Hi. I have a problem with Touch Pro 2. There is stock rom, never updated. But system is behaving very bad. Even touch works only when it wants (maybe physical damage, but I want to have new WM). But installation stops at 1% and phone reboots. Problem is that I have set a password on WM. There is a problem with touch in menu, so I can't remove it. May that be the problem that this secure makes flashing even stock roms impossible? I have no free SD, so only flash via RUU.
kubekpop said:
Hi. I have a problem with Touch Pro 2. There is stock rom, never updated. But system is behaving very bad. Even touch works only when it wants (maybe physical damage, but I want to have new WM). But installation stops at 1% and phone reboots. Problem is that I have set a password on WM. There is a problem with touch in menu, so I can't remove it. May that be the problem that this secure makes flashing even stock roms impossible? I have no free SD, so only flash via RUU.
Click to expand...
Click to collapse
Have you tried a hard reset? I believe it's called "Clear Storage" from settings.
Or hold talk/send + power + vol down while the device is OFF.
I can't clear storage because touch is broken in menu. That's why I want to reinstall it.
kubekpop said:
I can't clear storage because touch is broken in menu. That's why I want to reinstall it.
Click to expand...
Click to collapse
Then do my other suggestion...
But it doesn't work. It boots into bootloader. Does it work for you?
kubekpop said:
But it doesn't work. It boots into bootloader. Does it work for you?
Click to expand...
Click to collapse
Perhaps those weren't the right keypresses...
Try this:
A Hard Reset restores the device to its default settings — the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on the device will be lost. Only Windows Mobile software and other pre-installed programs will remain.
There are 2 ways to perform a Hard Reset on this device:
Menu Path
Access the Settings Tab>All Settings>System>Clear Storage
Follow the onscreen instructions.
Keystroke Method
1. With the device turned off, press and hold the VOLUME DOWN, TALK/SEND, and END/POWER buttons until you see this message on the screen.
2. This operation will delete all your personal data, and reset all settings to manufacturer default. Press Vol Up to restore manufacturer default, or press other keys to cancel.
3. Release the VOLUME DOWN, TALK/SEND, and END/POWER buttons.
4. Press the VOLUME UP button to restore the operating system to the factory default configuration, press the VOLUME DOWN button to restore the factory default configuration and remove any operator customization, or press any other button to cancel the reset.
Click to expand...
Click to collapse
Ok, I will try this when I will heve access to it It's my friend's phone, I wanted to help. GR8 THX, I hope it will help.
I have upgraded last month to Official ICS (notification by Acer) 4.0.4.
I've downloaded 1st update new HC after 2nd Update ICS
But the ICS works very bad
I've tryed downgrade HC/ upgrade to another ICS with volume button and power but when i press them go to recovery.img then a image with a ''DEAD'' Android Apperas
PLEASE HELP ME TO DOWNGRADE BACK TO HONEYCOMB
upppp
Make sure you have a valid copy of 3.2 HC. Make sure the file is named "update.zip" properly, it is located on the mnt/external_sd folder, and there are no other "updates" on there.
I used this copy of HC 3.2, just stop short of the large ICS update. You will require a factory reset (thru recovery) as when you downgrade it will get caught in a boot loop at the android logo.
http://forum.xda-developers.com/showpost.php?p=23008670&postcount=5
How to factory reset from recovery:
1. Place the rotation lock switch in the up position
2. Press and hold the Volume down button, which is located farthest from the rotation lock
3. With the Volume down button held, press and hold the Power button for 3 seconds then release it. Continue holding the Volume down button.
4. Once the tablet vibrates, switch the rotation lock on and off repeatedly while still holding the Volume down button.
5. Release the Volume down button and stop switching the rotation lock once the "Erasing Userdata..." message appears in the upper left corner of the screen
6. Once the factory reset has been completed your tablet will load to the Welcome screen.
7. Your Factory Data Reset has completed now follow the onscreen steps to setup your tablet.
External_sd means Tablet internal storage or a SD Card storage ??
External_SD is the external microSD memory card. SDcard is the internal memory.
I don't think you can update from the internal memory, but I have never tried. So it may be possible.
will this update.zip replace the bootloader. The reason I ask is that stock android 4.x comes with a locked bootloader that is said to be incompatible with 3.2. When you successfully downgraded, was your bootloader a locked, unlocked or did it matter at all?
thanks
ROM EviLocity 1.0 Android 2.2 Rabid ROM ----- Elocity A7+ ONLY!!!!!!!!!!!!
