Develop Bugs

[MOD] Hulu Hack GB/ICS 11.1.115.12

Ok guys, so I absolutely love Hulu and other legit TV sites, some of which prohibit mobile devices based on a "flash id" similar to what you have with a User Agent string for the browser. It is based on this ID that it prohibits mobile phones from accessing content such as hulu and HBO (I think?). With this mod your phone will appear as though it is a PC running flash and I believe it also modifies your version number to be something like 99.9.999.99 for sites that try and check the version number. I also must make sure to give credit where credit is due. Credit goes to imneveral0ne who posted the modified lib files in the Thunderbolt forums http://forum.xda-developers.com/show...6#post12433036.
His mod stopped working because Gingerbread (and 10.3) copies the lib files from the APK itself back into the lib folder (/data/data/com.adobe.flashplayer/lib/) on boot, thus require the mod be redone every reboot. I simply took his mod, wrote a simple script that installs the hacked lib files to /data/flash/ at first for storage, modifies permission of /data/data/com.adobe.flashplayer/lib/ so that it can be written to by the script, and also installs a "run on boot" script at /system/etc/init.d/01-fixflash.sh which will copy the hacked lib files from /data/flash to /data/data/com.adobe.flashplayer/lib/. It also adds Hulu Bookmark app (1.0) to /data/app.
REQUIREMENTS:
Kernel with init.d support (most custom kernels with root support) and root
Busybox (for running the copy commands. If you don’t have it, install ‘busybox installer’ from the market once you are rooted)
Root explorer (recommended, not required)
NOTE: I have developed this file FOR gingerbread.
INSTRUCTIONS:
Install latest flash player (11.1.115.12) from the market FIRST and be sure to uncheck automatic updates (and don't manually either)
Make sure busybox is installed. One way to test this is to type cp –help in ADB and see if it can run the command. If it does, you’re good to go.
Next, simply flash the zip. Wipe cache/dalvik if you want (I don't believe it's necessary, although again, this is my first time and for whatever reason the script doesn't seem to want to run on its own the first time)
Upon first reboot, you MAY be lucky enough that it simply just works and you’re all set.If you still get the “Hulu not available for your platform” error, simply use either root explorer or adb to run the script for the first time manually. In root explorer, navigate to /system/etc/init.d, tap on S98fixflash and select “execute”. In ADB, navigate to /system/etc/init.d and type ‘sh S98fixflash’. Wait a sec for it to run, then try Hulu again. It should be working immediately (without a reboot required) AND the script should then run correctly on subsequent reboots.
Like I said this is my first "product" I've been able to make available to the community and am more than open to suggestions, criticisms and ideas of how I can make this script better. Enjoy guys!
EDIT: If you do have issues with the script not running on every reboot, simply install "Script Manager" from the market, navigate to /system/etc/init.d, select S98fixflash and check the "run on boot" checkbox.
NOTE: ICS Only version now (least as far as I know). May work on others, please let me and others know if it does work on GB
File is now attached to post due to multiupload being unavailable -
UPDATE 6/26/2012 for 11.1.115.12
Note: after more feedback it seems using busybox installer from the market helps if running the script, even manually does nothing.

ahh too much to do
cba

Sorry, lots of explaining. If your rooted just update flash to latest in market, uncheck auto update adobe flash, then flash the zip. Should just work like it did on my gsII.
Sent from my GT-I9100 using XDA App

A query
I was going thru your update-script. What does this line do?
Code:
set_perm(0, 2000, 0755, "/system/etc/init.d/01-fixflash.sh");
I did not find a 01-fixflash.sh in /system/etc/init.d folder, only S98fixflash?

