Ive read every review in this section but i cant figure out which one to chose. I need a case for my gf that adds as little weight and bulk to the sgsII as possible while still offering more impact protection than the stick on body protectors. Any recommendations? Thanks in advance
Hekademos said:
Ive read every review in this section but i cant figure out which one to chose. I need a case for my gf that adds as little weight and bulk to the sgsII as possible while still offering more impact protection than the stick on body protectors. Any recommendations? Thanks in advance
Click to expand...
Click to collapse
this case is the thinnest ive found on any phone ive ever owned and it doesnt add much bulk and it still protects the phone real good.
http://www.amazon.com/gp/product/B0060N1PCI/ref=oh_o00_s00_i00_details
s10shane said:
this case is the thinnest ive found on any phone ive ever owned and it doesnt add much bulk and it still protects the phone real good.
http://www.amazon.com/gp/product/B0060N1PCI/ref=oh_o00_s00_i00_details
Click to expand...
Click to collapse
Yeah the TPU case is pretty neat I had one on my nexus and it felt smooth. Protection wise was ok I still didn't feel comfortable with it falling. I have the D30 case and it is slim lightweight and adds hardly any bulk. The downside is that the buttons are a bit hard to press and may take some getting used to. Their is a trick to work around it, but that's up to you. I think with either you won't go wrong, the silicon ones are terrible and get stuck in your pocket and provide minimal protection.
There is enough hate in the world. Why can't we all get along here ...?
If you want the THINNEST case the "incipio feather ultralight hard case" but be warned: all the research I've done indicates that case won't do jack **** if you drop your phone as one reviewer put it, its a cosmetic accessory not a protective one.
I went with the diztronix tpu case that the guy above with Amazon link has except in matte black. Its amazing adds little bulk and protects against falls pretty well. Its also matte on the back so it doesn't get stuck going in jeans, etc. Like other tpu cases do.
Sent from my SGH-T989
I'm going to get the incipio feather case, but its not a protection case. Its what I like though. I know a few others that like it, so you might. I usually get TPU cases for all of my phones, but I'm tired of that route. I'm looking for other alternatives too though.
Incipio Feather
s10shane said:
this case is the thinnest ive found on any phone ive ever owned and it doesnt add much bulk and it still protects the phone real good.
http://www.amazon.com/gp/product/B0060N1PCI/ref=oh_o00_s00_i00_details
Click to expand...
Click to collapse
I have that exact case. Just got it last week and absolutely love it. No bulk, feels so damn smooth, and adds no weight. I had the body glove 2-piece case and that was too bulky. The Diztronic is definitely well worth the $10.
just bought the diztronic Matte Back Translucent Smoke Flexible
garyx24 said:
just bought the diztronic Matte Back Translucent Smoke Flexible
Click to expand...
Click to collapse
That's what I got few days ago. I ordered the high gloss translucent smoke but I got the matte version instead. Waiting for a reply back when they get back into town from some convention. Thinking on getting the matte black now.
I've been using these TPU cases for 3 years or so now. Nexus One, G2x, Xoom, and now my SGS2.
I also like that they're easy take on and off for a quick battery pull or going into a dock. Even after multiple pull ons and offs, they don't stretch, sag, tear. They are great for the price.
shorty87 said:
I have that exact case. Just got it last week and absolutely love it. No bulk, feels so damn smooth, and adds no weight. I had the body glove 2-piece case and that was too bulky. The Diztronic is definitely well worth the $10.
Click to expand...
Click to collapse
i bought that TPU case as well...very good case, thin and seems that it will protect the corners a little bit.. worth the $6
thanks for the help guys. She went with the Incipio. I let you all know if it fails.
diztronic Matte Back Translucent Smoke Flexible came today and i've gotta say it's a very good case. Very thin, flexible, good grip, and gets the job done
If I can get one that ships to Canada, I'm going for the Diztronic as well.
I don't like how the Incipio doesn't cover the top and bottom of the phone. WHat's up with that.
garyx24 said:
diztronic Matte Back Translucent Smoke Flexible came today and i've gotta say it's a very good case. Very thin, flexible, good grip, and gets the job done
Click to expand...