Main features:
- Fully rooted with proper edit to boot.img for ro.secure+0 in the default.prop
- Based on last official 3.0022 firmware ( All A7+ no old A7 components).
- Edited proper default prop to 0,1,1,1 instead of 1,0,0,0
- Removed bloat apps
- Added EStrong Suite - Task, Security, and File Manager, and Rootexplorer.
- WiFi tweaks.
- Build.prop edits for performance, ram consumption (360MB free, varies).
- 1% Battery MOD
- Some graphics and font changes
- Duplicated libraries deleted.
- Some build.prop tweaks to improve performance, wifi responsiveness, and better ram consumption, etc
- Use UOT screen transitions
- New boot animation. "Zombies" ( unfortunately the system boots so fast now, you only get to see the whole thing the first boot. LOL)
- As far a testing goes everything works
Issues - None it did not have already(so far). Still has the SOD (sleep of death) issue. I have found that utilities that can set WiFi to "sleep never" help and I used Overclock widget to set the minimum power to 500MHZ. The system by default drops to about 150-200MHZ and when it drops that low it seems to hang. I have also found having something plugged into the USB can be removed and replaced quickly and the remount causes it to let you take it out of sleep. Perhaps other overclock tool can do the same and work better?
Download EviLocityV1.0
When installing an 8GB or smaller microsd works well.
Install Instructions:
This runs like a normal update so you should still have your apps, but the following is the best way to flash this ROM. Either way backup your files before using.
If by using this mod the world comes to and end, or you are suddenly sucked back in time only to accidentally kill your grandfather leaving your future uncertain, I take no responsibility for the consequences. Oh yeah. same thing if it screws up your tablet.
USE AT YOUR OWN RISK. REMEMBER TO BACKUP ANY THING YOU WANT SAVE BEFORE FOLLOWING THESE INSTRUCTIONS. THIS WILL WIPE YOUR TABLET TO A CLEAN FACTORY-ISH STATE.
I have not tried using the built in update process in the system settings, feel free to give it a shot first, but this is the best way in MHO. Always have at least 50% battery but better still be plugged into power.
1. Copy the the update.zip file to a microsd either directly on your PC or through USB to the tablet external drive. In this case /sdcard/sdcard-disk0. Make sure it is the only update file on the card.
NEVER INSTALL ANY UPDATE FROM THE INTERNAL STORAGE. If something should go wrong you could be stuck with that same image reloading every time you try to go into recovery and you may never have a way to remove or get past it.
2. With the tablet powered off power on by holding down power button for two seconds, then release and press again and hold until you see the message " Hold power for 5 sec...."
3. Release power after the message "booting recovery kernel".
4. Wait until the Android with the triangle and exclamation over it's head pops up.
5. Press the home button to bring up the recovery menu. Use back to move down, and menu to select
6. Scroll down and select Wipe data & cache, then select Yes delete all user data . The tablet will reboot, just press and hold power until you see the recovery loading message again.
7. When complete select Wipe cache partition and wait until complete.
8. Select Apply update from external sdcard.
9. Scroll to the update.zip file and select it.
10. Wait for it to complete then select Reboot system now when prompted. Device will go through a few screen changes just sit back and wait for the boot animation.
The first boot will be slow as it has to rebuild the cache.
Thank you for the custom rom, everything functions well. However, visually, it's atrocious.
thank you. can't wait to try this rom out. im getting my A7+ in 3 weeks.
Sent from my HTC Glacier using Tapatalk 2
does this rom have the play store or market?
it does not.
found some issues
Okay after fooling around with it for a week.i have some questions;
The mic no longer works and when you have to enter a date, the dails always reset to 2014. Is this just me? Do you have any suggestions?
Awesome Post. Thanks
shamondo said:
Okay after fooling around with it for a week.i have some questions;
The mic no longer works and when you have to enter a date, the dails always reset to 2014. Is this just me? Do you have any suggestions?
Click to expand...
Click to collapse
Sorry for not getting back sooner but the mic works for me. I will have to check, but my date is showing correct right now.
I AM NOT RESPONSIBLE FOR ANYTHING NEGATIVE THAT HAPPENS TO YOUR PHONE!!
ALSO WORKS FOR T-MOBILE DART!!
Never Hurts to Thank or GIFT to all that help you!
