Develop Bugs

[Q] ROM install faillure

When i install a ROM they install but when i reboot my phone nothing happens some app icons change but that's it Please help
see page 2
Rooted Epic 4g EC05 Stock rom

You have to provide more information so we can help you out. What ROM are you installing? What is your current recovery? Are you using the purp 3.1.0.1? Did you wipe System/data, cache partition, and Dalvik Cache 3x? We can get you straightened out. Just give some more details.
Sent from my SPH-D700 using XDA Premium App

all ROM's do it but im trying to convert over to ext4 and run syndicate ROM . Yes i have wiped data/factory restore and flushed dalvik 3x every time... cwm recovery v2.5.1.0

you cant install srf 1.2 on that recovery.. you need to upgrade to 3.1.0.1, cwm2x does not support ext4

You need to update clockwork to 3.1.0.1. You're using an outdated recovery.
http://forum.xda-developers.com/showthread.php?t=1115999

oh .... how do i update i tried to flash with ROM manager but it obviously didn't work

samsungepic4g said:
oh .... how do i update i tried to flash with ROM manager but it obviously didn't work
Click to expand...
Click to collapse
The link above ur post has a flashed zip.
Sent from my SPH-D700 using XDA Premium App

samsungepic4g said:
oh .... how do i update i tried to flash with ROM manager but it obviously didn't work
Click to expand...
Click to collapse
Rom manager doesn't really work for epic. You have to turn off your phone and then hold camera, vol down and power to get into your recovery. Check qbking's videos. They will make a lot of sense. You may want to odin your phone and restart. I'm not sure how much craziness you may have started. Backup major stuff with Titanium and everything will pretty much be normal without major loss.

Wow, its been a while since I was that far back on recovery. Let me check TheRoot's link...EDIT..yup TheRoot's link has a flashable version of the 3.1.0.1 recovery that will get you right where you want to be to flash all of the current batch of ROMs. PM me if you get stuck and I will go step by step
Sent from my SPH-D700 using XDA Premium App

After you finish, download ACS updater and it'll give you the goodness you were looking for in Rom Manager. There's also a support thread in Apps.

hey tanks to every 1 who helped i flashed my epic to cwm recovery 3.1.0.1 purple now its going to be a pain in the but to convert to ext4

samsungepic4g said:
hey tanks to every 1 who helped i flashed my epic to cwm recovery 3.1.0.1 purple now its going to be a pain in the but to convert to ext4
Click to expand...
Click to collapse
If you're flashing SRF 1.2, don't worry. It's built in. Just flash the rom, journaling on and a kernel and you're on your way. Use the thanks button as well, please.

Ok im running sfr on my epic looks amazing and ext4 and set cpu 1200mhz combined is amazingly fast thanks to all
Sent from my SPH-D700 using XDA App

[ROM] development stopped Msginger 2.3.4

USE AT YOUR OWN RISK, I AM NOT RESPONSIBLE IF YOU DO SOMETHING TO YOUR PHONE.
GINGERBREAD MOTOBLUR​
Modded Defy leaked 2.3.4 gingerbread motoblur rom
I AM NOT RESPONSIBLE FOR YOUR PHONE IF YOU USE THIS, IT WILL BE AT YOUR OWN RISK
All working except for stock camera and camcorder. You must use included appshot for photos and download video illusion from market if you want to record videos
I REPEAT, STOCK CAMERA AND CAMCORDER NOT WORKING.
Made some small Build prop tweaks and partially fixed camera/camcorder
INSTRUCTIONS FOR FIRST INSTALL​
DO NOT LEAVE RECOVERY MENU UNTIL YOU ARE COMPLETELY DONE WITH INSTALL
download and place on sdcard/clockwork/backup folder
reboot into recovery menu
format data in recovery
wipe Dalvik in advanced menu of recovery
wipe Cache in recovery
choose restore zip and click to install ROM
reboot and give it some time for first boot
signal problems then use signal wifi download and install in recovery
IF ANY PROBLEMS BOOTING THEN GO BACK TO RECOVERY AND WIPE DATA, CACHE, AND DALVICK THEN REBOOT
INSTRUCTIONS FOR UPDATE INSTALL​
DO NOT LEAVE RECOVERY MENU UNTIL YOU ARE COMPLETELY DONE WITH INSTALL
download and place on sdcard
reboot into recovery menu
wipe Dalvik in advanced menu of recovery
wipe Cache in recovery
choose update zip and install rdannarV5
reboot and give it some time for first boot to build cache
signal problems... then use signal wifi download and install in recovery
IF ANY PROBLEMS BOOTING THEN GO BACK TO RECOVERY AND WIPE DATA, CACHE, AND DALVICK THEN REBOOT
I use 2nd init for defy in the market.
Thanks to Walter and maker of dualdefy rom, jorognv without him figuring out porting would be much harder, bandroidx and his apps, and all developers of Bravo and Defy Roms that I may have spliced or used files for reference.
Download
Leaked gingerbread motoblur rom 2.3.4
http://hotfile.com/dl/127894666/ab0eb90/gingerblur.zip.html
wifi and signal fix
SIGNAL FIX
install Walter's apps and framework (not rom)
THIS IS AN UPDATE NOT A ROM
update_september_6th
put wallpapers in any folder on sdcard and use gallery when setting wallpapers (this is bravo wallpapers)
http://hotfile.com/dl/126359321/c8955b2/wallpapers.rar.html​