sileshn said:
I was going thru your update-script. What does this line do?
Code:
set_perm(0, 2000, 0755, "/system/etc/init.d/01-fixflash.sh");
I did not find a 01-fixflash.sh in /system/etc/init.d folder, only S98fixflash?
Click to expand...
Click to collapse
Oops, your right. Sorry I quickly modified this script from my old one I used on my epic and forgot to change that line. Will repair and repost now...
http://www.multiupload.com/VJWDKZ23FR

compuw22c said:
Oops, your right. Sorry I quickly modified this script from my old one I used on my epic and forgot to change that line. Will repair and repost now...
http://www.multiupload.com/VJWDKZ23FR
Click to expand...
Click to collapse
No problem. I already made the necessary changes. Will help others.
Sent from my GT-I9100 using Tapatalk

Cool. Also, it did work for you after those changes correct?
Sent from my SPH-D700 using XDA App

Note: after more feedback it seems using busybox installer from the market helps if running the script, even manually does nothing.
Sent from my GT-I9100 using XDA App

update 9/5/2011 for 10.3.186.6 AND hopefully fixed data mounting issues on certain devices so it works easily on CWM on more devices
NOTE: Latest update includes a brand new flashplayer.so files freshly edited, so no more issues with youtube in the browser, and uses TRUE flash 10.3.186.6 libraries for increased performance (no longer based on 10.2)

does nothing no matter what on kh3 deodexed

I'm using it now on litening 6.1 (kh3) just fine with nymphetamine kernel. This thread is also in the epic 4g forums. Troubleshooting instructions are there a well as the op. Understand what the mod does by reading, then find out where its getting hung up. I guarantee if you read you'll find your problem. Sorry but I keep having to help people read my own posts... First guesses, reflash, check to see files were installed, run busybox installer,.try another kernel with working init.d support... Run script manually?

Nice work. Any way of getting this to work for HC on the Xoom?

Maybe, try it let me know. Our buy me a 10.1

compuw22c said:
Maybe, try it let me know. Our buy me a 10.1
Click to expand...
Click to collapse
LOL! Nah didn't work for me.

Actually I feel I remember it working fire xoom.maybe try the manual troubleshooting in the op. find and replace libflashplayer.so with what's in the zip

it won't let me even flash the file says:
E: Error in /sdcard/gb_hack_flash_hulu10.3.186.6.zip
(Status 0)
Installation aborted.

all you need to do to get it to work is to extract the libflashplayer.so from the zip the op posted and copy it to (and replace) the libflashplayer.so in
Code:
/data/flash/libflashplayer.so
and
Code:
/data/data/com.adobe.flashplayer/lib/libplayerflash.so
do this using root explorer
this also enables crackle as well
there is no need to run a script

Beautiful, tried so many things in the past, and this works beautifully! Thanks!

Um, at the risk of sounding like a complete euro-dummy: What is Hulu, what does this hack do? Perhaps a bit of description in the first post?

ogdobber said:
all you need to do to get it to work is to extract the libflashplayer.so from the zip the op posted and copy it to (and replace) the libflashplayer.so in
Code:
/data/flash/libflashplayer.so
and
Code:
/data/data/com.adobe.flashplayer/lib/libplayerflash.so
do this using root explorer
this also enables crackle as well
there is no need to run a script
Click to expand...
Click to collapse
Yes but when you reboot with 2.3 or higher it replaces those files again back to stock.

