For people who can't see any difference in volume + - Samsung Galaxy Nexus

Ok,so first go to music and disable the equalizer.Then go to volume + and hit speaker settings ;click speaker modifications and go to volume lvl +1,after 0;+2 after again 0 to your lvl you wanna have it.I am not responsable if you broke you speakers by clicking a high level.I hope I was helpful and works for you

Related

REQUEST - Volume Control

Ive been searching everywhere for this but either nobody has thorght about it or its not possible.
with my Touch HD the volume is far to loud to listen to music as background music or through earphones and the HTC volume control step size for the volumes is too big. its either off, medium, loud or very loud!
the default WM6.1 control is even worse!
i know that you can use your finger to adjust the HTC volume control but this still isnt sensitive enough for me.
and i also know that it is possible to adjust the volume through tweak HD or advanced config. only problem with that is that I want to be able to chose to listen to very quite music or turn it up very loud without having to go through one of those settings.
so i was wondering if anybody could make a program that either has a large step size or a user defined step size for the volume and that is activated/volume through the volume buttons.
Thanks!
P.S sorry if this is in the wrong section or if there is a requests thread but i couldnt find it.
Ok i havnt found exactly what i wanted but i did find this:
http://handheld.softpedia.com/progDownload/Volume-Control-Download-35536.html
this is an aplication which lets you choose the volume with 100 steps. and it works from the system volume so using somthing like nitrogen or media player there is another 100 steps giving me 10000 steps haha
the bad points are that you must go into filemanager and manualy start it. and even then it does not work with the volume buttons.
(if anyone knows of a way to start this when powering on the device that could be useful!)
its good but not ideal.
if anyone else can come up with somthing better speak up!
create a shortcut to the exe and add it to /device/windows/startup ?
Yep, would be nice if the volume rocker can use this little tool.
Hello,
Any news on that topic ?
Thanks
I have the same problem, i think the stepsize can be changed in the registry but i dont know where i could find this.
Just to let you know the Volume rocker switch adjusts sound in 3 steps at a time. But during music play back you can use finger or stylus to adjust volume bargarph displayed on the htc HD screen in single step and thus volume is more finely controlled. There is no need to make registry changes.
The problem is, if youre using the E100 headset (or just want to press a button in your pocket to adjust volume) it would be nice if it'd adjust 1 step instead of 3 when pressing volup or voldown..
If youre moving and just want to adjust volume its really annoying to get your phone out of your jacket/pocket, pull out your stylus and lower your volume to 1..... might be just me that is a lazybones, but still!
With Good intra headset, even one bar is too much. Is it a WM limitation that the stepsize is that big ?
khanms said:
Just to let you know the Volume rocker switch adjusts sound in 3 steps at a time. But during music play back you can use finger or stylus to adjust volume bargarph displayed on the htc HD screen in single step and thus volume is more finely controlled. There is no need to make registry changes.
Click to expand...
Click to collapse
The actual problem is that 1 bar (out of the 15 available), ie the quietest setting the system is capable of, is TOO loud. I wouldn't dare use headsets at 10 bars (out of 15), the sound level would blow my eardrums out.
What we'd like to do is change the "range" of volume output - so that the output power is a LOT lower at low settings, while remaining loud enough for public broadcast (ie from the speaker on the back) at higher settings.
Anyone?
Same issue here. The minimum volume is still way too high. It's a waste of battery and could hurt your ear if you use in-ear earbuds.
Riceburner said:
The actual problem is that 1 bar (out of the 15 available), ie the quietest setting the system is capable of, is TOO loud. I wouldn't dare use headsets at 10 bars (out of 15), the sound level would blow my eardrums out.
What we'd like to do is change the "range" of volume output - so that the output power is a LOT lower at low settings, while remaining loud enough for public broadcast (ie from the speaker on the back) at higher settings.
Anyone?
Click to expand...
Click to collapse
As an addition.... I think this "too much volume" thing is something to do with the HTC TF3D music player itself.
