Dear Forum Members,
I have a problem with my Desire HD.
My phone is rooted and has the 3.0.0.5 ClockworkMod Recovery installed.
I wanted to install Cyanogenmod 7 Nightly Build 14 for HTC Desire HD.
Iv'e downloaded the .zip file and put it on my SD-Card.
I went to ROM Manger and tried both ways (Install ROM from SD-Card ore Reboot in recovery mode and install it there).
Both ways I ended up getting this strange message:
Installing update…
assert failed: getprop("ro.product.device") == "bravo" || getprop("ro.build.product") == "bravo" || getprop("ro.product.board") == "bravo"
E:Error in /sdcard/cm_bravo_full-14.zip
(Status 7)
Installation aborted.
Is any one seen this error before? and if so can you please help me.
Kind Regards,
Whiteness.
Whiteness said:
Dear Forum Members,
I have a problem with my Desire HD.
My phone is rooted and has the 3.0.0.5 ClockworkMod Recovery installed.
I wanted to install Cyanogenmod 7 Nightly Build 14 for HTC Desire HD.
Iv'e downloaded the .zip file and put it on my SD-Card.
I went to ROM Manger and tried both ways (Install ROM from SD-Card ore Reboot in recovery mode and install it there).
Both ways I ended up getting this strange message:
Installing update…
assert failed: getprop("ro.product.device") == "bravo" || getprop("ro.build.product") == "bravo" || getprop("ro.product.board") == "bravo"
E:Error in /sdcard/cm_bravo_full-14.zip
(Status 7)
Installation aborted.
Is any one seen this error before? and if so can you please help me.
Kind Regards,
Whiteness.
Click to expand...
Click to collapse
The error messages suggest your trying to install the ROM for Bravo or the original Desire, I think you may have the wrong ROM?
Good be now downloading the ace version
Let you know!
Hey everyone,
I'm currently trying to install the latest CM10 FXP131 ROM on my Arc S Lt18i. I flashed my phone to the first ICS Stock ROM by Sony and rooted it to install CWM Recovery.
Now, the next step was to flash the ROM. So I downloaded the Anzu version of the ROM, copied it to my SD and changed into Recovery mode. I picked "install zip from sdcard" and chose the ZIP I've just downloaded.
But instead of installing the ROM I got a error every time. It says
E:Error in /sdcard/cm-10-20120731-UNOFFICIAL-anzu.zip
(Status 7)
Installing aborted
Can someone help me to finally install the ROM?
Thank you so much,
Max
You also need to install the kernel.
Something like this a few lines above?
assert failed: getprop("ro.product.device") == "LT18i" || getprop("ro.build.product") == "LT18I" || getprop("ro.product.board") == "LT18i"
T-119a said:
Something like this a few lines above?
assert failed: getprop("ro.product.device") == "LT18i" || getprop("ro.build.product") == "LT18I" || getprop("ro.product.board") == "LT18i"
Click to expand...
Click to collapse
Nope, this is the full protocol:
Finding update package...
Opening update package...
Installing update...
set_perm: some changes failed
E:Error in /sdcard/cm-10-20120731-UNOFFICIAL-anzu.zip
(Status 7)
Installation aborted.
Just for information. The first thing I've done after installing CWN was straight installing the .zip . I did not flashed the kernel or wipe. Maybe that has something to say?
EDIT: Oh, and after every try to install the ROM my phones hangs up at the "SONY" logo and won't boot. I always have to flash the original sony .ftf to make it run again :/
Thank you,
Max
Open the cm-10-20120731-UNOFFICIAL-anzu.zip with a zip viewer, extract the boot.img and flash it via fastboot. Then perform a Full Wipe and try to flash the ROM again.
T-119a said:
Open the cm-10-20120731-UNOFFICIAL-anzu.zip with a zip viewer, extract the boot.img and flash it via fastboot. Then perform a Full Wipe and try to flash the ROM again.
Click to expand...
Click to collapse
I will try that, but I need a unlocked bootloader for that all, right? Or isn't that necassary at all?
maexjen said:
I did not flashed the kernel or wipe. Maybe that has something to say?
Click to expand...
Click to collapse
Yep.
maexjen said:
I will try that, but I need a unlocked bootloader for that all, right? Or isn't that necassary at all?
Click to expand...
Click to collapse
If you want to flash cyanogen you have to unlock your bootloader. An unlocked bootloader is recommend for flashing custom Roms and kernels.
Thank you for your clarification! It's working now! =)
T-119a said:
Something like this a few lines above?
assert failed: getprop("ro.product.device") == "LT18i" || getprop("ro.build.product") == "LT18I" || getprop("ro.product.board") == "LT18i"
Click to expand...