[HOW TO][MOD] V6 SuperCharger Script

Hi all,
I own no credits to this mod/script, it's all put together by zeppelinrox, Thanks go out to him for this! Orginal thread can be found here.
http://forum.xda-developers.com/showthread.php?t=991276
This is the first post of this kind I have ever made, so it might not be that good, or any help at all, but for those who want to try this script for the first time, I shall try my very best to explain how to do so.
I had been running ROMS for my Nexus with the V6 SuperCharger built in, and decided to see if it'll run well on our humble little Tabs. And indeed it does, it could be a placebo of course, but I seem to notice a good difference.
First, there are a few requirements in order to use this script :-
You NEED to be Rooted, in order to do this (if you aren't already) you could try the excellent Quick and Easy Root Script by the genius Crossix http://forum.xda-developers.com/showthread.php?t=1472521
Download and Install Script Manager from the Market
https://market.android.com/details?id=os.tools.scriptmanager
You also need to have BusyBox installed for the script to be run, I suggest installing the Script attached to the above V6 SuperCharger thread (even if you already have BusyBox installed to avoid errors). Simply scroll to the bottom of the thread and download the file named "busybox_v1.19.3_installer_script_wraithdu.zip"
To install this version of BusyBox navigate to where you saved the ZIP file, if on the Tab it should have downloaded to "/mnt/sdcard/Download", extract it using your file manager, I use ES File Explorer. Then open Script Manager and navigate to the extracted folder, find the script that should be called "busybox_v1.19.3_installer_wraithdu.sh", open this and select the "su" icon, make sure it is selected as a script and not executable.
To Run the Script:-
Scroll to the bottom of the SuperCharger thread and Download the file named " V6_SuperCharger_for_Android-update8.sh.txt" Navigate to where this file is downloaded, if on the Tab it should have downloaded to "/mnt/sdcard/Download", rename it using your favourite file manager, usually via a long-press to "V6_SuperCharger_for_Android-update8.sh"
Then open Script Manager and navigate to the script, open it using script manager, again taking care to run it as "su" as a script not an executable. The script should Run and prompt you for an option numbered 1-17. I chose Option 2, which is Aggressive Level 2 and noticed a good improvement, you can of course opt for the balanced options of 3 or 4. To input a number touch the screen and the on screen keyboard should pop up, hit a number and enter it.
The Script Should run and then prompt you for another option, don't choose another one just yet.
If you are running the excellent build.prop by Crossix, Icewyng et al, it is recommended to disable the device keeping Launcher in memory for the script to run properly. To do this, open Root Explorer, navigate to the build.prop, in "/system", and open it in the text editor. Scroll to the part of the prop file that begins "store launcher in memory" and change the below string to "ro.HOME_APP_ADJ=0"
In order for this to be a persistent change to how RAM is managed on our Tabs, a script has to be set up to be run at boot. To do this, in Script Manager, navigate to "/data" and open the script named "99SuperCharger.sh", and check the boxes of "su" along with "boot" to run it at boot.
After you have followed these steps reboot your Tab and you *should* see a snappier Tab
Please be aware that this is the very first HOW TO I have ever written, and it will probably be inaccurate and crap. So, please, feel free to correct my errors and I will try to help running the script.
Yours,
Toyface

Awesome scripts. Im going to give it a try here in a bit and see if there is a difference in performance.

Could someone confirm if this really works?

I just did this and have notices an improvement but do follow instructions carefully
Sent from my A500 using xda premium

I can't download the update 8 sh.txt file it just opens it in my browser

I used taptalk to download it it worked great and is still working its magic
Sent from my A500 using xda premium

Super huge improvement. Thank you!

rando152 said:
I can't download the update 8 sh.txt file it just opens it in my browser
Click to expand...
Click to collapse
Which browser are you using? If chrome on the PC, try a right click and save as a txt file and rename it as a file ending .sh
Sent from my A500

Thanks for all the cool info. Using info I found in sin threads Skype seems to stay running for hours now instead of just 15 Minutes.
Sent from my modified A100 using Tapatalk and SlideIT keyboard.

so far so good.
Just had time to get this installed. So far it seems to be a bit snappier. Wish i had thought to benchmark first. Grrrr....

I think this should be in the dev section, I might ask to have it promoted... Good Work!

Frankly the whole you cant modify his script deal is a HUGE turn off. I understand him wanting credit for his hard work, BUT wth. I'll stick to safer things.
EDIT: Forget what I said I completely miss understood what he says in his post. He says
"Personal Use: You may tweak the V6 installation script (leaving credits intact) to your own personal liking as long as it is NOT redistributed in any way."
His autostart script script looks very handy. I was considering trying Gscript already here is a new reason hehe.