Click to collapse
I just picked one up as well, came in yesterday and it's very nice
unlvmike said:
Yeah the TPU case is pretty neat I had one on my nexus and it felt smooth. Protection wise was ok I still didn't feel comfortable with it falling. I have the D30 case and it is slim lightweight and adds hardly any bulk. The downside is that the buttons are a bit hard to press and may take some getting used to. Their is a trick to work around it, but that's up to you. I think with either you won't go wrong, the silicon ones are terrible and get stuck in your pocket and provide minimal protection.
There is enough hate in the world. Why can't we all get along here ...?
Click to expand...
Click to collapse
What is the trick for the d30 (impossible) buttons
Dougshell said:
What is the trick for the d30 (impossible) buttons
Click to expand...
Click to collapse
You take an exacto knife and cut below and above the buttons.
I remember reading it from a thread on here. After a lot of usage mine is a lot easier to press. Didn't cut them.
http://www.youtube.com/watch?v=j9LBhRuMWP8Sent from my SGH-T989 using xda premium
Bodyglove
Sent from my SGH-T989 using Tapatalk
I have the Incipio and its a delight
Sent from my SGH-T989 using XDA Premium App
Dougshell said:
What is the trick for the d30 (impossible) buttons
Click to expand...
Click to collapse
There's another option that someone on XDA mentioned which requires sticking a small bit of paper to the inside of both buttons. He also included pictures in the post (do a search). This way you don't cut into your d30 case and reduce the life of the buttons. I found some glossy paper from an ad, a little bit thicker than normal print paper, and used a small piece of scotch tape to attach it underneath the buttons. It worked like a charm.
Related
I am looking for a new case for my captivate and seem to be at a stand still. I had the Incipio Edge clear case cause when I got my phone that's all they had at AT&T. I also didn't know the case comes directly from hell! Seriously, don't get this case no matter what. Your phone is better off naked then with the Edge. Anyway, I am wanting something that isn't to expensive, cool looking, and that will protect the phone well. I have looked at the Amzer Silicone color cases but was wondering if anyone had and liked it. Also have looked at Body Glove, but still unsure of what to get. Please whatever case you have drop a response and tell me what it is and if you like it. I would appreciate all the help I can get finding the right case that I know other people have and like. Thanks fellow Captivated Android fans!
Sent from my SAMSUNG-SGH-I897 using XDA App
Captivatedguy7 said:
I am looking for a new case for my captivate and seem to be at a stand still. I had the Incipio Edge clear case cause when I got my phone that's all they had at AT&T. I also didn't know the case comes directly from hell! Seriously, don't get this case no matter what. Your phone is better off naked then with the Edge. Anyway, I am wanting something that isn't to expensive, cool looking, and that will protect the phone well. I have looked at the Amzer Silicone color cases but was wondering if anyone had and liked it. Also have looked at Body Glove, but still unsure of what to get. Please whatever case you have drop a response and tell me what it is and if you like it. I would appreciate all the help I can get finding the right case that I know other people have and like. Thanks fellow Captivated Android fans!
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
I have the Body Glove Silicone case. I like it because it adds nice protection without much extra heft.
gunnyman said:
I have the Body Glove Silicone case. I like it because it adds nice protection without much extra heft.
Click to expand...
Click to collapse
+1 It's a very nice case. Doesn't grip my pocket lining like most silicone cases. I usually prefer my phone naked, but after destroying my iphone 3g I figured I'd better be safer lol.
yes Body Glove FTW!!!
btw check the thread 'other source of Body Glove case' for cheaper deal than att.
I'm personally using the Amzer Jelly Case (which actually feels fairly solid) http://www.amzer.com/Amzer-Silicone-Skin-Jelly-Case-Black-P88806.htm
available in a ton of colors and I like the elongated-X shape on the back. I'm not sure how it is with the other colors, but the white one shows it as being very opaque when it is partially translucent (I can still read the Galaxy S on the back)
haha yea trust me DO NOT get the stock cases that are 19.99...i hate it lol
I'm using the amzer crystal snap on case its great and for the price it's worth. Great look and feel with out adding much to the phone.