Click to collapse
Hello... I'm flashing new ROM and facing Status 7 error with what you said at the front... Here's the error message:
assert failed: getprop ("ro.product.device") == "c8812" | | gerprop ("ro.build.product") == "c8812" | | getprop ("ro.product.device") == C8812 "| | getprop (" ro.build.product ") ==" C8812 "
E: Error in / sdcard/C8812_20120822005.zip
(Status 7)
Installation aborted.
Can I know the cause of this and how to overcome that? Please & Thanks!
I'm getting this exact same problem on my Arc S except with cm10 Fxp138. My bootloader is unlocked, im rooted, i flashed the kernel first and STILL i get Status 7 error installation aborted. If someone could help, that'd be great
I am also getting the same error but on Sony LWW with Pacman JB ROM.
I also got this status 7 error with the code "Status 7 - symlink: some symlinks failed".
After deleting the first line (before the ; sign) I could get the rom to install.
I would like to know, why / how this can happen... Maybe flashing a false kernel or other things?
I think maybe binary and script don't match each other; or maybe there's error in text of script
(sorry for my bad english)
try to flash the kernel lupus
Firstly, give us recovery log. Secondly, I had such an issue with CM7.1 quite long time ago. I've fixed it by changing phone's ID from LT18i to LT15i via fastboot. There's a proper command for it.
1. Go to CWM
2. Plug phone
3. "adb pull tmp/recovery"
WHAT ?
Try a full wipe ( data , cache )
CM10 on my ARC
I have the same, install new baseband upper then 70 or official ics 4.0.4 then use flashtools to install kernel and flash rom
You have unlocked bootloader ??
i have "Status 7 - symlink: some symlinks failed" when i try install Jelly-v4.zip. anyone help me, i have downloaded that rom 3 times but it can't help
meinmain said:
Hello... I'm flashing new ROM and facing Status 7 error with what you said at the front... Here's the error message:
assert failed: getprop ("ro.product.device") == "c8812" | | gerprop ("ro.build.product") == "c8812" | | getprop ("ro.product.device") == C8812 "| | getprop (" ro.build.product ") ==" C8812 "
E: Error in / sdcard/C8812_20120822005.zip
(Status 7)
Installation aborted.
Can I know the cause of this and how to overcome that? Please & Thanks!
Click to expand...
Click to collapse
I had a lot of frustration with this. Had many attempts. The only thing that seemed to work for me was to flash the doomlord kernel. Then it worked perfectly.
I get the following error when I try to flash CM and I read around people saying to "flash stock" but I downloaded LT15a arc_v2.3.4, 4.0.2.A.0.42_Generic America.ftf and it won't flash via the flash tool (dragged and dropped into the window and it just fails to install)
Does anyone have any suggestions on which stock rom I need or a way around this?
-------------------------
--Installing: /sdcard/FXP127-cm-9-20120630-UNOFFICIAL-anzu.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "LT18i" || getprop("ro.build.product") == "LT18i" || getprop("ro.product.device") == "LT18a" || getprop("ro.build.product") == "LT18a" || getprop("ro.product.device") == "LT15i" || getprop("ro.build.product") == "LT15i" || getprop("ro.product.device") == "LT15a" || getprop("ro.build.product") == "LT15a" || getprop("ro.product.device") == "anzu" || getprop("ro.build.product") == "anzu"
E:Error in /sdcard/FXP127-cm-9-20120630-UNOFFICIAL-anzu.zip
(Status 7)
Installation aborted
Murmur95 said:
or a way around this?
-------------------------
--Installing: /sdcard/FXP127-cm-9-20120630-UNOFFICIAL-anzu.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "LT18i" || getprop("ro.build.product") == "LT18i" || getprop("ro.product.device") == "LT18a" || getprop("ro.build.product") == "LT18a" || getprop("ro.product.device") == "LT15i" || getprop("ro.build.product") == "LT15i" || getprop("ro.product.device") == "LT15a" || getprop("ro.build.product") == "LT15a" || getprop("ro.product.device") == "anzu" || getprop("ro.build.product") == "anzu"
E:Error in /sdcard/FXP127-cm-9-20120630-UNOFFICIAL-anzu.zip
(Status 7)
Installation aborted
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1884746
XperienceD said:
http://forum.xda-developers.com/showthread.php?t=1884746
Click to expand...
Click to collapse
Thanks for the reply. I actually tried that before posting and it just gets stuck at the sony logo on boot.
-Flash via sony update service
-Flash kernel 562
-Doomlord root
-flash 587 kernel
-install CWM via flashtool
-modify the buildprop
-copy to SD
-Reboot recovery
-Installs & fails to reboot properly
Murmur95 said:
Thanks for the reply. I actually tried that before posting and it just gets stuck at the sony logo on boot.
Click to expand...
Click to collapse
That's because you haven't flashed the FXP kernel.
