I feel helpless now, sorry ahead of time if someone instantly redirects me to a section of the website. I've been searching forums for almost 5 hours now and have gotten nowhere. I sent my phone in to get the brick fixed and had him root it at the same time... I'm running 2.3.4 kernel version 2.6.35.7 gb.eh17? So i'm assuming this is a stock rom? I have no cwm for my phone, i haven't been able to flash it or install it whatsoever, I get failed signature everytime. Now I understand that 2e as opposed to 3e (which I have) allows unsigned files to be installed, but I haven't been able to find a way to revert back to that.. There's kernels that I can download that come with cwm but those have root files in them too.. will this mess anything up? could I flash a kernel to my phone with the root files and in turn have cwm working? how do I know what kernels will work for my phone and firmware version specifically? I just want to do cool things to my phone now! I'm feeling i've wasted money to have it rooted since I can't do a damn thing with it right now.. SORRY for the long post, it's been 5 hours of running in circles and i'm quite frustrated. Any help at all is very much appreciated!!!
Lots of questions. First of all you can't flash anything in stock recovery not put out by Sprint or Samsung. Next you will need to use Odin to install CWM since no one click version works with GB. EH17 is a leaked ROM not official. Official version of GB is EI22. You can Odin in an EC05 ROM prerooted and then flash a EI22 prerooted ROM then if you want to change the modem flash the EC05toEI22 modem file. Here are some threads to help you:
Odin and how to use it:
http://forum.xda-developers.com/showthread.php?t=1052813
EC05plus ROM:
http://forum.xda-developers.com/showthread.php?t=1061912&highlight=ec05plus
Modems:
http://forum.xda-developers.com/showthread.php?t=1123103
This method you will lose all data so make sure your contacts are on Google and not the phone. Or export your contacts to the sd card.
thanks!! the links are broken but I believe I know where to go with this now, all I have to do is install a new rom/cwm via odin? which will just replace my stock "rom" I guess. I've been scared to even think about that considering that's how I bricked it the first time. Thanks for your time!
Which links are broken? If you are able to get into download mode it is never bricked.
Sent from my SPH-D700 using XDA App
I just flashed my at&t GS3 to Cyanogens Cm10 m2 using clockworkmod and am wondering what the procedure to flash back to stock is, so as to receive the official JB update from at&t whenever that may be.
I made a back up of my stock rom in clockworkmod but what if a user did not make a backup of the stock rom?
Thanks
rootitnbootit said:
I just flashed my at&t GS3 to Cyanogens Cm10 m2 using clockworkmod and am wondering what the procedure to flash back to stock is, so as to receive the official JB update from at&t whenever that may be.
I made a back up of my stock rom in clockworkmod but what if a user did not make a backup of the stock rom?
Thanks
Click to expand...
Click to collapse
The following thread has a section that explains with YouTube video demonstrations how to unroot and return to stock ROM.
http://forum.xda-developers.com/showthread.php?t=1728824
I am not entirely sure if I followed that particular instructions video or another, but in summary I downloaded the Stock ICS ROM which can be found in a thread somewhere around here in XDA, then I downloaded ODIN (also can be found on XDA) and used it to flash the Stock ICS ROM through it after having booted the phone into Download Mode and connected it. Check the thread and see if the instructions are similar to what I just described.
I know with my last phone (skyrocket aka i727) you can oden the stock firmware from sammobile with original recovery without triggering the flash counter.
Does this work with the s3?
Sent from my SAMSUNG-SGH-I747M
Yes as long as it is the OEM rom.
I am trying to find the easiest way possible for someone to flash the updated md4 stock rom. This person is already rooted. They want to upgrade so they will have multiwindow. They are in another city so I cant do it myself. I remember Treve has a rom that backs up your rom before it flashes the unrooted stock. I was wondering is there something similar to that but will flash the rooted latest stock?
Here is the thread with the md4 modem/baseband. I've never seen a ROM that makes a back up for you. You can make nandroid while in recovery. That will be the back up you need in the event of a problem.
http://forum.xda-developers.com/showthread.php?p=32152586
sent from GS3 gone Wicked
mystery_tx_man said:
I am trying to find the easiest way possible for someone to flash the updated md4 stock rom. This person is already rooted. They want to upgrade so they will have multiwindow. They are in another city so I cant do it myself. I remember Treve has a rom that backs up your rom before it flashes the unrooted stock. I was wondering is there something similar to that but will flash the rooted latest stock?
Click to expand...
Click to collapse
Using ODIN is the best way to go. This link explains everything. All that person needs to know is how to open the ODIN, select file under PDA option and click Start.
mystery_tx_man said:
I am trying to find the easiest way possible for someone to flash the updated md4 stock rom. This person is already rooted. They want to upgrade so they will have multiwindow. They are in another city so I cant do it myself. I remember Treve has a rom that backs up your rom before it flashes the unrooted stock. I was wondering is there something similar to that but will flash the rooted latest stock?
Click to expand...
Click to collapse
Forget using Odin, your friends s3 is already rooted no need to go through all that useless work.