Sent from my SAMSUNG-SGH-I897 using XDA App
Bodyglove
I just got the Body Glove Mirage case also. I originally bought the OEM Carbon Fiber case directly from Samsung but returned it because it wouldn't snap closed completely. I liked the material because it felt sturdy with a nice grip but was concerned about the noticeable gap from the 2 pieces not closing properly.
The Body Glove is the best one I've seen so far although I'm not that fond of the design on the back. But it protects my phone so it's good until I find something else.
SeidioOnline has the Innocase II Surface that's "Coming Soon" which looks pretty decent. It actually looks similar to the Samsung Carbon Fiber but instead of 2 front and back pieces snapping together, it looks like a top and bottom piece kind of slides onto the phone.
Another one for Body Glove. Nice looking case and it does its job with not alot of bulk. I am looking forward to the Otterbox cases but its doubtful anything will impress me. Just too bulky but I like the protection they offer so we shall see
I am very happy with the zagg invisishield. I like that you really can't see it.
So far I have the Zagg Shield and the Body Glove Skin. But I think I'm going to get the new Body glove snap on case with the kickstand built into the clip. I find myself watching video more and more so the kickstand will come in handy.
And yeah I also made the mistake of getting the Incipio Edge case. That thing was awful. It took me 20 MINUTES to get the case off of the phone. I promptly returned it.
I currently have 3 cases. A clear plastic one from amazon. (pretty cheap and hard to get off, but a decent case for 3.99) then a clear smoke grey silicon jelly case from mr. hit (good case, add grip and looks nice too while adding protection for only 5.99!.) And the amzer luxe argyle tpu case. Which is a really nice case! A bit more pricey but worth every penny (14.99) I think. And I am a freak about protection, so underneath it all I have phantomskinz chromatic white carbon fiber stick on skin (for the days I don't wasn't to have a case on. And a plus is it looks really cool underneath the amzer luxe argyle case (and the clear smoke grey silicon one as well.)
I walked into an at&t store and a lady that worked there was amazed at my phone and showed it off to all of her co-workers.
All in all its really up to you and your taste. But IMO AMZER for the win. (or body glove tpu, as they are both tpu)!
Sent from my SAMSUNG-SGH-I897 using XDA App
argyle
i have the amzer argyle case (the whitish clear one) bought it from amazon and is like 2$ cheaper than the ones sold from main amzer.com. its great, the galaxy s on the back is very visible and offers protection just as good as the rubber body glove from att. way cheaper too.
I just got the body glove snap on case, with the belt clip. dosnt add alot of bulk to the phone, gives it a nice grip. good fit, all buttons and plugs easy to get to. also, found it on ebay for 17 bucks.
Body Glove Mirage case FTW!
dragonc12 said:
So far I have the Zagg Shield and the Body Glove Skin. But I think I'm going to get the new Body glove snap on case with the kickstand built into the clip. I find myself watching video more and more so the kickstand will come in handy.
And yeah I also made the mistake of getting the Incipio Edge case. That thing was awful. It took me 20 MINUTES to get the case off of the phone. I promptly returned it.
Click to expand...
Click to collapse
Love the zagg just a pain to put on though !
Body Glove - real world test
Luckily, I bought the Body Glove (Mirage) last week because I dropped my phone today from about 4 or 5 feet high and it landed on asphalt. It simply bounced once and stopped. No screen scratches and not even a nick (sp?) on the case. Good stuff!
Thanks to everyone for their recommendations. I ended up going with the Amzer Jelly case in green. Awesome case that really protects my phone. Highly recommend it!
Sent from my SAMSUNG-SGH-I897 using XDA App
Body Glove all the way!
Sent from my SAMSUNG-SGH-I897 using XDA App
I definitely recommend the Body Glove Mirage as well. I have had the saladin captivate for only a short time but the moment I put this case on my phone felt thee times more secure in my hand. The back of the mirage case is like no other rubberized case I have ever used. It has a wonderful texture that gives the back of the phone a lot more grip. I highly recommend this case to anyone, get one while they're in stock. Almost every store that carries it in my area has been out of stock.
Enkso
Sent from my SAMSUNG-SGH-I897 using XDA App
What is the best thinnest case for the samsung captivate!