Edit. Got everything but camera working overclock available in settings menu... took a few pieces of all the gingerbread roms and put them into one... gonna test for a few days and get out bugs...
Sent from my MB525 using XDA App

can you get a port of the leaked defy gingerbread?

marquae11 said:
can you get a port of the leaked defy gingerbread?
Click to expand...
Click to collapse
That's what this rom is
Cheers
Sent from my MB525 using XDA App

the camera is partially working? what do you mean?

marquae11 said:
the camera is partially working? what do you mean?
Click to expand...
Click to collapse
The preview screen works and it acts likes it takes a pic but it saves a blank image...
Sent from my MB520 using XDA App

Got dubug working so 3rd party app app will take pic and videos
Sent from my MB520 using XDA App

Does that mean we might get a camera port for miui or maybe cm7?
Sent from my MB525 using XDA App

Sounds good. GB for Bravo. Could you maybe release a update.zip with modificated files. A new MS2Ginger port is planed based on latest Milestone 2 GB. (4.5.3-77)
MS2GingerRC1 has better Language support. (yesterday released)

Plan on using a lot of fixes that your Rom has. Had to use a different base rom with better matching init and kernel files.
@ Walter but it es your rom and pm that got me to work with Ginger blur
As far as miui and cm7... we will see if I have enough time. I kind of like Ginger blur better
Sent from my MB520 using XDA App

So when are you uploading all these files?

They are.to big.for.phone upload so have to find time to go to hotspots .
marquae11 said:
So when are you uploading all these files?
Click to expand...
Click to collapse
Sent from my MB520 using XDA App

ok I look forward to using your roms

http://hotfile.com/dl/127894666/ab0eb90/gingerblur.zip.html
USE AT YOUR OWN RISK, I AM NOT RESPONSIBLE IF YOU DO SOMETHING TO YOUR PHONE.
unzip and put folder in clockwork mod backup folder then restore in recovery
use action shot for pictures (installed0)
use video illusion from market for videos
contacts has some errors so if you need to edit them then long press and pick contact editor that I added
added filemanger from atrix
do not use recovery for overclock, use advanced menu in settings instead.
thanks to defy dualrom developer and walter from defy.

rdannar, is it possible to move the camera from Msginger in CM7?
sorry for my English

Not sure... will see if i can find time to check it out
Right know i am working on installing blur roms with update zip.. so i can port my favorite rom....
Superaosp
Visual_Serg said:
rdannar, is it possible to move the camera from Msginger in CM7?
sorry for my English
Click to expand...
Click to collapse
Sent from my MB520 using XDA App

Got half of a rom install done... it bootloops.. but it makes it through recovery menu so i don't have to sbf afterwards... sbf takes a lot longer than restore my system.
Sent from my MB520 using XDA App

Rdannar, is the nandroid safe or should I wait for an update.zip

Try stock camera.apk from greenbreadmod in defy section. link to greenbread can find on first page of MS2Ginger thread.
Could you give more information about the camera problem.