NO PC NEEDED!!!!!!!!:highfive:
Necessary downloads from the Play Store
SuperUser or SuperSU -- One will work, the other won't -- [/COLOR][/SIZE] --A MUST HAVE for any rooted phone! Superuser/SuperSU is the app that manages what apps on your rooted device have access to su. Apps that are granted su have elevated permissions and can modify just about any part of the system. The app consists of two parts, Superuser.apk and the su binary.
Superuser.apk runs as any other app and gives you, the user, a place to see what apps you have allowed or denied, as well as view a log of what apps have used su when.
Link2SD-- DO NOT USE until rooted.--Link2SD is an application that makes it easy for Android 1.6+ users with root privileges on their phone to move applications to the SD card.
The idea behind is same with apps2sd scripts, linking applications to SD card's second partition but differs in two ways.
One, instead of linking /data/app folder (that means moving all applications), you can select applications that you want to move.
Two, it's an application which means has a user interface. You can manage your applications with few clicks.
It also provides native apps2sd features on Android 2.2 and higher. It can move any non-protected user apps to SD card (force move), with batch moving capability.
That feature uses Android's standard SD-card installation feature and does not require a second partition. It can break some apps if they are not meant to be moved to the SD card (Such as Widgets).
BusyBox--DO NOT USE until rooted. --A MUST HAVE for any rooted phone! Almost EVERY rooted applications needs BusyBox to perform their magic, if you have a rooted phone then you NEED BusyBox.
Pro version contains Backup feature (for safer installs), uninstall feature, Advance Smart install feature, the ability to hand pick the applets you want, safety check for missing applets on start, and better overall support. The pro version will receive more frequent updates than the free version will.
Root Checker (optional)--Checks for ROOT -- Use AFTER Installing a Superuser app.
BOOT-LOOP FIX
1.) Power off the phone by removing the battery.
2.) Replace battery.
3.) Boot into recovery by holding Volume DOWN and power button until the android with the triangle appears. This will appear AFTER the android that is by himself!! (about 30 seconds)
4.) Press the home button
5.) Navigate to the 3rd choice - " wipe data/factory reset". Select by pressing the menu button
6.) Navigate to YES and select by pressing the menu button.
7.) When the wipe is complete, navigate to and select - "reboot system", again with the menu button.
ROOTING
2.3.7 BUILD V768V1.0.0B08 = NO FACTORY RESET NEEDED???Maybe
2.3.7 BUILD V768V1.0.0B19 = FACTORY RESET NEEDED???Maybe.
2.3.7 BUILD V768V1.0.0B20 = FACTORY RESET NEEDED
1.)Using your PHONE or computer - Download attached update.zip file.
2.) copy/move update.zip to root of sdcard
3.) Power off the phone
4.) reboot into recovery by holding Volume DOWN and power button until the android with the triangle appears . This will appear AFTER the android that is by himself!!(about 30 seconds)
If for some reason, you CANNOT boot into recovery try to FACTORY RESET.
5.) At this screen, Press the HOME button.
6.) scroll to your second option, navigating with the volume buttons - "Apply update from sdcard" and press the Menu key
7.) select UPDATE.ZIP to install
8.) Navigate to YES, if asked, and press the menu key.
9.) Navigate to - "reboot system now" and select by pressing the menu key.
10.) Install SuperUser. I installed SuperUser and Root Checker before installing the update.
11.) Install Busybox - Using the SMART INSTALL feature. Get it from the play store.
12.) Follow this guide - if you are going to partition an SD Card - It will show you how to partition the SD Card and install Link2SD :
Partition you SD Card To Acquire more "Internal Memory"
Congratulations!! You are now ROOTED and have more "Internal Memory"!!
Special THANKS to JCASE for his CREATION of the ZTE MERIT UPDATE.ZIP
I did the boot-loop process and then the root process. I had no errors and was rooted on the first try. You should not need to factory reset. This is only the boot- loop fix and root. No new recovery or roms.
Anyone else try this?
Liquidsmooth GSII
Hi fathertomany,
Thank You, it worked, root granted and superuser installed.
Wow, I may be only the second person in the world after you to get one rooted
So to confirm and Thank, Yes, this rooted it easy and quick, can't believe it but awesome!