Don't know what your parameter for "thin" is but I found the TPU cases from ebay to be the best. I had tried a BodyGlove case and a generic silicone case but found them too thick (the silicone case looked ugly too IMO - dull & attracted too much lint). The TPU case I got from ebay has been great - glossy yet grippy. Adds about a mm top & bottom.
I have tried three different cases and found that thr "Body Glove" seems to be the one I end up using the most. It is very thin, tight fitting and feels good while holding the phone. There are really several good choices around. This is of course IMHO.
Sent from my SAMSUNG-SGH-I897 using XDA App
i use the bodyglove case with the diagonal lines on the back. my brother uses the sedio one that snaps in 2 and has the smooth body. the body glove is a little thinner and looks more stylish. both are around 15-20 dollars. i prefer the body glove one because of the back actually, just adds a little touch to an otherwise plain looking phone. both are nice because they dont pick up dust and lint like the cheapo 2 dollar ones. you can tell quality by the seams of the rubber and smell. you get what you pay for. if your phone is worth 400, why spend 2 dollars on a case right?
fastkx450 said:
What is the best thinnest case for the samsung captivate!
Click to expand...
Click to collapse
How much protection are you wanting exactly?
Just picked up the Body Glove yesterday. Really like it, doesn't collect dust and very thin. Good fit also.
http://www.amazon.com/gp/product/B003VQS43U/ref=oss_product
Cheap, looks good (can't really see the pattern except at a certain angle), protects great, and is the thinnest protective case I've seen.
Check these out. They are not as sticky as regular silicone skins and they are fairly thin + cheap.
http://cgi.ebay.com/WHITE-TPU-CASE-...137991?pt=PDA_Accessories&hash=item3cb26715c7
http://cgi.ebay.com/SMOKE-Crystal-S...139274?pt=PDA_Accessories&hash=item5d2d4f700a
http://cgi.ebay.com/BLACK-TPU-SKIN-...791504?pt=PDA_Accessories&hash=item415455ec90
http://cgi.ebay.com/ORANGE-TPU-SKIN...810059?pt=PDA_Accessories&hash=item19c287018b
6 for 11$
http://cgi.ebay.com/6-x-Color-TPU-G...296126?pt=PDA_Accessories&hash=item3f06a32a3e
http://cgi.ebay.com/2x-Tpu-Gel-Case...544565?pt=PDA_Accessories&hash=item5ade97c375
http://cgi.ebay.com/Red-TPU-Crystal...340454?pt=PDA_Accessories&hash=item19c2cc2266
Body Glove is pretty darn thin. I have one but I replaced it with the Otterbox Commuter, just to change things up. Commuter is a bit thicker but I don't mind it at all so I am sticking with it. I do recommend the Body Glove though. Good sleeve.
Plus one for body glove.
Its perfect. Smooth enough that it comes out of pocket easy, but grippy enuff that I can throw it on dashboard without it flying off with the first turn I make.
I also think it looks great, fits perfectly, and I can hold the phone without dropping it-which is the reason I wanted it in the first place
are you looking for a hard case or skin? body glove or a tpu skin is your best bet for the thinnest protection but if you want a hard case then check out Seidio innocase surface
I just got a Xmatrix case (I think its a knock off as its not rubberized anywhere) but the fit is great and gives you a near naked feel. Covers the back and adds a bit to the front edge so the screen does not touch a flat surface if you lay it face down.
MobileNick said:
Don't know what your parameter for "thin" is but I found the TPU cases from ebay to be the best. I had tried a BodyGlove case and a generic silicone case but found them too thick (the silicone case looked ugly too IMO - dull & attracted too much lint). The TPU case I got from ebay has been great - glossy yet grippy. Adds about a mm top & bottom.
Click to expand...
Click to collapse
I just ordered one of these today, sounds like a good one.
