Hello,
today i updated my phone from 2.3.5 to 2.3.6 using odin :S
but i discovered it doesn't support arabic language in writing and even reading its letters separately,
now i need to be back to my basic 2.3.5 or even i upgrade again to other version supporting arabic :S
can u help me please guys
thx
dr_tolba said:
Hello,
today i updated my phone from 2.3.5 to 2.3.6 using odin :S
but i discovered it doesn't support arabic language in writing and even reading its letters separately,
now i need to be back to my basic 2.3.5 or even i upgrade again to other version supporting arabic :S
can u help me please guys
thx
Click to expand...
Click to collapse
What firmware do you flash on? Is the firmware from your country? Because other region firmware does not support certain languages.
axilefoo said:
What firmware do you flash on? Is the firmware from your country? Because other region firmware does not support certain languages.
Click to expand...
Click to collapse
thx for reply and i knew after that it doesn't support arabic, so im in bad need for firmware supporting arabic, but idk where i can get it !!
or how i get my old firmware back
Did you google how to include arabic on 2.3.6?
nick.oh said:
Did you google how to include arabic on 2.3.6?
Click to expand...
Click to collapse
ty , i did but got nothing !!
i just need even 2.3.5 arabic version !!
can any1 tell me sites getting stock ROM of the phone ?
i think its not good to downgrade from 2.3.6 to 2.3.5 and could even brick your phone, be careful though
jayem123 said:
i think its not good to downgrade from 2.3.6 to 2.3.5 and could even brick your phone, be careful though
Click to expand...
Click to collapse
i did and worked good, thx for reply
may be U can go 2 www.SamMobile.com .u can search any stock rom that u need..
I have a clockworkmod backup ready, I don't really know if it supports Arabic (can't read all of the offered languages ).
But it's an EU stock ROM. Tell me if you need it.
Sent from my GT-S5360 using XDA App
you have to flash the firmware 235 please look at sammobile
Related
Hi !
I live in Bangkok, Thailand and have Note GT-N7100 unlocked.
Can I update manually with Odin the version of KitKat from France to use in Thailand or you would advice me to wait until the Thai version is here ?
Any difference ?
Await your kind answer and best regards to all,
Sammy
sammyservices said:
Hi !
I live in Bangkok, Thailand and have Note GT-N7100 unlocked.
Can I update manually with Odin the version of KitKat from France to use in Thailand or you would advice me to wait until the Thai version is here ?
Any difference ?
Await your kind answer and best regards to all,
Sammy
Click to expand...
Click to collapse
You can flash the France version while you wait till Thailand gets the official release.No harm.
Download it from https://mega.co.nz/#!2QRmCbyb!YkWs927BfvYxqL-vJiQHXkshqG3UtqHm4XIDbgLsEK0 ( NE1 France) instead of the slow speed of sammobile.It's zip file extract it you'll get the tar file.On odin select AP/PDA tab and choose this .tar file and flash.Good luck.
Hi , guys i updated my Note GT-N7100 from 4.3 to 4.4 N7100XXUFND4_N7100OJVFND3_PAK now that my wifi is working but mobile network is not working , it says emergency calls only
Need Help thanks
Only the thailand firmware version could work perfectly with your mobile sim
so i advice you to wait the kitkat update for your country to avoid this problem
microlynz said:
Only the thailand firmware version could work perfectly with your mobile sim
so i advice you to wait the kitkat update for your country to avoid this problem
Click to expand...
Click to collapse
That's not true , most of us who are running custom ROMs are running ROMS that are not based on our country's code,you dont expect a developer to make ROM for each country's stock firmware version. People here have flashed STOCK rom from other countries and using it without hiccups in their country ofcourse he can wait for the official firmware release for his country which no one knows when it would be released.
thankful to all of you !
My best regards.
Sent from my GT-N7100 using XDA Free mobile app
Hey guys,
I recently upgraded my device to Lollipop via Kies then discovered that it has no support for Arabic language for menus either, only for input!
The only Lollipop version which is available for this model is USA.
I even tried installing official Russian rom (SER) for N900 series which has Arabic support but Odin stopped me with "Failed" message!
Now that my device has been rooted, is there any possible way to add compatible CSC file or something? (Language Enabler app didn't work)!
I'd really appreciate your help.
Thanks a lot!
Cheers,
Salaam
I've downgraded to a KitKat rom which has an Arabic support.
Thanks anyway!
salam2012 said:
I've downgraded to a KitKat rom which has an Arabic support.
Thanks anyway!
Click to expand...