XperienceD said:
That's because you haven't flashed the FXP kernel.
Click to expand...
Click to collapse
Ok, so I downloaded the kernel and when I read the guide it says put the phone is fastboot mode but I have no idea how to do that and when I try to reboot into fastboot via flashtool it just reboots the phone normally (cmd adb reboot fastboot = reboots the phone normally) . When I use the command fastboot flash boot <kernel>.img it just says waiting for phone.
Anything else I read just tells me to unlock the bootloader (which I did via zerg rush)
I really appreciate the help but this phone is a co-workers and I am trying to install a custom rom for them and I hope to get it done ASAP so they can get it back. I never had this much issue with my Gal S & S3...
To use fastboot you must first unlock your bootloader.this cannot be done via Zergrush,only rooting your phone can be done with Zergrush,now,put the 4.0.2.a.0.42 file(unzipped)into the 'firmwares' folder that came with flashtool then press the lighting icon to flash your phone,when done,use Zergrush to root it and install x-parts from the market which helps you can install CWM which you need to install a custom ROM.
Sent from my LT18i
I have searched forums and tried all the fixes listed.
My CWM recovery is 6.0.1.5 - the newest i can find.
I rooted and running stock Rogers (I'm a canadian rogers user)
I have downloaded multiple times (using the net and file transfer/Rommanager/and directly to my sdcard (internal and external):cm-10.0.0-d2att.zip (i would like to run the stable version rather than a nightly until i am used to it)
I always wipe data as well i have tried wiping the cache and dalvik cache as well
and still every time I try to install CM 10 on my phone, it just says:
Installing update...
script aborted: assert failed: getprop("ro.product.device") == "d2att" || getprop("ro.build.product") == "d2att"
assert failed: getprop("ro.product.device") == "d2att" || getprop("ro.build.product") == "d2att"
E:Error in /sdcard/cm-10.0.0-d2att.zip
(Status 7)
The complete and total log from when i installed using RomManager is also something i can post if needed?
CWM 6.0.1.5 is not the one you should be using. You need CWM 6.0.1.4 for the sgs3 att.
Try using twrp
check this out I had the same issue on telus
http://forum.xda-developers.com/showpost.php?p=30331732&postcount=2
hope that helps
mrhaley30705 said:
Try using twrp
Click to expand...
Click to collapse
TWRP did the trick. thanks everyone!
whenever i try to upgrade my phone, i get assert errors:
Code:
-- Installing: /sdcard/cmupdater/cm-10.1.3-d2att.zip
Finding update package...
I:Update location: /sdcard/cmupdater/cm-10.1.3-d2att.zip
I:using /data/media for /sdcard/cmupdater/cm-10.1.3-d2att.zip.
Opening update package...
Installing update...
Warning: No file_contexts
script aborted: assert failed: getprop("ro.bootloader") == "I747UCDLK3" ||
getprop("ro.bootloader") == "I747UCDMG2" ||
getprop("ro.bootloader") == "I747MVLDLK4" ||
getprop("ro.bootloader") == "I747MVLDMF1" ||
getprop("ro.bootloader") == "I747MUMBLK3" ||
getprop("ro.bootloader") == "I747MUMBLL1"
assert failed: getprop("ro.bootloader") == "I747UCDLK3" || getprop("ro.bootloader") == "I747UCDMG2" || getprop("ro.bootloader") == "I747MVLDLK4" || getprop("ro.bootloader") == "I747MVLDMF1" || getprop("ro.bootloader") == "I747MUMBLK3" || getprop("ro.bootloader") == "I747MUMBLL1"
E:Error in /sdcard/cmupdater/cm-10.1.3-d2att.zip
(Status 7)
Installation aborted.
i've applied the firmwares in this thread so that my unlocked phone works on tmobile. my bootloader reads as:
Code:
C:\Users\IncogNegro\android developer toolkit\sdk\platform-tools>adb shell getprop ro.bootloader
T999UCALJ2
i keep trying to install stable roms from here using this guide. i have successfully upgraded the bootloader by following all the steps under the section titled "Installing a custom recovery on Galaxy S III (AT&T)". as a result, my recovery is CWM v6.0.3.1.
i've even gone as far as editing the updater script by removing all the assert tags. when i try to install, the installation fails without ANY ERROR MESSAGES.
what is the big deal!?
I'm having the same problem as well, My phone is rooted im stuck on stock 4.3 and really want to try the new custom roms out there.
aepowerlifter said:
I'm having the same problem as well, My phone is rooted im stuck on stock 4.3 and really want to try the new custom roms out there.
Click to expand...
Click to collapse
i am stuck in the same situation. i want to flash beanstalk sooo bad but it keeps failing. you can flash slimbean though. that's the only rom that i found that is flashable.