NoSudo said:
Frankly the whole you cant modify his script deal is a HUGE turn off. I understand him wanting credit for his hard work, BUT wth. I'll stick to safer things.
EDIT: Forget what I said I completely miss understood what he says in his post. He says
"Personal Use: You may tweak the V6 installation script (leaving credits intact) to your own personal liking as long as it is NOT redistributed in any way."
His autostart script script looks very handy. I was considering trying Gscript already here is a new reason hehe.
Click to expand...
Click to collapse
I can see why he doesn't want redistributables floating around, even with the open source (something I feel very strongly about) nature of the forum.
All I wanted to do was spread the word, maybe help along the way, if I've done this then I'm happy
Sent from my Nexus S using xda premium

NoSudo said:
His autostart script script looks very handy. I was considering trying Gscript already here is a new reason hehe.
Click to expand...
Click to collapse
You can also auto start scripts without having to use script manager or any other scripting program by calling them from within install-recovery.sh (see my sdswap mod).
For example if you had a script /data/app/supercharger.sh
in install_recovery.sh you'd add a line sh /data/app/supercharger.sh

crossix said:
You can also auto start scripts without having to use script manager or any other scripting program by calling them from within install-recovery.sh (see my sdswap mod).
For example if you had a script /data/app/supercharger.sh
in install_recovery.sh you'd add a line sh /data/app/supercharger.sh
Click to expand...
Click to collapse
Cool. I have re-written another version of my hulu script in .sh and set it up to be able to run in a normal verbose mode, or to accept "silent" as a command line argument to redirect output to a lhulu.log file instead to better allow for the option of running at startup like a cron entry or what ever our allowed methods are on android.(like the one you just referenced, thanks) I'm planning on playing with it a little to figure out the best and easiest method. Then repost the updated version that can be a semi permanent fix.

NoSudo said:
Cool. I have re-written another version of my hulu script in .sh and set it up to be able to run in a normal verbose mode, or to accept "silent" as a command line argument to redirect output to a lhulu.log file instead to better allow for the option of running at startup like a cron entry or what ever our allowed methods are on android.(like the one you just referenced, thanks) I'm planning on playing with it a little to figure out the best and easiest method. Then repost the updated version that can be a semi permanent fix.
Click to expand...
Click to collapse
install-recovery.sh won't work for the hulu lib, sometime after that script is loaded all the apks libs get extracted for whatever reason. Unless you put a wait in there for the prop sys.boot_complete or something like that. Might also need to use busybox run-parts for a seperate init.d script, not sure if the wait would actually stop the rest of the boot process.

It should be fine, install_recovery is called really late in the boot process you're right about putting the waits in, if you look at my swapscript you'll see the amount of time I used to get it to work (and it does not pause the other processes).
Sent from my MB860 using XDA App

crossix said:
It should be fine, install_recovery is called really late in the boot process you're right about putting the waits in, if you look at my swapscript you'll see the amount of time I used to get it to work (and it does not pause the other processes).
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
It's not as late as I previously thought myself. dmesg won't work at that point and getting a logcat from there you'll see it's the start of the system log just when vold starts up. Which is why you need a few sleeps in your script. Using it was my second attempt at 2nd-init, which wasn't possible until after my first bootloop, the boot animation starts later but also before the libs are replaced.
For hulu I've just been running a gscript after a reboot because of this, at least until I find a different solution.
Anyway install-recovery is the perfect spot for any kind of kernel tweaks and also SuperCharger.
@toyface sorry for being off topic

Sorry a little confused with the last part how do I navigate to /data in script manager?
Edit.. never mind. ma bad noob moment, couldn't for the life of me figure out how to get out of the mnt part of the directory.
Sent from my A100 using Tapatalk

[Q] Installing V6 Supercharger Help!