Click to collapse
yes bro you can get arabic by flashing this rom :
http://forum.xda-developers.com/showthread.php?t=2559321
its based in ANDROID L 5.0 N9005XXUGBOB6
and worked for our n900t , its great so give it try .
you can thanks me after you thanks @AxAtAx :good:
Helped me
I need room lolipop supports the Arabic language and roted
Someone will help you whenever root is achieved and if you post your thread in the correct place.
I need room lolipop supports the Arabic language and roted
moda20092003 said:
I need room lolipop supports the Arabic language and roted
Click to expand...
Click to collapse
Root isn't possible
drewcam888 said:
Root isn't possible
Click to expand...
Click to collapse
But the Arabic language were working on, but after renovation by the Rom lolipop I can not find where Arab and when you return to Ketekat also did not find in him the Arabic language
hi
Samsung note 4 N910p i installed different stock ROM but only got 4 Language English ,Spanish etc got no french language i need a firmware that has got french language very necessary please help me with if someone can help me with
tulipkhan said:
hi
Samsung note 4 N910p i installed different stock ROM but only got 4 Language English ,Spanish etc got no french language i need a firmware that has got french language very necessary please help me with if someone can help me with
Click to expand...
Click to collapse
To add any language you have to decompile system apps and add the language then recompile and push them to the device.
I have already made PJ1(6.0.1) debloated and added multi-language more than 40 languages but I have a very slow internet speed so I couldn't upload it.
Maybe if I find fast Internet I would upload it.
Plz I need that get time help me with please
Sent from my SM-G930F using Tapatalk
tulipkhan said:
Plz I need that get time help me with please
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
Try my custom rom
http://www.mediafire.com/file/8u8p9oi9rx3ixi4/SM-N910P_PJ1_Multi-Languages.zip
But you have to flash the stock PJ1 firmware first from odin.
Then flash my debloated rom via twrp recovery.
I am the only one who tested it so I didn't share it publicly.
So try it and let me know.
Note:
If your device software is newer than PJ1 then try it if it works or downgrade to PJ1.if you couldn't just wait,I may make a new custom rom with multiple languages based on the latest software.
Tried it with russian language. Works great, thank you!
Hi boss
please Im on PL1 MM can I do it?
I need french language
And please on m'y rom PL1 what twrp can I use?
elpichichi said:
Hi boss
please Im on PL1 MM can I do it?
I need french language
And please on m'y rom PL1 what twrp can I use?
Click to expand...
Click to collapse
Just downgrade to PJ1.
flash the official PJ1 tar from odin then after that flash my rom from twrp.
After flashing the PJ1 tar file make it boot for at least one time and flash the latest twrp version of recovery then flash my rom.
It correct my bro
Thank you very much
hi anees
i install ur rom all is ok
i get my french langage
thank you
but i want to know if you can fix the hotspot?
and if i can have french in newest rom?
thanks
my whasapp number: 00228 90003790.
Thank you very much for the language pack for n910p. I installed the Russian language, received a full translation and a certificate in Russian. I wrote the full instruction (in Russian) for installation on the N910p on 4pda.ru http://4pda.ru/forum/index.php?showtopic=630057&view=findpost&p=66035884
rf711ab said:
Thank you very much for the language pack for n910p. I installed the Russian language, received a full translation and a certificate in Russian. I wrote the full instruction (in Russian) for installation on the N910p on 4pda.ru.
Click to expand...
Click to collapse
Hi bro do you use the the same rom? Or newest one
elpichichi said:
Hi bro do you use the the same rom? Or newest one
Click to expand...
Click to collapse
no, I used the N910PVPS4DPJ1. After the firmware, the system was switched on via the OTA to the N910PSPT5DQI5 version (Android v.6.01), but I blocked the update by disabling Wifi.
rf711ab said:
no, I used the N910PVPS4DPJ1. After the firmware, the system was switched on via the OTA to the N910PSPT5DQI5 version (Android v.7.0), but I blocked the update by disabling Wifi.
Click to expand...
Click to collapse
Ok cool
Il looking 4 last update rom with multi language
N910PVPU4COG5 for n910p (5.1.1) with a full set of languages
Hi! I spread the stock ROM N910PVPU4COG5 for n910p (5.1.1) with a full set of languages (added Arabic, all European and other languages). Flashing this ROM through Odin.
http://www.mediafire.com/file/2a5s4rvjj0ccdbj/SPT-SM-N910PVPU4COG5-ARABIC-BY-TOUCHMOBILE+(5.1.1).rar (1.78gb)
details: http://4pda.ru/forum/index.php?showtopic=630057&view=findpost&p=72379323
hi guys, i first installed the russian Nougat update because in germany (DBT) it wasnt out like 2 weeks ago.