Amzer argyle for $4
Sent from my GT-I9000 using XDA App
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290487171195&ssPageName=STRK:MEWNX:IT
I just ordered this case - its the slimmest/nicest looking imho, I am currently using the otterbox defender case - which i like, its a bit on the bulky side, but does offer excellent protection - my only real complaint with it is that its a pain to get the the battery if needed - have to take the rubber off, then separate the case and remove the phone from it to gain access to the back cover...
jgc121 said:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290487171195&ssPageName=STRK:MEWNX:IT
I just ordered this case - its the slimmest/nicest looking imho, I am currently using the otterbox defender case - which i like, its a bit on the bulky side, but does offer excellent protection - my only real complaint with it is that its a pain to get the the battery if needed - have to take the rubber off, then separate the case and remove the phone from it to gain access to the back cover...
Click to expand...
Click to collapse
Looks just like a TPU case which if you don't mind having a not as fancy case you can get the Amzer one on amazon for $5 shipped and the knockoff ones on ebay for about $3-4 shipped. But the case you linked to is one very nice looking case.
All nice looking cases. I may have to try the TPU out. Looks nice.
Sent from my SAMSUNG-SGH-I897 using XDA App
bay_wolf said:
http://www.amazon.com/gp/product/B003VQS43U/ref=oss_product
Cheap, looks good (can't really see the pattern except at a certain angle), protects great, and is the thinnest protective case I've seen.
Click to expand...
Click to collapse
+1
That Amzer case does it's job very well. It protects, looks good, thin and is subtle in a good way. The fact that it is now ~$6.00 makes it an absolute steal. I usually don't buy cheap stuff for my phone (or for anything for that matter) but this case performs like a $20 case.
Only issue I have with it is that mine seem to be less snug than it was when I first got it. I only take off my case when I have to do a battery pull so it's a bit surprising that it got loose so easily. I recently bought a Otterbox Commuter to replace this case because I was getting bored with it but I wouldn't say I changed because it was necessary; it was just cause I was bored and I found a good deal for it.
+1 for the xmatrix case. It's a hard case but very slim and is a good fit without any movement or shuffling. Plus, there is a minor lip on the front so you can rest it face down.
It snaps on in the back...just one piece.
Body glove for sure best slim streamline case
Sent from Serendipity 5.3 Captivate via XDA app
http://www.ebay.com/itm/TPU-Cases-S...s=63&clkid=5450595014366325529#ht_2001wt_1139
i think this is the best tpu case i have ever gotten for any of my phones.
TPU cases usually cover the buttons and make it very difficult to press buttons, or may be slightly too big for the phone so its not a snug fit.
This case that i got for the phone fits it perfectly, no loose sides, its tight just like how a condom should be
PROS, buttons are cut out, and its matte, great feel, fits perfectly
CONS, 10 bucks for a tpu case?? >:[ being that usually they're $2-5!
buy it! im happy with the case check it out!
I second this; it's a nice case (I don't have any experience with other cases, though). I got it from Amazon.com for around $6.
I will also second that, great case, I also have the trident aegis which is great when I am at work, other wise I change to this case when I am at home.
yep...great case still one of my favorites
Agree! this case is amazing. I also have the D30 from T-mobile store. Both are very good. But the D30 offers more protection.
I have this case as well. I got it on amazon for $11
Fits very well, all buttons are easily accessible. I also bought an Xtremeguard screen protector (screen, back, and 4 sides) but with this case the back and sides are superfluous. Smarter shopping and you could probably get a screenprotector + this TPU case for about $12 and get great protection for your phone.
i agree, this is the best tpu case ive ever owned or used. its cut outs for the buttons make it feel like the case isnt even there and its super thin and fits great. i got mine for 11 on amazon but i got the smoked clear one. here is some pics if it helps anyone out. just make sure u get the Revision 2 one. because i guess the first cases they made blocked the mic at the bottom. u can see in my pics that mine isnt blocked because its the Revision 2 version which they fixed that issue
Save a couple of bucks:
http://forum.xda-developers.com/showthread.php?t=1385705&highlight=tpu
vw671 said:
Save a couple of bucks:
http://forum.xda-developers.com/showthread.php?t=1385705&highlight=tpu
Click to expand...
Click to collapse
it's glossy though. me no like gloss
androidtoy09 said:
it's glossy though. me no like gloss
Click to expand...
Click to collapse
lol same here. mine isnt glossy, which is why i like it. plus the gloss makes the phone feel slippery in the hand lol
s10shane said:
lol same here. mine isnt glossy, which is why i like it. plus the gloss makes the phone feel slippery in the hand lol
Click to expand...