How do I install the V6 Supercharger script from the galaxy w on stock rom?

Well as far as i know, the script itself only need su / root permission to launch, not a custom rom .
So i think how to install it is still quite the same :
(From Kezra in his thread : http://forum.xda-developers.com/showthread.php?t=1438452)
Instructions for V6 Supercharger
(1) Download this file and put in somewhere in your memory card
(2) Go to the Market and download "Script Manager"
(3) Open Script Manager and go to Config and choose "Browse as Root"
(4) Browse to where the script is and choose it
(5) Select only the ROOT symbol and then RUN
(6) First choose option 2 and when asked again choose option 6 (if you feel like taking a chance, choose option MEGA RAM 2) and V6 will install.
(7) After you are done with installing browse to /data/ in the memory of the phone, a file called 99SuperCharger.sh will be there
(8) Choose it, select run at boot
(9) Reboot and you should be done, enjoy.
Click to expand...
Click to collapse
Sent from my GT-I8150 using Tapatalk

Here is the original post:
http://forum.xda-developers.com/showthread.php?t=991276
I just ran the script on my W - works amazing!!! you will feel a change in speed and lag.
my only problam is that it closes my Go keyboard if i do "clear memory".

I have a problem. I tried to install this scrip like in the describtion. But the most messages I get is " not found"! What I made wrong? I have a rooted stock-rom.
Gesendet von meinem GT-I8150 mit Tapatalk

Edea said:
I have a problem. I tried to install this scrip like in the describtion. But the most messages I get is " not found"! What I made wrong? I have a rooted stock-rom.
Gesendet von meinem GT-I8150 mit Tapatalk
Click to expand...
Click to collapse
In the scrip manager you must check run as root, after you select the V6 scrip, click the su logo and run, just follow the instruction given step by step.

It doesn´t work here too. Error is "87: Syntax error: expecting "in""
Busybox in version 1.18.2 is installed.

Have you installed busybox?

No one got an idea about the error i posted?

tanktoo said:
It doesn´t work here too. Error is "87: Syntax error: expecting "in""
Busybox in version 1.18.2 is installed.
Click to expand...
Click to collapse
tanktoo said:
No one got an idea about the error i posted?
Click to expand...
Click to collapse
What version of V6 Sc you got??
latest version, V6 SuperCharger Update 9 RC7 is here:
http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
Some posts above are giving Update 8.....
you using script manager??
I will get back later with more fuller instructions!!!

Yes scriptmanager. I will try the new version.
Edit: it´s installing now.

Is my phone supercharged now (see pics) ?
Because i don't see (feel) much difference
thnx

diederikmo said:
Is my phone supercharged now (see pics) ?
Because i don't see (feel) much difference
thnx
Click to expand...
Click to collapse
U can run V6 supercharge script and check all the status there. It will show the percentage of supercharge.
Of course, u might not "feel" it. But ur phone has better multitasking and ram management then before.

Darn Rebooting Cycle
i tried the newest supercharger and i have done all the correct setting on stock rom.
it was all going perfect then when i reboot my phone it loads up normally then after 25seconds it reboots over and over again. to stop this i have to remove the memory card from the device
i quickly undone the script and deleted the 99 data file.
For all of this rom and kernel and flashing is much more complicated than the ios jailbreaking. and i try to do it. wipe my phone and all of the instructions but it never works for me. i have rooted my phone.
and a question what is your default VM heap and what are you currently using.
finally when i first got my phone the version was 2.3.6 now is 2.3.5.

I installed. Exit the script. Then went to data. I saw that 99supercharger.sh....clicked....it showed: "open as", but cannot choose to set on boot or sth. now restore my rom and install again. Can you teach me as soon as possible?