Thanks!
b7
Wow 230 views and only 1 other person telling me it worked for them? I would like to keep up with this and maybe figure out some way to get roms and such, like twrp, themes, etc... But I need to know if there are any bugs or not by following these instructions. I am not a DEV but am willing to try to accomplish things people want. Currently trying to get twrp ported by someone for this phone. Whoever is willing to work on the port should pm me.
Hey I'm new to posting but I've been on android for a few years. I'm having troubles with booting into recovery mode. Whenever I try it shows some yellow text at the bottom. Something about the data directory. Think u can help me fix this please? Thank u
[Edit] My phone has been doing that since way before I downloaded the zip file. So just to clarify it has nothing to do with the file
Sent from my ZTE V768 using xda app-developers app
need help booting into recovery
fathertomany said:
I AM NOT RESPONSIBLE FOR ANYTHING NEGATIVE THAT HAPPENS TO YOUR PHONE!!
Never Hurts to Thank or Donate to all that help you!
I have boldly went where no one has gone before. After much soul searching about bricking my son's phone because I have only followed guides, I decided that this phone was so similar to the AVAIL/MERIT that I would use that method to root his Concord. I did this because his phone ran out of memory and subsequently got stuck on boot-loop. Because this worked, I wrote this tutorial.
NO PC NEEDED!!!!!!!!
This quick tutorial will help you get into recovery and root.
What files are needed are not my work! I only decided to use the ZTE MERIT GUIDE AND ZIP for my son's T-mobile Concord(V768).
To get out of the BOOT-LOOP
1.) Power off the phone by removing the battery.
2.) Replace battery.
3.) Boot into recovery by holding Volume- and power button until the android with the triangle appears. this will appear AFTER the android that is by himself!!
4.) Press the home button
5.) Navigate to the 3rd choice - " wipe data/factory reset"
6.) Select by pressing the menu button
7.) When the wipe is complete, navigate to and select - "reboot system"
To Root
1.) Download attached update.zip file
2.) copy/move update.zip to root of sdcard
3.) Power off the phone
4.) reboot into recovery by holding Volume- and power button until the android with the triangle appears.
5.) At this screen, Press the HOME button.
6.) scroll to your second option, navigating with the volume buttons - "Apply update from sdcard" and press the Menu key
7.) Navigate to YES and press the menu key (no data will be wiped but the update will be installed and you will be rooted)
8.) Navigate to - "reboot system now" and select by pressing the menu key.
9.) Install superuser or equivalent. I installed Superuser and root checker before installing the update.
If for some reason, you get an error, try to factory reset first.
Congratulations!!! You are now Rooted!!
Special THANKS to JCASE for his work on the ZTE MERIT UPDATE.ZIP mentioned above. The UPDATE.ZIP file was downloaded from Stayboogy's tutorial.
Click to expand...
Click to collapse
What carrier and version and build number are you on? You can find that under settings--> about phone. My carrier is Family Mobile (which runs on T-Mobile) and I'm running Android 2.3.7 and Build number V768V1.0.0B20.
I am having trouble getting the Concord to boot into recovery. I can't seem to get to a screen with a triangle. Can you walk through the steps to get it into recovery again or possibly post a video?
The video stayboogy supplied in the link you posted for the Avail/Merit said to put the phone into recovery mode by holding the volume up key and the menu key while pressing the power button. When I do that the concord freezes at the green android logo and does not go into recovery mode and does not boot normally. I have to pull the battery. Same thing if I hold both of the volume buttons and the menu key.
If I hold the volume down and the menu key (or just the volume down key or just the menu key) and turn on the power button I get the green android startup screen followed by a screen with a white box and an orange arrow coming out of the box pointing to a small green android. When I get to this screen pressing home or the volume up or down buttons just cause it to reboot.
bkool96 said:
Hey I'm new to posting but I've been on android for a few years. I'm having troubles with booting into recovery mode. Whenever I try it shows some yellow text at the bottom. Something about the data directory. Think u can help me fix this please? Thank u
Sent from my ZTE V768 using xda app-developers app
Click to expand...
Click to collapse
I personally have not noticed this. make sure your phone is off. make sure you press the volume down button first. while still holding the volume down button press and hold the power button. DO NOT let go of either button until the android with the triangle appears. you will see the android by himself first, CONTINUE HOLDING THE BUTTONS FOR ABOUT 30 SECONDS. When the android with the triangle appears, you can let go of both buttons. Then press your home button. this should bring up your recovery menu.
USE THE VOLUME BUTTONS TO NAVIGATE UP AND DOWN.