The easiest way is to flash Freezas prerooted stock md4 rom http://forum.xda-developers.com/showthread.php?p=32176586
Sent from the future via Tapatalk 4
I rooted my phone then used CWM RomManager to make a backup image of the rooted stock rom. Then put KitKat on the phone. Since then I have restored the Rooted stock Rom. Now every time the phone boots I get the Upgrading Android message and the phone is kind of buggy. I am having trouble finding instructions anywhere on how to get it back to complete stock. If someone could point me in the right direction I would appreciate it.
Thanks
What stock AT&T rom were you running when you created the backup?
Oh I guess I should have mentioned that huh.. it was 4.3
Have you tried flashing the 4.3 update.zip file you can find in the developers forum here: http://forum.xda-developers.com/showthread.php?t=2387423.
I feel like you ought to be able to copy the 4.3 zip file to your SD Card and flash via recovery and it should work, although I haven't tried it so I can't be sure.
Hello, I am currently rooted and have CWM 6.0.4.3. installed. I'm on CM11 but want to go back to stock.. Is there an easy way to keep root and go back to stock. Want stock for a few functions that ROMS dont seem to be offering but can keep root and CWM ??
Thanks.
Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.
Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins
DeathNotice said:
Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins
Click to expand...
Click to collapse
Ok perfect, thats what I was looking for. Phone btw is S3 - d2att - SGH i747) Sounds good to install the stock rom and re-root.. I'm sure its here but I have searched everywhere to find a tutorial on this and I cannot find a straight answer.
Would you mind giving me the steps or pointing me to a thread that explains how to and has the files in need to download ?
audit13 said:
Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.
Click to expand...
Click to collapse
Do you know if there is a step by step on this somewhere ? I dont mind going back to complete stock.. I can just re-root and flash CWM after.
OR
Maybe you could just answer the bigger question : the reason I want to go back to stock is I need to use MHL/HDMI which CM11 doesnt support. I dont want to go back to stock, I would rather even go to another ROM that supports mhl/hdmi.. but if I have to go to stock, than so be it.?
Were you running the stock AT&T 4.3 ROM before you switched to CM11?
audit13 said:
Were you running the stock AT&T 4.3 ROM before you switched to CM11?
Click to expand...
Click to collapse
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.
robberrobbie said:
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.
Click to expand...
Click to collapse
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426
audit13 said:
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426
Click to expand...
Click to collapse
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?
robberrobbie said:
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?
Click to expand...
Click to collapse
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
audit13 said:
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
Click to expand...
Click to collapse
Ok thanks, I will do that. 1 thing I'm not quite sure of is the bootloader situation ? In the first tutorial there is a note : Flashing a prior bootloader can hard/soft brick your device. How do I know ?
I see the steps as:
Extract tar file you downloaded.
Use Odin, put phone into download mode [with phone off, hold vol. down + home + power ], connect to computer and open Odin.
once in odin click the PDA field and select the tar file
Leave Auto Reboot and F. Reset Time checked.
click start and when done let phone reboot.
If you just want a stock, rooted phone with no custom recovery, no plans to flash custom roms, etc. then you can stop HERE.
For my situation, is it just that easy ?
Before flashing, verify the version of your bootloader.
audit13 said:
Before flashing, verify the version of your bootloader.
Click to expand...
Click to collapse
OK I have made an effort to go read and figure out how to find out what version of bootloader on my own.. But i cannot find ? Any chance you know... And could help?
You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?
Hey. I got the i747m. As for what was the last stock ROM I had, can't say. I know when I bought the phone it was ICS and I had received and update to jellybean.. But them went to cm10. The tutorial I followed told me had me back everything up, which I did. Have it in a file somewhere on my comp, would that tell me ?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Ariesdroid said:
If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have not seen a stock mf1 ROM that can be flashed in CWM. You could use mobile Odin to flash back to stock and then flash Philz Touch via desktop Odin later.
OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?
audit13 said:
You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?
Click to expand...
Click to collapse
Hey there Audit, Sorry to bother you again, I just dont know how to move forward from here and neeeeeed some help.
I have been reading for days and days have not found a straight answer for my issue and I dont want to just go ahead and start flashing when I dont know if its the right method ?
I dont know how to get back to stock from where I'm at, I dont know how to figure out what bootloader I have (you asked me)
I have found a couple links on XDA that I can follow, I'm just not sure if they apply to my situation ?
This is a pretty detailed response/tutorial, but I dont know if I can just go ahead with this or not ?
http://forum.xda-developers.com/showthread.php?t=2186967
This is also very detailed: http://forum.xda-developers.com/showthread.php?t=1739426
Any help would be greatly appreciated !
robberrobbie said:
OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?
Click to expand...
Click to collapse
If you are sure you have the Rogers i747m and you have never loaded a stock Rogers 4.3 ROM onto your phone, you could use desktop Odin to flash a pre-rooted 4.1.2 ROM from here: http://forum.xda-developers.com/showthread.php?t=1739426.
Flashing the pre-rooted 4.1.2 ROM will return the phone to completely stock, wipe out all installed apps and data, and you will have root. I do not recommend flashing the Rogers 4.3 pre-rooted ROM from the link.
Once you are able to boot into the phone and set things up, you can flash Philz Touch from Odin which will give you a custom recovery on a rooted stock 4.1.2 ROM.