Thanks. Camera didn't make a difference.. tried several of them. There is a error in libsojordan.sh.
walter79 said:
Try stock camera.apk from greenbreadmod in defy section. link to greenbread can find on first page of MS2Ginger thread.
Could you give more information about the camera problem.
Click to expand...
Click to collapse
Sent from my MB520 using XDA App

[Q] new rom/kernel

Hey guys, I just rooted my phone a few hours ago from the tutorial here on this site for my android 2.3.3 hboot 2.16....well i finally got to root it and got really excited. THe main 2 reasons i rooted were for wifi tethering and terrible battery life. Bought an extended battery before but didnt help much.
Anyway i think i flashed it lol with superuser? ( i backed up files with rom manager and myrombackup) I just downloaded set cpu with the following settings
enabled check notifications check
screen off priority 100 245 max 245 min performance
charging full priority 50 998 max 245 min ondemand
battery<75 priority 50 806 max 245 min ondemand
So my question is, are these good settings? how much better do you think my battery life will be with these settings?
oh and do roms and kernels come in like the same zip file? where i flash them together? and which do you guys think is best for battery life, but similar to the evo stock rom? i dont wanna change my phone too much, i like it, just didnt like the battery life...sorry if this question is redundant, but most of the threads i found were really old so i didnt wanna put in an old rom or kernel if i dont have to.... THANK u guys so much before hand.

If you want to stay stock there are a few roms in the development forum that are stock with bloat removed and minimal mods. You might check some of those out.
One example is: http://forum.xda-developers.com/showthread.php?t=1249615
The next step would be a ROM that is ported to the Evo but with a stock look. I am running MikG which I think is one of the best.
A ROM will always come with a kernel that will be flashed with it. You can always flash a different kernel over it later. Freedom is a good kernel (see my sig for a link).
Sent from my PC36100

If your looking for a stock rooted ROM with good battery life you might want to try a froyo ROM with an sbc kernel you will get almost 2 times more out of your battery and its the same old sense 1.0 so you won't even notice a difference.
Sent from my PC36100 using XDA App

m20120 said:
If you want to stay stock there are a few roms in the development forum that are stock with bloat removed and minimal mods. You might check some of those out.
One example is: http://forum.xda-developers.com/showthread.php?t=1249615
The next step would be a ROM that is ported to the Evo but with a stock look. I am running MikG which I think is one of the best.
A ROM will always come with a kernel that will be flashed with it. You can always flash a different kernel over it later. Freedom is a good kernel (see my sig for a link).
Sent from my PC36100
Click to expand...
Click to collapse
thanks a lot! but umm how is the battery life on MikG? and what does bloating mean and how do i remove them? lol sorry if i sound like a newbie :/ and ohh- one question on roms, can i keep this rom forever lol, or will it end up not working one day and ill have to update to another one???

omg3 said:
thanks a lot! but umm how is the battery life on MikG? and what does bloating mean and how do i remove them? lol sorry if i sound like a newbie :/ and ohh- one question on roms, can i keep this rom forever lol, or will it end up not working one day and ill have to update to another one???
Click to expand...
Click to collapse
Battery is OK like any gb ROM and bloat is what we call any apps that come from our carrier that you don't want or need on the ROM like stocks ,nova , sprint TV etc..
Edit: you can remove apps "bloat" with any app that will let you like titanium backup I use antek app its free on the market.
Sent from my PC36100 using XDA App

linsalata28 said:
If your looking for a stock rooted ROM with good battery life you might want to try a froyo ROM with an sbc kernel you will get almost 2 times more out of your battery and its the same old sense 1.0 so you won't even notice a difference.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Thanks, again im sorry if i sound like such a newbie- but the evo comes with sense 1.0? i thought it was something more updated then that lol- and 2x better is a lot better! but um same question, will these roms just up and stop working one day even if i never update the sprint update? or will i be able to keep it if im happy?

omg3 said:
Thanks, again im sorry if i sound like such a newbie- but the evo comes with sense 1.0? i thought it was something more updated then that lol- and 2x better is a lot better! but um same question, will these roms just up and stop working one day even if i never update the sprint update? or will i be able to keep it if im happy?
Click to expand...
Click to collapse
Yeah the evo got stuck with sense 1.0 even with the gb update .
If what ever ROM you flash works for you you can keep it forever if you like you will need to try out a few ROMs they all work different on each evo there are a few different types if evos .
What might work good for me might not for you.
Sent from my PC36100 using XDA App