Click to collapse
It's actually not slippery at all. There is a bit of tacky-ness to it from the TPU material.
Just got this last week from Amazon and it's amazing. Definitely the best one hands down.
I'm looking for a pretty thin case that will just give me a better grip on the phone and still keep the slim form factor. Liike a rubberized coating, not gel type that attracts dust and lint.
The depth the edges of the case add to the screen has to be minimal too if you know what I mean. The only case that I have in mind right now is the seido surface case.
Incipio Feather all the way. Not sure where you are located, but if there is a US Cellular store in your area, they carry them in stock for their GS2 (which is the same as ours). It is about as minimal as you can get, and it looks amazing on the phone.
You could also go standard TPU, but I like the Feather a lot better.
I have this one
http://www.amazon.com/Diztronic-Fle...UTW6/ref=sr_1_1?ie=UTF8&qid=1336082892&sr=8-1
and I love it..
steindog99 said:
Incipio Feather all the way. Not sure where you are located, but if there is a US Cellular store in your area, they carry them in stock for their GS2 (which is the same as ours). It is about as minimal as you can get, and it looks amazing on the phone.
Click to expand...
Click to collapse
Another vote for the Feather here. Nice grippy feel, still easily removed from pocket, minimal bulk added to phone. Can lay the phone flat on its face without fear of any screen damage, or face up without the camera lens touching the surface. perfect fit. I got the grey case and it looks great.
I've picked up one of these....amazing! Feels great on your hand..
http://www.amazon.com/gp/product/B0...=1789&creative=390957&creativeASIN=B005PZ6HP2
arrows83 said:
I've picked up one of these....amazing! Feels great on your hand..
http://www.amazon.com/gp/product/B0...=1789&creative=390957&creativeASIN=B005PZ6HP2
Click to expand...
Click to collapse
I have the red one. It looks absolutely sexy with my white e4gt and it adds less bulk than the sline tpu case.
Sent from my SPH-D710 using Tapatalk 2
This is as minimalistic as it gets.
http://mobilemate.yetaa.com/samsung/nillkin-samsung-epic-4g-touch-d710-protective-case.html
pics of mine:
http://forum.xda-developers.com/showpost.php?p=23896317&postcount=23
I have a blue incipio feather case. This thing is awesome!
Incipio feather, you can remove the back and just use the case.
Mine has survived several drops.
Sent from my SPH-D710 using xda premium
I bought this: http://www.ebay.com/itm/330692783485
Got it today. Fits perfectly and I barely notice it's there. The grippy sides are wonderful.
Other than taking ~2 weeks to arrive, it is wonderful, and I can't complain about the long shipping time when it was $1.99 including shipping.
I have the blue one its awesome
Sent from my Unnamed 2.0.1 EL29 powered Galaxy S2 brought to you by Sprint
osva said:
I have this one
http://www.amazon.com/Diztronic-Fle...UTW6/ref=sr_1_1?ie=UTF8&qid=1336082892&sr=8-1
and I love it..
Click to expand...
Click to collapse
I have the same one!
Highly recommended
Anyone have the BodyGlove case?
Im picking up the Incipio Feather right now!
Atillius said:
Anyone have the BodyGlove case?
Click to expand...
Click to collapse
I do. It's thin, but definitely not what I would consider minimalistic case as it's thicker and has a bit of weight to it. The kickstand causes the thickness but is by far one of the most useful things I've used for an accessory.
So after seeing pictures of it for a while and finally seeing peoples reviews for the case i finally bought the infinity white case. I already had a couple of ebay cases while i was waiting to get something a little more "premium" so i pulled the trigger on the Neo Hybrid. I received it today and have to say it is not what i expected.I already knew about the buttons being too sensitive and the case being more purple than blue so no surprises there, but being advertised as a tpu case i thought this would fit the phone much more tightly the way every tpu case ive ever bought off of ebay for $2 has felt. the tpu portion of the case was either made too large or from a different kind of material because it feels loose on the phone to me. the bumper that goes around the case is meant to keep the tpu tight to the phone, and perhaps add another layer of protection but it tpu along the front of the screen feels very loose and is even a bit sharp to the touch because of its square shape. this is the case i had been using for the past month and i loved the feel, but not so much the look of it. I actually couldnt decide which color i wanted and bought the orange one as well a couple of days ago and it looks like ill be sending them both back in favor of my $4 ebay case.