On my (stock Rom) HD - I can listen to the FM radio at "normal" volume levels (ie about halfway up the range), but with the TF3D player - I have to turn it right down again.
Haven't tested it with other players (eg TCPMP).
Another request for a better solution to volume control.
bumpity
I have the same problem, ever since getting a set of in-ear MM50 (Sennheiser).
Too loud!
Any ideas?
gromitt said:
Another request for a better solution to volume control.
Click to expand...
Click to collapse
You may edit the registry file:
Local_machine\software\HTC\VolumeOverlay\SavedHand SetVolume
Change DWORD to 0
(soft-reset not needed)
plug in the headphone and adjust the system volume (press the volume button on side of the device and adjust the volume that is most soothing through the headset and it will memorize it! Once you pull out the headset the volume through the system speaker will be amplified as set by step 2 below. Plugin the headset again and the vol. will revert back to the headset volume level that you adjusted above).
You can always increase or decrease headset volume using the volume switch from this point and this new level you used is memorized during next headset insertion and automatically adjusted.
Step2,
This will tweak the volume that you want when headset is not plugged in.
But remember this will be the maximum volume through the speaker and you can only decrease it using the device volume button, not increase it.
You may have to experiment a few times until you get to a satisfactory volume level (don't forget to soft-reset after tweaking each time. I found 40 to be quite reasonable.
Local_machine\software\HTC\AudioManger_eng\Config\ music_player_volumn
Change the DWORD to 10 (you may have to adjust it to suit the volume you want when the headset is unplugged. In fact 10 is too low and I found 40 to be more reasonable) or lower(I think even 10 is too low!) and soft-reset the device.
the music will become lighter in the TouchFLO3D music player
I did both of the above steps and it solved the problem dramatically! It works even if you are using other software players(windows media player etc)
Edited by,
Fulham
Originally the solution came from maklik from another forum)
fulham said:
You may edit the registry file:
Local_machine\software\HTC\VolumeOverlay\SavedHand SetVolume
Change DWORD to 0
(soft-reset not needed)
plug in the headphone and adjust the system volume (press the volume button on side of the device and adjust the volume that is most soothing through the headset and it will memorize it! Once you pull out the headset the volume through the system speaker will be amplified as set by step 2 below. Plugin the headset again and the vol. will revert back to the headset volume level that you adjusted above).
You can always increase or decrease headset volume using the volume switch from this point and this new level you used is memorized during next headset insertion and automatically adjusted.
Step2,
This will tweak the volume that you want when headset is not plugged in.
But remember this will be the maximum volume through the speaker and you can only decrease it using the device volume button, not increase it.
You may have to experiment a few times until you get to a satisfactory volume level (don't forget to soft-reset after tweaking each time. I found 40 to be quite reasonable.
Local_machine\software\HTC\AudioManger_eng\Config\ music_player_volumn
Change the DWORD to 10 (you may have to adjust it to suit the volume you want when the headset is unplugged. In fact 10 is too low and I found 40 to be more reasonable) or lower(I think even 10 is too low!) and soft-reset the device.
the music will become lighter in the TouchFLO3D music player
I did both of the above steps and it solved the problem dramatically! It works even if you are using other software players(windows media player etc)
Edited by,
Fulham
Originally the solution came from maklik from another forum)
Click to expand...
Click to collapse
i just proud of my name is being posted by other
None of these thins work with noise isolating headphones where 1 bar is too loud. As soon as the phone starts to ring you are deafened as the volum is A LOT LOUDER than the music. I have the same problem with WMP as I can set a low volume in system, 3 bars, and 15-40% in WMP or an other program and the music is fine but as soon as the phone rings it absolutely kills!
man if someone solves this they'll make a few insta-friends !
We need a fix.
Many this app will help some, if not all of you !
It's a freeware developed by a member of this forum and it serves the simple purpose of allowing to set "volume steps" and replacing the default volume window. It's brilliant.
Work is still in progress, but it's already a must have at this point
http://forum.xda-developers.com/showthread.php?t=598997

