your google rom for ages, time for a change :good:
ok, thanks.
in which case, would including this app within the rom run any differently than if i just install is the normal way?
https://f-droid.org/repository/browse/?fdid=org.durka.hallmonitor
have heard great reviews about your roms, as i've been looking for a fairly plain/clean rom that's totally bug free and good to go for my daily driver, but most things i've tried have had call issues or other sound bugs and random reboots. your rom's seem pretty stable by all accounts, but i really want s-view cover to work.
the hall monitor app is the best i;ve tried, but sometimes still a bit glitchy, so just wondered if it's any different including it in a rom compared to installing the apk (and then maybe using TB to convert to system app or soemthing like that?)
siliconaddict said:
Been using your GPe ROM untill now, love it, think this one is even better. Thanks :laugh: 1D3964214C481111X
Click to expand...
Click to collapse
Thanks man!!!!
hawkerpaul said:
Thanks for this again Dan.
Just to let everyone know, Dan's CM rom is an absolute keeper. Been on his GE rom for many months now which has been brilliant, and i never thought i would come off it until i tried this rom.
Been on it for a couple of days now as Dan was kind enough to give me a test, and all i can say is up to now it is totally faultless! I don't even need to install Xposed/gb any more as this does pretty much everything you will ever need as standard.
Great work mate, and many thanks again
Sent from my GT-I9505 using XDA Free mobile app
Click to expand...
Click to collapse
Whats the battery life like in comparison to the GE rom?!
@Danvdh
What are the main benefits from this rom over GE's?
HaTrED_ said:
@Danvdh
What are the main benefits from this rom over GE's?
Click to expand...
Click to collapse
It's a later revision of 4.4.2, KVT49L. It also doesn't need gravitybox for the goodies, Everything works well, battery is good and it's just as fast. try for yourself mate, I'm enjoying it but that doesn't mean I plan to abandon my GPE ROM, It's just done it's development cycle and I'm waiting for 4.4.3 to do any further work on it. (next decade or century lol)
Some people might prefer google play edition because they want just a vanilla android experience with no extra features, as for this ROM nothing is reported broken, I'm getting better bluetooth performance as well! Camera is looking good, I have no problems with Instagram camera either using both front and back for video and pictures, it seems more and more apps are supporting open source drivers!
So yeah, the choice is yours mate, try it out and if you like it, stick with it, if not just use my GPE, you don't have to worry about it because I'll be supporting both for as long as I have this device (I don't ever plan on selling it if I get another phone, you will probably leave the S4 before I do) either way, I have ROM that makes my userbase happy so its down to whichever you prefer, userbase happy = Dan and ktoonsez happy
Jrhoop said:
Whats the battery life like in comparison to the GE rom?!
Click to expand...
Click to collapse
it performs very well mate, I'll need to go through a few cycles to know for sure but it's definitely not worse, it also depends on how you setup your kernel settings in ktweaker and what apps you use, some apps ppl need push notifcations wakelock in the background, the more of these you have the faster you will drain, but to answer the question in more detail, if you were to flash this and my GPE on 2 S4's and not install ANYTHING and keep both phones clean with no apps, I'm sure you will see very comparable results, Ktoonsez has been using CM for ages and he get's like 3 days on a single charge if not more... he's OCD with battery life
Gloris said:
ok, thanks.
in which case, would including this app within the rom run any differently than if i just install is the normal way?
https://f-droid.org/repository/browse/?fdid=org.durka.hallmonitor
have heard great reviews about your roms, as i've been looking for a fairly plain/clean rom that's totally bug free and good to go for my daily driver, but most things i've tried have had call issues or other sound bugs and random reboots. your rom's seem pretty stable by all accounts, but i really want s-view cover to work.
the hall monitor app is the best i;ve tried, but sometimes still a bit glitchy, so just wondered if it's any different including it in a rom compared to installing the apk (and then maybe using TB to convert to system app or soemthing like that?)
Click to expand...
Click to collapse
will perform the same I'd imagine, User app just needs you to confirm permissions, System app automatically approves the permissions, System app might be better for something always running in the background however
when i calling, i do not see call waiting notification . its not working .. :/
it works with google edition..
kabalah89 said:
when i calling, i do not see call waiting notification . its not working .. :/
it works with google edition..
Click to expand...
Click to collapse
goto dialer settings and set it to vibrate mate
cool a new rom from Dan&KT, thx for this guy's.
Danvdh said:
explain more please, you should hear a tone when a call comes in, you can also goto the dialer settings and set it to vibrate too mate
Click to expand...
Click to collapse
i have poor english sorry.
when i call my friend, if he's talking in phone with another person, so it displays a notification "call waiting" (event notification). So i can see if the person speaking on the phone or not.
screenshot i found on google:
https://jira.cyanogenmod.org/secure/attachment/10540/Event notification.png
its working perfecktly on your google edition rom..