Brian_SGW_CM9 said:
I installed. Exit the script. Then went to data. I saw that 99supercharger.sh....clicked....it showed: "open as", but cannot choose to set on boot or sth. now restore my rom and install again. Can you teach me as soon as possible?
Click to expand...
Click to collapse
Did u open the 99supercharger.sh file from script manager?
It should be work if u do that... Set for "su" and "boot" then..
Sent from my GT-I8150 using XDA

Here's what i did on mine.
1. Download V6 SuperCharger Starter Kit. This includes the latest busybox and all you need to start.
2. Download Supercharger script(i use the RC8.2).
3. Before you run any supercharge script MAKE SURE that you uninstall any memory management application(eg. Ram Manager, etc, etc,) or else it won't run and gives an error "cr-app".
4. Run the StarterKit, just run StartMeUp.sh to install everything at once.
5. Run The RC8.2 (incase the keyboard doens't show just long press on the screen and choose "Select Input Method" and choose your prefered keyboard, thanks to mohza).
6. Somewhere on the process you would need to choose on build.prop or local.prop, Choose Build.prop because sometimes the Local.prop doesn't stick.
7. After the configurations, you need to choose on what you want to run, Choose Number 7 or the Aggressive Super Ledded (higher OOM its 125mb :highfive: , if you doesn't know what i mean just ignore this ).
8. Install the Nitro Lag Nullifier(experimental but who knows?).
9. That's it, there's something displayed there(just search for it) on how many
percentage your supercharge is, if its 100% then your done, oh and make a widget for 99supercharge.sh incase you need to run it next time when it won't run on boot.
10. try some experiment
NOTE: Anything you can see that is not included on the steps i provided means you are the one who needs to decide and those doens't affect much.
Hope this helps :good:

Hi guys, who can give me the tutorial to install V6 Supercharger ? ? Please .....

V6 SuperCharger Script

Guys I looked around and didnt find anything regarding our phones and this script so I decided to post it here. If I missed it and there is a thread about it, forgive me.
Recently the developer updated his script so it can run on ICS too. Is anyone running the script?? Would it be useful for our phones?
http://forum.xda-developers.com/showthread.php?p=16635544#post16635544

atsavlis said:
Recently the developer updated his script so it can run on ICS too. Is anyone running the script?? Would it be useful for our phones?
Click to expand...
Click to collapse
Nope.
and
Probably not much use at all. Zeppelinrox originally created it for phones with low amounts of memory (originated on the milestone which has 256mb and would constantly kill the launcher etc), I'm not sure if anythings changed now in the script, but we have heaps of memory, and I just don't see the point.

That's weird... this device has the most supercharged services.jar downloads...
http://android.mimic.ca/

Hmmmm, interesting... Hopefully someone who has an idea can shine some light for us. There must be a reason the script developer created a section specifically for ICS??

atsavlis said:
Hmmmm, interesting... Hopefully someone who has an idea can shine some light for us. There must be a reason the script developer created a section specifically for ICS??
Click to expand...
Click to collapse
Shhhh! He's behind you ........

I think this could potentially be a problem with DroidTheory's SHO script in this AXIOM XBREAD.
I don't know but I guess zeppelin can find out for us? :O

It did wonders for my Samsung Captivate.
I'm currently running it on the latest AOKP build, but it was one of the first things I installed. So I don't really have a feel for what the Nexus is like without it.

TwinkyOfHope said:
It did wonders for my Samsung Captivate.
I'm currently running it on the latest AOKP build, but it was one of the first things I installed. So I don't really have a feel for what the Nexus is like without it.
Click to expand...
Click to collapse
What options are you using?

TwinkyOfHope said:
It did wonders for my Samsung Captivate.
I'm currently running it on the latest AOKP build, but it was one of the first things I installed. So I don't really have a feel for what the Nexus is like without it.
Click to expand...
Click to collapse
Could you give us a quick rundown of what you did?? Specifically did you do that whole process about ODEX/DEODEX roms??