[Q] a single volume control?

android is great. it really is , its the best thing to ever hit cell phones. however theres one feature i miss that i havent been able to find. im sure you all remember the old school flip phones and what not. the volume buttons on the side controlled all the volume at once. you turned it up and ALL of your phone volume was up, you turned it down and likewise. now with android you have , call volume , ringer volume, system volume, media volume etc. i hate having to go into my options and turn 5 or 6 different bars of volume control up and down. so my question is , is there an app or a mod (without rooting) that i could get that would make the volume buttons control all the volume at once like the old school phones? i could also live with a widget that would do this as well i suppose.
Audiomanager.

how do you lower BT volume

I have a plantronics discovery 925 and I made a custom ear mold for it. Perfect fit and holds in the ear great. Now i have a side effect...IT IS TOOOO FRICKEN LOUD!!!! yes i hit the button to lower the volume on the headset and the phone. It sounds like a mega horn in my ear...If I can figure out a way to lower the volume it would be perfect. Is there a setting somewhere to lower the volume or a some way to add something to change how low is low on the volume???
thanks for any info..
just use volume up or down when you are in BT mode
Menu -> Settings -> Sound -> Volume -> Move the media slider down.

Volume+ semi-functional, still too low in-call volume

Initially, my nexus's speaker volume and incall volume are both really low even at maximum settings. After browsing around xda, I found people recommending volume+ so I paid $1.62 and got the full version. Speaker volume is loud enough now, although I feel the quality is not very good. I don't use speaker to listen to music so it's not a big problem.
There's also in-call volume setting in volume+. I set it to 90 and strange things happens: When I use skype, in call volume is extremely high, I can almost treat it like I'm on speaker. It feels like the settings are working. However, for regular calls, the in-call volume stays the same, still too low for most cases. I can only hear people in quiet rooms. I barely hear anything on a street. Setting in-call volume to other numbers doesn't change the result. So my result is volume+ is only semi-functional. Any other fix for in call volume?
In call volume is the only api not exposed so it cant be increased. Btw everyone goes for volume+ but equalizer by smart apps is free and i much prefer over volume+.
Anybody has any other ideas? Low call volume is really annoying
Still nobody? Everyone‘s incall volume is loud enough?
Basically what the guy above just said:
androidforums.com/showthread.php?p=3927479
Sent from my Galaxy Nexus using Tapatalk
Just did a test:
Removed in call settings
Speaker to +10
Called *611 (bell customer service) let the automated machine start talking..
Click volume down on rocker a few times then clicked volume up a few times and the sound increasef to am acceptable level.
However when i clicked up one to many times it almost mutes volume but the onscreen indicater is at max (found this odd).
Saw this on the thread you gave. I have the same situation. There exists a maximum in-call volume at around 3/4 of the bar. It's enough for regular use but still a bit low
low volume on calls
Still no one comes with a solution, the volume on the gnex is very low on call especially outside...thanks
luculuc said:
Still no one comes with a solution, the volume on the gnex is very low on call especially outside...thanks
Click to expand...
Click to collapse
I have the same problem using ZTE Blade... volume+ didn't work.
I think there solutions, many roms developer put on their changelog things like "in-call volume boosted" then I ask how you did that and no one anwers...
Anyway I did some research and I found on the rom i'm using a file named libaudio.so that says:
Setting in-call volume to %d (available range is 0 to 7)
Guess that for me increasing steps with volume+ only has efect until 7...
Maybe i'm being stupid... can someone with more experience analyse this?

[Q] Call volume attached to media volume

hi guys. Gmaster here. small question...when my incall volume gets turned off (as low as possible) my media volume becomes quiet (even at full blast) but when the incall volume is maxed out so is my media volume (even at volume lvl 1 if you know what i mean.) is this a normal bug or what? before some people ask, im using the latest stock rom. thanks in advanced to anyone who helps.
Sent From The Phone Of Gamers

Categories

Resources