Here is a link to a very nice froyo ROM that runs nice and you can flash an sbc kernel for better battery.
http://forum.xda-developers.com/showthread.php?t=793471
Sent from my PC36100 using XDA App

linsalata28 said:
Yeah the evo got stuck with sense 1.0 even with the gb update .
If what ever ROM you flash works for you you can keep it forever if you like you will need to try out a few ROMs they all work different on each evo there are a few different types if evos .
What might work good for me might not for you.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
ohhh makes sense now thank u! should i just get the rom i want from this site?
and just to recap, i wipe/factory reset the phone from the loading screen, then backup? even if i already backed up?? and then flash the phone with the new rom and kernel?
Edit: just read ur last post thanks!

omg3 said:
ohhh makes sense now thank u! should i just get the rom i want from this site?
and just to recap, i wipe/factory reset the phone from the loading screen, then backup? even if i already backed up?? and then flash the phone with the new rom and kernel?
Click to expand...
Click to collapse
What recovery are you using ?
I recommend amon ra 2.3 if your not already .
If you already backed up your ROM from recovery "nandroid backup" then you don't need to do it again its just in case something goes wrong so you can go back to it.
Yes download the ROM from here and the kernel then wipe everything except your sd card and battery stats "you can wipe your battery stats if your battery is at a 100%" then flash the ROM and then the kernel.
If you get any fc's after first boot fix permissions if that doesn't work go back into recovery and wipe cache and dalvik cache and reboot that will fix most problems.
Hope that helps you out.
Sent from my PC36100 using XDA App

linsalata28 said:
What recovery are you using ?
I recommend amon ra 2.3 if your not already .
If you already backed up your ROM from recovery "nandroid backup" then you don't need to do it again its just in case something goes wrong so you can go back to it.
Yes download the ROM from here and the kernel then wipe everything except your sd card and battery stats "you can wipe your battery stats if your battery is at a 100%" then flash the ROM and then the kernel.
If you get any fc's after first boot fix permissions if that doesn't work go back into recovery and wipe cache and dalvik cache and reboot that will fix most problems.
Hope that helps you out.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
wow, you're super helpful
i actually used the superuser backup- from this thread- http://forum.xda-developers.com/showthread.php?t=1218386
what's the difference between that and amon ra 2.3?
also i did a backup from the recovery and also from rommanager.
and finally, lets say i get the rom you told me about, http://forum.xda-developers.com/showthread.php?t=793471 - (warm twopoint) it says on that thread,
As this ROM now uses the latest official HTC Kernel (#15) you MUST update your Radio/Wimax. I recommend Calkulin's combo update which is available here or via direct download here.
Installation Instructions:
Download Rom and Radio/Wimax updates and place in the root of SDCard.[/B]
umm does the kernel come in the same file as the rom that i download? and where do I get the radio/wimax updates and what do I do with them? do i flash them too and when?
(should I get a separate kernel for better battery life? some people commented that the battery life wasn't great with this rom, so should i use a different kernel?)

omg3 said:
wow, you're super helpful
i actually used the superuser backup- from this thread- http://forum.xda-developers.com/showthread.php?t=1218386
what's the difference between that and amon ra 2.3?
also i did a backup from the recovery and also from rommanager.
and finally, lets say i get the rom you told me about, http://forum.xda-developers.com/showthread.php?t=793471 - (warm twopoint) it says on that thread,
As this ROM now uses the latest official HTC Kernel (#15) you MUST update your Radio/Wimax. I recommend Calkulin's combo update which is available here or via direct download here.
Installation Instructions:
Download Rom and Radio/Wimax updates and place in the root of SDCard.[/B]
umm does the kernel come in the same file as the rom that i download? and where do I get the radio/wimax updates and what do I do with them? do i flash them too and when?
(should I get a separate kernel for better battery life? some people commented that the battery life wasn't great with this rom, so should i use a different kernel?)
Click to expand...
Click to collapse
Superuser is an app the let you allow root to apps that need it.
You want to make a backup from recovery its called a nandroid backup I think you have clock work mod recovery you might want to switch to amon ra 2.3 you can get the link from my sig.
When you make a backup make sure to backup your wimax keys I think cwm does it on its own in ra2.3 you can pick and choose what you want to backup.
I'm not sure what radios your on but you should be good if you had 2.3 on your phone when you rooted it.
The ROM comes with a kernel but its the stock kernel give me a minute and I'll post a link to the ones that work with it.
Sent from my PC36100 using XDA App