http://www.ebay.com/itm/Black-PC-TP...670415?pt=PDA_Accessories&hash=item1e6f7fe08f
Just a quick question, did you get the Neo Hybrid Lumi or the Color?
it was the color series with the purple/blue case and white bumper frame, now i have an orange lumi on order and i can only assume it is going to have the same feel to it. way more bummed about how loose the case feels and the way the rim around the screen is really jagged feeling and not rounded at all.
I've got an orange Lumi coming in today, I'll post anything if it disappoints. They looks so damn good in the pictures, especially with the white GS3. I just had to pull the trigger
King Shady said:
I've got an orange Lumi coming in today, I'll post anything if it disappoints. They looks so damn good in the pictures, especially with the white GS3. I just had to pull the trigger
Click to expand...
Click to collapse
the case looks nice but be ready not to use it or modify it so the buttons work. I already emailed them and sent pics in. The little bumpers are way to high so it causes the sensitivity to go through the roof
I don't have one yet but I am very disappointed in the colour selection. How can you not have a black/black like all the others before it? The old ones never sagged on me so I personally want a black/black with the good old silicon and polycarbonate frame.
Don't see it happening though.
SGP products suck in terms of "fit", I had an ultra thin air for my SII, the worst case ever, since then I decided not to purchase sgp again.
Case Mate for the win!!! Very recommended!!! Great quality and fit!!!
Sent from my GT-I9300 using XDA Premium HD app
misha25 said:
the case looks nice but be ready not to use it or modify it so the buttons work. I already emailed them and sent pics in. The little bumpers are way to high so it causes the sensitivity to go through the roof
Click to expand...
Click to collapse
I emailed them about the button issue too. They seem to know about it and said I'm getting an updated version of the Color in mid-August.
lsv-1 said:
SGP products suck in terms of "fit", I had an ultra thin air for my SII, the worst case ever, since then I decided not to purchase sgp again.
Case Mate for the win!!! Very recommended!!! Great quality and fit!!!
Sent from my GT-I9300 using XDA Premium HD app
Click to expand...
Click to collapse
I ordered their leather pouch because I seriously loved their screen protectors. The pouch was so tight I had to use a razor blade to cut the seams to remove my phone. The pull tab broke off as I was trying to remove my phone with it.
i think theres something to be said for mass producing cases. all the generic ebay tpu cases seem to fit perfect, havent had an issue yet. they all fit nice and snug, cutouts are perfect, the buttons arent as tactile and clicky as more expensive cases but theyre still easy to press
I agree with the OP, I got the neo hybrid lumi in green and I think that this case just feels cheaply made, this is definitely not worth paying $26. My cheap tpu case I got off eBay for 3 bucks is 100 times better than this. The camera cut off holes for this aren't even properly aligned and the case does not fit the phone very well. And also with the issue with the buttons. I highly suggest that no one should buy this case. It's a terrible case and cheaply made and over priced. I'm disappointed with the way this case turned out. I put a bad review on SGPs website to warn other buyers but they would not even post my review. Screw you SGP lol
Sent from my SGH-T999 using xda app-developers app
Was waiting for a review like this... really unsure if to order it.
How bulky is it in comparison to the Incipio Sillicrylic? I can't decide between the two.
Yonatanl2 said:
Was waiting for a review like this... really unsure if to order it.
How bulky is it in comparison to the Incipio Sillicrylic? I can't decide between the two.
Click to expand...
Click to collapse
I highly suggest you go with the incipio case. The Sgp case is not worth it.