USE THE MENU BUTTON TO SELECT YOUR CHOICES. I
BELIEVE, THE POWER BUTTON ACTS AS THE BACK BUTTON? (MAYBE JUST USE THE BACK BUTTON.) I will check this when my son gets home from school. he is the one with the phone.
remember there is NO factory wipe necessary, unless you are trying to get out of the boot-loop.
iamhdr said:
What carrier and version and build number are you on? You can find that under settings--> about phone. My carrier is Family Mobile (which runs on T-Mobile) and I'm running Android 2.3.7 and Build number V768V1.0.0B20.
I am having trouble getting the Concord to boot into recovery. I can't seem to get to a screen with a triangle. Can you walk through the steps to get it into recovery again or possibly post a video?
The video stayboogy supplied in the link you posted for the Avail/Merit said to put the phone into recovery mode by holding the volume up key and the menu key while pressing the power button. When I do that the concord freezes at the green android logo and does not go into recovery mode and does not boot normally. I have to pull the battery. Same thing if I hold both of the volume buttons and the menu key.
If I hold the volume down and the menu key (or just the volume down key or just the menu key) and turn on the power button I get the green android startup screen followed by a screen with a white box and an orange arrow coming out of the box pointing to a small green android. When I get to this screen pressing home or the volume up or down buttons just cause it to reboot.
Click to expand...
Click to collapse
You can find most of that in the title "Confirmed!! T-Mobile Concord (V768) ROOT and BOOT-LOOP fix!!"
My Android BUILD will be posted when my son gets home. he has the phone. It should be the same. I am using the same carrier with the same version of android. Android 2.3.7
I am also on the family mobile plan.
fathertomany said:
I personally have not noticed this. make sure your phone is off. make sure you press the volume down button first. while still holding the volume down button press and hold the power button. DO NOT let go of either button until the android with the triangle appears. you will see the android by himself first, CONTINUE HOLDING THE BUTTONS FOR ABOUT 30 SECONDS. When the android with the triangle appears, you can let go of both buttons. Then press your home button. this should bring up your recovery menu.
USE THE VOLUME BUTTONS TO NAVIGATE UP AND DOWN.
USE THE MENU BUTTON TO SELECT YOUR CHOICES. I
BELIEVE, THE POWER BUTTON ACTS AS THE BACK BUTTON? (MAYBE JUST USE THE BACK BUTTON.) I will check this when my son gets home from school. he is the one with the phone.
remember there is NO factory wipe necessary, unless you are trying to get out of the boot-loop.
Click to expand...
Click to collapse
I tried again with no luck. In the Root ZTE Concord thread a few of us tried and were never able to get into recovery mode.
I just tried the steps you listed but I get the same screen with the white box and arrow and if I continue to hold the power and volume down button it causes the phone to reboot. If I keep holding down the power and volume down even after it reboots it just repeats, green android screen, white box screen, reboot, green android screen, white box, reboot, etc. I can record a video of the screen later today if you are interested.
Did you ever install an over the air update? I did months ago and I wonder if that update changes or removes how to get into recovery mode.
I have T-Mobile android 2.3.7 build number V768V1.0.0B19
Sent from my ZTE V768 using xda app-developers app
iamhdr said:
I tried again with no luck. In the Root ZTE Concord thread a few of us tried and were never able to get into recovery mode.
I just tried the steps you listed but I get the same screen with the white box and arrow and if I continue to hold the power and volume down button it causes the phone to reboot. If I keep holding down the power and volume down even after it reboots it just repeats, green android screen, white box screen, reboot, green android screen, white box, reboot, etc. I can record a video of the screen later today if you are interested.
Did you ever install an over the air update? I did months ago and I wonder if that update changes or removes how to get into recovery mode.
Click to expand...
Click to collapse
I will attempt to find this screen later when my son gets home. 3:30pm central.I have only owned the phone for about 1 1/2 months. I do not believe that I have received any update OTA or any other way. my son downloads a lot of CRAP. He eventually got stuck in the pink logo boot-loop. I proceeded to do the boot-loop fix that I listed and after the factory reset to get out of it, I confirmed that it booted normally, turned the phone off and went back into recovery.
One thing I did notice about this phone is the power button. It is "weird". I am one of those that mash the buttons EXTRA hard to insure that they are being pressed. I make sure that I use both hands, one finger on each hand for each button and I hold as still as possible. Making sure that I don't toggle any buttons. at first, my phone would some how be stuck on the green android that is by himself. What your are saying sounds similar but I never noticed the white box. I think that this might be the download mode. if you have some kind of case on the phone, try removing it.