Here are some kernels that work with any 2.2 ROM I use 4.3.4 sbc cfs havs more.
http://forum.xda-developers.com/showthread.php?t=719763
Here is a guide to understand the different kernels.
http://forum.xda-developers.com/showthread.php?t=894880
Sent from my PC36100 using XDA App

linsalata28 said:
Superuser is an app the let you allow root to apps that need it.
You want to make a backup from recovery its called a nandroid backup I think you have clock work mod recovery you might want to switch to amon ra 2.3 you can get the link from my sig.
When you make a backup make sure to backup your wimax keys I think cwm does it on its own in ra2.3 you can pick and choose what you want to backup.
I'm not sure what radios your on but you should be good if you had 2.3 on your phone when you rooted it.
The ROM comes with a kernel but its the stock kernel give me a minute and I'll post a link to the ones that work with it.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
ok, so im putting the PC36IMG.zip to my sd card, then putting phone into recovery, then putting install zip from sd card, and clicking on that PC36IMG...sound right?

omg3 said:
ok, so im putting the PC36IMG.zip to my sd card, then putting phone into recovery, then putting install zip from sd card, and clicking on that PC36IMG...sound right?
Click to expand...
Click to collapse
For the recovery zip make sure its on the root of your sd not in any folder then boot to your bootloader not recovery you can download an app called quick boot to do that or just turn your phone off then hold down volume and power when it comes to the bootloader it will automatically scan for the update just hit volume up to except it then you can reboot the phone or go to recovery.
Sent from my PC36100 using XDA App

You could download ROM Manager from the market and it has the option to flash ra2.3 in the app .
Sent from my PC36100 using XDA App

linsalata28 said:
You could download ROM Manager from the market and it has the option to flash ra2.3 in the app .
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
So if I use rom manager I dont have to go to the bootloader screen? or do i have to do both? I already went to rom manager premium, then used alternate flash and now it says current recovery RA recovery v2.3 and latest recovery Clockworkmod 5.0.2.2....
Do i do a nandroid backup after setting up amona RA?

omg3 said:
So if I use rom manager I dont have to go to the bootloader screen? or do i have to do both? I already went to rom manager premium, then used alternate flash and now it says current recovery RA recovery v2.3 and latest recovery Clockworkmod 5.0.2.2....
Do i do a nandroid backup after setting up amona RA?
Click to expand...
Click to collapse
No you don't have to flash it then I just forgot about rm and flashing it that way I don't use rm anymore only to fix permission.
Now when you go to recovery to make a backup go under backup/restore/ nand backup and select what you want to backup leave the ones that are checked then check android secure ,sdext if your sd is partitioned , and wimax I believe thats all I backup .
You don't need to backup recovery or cache .
You should also make a backup of just your wimax keys that way if you lose them in a flash you can restore just that and not have to restore a whole backup.
Sent from my PC36100 using XDA App