Sent from my SGH-T999 using xda app-developers app
Hey Angie have you had any other cases for your gs3? If you notice while the case is on the phone the bit that runs around the edge of the screen can be moved very easily. The band is what makes the case stick to the phone and difficult to take off. My dislike is with the actual tpu case. Which is much more flimsy and soft than most tpu cases
no the band is the only thing that fits the phone well, im referring to the bit on tpu that sticks out past the band around the edge of the front glass, if you nudge it at all its very lose and also is very angular and uncomfortable to touch
angie4u said:
that is so weird because i have no issues with the cameras and holes not aligning with the cutouts, as you can see from the pictures. And the fit is very snug. This is my first SGP case purchase so did I just get lucky? I haven't use the Incipio so I cant compare the two but in terms of bulkiness, I don't find this to be bulky at all. it's very thin and sleek. However, if you are looking for something that's very durable, this might not be the case for you.
Click to expand...
Click to collapse
Yeah I think you did get lucky, because the cut out on mine was not even centered like how it is with yours. The holes on mine came down more to where the camera, lights and speakers are. And in the front, the top part of the tpu covered the silver bezel but hardly covered the bottom part. Close enough to where it looks like the tpu was sagging. I was so pissed that I literally wanted to cover the case in gasoline and burn it for how ****ty, it was lol. I honestly think that the feel of the case just feels so cheap. I have a few other tpu cases I purchased on eBay at a much cheaper price that felt more of a high quality than that piece of crap that sgp made lol. But alas, I returned it back to sgp with an e-mail stating that they did a piss poor job with the case lol.
Sent from my SGH-T999 using xda app-developers app
I guess I'm another of the lucky ones. My cutouts fit perfect, and I have no issues (besides the whole oversensitive buttons issue) but I can relate to the whole "looseness" thing.
As far as TPU cases go, the NeoHyb is definitely not cut to be "tight-fitting" like the some of the other TPU cases I've seen. Without the band, the TPU base IS loose fitting.
With the plastic band though, the entire assembly is tight enough that any attempts to pull it off usually takes the battery cover along with it.
Also, the TPU is more pliable and softer then most other TPU cases I've seen, which makes the "loose" feeling even worse, but I take it it's made that way for better impact absorption.
It's definitely not soft and stretchy like silicone though, which I hate.
So, is the NeoHybrid a perfect case? No. The plastic band is too thin, too slippery. The TPU back is not rough enough. The buttons don't really work without modifications. The TPU rim around the screen, as the OP said, feels "sharp" enough out of the box to be slightly uncomfortable.
Yet, for some God forsaken reason, I like the bloody bugger and I think 20 odd dollars is a fair price for it - considering I've dropped the phone a couple of times already and the case has been doing what it's paid for with aplomb.
YMMV though.
I DO have the Incipio Faxion - another TPU/Polycarb hybrid case I've seen out there - on order though, and plan to do a comparo as soon as it arrives.
Considering I got both at around the same price, it should be an interesting comparison.
I think people are being unreasonable here. This case isn't supposed to be as hard as other TPU cases. That is why there is a polycarbonate hard frame. The whole design philosophy of the Neohybrid is super soft inside with hard shell structural support. I am glad they went for the silicon feel.
The capdase soft jacket feels basically like silicon for anyone going for that type of case. The modello is quite hard by the way. Almost as rigid as a hard snap on shell.
Tomatoes8 said:
I think people are being unreasonable here. This case isn't supposed to be as hard as other TPU cases. That is why there is a polycarbonate hard frame. The whole design philosophy of the Neohybrid is super soft inside with hard shell structural support. I am glad they went for the silicon feel.
The capdase soft jacket feels basically like silicon for anyone going for that type of case. The modello is quite hard by the way. Almost as rigid as a hard snap on shell.
Click to expand...
Click to collapse
Doesn't feel super soft to me.
Sent from my SGH-T999 using xda app-developers app
angie4u said:
did you check if the reseller was selling genuine SGP product? because i almost got a GLAS.t screen protector from a site that was selling it like.. $8 cheaper than SGP but I wasn't sure so I emailed them.. they told me they were fake. maybe it was poorer quality because it was imitation.. but it boggles my mind why anyone would want to imitate $30 items...
Click to expand...
Click to collapse
I ordered it straight from SGP when they were doing the pre orders. So I'm pretty sure it's genuine unless they're lying and are just making some fake products. They gave me my money back though so it's all good. I'm pretty sure those cheap imitations probably turned out better than their genuine product lol.
Sent from my SGH-T999 using xda app-developers app