So now it's out and i flashed the original german one over it with wiping everything. So far so good. The problem that i have now is that my orginal CSC "DBT" isn't activated.... it automatically installed the "BTU" CSC (UK)
My question now: How can i change back to DBT? I flashed the german CSC again but i doesn't seem to work that way :/ I added some screenshots from Samsung Phone Info App. The Original CSC-Code line is also blank whyever....
thx in advance!
https://forum.xda-developers.com/showpost.php?p=43553707&postcount=14 if it doesn't work i have another method
the same thing with my phone (i have flashed an XEF )
but this csc is not important at all .....
-You have german language
-the playstore have the same apps
- you have the same samsung fonctions apps and parameters .
-the modem have the same European bands
.....
Yeah i flashed the Portuguese rom and somehow got the sloveanian csc. I tried using the method above for changing but it didnt work. It doesnt matter, its the same stuff anyway.
The other method is to flash a single CSC rom and after flash DBT CSC
Chaos107 said:
The other method is to flash a single CSC rom and after flash DBT CSC
Click to expand...
Click to collapse
I know that but where will i download the portuguese rom? I cant from sammobiel at 15kb/s. Im kinda screwed. **** it my phone is slovenian now, i have a new nationality **** it.
StewieTech said:
I know that but where will i download the portuguese rom? I cant from sammobiel at 15kb/s. Im kinda screwed. **** it my phone is slovenian now, i have a new nationality **** it.
Click to expand...
Click to collapse
try to download firmware from here at fullspeed: http://updato.com/firmware-archive-select-model
or here http://live.samsung-updates.com/index.php?device=SM-A520F if you got a premium account from uploaded.net or rapidgator
ill try one of the methods now and i'll report my result than
warboss said:
try to download firmware from here at fullspeed: http://updato.com/firmware-archive-select-model
Click to expand...
Click to collapse
Ah cool bro, thanks!
That's really weird. I installed the german Vodafone software and get this:
warboss said:
hi guys, i first installed the russian Nougat update because in germany (DBT) it wasnt out like 2 weeks ago.
So now it's out and i flashed the original german one over it with wiping everything. So far so good. The problem that i have now is that my orginal CSC "DBT" isn't activated.... it automatically installed the "BTU" CSC (UK)
My question now: How can i change back to DBT? I flashed the german CSC again but i doesn't seem to work that way :/ I added some screenshots from Samsung Phone Info App. The Original CSC-Code line is also blank whyever....
thx in advance!
Click to expand...
Click to collapse
Can you please tell me what is your Knox Warranty Void status after all that flashing? I'm concerned about warranty if I flash german firmware which doesn't have the same csc as mine.
Loulou-13 said:
the same thing with my phone (i have flashed an XEF )
but this csc is not important at all .....
-You have german language
-the playstore have the same apps
- you have the same samsung fonctions apps and parameters .
-the modem have the same European bands
.....
Click to expand...
Click to collapse
Can you tell me your Knox Warranty Void status after flashing that?
marchoffmmann said:
Can you tell me your Knox Warranty Void status after flashing that?
Click to expand...
Click to collapse
my knox is OK ! not tripped... 0-0
i have flashed a "pure" official signed firmware, providing to sammobile beru safe and serious ...
I repeat for csc ! it's not important at all !!!! :angel:
i have an unbranded BTU (multi-csc) firmware ...
Loulou-13 said:
my knox is OK ! not tripped... 0-0
i have flashed a "pure" official signed firmware, providing to sammobile beru safe and serious ...
I repeat for csc ! it's not important at all !!!! :angel:
i have an unbranded BTU (multi-csc) firmware ...
Click to expand...
Click to collapse
Sorry for interuption, but i just want to confirm - you had French firmware and then you flashed Russian and then again went back to French and your original csc has changed during this but your warranty isnt void? Thank you very much.
marchoffmmann said:
Sorry for interuption, but i just want to confirm - you had French firmware and then you flashed Russian and then again went back to French and your original csc has changed during this but your warranty isnt void? Thank you very much.
Click to expand...
Click to collapse
sorry ,i didn't have precised ...
original provider firmware (sfr france) MM 6==> flash XEF unbranded MM6 firmware with odin providing to sammobile ( but it's a multi-csc firmware and BTU is the csc-master)==> i wait OTA for N7
But when i have flashed this MM unbranded ,i didn't have had problem with my knox
As i have said ,if you flash a FULL official signed firmware ,in theory it's ok :good:
same on me ! rom is from romania and csc is from CZ. what this means ? csc
if i downgrade to mm ? now from nougat