linsalata28 said:
No you don't have to flash it then I just forgot about rm and flashing it that way I don't use rm anymore only to fix permission.
Now when you go to recovery to make a backup go under backup/restore/ nand backup and select what you want to backup leave the ones that are checked then check android secure ,sdext if your sd is partitioned , and wimax I believe thats all I backup .
You don't need to backup recovery or cache .
You should also make a backup of just your wimax keys that way if you lose them in a flash you can restore just that and not have to restore a whole backup.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Thank you so much! I did it both ways anyway lol, I'm currently doing a nandroid backup for everything, then doing it juts for wimax. THen ill copy them to my computer and flash drive just incase.
Ok, so i think i decided, I'm gonna get the [ROM] Myn’s Warm TwoPointTwo - [RLS 5 - 01/07/2011] - and for the kernel im gonna flash, 4.3.4-cfs-havs-more-sbc (More Aggressive HAVS) (can u make sure that's the one you have? and does it have at least 12 hours of moderate use? i text a lot, thats about it..)
ok now can you tell me if I have the steps right please?
- I'm going to download the rom Download Warm TwoPointTwo RLS 5 (Mirror 1) and paste it onto the root of my sd card.
- Then I'm going to download the kernel 4.3.4-cfs-havs-more-sbc (More Aggressive HAVS)- and paste it to the root of my sd card.
- Then, I use quick boot to go into recovery, then I wipe what I have to wipe/factory reset, then I flash the rom....
- THen I dont have to wipe again, and i just flash the kernel...THen, I can use myrombackup to get all my apps and the information in the apps back...
Should i use set cpu with this rom and kernel? and is thiss correct? lol- I'm really excited btw thank u sooo much---and oh the kernel i have on my phone right now is kernel version- 2.6.35.10...

omg3 said:
Thank you so much! I did it both ways anyway lol, I'm currently doing a nandroid backup for everything, then doing it juts for wimax. THen ill copy them to my computer and flash drive just incase.
Ok, so i think i decided, I'm gonna get the [ROM] Myn’s Warm TwoPointTwo - [RLS 5 - 01/07/2011] - and for the kernel im gonna flash, 4.3.4-cfs-havs-more-sbc (More Aggressive HAVS) (can u make sure that's the one you have? and does it have at least 12 hours of moderate use? i text a lot, thats about it..)
ok now can you tell me if I have the steps right please?
- I'm going to download the rom Download Warm TwoPointTwo RLS 5 (Mirror 1) and paste it onto the root of my sd card.
- Then I'm going to download the kernel 4.3.4-cfs-havs-more-sbc (More Aggressive HAVS)- and paste it to the root of my sd card.
- Then, I use quick boot to go into recovery, then I wipe what I have to wipe/factory reset, then I flash the rom....
- THen I dont have to wipe again, and i just flash the kernel...THen, I can use myrombackup to get all my apps and the information in the apps back...
Should i use set cpu with this rom and kernel? and is thiss correct? lol- I'm really excited btw thank u sooo much---and oh the kernel i have on my phone right now is kernel version- 2.6.35.10...
Click to expand...
Click to collapse
Use mybackup root to backup apps and data then use it to restore them.
Yes it sounds like you got it wipe everything except your sd card, battery stats and screen rotation I'll post a like to a super wipe I use that you can flash to make sure you wipe everything as well.
Then flash the ROM then the kernel then reboot.
If you get any force closes go back into recovery and wipe cache and dalvik cache then under other run fix uid package mismatch or what ever its called that will fix permissions from recovery.
http://www.4shared.com/file/p6mi6ogM/VR_SUPERWIPE.html
Flash this before you flash the ROM it will wipe everything for you do the wipes on your own as well.
After your all done you should download the app battery calibration and calibrate your battery to get more battery life it wipes you battery stats you can do it from recovery but you should just use the app it will tell you what to do.
Sent from my PC36100 using XDA App

Going from Blazer ICS Rom to AOKP ICS Rom

I have my rooted E4GT and the Blazer ICS Rom is installed on it at the moment. I kinda want to try and switch to AOKP's latest build and try it out, but I'm not sure how to go about doing that since they clearly stated not to flash from ICS to ICS.
Could anyone point me in the right direction as to what I should do in order to make the switch to AOKP?
Links to both ROM's respective threads:
AOKP Build 40
Phantom's Blazer Rom
Thanks for your time.

You can just Odin the el26 cwm (sorry don't have the link to it on my phone) and flash AOKP from there.
Sent from my SPH-D710 using xda app-developers app

This is my method, it is 99.9% safe. You can also re-use it to go from other ROMs to any other ics ROM.
Download these drivers
Download this: OC ODIN File for EL26 and this: E4GT Root Utility
Using Titanium Backup, make a backup of all your stuff, or use your preferred back-upper, just not nandroid. I recommend buying the Pro version, because it will save you so many times, and the dev is great. It's a little expensive though for an app.
OC Odin back to EL26. The good thing about this is, the process is straight forward, and doesn't add to your flash counter, and does not yellow triangle either.
Open up e4gtauto-sfx.exe, option C, then I. This gives you CWM, And just in case, I do not recommend using other than standard CWM to flash ICS roms. but that's me.
When your phone reboots, it should have CWM, and be rooted, just load up the AOKP files, do a data wipe, and flash.