OTA update?
bkool96 said:
I have T-Mobile android 2.3.7 build number V768V1.0.0B19
Sent from my ZTE V768 using xda app-developers app
Click to expand...
Click to collapse
Have you ever applied the over the air update? I have and I wonder if that has eliminated the ability to get into recovery mode.
I stated in my previous post that I have not noticed one. I bought the phone at the end of February. I rooted the phone the night before I posted this tutorial. I will check the build version as soon as my son gets home. FYI, The rom is totally stock as no one has had this rooted, unlocked bootloader or otherwise, that I know of.
Sent from my LIQUIDSMOOTH SGH-T989
fathertomany said:
I will attempt to find this screen later when my son gets home. 3:30pm central.I have only owned the phone for about 1 1/2 months. I do not believe that I have received any update OTA or any other way. my son downloads a lot of CRAP. He eventually got stuck in the pink logo boot-loop. I proceeded to do the boot-loop fix that I listed and after the factory reset to get out of it, I confirmed that it booted normally, turned the phone off and went back into recovery.
One thing I did notice about this phone is the power button. It is "weird". I am one of those that mash the buttons EXTRA hard to insure that they are being pressed. I make sure that I use both hands, one finger on each hand for each button and I hold as still as possible. Making sure that I don't toggle any buttons. at first, my phone would some how be stuck on the green android that is by himself. What your are saying sounds similar but I never noticed the white box. I think that this might be the download mode. if you have some kind of case on the phone, try removing it.
Click to expand...
Click to collapse
I tried again and made sure to hold the buttons firmly without moving but have the same result. Maybe your son never applied the OTA update and that's why you can get in recovery mode.
---------- Post added at 01:15 PM ---------- Previous post was at 01:12 PM ----------
fathertomany said:
I stated in my previous post that I have not noticed one. I bought the phone at the end of February. I rooted the phone the night before I posted this tutorial. I will check the build version as soon as my son gets home. FYI, The rom is totally stock as no one has had this rooted, unlocked bootloader or otherwise, that I know of.
Sent from my LIQUIDSMOOTH SGH-T989
Click to expand...
Click to collapse
I was just wondering if the OTA update was applied by bkool96 and maybe that's why we both can't get recovery mode to boot.
If you are willing to back up what you can and then do a factory restore. You might have luck that way. I will try to get into recovery later today since my son has been using the phone but I may still be able to seeing as how I am already rooted.
Sent from my LIQUIDSMOOTH SGH-T989
Also, googling it, I noticed that I may be A** backwards. Meaning, Try Volume UP and the power button. If that works then I will edit the tutorial.
Sent from my LIQUIDSMOOTH SGH-T989
fathertomany said:
Also, googling it, I noticed that I may be A** backwards. Meaning, Try Volume UP and the power button. If that works then I will edit the tutorial.
Sent from my LIQUIDSMOOTH SGH-T989
Click to expand...
Click to collapse
I'm pretty sure its volume down+power button. Im stuck at the green android with volume up and I get into recovery with volume down for like 3 seconds then it reboots with a yellow error message mentioning something about the /data directory
Sent from my ZTE V768 using xda app-developers app
When you press the volume up and power buttons, DO NOT let them go until the Android with the triangle appears. Then follow the rest of the guide. I remember getting frozen at the green Android by himself.:banghead:
Sent from my LIQUIDSMOOTH SGH-T989
fathertomany said:
When you press the volume up and power buttons, DO NOT let them go until the Android with the triangle appears. Then follow the rest of the guide. I remember getting frozen at the green Android by himself.:banghead:
Sent from my LIQUIDSMOOTH SGH-T989
Click to expand...
Click to collapse
I tried it again and its still a no go. Maybe its my phones build number that the recovery mode doesn't like?
Sent from my ZTE V768 using xda app-developers app
---------- Post added at 01:32 PM ---------- Previous post was at 01:25 PM ----------
iamhdr said:
Have you ever applied the over the air update? I have and I wonder if that has eliminated the ability to get into recovery mode.
Click to expand...
Click to collapse
I updated back at the end of December which fixed problems I had with mounting the USB storage on my Mac
Sent from my ZTE V768 using xda app-developers app