Make sure you have terminal emulator before replacing your services.Jar!
First use root browser to copy your services.Jar to your sdcard it is in the /system/framework folder.
Then go to http://android.mimic.ca and upload your services.Jar file.
Afterwards, I downloaded the modified services.Jar because the flashable cwm option didn't work for me.
I copied the modified services.Jar to /system then changed its permissions to the same permissions of the other .jar files in the /system/framework folder.
Then move the services.Jar with changed permissions to the /system/framework folder.
Once you have done that, open up terminal emulator.
Type this out, and press enter when said:
Su enter
Cd /system/framework enter
Chown 0.0 services.Jar enter
Chmod 644 services.Jar enter
Then reboot!
Start Up script manager.
Browse to the supercharger v6 pdf and click on it. Press su to run the script with superuser permissions.
The script will load and is mostly self explanatory. It will take you through the options when you first run it. I put the text scrolling on fast and disable the animation and integrate when it asks.
When you get back to the main menu, I usually use option 10. It calculates what minfree values to use based on the ram of the phone.
After all this, reboot once more and run the script again to see if you are 100% supercharged!
EDIT: if you run into bootloops by moving your services.Jar incorrectly, then just reflash your rom without wiping.
Sent from my Galaxy Nexus using XDA

Option 10 asks us to input our own Ram value, is this correct?? If so, what did you set it to?

atsavlis said:
Option 10 asks us to input our own Ram value, is this correct?? If so, what did you set it to?
Click to expand...
Click to collapse
Option 10 shouldn't ask you to input anything else. It should use the minfree calculator and set itself. Are you using update9 RC7? If it still isn't working for you, then try option 8 which should be the 768 settings
Sent from my Galaxy Nexus using XDA

i followed everything but when i run the first line of code i get
sh: cd/system/framework: not found
not sure if its because of the binary

You're missing a space.

zeppelinrox said:
You're missing a space.
Click to expand...
Click to collapse
thanks i just noticed that. funny thing is when i was on liquids rom they had a cwm zip file to flash for that rom and was able to bypass the cd /system/framework, enter, chown 0.0 services.jar, enter, chmod 644 services.jar, enter stuff. i am not sure if the stuff carried over but it let me run it on aokp31 release without it and it runs smoothly. phone is exactly the way i want it super snappy

Any use of the script on stock jelly bean?
Sent from my Galaxy Nexus

v6 superchrger on cm10 official?

hey, i as wondering. does anyone know how i can getv6 supercharger script to run on cm10
official. i know that there is something you have to do special to get it run on a jellybean rom.
i know it;s asking a lot but is it possible for someone to give me step by step to make it simple.
i went to the v6 page but could not figure it out...
thanks in advance...

I had no problem getting it to install on jb. Do you have the script downloaded and script manager from the play store?
Run script manager and allow root access when it request it. Navigate to v6 script and click it and then click the android icon the looks like cross bones (the su one) then click run.
From there select your options. I always select the fastest text,which is 0, then the option you wanna use, let's say #3 then run it and if you scroll up and read the text you misses (assuming you selected 0 earlier) it should say somewhere "if this is your first super charger please reboot...." so reboot phone, which is "17 on the options list then run it again except after you select text speed it should say under the options that you are super charges and launcher is hard to kill
Sent from my SGH-T989 using xda premium

skaroger867 said:
I had no problem getting it to install on jb. Do you have the script downloaded and script manager from the play store?
Run script manager and allow root access when it request it. Navigate to v6 script and click it and then click the android icon the looks like cross bones (the su one) then click run.
From there select your options. I always select the fastest text,which is 0, then the option you wanna use, let's say #3 then run it and if you scroll up and read the text you misses (assuming you selected 0 earlier) it should say somewhere "if this is your first super charger please reboot...." so reboot phone, which is "17 on the options list then run it again except after you select text speed it should say under the options that you are super charges and launcher is hard to kill
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
i will try, thanks for reply...