Thank you both for the replies
Would I be able to use calkulins format all to do the wipes? Or does that only work for certain ROMS? It seemed pretty fool proof when I used it, so I was wondering if I could just use that again and it would work just the same? I don't want to forget something and brick my phone as a result
And I'll look into titanium backup, thanks for the suggestion.
Sent from my SPH-D710 using xda app-developers app

organizedConfoosion said:
Thank you both for the replies
Would I be able to use calkulins format all to do the wipes? Or does that only work for certain ROMS? It seemed pretty fool proof when I used it, so I was wondering if I could just use that again and it would work just the same? I don't want to forget something and brick my phone as a result
And I'll look into titanium backup, thanks for the suggestion.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
For ICS ROMs, I recommend to not use it, just do 1 system data wipe and you'll be fine.

F3L1XZS said:
For ICS ROMs, I recommend to not use it, just do 1 system data wipe and you'll be fine.
Click to expand...
Click to collapse
Alright, but all I should need to do is install the EL26 + CWM and I can flash AOKP? I don't need to go back to a stock gingerbread ROM or anything, or will the OC EL26 CWM do that for me?
And you said you don't recommend calkulin's format all for ICS roms, but that's what I was told to use for the Phantom Blazer ICS rom when I was flashing it?
Also, one more question; what is "flash count" and is it a bad thing? I'll do some googling on it myself, but I'd like to hear your explanation because I don't always understand people's ways of describing things and usually take weird explanations to understand so yours would still be much appreciated just in case, thanks. ^_^

organizedConfoosion said:
Alright, but all I should need to do is install the EL26 + CWM and I can flash AOKP? I don't need to go back to a stock gingerbread ROM or anything?
Click to expand...
Click to collapse
You just need to be on a safe recovery.... if you wipe data in an unconfirmed recovery you can cause a brick. Either use the el26 that all use or the el29-reboot kernel. Both will work no matter what you install regardless of you install (granted you flash a working rom). I prefer the el29 because you install via mobile Odin and it boots straight to safe CWM recovery.
Sent from my SPH-D710 using xda app-developers app

dante32278 said:
You just need to be on a safe recovery.... if you wipe data in an unconfirmed recovery you can cause a brick. Either use the el26 that all use or the el29-reboot kernel. Both will work no matter what you install regardless of you install (granted you flash a working rom). I prefer the el29 because you install via mobile Odin and it boots straight to safe CWM recovery.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Hmm, alright, sounds good.
Also, which data's do I need to wipe? Dalvik cache and there's one other I believe?

Camera not working

Camera only works when I install the stock EC05 rom through Odin.
Any other rom that I try to install through clockwork recovery makes the camera crash or at times open the app but shows a black screen along with the camera buttons.
I recall wiping something accidentally a while back in clockwork recovery mode but I wasn't sure what it was.
any help would be appreciated.

ssoblivion said:
Camera only works when I install the stock EC05 rom through Odin.
Any other rom that I try to install through clockwork recovery makes the camera crash or at times open the app but shows a black screen along with the camera buttons.
I recall wiping something accidentally a while back in clockwork recovery mode but I wasn't sure what it was.
any help would be appreciated.
Click to expand...
Click to collapse
Maybe its the camera itself...sounds like an upgrade is due?
Sent from my SPH-D700 using xda app-developers app

The camera is fine, I'm currently using EC05 because that's the only rom that it works with.
I'm almost sure it has something to do with how permissions are handled.
Only EC05 which was installed through odin lets the camera function fine.
But if I install any other rom through clockwork the camera crashes in every rom.

ssoblivion said:
The camera is fine, I'm currently using EC05 because that's the only rom that it works with.
I'm almost sure it has something to do with how permissions are handled.
Only EC05 which was installed through odin lets the camera function fine.
But if I install any other rom through clockwork the camera crashes in every rom.
Click to expand...
Click to collapse
re-odin and repartition.. and try fc09 rom stock
http://forum.xda-developers.com/showthread.php?t=1580931